diff options
Diffstat (limited to 'drivers/spi/spi-au1550.c')
| -rw-r--r-- | drivers/spi/spi-au1550.c | 44 |
1 files changed, 16 insertions, 28 deletions
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 1d00d9b397d..67375a11d4b 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -55,8 +55,6 @@ struct au1550_spi { volatile psc_spi_t __iomem *regs; int irq; - unsigned freq_max; - unsigned freq_min; unsigned len; unsigned tx_count; @@ -248,11 +246,8 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) hz = t->speed_hz; } - if (hz > spi->max_speed_hz || hz > hw->freq_max || hz < hw->freq_min) { - dev_err(&spi->dev, "setupxfer: clock rate=%d out of range\n", - hz); + if (!hz) return -EINVAL; - } au1550_spi_bits_handlers_set(hw, spi->bits_per_word); @@ -287,23 +282,6 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) return 0; } -static int au1550_spi_setup(struct spi_device *spi) -{ - struct au1550_spi *hw = spi_master_get_devdata(spi->master); - - if (spi->max_speed_hz == 0) - spi->max_speed_hz = hw->freq_max; - if (spi->max_speed_hz > hw->freq_max - || spi->max_speed_hz < hw->freq_min) - return -EINVAL; - /* - * NOTE: cannot change speed and other hw settings immediately, - * otherwise sharing of spi bus is not possible, - * so do not call setupxfer(spi, NULL) here - */ - return 0; -} - /* * for dma spi transfers, we have to setup rx channel, otherwise there is * no reliable way how to recognize that spi transfer is done @@ -775,7 +753,7 @@ static int au1550_spi_probe(struct platform_device *pdev) hw = spi_master_get_devdata(master); - hw->master = spi_master_get(master); + hw->master = master; hw->pdata = dev_get_platdata(&pdev->dev); hw->dev = &pdev->dev; @@ -838,7 +816,6 @@ static int au1550_spi_probe(struct platform_device *pdev) hw->bitbang.master = hw->master; hw->bitbang.setup_transfer = au1550_spi_setupxfer; hw->bitbang.chipselect = au1550_spi_chipsel; - hw->bitbang.master->setup = au1550_spi_setup; hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; if (hw->usedma) { @@ -909,8 +886,9 @@ static int au1550_spi_probe(struct platform_device *pdev) { int min_div = (2 << 0) * (2 * (4 + 1)); int max_div = (2 << 3) * (2 * (63 + 1)); - hw->freq_max = hw->pdata->mainclk_hz / min_div; - hw->freq_min = hw->pdata->mainclk_hz / (max_div + 1) + 1; + master->max_speed_hz = hw->pdata->mainclk_hz / min_div; + master->min_speed_hz = + hw->pdata->mainclk_hz / (max_div + 1) + 1; } au1550_spi_setup_psc_as_spi(hw); @@ -985,6 +963,7 @@ static int au1550_spi_remove(struct platform_device *pdev) MODULE_ALIAS("platform:au1550-spi"); static struct platform_driver au1550_spi_drv = { + .probe = au1550_spi_probe, .remove = au1550_spi_remove, .driver = { .name = "au1550-spi", @@ -998,13 +977,22 @@ static int __init au1550_spi_init(void) * create memory device with 8 bits dev_devwidth * needed for proper byte ordering to spi fifo */ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1550: + case ALCHEMY_CPU_AU1200: + case ALCHEMY_CPU_AU1300: + break; + default: + return -ENODEV; + } + if (usedma) { ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); if (!ddma_memid) printk(KERN_ERR "au1550-spi: cannot add memory" "dbdma device\n"); } - return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe); + return platform_driver_register(&au1550_spi_drv); } module_init(au1550_spi_init); |