1 files changed, 110 insertions, 142 deletions

diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 5fda881c247..41883a87931 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -371,8 +371,8 @@ calc_sync_msg(unsigned int period, unsigned int offset, unsigned int fast,
 	msg[1] = offset;
 }
 
-int
-wd33c93_queuecommand(struct scsi_cmnd *cmd,
+static int
+wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct WD33C93_hostdata *hostdata;
@@ -381,7 +381,7 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
 	hostdata = (struct WD33C93_hostdata *) cmd->device->host->hostdata;
 
 	DB(DB_QUEUE_COMMAND,
-	   printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->serial_number))
+	   printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0]))
 
 /* Set up a few fields in the scsi_cmnd structure for our own use:
  *  - host_scribble is the pointer to the next cmd in the input queue
@@ -462,12 +462,14 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
 
 	wd33c93_execute(cmd->device->host);
 
-	DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+	DB(DB_QUEUE_COMMAND, printk(")Q "))
 
 	spin_unlock_irq(&hostdata->lock);
 	return 0;
 }
 
+DEF_SCSI_QCMD(wd33c93_queuecommand)
+
 /*
  * This routine attempts to start a scsi command. If the host_card is
  * already connected, we give up immediately. Otherwise, look through
@@ -685,7 +687,7 @@ wd33c93_execute(struct Scsi_Host *instance)
 	 */
 
 	DB(DB_EXECUTE,
-	   printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+	   printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
 }
 
 static void
@@ -961,7 +963,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 	case CSR_XFER_DONE | PHS_COMMAND:
 	case CSR_UNEXP | PHS_COMMAND:
 	case CSR_SRV_REQ | PHS_COMMAND:
-		DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+		DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
 		    transfer_pio(regs, cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR,
 				 hostdata);
 		hostdata->state = S_CONNECTED;
@@ -1005,7 +1007,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 		switch (msg) {
 
 		case COMMAND_COMPLETE:
-			DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("CCMP"))
 			    write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
 			hostdata->state = S_PRE_CMP_DISC;
 			break;
@@ -1172,7 +1174,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 
 		write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
 		if (phs == 0x60) {
-			DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+			DB(DB_INTR, printk("SX-DONE"))
 			    cmd->SCp.Message = COMMAND_COMPLETE;
 			lun = read_wd33c93(regs, WD_TARGET_LUN);
 			DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1198,8 +1200,8 @@ wd33c93_intr(struct Scsi_Host *instance)
 			wd33c93_execute(instance);
 		} else {
 			printk
-			    ("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---",
-			     asr, sr, phs, cmd->serial_number);
+			    ("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---",
+			     asr, sr, phs);
 			spin_unlock_irqrestore(&hostdata->lock, flags);
 		}
 		break;
@@ -1264,7 +1266,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 			spin_unlock_irqrestore(&hostdata->lock, flags);
 			return;
 		}
-		DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("UNEXP_DISC"))
 		    hostdata->connected = NULL;
 		hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
 		hostdata->state = S_UNCONNECTED;
@@ -1290,7 +1292,7 @@ wd33c93_intr(struct Scsi_Host *instance)
  */
 
 		write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
-		DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+		DB(DB_INTR, printk("DISC"))
 		    if (cmd == NULL) {
 			printk(" - Already disconnected! ");
 			hostdata->state = S_UNCONNECTED;
@@ -1489,7 +1491,6 @@ wd33c93_intr(struct Scsi_Host *instance)
 		} else
 			hostdata->state = S_CONNECTED;
 
-		DB(DB_INTR, printk("-%ld", cmd->serial_number))
 		    spin_unlock_irqrestore(&hostdata->lock, flags);
 		break;
 
@@ -1635,8 +1636,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 			cmd->host_scribble = NULL;
 			cmd->result = DID_ABORT << 16;
 			printk
-			    ("scsi%d: Abort - removing command %ld from input_Q. ",
-			     instance->host_no, cmd->serial_number);
+			    ("scsi%d: Abort - removing command from input_Q. ",
+			     instance->host_no);
 			enable_irq(cmd->device->host->irq);
 			cmd->scsi_done(cmd);
 			return SUCCESS;
@@ -1660,8 +1661,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 		uchar sr, asr;
 		unsigned long timeout;
 
