diff options
Diffstat (limited to 'drivers/ssb/driver_chipcommon.c')
| -rw-r--r-- | drivers/ssb/driver_chipcommon.c | 277 |
1 files changed, 244 insertions, 33 deletions
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 9681536163c..7cb7d2c8fd8 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -3,14 +3,17 @@ * Broadcom ChipCommon core driver * * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de> * * Licensed under the GNU/GPL. See COPYING for details. */ #include <linux/ssb/ssb.h> #include <linux/ssb/ssb_regs.h> +#include <linux/export.h> #include <linux/pci.h> +#include <linux/bcm47xx_wdt.h> #include "ssb_private.h" @@ -46,40 +49,66 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, if (!ccdev) return; bus = ccdev->bus; + + /* We support SLOW only on 6..9 */ + if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) + mode = SSB_CLKMODE_DYNAMIC; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) + return; /* PMU controls clockmode, separated function needed */ + SSB_WARN_ON(ccdev->id.revision >= 20); + /* chipcommon cores prior to rev6 don't support dynamic clock control */ if (ccdev->id.revision < 6) return; - /* chipcommon cores rev10 are a whole new ball game */ + + /* ChipCommon cores rev10+ need testing */ if (ccdev->id.revision >= 10) return; + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) return; switch (mode) { - case SSB_CLKMODE_SLOW: + case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); break; case SSB_CLKMODE_FAST: - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; - tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + if (ccdev->id.revision < 10) { + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + } else { + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | + SSB_CHIPCO_SYSCLKCTL_FORCEHT)); + /* udelay(150); TODO: not available in early init */ + } break; case SSB_CLKMODE_DYNAMIC: - tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; - tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; - if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) - tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; - chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); - - /* for dynamic control, we have to release our xtal_pu "force on" */ - if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) - ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); + if (ccdev->id.revision < 10) { + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != + SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) + tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + + /* For dynamic control, we have to release our xtal_pu + * "force on" */ + if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); + } else { + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & + ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); + } break; default: SSB_WARN_ON(1); @@ -209,6 +238,24 @@ static void chipco_powercontrol_init(struct ssb_chipcommon *cc) } } +/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */ +static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + + switch (bus->chip_id) { + case 0x4312: + case 0x4322: + case 0x4328: + return 7000; + case 0x4325: + /* TODO: */ + default: + return 15000; + } +} + +/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) { struct ssb_bus *bus = cc->dev->bus; @@ -218,6 +265,12 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) if (bus->bustype != SSB_BUSTYPE_PCI) return; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc); + return; + } + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) return; @@ -229,14 +282,94 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) cc->fast_pwrup_delay = tmp; } +static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc) +{ + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) + return ssb_pmu_get_alp_clock(cc); + + return 20000000; +} + +static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc) +{ + u32 nb; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + if (cc->dev->id.revision < 26) + nb = 16; + else + nb = (cc->dev->id.revision >= 37) ? 32 : 24; + } else { + nb = 28; + } + if (nb == 32) + return 0xffffffff; + else + return (1 << nb) - 1; +} + +u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) +{ + struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); + + if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) + return 0; + + return ssb_chipco_watchdog_timer_set(cc, ticks); +} + +u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) +{ + struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); + u32 ticks; + + if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) + return 0; + + ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms); + return ticks / cc->ticks_per_ms; +} + +static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + /* based on 32KHz ILP clock */ + return 32; + } else { + if (cc->dev->id.revision < 18) + return ssb_clockspeed(bus) / 1000; + else + return ssb_chipco_alp_clock(cc) / 1000; + } +} + void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + + spin_lock_init(&cc->gpio_lock); + + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); + ssb_dbg("chipcommon status is 0x%x\n", cc->status); + + if (cc->dev->id.revision >= 20) { + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); + chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); + } + ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); calc_fast_powerup_delay(cc); + + if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) { + cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc); + cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; + } } void ssb_chipco_suspend(struct ssb_chipcommon *cc) @@ -335,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc, } /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ -void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) +u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) { - /* instant NMI */ - chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); + u32 maxt; + enum ssb_clkmode clkmode; + + maxt = ssb_chipco_watchdog_get_max_timer(cc); + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + if (ticks == 1) + ticks = 2; + else if (ticks > maxt) + ticks = maxt; + chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks); + } else { + clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC; + ssb_chipco_set_clockmode(cc, clkmode); + if (ticks > maxt) + ticks = maxt; + /* instant NMI */ + chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); + } + return ticks; } void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value) @@ -358,27 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask) u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; } u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; } u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value) { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; } +EXPORT_SYMBOL(ssb_chipco_gpio_control); u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; } u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value) { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; +} + +u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + if (cc->dev->id.revision < 20) + return 0xffffffff; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; +} + +u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + if (cc->dev->id.revision < 20) + return 0xffffffff; + + spin_lock_irqsave(&cc->gpio_lock, flags); + res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value); + spin_unlock_irqrestore(&cc->gpio_lock, flags); + + return res; } #ifdef CONFIG_SSB_SERIAL @@ -412,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, chipco_read32(cc, SSB_CHIPCO_CORECTL) | SSB_CHIPCO_CORECTL_UARTCLK0); } else if ((ccrev >= 11) && (ccrev != 15)) { - /* Fixed ALP clock */ - baud_base = 20000000; - if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { - /* FIXME: baud_base is different for devices with a PMU */ - SSB_WARN_ON(1); - } + baud_base = ssb_chipco_alp_clock(cc); div = 1; if (ccrev >= 21) { /* Turn off UART clock before switching clocksource. */ |