aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty/serial/atmel_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/atmel_serial.c')
-rw-r--r--drivers/tty/serial/atmel_serial.c1194
1 files changed, 971 insertions, 223 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 922e85aeb63..c4f75031410 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -35,21 +35,21 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/atmel.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/irq.h>
#include <asm/io.h>
#include <asm/ioctls.h>
-#ifdef CONFIG_ARM
-#include <mach/cpu.h>
-#include <asm/gpio.h>
-#endif
-
#define PDC_BUFFER_SIZE 512
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
@@ -60,6 +60,8 @@
#include <linux/serial_core.h>
+#include "serial_mctrl_gpio.h"
+
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
@@ -98,6 +100,8 @@ static void atmel_stop_rx(struct uart_port *port);
#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
+#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
+#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
@@ -113,9 +117,6 @@ static void atmel_stop_rx(struct uart_port *port);
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
-static int (*atmel_open_hook)(struct uart_port *);
-static void (*atmel_close_hook)(struct uart_port *);
-
struct atmel_dma_buffer {
unsigned char *buf;
dma_addr_t dma_addr;
@@ -140,13 +141,25 @@ struct atmel_uart_port {
u32 backup_imr; /* IMR saved during suspend */
int break_active; /* break being received */
- short use_dma_rx; /* enable PDC receiver */
+ bool use_dma_rx; /* enable DMA receiver */
+ bool use_pdc_rx; /* enable PDC receiver */
short pdc_rx_idx; /* current PDC RX buffer */
struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
- short use_dma_tx; /* enable PDC transmitter */
+ bool use_dma_tx; /* enable DMA transmitter */
+ bool use_pdc_tx; /* enable PDC transmitter */
struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+ spinlock_t lock_tx; /* port lock */
+ spinlock_t lock_rx; /* port lock */
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct dma_async_tx_descriptor *desc_tx;
+ struct dma_async_tx_descriptor *desc_rx;
+ dma_cookie_t cookie_tx;
+ dma_cookie_t cookie_rx;
+ struct scatterlist sg_tx;
+ struct scatterlist sg_rx;
struct tasklet_struct tasklet;
unsigned int irq_status;
unsigned int irq_status_prev;
@@ -154,11 +167,22 @@ struct atmel_uart_port {
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
+ struct mctrl_gpios *gpios;
+ int gpio_irq[UART_GPIO_MAX];
unsigned int tx_done_mask;
+ bool ms_irq_enabled;
+ bool is_usart; /* usart or uart */
+ struct timer_list uart_timer; /* uart timer */
+ int (*prepare_rx)(struct uart_port *port);
+ int (*prepare_tx)(struct uart_port *port);
+ void (*schedule_rx)(struct uart_port *port);
+ void (*schedule_tx)(struct uart_port *port);
+ void (*release_rx)(struct uart_port *port);
+ void (*release_tx)(struct uart_port *port);
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
@@ -181,31 +205,89 @@ to_atmel_uart_port(struct uart_port *uart)
}
#ifdef CONFIG_SERIAL_ATMEL_PDC
-static bool atmel_use_dma_rx(struct uart_port *port)
+static bool atmel_use_pdc_rx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- return atmel_port->use_dma_rx;
+ return atmel_port->use_pdc_rx;
}
-static bool atmel_use_dma_tx(struct uart_port *port)
+static bool atmel_use_pdc_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- return atmel_port->use_dma_tx;
+ return atmel_port->use_pdc_tx;
}
#else
-static bool atmel_use_dma_rx(struct uart_port *port)
+static bool atmel_use_pdc_rx(struct uart_port *port)
{
return false;
}
-static bool atmel_use_dma_tx(struct uart_port *port)
+static bool atmel_use_pdc_tx(struct uart_port *port)
{
return false;
}
#endif
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_tx;
+}
+
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->use_dma_rx;
+}
+
+static unsigned int atmel_get_lines_status(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ mctrl_gpio_get(atmel_port->gpios, &ret);
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_CTS))) {
+ if (ret & TIOCM_CTS)
+ status &= ~ATMEL_US_CTS;
+ else
+ status |= ATMEL_US_CTS;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DSR))) {
+ if (ret & TIOCM_DSR)
+ status &= ~ATMEL_US_DSR;
+ else
+ status |= ATMEL_US_DSR;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_RI))) {
+ if (ret & TIOCM_RI)
+ status &= ~ATMEL_US_RI;
+ else
+ status |= ATMEL_US_RI;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DCD))) {
+ if (ret & TIOCM_CD)
+ status &= ~ATMEL_US_DCD;
+ else
+ status |= ATMEL_US_DCD;
+ }
+
+ return status;
+}
+
/* Enable or disable the rs485 support */
void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
@@ -233,7 +315,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
- if (atmel_use_dma_tx(port))
+ if (atmel_use_pdc_tx(port))
atmel_port->tx_done_mask = ATMEL_US_ENDTX |
ATMEL_US_TXBUFE;
else
@@ -265,21 +347,6 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-#ifdef CONFIG_ARCH_AT91RM9200
- if (cpu_is_at91rm9200()) {
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin manually.