-		printk("scsi%d: Aborting connected command %ld - ",
-		       instance->host_no, cmd->serial_number);
+		printk("scsi%d: Aborting connected command - ",
+		       instance->host_no);
 
 		printk("stopping DMA - ");
 		if (hostdata->dma == D_DMA_RUNNING) {
@@ -1727,8 +1728,8 @@ wd33c93_abort(struct scsi_cmnd * cmd)
 	while (tmp) {
 		if (tmp == cmd) {
 			printk
-			    ("scsi%d: Abort - command %ld found on disconnected_Q - ",
-			     instance->host_no, cmd->serial_number);
+			    ("scsi%d: Abort - command found on disconnected_Q - ",
+			     instance->host_no);
 			printk("Abort SNOOZE. ");
 			enable_irq(cmd->device->host->irq);
 			return FAILED;
@@ -1841,7 +1842,7 @@ check_setup_args(char *key, int *flags, int *val, char *buf)
  *
  * The original driver used to rely on a fixed sx_table, containing periods
  * for (only) the lower limits of the respective input-clock-frequency ranges
- * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with
+ * (8-10/12-15/16-20 MHz). Although it seems, that no problems occurred with
  * this setting so far, it might be desirable to adjust the transfer periods
  * closer to the really attached, possibly 25% higher, input-clock, since
  * - the wd33c93 may really use a significant shorter period, than it has
@@ -2050,26 +2051,19 @@ wd33c93_init(struct Scsi_Host *instance, const wd33c93_regs regs,
 	for (i = 0; i < MAX_SETUP_ARGS; i++)
 		printk("%s,", setup_args[i]);
 	printk("\n");
-	printk("           Version %s - %s, Compiled %s at %s\n",
-	       WD33C93_VERSION, WD33C93_DATE, __DATE__, __TIME__);
+	printk("           Version %s - %s\n", WD33C93_VERSION, WD33C93_DATE);
 }
 
-int
-wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off, int len, int in)
+int wd33c93_write_info(struct Scsi_Host *instance, char *buf, int len)
 {
-
 #ifdef PROC_INTERFACE
-
 	char *bp;
-	char tbuf[128];
 	struct WD33C93_hostdata *hd;
-	struct scsi_cmnd *cmd;
 	int x;
-	static int stop = 0;
 
 	hd = (struct WD33C93_hostdata *) instance->hostdata;
 
-/* If 'in' is TRUE we need to _read_ the proc file. We accept the following
+/* We accept the following
  * keywords (same format as command-line, but arguments are not optional):
  *    debug
  *    disconnect
@@ -2083,156 +2077,130 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off
  *    nosync
  */
 
