diff options
Diffstat (limited to 'drivers/scsi/ufs')
| -rw-r--r-- | drivers/scsi/ufs/Kconfig | 70 | ||||
| -rw-r--r-- | drivers/scsi/ufs/Makefile | 4 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufs.h | 329 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pci.c | 238 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pltfrm.c | 218 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 3247 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 334 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshci.h | 385 | ||||
| -rw-r--r-- | drivers/scsi/ufs/unipro.h | 151 |
9 files changed, 4976 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig new file mode 100644 index 00000000000..f07f90179bb --- /dev/null +++ b/drivers/scsi/ufs/Kconfig @@ -0,0 +1,70 @@ +# +# Kernel configuration file for the UFS Host Controller +# +# This code is based on drivers/scsi/ufs/Kconfig +# Copyright (C) 2011-2013 Samsung India Software Operations +# +# Authors: +# Santosh Yaraganavi <santosh.sy@samsung.com> +# Vinayak Holikatti <h.vinayak@samsung.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# See the COPYING file in the top-level directory or visit +# <http://www.gnu.org/licenses/gpl-2.0.html> +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# This program is provided "AS IS" and "WITH ALL FAULTS" and +# without warranty of any kind. You are solely responsible for +# determining the appropriateness of using and distributing +# the program and assume all risks associated with your exercise +# of rights with respect to the program, including but not limited +# to infringement of third party rights, the risks and costs of +# program errors, damage to or loss of data, programs or equipment, +# and unavailability or interruption of operations. Under no +# circumstances will the contributor of this Program be liable for +# any damages of any kind arising from your use or distribution of +# this program. + +config SCSI_UFSHCD + tristate "Universal Flash Storage Controller Driver Core" + depends on SCSI && SCSI_DMA + ---help--- + This selects the support for UFS devices in Linux, say Y and make + sure that you know the name of your UFS host adapter (the card + inside your computer that "speaks" the UFS protocol, also + called UFS Host Controller), because you will be asked for it. + The module will be called ufshcd. + + To compile this driver as a module, choose M here and read + <file:Documentation/scsi/ufs.txt>. + However, do not compile this as a module if your root file system + (the one containing the directory /) is located on a UFS device. + +config SCSI_UFSHCD_PCI + tristate "PCI bus based UFS Controller support" + depends on SCSI_UFSHCD && PCI + ---help--- + This selects the PCI UFS Host Controller Interface. Select this if + you have UFS Host Controller with PCI Interface. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +config SCSI_UFSHCD_PLATFORM + tristate "Platform bus based UFS Controller support" + depends on SCSI_UFSHCD + ---help--- + This selects the UFS host controller support. Select this if + you have an UFS controller on Platform bus. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile new file mode 100644 index 00000000000..1e5bd48457d --- /dev/null +++ b/drivers/scsi/ufs/Makefile @@ -0,0 +1,4 @@ +# UFSHCD makefile +obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o +obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o +obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h new file mode 100644 index 00000000000..f42d1cee652 --- /dev/null +++ b/drivers/scsi/ufs/ufs.h @@ -0,0 +1,329 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufs.h + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#ifndef _UFS_H +#define _UFS_H + +#include <linux/mutex.h> +#include <linux/types.h> + +#define MAX_CDB_SIZE 16 +#define GENERAL_UPIU_REQUEST_SIZE 32 +#define QUERY_DESC_MAX_SIZE 256 +#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \ + (sizeof(struct utp_upiu_header))) + +#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ + cpu_to_be32((byte3 << 24) | (byte2 << 16) |\ + (byte1 << 8) | (byte0)) + +/* + * UFS Protocol Information Unit related definitions + */ + +/* Task management functions */ +enum { + UFS_ABORT_TASK = 0x01, + UFS_ABORT_TASK_SET = 0x02, + UFS_CLEAR_TASK_SET = 0x04, + UFS_LOGICAL_RESET = 0x08, + UFS_QUERY_TASK = 0x80, + UFS_QUERY_TASK_SET = 0x81, +}; + +/* UTP UPIU Transaction Codes Initiator to Target */ +enum { + UPIU_TRANSACTION_NOP_OUT = 0x00, + UPIU_TRANSACTION_COMMAND = 0x01, + UPIU_TRANSACTION_DATA_OUT = 0x02, + UPIU_TRANSACTION_TASK_REQ = 0x04, + UPIU_TRANSACTION_QUERY_REQ = 0x16, +}; + +/* UTP UPIU Transaction Codes Target to Initiator */ +enum { + UPIU_TRANSACTION_NOP_IN = 0x20, + UPIU_TRANSACTION_RESPONSE = 0x21, + UPIU_TRANSACTION_DATA_IN = 0x22, + UPIU_TRANSACTION_TASK_RSP = 0x24, + UPIU_TRANSACTION_READY_XFER = 0x31, + UPIU_TRANSACTION_QUERY_RSP = 0x36, + UPIU_TRANSACTION_REJECT_UPIU = 0x3F, +}; + +/* UPIU Read/Write flags */ +enum { + UPIU_CMD_FLAGS_NONE = 0x00, + UPIU_CMD_FLAGS_WRITE = 0x20, + UPIU_CMD_FLAGS_READ = 0x40, +}; + +/* UPIU Task Attributes */ +enum { + UPIU_TASK_ATTR_SIMPLE = 0x00, + UPIU_TASK_ATTR_ORDERED = 0x01, + UPIU_TASK_ATTR_HEADQ = 0x02, + UPIU_TASK_ATTR_ACA = 0x03, +}; + +/* UPIU Query request function */ +enum { + UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01, + UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81, +}; + +/* Flag idn for Query Requests*/ +enum flag_idn { + QUERY_FLAG_IDN_FDEVICEINIT = 0x01, + QUERY_FLAG_IDN_BKOPS_EN = 0x04, +}; + +/* Attribute idn for Query requests */ +enum attr_idn { + QUERY_ATTR_IDN_BKOPS_STATUS = 0x05, + QUERY_ATTR_IDN_EE_CONTROL = 0x0D, + QUERY_ATTR_IDN_EE_STATUS = 0x0E, +}; + +/* Exception event mask values */ +enum { + MASK_EE_STATUS = 0xFFFF, + MASK_EE_URGENT_BKOPS = (1 << 2), +}; + +/* Background operation status */ +enum { + BKOPS_STATUS_NO_OP = 0x0, + BKOPS_STATUS_NON_CRITICAL = 0x1, + BKOPS_STATUS_PERF_IMPACT = 0x2, + BKOPS_STATUS_CRITICAL = 0x3, +}; + +/* UTP QUERY Transaction Specific Fields OpCode */ +enum query_opcode { + UPIU_QUERY_OPCODE_NOP = 0x0, + UPIU_QUERY_OPCODE_READ_DESC = 0x1, + UPIU_QUERY_OPCODE_WRITE_DESC = 0x2, + UPIU_QUERY_OPCODE_READ_ATTR = 0x3, + UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4, + UPIU_QUERY_OPCODE_READ_FLAG = 0x5, + UPIU_QUERY_OPCODE_SET_FLAG = 0x6, + UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7, + UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8, +}; + +/* Query response result code */ +enum { + QUERY_RESULT_SUCCESS = 0x00, + QUERY_RESULT_NOT_READABLE = 0xF6, + QUERY_RESULT_NOT_WRITEABLE = 0xF7, + QUERY_RESULT_ALREADY_WRITTEN = 0xF8, + QUERY_RESULT_INVALID_LENGTH = 0xF9, + QUERY_RESULT_INVALID_VALUE = 0xFA, + QUERY_RESULT_INVALID_SELECTOR = 0xFB, + QUERY_RESULT_INVALID_INDEX = 0xFC, + QUERY_RESULT_INVALID_IDN = 0xFD, + QUERY_RESULT_INVALID_OPCODE = 0xFE, + QUERY_RESULT_GENERAL_FAILURE = 0xFF, +}; + +/* UTP Transfer Request Command Type (CT) */ +enum { + UPIU_COMMAND_SET_TYPE_SCSI = 0x0, + UPIU_COMMAND_SET_TYPE_UFS = 0x1, + UPIU_COMMAND_SET_TYPE_QUERY = 0x2, +}; + +/* UTP Transfer Request Command Offset */ +#define UPIU_COMMAND_TYPE_OFFSET 28 + +/* Offset of the response code in the UPIU header */ +#define UPIU_RSP_CODE_OFFSET 8 + +enum { + MASK_SCSI_STATUS = 0xFF, + MASK_TASK_RESPONSE = 0xFF00, + MASK_RSP_UPIU_RESULT = 0xFFFF, + MASK_QUERY_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF, + MASK_RSP_EXCEPTION_EVENT = 0x10000, +}; + +/* Task management service response */ +enum { + UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00, + UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04, + UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08, + UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, + UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, +}; +/** + * struct utp_upiu_header - UPIU header structure + * @dword_0: UPIU header DW-0 + * @dword_1: UPIU header DW-1 + * @dword_2: UPIU header DW-2 + */ +struct utp_upiu_header { + __be32 dword_0; + __be32 dword_1; + __be32 dword_2; +}; + +/** + * struct utp_upiu_cmd - Command UPIU structure + * @data_transfer_len: Data Transfer Length DW-3 + * @cdb: Command Descriptor Block CDB DW-4 to DW-7 + */ +struct utp_upiu_cmd { + __be32 exp_data_transfer_len; + u8 cdb[MAX_CDB_SIZE]; +}; + +/** + * struct utp_upiu_query - upiu request buffer structure for + * query request. + * @opcode: command to perform B-0 + * @idn: a value that indicates the particular type of data B-1 + * @index: Index to further identify data B-2 + * @selector: Index to further identify data B-3 + * @reserved_osf: spec reserved field B-4,5 + * @length: number of descriptor bytes to read/write B-6,7 + * @value: Attribute value to be written DW-5 + * @reserved: spec reserved DW-6,7 + */ +struct utp_upiu_query { + u8 opcode; + u8 idn; + u8 index; + u8 selector; + __be16 reserved_osf; + __be16 length; + __be32 value; + __be32 reserved[2]; +}; + +/** + * struct utp_upiu_req - general upiu request structure + * @header:UPIU header structure DW-0 to DW-2 + * @sc: fields structure for scsi command DW-3 to DW-7 + * @qr: fields structure for query request DW-3 to DW-7 + */ +struct utp_upiu_req { + struct utp_upiu_header header; + union { + struct utp_upiu_cmd sc; + struct utp_upiu_query qr; + }; +}; + +/** + * struct utp_cmd_rsp - Response UPIU structure + * @residual_transfer_count: Residual transfer count DW-3 + * @reserved: Reserved double words DW-4 to DW-7 + * @sense_data_len: Sense data length DW-8 U16 + * @sense_data: Sense data field DW-8 to DW-12 + */ +struct utp_cmd_rsp { + __be32 residual_transfer_count; + __be32 reserved[4]; + __be16 sense_data_len; + u8 sense_data[18]; +}; + +/** + * struct utp_upiu_rsp - general upiu response structure + * @header: UPIU header structure DW-0 to DW-2 + * @sr: fields structure for scsi command DW-3 to DW-12 + * @qr: fields structure for query request DW-3 to DW-7 + */ +struct utp_upiu_rsp { + struct utp_upiu_header header; + union { + struct utp_cmd_rsp sr; + struct utp_upiu_query qr; + }; +}; + +/** + * struct utp_upiu_task_req - Task request UPIU structure + * @header - UPIU header structure DW0 to DW-2 + * @input_param1: Input parameter 1 DW-3 + * @input_param2: Input parameter 2 DW-4 + * @input_param3: Input parameter 3 DW-5 + * @reserved: Reserved double words DW-6 to DW-7 + */ +struct utp_upiu_task_req { + struct utp_upiu_header header; + __be32 input_param1; + __be32 input_param2; + __be32 input_param3; + __be32 reserved[2]; +}; + +/** + * struct utp_upiu_task_rsp - Task Management Response UPIU structure + * @header: UPIU header structure DW0-DW-2 + * @output_param1: Ouput parameter 1 DW3 + * @output_param2: Output