- */
- if (port->mapbase == AT91RM9200_BASE_US0) {
- if (mctrl & TIOCM_RTS)
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
- }
- }
-#endif
-
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
else
@@ -292,6 +359,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
UART_PUT_CR(port, control);
+ mctrl_gpio_set(atmel_port->gpios, mctrl);
+
/* Local loopback mode? */
mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
if (mctrl & TIOCM_LOOP)
@@ -319,7 +388,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
*/
static u_int atmel_get_mctrl(struct uart_port *port)
{
- unsigned int status, ret = 0;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int ret = 0, status;
status = UART_GET_CSR(port);
@@ -335,7 +405,7 @@ static u_int atmel_get_mctrl(struct uart_port *port)
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
- return ret;
+ return mctrl_gpio_get(atmel_port->gpios, &ret);
}
/*
@@ -345,7 +415,7 @@ static void atmel_stop_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_use_dma_tx(port)) {
+ if (atmel_use_pdc_tx(port)) {
/* disable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
}
@@ -364,7 +434,7 @@ static void atmel_start_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_use_dma_tx(port)) {
+ if (atmel_use_pdc_tx(port)) {
if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
/* The transmitter is already running. Yes, we
really need this.*/
@@ -390,7 +460,7 @@ static void atmel_start_rx(struct uart_port *port)
UART_PUT_CR(port, ATMEL_US_RXEN);
- if (atmel_use_dma_rx(port)) {
+ if (atmel_use_pdc_rx(port)) {
/* enable PDC controller */
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
port->read_status_mask);
@@ -407,7 +477,7 @@ static void atmel_stop_rx(struct uart_port *port)
{
UART_PUT_CR(port, ATMEL_US_RXDIS);
- if (atmel_use_dma_rx(port)) {
+ if (atmel_use_pdc_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
@@ -422,8 +492,38 @@ static void atmel_stop_rx(struct uart_port *port)
*/
static void atmel_enable_ms(struct uart_port *port)
{
- UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
- | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t ier = 0;
+
+ /*
+ * Interrupt should not be enabled twice
+ */
+ if (atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = true;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ ier |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ ier |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ ier |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ ier |= ATMEL_US_DCDIC;
+
+ UART_PUT_IER(port, ier);
}
/*
@@ -564,6 +664,369 @@ static void atmel_tx_chars(struct uart_port *port)
UART_PUT_IER(port, atmel_port->tx_done_mask);
}
+static void atmel_complete_tx_dma(void *arg)
+{
+ struct atmel_uart_port *atmel_port = arg;
+ struct uart_port *port = &atmel_port->uart;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct dma_chan *chan = atmel_port->chan_tx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (chan)
+ dmaengine_terminate_all(chan);
+ xmit->tail += sg_dma_len(&atmel_port->sg_tx);
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += sg_dma_len(&atmel_port->sg_tx);
+
+ spin_lock_irq(&atmel_port->lock_tx);
+ async_tx_ack(atmel_port->desc_tx);
+ atmel_port->cookie_tx = -EINVAL;
+ atmel_port->desc_tx = NULL;
+ spin_unlock_irq(&atmel_port->lock_tx);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /* Do we really need this? */
+ if (!uart_circ_empty(xmit))
+ tasklet_schedule(&atmel_port->tasklet);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void atmel_release_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_chan *chan = atmel_port->chan_tx;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ dma_release_channel(chan);
+ dma_unmap_sg(port->dev, &atmel_port->sg_tx, 1,
+ DMA_MEM_TO_DEV);
+ }
+
+ atmel_port->desc_tx = NULL;
+ atmel_port->chan_tx = NULL;
+ atmel_port->cookie_tx = -EINVAL;
+}
+
+/*
+ * Called from tasklet with TXRDY interrupt is disabled.
+ */
+static void atmel_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *xmit = &port->state->xmit;
+ struct dma_chan *chan = atmel_port->chan_tx;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sg = &atmel_port->sg_tx;
+
+ /* Make sure we have an idle channel */
+ if (atmel_port->desc_tx != NULL)
+ return;
+
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped,
+ * and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer,
+ * we have to transmit till the end, and then the rest.
+ * Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+ sg_dma_address(sg) = (sg_dma_address(sg) &
+ ~(UART_XMIT_SIZE - 1))
+ + sg->offset;
+ sg_dma_len(sg) = CIRC_CNT_TO_END(xmit->head,
+ xmit->tail,
+ UART_XMIT_SIZE);
+ BUG_ON(!sg_dma_len(sg));
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg,
+ 1,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ if (!desc) {
+ dev_err(port->dev, "Failed to send via dma!\n");
+ return;
+ }
+
+ dma_sync_sg_for_device(port->dev, sg, 1, DMA_MEM_TO_DEV);
+
+ atmel_port->desc_tx = desc;
+ desc->callback = atmel_complete_tx_dma;
+ desc->callback_param = atmel_port;
+ atmel_port->cookie_tx = dmaengine_submit(desc);
+
+ } else {
+ if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+ /* DMA done, stop TX, start RX for RS485 */
+ atmel_start_rx(port);
+ }
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static int atmel_prepare_tx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ dma_cap_mask_t mask;
+ struct dma_slave_config config;
+ int ret, nent;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
+ if (atmel_port->chan_tx == NULL)
+ goto chan_err;
+ dev_info(port->dev, "using %s for tx DMA transfers\n",
+ dma_chan_name(atmel_port->chan_tx));
+
+ spin_lock_init(&atmel_port->lock_tx);
+ sg_init_table(&atmel_port->sg_tx, 1);
+ /* UART circular tx buffer is an aligned page. */
+ BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ sg_set_page(&atmel_port->sg_tx,
+ virt_to_page(port->state->xmit.buf),
+ UART_XMIT_SIZE,
+ (int)port->state->xmit.buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_tx,
+ 1,
+ DMA_MEM_TO_DEV);
+
+ if (!nent) {
+ dev_dbg(port->dev, "need to release resource of dma\n");
+ goto chan_err;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ sg_dma_len(&atmel_port->sg_tx),
+ port->state->xmit.buf,
+ sg_dma_address(&atmel_port->sg_tx));
+ }
+
+ /* Configure the slave DMA */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_MEM_TO_DEV;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ config.dst_addr = port->mapbase + ATMEL_US_THR;
+
+ ret = dmaengine_device_control(atmel_port->chan_tx,
+ DMA_SLAVE_CONFIG,
+ (unsigned long)&config);
+ if (ret) {
+ dev_err(port->dev, "DMA tx slave configuration failed\n");
+ goto chan_err;
+ }
+
+ return 0;
+
+chan_err:
+ dev_err(port->dev, "TX channel not available, switch to pio\n");
+ atmel_port->use_dma_tx = 0;
+ if (atmel_port->chan_tx)
+ atmel_release_tx_dma(port);
+ return -EINVAL;
+}
+
+static void atmel_flip_buffer_rx_dma(struct uart_port *port,
+ char *buf, size_t count)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_port *tport = &port->state->port;
+
+ dma_sync_sg_for_cpu(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_DEV_TO_MEM);
+
+ tty_insert_flip_string(tport, buf, count);
+
+ dma_sync_sg_for_device(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_DEV_TO_MEM);
+ /*
+ * Drop the lock here since it might end up calling
+ * uart_start(), which takes the lock.
+ */
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+}
+
+static void atmel_complete_rx_dma(void *arg)
+{
+ struct uart_port *port = arg;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ tasklet_schedule(&atmel_port->tasklet);
+}
+
+static void atmel_release_rx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_chan *chan = atmel_port->chan_rx;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ dma_release_channel(chan);
+ dma_unmap_sg(port->dev, &atmel_port->sg_rx, 1,
+ DMA_DEV_TO_MEM);
+ }
+
+ atmel_port->desc_rx = NULL;
+ atmel_port->chan_rx = NULL;
+ atmel_port->cookie_rx = -EINVAL;
+}
+
+static void atmel_rx_from_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct circ_buf *ring = &atmel_port->rx_ring;
+ struct dma_chan *chan = atmel_port->chan_rx;
+ struct dma_tx_state state;
+ enum dma_status dmastat;
+ size_t pending, count;
+
+
+ /* Reset the UART timeout early so that we don't miss one */
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+ dmastat = dmaengine_tx_status(chan,
+ atmel_port->cookie_rx,
+ &state);
+ /* Restart a new tasklet if DMA status is error */
+ if (dmastat == DMA_ERROR) {
+ dev_dbg(port->dev, "Get residue error, restart tasklet\n");
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ tasklet_schedule(&atmel_port->tasklet);
+ return;
+ }
+ /* current transfer size should no larger than dma buffer */
+ pending = sg_dma_len(&atmel_port->sg_rx) - state.residue;
+ BUG_ON(pending > sg_dma_len(&atmel_port->sg_rx));
+
+ /*
+ * This will take the chars we have so far,
+ * ring->head will record the transfer size, only new bytes come
+ * will insert into the framework.
+ */
+ if (pending > ring->head) {
+ count = pending - ring->head;
+
+ atmel_flip_buffer_rx_dma(port, ring->buf + ring->head, count);
+
+ ring->head += count;
+ if (ring->head == sg_dma_len(&atmel_port->sg_rx))
+ ring->head = 0;
+
+ port->icount.rx += count;
+ }
+
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+}
+
+static int atmel_prepare_rx_dma(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct dma_async_tx_descriptor *desc;
+ dma_cap_mask_t mask;
+ struct dma_slave_config config;
+ struct circ_buf *ring;
+ int ret, nent;
+
+ ring = &atmel_port->rx_ring;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_CYCLIC, mask);
+
+ atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
+ if (atmel_port->chan_rx == NULL)
+ goto chan_err;
+ dev_info(port->dev, "using %s for rx DMA transfers\n",
+ dma_chan_name(atmel_port->chan_rx));
+
+ spin_lock_init(&atmel_port->lock_rx);
+ sg_init_table(&atmel_port->sg_rx, 1);
+ /* UART circular rx buffer is an aligned page. */
+ BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ sg_set_page(&atmel_port->sg_rx,
+ virt_to_page(ring->buf),
+ ATMEL_SERIAL_RINGSIZE,
+ (int)ring->buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_DEV_TO_MEM);
+
+ if (!nent) {
+ dev_dbg(port->dev, "need to release resource of dma\n");
+ goto chan_err;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ sg_dma_len(&atmel_port->sg_rx),
+ ring->buf,
+ sg_dma_address(&atmel_port->sg_rx));
+ }
+
+ /* Configure the slave DMA */
+ memset(&config, 0, sizeof(config));
+ config.direction = DMA_DEV_TO_MEM;
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ config.src_addr = port->mapbase + ATMEL_US_RHR;
+
+ ret = dmaengine_device_control(atmel_port->chan_rx,
+ DMA_SLAVE_CONFIG,
+ (unsigned long)&config);
+ if (ret) {
+ dev_err(port->dev, "DMA rx slave configuration failed\n");
+ goto chan_err;
+ }
+ /*
+ * Prepare a cyclic dma transfer, assign 2 descriptors,
+ * each one is half ring buffer size
+ */
+ desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
+ sg_dma_address(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx)/2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ desc->callback = atmel_complete_rx_dma;
+ desc->callback_param = port;
+ atmel_port->desc_rx = desc;
+ atmel_port->cookie_rx = dmaengine_submit(desc);
+
+ return 0;
+
+chan_err:
+ dev_err(port->dev, "RX channel not available, switch to pio\n");
+ atmel_port->use_dma_rx = 0;
+ if (atmel_port->chan_rx)
+ atmel_release_rx_dma(port);
+ return -EINVAL;
+}
+
+static void atmel_uart_timer_callback(unsigned long data)
+{
+ struct uart_port *port = (void *)data;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ tasklet_schedule(&atmel_port->tasklet);
+ mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port));
+}
+
/*
* receive interrupt handler.
