diff options
Diffstat (limited to 'drivers/staging/bcm/InterfaceInit.c')
| -rw-r--r-- | drivers/staging/bcm/InterfaceInit.c | 436 |
1 files changed, 227 insertions, 209 deletions
diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c index 79058ce5b33..7c04c73e3bc 100644 --- a/drivers/staging/bcm/InterfaceInit.c +++ b/drivers/staging/bcm/InterfaceInit.c @@ -1,5 +1,5 @@ #include "headers.h" - +#include <linux/usb/ch9.h> static struct usb_device_id InterfaceUsbtable[] = { { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) }, { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) }, @@ -30,19 +30,22 @@ static void InterfaceAdapterFree(struct bcm_interface_adapter *psIntfAdapter) int i = 0; /* Wake up the wait_queue... */ - if (psIntfAdapter->psAdapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY) { + if (psIntfAdapter->psAdapter->LEDInfo.led_thread_running & + BCM_LED_THREAD_RUNNING_ACTIVELY) { psIntfAdapter->psAdapter->DriverState = DRIVER_HALT; wake_up(&psIntfAdapter->psAdapter->LEDInfo.notify_led_event); } reset_card_proc(psIntfAdapter->psAdapter); /* - * worst case time taken by the RDM/WRM will be 5 sec. will check after every 100 ms - * to accertain the device is not being accessed. After this No RDM/WRM should be made. + * worst case time taken by the RDM/WRM will be 5 sec. will check after + * every 100 ms to accertain the device is not being accessed. After + * this No RDM/WRM should be made. */ while (psIntfAdapter->psAdapter->DeviceAccess) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Device is being accessed.\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Device is being accessed.\n"); msleep(100); } /* Free interrupt URB */ @@ -69,8 +72,9 @@ static void InterfaceAdapterFree(struct bcm_interface_adapter *psIntfAdapter) static void ConfigureEndPointTypesThroughEEPROM(struct bcm_mini_adapter *Adapter) { - unsigned long ulReg = 0; + u32 ulReg; int bytes; + struct bcm_interface_adapter *interfaceAdapter; /* Program EP2 MAX_PKT_SIZE */ ulReg = ntohl(EP2_MPS_REG); @@ -80,7 +84,9 @@ static void ConfigureEndPointTypesThroughEEPROM(struct bcm_mini_adapter *Adapter ulReg = ntohl(EP2_CFG_REG); BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x132, 4, TRUE); - if (((struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter))->bHighSpeedDevice == TRUE) { + interfaceAdapter = + (struct bcm_interface_adapter *)(Adapter->pvInterfaceAdapter); + if (interfaceAdapter->bHighSpeedDevice) { ulReg = ntohl(EP2_CFG_INT); BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x136, 4, TRUE); } else { @@ -96,10 +102,10 @@ static void ConfigureEndPointTypesThroughEEPROM(struct bcm_mini_adapter *Adapter BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x140, 4, TRUE); /* Program TX EP as interrupt(Alternate Setting) */ - bytes = rdmalt(Adapter, 0x0F0110F8, (u32 *)&ulReg, sizeof(u32)); + bytes = rdmalt(Adapter, 0x0F0110F8, &ulReg, sizeof(u32)); if (bytes < 0) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "reading of Tx EP failed\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, "reading of Tx EP failed\n"); return; } ulReg |= 0x6; @@ -119,18 +125,18 @@ static void ConfigureEndPointTypesThroughEEPROM(struct bcm_mini_adapter *Adapter * Update EEPROM Version. * Read 4 bytes from 508 and modify 511 and 510. */ - ReadBeceemEEPROM(Adapter, 0x1FC, (PUINT)&ulReg); + ReadBeceemEEPROM(Adapter, 0x1FC, &ulReg); ulReg &= 0x0101FFFF; BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x1FC, 4, TRUE); /* Update length field if required. Also make the string NULL terminated. */ - ReadBeceemEEPROM(Adapter, 0xA8, (PUINT)&ulReg); + ReadBeceemEEPROM(Adapter, 0xA8, &ulReg); if ((ulReg&0x00FF0000)>>16 > 0x30) { ulReg = (ulReg&0xFF00FFFF)|(0x30<<16); BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0xA8, 4, TRUE); } - ReadBeceemEEPROM(Adapter, 0x148, (PUINT)&ulReg); + ReadBeceemEEPROM(Adapter, 0x148, &ulReg); if ((ulReg&0x00FF0000)>>16 > 0x30) { ulReg = (ulReg&0xFF00FFFF)|(0x30<<16); BeceemEEPROMBulkWrite(Adapter, (PUCHAR)&ulReg, 0x148, 4, TRUE); @@ -150,7 +156,8 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi struct net_device *ndev; /* Reserve one extra queue for the bit-bucket */ - ndev = alloc_etherdev_mq(sizeof(struct bcm_mini_adapter), NO_OF_QUEUES+1); + ndev = alloc_etherdev_mq(sizeof(struct bcm_mini_adapter), + NO_OF_QUEUES + 1); if (ndev == NULL) { dev_err(&udev->dev, DRV_NAME ": no memory for device\n"); return -ENOMEM; @@ -169,13 +176,14 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi /* * Technically, one can start using BCM_DEBUG_PRINT after this point. - * However, realize that by default the Type/Subtype bitmaps are all zero now; - * so no prints will actually appear until the TestApp turns on debug paths via - * the ioctl(); so practically speaking, in early init, no logging happens. + * However, realize that by default the Type/Subtype bitmaps are all + * zero now; so no prints will actually appear until the TestApp turns + * on debug paths via the ioctl(); so practically speaking, in early + * init, no logging happens. * - * A solution (used below): we explicitly set the bitmaps to 1 for Type=DBG_TYPE_INITEXIT - * and ALL subtype's of the same. Now all bcm debug statements get logged, enabling debug - * during early init. + * A solution (used below): we explicitly set the bitmaps to 1 for + * Type=DBG_TYPE_INITEXIT and ALL subtype's of the same. Now all bcm + * debug statements get logged, enabling debug during early init. * Further, we turn this OFF once init_module() completes. */ @@ -191,7 +199,7 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi /* Allocate interface adapter structure */ psIntfAdapter = kzalloc(sizeof(struct bcm_interface_adapter), - GFP_KERNEL); + GFP_KERNEL); if (psIntfAdapter == NULL) { AdapterFree(psAdapter); return -ENOMEM; @@ -205,7 +213,7 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi usb_set_intfdata(intf, psIntfAdapter); BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "psIntfAdapter 0x%p\n", psIntfAdapter); + "psIntfAdapter 0x%p\n", psIntfAdapter); retval = InterfaceAdapterInit(psIntfAdapter); if (retval) { /* If the Firmware/Cfg File is not present @@ -213,12 +221,13 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi * download the files. */ if (-ENOENT == retval) { - BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "File Not Found. Use app to download.\n"); + BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "File Not Found. Use app to download.\n"); return STATUS_SUCCESS; } - BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "InterfaceAdapterInit failed.\n"); + BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, "InterfaceAdapterInit failed.\n"); usb_set_intfdata(intf, NULL); udev = interface_to_usbdev(intf); usb_put_dev(udev); @@ -228,7 +237,10 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi if (psAdapter->chip_id > T3) { uint32_t uiNackZeroLengthInt = 4; - retval = wrmalt(psAdapter, DISABLE_USB_ZERO_LEN_INT, &uiNackZeroLengthInt, sizeof(uiNackZeroLengthInt)); + retval = + wrmalt(psAdapter, DISABLE_USB_ZERO_LEN_INT, + &uiNackZeroLengthInt, + sizeof(uiNackZeroLengthInt)); if (retval) return retval; } @@ -242,9 +254,11 @@ static int usbbcm_device_probe(struct usb_interface *intf, const struct usb_devi intf->needs_remote_wakeup = 1; usb_enable_autosuspend(udev); device_init_wakeup(&intf->dev, 