diff options
Diffstat (limited to 'drivers/serial/serial_cs.c')
| -rw-r--r-- | drivers/serial/serial_cs.c | 981 |
1 files changed, 0 insertions, 981 deletions
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c deleted file mode 100644 index 164d2a42eb5..00000000000 --- a/drivers/serial/serial_cs.c +++ /dev/null @@ -1,981 +0,0 @@ -/*====================================================================== - - A driver for PCMCIA serial devices - - serial_cs.c 1.134 2002/05/04 05:48:53 - - The contents of this file are subject to the Mozilla Public - License Version 1.1 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of - the License at http://www.mozilla.org/MPL/ - - Software distributed under the License is distributed on an "AS - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - implied. See the License for the specific language governing - rights and limitations under the License. - - The initial developer of the original code is David A. Hinds - <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - - Alternatively, the contents of this file may be used under the - terms of the GNU General Public License version 2 (the "GPL"), in which - case the provisions of the GPL are applicable instead of the - above. If you wish to allow the use of your version of this file - only under the terms of the GPL and not to allow others to use - your version of this file under the MPL, indicate your decision - by deleting the provisions above and replace them with the notice - and other provisions required by the GPL. If you do not delete - the provisions above, a recipient may use your version of this - file under either the MPL or the GPL. - -======================================================================*/ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/major.h> -#include <asm/io.h> -#include <asm/system.h> - -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> -#include <pcmcia/cisreg.h> - -#include "8250.h" - -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0644); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; -#else -#define DEBUG(n, args...) -#endif - -/*====================================================================*/ - -/* Parameters that can be set with 'insmod' */ - -/* Enable the speaker? */ -static int do_sound = 1; -/* Skip strict UART tests? */ -static int buggy_uart; - -module_param(do_sound, int, 0444); -module_param(buggy_uart, int, 0444); - -/*====================================================================*/ - -/* Table of multi-port card ID's */ - -struct serial_quirk { - unsigned int manfid; - unsigned int prodid; - int multi; /* 1 = multifunction, > 1 = # ports */ - void (*config)(struct pcmcia_device *); - void (*setup)(struct pcmcia_device *, struct uart_port *); - void (*wakeup)(struct pcmcia_device *); - int (*post)(struct pcmcia_device *); -}; - -struct serial_info { - struct pcmcia_device *p_dev; - int ndev; - int multi; - int slave; - int manfid; - int prodid; - int c950ctrl; - dev_node_t node[4]; - int line[4]; - const struct serial_quirk *quirk; -}; - -struct serial_cfg_mem { - tuple_t tuple; - cisparse_t parse; - u_char buf[256]; -}; - -/* - * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" - * manfid 0x0160, 0x0104 - * This card appears to have a 14.7456MHz clock. - */ -static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) -{ - port->uartclk = 14745600; -} - -static int quirk_post_ibm(struct pcmcia_device *link) -{ - conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; - int last_ret, last_fn; - - last_ret = pcmcia_access_configuration_register(link, ®); - if (last_ret) { - last_fn = AccessConfigurationRegister; - goto cs_failed; - } - reg.Action = CS_WRITE; - reg.Value = reg.Value | 1; - last_ret = pcmcia_access_configuration_register(link, ®); - if (last_ret) { - last_fn = AccessConfigurationRegister; - goto cs_failed; - } - return 0; - - cs_failed: - cs_error(link, last_fn, last_ret); - return -ENODEV; -} - -/* - * Nokia cards are not really multiport cards. Shouldn't this - * be handled by setting the quirk entry .multi = 0 | 1 ? - */ -static void quirk_config_nokia(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi > 1) - info->multi = 1; -} - -static void quirk_wakeup_oxsemi(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - outb(12, info->c950ctrl + 1); -} - -/* request_region? oxsemi branch does no request_region too... */ -/* - * This sequence is needed to properly initialize MC45 attached to OXCF950. - * I tried decreasing these msleep()s, but it worked properly (survived - * 1000 stop/start operations) with these timeouts (or bigger). - */ -static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - unsigned int ctrl = info->c950ctrl; - - outb(0xA, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(300); - outb(0xC, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(200); - outb(0xF, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(100); - outb(0xC, ctrl + 1); -} - -/* - * Socket Dual IO: this enables irq's for second port - */ -static void quirk_config_socket(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi) { - link->conf.Present |= PRESENT_EXT_STATUS; - link->conf.ExtStatus = ESR_REQ_ATTN_ENA; - } -} - -static const struct serial_quirk quirks[] = { - { - .manfid = 0x0160, - .prodid = 0x0104, - .multi = -1, - .setup = quirk_setup_brainboxes_0104, - }, { - .manfid = MANFID_IBM, - .prodid = ~0, - .multi = -1, - .post = quirk_post_ibm, - }, { - .manfid = MANFID_INTEL, - .prodid = PRODID_INTEL_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_NATINST, - .prodid = PRODID_NATINST_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_NOKIA, - .prodid = ~0, - .multi = -1, - .config = quirk_config_nokia, - }, { - .manfid = MANFID_OMEGA, - .prodid = PRODID_OMEGA_QSP_100, - .multi = 4, - }, { - .manfid = MANFID_OXSEMI, - .prodid = ~0, - .multi = -1, - .wakeup = quirk_wakeup_oxsemi, - }, { - .manfid = MANFID_POSSIO, - .prodid = PRODID_POSSIO_GCC, - .multi = -1, - .wakeup = quirk_wakeup_possio_gcc, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_D1, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_G, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_SOCKET, - .prodid = PRODID_SOCKET_DUAL_RS232, - .multi = 2, - .config = quirk_config_socket, - }, { - .manfid = MANFID_SOCKET, - .prodid = ~0, - .multi = -1, - .config = quirk_config_socket, - } -}; - - -static int serial_config(struct pcmcia_device * link); - - -/*====================================================================== - - After a card is removed, serial_remove() will unregister - the serial device(s), and release the PCMCIA configuration. - -======================================================================*/ - -static void serial_remove(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - DEBUG(0, "serial_release(0x%p)\n", link); - - /* - * Recheck to see if the device is still configured. - */ - for (i = 0; i < info->ndev; i++) - serial8250_unregister_port(info->line[i]); - - info->p_dev->dev_node = NULL; - - if (!info->slave) - pcmcia_disable_device(link); -} - -static int serial_suspend(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_suspend_port(info->line[i]); - - return 0; -} - -static int serial_resume(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_resume_port(info->line[i]); - - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - return 0; -} - -/*====================================================================== - - serial_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - -static int serial_probe(struct pcmcia_device *link) -{ - struct serial_info *info; - - DEBUG(0, "serial_attach()\n"); - - /* Create new serial device */ - info = kzalloc(sizeof (*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - info->p_dev = link; - link->priv = info; - - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->conf.Attributes = CONF_ENABLE_IRQ; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - link->conf.IntType = INT_MEMORY_AND_IO; - - return serial_config(link); -} - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - -static void serial_detach(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - DEBUG(0, "serial_detach(0x%p)\n", link); - - /* - * Ensure any outstanding scheduled tasks are completed. - */ - flush_scheduled_work(); - - /* - * Ensure that the ports have been released. - */ - serial_remove(link); - - /* free bits */ - kfree(info); -} - -/*====================================================================*/ - -static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, - unsigned int iobase, int irq) -{ - struct uart_port port; - int line; - - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; - port.irq = irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &handle_to_dev(handle); - if (buggy_uart) - port.flags |= UPF_BUGGY_UART; - - if (info->quirk && info->quirk->setup) - info->quirk->setup(handle, &port); - - line = serial8250_register_port(&port); - if (line < 0) { - printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " - "0x%04lx, irq %d failed\n", (u_long)iobase, irq); - return -EINVAL; - } - - info->line[info->ndev] = line; - sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); - info->node[info->ndev].major = TTY_MAJOR; - info->node[info->ndev].minor = 0x40 + line; - if (info->ndev > 0) - info->node[info->ndev - 1].next = &info->node[info->ndev]; - info->ndev++; - - return 0; -} - -/*====================================================================*/ - -static int -first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) -{ - int i; - i = pcmcia_get_first_tuple(handle, tuple); - if (i != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int -next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) -{ - int i; - i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - return pcmcia_parse_tuple(handle, tuple, parse); -} - -/*====================================================================*/ - -static int simple_config(struct pcmcia_device *link) -{ - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - static const int size_table[2] = { 8, 16 }; - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - config_info_t config; - int i, j, try; - int s; - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - - /* If the card is already configured, look up the port and irq */ - i = pcmcia_get_configuration_info(link, &config); - if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { - unsigned int port = 0; - if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { - port = config.BasePort2; - info->slave = 1; - } else if ((info->manfid == MANFID_OSITECH) && - (config.NumPorts1 == 0x40)) { - port = config.BasePort1 + 0x28; - info->slave = 1; - } - if (info->slave) { - kfree(cfg_mem); - return setup_serial(link, info, port, config.AssignedIRQ); - } - } - - /* First pass: look for a config entry that looks normal. */ - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (s = 0; s < 2; s++) { - for (try = 0; try < 2; try++) { - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && - (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, tuple, parse); - } - } - } - /* Second pass: try to find an entry that isn't picky about - its base address, then try to grab any standard serial port - address, and finally try to get any free port. */ - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && - ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, tuple, parse); - } - - found_port: - if (i != CS_SUCCESS) { - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - cs_error(link, RequestIO, i); - kfree(cfg_mem); - return -1; - } - - i = pcmcia_request_irq(link, &link->irq); - if (i != CS_SUCCESS) { - cs_error(link, RequestIRQ, i); - link->irq.AssignedIRQ = 0; - } - if (info->multi && (info->manfid == MANFID_3COM)) - link->conf.ConfigIndex &= ~(0x08); - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_request_configuration(link, &link->conf); - if (i != CS_SUCCESS) { - cs_error(link, RequestConfiguration, i); - kfree(cfg_mem); - return -1; - } - kfree(cfg_mem); - return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); -} - -static int multi_config(struct pcmcia_device * link) -{ - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - int i, rc, base2 = 0; - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - - /* First, look for a generic full-sized window */ - link->io.NumPorts1 = info->multi * 8; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && - (cf->io.win[0].len > 8)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort1 + 8; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); - } - - /* If that didn't work, look for two windows */ - if (i != CS_SUCCESS) { - link->io.NumPorts1 = link->io.NumPorts2 = 8; - info->multi = 2; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.BasePort2 = cf->io.win[1].