parameter 2 DW4 + * @reserved: Reserved double words DW-5 to DW-7 + */ +struct utp_upiu_task_rsp { + struct utp_upiu_header header; + __be32 output_param1; + __be32 output_param2; + __be32 reserved[3]; +}; + +/** + * struct ufs_query_req - parameters for building a query request + * @query_func: UPIU header query function + * @upiu_req: the query request data + */ +struct ufs_query_req { + u8 query_func; + struct utp_upiu_query upiu_req; +}; + +/** + * struct ufs_query_resp - UPIU QUERY + * @response: device response code + * @upiu_res: query response data + */ +struct ufs_query_res { + u8 response; + struct utp_upiu_query upiu_res; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c new file mode 100644 index 00000000000..8b9531204c2 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -0,0 +1,238 @@ +/* + * Universal Flash Storage Host controller PCI glue driver + * + * This code is based on drivers/scsi/ufs/ufshcd-pci.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include "ufshcd.h" +#include <linux/pci.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_PM +/** + * ufshcd_pci_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_pci_suspend(struct device *dev) +{ + /* + * TODO: + * 1. Call ufshcd_suspend + * 2. Do bus specific power management + */ + + return -ENOSYS; +} + +/** + * ufshcd_pci_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_pci_resume(struct device *dev) +{ + /* + * TODO: + * 1. Call ufshcd_resume. + * 2. Do bus specific wake up + */ + + return -ENOSYS; +} +#else +#define ufshcd_pci_suspend NULL +#define ufshcd_pci_resume NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME +static int ufshcd_pci_runtime_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_suspend(hba); +} +static int ufshcd_pci_runtime_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_resume(hba); +} +static int ufshcd_pci_runtime_idle(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_idle(hba); +} +#else /* !CONFIG_PM_RUNTIME */ +#define ufshcd_pci_runtime_suspend NULL +#define ufshcd_pci_runtime_resume NULL +#define ufshcd_pci_runtime_idle NULL +#endif /* CONFIG_PM_RUNTIME */ + +/** + * ufshcd_pci_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_pci_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +/** + * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_pci_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + ufshcd_remove(hba); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct pci_dev *pdev) +{ + int err; + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + return 0; + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + return err; +} + +/** + * ufshcd_pci_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int +ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + int err; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pcim_enable_device failed\n"); + return err; + } + + pci_set_master(pdev); + + err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request and iomap failed\n"); + return err; + } + + mmio_base = pcim_iomap_table(pdev)[0]; + + err = ufshcd_set_dma_mask(pdev); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + return err; + } + + err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + return err; + } + + pci_set_drvdata(pdev, hba); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); + + return 0; +} + +static const struct dev_pm_ops ufshcd_pci_pm_ops = { + .suspend = ufshcd_pci_suspend, + .resume = ufshcd_pci_resume, + .runtime_suspend = ufshcd_pci_runtime_suspend, + .runtime_resume = ufshcd_pci_runtime_resume, + .runtime_idle = ufshcd_pci_runtime_idle, +}; + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_pci_probe, + .remove = ufshcd_pci_remove, + .shutdown = ufshcd_pci_shutdown, + .driver = { + .pm = &ufshcd_pci_pm_ops + }, +}; + +module_pci_driver(ufshcd_pci_driver); + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); +MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("UFS host controller PCI glue driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c new file mode 100644 index 00000000000..5e462322542 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -0,0 +1,218 @@ +/* + * Universal Flash Storage Host controller Platform bus based glue driver + * + * This code is based on drivers/scsi/ufs/ufshcd-pltfrm.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> + +#include "ufshcd.h" + +#ifdef CONFIG_PM +/** + * ufshcd_pltfrm_suspend - suspend power management function + * @dev: pointer to device handle + * + * + * Returns 0 + */ +static int ufshcd_pltfrm_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ufs_hba *hba = platform_get_drvdata(pdev); + + /* + * TODO: + * 1. Call ufshcd_suspend + * 2. Do bus specific power management + */ + + disable_irq(hba->irq); + + return 0; +} + +/** + * ufshcd_pltfrm_resume - resume power management function + * @dev: pointer to device handle + * + * Returns 0 + */ +static int ufshcd_pltfrm_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ufs_hba *hba = platform_get_drvdata(pdev); + + /* + * TODO: + * 1. Call ufshcd_resume. + * 2. Do bus specific wake up + */ + + enable_irq(hba->irq); + + return 0; +} +#else +#define ufshcd_pltfrm_suspend NULL +#define ufshcd_pltfrm_resume NULL +#endif + +#ifdef CONFIG_PM_RUNTIME +static int ufshcd_pltfrm_runtime_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_suspend(hba); +} +static