diff options
Diffstat (limited to 'drivers/staging/comedi/Kconfig')
| -rw-r--r-- | drivers/staging/comedi/Kconfig | 133 |
1 files changed, 79 insertions, 54 deletions
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 8c8a5513225..a2f6957e7ee 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -96,11 +96,19 @@ config COMEDI_SKEL To compile this driver as a module, choose M here: the module will be called skel. +config COMEDI_SSV_DNP + tristate "SSV Embedded Systems DIL/Net-PC support" + depends on X86_32 || COMPILE_TEST + ---help--- + Enable support for SSV Embedded Systems DIL/Net-PC + + To compile this driver as a module, choose M here: the module will be + called ssv_dnp. + endif # COMEDI_MISC_DRIVERS menuconfig COMEDI_ISA_DRIVERS bool "Comedi ISA and PC/104 drivers" - depends on ISA ---help--- Enable comedi ISA and PC/104 drivers to be built @@ -122,8 +130,18 @@ config COMEDI_PCL724 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" select COMEDI_8255 ---help--- - Enable support for Advantech PCL-724, PCL-722, PCL-731 and - ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards + Enable support for ISA and PC/104 based 8255 digital i/o boards. This + driver provides a legacy comedi driver wrapper for the generic 8255 + support driver. + + Supported boards include: + Advantech PCL-724 24 channels + Advantech PCL-722 144 (or 96) channels + Advantech PCL-731 48 channels + ADlink ACL-7122 144 (or 96) channels + ADlink ACL-7124 24 channels + ADlink PET-48DIO 48 channels + WinSystems PCM-IO48 48 channels (PC/104) To compile this driver as a module, choose M here: the module will be called pcl724. @@ -142,16 +160,18 @@ config COMEDI_PCL730 Enable support for various simple ISA or PC/104 Digital I/O boards. These boards all use 8-bit I/O ports. - Advantech PCL-730 isolated - 16 in/16 out ttl - 16 in/16 out - ICP ISO-730 isolated - 16 in/16 out ttl - 16 in/16 out - ADlink ACL-7130 isolated - 16 in/16 out ttl - 16 in/16 out - Advantech PCM-3730 isolated - 8 in/8 out ttl - 16 in/16 out - Advantech PCL-725 isolated - 8 in/8 out - ICP P8R8-DIO isolated - 8 in/8 out - ADlink ACL-7225b isolated - 16 in/16 out - ICP P16R16-DIO isolated - 16 in/16 out - Advantech PCL-733 isolated - 32 in - Advantech PCL-734 isolated - 32 out + Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out + ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out + ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out + Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out + Advantech PCL-725 iso - 8 in/8 out + ICP P8R8-DIO iso - 8 in/8 out + ADlink ACL-7225b iso - 16 in/16 out + ICP P16R16-DIO iso - 16 in/16 out + Advantech PCL-733 iso - 32 in + Advantech PCL-734 iso - 32 out + Diamond Systems OPMM-1616-XT iso - 16 in/16 out + Diamond Systems PEARL-MM-P iso - 16 out To compile this driver as a module, choose M here: the module will be called pcl730. @@ -159,6 +179,7 @@ config COMEDI_PCL730 config COMEDI_PCL812 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" depends on VIRT_TO_BUS && ISA_DMA_API + select COMEDI_FC ---help--- Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, @@ -170,6 +191,7 @@ config COMEDI_PCL812 config COMEDI_PCL816 tristate "Advantech PCL-814 and PCL-816 ISA card support" depends on VIRT_TO_BUS && ISA_DMA_API + select COMEDI_FC ---help--- Enable support for Advantech PCL-814 and PCL-816 ISA cards @@ -179,6 +201,7 @@ config COMEDI_PCL816 config COMEDI_PCL818 tristate "Advantech PCL-718 and PCL-818 ISA card support" depends on VIRT_TO_BUS && ISA_DMA_API + select COMEDI_FC ---help--- Enable support for Advantech PCL-818 ISA cards PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 @@ -239,6 +262,14 @@ config COMEDI_RTI802 To compile this driver as a module, choose M here: the module will be called rti802. +config COMEDI_DAC02 + tristate "Keithley Metrabyte DAC02 compatible ISA card support" + ---help--- + Enable support for Keithley Metrabyte DAC02 compatible ISA cards. + + To compile this driver as a module, choose M here: the module will be + called dac02. + config COMEDI_DAS16M1 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" select COMEDI_8255 @@ -377,6 +408,14 @@ config COMEDI_DMM32AT To compile this driver as a module, choose M here: the module will be called dmm32at. +config COMEDI_UNIOXX5 + tristate "Fastwel UNIOxx-5 analog and digital io board support" + ---help--- + Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards + + To compile this driver as a module, choose M here: the module will be + called unioxx5. + config COMEDI_FL512 tristate "FL512 ISA card support" ---help--- @@ -403,6 +442,15 @@ config COMEDI_AIO_IIRO_16 To compile this driver as a module, choose M here: the module will be called aio_iiro_16. +config COMEDI_II_PCI20KC + tristate "Intelligent Instruments PCI-20001C carrier support" + ---help--- + Enable support for Intelligent Instruments PCI-20001C carrier + PCI-20001, PCI-20006 and PCI-20341 + + To compile this driver as a module, choose M here: the module will be + called ii_pci20kc. + config COMEDI_C6XDIGIO tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" ---help--- @@ -448,9 +496,9 @@ config COMEDI_NI_AT_AO config COMEDI_NI_ATMIO tristate "NI AT-MIO E series ISA-PNP card support" - depends on ISAPNP select COMEDI_8255 select COMEDI_NI_TIO + select COMEDI_FC ---help--- Enable support for National Instruments AT-MIO E series cards National Instruments AT-MIO-16E-1 (ni_atmio), @@ -461,11 +509,10 @@ config COMEDI_NI_ATMIO called ni_atmio. config COMEDI_NI_ATMIO16D - tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" - depends on ISAPNP + tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support" select COMEDI_8255 ---help--- - Enable support for National Instruments AT-MIO16/AT-MIO16D cards. + Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards. To compile this driver as a module, choose M here: the module will be called ni_atmio16d. @@ -473,7 +520,7 @@ config COMEDI_NI_ATMIO16D config COMEDI_NI_LABPC_ISA tristate "NI Lab-PC and compatibles ISA support" select COMEDI_NI_LABPC - depends on VIRT_TO_BUS + select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API && VIRT_TO_BUS ---help--- Enable support for National Instruments Lab-PC and compatibles Lab-PC-1200, Lab-PC-1200AI, Lab-PC+. @@ -525,15 +572,6 @@ config COMEDI_MULTIQ3 To compile this driver as a module, choose M here: the module will be called multiq3. -config COMEDI_POC - tristate "Generic driver for very simple devices" - ---help--- - Enable generic support for very simple / POC (Piece of Crap) boards, - Keithley Metrabyte DAC-02 (dac02). - - To compile this driver as a module, choose M here: the module will be - called poc. - config COMEDI_S526 tristate "Sensoray s526 support" ---help--- @@ -613,6 +651,7 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" + select COMEDI_ADDI_WATCHDOG ---help--- Enable support for ADDI-DATA APCI_1564 cards @@ -719,6 +758,7 @@ config COMEDI_ADL_PCI9118 config COMEDI_ADV_PCI1710 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support" + select COMEDI_FC ---help--- Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720 and PCI-1731 @@ -822,6 +862,7 @@ config COMEDI_DAS08_PCI config COMEDI_DT3000 tristate "Data Translation DT3000 series support" + select COMEDI_FC ---help--- Enable support for Data Translation DT3000 series DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and @@ -839,14 +880,6 @@ config COMEDI_DYNA_PCI10XX To compile this driver as a module, choose M here: the module will be called dyna_pci10xx. -config COMEDI_UNIOXX5 - tristate "Fastwel UNIOxx-5 analog and digital io board support" - ---help--- - Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards - - To compile this driver as a module, choose M here: the module will be - called unioxx5. - config COMEDI_GSC_HPDI tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" select COMEDI_FC @@ -858,6 +891,12 @@ config COMEDI_GSC_HPDI To compile this driver as a module, choose M here: the module will be called gsc_hpdi. +config COMEDI_MF6X4 + tristate "Humusoft MF634 and MF624 DAQ Card support" + ---help--- + This driver supports both Humusoft MF634 and MF624 Data acquisition + cards. The legacy Humusoft MF614 card is not supported. + config COMEDI_ICP_MULTI tristate "Inova ICP_MULTI support" ---help--- @@ -866,15 +905,6 @@ config COMEDI_ICP_MULTI To compile this driver as a module, choose M here: the module will be called icp_multi. -config COMEDI_II_PCI20KC - tristate "Intelligent Instruments PCI-20001C carrier support" - ---help--- - Enable support for Intelligent Instruments PCI-20001C carrier - PCI-20001, PCI-20006 and PCI-20341 - - To compile this driver as a module, choose M here: the module will be - called ii_pci20kc. - config COMEDI_DAQBOARD2000 tristate "IOtech DAQboard/2000 support" select COMEDI_8255 @@ -974,8 +1004,6 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" - depends on HAS_DMA - select COMEDI_MITE ---help--- Enable support for the National Instruments 6527 PCI card @@ -1078,16 +1106,9 @@ config COMEDI_S626 To compile this driver as a module, choose M here: the module will be called s626. -config COMEDI_SSV_DNP - tristate "SSV Embedded Systems DIL/Net-PC support" - ---help--- - Enable support for SSV Embedded Systems DIL/Net-PC - - To compile this driver as a module, choose M here: the module will be - called ssv_dnp. - config COMEDI_MITE depends on HAS_DMA + select COMEDI_FC tristate config COMEDI_NI_TIOCMD @@ -1166,6 +1187,7 @@ config COMEDI_NI_MIO_CS config COMEDI_QUATECH_DAQP_CS tristate "Quatech DAQP PCMCIA data capture card support" + select COMEDI_FC ---help--- Enable support for the Quatech DAQP PCMCIA data capture cards DAQP-208 and DAQP-308 @@ -1262,6 +1284,9 @@ config COMEDI_NI_LABPC select COMEDI_8255 select COMEDI_FC +config COMEDI_NI_LABPC_ISADMA + tristate + config COMEDI_NI_TIO tristate |