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort2; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); - } - } - - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - rc = -1; - goto free_cfg_mem; - } - - i = pcmcia_request_irq(link, &link->irq); - if (i != CS_SUCCESS) { - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - cs_error(link, RequestIRQ, i); - link->irq.AssignedIRQ = 0; - } - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_request_configuration(link, &link->conf); - if (i != CS_SUCCESS) { - cs_error(link, RequestConfiguration, i); - rc = -1; - goto free_cfg_mem; - } - - /* The Oxford Semiconductor OXCF950 cards are in fact single-port: - * 8 registers are for the UART, the others are extra registers. - * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. - */ - if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && - info->prodid == PRODID_POSSIO_GCC)) { - int err; - - if (cf->index == 1 || cf->index == 3) { - err = setup_serial(link, info, base2, - link->irq.AssignedIRQ); - base2 = link->io.BasePort1; - } else { - err = setup_serial(link, info, link->io.BasePort1, - link->irq.AssignedIRQ); - } - info->c950ctrl = base2; - - /* - * FIXME: We really should wake up the port prior to - * handing it over to the serial layer. - */ - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - rc = 0; - goto free_cfg_mem; - } - - setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); - for (i = 0; i < info->multi - 1; i++) - setup_serial(link, info, base2 + (8 * i), - link->irq.AssignedIRQ); - rc = 0; -free_cfg_mem: - kfree(cfg_mem); - return rc; -} - -/*====================================================================== - - serial_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - serial device available to the system. - -======================================================================*/ - -static int serial_config(struct pcmcia_device * link) -{ - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - int i; - - DEBUG(0, "serial_config(0x%p)\n", link); - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - goto failed; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - - /* Is this a compliant multifunction card? */ - tuple->DesiredTuple = CISTPL_LONGLINK_MFC; - tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; - info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS); - - /* Is this a multiport card? */ - tuple->DesiredTuple = CISTPL_MANFID; - info->manfid = link->manf_id; - info->prodid = link->card_id; - - for (i = 0; i < ARRAY_SIZE(quirks); i++) - if ((quirks[i].manfid == ~0 || - quirks[i].manfid == info->manfid) && - (quirks[i].prodid == ~0 || - quirks[i].prodid == info->prodid)) { - info->quirk = &quirks[i]; - break; - } - - /* Another check for dual-serial cards: look for either serial or - multifunction cards that ask for appropriate IO port ranges */ - tuple->DesiredTuple = CISTPL_FUNCID; - if ((info->multi == 0) && - (link->has_func_id) && - ((link->func_id == CISTPL_FUNCID_MULTI) || - (link->func_id == CISTPL_FUNCID_SERIAL))) { - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - if (first_tuple(link, tuple, parse) == CS_SUCCESS) { - if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) - info->multi = cf->io.win[0].len >> 3; - if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && - (cf->io.win[1].len == 8)) - info->multi = 2; - } - } - - /* - * Apply any multi-port quirk. - */ - if (info->quirk && info->quirk->multi != -1) - info->multi = info->quirk->multi; - - if (info->multi > 1) - multi_config(link); - else - simple_config(link); - - if (info->ndev == 0) - goto failed; - - /* - * Apply any post-init quirk. FIXME: This should really happen - * before we register the port, since it might already be in use. - */ - if (info->quirk && info->quirk->post) - if (info->quirk->post(link)) - goto failed; - - link->dev_node = &info->node[0]; - kfree(cfg_mem); - return 0; - - failed: - serial_remove(link); - kfree(cfg_mem); - return -ENODEV; -} - -static struct pcmcia_device_id serial_ids[] = { - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), - PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), - PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), - PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), - PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), - PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), - PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), - PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), - PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), - PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), - PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), - PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), - PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), - PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), - PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), - PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), - PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), - PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), - PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ - PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), - PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), - /* too generic */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ - PCMCIA_DEVICE_FUNC_ID(2), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, serial_ids); - -static struct pcmcia_driver serial_cs_driver = { - .owner = THIS_MODULE, - .drv = { - .name = "serial_cs", - }, - .probe = serial_probe, - .remove = serial_detach, - .id_table = serial_ids, - .suspend = serial_suspend, - .resume = serial_resume, -}; - -static int __init init_serial_cs(void) -{ - return pcmcia_register_driver(&serial_cs_driver); -} - -static void __exit exit_serial_cs(void) -{ - pcmcia_unregister_driver(&serial_cs_driver); -} - -module_init(init_serial_cs); -module_exit(exit_serial_cs); - -MODULE_LICENSE("GPL"); |