int ufshcd_pltfrm_runtime_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_resume(hba); +} +static int ufshcd_pltfrm_runtime_idle(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (!hba) + return 0; + + return ufshcd_runtime_idle(hba); +} +#else /* !CONFIG_PM_RUNTIME */ +#define ufshcd_pltfrm_runtime_suspend NULL +#define ufshcd_pltfrm_runtime_resume NULL +#define ufshcd_pltfrm_runtime_idle NULL +#endif /* CONFIG_PM_RUNTIME */ + +/** + * ufshcd_pltfrm_probe - probe routine of the driver + * @pdev: pointer to Platform device handle + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_pltfrm_probe(struct platform_device *pdev) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + struct resource *mem_res; + int irq, err; + struct device *dev = &pdev->dev; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mmio_base = devm_ioremap_resource(dev, mem_res); + if (IS_ERR(mmio_base)) { + err = PTR_ERR(mmio_base); + goto out; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "IRQ resource not available\n"); + err = -ENODEV; + goto out; + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + err = ufshcd_init(dev, &hba, mmio_base, irq); + if (err) { + dev_err(dev, "Intialization failed\n"); + goto out_disable_rpm; + } + + platform_set_drvdata(pdev, hba); + + return 0; + +out_disable_rpm: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); +out: + return err; +} + +/** + * ufshcd_pltfrm_remove - remove platform driver routine + * @pdev: pointer to platform device handle + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_pltfrm_remove(struct platform_device *pdev) +{ + struct ufs_hba *hba = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&(pdev)->dev); + ufshcd_remove(hba); + return 0; +} + +static const struct of_device_id ufs_of_match[] = { + { .compatible = "jedec,ufs-1.1"}, + {}, +}; + +static const struct dev_pm_ops ufshcd_dev_pm_ops = { + .suspend = ufshcd_pltfrm_suspend, + .resume = ufshcd_pltfrm_resume, + .runtime_suspend = ufshcd_pltfrm_runtime_suspend, + .runtime_resume = ufshcd_pltfrm_runtime_resume, + .runtime_idle = ufshcd_pltfrm_runtime_idle, +}; + +static struct platform_driver ufshcd_pltfrm_driver = { + .probe = ufshcd_pltfrm_probe, + .remove = ufshcd_pltfrm_remove, + .driver = { + .name = "ufshcd", + .owner = THIS_MODULE, + .pm = &ufshcd_dev_pm_ops, + .of_match_table = ufs_of_match, + }, +}; + +module_platform_driver(ufshcd_pltfrm_driver); + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); +MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c new file mode 100644 index 00000000000..0c287725125 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.c @@ -0,0 +1,3247 @@ +/* + * Universal Flash Storage Host controller driver Core + * + * This code is based on drivers/scsi/ufs/ufshcd.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include <linux/async.h> + +#include "ufshcd.h" +#include "unipro.h" + +#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ + UTP_TASK_REQ_COMPL |\ + UIC_POWER_MODE |\ + UFSHCD_ERROR_MASK) +/* UIC command timeout, unit: ms */ +#define UIC_CMD_TIMEOUT 500 + +/* NOP OUT retries waiting for NOP IN response */ +#define NOP_OUT_RETRIES 10 +/* Timeout after 30 msecs if NOP OUT hangs without response */ +#define NOP_OUT_TIMEOUT 30 /* msecs */ + +/* Query request retries */ +#define QUERY_REQ_RETRIES 10 +/* Query request timeout */ +#define QUERY_REQ_TIMEOUT 30 /* msec */ + +/* Task management command timeout */ +#define TM_CMD_TIMEOUT 100 /* msecs */ + +/* Expose the flag value from utp_upiu_query.value */ +#define MASK_QUERY_UPIU_FLAG_LOC 0xFF + +/* Interrupt aggregation default timeout, unit: 40us */ +#define INT_AGGR_DEF_TO 0x02 + +enum { + UFSHCD_MAX_CHANNEL = 0, + UFSHCD_MAX_ID = 1, + UFSHCD_MAX_LUNS = 8, + UFSHCD_CMD_PER_LUN = 32, + UFSHCD_CAN_QUEUE = 32, +}; + +/* UFSHCD states */ +enum { + UFSHCD_STATE_RESET, + UFSHCD_STATE_ERROR, + UFSHCD_STATE_OPERATIONAL, +}; + +/* UFSHCD error handling flags */ +enum { + UFSHCD_EH_IN_PROGRESS = (1 << 0), +}; + +/* UFSHCD UIC layer error flags */ +enum { + UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */ + UFSHCD_UIC_NL_ERROR = (1 << 1), /* Network layer error */ + UFSHCD_UIC_TL_ERROR = (1 << 2), /* Transport Layer error */ + UFSHCD_UIC_DME_ERROR = (1 << 3), /* DME error */ +}; + +/* Interrupt configuration options */ +enum { + UFSHCD_INT_DISABLE, + UFSHCD_INT_ENABLE, + UFSHCD_INT_CLEAR, +}; + +#define ufshcd_set_eh_in_progress(h) \ + (h->eh_flags |= UFSHCD_EH_IN_PROGRESS) +#define ufshcd_eh_in_progress(h) \ + (h->eh_flags & UFSHCD_EH_IN_PROGRESS) +#define ufshcd_clear_eh_in_progress(h) \ + (h->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) + +static void ufshcd_tmc_handler(struct ufs_hba *hba); +static void ufshcd_async_scan(void *data, async_cookie_t cookie); +static int ufshcd_reset_and_restore(struct ufs_hba *hba); +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); + +/* + * ufshcd_wait_for_register - wait for register value to change + * @hba - per-adapter interface + * @reg - mmio register offset + * @mask - mask to apply to read register value + * @val - wait condition + * @interval_us - polling interval in microsecs + * @timeout_ms - timeout in millisecs + * + * Returns -ETIMEDOUT on error, zero on success + */ +static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long interval_us, unsigned long timeout_ms) +{ + int err = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + + /* ignore bits that we don't intend to wait on */ + val = val & mask; + + while ((ufshcd_readl(hba, reg) & mask) != val) { + /* wakeup within 50us of expiry */ + usleep_range(interval_us, interval_us + 50); + + if (time_after(jiffies, timeout)) { + if ((ufshcd_readl(hba, reg) & mask) != val) + err = -ETIMEDOUT; + break; + } + } + + return err; +} + +/** + * ufshcd_get_intr_mask - Get the interrupt bit mask + * @hba - Pointer to adapter instance + * + * Returns interrupt bit mask per version + */ +static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) +{ + if (hba->ufs_version == UFSHCI_VERSION_10) + return INTERRUPT_MASK_ALL_VER_10; + else + return INTERRUPT_MASK_ALL_VER_11; +} + +/** + * ufshcd_get_ufs_version - Get the UFS version supported by the HBA + * @hba - Pointer to adapter instance + * + * Returns UFSHCI version supported by the controller + */ +static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UFS_VERSION); +} + +/** + * ufshcd_is_device_present - Check if any device connected to + * the host controller + * @reg_hcs - host controller status register value + * + * Returns 1 if device present, 0 if no device detected + */ +static inline int ufshcd_is_device_present(u32 reg_hcs) +{ + return (DEVICE_PRESENT & reg_hcs) ? 1 : 0; +} + +/** + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status + * @lrb: pointer to local command reference block + * + * This function is used to get the OCS field from UTRD + * Returns the OCS field in the UTRD + */ +static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) +{ + return le32_to_cpu(lrbp->utr_descriptor_ptr->header.dword_2) & MASK_OCS; +} + +/** + * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status + * @task_req_descp: pointer to utp_task_req_desc structure + * + * This function is used to get the OCS field from UTMRD + * Returns the OCS field in the UTMRD + */ +static inline int +ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp) +{ + return le32_to_cpu(task_req_descp->header.dword_2) & MASK_OCS; +} + +/** + * ufshcd_get_tm_free_slot - get a free slot for task management request + * @hba: per adapter instance + * @free_slot: pointer to variable with available slot value + * + * Get a free tag and lock it until ufshcd_put_tm_slot() is called. + * Returns 0 if free slot is not available, else return 1 with tag value + * in @free_slot. + */ +static bool ufshcd_get_tm_free_slot(struct ufs_hba *hba, int *free_slot) +{ + int tag; + bool ret = false; + + if (!free_slot) + goto out; + + do { + tag = find_first_zero_bit(&hba->tm_slots_in_use, hba->nutmrs); + if (tag >= hba->nutmrs) + goto out; + } while (test_and_set_bit_lock(tag, &hba->tm_slots_in_use)); + + *free_slot = tag; + ret = true; +out: + return ret; +} + +static inline void ufshcd_put_tm_slot(struct ufs_hba *hba, int slot) +{ + clear_bit_unlock(slot, &hba->tm_slots_in_use); +} + +/** + * ufshcd_utrl_clear - Clear a bit in UTRLCLR register + * @hba: per adapter instance + * @pos: position of the bit to be cleared + */ +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) +{ + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); +} + +/** + * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY + * @reg: Register value of host controller status + * + * Returns integer, 0 on Success and positive value if failed + */ +static inline int ufshcd_get_lists_status(u32 reg) +{ + /* + * The mask 0xFF is for the following HCS register bits + * Bit Description + * 0 Device Present + * 1 UTRLRDY + * 2 UTMRLRDY + * 3 UCRDY + * 4 HEI + * 5 DEI + * 6-7 reserved + */ + return (((reg) & (0xFF)) >> 1) ^ (0x07); +} + +/** + * ufshcd_get_uic_cmd_result - Get the UIC command result + * @hba: Pointer to adapter instance + * + * This function gets the result of UIC command completion + * Returns 0 on success, non zero value on error + */ +static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & + MASK_UIC_COMMAND_RESULT; +} + +/** + * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command + * @hba: Pointer to adapter instance + * + * This function gets UIC command argument3 + * Returns 0 on success, non zero value on error + */ +static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); +} + +/** + * ufshcd_get_req_rsp - returns the TR response transaction type + * @ucd_rsp_ptr: pointer to response UPIU + */ +static inline int +ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24; +} + +/** + * ufshcd_get_rsp_upiu_result - Get the result from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function gets the response status and scsi_status from response UPIU + * Returns the response result code. + */ +static inline int +ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; +} + +/* + * ufshcd_get_rsp_upiu_data_seg_len - Get the data segment length + * from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * Return the data segment length. + */ +static inline unsigned int +ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_UPIU_DATA_SEG_LEN; +} + +/** + * ufshcd_is_exception_event - Check if the device raised an exception event + * @ucd_rsp_ptr: pointer to response UPIU + * + * The function checks if the device raised an exception event indicated in + * the Device Information field of response UPIU. + * + * Returns true if exception is raised, false