aboutsummaryrefslogtreecommitdiff
path: root/drivers/ssb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ssb')
-rw-r--r--drivers/ssb/Kconfig6
-rw-r--r--drivers/ssb/Makefile1
-rw-r--r--drivers/ssb/driver_chipcommon.c65
-rw-r--r--drivers/ssb/driver_extif.c25
-rw-r--r--drivers/ssb/driver_pcicore.c45
-rw-r--r--drivers/ssb/embedded.c132
-rw-r--r--drivers/ssb/main.c4
7 files changed, 256 insertions, 22 deletions
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index d976660cb7f..78fd33125e0 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -105,6 +105,12 @@ config SSB_DRIVER_MIPS
If unsure, say N
+# Assumption: We are on embedded, if we compile the MIPS core.
+config SSB_EMBEDDED
+ bool
+ depends on SSB_DRIVER_MIPS
+ default y
+
config SSB_DRIVER_EXTIF
bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
depends on SSB_DRIVER_MIPS && EXPERIMENTAL
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index 7be39759580..e235144add7 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -1,5 +1,6 @@
# core
ssb-y += main.o scan.o
+ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o
# host support
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 6fbf1c53b6f..e586321a473 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -39,12 +39,14 @@ static inline void chipco_write32(struct ssb_chipcommon *cc,
ssb_write32(cc->dev, offset, value);
}
-static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
- u32 mask, u32 value)
+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
+ u32 mask, u32 value)
{
value &= mask;
value |= chipco_read32(cc, offset) & ~mask;
chipco_write32(cc, offset, value);
+
+ return value;
}
void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
@@ -356,14 +358,29 @@ u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
}
-void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+}
+
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+}
+
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+}
+
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
}
-void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
}
#ifdef CONFIG_SSB_SERIAL
@@ -376,6 +393,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
unsigned int irq;
u32 baud_base, div;
u32 i, n;
+ unsigned int ccrev = cc->dev->id.revision;
plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
irq = ssb_mips_irq(cc->dev);
@@ -387,14 +405,39 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
div = 1;
} else {
- if (cc->dev->id.revision >= 11) {
+ if (ccrev == 20) {
+ /* BCM5354 uses constant 25MHz clock */
+ baud_base = 25000000;
+ div = 48;
+ /* Set the override bit so we don't divide it */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ } else if ((ccrev >= 11) && (ccrev != 15)) {
/* Fixed ALP clock */
baud_base = 20000000;
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ /* FIXME: baud_base is different for devices with a PMU */
+ SSB_WARN_ON(1);
+ }
div = 1;
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
/* Set the override bit so we don't divide it */
chipco_write32(cc, SSB_CHIPCO_CORECTL,
- SSB_CHIPCO_CORECTL_UARTCLK0);
- } else if (cc->dev->id.revision >= 3) {
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLK0);
+ if (ccrev >= 21) {
+ /* Re-enable the UART clock. */
+ chipco_write32(cc, SSB_CHIPCO_CORECTL,
+ chipco_read32(cc, SSB_CHIPCO_CORECTL)
+ | SSB_CHIPCO_CORECTL_UARTCLKEN);
+ }
+ } else if (ccrev >= 3) {
/* Internal backplane clock */
baud_base = ssb_clockspeed(bus);
div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
@@ -406,7 +449,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
}
/* Clock source depends on strapping if UartClkOverride is unset */
- if ((cc->dev->id.revision > 0) &&
+ if ((ccrev > 0) &&
!(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
SSB_CHIPCO_CAP_UARTCLK_INT) {
@@ -428,7 +471,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
/* Offset changed at after rev 0 */
- if (cc->dev->id.revision == 0)
+ if (ccrev == 0)
uart_regs += (i * 8);
else
uart_regs += (i * 256);
diff --git a/drivers/ssb/driver_extif.c b/drivers/ssb/driver_extif.c
index fe55eb8b038..c3e1d3e6d61 100644
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -27,12 +27,14 @@ static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
ssb_write32(extif->dev, offset, value);
}
-static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
- u32 mask, u32 value)
+static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,
+ u32 mask, u32 value)
{
value &= mask;
value |= extif_read32(extif, offset) & ~mask;
extif_write32(extif, offset, value);
+
+ return value;
}
#ifdef CONFIG_SSB_SERIAL
@@ -110,20 +112,35 @@ void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
}
+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+ u32 ticks)
+{
+ extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
+}
+
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
{
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
}
-void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
{
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
mask, value);
}
-void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
{
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
mask, value);
}
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
+{
+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
+}
+
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
+{
+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
+}
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 2faaa906d5d..6d99a988005 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -11,6 +11,7 @@
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/ssb/ssb_embedded.h>
#include "ssb_private.h"
@@ -27,6 +28,18 @@ void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
ssb_write32(pc->dev, offset, value);
}
+static inline
+u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
+{
+ return ssb_read16(pc->dev, offset);
+}
+
+static inline
+void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
+{
+ ssb_write16(pc->dev, offset, value);
+}
+
/**************************************************
* Code for hostmode operation.