*/
@@ -572,7 +1035,7 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_use_dma_rx(port)) {
+ if (atmel_use_pdc_rx(port)) {
/*
* PDC receive. Just schedule the tasklet and let it
* figure out the details.
@@ -591,6 +1054,13 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
atmel_pdc_rxerr(port, pending);
}
+ if (atmel_use_dma_rx(port)) {
+ if (pending & ATMEL_US_TIMEOUT) {
+ UART_PUT_IDR(port, ATMEL_US_TIMEOUT);
+ tasklet_schedule(&atmel_port->tasklet);
+ }
+ }
+
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
@@ -642,11 +1112,31 @@ atmel_handle_status(struct uart_port *port, unsigned int pending,
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, pending, pass_counter = 0;
+ bool gpio_handled = false;
do {
- status = UART_GET_CSR(port);
+ status = atmel_get_lines_status(port);
pending = status & UART_GET_IMR(port);
+ if (!gpio_handled) {
+ /*
+ * Dealing with GPIO interrupt
+ */
+ if (irq == atmel_port->gpio_irq[UART_GPIO_CTS])
+ pending |= ATMEL_US_CTSIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DSR])
+ pending |= ATMEL_US_DSRIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_RI])
+ pending |= ATMEL_US_RIIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DCD])
+ pending |= ATMEL_US_DCDIC;
+
+ gpio_handled = true;
+ }
if (!pending)
break;
@@ -658,10 +1148,21 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
return pass_counter ? IRQ_HANDLED : IRQ_NONE;
}
+static void atmel_release_tx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_TO_DEVICE);
+}
+
/*
* Called from tasklet with ENDTX and TXBUFE interrupts disabled.
*/
-static void atmel_tx_dma(struct uart_port *port)
+static void atmel_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *xmit = &port->state->xmit;
@@ -710,6 +1211,23 @@ static void atmel_tx_dma(struct uart_port *port)
uart_write_wakeup(port);
}
+static int atmel_prepare_tx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ pdc->buf = xmit->buf;
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ pdc->dma_size = UART_XMIT_SIZE;
+ pdc->ofs = 0;
+
+ return 0;
+}
+
static void atmel_rx_from_ring(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -774,14 +1292,30 @@ static void atmel_rx_from_ring(struct uart_port *port)
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->state->port.tty);
+ tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
}
-static void atmel_rx_from_dma(struct uart_port *port)
+static void atmel_release_rx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->state->port.tty;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ dma_unmap_single(port->dev,
+ pdc->dma_addr,
+ pdc->dma_size,
+ DMA_FROM_DEVICE);
+ kfree(pdc->buf);
+ }
+}
+
+static void atmel_rx_from_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_port *tport = &port->state->port;
struct atmel_dma_buffer *pdc;
int rx_idx = atmel_port->pdc_rx_idx;
unsigned int head;
@@ -820,7 +1354,8 @@ static void atmel_rx_from_dma(struct uart_port *port)
*/
count = head - tail;
- tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
+ tty_insert_flip_string(tport, pdc->buf + pdc->ofs,
+ count);
dma_sync_single_for_device(port->dev, pdc->dma_addr,
pdc->dma_size, DMA_FROM_DEVICE);
@@ -848,12 +1383,51 @@ static void atmel_rx_from_dma(struct uart_port *port)
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tport);
spin_lock(&port->lock);
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
}
+static int atmel_prepare_rx_pdc(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
+ if (pdc->buf == NULL) {
+ if (i != 0) {
+ dma_unmap_single(port->dev,
+ atmel_port->pdc_rx[0].dma_addr,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ kfree(atmel_port->pdc_rx[0].buf);
+ }
+ atmel_port->use_pdc_rx = 0;
+ return -ENOMEM;
+ }
+ pdc->dma_addr = dma_map_single(port->dev,
+ pdc->buf,
+ PDC_BUFFER_SIZE,
+ DMA_FROM_DEVICE);
+ pdc->dma_size = PDC_BUFFER_SIZE;
+ pdc->ofs = 0;
+ }
+
+ atmel_port->pdc_rx_idx = 0;
+
+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+
+ return 0;
+}
+
/*
* tasklet handling tty stuff outside the interrupt handler.
