diff options
Diffstat (limited to 'drivers/serial/imx.c')
| -rw-r--r-- | drivers/serial/imx.c | 1126 |
1 files changed, 0 insertions, 1126 deletions
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c deleted file mode 100644 index 56af1f566a4..00000000000 --- a/drivers/serial/imx.c +++ /dev/null @@ -1,1126 +0,0 @@ -/* - * linux/drivers/serial/imx.c - * - * Driver for Motorola IMX serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Author: Sascha Hauer <sascha@saschahauer.de> - * Copyright (C) 2004 Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * [29-Mar-2005] Mike Lee - * Added hardware handshake - */ - -#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/platform_device.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/arch/imx-uart.h> - -/* Register definitions */ -#define URXD0 0x0 /* Receiver Register */ -#define URTX0 0x40 /* Transmitter Register */ -#define UCR1 0x80 /* Control Register 1 */ -#define UCR2 0x84 /* Control Register 2 */ -#define UCR3 0x88 /* Control Register 3 */ -#define UCR4 0x8c /* Control Register 4 */ -#define UFCR 0x90 /* FIFO Control Register */ -#define USR1 0x94 /* Status Register 1 */ -#define USR2 0x98 /* Status Register 2 */ -#define UESC 0x9c /* Escape Character Register */ -#define UTIM 0xa0 /* Escape Timer Register */ -#define UBIR 0xa4 /* BRM Incremental Register */ -#define UBMR 0xa8 /* BRM Modulator Register */ -#define UBRC 0xac /* Baud Rate Count Register */ -#define BIPR1 0xb0 /* Incremental Preset Register 1 */ -#define BIPR2 0xb4 /* Incremental Preset Register 2 */ -#define BIPR3 0xb8 /* Incremental Preset Register 3 */ -#define BIPR4 0xbc /* Incremental Preset Register 4 */ -#define BMPR1 0xc0 /* BRM Modulator Register 1 */ -#define BMPR2 0xc4 /* BRM Modulator Register 2 */ -#define BMPR3 0xc8 /* BRM Modulator Register 3 */ -#define BMPR4 0xcc /* BRM Modulator Register 4 */ -#define UTS 0xd0 /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_IMX_MAJOR 204 -#define MINOR_START 41 - -#define NR_PORTS 2 - -#define IMX_ISR_PASS_LIMIT 256 - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x100 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -#define DRIVER_NAME "IMX-uart" - -struct imx_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; - int txirq,rxirq,rtsirq; - int have_rtscts:1; -}; - -/* - * Handle any change of modem status signal since we were last called. - */ -static void imx_mctrl_check(struct imx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.info->delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void imx_timeout(unsigned long data) -{ - struct imx_port *sport = (struct imx_port *)data; - unsigned long flags; - - if (sport->port.info) { - spin_lock_irqsave(&sport->port.lock, flags); - imx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR1); - writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_rx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2); - writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void imx_enable_ms(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static inline void imx_transmit_buffer(struct imx_port *sport) -{ - struct circ_buf *xmit = &sport->port.info->xmit; - - while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_empty(xmit)) - imx_stop_tx(&sport->port); -} - -/* - * interrupts disabled on entry - */ -static void imx_start_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR1); - writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); - - if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) - imx_transmit_buffer(sport); -} - -static irqreturn_t imx_rtsint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock, flags); - - writel(USR1_RTSD, sport->port.membase + USR1); - uart_handle_cts_change(&sport->port, !!val); - wake_up_interruptible(&sport->port.info->delta_msr_wait); - - spin_unlock_irqrestore(&sport->port.lock, flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_txint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - struct circ_buf *xmit = &sport->port.info->xmit; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock,flags); - if (sport->port.x_char) - { - /* Send next char */ - writel(sport->port.x_char, sport->port.membase + URTX0); - goto out; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - imx_stop_tx(&sport->port); - goto out; - } - - imx_transmit_buffer(sport); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_rxint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int rx,flg,ignored = 0; - struct tty_struct *tty = sport->port.info->tty; - unsigned long flags, temp; - - rx = readl(sport->port.membase + URXD0); - spin_lock_irqsave(&sport->port.lock,flags); - - do { - flg = TTY_NORMAL; - sport->port.icount.rx++; - - temp = readl(sport->port.membase + USR2); - if( temp & USR2_BRCD ) { - writel(temp | USR2_BRCD, sport->port.membase + USR2); - if(uart_handle_break(&sport->port)) - goto ignore_char; - } - - if (uart_handle_sysrq_char - (&sport->port, (unsigned char)rx)) - goto ignore_char; - - if( rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) - goto handle_error; - - error_return: - tty_insert_flip_char(tty, rx, flg); - - ignore_char: - rx = readl(sport->port.membase + URXD0); - } while(rx & URXD_CHARRDY); - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - tty_flip_buffer_push(tty); - return IRQ_HANDLED; - -handle_error: - if (rx & URXD_PRERR) - sport->port.icount.parity++; - else if (rx & URXD_FRMERR) - sport->port.icount.frame++; - if (rx & URXD_OVRRUN) - sport->port.icount.overrun++; - - if (rx & sport->port.ignore_status_mask) { - if (++ignored > 100) - goto out; - goto ignore_char; - } - - rx &= sport->port.read_status_mask; - - if (rx & URXD_PRERR) - flg = TTY_PARITY; - else if (rx & URXD_FRMERR) - flg = TTY_FRAME; - if (rx & URXD_OVRRUN) - flg = TTY_OVERRUN; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - goto error_return; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int imx_tx_empty(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; -} - -/* - * We have a modem side uart, so the meanings of RTS and CTS are inverted. - */ -static unsigned int imx_get_mctrl(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; - - if (readl(sport->port.membase + USR1) & USR1_RTSS) - tmp |= TIOCM_CTS; - - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; - - return tmp; -} - -static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - - if (mctrl & TIOCM_RTS) - temp |= UCR2_CTS; - - writel(temp, sport->port.membase + UCR2); -} - -/* - * Interrupts always disabled. - */ -static void imx_break_ctl(struct uart_port *port, int break_state) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags, temp; - - spin_lock_irqsave(&sport->port.lock, flags); - - temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; - - if ( break_state != 0 ) - temp |= UCR1_SNDBRK; - - writel(temp, sport->port.membase + UCR1); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -#define TXTL 2 /* reset default */ -#define RXTL 1 /* reset default */ - -static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) -{ - unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - if(ufcr_rfdiv >= 7) - ufcr_rfdiv = 6; - else - ufcr_rfdiv = 6 - ufcr_rfdiv; - - val |= UFCR_RFDIV & (ufcr_rfdiv << 7); - - writel(val, sport->port.membase + UFCR); - - return 0; -} - -static int imx_startup(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - int retval; - unsigned long flags, temp; - - imx_setup_ufcr(sport, 0); - - /* disable the DREN bit (Data Ready interrupt enable) before - * requesting IRQs - */ - temp = readl(sport->port.membase + UCR4); - writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->rxirq, imx_rxint, 0, - DRIVER_NAME, sport); - if (retval) goto error_out1; - - retval = request_irq(sport->txirq, imx_txint, 0, - DRIVER_NAME, sport); - if (retval) goto error_out2; - - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < IMX_IRQS) ? 0 : - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) goto error_out3; - - /* - * Finally, clear and enable interrupts - */ - writel(USR1_RTSD, sport->port.membase + USR1); - - temp = readl(sport->port.membase + UCR1); - temp |= (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR2); - temp |= (UCR2_RXEN | UCR2_TXEN); - writel(temp, sport->port.membase + UCR2); - - /* - * Enable modem status interrupts - */ - spin_lock_irqsave(&sport->port.lock,flags); - imx_enable_ms(&sport->port); - spin_unlock_irqrestore(&sport->port.lock,flags); - - return 0; - -error_out3: - free_irq(sport->txirq, sport); -error_out2: - free_irq(sport->rxirq, sport); -error_out1: - return retval; -} - -static void imx_shutdown(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Free the interrupts - */ - free_irq(sport->rtsirq, sport); - free_irq(sport->txirq, sport); - free_irq(sport->rxirq, sport); - - /* - * Disable all interrupts, port and break condition. - */ - - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); - writel(temp, sport->port.membase + UCR1); -} - -static void -imx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags; - unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * If we don't support modem control lines, don't allow - * these to be set. - */ - if (0) { - termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); - termios->c_cflag |= CLOCAL; - } - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; - else - ucr2 = UCR2_SRST | UCR2_IRTS; - - if (termios->c_cflag & CRTSCTS) { - if( sport->have_rtscts ) { - ucr2 &= ~UCR2_IRTS; - ucr2 |= UCR2_CTSC; - } else { - termios->c_cflag &= ~CRTSCTS; - } - } - - if (termios->c_cflag & CSTOPB) - ucr2 |= UCR2_STPB; - if (termios->c_cflag & PARENB) { - ucr2 |= UCR2_PREN; - if (termios->c_cflag & PARODD) - ucr2 |= UCR2_PROE; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = 0; - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= URXD_BRK; - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_PRERR; - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= URXD_BRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_OVRRUN; - } - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ucr1 = readl(sport->port.membase + UCR1); - writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), - sport->port.membase + UCR1); - - while ( !(readl(sport->port.membase + USR2) & USR2_TXDC)) - barrier(); - - /* then, disable everything */ - old_txrxen = readl(sport->port.membase + UCR2); - writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN), - sport->port.membase + UCR2); - old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - - /* set the baud rate. We assume uartclk = 16 MHz - * - * baud * 16 UBIR - 1 - * --------- = -------- - * uartclk UBMR - 1 - */ - writel((baud / 100) - 1, sport->port.membase + UBIR); - writel(10000 - 1, sport->port.membase + UBMR); - - writel(old_ucr1, sport->port.membase + UCR1); - - /* set the parity, stop bits and data size */ - writel(ucr2 | old_txrxen, sport->port.membase + UCR2); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - imx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *imx_type(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return sport->port.type == PORT_IMX ? "IMX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void imx_release_port(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int imx_request_port(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "imx-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void imx_config_port(struct uart_port *port, int flags) -{ - struct imx_port *sport = (struct imx_port *)port; - - if (flags & UART_CONFIG_TYPE && - imx_request_port(&sport->port) == 0) - sport->port.type = PORT_IMX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_IMX and PORT_UNKNOWN - */ -static int -imx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct imx_port *sport = (struct imx_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != UPIO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops imx_pops = { - .tx_empty = imx_tx_empty, - .set_mctrl = imx_set_mctrl, - .get_mctrl = imx_get_mctrl, - .stop_tx = imx_stop_tx, - .start_tx = imx_start_tx, - .stop_rx = imx_stop_rx, - .enable_ms = imx_enable_ms, - .break_ctl = imx_break_ctl, - .startup = imx_startup, - .shutdown = imx_shutdown, - .set_termios = imx_set_termios, - .type = imx_type, - .release_port = imx_release_port, - .request_port = imx_request_port, - .config_port = imx_config_port, - .verify_port = imx_verify_port, -}; - -static struct imx_port imx_ports[] = { - { - .txirq = UART1_MINT_TX, - .rxirq = UART1_MINT_RX, - .rtsirq = UART1_MINT_RTS, - .port = { - .type = PORT_IMX, - .iotype = UPIO_MEM, - .membase = (void *)IMX_UART1_BASE, - .mapbase = IMX_UART1_BASE, /* FIXME */ - .irq = UART1_MINT_RX, - .uartclk = 16000000, - .fifosize = 32, - .flags = UPF_BOOT_AUTOCONF, - .ops = &imx_pops, - .line = 0, - }, - }, { - .txirq = UART2_MINT_TX, - .rxirq = UART2_MINT_RX, - .rtsirq = UART2_MINT_RTS, - .port = { - .type = PORT_IMX, - .iotype = UPIO_MEM, - .membase = (void *)IMX_UART2_BASE, - .mapbase = IMX_UART2_BASE, /* FIXME */ - .irq = UART2_MINT_RX, - .uartclk = 16000000, - .fifosize = 32, - .flags = UPF_BOOT_AUTOCONF, - .ops = &imx_pops, - .line = 1, - }, - } -}; - -/* - * Setup the IMX serial ports. - * Note also that we support "console=ttySMXx" where "x" is either 0 or 1. - * Which serial port this ends up being depends on the machine you're - * running this kernel on. I'm not convinced that this is a good idea, - * but that's the way it traditionally works. - * - */ -static void __init imx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < ARRAY_SIZE(imx_ports); i++) { - init_timer(&imx_ports[i].timer); - imx_ports[i].timer.function = imx_timeout; - imx_ports[i].timer.data = (unsigned long)&imx_ports[i]; - } -} - -#ifdef CONFIG_SERIAL_IMX_CONSOLE -static void imx_console_putchar(struct uart_port *port, int ch) -{ - struct imx_port *sport = (struct imx_port *)port; - - while (readl(sport->port.membase + UTS) & UTS_TXFULL) - barrier(); - - writel(ch, sport->port.membase + URTX0); -} - -/* - * Interrupts are disabled on entering - */ -static void -imx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct imx_port *sport = &imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2; - - /* - * First, save UCR1/2 and then disable interrupts - */ - old_ucr1 = readl(sport->port.membase + UCR1); - old_ucr2 = readl(sport->port.membase + UCR2); - - writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) & - ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), - sport->port.membase + UCR1); - - writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); - - uart_console_write(&sport->port, s, count, imx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore UCR1/2 - */ - while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); - - writel(old_ucr1, sport->port.membase + UCR1); - writel(old_ucr2, sport->port.membase + UCR2); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -imx_console_get_options(struct imx_port *sport, int *baud, - int *parity, int *bits) -{ - - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { - /* ok, the port was enabled */ - unsigned int ucr2, ubir,ubmr, uartclk; - unsigned int baud_raw; - unsigned int ucfr_rfdiv; - - ucr2 = readl(sport->port.membase + UCR2); - - *parity = 'n'; - if (ucr2 & UCR2_PREN) { - if (ucr2 & UCR2_PROE) - *parity = 'o'; - else - *parity = 'e'; - } - - if (ucr2 & UCR2_WS) - *bits = 8; - else - *bits = 7; - - ubir = readl(sport->port.membase + UBIR) & 0xffff; - ubmr = readl(sport->port.membase + UBMR) & 0xffff; - - ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; - if (ucfr_rfdiv == 6) - ucfr_rfdiv = 7; - else - ucfr_rfdiv = 6 - ucfr_rfdiv; - - uartclk = imx_get_perclk1(); - uartclk /= ucfr_rfdiv; - - { /* - * The next code provides exact computation of - * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) - * without need of float support or long long division, - * which would be required to prevent 32bit arithmetic overflow - */ - unsigned int mul = ubir + 1; - unsigned int div = 16 * (ubmr + 1); - unsigned int rem = uartclk % div; - - baud_raw = (uartclk / div) * mul; - baud_raw += (rem * mul + div / 2) / div; - *baud = (baud_raw + 50) / 100 * 100; - } - - if(*baud != baud_raw) - printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n", - baud_raw, *baud); - } -} - -static int __init -imx_console_setup(struct console *co, char *options) -{ - struct imx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) - co->index = 0; - sport = &imx_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - imx_console_get_options(sport, &baud, &parity, &bits); - - imx_setup_ufcr(sport, 0); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver imx_reg; -static struct console imx_console = { - .name = "ttySMX", - .write = imx_console_write, - .device = uart_console_device, - .setup = imx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &imx_reg, -}; - -static int __init imx_rs_console_init(void) -{ - imx_init_ports(); - register_console(&imx_console); - return 0; -} -console_initcall(imx_rs_console_init); - -#define IMX_CONSOLE &imx_console -#else -#define IMX_CONSOLE NULL -#endif - -static struct uart_driver imx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = "ttySMX", - .major = SERIAL_IMX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(imx_ports), - .cons = IMX_CONSOLE, -}; - -static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_suspend_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_resume(struct platform_device *dev) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_resume_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_probe(struct platform_device *dev) -{ - struct imxuart_platform_data *pdata; - - imx_ports[dev->id].port.dev = &dev->dev; - - pdata = (struct imxuart_platform_data *)dev->dev.platform_data; - if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - imx_ports[dev->id].have_rtscts = 1; - - uart_add_one_port(&imx_reg, &imx_ports[dev->id].port); - platform_set_drvdata(dev, &imx_ports[dev->id]); - return 0; -} - -static int serial_imx_remove(struct platform_device *dev) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (sport) - uart_remove_one_port(&imx_reg, &sport->port); - - return 0; -} - -static struct platform_driver serial_imx_driver = { - .probe = serial_imx_probe, - .remove = serial_imx_remove, - - .suspend = serial_imx_suspend, - .resume = serial_imx_resume, - .driver = { - .name = "imx-uart", - }, -}; - -static int __init imx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: IMX driver\n"); - - imx_init_ports(); - - ret = uart_register_driver(&imx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_imx_driver); - if (ret != 0) - uart_unregister_driver(&imx_reg); - - return 0; -} - -static void __exit imx_serial_exit(void) -{ - platform_driver_unregister(&serial_imx_driver); - uart_unregister_driver(&imx_reg); -} - -module_init(imx_serial_init); -module_exit(imx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("IMX generic serial port driver"); -MODULE_LICENSE("GPL"); |