otherwise. + */ +static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_EXCEPTION_EVENT ? true : false; +} + +/** + * ufshcd_reset_intr_aggr - Reset interrupt aggregation values. + * @hba: per adapter instance + */ +static inline void +ufshcd_reset_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_config_intr_aggr - Configure interrupt aggregation values. + * @hba: per adapter instance + * @cnt: Interrupt aggregation counter threshold + * @tmout: Interrupt aggregation timeout value + */ +static inline void +ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THLD_VAL(cnt) | + INT_AGGR_TIMEOUT_VAL(tmout), + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_enable_run_stop_reg - Enable run-stop registers, + * When run-stop registers are set to 1, it indicates the + * host controller that it can process the requests + * @hba: per adapter instance + */ +static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) +{ + ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TASK_REQ_LIST_RUN_STOP); + ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); +} + +/** + * ufshcd_hba_start - Start controller initialization sequence + * @hba: per adapter instance + */ +static inline void ufshcd_hba_start(struct ufs_hba *hba) +{ + ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE); +} + +/** + * ufshcd_is_hba_active - Get controller state + * @hba: per adapter instance + * + * Returns zero if controller is active, 1 otherwise + */ +static inline int ufshcd_is_hba_active(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1; +} + +/** + * ufshcd_send_command - Send SCSI or device management commands + * @hba: per adapter instance + * @task_tag: Task tag of the command + */ +static inline +void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) +{ + __set_bit(task_tag, &hba->outstanding_reqs); + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); +} + +/** + * ufshcd_copy_sense_data - Copy sense data in case of check condition + * @lrb - pointer to local reference block + */ +static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) +{ + int len; + if (lrbp->sense_buffer && + ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) { + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len); + memcpy(lrbp->sense_buffer, + lrbp->ucd_rsp_ptr->sr.sense_data, + min_t(int, len, SCSI_SENSE_BUFFERSIZE)); + } +} + +/** + * ufshcd_copy_query_response() - Copy the Query Response and the data + * descriptor + * @hba: per adapter instance + * @lrb - pointer to local reference block + */ +static +void ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + /* Get the UPIU response */ + query_res->response = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr) >> + UPIU_RSP_CODE_OFFSET; + + memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); + + + /* Get the descriptor */ + if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { + u8 *descp = (u8 *)&lrbp->ucd_rsp_ptr + + GENERAL_UPIU_REQUEST_SIZE; + u16 len; + + /* data segment length */ + len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) & + MASK_QUERY_DATA_SEG_LEN; + + memcpy(hba->dev_cmd.query.descriptor, descp, + min_t(u16, len, QUERY_DESC_MAX_SIZE)); + } +} + +/** + * ufshcd_hba_capabilities - Read controller capabilities + * @hba: per adapter instance + */ +static inline void ufshcd_hba_capabilities(struct ufs_hba *hba) +{ + hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); + + /* nutrs and nutmrs are 0 based values */ + hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1; + hba->nutmrs = + ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1; +} + +/** + * ufshcd_ready_for_uic_cmd - Check if controller is ready + * to accept UIC commands + * @hba: per adapter instance + * Return true on success, else false + */ +static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) +{ + if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY) + return true; + else + return false; +} + +/** + * ufshcd_get_upmcrs - Get the power mode change request status + * @hba: Pointer to adapter instance + * + * This function gets the UPMCRS field of HCS register + * Returns value of UPMCRS field + */ +static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; +} + +/** + * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Mutex must be held. + */ +static inline void +ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + WARN_ON(hba->active_uic_cmd); + + hba->active_uic_cmd = uic_cmd; + + /* Write Args */ + ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); + ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); + ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); + + /* Write UIC Cmd */ + ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, + REG_UIC_COMMAND); +} + +/** + * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command + * @hba: per adapter instance + * @uic_command: UIC command + * + * Must be called with mutex held. + * Returns 0 only if success. + */ +static int +ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + unsigned long flags; + + if (wait_for_completion_timeout(&uic_cmd->done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) + ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; + else + ret = -ETIMEDOUT; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->active_uic_cmd = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return