*/
@@ -867,10 +1441,7 @@ static void atmel_tasklet_func(unsigned long data)
/* The interrupt handler does not take the lock */
spin_lock(&port->lock);
- if (atmel_use_dma_tx(port))
- atmel_tx_dma(port);
- else
- atmel_tx_chars(port);
+ atmel_port->schedule_tx(port);
status = atmel_port->irq_status;
status_change = status ^ atmel_port->irq_status_prev;
@@ -892,19 +1463,204 @@ static void atmel_tasklet_func(unsigned long data)
atmel_port->irq_status_prev = status;
}
- if (atmel_use_dma_rx(port))
- atmel_rx_from_dma(port);
- else
- atmel_rx_from_ring(port);
+ atmel_port->schedule_rx(port);
spin_unlock(&port->lock);
}
+static int atmel_init_property(struct atmel_uart_port *atmel_port,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+
+ if (np) {
+ /* DMA/PDC usage specification */
+ if (of_get_property(np, "atmel,use-dma-rx", NULL)) {
+ if (of_get_property(np, "dmas", NULL)) {
+ atmel_port->use_dma_rx = true;
+ atmel_port->use_pdc_rx = false;
+ } else {
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_pdc_rx = true;
+ }
+ } else {
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_pdc_rx = false;
+ }
+
+ if (of_get_property(np, "atmel,use-dma-tx", NULL)) {
+ if (of_get_property(np, "dmas", NULL)) {
+ atmel_port->use_dma_tx = true;
+ atmel_port->use_pdc_tx = false;
+ } else {
+ atmel_port->use_dma_tx = false;
+ atmel_port->use_pdc_tx = true;
+ }
+ } else {
+ atmel_port->use_dma_tx = false;
+ atmel_port->use_pdc_tx = false;
+ }
+
+ } else {
+ atmel_port->use_pdc_rx = pdata->use_dma_rx;
+ atmel_port->use_pdc_tx = pdata->use_dma_tx;
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_dma_tx = false;
+ }
+
+ return 0;
+}
+
+static void atmel_init_rs485(struct atmel_uart_port *atmel_port,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
+
+ if (np) {
+ u32 rs485_delay[2];
+ /* rs485 properties */
+ if (of_property_read_u32_array(np, "rs485-rts-delay",
+ rs485_delay, 2) == 0) {
+ struct serial_rs485 *rs485conf = &atmel_port->rs485;
+
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+ rs485conf->flags = 0;
+
+ if (of_get_property(np, "rs485-rx-during-tx", NULL))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
+ NULL))
+ rs485conf->flags |= SER_RS485_ENABLED;
+ }
+ } else {
+ atmel_port->rs485 = pdata->rs485;
+ }
+
+}
+
+static void atmel_set_ops(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_use_dma_rx(port)) {
+ atmel_port->prepare_rx = &atmel_prepare_rx_dma;
+ atmel_port->schedule_rx = &atmel_rx_from_dma;
+ atmel_port->release_rx = &atmel_release_rx_dma;
+ } else if (atmel_use_pdc_rx(port)) {
+ atmel_port->prepare_rx = &atmel_prepare_rx_pdc;
+ atmel_port->schedule_rx = &atmel_rx_from_pdc;
+ atmel_port->release_rx = &atmel_release_rx_pdc;
+ } else {
+ atmel_port->prepare_rx = NULL;
+ atmel_port->schedule_rx = &atmel_rx_from_ring;
+ atmel_port->release_rx = NULL;
+ }
+
+ if (atmel_use_dma_tx(port)) {
+ atmel_port->prepare_tx = &atmel_prepare_tx_dma;
+ atmel_port->schedule_tx = &atmel_tx_dma;
+ atmel_port->release_tx = &atmel_release_tx_dma;
+ } else if (atmel_use_pdc_tx(port)) {
+ atmel_port->prepare_tx = &atmel_prepare_tx_pdc;
+ atmel_port->schedule_tx = &atmel_tx_pdc;
+ atmel_port->release_tx = &atmel_release_tx_pdc;
+ } else {
+ atmel_port->prepare_tx = NULL;
+ atmel_port->schedule_tx = &atmel_tx_chars;
+ atmel_port->release_tx = NULL;
+ }
+}
+
+/*
+ * Get ip name usart or uart
+ */
+static void atmel_get_ip_name(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int name = UART_GET_IP_NAME(port);
+ u32 version;
+ int usart, uart;
+ /* usart and uart ascii */
+ usart = 0x55534152;
+ uart = 0x44424755;
+
+ atmel_port->is_usart = false;
+
+ if (name == usart) {
+ dev_dbg(port->dev, "This is usart\n");
+ atmel_port->is_usart = true;
+ } else if (name == uart) {
+ dev_dbg(port->dev, "This is uart\n");
+ atmel_port->is_usart = false;
+ } else {
+ /* fallback for older SoCs: use version field */
+ version = UART_GET_IP_VERSION(port);
+ switch (version) {
+ case 0x302:
+ case 0x10213:
+ dev_dbg(port->dev, "This version is usart\n");
+ atmel_port->is_usart = true;
+ break;
+ case 0x203:
+ case 0x10202:
+ dev_dbg(port->dev, "This version is uart\n");
+ atmel_port->is_usart = false;
+ break;
+ default:
+ dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
+ }
+ }
+}
+
+static void atmel_free_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ enum mctrl_gpio_idx i;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (atmel_port->gpio_irq[i] >= 0)
+ free_irq(atmel_port->gpio_irq[i], port);
+}
+
+static int atmel_request_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int *irq = atmel_port->gpio_irq;
+ enum mctrl_gpio_idx i;
+ int err = 0;
+
+ for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
+ if (irq[i] < 0)
+ continue;
+
+ irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
+ err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH,
+ "atmel_serial", port);
+ if (err)
+ dev_err(port->dev, "atmel_startup - Can't get %d irq\n",
+ irq[i]);
+ }
+
+ /*
+ * If something went wrong, rollback.