1); - INIT_WORK(&psIntfAdapter->usbSuspendWork, putUsbSuspend); - BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Enabling USB Auto-Suspend\n"); + INIT_WORK(&psIntfAdapter->usbSuspendWork, + putUsbSuspend); + BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Enabling USB Auto-Suspend\n"); #endif } else { intf->needs_remote_wakeup = 0; @@ -271,7 +285,7 @@ static void usbbcm_disconnect(struct usb_interface *intf) if (psAdapter->bDoSuspend) intf->needs_remote_wakeup = 0; - psAdapter->device_removed = TRUE ; + psAdapter->device_removed = TRUE; usb_set_intfdata(intf, NULL); InterfaceAdapterFree(psIntfAdapter); usb_put_dev(udev); @@ -285,8 +299,10 @@ static int AllocUsbCb(struct bcm_interface_adapter *psIntfAdapter) psIntfAdapter->asUsbTcb[i].urb = usb_alloc_urb(0, GFP_KERNEL); if (psIntfAdapter->asUsbTcb[i].urb == NULL) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, - "Can't allocate Tx urb for index %d\n", i); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_PRINTK, 0, 0, + "Can't allocate Tx urb for index %d\n", + i); return -ENOMEM; } } @@ -295,19 +311,25 @@ static int AllocUsbCb(struct bcm_interface_adapter *psIntfAdapter) psIntfAdapter->asUsbRcb[i].urb = usb_alloc_urb(0, GFP_KERNEL); if (psIntfAdapter->asUsbRcb[i].urb == NULL) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, - "Can't allocate Rx urb for index %d\n", i); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_PRINTK, 0, 0, + "Can't allocate Rx urb for index %d\n", + i); return -ENOMEM; } - psIntfAdapter->asUsbRcb[i].urb->transfer_buffer = kmalloc(MAX_DATA_BUFFER_SIZE, GFP_KERNEL); + psIntfAdapter->asUsbRcb[i].urb->transfer_buffer = + kmalloc(MAX_DATA_BUFFER_SIZE, GFP_KERNEL); if (psIntfAdapter->asUsbRcb[i].urb->transfer_buffer == NULL) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, - "Can't allocate Rx buffer for index %d\n", i); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_PRINTK, 0, 0, + "Can't allocate Rx buffer for index %d\n", + i); return -ENOMEM; } - psIntfAdapter->asUsbRcb[i].urb->transfer_buffer_length = MAX_DATA_BUFFER_SIZE; + psIntfAdapter->asUsbRcb[i].urb->transfer_buffer_length = + MAX_DATA_BUFFER_SIZE; } return 0; } @@ -322,24 +344,29 @@ static int device_run(struct bcm_interface_adapter *psIntfAdapter) pr_err(DRV_NAME "InitCardAndDownloadFirmware failed.\n"); return status; } - if (TRUE == psIntfAdapter->psAdapter->fw_download_done) { + if (psIntfAdapter->psAdapter->fw_download_done) { if (StartInterruptUrb(psIntfAdapter)) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Cannot send interrupt in URB\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Cannot send interrupt in URB\n"); } /* - * now register the cntrl interface. - * after downloading the f/w waiting for 5 sec to get the mailbox interrupt. + * now register the cntrl interface. after downloading the f/w + * waiting for 5 sec to get the mailbox interrupt. */ - psIntfAdapter->psAdapter->waiting_to_fw_download_done = FALSE; - value = wait_event_timeout(psIntfAdapter->psAdapter->ioctl_fw_dnld_wait_queue, - psIntfAdapter->psAdapter->waiting_to_fw_download_done, 5*HZ); + psIntfAdapter->psAdapter->waiting_to_fw_download_done = false; + value = wait_event_timeout( + psIntfAdapter->psAdapter->ioctl_fw_dnld_wait_queue, + psIntfAdapter->psAdapter->waiting_to_fw_download_done, + 5 * HZ); if (value == 0) pr_err(DRV_NAME ": Timeout waiting for mailbox interrupt.\n"); - if (register_control_device_interface(psIntfAdapter->psAdapter) < 0) { + if (register_control_device_interface( + psIntfAdapter->psAdapter) < 0) { pr_err(DRV_NAME ": Register Control Device failed.