diff options
Diffstat (limited to 'drivers/staging/octeon/cvmx-helper-board.c')
| -rw-r--r-- | drivers/staging/octeon/cvmx-helper-board.c | 695 |
1 files changed, 0 insertions, 695 deletions
diff --git a/drivers/staging/octeon/cvmx-helper-board.c b/drivers/staging/octeon/cvmx-helper-board.c deleted file mode 100644 index 57d35dc63dd..00000000000 --- a/drivers/staging/octeon/cvmx-helper-board.c +++ /dev/null @@ -1,695 +0,0 @@ -/***********************license start*************** - * Author: Cavium Networks - * - * Contact: support@caviumnetworks.com - * This file is part of the OCTEON SDK - * - * Copyright (c) 2003-2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, but - * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or - * NONINFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this file; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * or visit http://www.gnu.org/licenses/. - * - * This file may also be available under a different license from Cavium. - * Contact Cavium Networks for more information - ***********************license end**************************************/ - -/* - * - * Helper functions to abstract board specific data about - * network ports from the rest of the cvmx-helper files. - */ - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-bootinfo.h> - -#include "cvmx-config.h" - -#include "cvmx-mdio.h" - -#include "cvmx-helper.h" -#include "cvmx-helper-util.h" -#include "cvmx-helper-board.h" - -#include "cvmx-gmxx-defs.h" -#include "cvmx-asxx-defs.h" - -/** - * cvmx_override_board_link_get(int ipd_port) is a function - * pointer. It is meant to allow customization of the process of - * talking to a PHY to determine link speed. It is called every - * time a PHY must be polled for link status. Users should set - * this pointer to a function before calling any cvmx-helper - * operations. - */ -cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) = - NULL; - -/** - * Return the MII PHY address associated with the given IPD - * port. A result of -1 means there isn't a MII capable PHY - * connected to this port. On chips supporting multiple MII - * busses the bus number is encoded in bits <15:8>. - * - * This function must be modified for every new Octeon board. - * Internally it uses switch statements based on the cvmx_sysinfo - * data to determine board types and revisions. It replies on the - * fact that every Octeon board receives a unique board type - * enumeration from the bootloader. - * - * @ipd_port: Octeon IPD port to get the MII address for. - * - * Returns MII PHY address and bus number or -1. - */ -int cvmx_helper_board_get_mii_address(int ipd_port) -{ - switch (cvmx_sysinfo_get()->board_type) { - case CVMX_BOARD_TYPE_SIM: - /* Simulator doesn't have MII */ - return -1; - case CVMX_BOARD_TYPE_EBT3000: - case CVMX_BOARD_TYPE_EBT5800: - case CVMX_BOARD_TYPE_THUNDER: - case CVMX_BOARD_TYPE_NICPRO2: - /* Interface 0 is SPI4, interface 1 is RGMII */ - if ((ipd_port >= 16) && (ipd_port < 20)) - return ipd_port - 16; - else - return -1; - case CVMX_BOARD_TYPE_KODAMA: - case CVMX_BOARD_TYPE_EBH3100: - case CVMX_BOARD_TYPE_HIKARI: - case CVMX_BOARD_TYPE_CN3010_EVB_HS5: - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - case CVMX_BOARD_TYPE_CN3020_EVB_HS5: - /* - * Port 0 is WAN connected to a PHY, Port 1 is GMII - * connected to a switch - */ - if (ipd_port == 0) - return 4; - else if (ipd_port == 1) - return 9; - else - return -1; - case CVMX_BOARD_TYPE_NAC38: - /* Board has 8 RGMII ports PHYs are 0-7 */ - if ((ipd_port >= 0) && (ipd_port < 4)) - return ipd_port; - else if ((ipd_port >= 16) && (ipd_port < 20)) - return ipd_port - 16 + 4; - else - return -1; - case CVMX_BOARD_TYPE_EBH3000: - /* Board has dual SPI4 and no PHYs */ - return -1; - case CVMX_BOARD_TYPE_EBH5200: - case CVMX_BOARD_TYPE_EBH5201: - case CVMX_BOARD_TYPE_EBT5200: - /* - * Board has 4 SGMII ports. The PHYs start right after the MII - * ports MII0 = 0, MII1 = 1, SGMII = 2-5. - */ - if ((ipd_port >= 0) && (ipd_port < 4)) - return ipd_port + 2; - else - return -1; - case CVMX_BOARD_TYPE_EBH5600: - case CVMX_BOARD_TYPE_EBH5601: - case CVMX_BOARD_TYPE_EBH5610: - /* - * Board has 8 SGMII ports. 