+ */
+ while (err && (--i >= 0))
+ if (irq[i] >= 0)
+ free_irq(irq[i], port);
+
+ return err;
+}
+
/*
* Perform initialization and enable port for reception
*/
static int atmel_startup(struct uart_port *port)
{
+ struct platform_device *pdev = to_platform_device(port->dev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct tty_struct *tty = port->state->port.tty;
int retval;
@@ -915,6 +1671,7 @@ static int atmel_startup(struct uart_port *port)
* handle an unexpected interrupt
*/
UART_PUT_IDR(port, -1);
+ atmel_port->ms_irq_enabled = false;
/*
* Allocate the IRQ
@@ -922,74 +1679,36 @@ static int atmel_startup(struct uart_port *port)
retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
tty ? tty->name : "atmel_serial", port);
if (retval) {
- printk("atmel_serial: atmel_startup - Can't get irq\n");
+ dev_err(port->dev, "atmel_startup - Can't get irq\n");
return retval;
}
/*
- * Initialize DMA (if necessary)
+ * Get the GPIO lines IRQ
*/
- if (atmel_use_dma_rx(port)) {
- int i;
-
- for (i = 0; i < 2; i++) {
- struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-
- pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
- if (pdc->buf == NULL) {
- if (i != 0) {
- dma_unmap_single(port->dev,
- atmel_port->pdc_rx[0].dma_addr,
- PDC_BUFFER_SIZE,
- DMA_FROM_DEVICE);
- kfree(atmel_port->pdc_rx[0].buf);
- }
- free_irq(port->irq, port);
- return -ENOMEM;
- }
- pdc->dma_addr = dma_map_single(port->dev,
- pdc->buf,
- PDC_BUFFER_SIZE,
- DMA_FROM_DEVICE);
- pdc->dma_size = PDC_BUFFER_SIZE;
- pdc->ofs = 0;
- }
+ retval = atmel_request_gpio_irq(port);
+ if (retval)
+ goto free_irq;
- atmel_port->pdc_rx_idx = 0;
-
- UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
- UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-
- UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
- UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
- }
- if (atmel_use_dma_tx(port)) {
- struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
- struct circ_buf *xmit = &port->state->xmit;
+ /*
+ * Initialize DMA (if necessary)
+ */
+ atmel_init_property(atmel_port, pdev);
- pdc->buf = xmit->buf;
- pdc->dma_addr = dma_map_single(port->dev,
- pdc->buf,
- UART_XMIT_SIZE,
- DMA_TO_DEVICE);
- pdc->dma_size = UART_XMIT_SIZE;
- pdc->ofs = 0;
+ if (atmel_port->prepare_rx) {
+ retval = atmel_port->prepare_rx(port);
+ if (retval < 0)
+ atmel_set_ops(port);
}
- /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
- if (atmel_open_hook) {
- retval = atmel_open_hook(port);
- if (retval) {
- free_irq(port->irq, port);
- return retval;
- }
+ if (atmel_port->prepare_tx) {
+ retval = atmel_port->prepare_tx(port);
+ if (retval < 0)
+ atmel_set_ops(port);
}
/* Save current CSR for comparison in atmel_tasklet_func() */
- atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status_prev = atmel_get_lines_status(port);
atmel_port->irq_status = atmel_port->irq_status_prev;
/*
@@ -999,20 +1718,47 @@ static int atmel_startup(struct uart_port *port)
/* enable xmit & rcvr */
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
- if (atmel_use_dma_rx(port)) {
- /* set UART timeout */
- UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
- UART_PUT_CR(port, ATMEL_US_STTTO);
+ setup_timer(&atmel_port->uart_timer,
+ atmel_uart_timer_callback,
+ (unsigned long)port);
- UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ if (atmel_use_pdc_rx(port)) {
+ /* set UART timeout */
+ if (!atmel_port->is_usart) {
+ mod_timer(&atmel_port->uart_timer,
+ jiffies + uart_poll_timeout(port));
+ /* set USART timeout */
+ } else {
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ }
/* enable PDC controller */
UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ } else if (atmel_use_dma_rx(port)) {
+ /* set UART timeout */
+ if (!atmel_port->is_usart) {
+ mod_timer(&atmel_port->uart_timer,
+ jiffies + uart_poll_timeout(port));
+ /* set USART timeout */
+ } else {
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+ UART_PUT_CR(port, ATMEL_US_STTTO);
+
+ UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ }
} else {
/* enable receive only */
UART_PUT_IER(port, ATMEL_US_RXRDY);
}
return 0;
+
+free_irq:
+ free_irq(port->irq, port);
+
+ return retval;
}
/*
@@ -1021,54 +1767,51 @@ static int atmel_startup(struct uart_port *port)
static void atmel_shutdown(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
/*
- * Ensure everything is stopped.