-	if (in) {
-		buf[len] = '\0';
-		for (bp = buf; *bp; ) {
-			while (',' == *bp || ' ' == *bp)
-				++bp;
-		if (!strncmp(bp, "debug:", 6)) {
-				hd->args = simple_strtoul(bp+6, &bp, 0) & DB_MASK;
-		} else if (!strncmp(bp, "disconnect:", 11)) {
-				x = simple_strtoul(bp+11, &bp, 0);
-			if (x < DIS_NEVER || x > DIS_ALWAYS)
-				x = DIS_ADAPTIVE;
-			hd->disconnect = x;
-		} else if (!strncmp(bp, "period:", 7)) {
+	buf[len] = '\0';
+	for (bp = buf; *bp; ) {
+		while (',' == *bp || ' ' == *bp)
+			++bp;
+	if (!strncmp(bp, "debug:", 6)) {
+			hd->args = simple_strtoul(bp+6, &bp, 0) & DB_MASK;
+	} else if (!strncmp(bp, "disconnect:", 11)) {
+			x = simple_strtoul(bp+11, &bp, 0);
+		if (x < DIS_NEVER || x > DIS_ALWAYS)
+			x = DIS_ADAPTIVE;
+		hd->disconnect = x;
+	} else if (!strncmp(bp, "period:", 7)) {
+		x = simple_strtoul(bp+7, &bp, 0);
+		hd->default_sx_per =
+			hd->sx_table[round_period((unsigned int) x,
+						  hd->sx_table)].period_ns;
+	} else if (!strncmp(bp, "resync:", 7)) {
+			set_resync(hd, (int)simple_strtoul(bp+7, &bp, 0));
+	} else if (!strncmp(bp, "proc:", 5)) {
+			hd->proc = simple_strtoul(bp+5, &bp, 0);
+	} else if (!strncmp(bp, "nodma:", 6)) {
+			hd->no_dma = simple_strtoul(bp+6, &bp, 0);
+	} else if (!strncmp(bp, "level2:", 7)) {
+			hd->level2 = simple_strtoul(bp+7, &bp, 0);
+		} else if (!strncmp(bp, "burst:", 6)) {
+			hd->dma_mode =
+				simple_strtol(bp+6, &bp, 0) ? CTRL_BURST:CTRL_DMA;
+		} else if (!strncmp(bp, "fast:", 5)) {
+			x = !!simple_strtol(bp+5, &bp, 0);
+			if (x != hd->fast)
+				set_resync(hd, 0xff);
+			hd->fast = x;
+		} else if (!strncmp(bp, "nosync:", 7)) {
 			x = simple_strtoul(bp+7, &bp, 0);
-			hd->default_sx_per =
-				hd->sx_table[round_period((unsigned int) x,
-							  hd->sx_table)].period_ns;
-		} else if (!strncmp(bp, "resync:", 7)) {
-				set_resync(hd, (int)simple_strtoul(bp+7, &bp, 0));
-		} else if (!strncmp(bp, "proc:", 5)) {
-				hd->proc = simple_strtoul(bp+5, &bp, 0);
-		} else if (!strncmp(bp, "nodma:", 6)) {
-				hd->no_dma = simple_strtoul(bp+6, &bp, 0);
-		} else if (!strncmp(bp, "level2:", 7)) {
-				hd->level2 = simple_strtoul(bp+7, &bp, 0);
-			} else if (!strncmp(bp, "burst:", 6)) {
-				hd->dma_mode =
-					simple_strtol(bp+6, &bp, 0) ? CTRL_BURST:CTRL_DMA;
-			} else if (!strncmp(bp, "fast:", 5)) {
-				x = !!simple_strtol(bp+5, &bp, 0);
-				if (x != hd->fast)
-					set_resync(hd, 0xff);
-				hd->fast = x;
-			} else if (!strncmp(bp, "nosync:", 7)) {
-				x = simple_strtoul(bp+7, &bp, 0);
-				set_resync(hd, x ^ hd->no_sync);
-				hd->no_sync = x;
-			} else {
-				break; /* unknown keyword,syntax-error,... */
-			}
+			set_resync(hd, x ^ hd->no_sync);
+			hd->no_sync = x;
+		} else {
+			break; /* unknown keyword,syntax-error,... */
 		}
-		return len;
 	}
+	return len;
+#else
+	return 0;
+#endif
+}
+
+int
+wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
+{
+#ifdef PROC_INTERFACE
+	struct WD33C93_hostdata *hd;
+	struct scsi_cmnd *cmd;
+	int x;
+
+	hd = (struct WD33C93_hostdata *) instance->hostdata;
 