4 connect out, two connect - * to a switch, and 2 loop to each other - */ - if ((ipd_port >= 0) && (ipd_port < 4)) - return ipd_port + 1; - else - return -1; - case CVMX_BOARD_TYPE_CUST_NB5: - if (ipd_port == 2) - return 4; - else - return -1; - case CVMX_BOARD_TYPE_NIC_XLE_4G: - /* Board has 4 SGMII ports. connected QLM3(interface 1) */ - if ((ipd_port >= 16) && (ipd_port < 20)) - return ipd_port - 16 + 1; - else - return -1; - case CVMX_BOARD_TYPE_BBGW_REF: - /* - * No PHYs are connected to Octeon, everything is - * through switch. - */ - return -1; - - case CVMX_BOARD_TYPE_CUST_WSX16: - if (ipd_port >= 0 && ipd_port <= 3) - return ipd_port; - else if (ipd_port >= 16 && ipd_port <= 19) - return ipd_port - 16 + 4; - else - return -1; - } - - /* Some unknown board. Somebody forgot to update this function... */ - cvmx_dprintf - ("cvmx_helper_board_get_mii_address: Unknown board type %d\n", - cvmx_sysinfo_get()->board_type); - return -1; -} - -/** - * This function is the board specific method of determining an - * ethernet ports link speed. Most Octeon boards have Marvell PHYs - * and are handled by the fall through case. This function must be - * updated for boards that don't have the normal Marvell PHYs. - * - * This function must be modified for every new Octeon board. - * Internally it uses switch statements based on the cvmx_sysinfo - * data to determine board types and revisions. It relies on the - * fact that every Octeon board receives a unique board type - * enumeration from the bootloader. - * - * @ipd_port: IPD input port associated with the port we want to get link - * status for. - * - * Returns The ports link status. If the link isn't fully resolved, this must - * return zero. - */ -cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) -{ - cvmx_helper_link_info_t result; - int phy_addr; - int is_broadcom_phy = 0; - - /* Give the user a chance to override the processing of this function */ - if (cvmx_override_board_link_get) - return cvmx_override_board_link_get(ipd_port); - - /* Unless we fix it later, all links are defaulted to down */ - result.u64 = 0; - - /* - * This switch statement should handle all ports that either don't use - * Marvell PHYS, or don't support in-band status. - */ - switch (cvmx_sysinfo_get()->board_type) { - case CVMX_BOARD_TYPE_SIM: - /* The simulator gives you a simulated 1Gbps full duplex link */ - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - case CVMX_BOARD_TYPE_EBH3100: - case CVMX_BOARD_TYPE_CN3010_EVB_HS5: - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - case CVMX_BOARD_TYPE_CN3020_EVB_HS5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - /* Fall through to the generic code below */ - break; - case CVMX_BOARD_TYPE_CUST_NB5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } else /* The other port uses a broadcom PHY */ - is_broadcom_phy = 1; - break; - case CVMX_BOARD_TYPE_BBGW_REF: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 2) { - /* Port 2 is not hooked up */ - result.u64 = 0; - return result; - } else { - /* Ports 0 and 1 connect to the switch */ - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - break; - } - - phy_addr = cvmx_helper_board_get_mii_address(ipd_port); - if (phy_addr != -1) { - if (is_broadcom_phy) { - /* - * Below we are going to read SMI/MDIO - * register 0x19 which works on Broadcom - * parts - */ - int phy_status = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - 0x19); - switch ((phy_status >> 8) & 0x7) { - case 0: - result.u64 = 0; - break; - case 1: - result.s.link_up = 1; - result.s.full_duplex = 0; - result.s.speed = 10; - break; - case 2: - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 10; - break; - case 3: - result.s.link_up = 1; - result.s.full_duplex = 0; - result.s.speed = 100; - break; - case 4: - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 100; - break; - case 5: - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 100; - break; - case 6: - result.s.link_up = 1; - result.s.full_duplex = 0; - result.s.speed = 1000; - break; - case 7: - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - break; - } - } else { - /* - * This code assumes we are using a Marvell - * Gigabit PHY. All the speed information can - * be read from register 17 in one - * go. Somebody using a different PHY will - * need to handle it above in the board - * specific area. - */ - int phy_status = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17); - - /* - * If the resolve bit 11 isn't set, see if - * autoneg is turned off (bit 12, reg 0). The - * resolve bit doesn't get set properly when - * autoneg is off, so force it. - */ - if ((phy_status & (1 << 11)) == 0) { - int auto_status = - cvmx_mdio_read(phy_addr >> 8, - phy_addr & 0xff, 0); - if ((auto_status & (1 << 12)) == 0) - phy_status |= 1 << 11; - } - - /* - * Only return a link if the PHY has finished - * auto negotiation and set the resolved bit - * (bit 11) - */ - if (phy_status & (1 << 11)) { - result.s.link_up = 1; - result.s.full_duplex = ((phy_status >> 13) & 1); - switch ((phy_status >> 14) & 3) { - case 0: /* 10 Mbps */ - result.s.speed = 10; - break; - case 1: /* 100 Mbps */ - result.s.speed = 100; - break; - case 2: /* 1 Gbps */ - result.s.speed = 1000; - break; - case 3: /* Illegal */ - result.u64 = 0; - break; - } - } - } - } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX) - || OCTEON_IS_MODEL(OCTEON_CN58XX) - || OCTEON_IS_MODEL(OCTEON_CN50XX)) { - /* - * We don't have a PHY address, so attempt to use - * in-band status. It is really important that boards - * not supporting in-band status never get - * here. Reading broken in-band status tends to do bad - * things - */ - union cvmx_gmxx_rxx_rx_inbnd inband_status; - int interface = cvmx_helper_get_interface_num(ipd_port); - int index = cvmx_helper_get_interface_index_num(ipd_port); - inband_status.u64 = - cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface)); - - result.s.link_up = inband_status.s.status; - result.s.full_duplex = inband_status.s.duplex; - switch (inband_status.s.speed) { - case 0: /* 10 Mbps */ - result.s.speed = 10; - break; - case 1: /* 100 Mbps */ - result.s.speed = 100; - break; - case 2: /* 1 Gbps */ - result.s.speed = 1000; - break; - case 3: /* Illegal */ - result.u64 = 0; - break; - } - } else { - /* - * We don't have a PHY address and we don't have - * in-band status. There is no way to determine the - * link speed. Return down assuming this port isn't - * wired - */ - result.u64 = 0; - } - - /* If link is down, return all fields as zero. */ - if (!result.s.link_up) - result.u64 = 0; - - return result; -} - -/** - * This function as a board specific method of changing the PHY - * speed, duplex, and auto-negotiation. This programs the PHY and - * not Octeon. This can be used to force Octeon's links to - * specific settings. - * - * @phy_addr: The address of the PHY to program - * @enable_autoneg: - * Non zero if you want to enable auto-negotiation. - * @link_info: Link speed to program. If the speed is zero and auto-negotiation - * is enabled, all possible negotiation speeds are advertised. - * - * Returns Zero on success, negative on failure - */ -int cvmx_helper_board_link_set_phy(int phy_addr, - cvmx_helper_board_set_phy_link_flags_types_t - link_flags, - cvmx_helper_link_info_t link_info) -{ - - /* Set the flow control settings based on link_flags */ - if ((link_flags & set_phy_link_flags_flow_control_mask) != - set_phy_link_flags_flow_control_dont_touch) { - cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; - reg_autoneg_adver.