+ * Prevent any tasklets being scheduled during
+ * cleanup
*/
- atmel_stop_rx(port);
- atmel_stop_tx(port);
+ del_timer_sync(&atmel_port->uart_timer);
/*
- * Shut-down the DMA.
+ * Clear out any scheduled tasklets before
+ * we destroy the buffers
*/
- if (atmel_use_dma_rx(port)) {
- int i;
+ tasklet_kill(&atmel_port->tasklet);
- for (i = 0; i < 2; i++) {
- struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+ /*
+ * Ensure everything is stopped and
+ * disable all interrupts, port and break condition.
+ */
+ atmel_stop_rx(port);
+ atmel_stop_tx(port);
- dma_unmap_single(port->dev,
- pdc->dma_addr,
- pdc->dma_size,
- DMA_FROM_DEVICE);
- kfree(pdc->buf);
- }
- }
- if (atmel_use_dma_tx(port)) {
- struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, -1);
- dma_unmap_single(port->dev,
- pdc->dma_addr,
- pdc->dma_size,
- DMA_TO_DEVICE);
- }
/*
- * Disable all interrupts, port and break condition.
+ * Shut-down the DMA.
*/
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
- UART_PUT_IDR(port, -1);
+ if (atmel_port->release_rx)
+ atmel_port->release_rx(port);
+ if (atmel_port->release_tx)
+ atmel_port->release_tx(port);
/*
- * Free the interrupt
+ * Reset ring buffer pointers
*/
- free_irq(port->irq, port);
+ atmel_port->rx_ring.head = 0;
+ atmel_port->rx_ring.tail = 0;
/*
- * If there is a specific "close" function (to unregister
- * control line interrupts)
+ * Free the interrupts
*/
- if (atmel_close_hook)
- atmel_close_hook(port);
+ free_irq(port->irq, port);
+ atmel_free_gpio_irq(port);
+
+ atmel_port->ms_irq_enabled = false;
}
/*
@@ -1079,7 +1822,7 @@ static void atmel_flush_buffer(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_use_dma_tx(port)) {
+ if (atmel_use_pdc_tx(port)) {
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
@@ -1099,7 +1842,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
* Enable the peripheral clock for this serial port.
* This is called on uart_open() or a resume event.
*/
- clk_enable(atmel_port->clk);
+ clk_prepare_enable(atmel_port->clk);
/* re-enable interrupts if we disabled some on suspend */
UART_PUT_IER(port, atmel_port->backup_imr);
@@ -1113,10 +1856,10 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
* Disable the peripheral clock for this serial port.
* This is called on uart_close() or a suspend event.
*/
- clk_disable(atmel_port->clk);
+ clk_disable_unprepare(atmel_port->clk);
break;
default:
- printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+ dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
}
}
@@ -1189,10 +1932,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
port->read_status_mask = ATMEL_US_OVRE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
- if (atmel_use_dma_rx(port))
+ if (atmel_use_pdc_rx(port))
/* need to enable error interrupts */
UART_PUT_IER(port, port->read_status_mask);
@@ -1231,13 +1974,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode &= ~ATMEL_US_USMODE;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
- dev_dbg(port->dev, "Setting UART to RS485\n");
if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
- } else {
- dev_dbg(port->dev, "Setting UART to RS232\n");
}
/* set the parity, stop bits and data size */
@@ -1422,54 +2162,20 @@ static struct uart_ops atmel_pops = {
#endif
};
-static void atmel_of_init_port(struct atmel_uart_port *atmel_port,
- struct device_node *np)
-{
- u32 rs485_delay[2];
-
- /* DMA/PDC usage specification */
- if (of_get_property(np, "atmel,use-dma-rx", NULL))
- atmel_port->use_dma_rx = 1;
- else
- atmel_port->use_dma_rx = 0;
- if (of_get_property(np, "atmel,use-dma-tx", NULL))
- atmel_port->use_dma_tx = 1;
- else
- atmel_port->use_dma_tx = 0;
-
- /* rs485 properties */
- if (of_property_read_u32_array(np, "rs485-rts-delay",
- rs485_delay, 2) == 0) {
- struct serial_rs485 *rs485conf = &atmel_port->rs485;
-
- rs485conf->delay_rts_before_send = rs485_delay[0];
- rs485conf->delay_rts_after_send = rs485_delay[1];
- rs485conf->flags = 0;
-
- if (of_get_property(np, "rs485-rx-during-tx", NULL))
- rs485conf->flags |= SER_RS485_RX_DURING_TX;
-
- if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
- rs485conf->flags |= SER_RS485_ENABLED;
- }
-}
-
/*
* Configure the port from the platform device resource info.
