diff options
Diffstat (limited to 'drivers/serial/max3107-aava.c')
| -rw-r--r-- | drivers/serial/max3107-aava.c | 344 |
1 files changed, 0 insertions, 344 deletions
diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c deleted file mode 100644 index a1fe304f2f5..00000000000 --- a/drivers/serial/max3107-aava.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin <chripell@evolware.org> - * and max3110.c - * by Feng Tang <feng.tang@intel.com> - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/spi/spi.h> -#include <linux/freezer.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/sfi.h> -#include <asm/mrst.h> -#include "max3107.h" - -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, -}; - -/** - * max3107_aava_reset - reset on AAVA systems - * @spi: The SPI device we are probing - * - * Reset the device ready for probing. - */ - -static int max3107_aava_reset(struct spi_device *spi) -{ - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - return 0; -} - -static int max3107_aava_configure(struct max3107_port *s) -{ - int retval; - - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = s->spi->modalias; - s->chip.dev = &s->spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; - } - - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - return 0; -} - -#if 0 -/* This will get enabled once we have the board stuff merged for this - specific case */ - -static const struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static void max3107_aava_init(struct max3107_port *s) -{ - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -} -#endif - -static int __devexit max3107_aava_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&spi->dev, "Removing GPIO chip failed\n"); - - /* Then do the default remove */ - return max3107_remove(spi); -} - -/* Platform data */ -static struct max3107_plat aava_plat_data = { - .loopback = 0, - .ext_clk = 1, -/* .init = max3107_aava_init, */ - .configure = max3107_aava_configure, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -static int __devinit max3107_probe_aava(struct spi_device *spi) -{ - int err = max3107_aava_reset(spi); - if (err < 0) - return err; - return max3107_probe(spi, &aava_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "aava-max3107", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = max3107_probe_aava, - .remove = __devexit_p(max3107_aava_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); -MODULE_LICENSE("GPL v2"); |