\n"); return -EIO; } @@ -347,81 +374,6 @@ static int device_run(struct bcm_interface_adapter *psIntfAdapter) return 0; } - -static inline int bcm_usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -static inline int bcm_usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -static inline int bcm_usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -static inline int bcm_usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -static inline int bcm_usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -static inline int bcm_usb_endpoint_xfer_control(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -static inline int bcm_usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -static inline int bcm_usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -static inline int bcm_usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_bulk(epd) && bcm_usb_endpoint_dir_in(epd); -} - -static inline int bcm_usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_bulk(epd) && bcm_usb_endpoint_dir_out(epd); -} - -static inline int bcm_usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_int(epd) && bcm_usb_endpoint_dir_in(epd); -} - -static inline int bcm_usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_int(epd) && bcm_usb_endpoint_dir_out(epd); -} - -static inline int bcm_usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_isoc(epd) && bcm_usb_endpoint_dir_in(epd); -} - -static inline int bcm_usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) -{ - return bcm_usb_endpoint_xfer_isoc(epd) && bcm_usb_endpoint_dir_out(epd); -} - static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) { struct usb_host_interface *iface_desc; @@ -429,23 +381,27 @@ static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) size_t buffer_size; unsigned long value; int retval = 0; - int usedIntOutForBulkTransfer = 0 ; - BOOLEAN bBcm16 = FALSE; + int usedIntOutForBulkTransfer = 0; + bool bBcm16 = false; UINT uiData = 0; int bytes; /* Store the usb dev into interface adapter */ - psIntfAdapter->udev = usb_get_dev(interface_to_usbdev(psIntfAdapter->interface)); + psIntfAdapter->udev = + usb_get_dev(interface_to_usbdev(psIntfAdapter->interface)); - psIntfAdapter->bHighSpeedDevice = (psIntfAdapter->udev->speed == USB_SPEED_HIGH); + psIntfAdapter->bHighSpeedDevice = + (psIntfAdapter->udev->speed == USB_SPEED_HIGH); psIntfAdapter->psAdapter->interface_rdm = BcmRDM; psIntfAdapter->psAdapter->interface_wrm = BcmWRM; bytes = rdmalt(psIntfAdapter->psAdapter, CHIP_ID_REG, - (u32 *)&(psIntfAdapter->psAdapter->chip_id), sizeof(u32)); + (u32 *) &(psIntfAdapter->psAdapter->chip_id), + sizeof(u32)); if (bytes < 0) { retval = bytes; - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "CHIP ID Read Failed\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, + "CHIP ID Read Failed\n"); return retval; } @@ -453,81 +409,119 @@ static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) psIntfAdapter->psAdapter->chip_id &= ~0xF0; dev_info(&psIntfAdapter->udev->dev, "RDM Chip ID 0x%lx\n", - psIntfAdapter->psAdapter->chip_id); + psIntfAdapter->psAdapter->chip_id); iface_desc = psIntfAdapter->interface->cur_altsetting; if (psIntfAdapter->psAdapter->chip_id == T3B) { - /* T3B device will have EEPROM, check if EEPROM is proper and BCM16 can be done or not. */ + /* T3B device will have EEPROM, check if EEPROM is proper and + * BCM16 can be done or not. */ BeceemEEPROMBulkRead(psIntfAdapter->psAdapter, &uiData, 0x0, 4); if (uiData == BECM) bBcm16 = TRUE; - dev_info(&psIntfAdapter->udev->dev, "number of alternate setting %d\n", - psIntfAdapter->interface->num_altsetting); + dev_info(&psIntfAdapter->udev->dev, + "number of alternate setting %d\n", + psIntfAdapter->interface->num_altsetting); if (bBcm16 == TRUE) { - /* selecting alternate setting one as a default setting for High Speed modem. */ + /* selecting alternate setting one as a default setting + * for High Speed modem. */ if (psIntfAdapter->bHighSpeedDevice) - retval = usb_set_interface(psIntfAdapter->udev, DEFAULT_SETTING_0, ALTERNATE_SETTING_1); - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "BCM16 is applicable on this dongle\n"); - if (retval || (psIntfAdapter->bHighSpeedDevice == FALSE)) { - usedIntOutForBulkTransfer = EP2 ; + retval = usb_set_interface(psIntfAdapter->udev, + DEFAULT_SETTING_0, + ALTERNATE_SETTING_1); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "BCM16 is applicable on this dongle\n"); + if (retval || !psIntfAdapter->bHighSpeedDevice) { + usedIntOutForBulkTransfer = EP2; endpoint = &iface_desc->endpoint[EP2].desc; - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n"); /* - * If Modem is high speed device EP2 should be INT OUT End point - * If Mode is FS then EP2 should be bulk end point + * If Modem is high speed device EP2 should be + * INT OUT End point + * + * If Mode is FS then EP2 should be bulk end + * point */ - if (((psIntfAdapter->bHighSpeedDevice == TRUE) && (bcm_usb_endpoint_is_int_out(endpoint) == FALSE)) - || ((psIntfAdapter->bHighSpeedDevice == FALSE) && (bcm_usb_endpoint_is_bulk_out(endpoint) == FALSE))) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Configuring the EEPROM\n"); + if ((psIntfAdapter->bHighSpeedDevice && + !usb_endpoint_is_int_out(endpoint)) || + (!psIntfAdapter->bHighSpeedDevice && + !usb_endpoint_is_bulk_out(endpoint))) { + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Configuring the EEPROM\n"); /* change the EP2, EP4 to INT OUT end point */ - ConfigureEndPointTypesThroughEEPROM(psIntfAdapter->psAdapter); + ConfigureEndPointTypesThroughEEPROM( + psIntfAdapter->psAdapter); /* - * It resets the device and if any thing gets changed - * in USB descriptor it will show fail and re-enumerate - * the device + * It resets the device and if any thing + * gets changed in USB descriptor it + * will show fail and re-enumerate the + * device */ - retval = usb_reset_device(psIntfAdapter->udev); + retval = usb_reset_device( + psIntfAdapter->udev); if (retval) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "reset failed. Re-enumerating the device.\n"); - return retval ; + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, + DRV_ENTRY, + DBG_LVL_ALL, + "reset failed. Re-enumerating the device.\n"); + return retval; } } - if ((psIntfAdapter->bHighSpeedDevice == FALSE) && bcm_usb_endpoint_is_bulk_out(endpoint)) { + if (!psIntfAdapter->bHighSpeedDevice && + usb_endpoint_is_bulk_out(endpoint)) { /* Once BULK is selected in FS mode. Revert it back to INT. Else USB_IF will fail. */ UINT _uiData = ntohl(EP2_CFG_INT); - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Reverting Bulk to INT as it is in Full Speed mode.\n"); - BeceemEEPROMBulkWrite(psIntfAdapter->psAdapter, (PUCHAR)&_uiData, 0x136, 4, TRUE); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Reverting Bulk to INT as it is in Full Speed mode.\n"); + BeceemEEPROMBulkWrite( + psIntfAdapter->psAdapter, + (PUCHAR) & _uiData, + 0x136, 4, TRUE); } } else { - usedIntOutForBulkTransfer = EP4 ; + usedIntOutForBulkTransfer = EP4; endpoint = &iface_desc->endpoint[EP4].desc; - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Choosing AltSetting as a default setting.\n"); - if (bcm_usb_endpoint_is_int_out(endpoint) == FALSE) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Dongle does not have BCM16 Fix.\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Choosing AltSetting as a default setting.