diff options
Diffstat (limited to 'drivers/staging/rtl8821ae/debug.h')
| -rw-r--r-- | drivers/staging/rtl8821ae/debug.h | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/staging/rtl8821ae/debug.h b/drivers/staging/rtl8821ae/debug.h new file mode 100644 index 00000000000..6c0a553e98b --- /dev/null +++ b/drivers/staging/rtl8821ae/debug.h @@ -0,0 +1,227 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#ifndef __RTL_DEBUG_H__ +#define __RTL_DEBUG_H__ + +/*-------------------------------------------------------------- + Debug level +--------------------------------------------------------------*/ +/* + *Fatal bug. + *For example, Tx/Rx/IO locked up, + *memory access violation, + *resource allocation failed, + *unexpected HW behavior, HW BUG + *and so on. + */ +#define DBG_EMERG 0 + +/* + *Abnormal, rare, or unexpected cases. + *For example, Packet/IO Ctl canceled, + *device suprisely unremoved and so on. + */ +#define DBG_WARNING 2 + +/* + *Normal case driver developer should + *open, we can see link status like + *assoc/AddBA/DHCP/adapter start and + *so on basic and useful informations. + */ +#define DBG_DMESG 3 + +/* + *Normal case with useful information + *about current SW or HW state. + *For example, Tx/Rx descriptor to fill, + *Tx/Rx descriptor completed status, + *SW protocol state change, dynamic + *mechanism state change and so on. + */ +#define DBG_LOUD 4 + +/* + *Normal case with detail execution + *flow or information. + */ +#define DBG_TRACE 5 + +/*-------------------------------------------------------------- + Define the rt_trace components +--------------------------------------------------------------*/ +#define COMP_ERR BIT(0) +#define COMP_FW BIT(1) +#define COMP_INIT BIT(2) /*For init/deinit */ +#define COMP_RECV BIT(3) /*For Rx. */ +#define COMP_SEND BIT(4) /*For Tx. */ +#define COMP_MLME BIT(5) /*For MLME. */ +#define COMP_SCAN BIT(6) /*For Scan. */ +#define COMP_INTR BIT(7) /*For interrupt Related. */ +#define COMP_LED BIT(8) /*For LED. */ +#define COMP_SEC BIT(9) /*For sec. */ +#define COMP_BEACON BIT(10) /*For beacon. */ +#define COMP_RATE BIT(11) /*For rate. */ +#define COMP_RXDESC BIT(12) /*For rx desc. */ +#define COMP_DIG BIT(13) /*For DIG */ +#define COMP_TXAGC BIT(14) /*For Tx power */ +#define COMP_HIPWR BIT(15) /*For High Power Mechanism */ +#define COMP_POWER BIT(16) /*For lps/ips/aspm. */ +#define COMP_POWER_TRACKING BIT(17) /*For TX POWER TRACKING */ +#define COMP_BB_POWERSAVING BIT(18) +#define COMP_SWAS BIT(19) /*For SW Antenna Switch */ +#define COMP_RF BIT(20) /*For RF. */ +#define COMP_TURBO BIT(21) /*For EDCA TURBO. */ +#define COMP_RATR BIT(22) +#define COMP_CMD BIT(23) +#define COMP_EFUSE BIT(24) +#define COMP_QOS BIT(25) +#define COMP_MAC80211 BIT(26) +#define COMP_REGD BIT(27) +#define COMP_CHAN BIT(28) +#define COMP_EASY_CONCURRENT BIT(29) +#define COMP_BT_COEXIST BIT(30) +#define COMP_IQK BIT(31) + +/*-------------------------------------------------------------- + Define the rt_print components +--------------------------------------------------------------*/ +/* Define EEPROM and EFUSE check module bit*/ +#define EEPROM_W BIT(0) +#define EFUSE_PG BIT(1) +#define EFUSE_READ_ALL BIT(2) + +/* Define init check for module bit*/ +#define INIT_EEPROM BIT(0) +#define INIT_TxPower BIT(1) +#define INIT_IQK BIT(2) +#define INIT_RF BIT(3) + +/* Define PHY-BB/RF/MAC check module bit */ +#define PHY_BBR BIT(0) +#define PHY_BBW BIT(1) +#define PHY_RFR BIT(2) +#define PHY_RFW BIT(3) +#define PHY_MACR BIT(4) +#define PHY_MACW BIT(5) +#define PHY_ALLR BIT(6) +#define PHY_ALLW BIT(7) +#define PHY_TXPWR BIT(8) +#define PHY_PWRDIFF BIT(9) + +/* Define Dynamic Mechanism check module bit --> FDM */ +#define WA_IOT BIT(0) +#define DM_PWDB BIT(1) +#define DM_MONITOR BIT(2) +#define DM_DIG BIT(3) +#define DM_EDCA_TURBO BIT(4) + +enum dbgp_flag_e { + FQOS = 0, + FTX = 1, + FRX = 2, + FSEC = 3, + FMGNT = 4, + FMLME = 5, + FRESOURCE = 6, + FBEACON = 7, + FISR = 8, + FPHY = 9, + FMP = 10, + FEEPROM = 11, + FPWR = 12, + FDM = 13, + FDBGCtrl = 14, + FC2H = 15, + FBT = 16, + FINIT = 17, + FIOCTL = 18, + DBGP_TYPE_MAX +}; + +#define RT_ASSERT(_exp,fmt) \ + do { \ + if(!(_exp)) { \ + printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \ + __func__); \ + printk fmt; \ + } \ + } while(0); + +#define RT_DISP(dbgtype, dbgflag, printstr) + +#define RT_TRACE(comp, level, fmt)\ + do { \ + if(unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \ + ((level) <= rtlpriv->dbg.global_debuglevel))) {\ + printk(KERN_DEBUG "%s-%d:%s():<%lx-%x> ", \ + KBUILD_MODNAME, \ + rtlpriv->rtlhal.interfaceindex, __func__, \ + in_interrupt(), in_atomic()); \ + printk fmt; \ + }\ + } while(0); + +#define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr) \ + do { \ + if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \ + printk(KERN_DEBUG "%s: ", KBUILD_MODNAME); \ + printk printstr; \ + } \ + } while(0); + +#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \ + _hexdatalen) \ + do {\ + if(unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents ) &&\ + (_level <= rtlpriv->dbg.global_debuglevel ))) { \ + int __i; \ + u8* ptr = (u8*)_hexdata; \ + printk(KERN_DEBUG "%s: ", KBUILD_MODNAME); \ + printk(KERN_DEBUG "In process \"%s\" (pid %i):", \ + current->comm, \ + current->pid); \ + printk(_titlestring); \ + for( __i=0; __i<(int)_hexdatalen; __i++ ) { \ + printk("%02X%s", ptr[__i], (((__i + 1) % 4) \ + == 0)?" ":" ");\ + if (((__i + 1) % 16) == 0) \ + printk("\n"); \ + } \ + printk(KERN_DEBUG "\n"); \ + } \ + } while(0); + +void rtl_dbgp_flag_init(struct ieee80211_hw *hw); +void rtl_proc_add_one(struct ieee80211_hw *hw); +void rtl_proc_remove_one(struct ieee80211_hw *hw); +void rtl_proc_add_topdir(void); +void rtl_proc_remove_topdir(void); +#endif |