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER); - reg_autoneg_adver.s.asymmetric_pause = - (link_flags & set_phy_link_flags_flow_control_mask) == - set_phy_link_flags_flow_control_enable; - reg_autoneg_adver.s.pause = - (link_flags & set_phy_link_flags_flow_control_mask) == - set_phy_link_flags_flow_control_enable; - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER, - reg_autoneg_adver.u16); - } - - /* If speed isn't set and autoneg is on advertise all supported modes */ - if ((link_flags & set_phy_link_flags_autoneg) - && (link_info.s.speed == 0)) { - cvmx_mdio_phy_reg_control_t reg_control; - cvmx_mdio_phy_reg_status_t reg_status; - cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; - cvmx_mdio_phy_reg_extended_status_t reg_extended_status; - cvmx_mdio_phy_reg_control_1000_t reg_control_1000; - - reg_status.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_STATUS); - reg_autoneg_adver.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER); - reg_autoneg_adver.s.advert_100base_t4 = - reg_status.s.capable_100base_t4; - reg_autoneg_adver.s.advert_10base_tx_full = - reg_status.s.capable_10_full; - reg_autoneg_adver.s.advert_10base_tx_half = - reg_status.s.capable_10_half; - reg_autoneg_adver.s.advert_100base_tx_full = - reg_status.s.capable_100base_x_full; - reg_autoneg_adver.s.advert_100base_tx_half = - reg_status.s.capable_100base_x_half; - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER, - reg_autoneg_adver.u16); - if (reg_status.s.capable_extended_status) { - reg_extended_status.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_EXTENDED_STATUS); - reg_control_1000.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL_1000); - reg_control_1000.s.advert_1000base_t_full = - reg_extended_status.s.capable_1000base_t_full; - reg_control_1000.s.advert_1000base_t_half = - reg_extended_status.s.capable_1000base_t_half; - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL_1000, - reg_control_1000.u16); - } - reg_control.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL); - reg_control.s.autoneg_enable = 1; - reg_control.s.restart_autoneg = 1; - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); - } else if ((link_flags & set_phy_link_flags_autoneg)) { - cvmx_mdio_phy_reg_control_t reg_control; - cvmx_mdio_phy_reg_status_t reg_status; - cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; - cvmx_mdio_phy_reg_extended_status_t reg_extended_status; - cvmx_mdio_phy_reg_control_1000_t reg_control_1000; - - reg_status.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_STATUS); - reg_autoneg_adver.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER); - reg_autoneg_adver.s.advert_100base_t4 = 0; - reg_autoneg_adver.s.advert_10base_tx_full = 0; - reg_autoneg_adver.s.advert_10base_tx_half = 0; - reg_autoneg_adver.s.advert_100base_tx_full = 0; - reg_autoneg_adver.s.advert_100base_tx_half = 0; - if (reg_status.s.capable_extended_status) { - reg_extended_status.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_EXTENDED_STATUS); - reg_control_1000.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL_1000); - reg_control_1000.s.advert_1000base_t_full = 0; - reg_control_1000.s.advert_1000base_t_half = 0; - } - switch (link_info.s.speed) { - case 10: - reg_autoneg_adver.s.advert_10base_tx_full = - link_info.s.full_duplex; - reg_autoneg_adver.s.advert_10base_tx_half = - !link_info.s.full_duplex; - break; - case 100: - reg_autoneg_adver.s.advert_100base_tx_full = - link_info.s.full_duplex; - reg_autoneg_adver.s.advert_100base_tx_half = - !link_info.s.full_duplex; - break; - case 1000: - reg_control_1000.s.advert_1000base_t_full = - link_info.s.full_duplex; - reg_control_1000.s.advert_1000base_t_half = - !link_info.s.full_duplex; - break; - } - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_AUTONEG_ADVER, - reg_autoneg_adver.u16); - if (reg_status.s.capable_extended_status) - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL_1000, - reg_control_1000.u16); - reg_control.