\n"); + if (!usb_endpoint_is_int_out(endpoint)) { + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, + DRV_ENTRY, DBG_LVL_ALL, + "Dongle does not have BCM16 Fix.\n"); /* change the EP2, EP4 to INT OUT end point and use EP4 in altsetting */ - ConfigureEndPointTypesThroughEEPROM(psIntfAdapter->psAdapter); + ConfigureEndPointTypesThroughEEPROM( + psIntfAdapter->psAdapter); /* - * It resets the device and if any thing gets changed in - * USB descriptor it will show fail and re-enumerate the + * It resets the device and if any thing + * gets changed in USB descriptor it + * will show fail and re-enumerate the * device */ - retval = usb_reset_device(psIntfAdapter->udev); + retval = usb_reset_device( + psIntfAdapter->udev); if (retval) { - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "reset failed. Re-enumerating the device.\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, + DRV_ENTRY, + DBG_LVL_ALL, + "reset failed. Re-enumerating the device.\n"); return retval; } @@ -541,49 +535,69 @@ static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) for (value = 0; value < iface_desc->desc.bNumEndpoints; ++value) { endpoint = &iface_desc->endpoint[value].desc; - if (!psIntfAdapter->sBulkIn.bulk_in_endpointAddr && bcm_usb_endpoint_is_bulk_in(endpoint)) { + if (!psIntfAdapter->sBulkIn.bulk_in_endpointAddr && + usb_endpoint_is_bulk_in(endpoint)) { buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); psIntfAdapter->sBulkIn.bulk_in_size = buffer_size; - psIntfAdapter->sBulkIn.bulk_in_endpointAddr = endpoint->bEndpointAddress; - psIntfAdapter->sBulkIn.bulk_in_pipe = - usb_rcvbulkpipe(psIntfAdapter->udev, - psIntfAdapter->sBulkIn.bulk_in_endpointAddr); + psIntfAdapter->sBulkIn.bulk_in_endpointAddr = + endpoint->bEndpointAddress; + psIntfAdapter->sBulkIn.bulk_in_pipe = usb_rcvbulkpipe( + psIntfAdapter->udev, + psIntfAdapter->sBulkIn.bulk_in_endpointAddr); } - if (!psIntfAdapter->sBulkOut.bulk_out_endpointAddr && bcm_usb_endpoint_is_bulk_out(endpoint)) { - psIntfAdapter->sBulkOut.bulk_out_endpointAddr = endpoint->bEndpointAddress; - psIntfAdapter->sBulkOut.bulk_out_pipe = - usb_sndbulkpipe(psIntfAdapter->udev, + if (!psIntfAdapter->sBulkOut.bulk_out_endpointAddr && + usb_endpoint_is_bulk_out(endpoint)) { + psIntfAdapter->sBulkOut.bulk_out_endpointAddr = + endpoint->bEndpointAddress; + psIntfAdapter->sBulkOut.bulk_out_pipe = usb_sndbulkpipe( + psIntfAdapter->udev, psIntfAdapter->sBulkOut.bulk_out_endpointAddr); } - if (!psIntfAdapter->sIntrIn.int_in_endpointAddr && bcm_usb_endpoint_is_int_in(endpoint)) { + if (!psIntfAdapter->sIntrIn.int_in_endpointAddr && + usb_endpoint_is_int_in(endpoint)) { buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); psIntfAdapter->sIntrIn.int_in_size = buffer_size; - psIntfAdapter->sIntrIn.int_in_endpointAddr = endpoint->bEndpointAddress; - psIntfAdapter->sIntrIn.int_in_interval = endpoint->bInterval; + psIntfAdapter->sIntrIn.int_in_endpointAddr = + endpoint->bEndpointAddress; + psIntfAdapter->sIntrIn.int_in_interval = + endpoint->bInterval; psIntfAdapter->sIntrIn.int_in_buffer = - kmalloc(buffer_size, GFP_KERNEL); + kmalloc(buffer_size, GFP_KERNEL); if (!psIntfAdapter->sIntrIn.int_in_buffer) return -EINVAL; } - if (!psIntfAdapter->sIntrOut.int_out_endpointAddr && bcm_usb_endpoint_is_int_out(endpoint)) { + if (!psIntfAdapter->sIntrOut.int_out_endpointAddr && + usb_endpoint_is_int_out(endpoint)) { if (!psIntfAdapter->sBulkOut.bulk_out_endpointAddr && - (psIntfAdapter->psAdapter->chip_id == T3B) && (value == usedIntOutForBulkTransfer)) { + (psIntfAdapter->psAdapter->chip_id == T3B) && + (value == usedIntOutForBulkTransfer)) { /* use