 	spin_lock_irq(&hd->lock);
-	bp = buf;
-	*bp = '\0';
-	if (hd->proc & PR_VERSION) {
-		sprintf(tbuf, "\nVersion %s - %s. Compiled %s %s",
-			WD33C93_VERSION, WD33C93_DATE, __DATE__, __TIME__);
-		strcat(bp, tbuf);
-	}
+	if (hd->proc & PR_VERSION)
+		seq_printf(m, "\nVersion %s - %s.",
+			WD33C93_VERSION, WD33C93_DATE);
+
 	if (hd->proc & PR_INFO) {
-		sprintf(tbuf, "\nclock_freq=%02x no_sync=%02x no_dma=%d"
+		seq_printf(m, "\nclock_freq=%02x no_sync=%02x no_dma=%d"
 			" dma_mode=%02x fast=%d",
 			hd->clock_freq, hd->no_sync, hd->no_dma, hd->dma_mode, hd->fast);
-		strcat(bp, tbuf);
-		strcat(bp, "\nsync_xfer[] =       ");
-		for (x = 0; x < 7; x++) {
-			sprintf(tbuf, "\t%02x", hd->sync_xfer[x]);
-			strcat(bp, tbuf);
-		}
-		strcat(bp, "\nsync_stat[] =       ");
-		for (x = 0; x < 7; x++) {
-			sprintf(tbuf, "\t%02x", hd->sync_stat[x]);
-			strcat(bp, tbuf);
-		}
+		seq_printf(m, "\nsync_xfer[] =       ");
+		for (x = 0; x < 7; x++)
+			seq_printf(m, "\t%02x", hd->sync_xfer[x]);
+		seq_printf(m, "\nsync_stat[] =       ");
+		for (x = 0; x < 7; x++)
+			seq_printf(m, "\t%02x", hd->sync_stat[x]);
 	}
 #ifdef PROC_STATISTICS
 	if (hd->proc & PR_STATISTICS) {
-		strcat(bp, "\ncommands issued:    ");
-		for (x = 0; x < 7; x++) {
-			sprintf(tbuf, "\t%ld", hd->cmd_cnt[x]);
-			strcat(bp, tbuf);
-		}
-		strcat(bp, "\ndisconnects allowed:");
-		for (x = 0; x < 7; x++) {
-			sprintf(tbuf, "\t%ld", hd->disc_allowed_cnt[x]);
-			strcat(bp, tbuf);
-		}
-		strcat(bp, "\ndisconnects done:   ");
-		for (x = 0; x < 7; x++) {
-			sprintf(tbuf, "\t%ld", hd->disc_done_cnt[x]);
-			strcat(bp, tbuf);
-		}
-		sprintf(tbuf,
+		seq_printf(m, "\ncommands issued:    ");
+		for (x = 0; x < 7; x++)
+			seq_printf(m, "\t%ld", hd->cmd_cnt[x]);
+		seq_printf(m, "\ndisconnects allowed:");
+		for (x = 0; x < 7; x++)
+			seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]);
+		seq_printf(m, "\ndisconnects done:   ");
+		for (x = 0; x < 7; x++)
+			seq_printf(m, "\t%ld", hd->disc_done_cnt[x]);
+		seq_printf(m,
 			"\ninterrupts: %ld, DATA_PHASE ints: %ld DMA, %ld PIO",
 			hd->int_cnt, hd->dma_cnt, hd->pio_cnt);
-		strcat(bp, tbuf);
 	}
 #endif
 	if (hd->proc & PR_CONNECTED) {
-		strcat(bp, "\nconnected:     ");
+		seq_printf(m, "\nconnected:     ");
 		if (hd->connected) {
 			cmd = (struct scsi_cmnd *) hd->connected;
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
-			strcat(bp, tbuf);
+			seq_printf(m, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 		}
 	}
 	if (hd->proc & PR_INPUTQ) {
-		strcat(bp, "\ninput_Q:       ");
+		seq_printf(m, "\ninput_Q:       ");
 		cmd = (struct scsi_cmnd *) hd->input_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
-			strcat(bp, tbuf);
+			seq_printf(m, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			cmd = (struct scsi_cmnd *) cmd->host_scribble;
 		}
 	}
 	if (hd->proc & PR_DISCQ) {
-		strcat(bp, "\ndisconnected_Q:");
+		seq_printf(m, "\ndisconnected_Q:");
 		cmd = (struct scsi_cmnd *) hd->disconnected_Q;
 		while (cmd) {
-			sprintf(tbuf, " %ld-%d:%d(%02x)",
-				cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
-			strcat(bp, tbuf);
+			seq_printf(m, " %d:%d(%02x)",
+				cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 			cmd = (struct scsi_cmnd *) cmd->host_scribble;
 		}
 	}
-	strcat(bp, "\n");
+	seq_printf(m, "\n");
 	spin_unlock_irq(&hd->lock);
-	*start = buf;
-	if (stop) {
-		stop = 0;
-		return 0;
-	}
-	if (off > 0x40000)	/* ALWAYS stop after 256k bytes have been read */
-		stop = 1;
-	if (hd->proc & PR_STOP)	/* stop every other time */
-		stop = 1;
-	return strlen(bp);
-
-#else				/* PROC_INTERFACE */
-
-	return 0;
-
 #endif				/* PROC_INTERFACE */
-
-}
-
-void
-wd33c93_release(void)
-{
+	return 0;
 }
 
 EXPORT_SYMBOL(wd33c93_host_reset);
 EXPORT_SYMBOL(wd33c93_init);
-EXPORT_SYMBOL(wd33c93_release);
 EXPORT_SYMBOL(wd33c93_abort);
 EXPORT_SYMBOL(wd33c93_queuecommand);
 EXPORT_SYMBOL(wd33c93_intr);
-EXPORT_SYMBOL(wd33c93_proc_info);
+EXPORT_SYMBOL(wd33c93_show_info);
+EXPORT_SYMBOL(wd33c93_write_info);