*/
-static void atmel_init_port(struct atmel_uart_port *atmel_port,
+static int atmel_init_port(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
+ int ret;
struct uart_port *port = &atmel_port->uart;
- struct atmel_uart_data *pdata = pdev->dev.platform_data;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
- if (pdev->dev.of_node) {
- atmel_of_init_port(atmel_port, pdev->dev.of_node);
- } else {
- atmel_port->use_dma_rx = pdata->use_dma_rx;
- atmel_port->use_dma_tx = pdata->use_dma_tx;
- atmel_port->rs485 = pdata->rs485;
- }
+ if (!atmel_init_property(atmel_port, pdev))
+ atmel_set_ops(port);
+
+ atmel_init_rs485(atmel_port, pdev);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
@@ -1495,21 +2201,33 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port,
/* for console, the clock could already be configured */
if (!atmel_port->clk) {
atmel_port->clk = clk_get(&pdev->dev, "usart");
- clk_enable(atmel_port->clk);
+ if (IS_ERR(atmel_port->clk)) {
+ ret = PTR_ERR(atmel_port->clk);
+ atmel_port->clk = NULL;
+ return ret;
+ }
+ ret = clk_prepare_enable(atmel_port->clk);
+ if (ret) {
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
+ return ret;
+ }
port->uartclk = clk_get_rate(atmel_port->clk);
- clk_disable(atmel_port->clk);
+ clk_disable_unprepare(atmel_port->clk);
/* only enable clock when USART is in use */
}
/* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
if (atmel_port->rs485.flags & SER_RS485_ENABLED)
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- else if (atmel_use_dma_tx(port)) {
+ else if (atmel_use_pdc_tx(port)) {
port->fifosize = PDC_BUFFER_SIZE;
atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
} else {
atmel_port->tx_done_mask = ATMEL_US_TXRDY;
}
+
+ return 0;
}
struct platform_device *atmel_default_console_device; /* the serial console device */
@@ -1600,6 +2318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
static int __init atmel_console_setup(struct console *co, char *options)
{
+ int ret;
struct uart_port *port = &atmel_ports[co->index].uart;
int baud = 115200;
int bits = 8;
@@ -1611,7 +2330,9 @@ static int __init atmel_console_setup(struct console *co, char *options)
return -ENODEV;
}
- clk_enable(atmel_ports[co->index].clk);
+ ret = clk_prepare_enable(atmel_ports[co->index].clk);
+ if (ret)
+ return ret;
UART_PUT_IDR(port, -1);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
@@ -1644,9 +2365,10 @@ static struct console atmel_console = {
*/
static int __init atmel_console_init(void)
{
+ int ret;
if (atmel_default_console_device) {
struct atmel_uart_data *pdata =
- atmel_default_console_device->dev.platform_data;
+ dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
struct atmel_uart_port *port = &atmel_ports[id];
@@ -1654,7 +2376,9 @@ static int __init atmel_console_init(void)
port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
- atmel_init_port(port, atmel_default_console_device);
+ ret = atmel_init_port(port, atmel_default_console_device);
+ if (ret)
+ return ret;
register_console(&atmel_console);
}
@@ -1748,14 +2472,33 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
+static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
+{
+ enum mctrl_gpio_idx i;
+ struct gpio_desc *gpiod;
+
+ p->gpios = mctrl_gpio_init(dev, 0);
+ if (IS_ERR_OR_NULL(p->gpios))
+ return -1;
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ gpiod = mctrl_gpio_to_gpiod(p->gpios, i);
+ if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+ p->gpio_irq[i] = gpiod_to_irq(gpiod);
+ else
+ p->gpio_irq[i] = -EINVAL;
+ }
+
+ return 0;
+}
+
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
struct device_node *np = pdev->dev.of_node;
- struct atmel_uart_data *pdata = pdev->dev.platform_data;
+ struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
int ret = -ENODEV;
- struct pinctrl *pinctrl;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
@@ -1768,15 +2511,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
@@ -1786,15 +2528,16 @@ static int atmel_serial_probe(struct platform_device *pdev)
port->backup_imr = 0;
port->uart.line = ret;
- atmel_init_port(port, pdev);
+ ret = atmel_init_gpios(port, &pdev->dev);
+ if (ret < 0)
+ dev_err(&pdev->dev, "%s",
+ "Failed to initialize GPIOs. The serial port may not work as expected");
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ ret = atmel_init_port(port, pdev);
+ if (ret)
goto err;
- }
- if (!atmel_use_dma_rx(&port->uart)) {
+ if (!atmel_use_pdc_rx(&port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
@@ -1812,9 +2555,9 @@ static int atmel_serial_probe(struct platform_device *pdev)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
- * the clk_enable() in atmel_console_setup()
+ * the clk_prepare_enable() in atmel_console_setup()
*/
- clk_disable(port->clk);
+ clk_disable_unprepare(port->clk);
}
#endif
@@ -1826,6 +2569,11 @@ static int atmel_serial_probe(struct platform_device *pdev)
UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
}
+ /*
+ * Get port name of usart or uart
+ */
+ atmel_get_ip_name(&port->uart);
+
return 0;
err_add_port:
@@ -1846,17 +2594,17 @@ static int atmel_serial_remove(struct platform_device *pdev)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int ret = 0;
+ tasklet_kill(&atmel_port->tasklet);
+
device_init_wakeup(&pdev->dev, 0);
- platform_set_drvdata(pdev, NULL);
ret = uart_remove_one_port(&atmel_uart, port);
- tasklet_kill(&atmel_port->tasklet);
kfree(atmel_port->rx_ring.buf);
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 12:05:22 +0000