first intout end point as a bulk out end point */ - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - psIntfAdapter->sBulkOut.bulk_out_size = buffer_size; - psIntfAdapter->sBulkOut.bulk_out_endpointAddr = endpoint->bEndpointAddress; - psIntfAdapter->sBulkOut.bulk_out_pipe = usb_sndintpipe(psIntfAdapter->udev, - psIntfAdapter->sBulkOut.bulk_out_endpointAddr); - psIntfAdapter->sBulkOut.int_out_interval = endpoint->bInterval; + buffer_size = + le16_to_cpu(endpoint->wMaxPacketSize); + psIntfAdapter->sBulkOut.bulk_out_size = + buffer_size; + psIntfAdapter->sBulkOut.bulk_out_endpointAddr = + endpoint->bEndpointAddress; + psIntfAdapter->sBulkOut.bulk_out_pipe = + usb_sndintpipe(psIntfAdapter->udev, + psIntfAdapter->sBulkOut + .bulk_out_endpointAddr); + psIntfAdapter->sBulkOut.int_out_interval = + endpoint->bInterval; } else if (value == EP6) { - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - psIntfAdapter->sIntrOut.int_out_size = buffer_size; - psIntfAdapter->sIntrOut.int_out_endpointAddr = endpoint->bEndpointAddress; - psIntfAdapter->sIntrOut.int_out_interval = endpoint->bInterval; - psIntfAdapter->sIntrOut.int_out_buffer = kmalloc(buffer_size, GFP_KERNEL); + buffer_size = + le16_to_cpu(endpoint->wMaxPacketSize); + psIntfAdapter->sIntrOut.int_out_size = + buffer_size; + psIntfAdapter->sIntrOut.int_out_endpointAddr = + endpoint->bEndpointAddress; + psIntfAdapter->sIntrOut.int_out_interval = + endpoint->bInterval; + psIntfAdapter->sIntrOut.int_out_buffer = + kmalloc(buffer_size, GFP_KERNEL); if (!psIntfAdapter->sIntrOut.int_out_buffer) return -EINVAL; } @@ -594,14 +608,14 @@ static int InterfaceAdapterInit(struct bcm_interface_adapter *psIntfAdapter) psIntfAdapter->psAdapter->bcm_file_download = InterfaceFileDownload; psIntfAdapter->psAdapter->bcm_file_readback_from_chip = - InterfaceFileReadbackFromChip; + InterfaceFileReadbackFromChip; psIntfAdapter->psAdapter->interface_transmit = InterfaceTransmitPacket; retval = CreateInterruptUrb(psIntfAdapter); if (retval) { BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, - "Cannot create interrupt urb\n"); + "Cannot create interrupt urb\n"); return retval; } @@ -618,20 +632,24 @@ static int InterfaceSuspend(struct usb_interface *intf, pm_message_t message) psIntfAdapter->bSuspended = TRUE; - if (TRUE == psIntfAdapter->bPreparingForBusSuspend) { - psIntfAdapter->bPreparingForBusSuspend = FALSE; + if (psIntfAdapter->bPreparingForBusSuspend) { + psIntfAdapter->bPreparingForBusSuspend = false; if (psIntfAdapter->psAdapter->LinkStatus == LINKUP_DONE) { - psIntfAdapter->psAdapter->IdleMode = TRUE ; - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Host Entered in PMU Idle Mode.\n"); + psIntfAdapter->psAdapter->IdleMode = TRUE; + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Host Entered in PMU Idle Mode.\n"); } else { psIntfAdapter->psAdapter->bShutStatus = TRUE; - BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, - "Host Entered in PMU Shutdown Mode.\n"); + BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, + DBG_TYPE_INITEXIT, DRV_ENTRY, + DBG_LVL_ALL, + "Host Entered in PMU Shutdown Mode.\n"); } } - psIntfAdapter->psAdapter->bPreparingForLowPowerMode = FALSE; + psIntfAdapter->psAdapter->bPreparingForLowPowerMode = false; /* Signaling the control pkt path */ wake_up(&psIntfAdapter->psAdapter->lowpower_mode_wait_queue); @@ -644,7 +662,7 @@ static int InterfaceResume(struct usb_interface *intf) struct bcm_interface_adapter *psIntfAdapter = usb_get_intfdata(intf); mdelay(100); - psIntfAdapter->bSuspended = FALSE; + psIntfAdapter->bSuspended = false; StartInterruptUrb(psIntfAdapter); InterfaceRx(psIntfAdapter); |