**************************************************/
@@ -66,6 +79,7 @@ int pcibios_plat_dev_init(struct pci_dev *d)
base = &ssb_pcicore_pcibus_iobase;
else
base = &ssb_pcicore_pcibus_membase;
+ res->flags |= IORESOURCE_PCI_FIXED;
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
@@ -88,10 +102,12 @@ int pcibios_plat_dev_init(struct pci_dev *d)
static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
{
+ u8 lat;
+
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
- ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
@@ -101,7 +117,10 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
/* Make sure our latency is high enough to handle the devices behind us */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
+ lat = 168;
+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
@@ -117,8 +136,10 @@ static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
u32 addr = 0;
u32 tmp;
- if (unlikely(pc->cardbusmode && dev > 1))
+ /* We do only have one cardbus device behind the bridge. */
+ if (pc->cardbusmode && (dev >= 1))
goto out;
+
if (bus == 0) {
/* Type 0 transaction */
if (unlikely(dev >= SSB_PCI_SLOT_MAX))
@@ -279,14 +300,14 @@ static struct resource ssb_pcicore_mem_resource = {
.name = "SSB PCIcore external memory",
.start = SSB_PCI_DMA,
.end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
};
static struct resource ssb_pcicore_io_resource = {
.name = "SSB PCIcore external I/O",
.start = 0x100,
.end = 0x7FF,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
};
static struct pci_controller ssb_pcicore_controller = {
@@ -318,7 +339,16 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
udelay(1); /* Assertion time demanded by the PCI standard */
- /*TODO cardbus mode */
+ if (pc->dev->bus->has_cardbus_slot) {
+ ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
+ pc->cardbusmode = 1;
+ /* GPIO 1 resets the bridge */
+ ssb_gpio_out(pc->dev->bus, 1, 1);
+ ssb_gpio_outen(pc->dev->bus, 1, 1);
+ pcicore_write16(pc, SSB_PCICORE_SPROM(0),
+ pcicore_read16(pc, SSB_PCICORE_SPROM(0))
+ | 0x0400);
+ }
/* 64MB I/O window */
pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
@@ -344,7 +374,8 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
/* Ok, ready to run, register it to the system.
* The following needs change, if we want to port hostmode
* to non-MIPS platform. */
- set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
+ ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
+ set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
mdelay(10);
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
new file mode 100644
index 00000000000..d3ade821555
--- /dev/null
+++ b/drivers/ssb/embedded.c
@@ -0,0 +1,132 @@
+/*
+ * Sonics Silicon Backplane
+ * Embedded systems support code
+ *
+ * Copyright 2005-2008, Broadcom Corporation
+ * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_embedded.h>
+
+#include "ssb_private.h"
+
+
+int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks)
+{
+ if (ssb_chipco_available(&bus->chipco)) {
+ ssb_chipco_watchdog_timer_set(&bus->chipco, ticks);
+ return 0;
+ }
+ if (ssb_extif_available(&bus->extif)) {
+ ssb_extif_watchdog_timer_set(&bus->extif, ticks);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_in(&bus->chipco, mask);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_in(&bus->extif, mask);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_in);
+
+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_out(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_out(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_out);
+
+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_outen(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_outen(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_outen);
+
+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_control(&bus->chipco, mask, value);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_control);
+
+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_intmask(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_intmask(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_intmask);
+
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&bus->gpio_lock, flags);
+ if (ssb_chipco_available(&bus->chipco))
+ res = ssb_chipco_gpio_polarity(&bus->chipco, mask, value);
+ else if (ssb_extif_available(&bus->extif))
+ res = ssb_extif_gpio_polarity(&bus->extif, mask, value);
+ else
+ SSB_WARN_ON(1);
+ spin_unlock_irqrestore(&bus->gpio_lock, flags);
+
+ return res;
+}
+EXPORT_SYMBOL(ssb_gpio_polarity);
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 9028ed5715a..bedb2b4ee9d 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -557,6 +557,7 @@ static int ssb_fetch_invariants(struct ssb_bus *bus,
goto out;
memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
+ bus->has_cardbus_slot = iv.has_cardbus_slot;
out:
return err;
}
@@ -569,6 +570,9 @@ static int ssb_bus_register(struct ssb_bus *bus,
spin_lock_init(&bus->bar_lock);
INIT_LIST_HEAD(&bus->list);
+#ifdef CONFIG_SSB_EMBEDDED
+ spin_lock_init(&bus->gpio_lock);
+#endif
/* Powerup the bus */
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-12 03:11:19 +0000