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL); - reg_control.s.autoneg_enable = 1; - reg_control.s.restart_autoneg = 1; - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); - } else { - cvmx_mdio_phy_reg_control_t reg_control; - reg_control.u16 = - cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL); - reg_control.s.autoneg_enable = 0; - reg_control.s.restart_autoneg = 1; - reg_control.s.duplex = link_info.s.full_duplex; - if (link_info.s.speed == 1000) { - reg_control.s.speed_msb = 1; - reg_control.s.speed_lsb = 0; - } else if (link_info.s.speed == 100) { - reg_control.s.speed_msb = 0; - reg_control.s.speed_lsb = 1; - } else if (link_info.s.speed == 10) { - reg_control.s.speed_msb = 0; - reg_control.s.speed_lsb = 0; - } - cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, - CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); - } - return 0; -} - -/** - * This function is called by cvmx_helper_interface_probe() after it - * determines the number of ports Octeon can support on a specific - * interface. This function is the per board location to override - * this value. It is called with the number of ports Octeon might - * support and should return the number of actual ports on the - * board. - * - * This function must be modifed for every new Octeon board. - * Internally it uses switch statements based on the cvmx_sysinfo - * data to determine board types and revisions. It relys on the - * fact that every Octeon board receives a unique board type - * enumeration from the bootloader. - * - * @interface: Interface to probe - * @supported_ports: - * Number of ports Octeon supports. - * - * Returns Number of ports the actual board supports. Many times this will - * simple be "support_ports". - */ -int __cvmx_helper_board_interface_probe(int interface, int supported_ports) -{ - switch (cvmx_sysinfo_get()->board_type) { - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - if (interface == 0) - return 2; - break; - case CVMX_BOARD_TYPE_BBGW_REF: - if (interface == 0) - return 2; - break; - case CVMX_BOARD_TYPE_NIC_XLE_4G: - if (interface == 0) - return 0; - break; - /* The 2nd interface on the EBH5600 is connected to the Marvel switch, - which we don't support. Disable ports connected to it */ - case CVMX_BOARD_TYPE_EBH5600: - if (interface == 1) - return 0; - break; - } - return supported_ports; -} - -/** - * Enable packet input/output from the hardware. This function is - * called after by cvmx_helper_packet_hardware_enable() to - * perform board specific initialization. For most boards - * nothing is needed. - * - * @interface: Interface to enable - * - * Returns Zero on success, negative on failure - */ -int __cvmx_helper_board_hardware_enable(int interface) -{ - if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { - if (interface == 0) { - /* Different config for switch port */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); - /* - * Boards with gigabit WAN ports need a - * different setting that is compatible with - * 100 Mbit settings - */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), - 0xc); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), - 0xc); - } - } else if (cvmx_sysinfo_get()->board_type == - CVMX_BOARD_TYPE_CN3010_EVB_HS5) { - /* - * Broadcom PHYs require differnet ASX - * clocks. Unfortunately many boards don't define a - * new board Id and simply mangle the - * CN3010_EVB_HS5 - */ - if (interface == 0) { - /* - * Some boards use a hacked up bootloader that - * identifies them as CN3010_EVB_HS5 - * evaluation boards. This leads to all kinds - * of configuration problems. Detect one - * case, and print warning, while trying to do - * the right thing. - */ - int phy_addr = cvmx_helper_board_get_mii_address(0); - if (phy_addr != -1) { - int phy_identifier = - cvmx_mdio_read(phy_addr >> 8, - phy_addr & 0xff, 0x2); - /* Is it a Broadcom PHY? */ - if (phy_identifier == 0x0143) { - cvmx_dprintf("\n"); - cvmx_dprintf("ERROR:\n"); - cvmx_dprintf - ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n"); - cvmx_dprintf - ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n"); - cvmx_dprintf - ("ERROR: All boards require a unique board type to identify them.\n"); - cvmx_dprintf("ERROR:\n"); - cvmx_dprintf("\n"); - cvmx_wait(1000000000); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX - (0, interface), 5); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX - (0, interface), 5); - } - } - } - } - return 0; -} |