ret; +} + +/** + * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called + * with mutex held. + * Returns 0 only if success. + */ +static int +__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + unsigned long flags; + + if (!ufshcd_ready_for_uic_cmd(hba)) { + dev_err(hba->dev, + "Controller not ready to accept UIC commands\n"); + return -EIO; + } + + init_completion(&uic_cmd->done); + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_dispatch_uic_cmd(hba, uic_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); + + return ret; +} + +/** + * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Returns 0 only if success. + */ +static int +ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + + mutex_lock(&hba->uic_cmd_mutex); + ret = __ufshcd_send_uic_cmd(hba, uic_cmd); + mutex_unlock(&hba->uic_cmd_mutex); + + return ret; +} + +/** + * ufshcd_map_sg - Map scatter-gather list to prdt + * @lrbp - pointer to local reference block + * + * Returns 0 in case of success, non-zero value in case of failure + */ +static int ufshcd_map_sg(struct ufshcd_lrb *lrbp) +{ + struct ufshcd_sg_entry *prd_table; + struct scatterlist *sg; + struct scsi_cmnd *cmd; + int sg_segments; + int i; + + cmd = lrbp->cmd; + sg_segments = scsi_dma_map(cmd); + if (sg_segments < 0) + return sg_segments; + + if (sg_segments) { + lrbp->utr_descriptor_ptr->prd_table_length = + cpu_to_le16((u16) (sg_segments)); + + prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr; + + scsi_for_each_sg(cmd, sg, sg_segments, i) { + prd_table[i].size = + cpu_to_le32(((u32) sg_dma_len(sg))-1); + prd_table[i].base_addr = + cpu_to_le32(lower_32_bits(sg->dma_address)); + prd_table[i].upper_addr = + cpu_to_le32(upper_32_bits(sg->dma_address)); + } + } else { + lrbp->utr_descriptor_ptr->prd_table_length = 0; + } + + return 0; +} + +/** + * ufshcd_enable_intr - enable interrupts + * @hba: per adapter instance + * @intrs: interrupt bits + */ +static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == UFSHCI_VERSION_10) { + u32 rw; + rw = set & INTERRUPT_MASK_RW_VER_10; + set = rw | ((set ^ intrs) & intrs); + } else { + set |= intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_disable_intr - disable interrupts + * @hba: per adapter instance + * @intrs: interrupt bits + */ +static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == UFSHCI_VERSION_10) { + u32 rw; + rw = (set & INTERRUPT_MASK_RW_VER_10) & + ~(intrs & INTERRUPT_MASK_RW_VER_10); + set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10); + + } else { + set &= ~intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_prepare_req_desc_hdr() - Fills the requests header + * descriptor according to request + * @lrbp: pointer to local reference block + * @upiu_flags: flags required in the header + * @cmd_dir: requests data direction + */ +static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp, + u32 *upiu_flags, enum dma_data_direction cmd_dir) +{ + struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr; + u32 data_direction; + u32 dword_0; + + if (cmd_dir == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + *upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (cmd_dir == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + *upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + *upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + dword_0 = data_direction | (lrbp->command_type + << UPIU_COMMAND_TYPE_OFFSET); + if (lrbp->intr_cmd) + dword_0 |= UTP_REQ_DESC_INT_CMD; + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = cpu_to_le32(dword_0); + + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); +} + +/** + * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc, + * for scsi commands + * @lrbp - local reference block pointer + * @upiu_flags - flags + */ +static +void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_COMMAND, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0); + + /* Total EHS length and Data segment length will be zero */ + ucd_req_ptr->header.dword_2 = 0; + + ucd_req_ptr->sc.exp_data_transfer_len = + cpu_to_be32(lrbp->cmd->sdb.length); + + memcpy(ucd_req_ptr->sc.cdb, lrbp->cmd->cmnd, + (min_t(unsigned short, lrbp->cmd->cmd_len, MAX_CDB_SIZE))); +} + +/** + * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc, + * for query requsts + * @hba: UFS hba + * @lrbp: local reference block pointer + * @upiu_flags: flags + */ +static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, u32 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + struct ufs_query *query = &hba->dev_cmd.query; + u16 len = be16_to_cpu(query->request.upiu_req.length); + u8 *descp = (u8 *)lrbp->ucd_req_ptr + GENERAL_UPIU_REQUEST_SIZE; + + /* Query request header */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_QUERY_REQ, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + 0, query->request.query_func, 0, 0); + + /* Data segment length */ + ucd_req_ptr->header.dword_2 = UPIU_HEADER_DWORD( + 0, 0, len >> 8, (u8)len); + + /* Copy the Query Request buffer as is */ + memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, + QUERY_OSF_SIZE); + + /* Copy the Descriptor */ + if ((len > 0) && (query->request.upiu_req.opcode == + UPIU_QUERY_OPCODE_WRITE_DESC)) { + memcpy(descp, query->descriptor, + min_t(u16, len, QUERY_DESC_MAX_SIZE)); + } +} + +static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + + memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD( + UPIU_TRANSACTION_NOP_OUT, 0, 0, lrbp->task_tag); +} + +/** + * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU) + * @hba - per adapter instance + * @lrb - pointer to local reference block + */ +static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + u32 upiu_flags; + int ret = 0; + + switch (lrbp->command_type) { + case UTP_CMD_TYPE_SCSI: + if (likely(lrbp->cmd)) { + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, + lrbp->cmd->sc_data_direction); + ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags); + } else { + ret = -EINVAL; + } + break; + case UTP_CMD_TYPE_DEV_MANAGE: + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); + if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) + ufshcd_prepare_utp_query_req_upiu( + hba, lrbp, upiu_flags); + else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP) + ufshcd_prepare_utp_nop_upiu(lrbp); + else + ret = -EINVAL; + break; + case UTP_CMD_TYPE_UFS: + /* For UFS native command implementation */ + ret = -ENOTSUPP; + dev_err(hba->dev, "%s: UFS native command are not supported\n", + __func__); + break; + default: + ret = -ENOTSUPP; + dev_err(hba->dev, "%s: unknown command type: 0x%x\n", + __func__, lrbp->command_type); + break; + } /* end of switch */ + + return ret; +} + +/** + * ufshcd_queuecommand - main entry point for SCSI requests + * @cmd: command from SCSI Midlayer + * @done: call back function + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) +{ + struct ufshcd_lrb *lrbp; + struct ufs_hba *hba; + unsigned long flags; + int tag; + int err = 0; + + hba = shost_priv(host); + + tag = cmd->request->tag; + + spin_lock_irqsave(hba->host->host_lock, flags); + switch (hba->ufshcd_state) { + case UFSHCD_STATE_OPERATIONAL: + break; + case UFSHCD_STATE_RESET: + err = SCSI_MLQUEUE_HOST_BUSY; + goto out_unlock; + case UFSHCD_STATE_ERROR: + set_host_byte(cmd, DID_ERROR); + cmd->scsi_done(cmd); + goto out_unlock; + default: + dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n", + __func__, hba->ufshcd_state); + set_host_byte(cmd, DID_BAD_TARGET); + cmd->scsi_done(cmd); + goto out_unlock; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* acquire the tag to make sure device cmds don't use it */ + if (test_and_set_bit_lock(tag, &hba->lrb_in_use)) { + /* + * Dev manage command in progress, requeue the command. + * Requeuing the command helps in cases where the request *may* + * find different tag instead of waiting for dev manage command + * completion. + */ + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + + lrbp = &hba->lrb[tag]; + + WARN_ON(lrbp->cmd); + lrbp->cmd = cmd; + lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE; + lrbp->sense_buffer = cmd->sense_buffer; + lrbp->task_tag = tag; + lrbp->lun = cmd->device->lun; + lrbp->intr_cmd = false; + lrbp->command_type = UTP_CMD_TYPE_SCSI; + + /* form UPIU before issuing the command */ + ufshcd_compose_upiu(hba, lrbp); + err = ufshcd_map_sg(lrbp); + if (err) { + lrbp->cmd = NULL; + clear_bit_unlock(tag, &hba->lrb_in_use); + goto out; + } + + /* issue command to the controller */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_send_command(hba, tag); +out_unlock: + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return err; +} + +static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, enum dev_cmd_type cmd_type, int tag) +{ + lrbp->cmd = NULL; + lrbp->sense_bufflen = 0; + lrbp->sense_buffer = NULL; + lrbp->task_tag = tag; + lrbp->lun = 0; /* device management cmd is not specific to any LUN */ + lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + lrbp->intr_cmd = true; /* No interrupt aggregation */ + hba->dev_cmd.type = cmd_type; + + return ufshcd_compose_upiu(hba, lrbp); +} + +static int +ufshcd_clear_cmd(struct ufs_hba *hba, int tag) +{ + int err = 0; + unsigned long flags; + u32 mask = 1 << tag; + + /* clear outstanding transaction before retry */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_utrl_clear(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* + * wait for for h/w to clear corresponding bit in door-bell. + * max. wait is 1 sec. + */ + err = ufshcd_wait_for_register(hba, + REG_UTP_TRANSFER_REQ_DOOR_BELL, + mask, ~mask, 1000, 1000); + + return err; +} + +/** + * ufshcd_dev_cmd_completion() - handles device management command responses + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static int +ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int resp; + int err = 0; + + resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + + switch (resp) { + case UPIU_TRANSACTION_NOP_IN: + if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) { + err = -EINVAL; + dev_err(hba->dev, "%s: unexpected response %x\n", + __func__, resp); + } + break; + case UPIU_TRANSACTION_QUERY_RSP: + ufshcd_copy_query_response(hba, lrbp); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + err = -EPERM; + dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", + __func__); + break; + default: + err = -EINVAL; + dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", + __func__, resp); + break; + } + + return err; +} + +static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, int max_timeout) +{ + int err = 0; + unsigned long time_left; + unsigned long flags; + + time_left = wait_for_completion_timeout(hba->dev_cmd.complete, + msecs_to_jiffies(max_timeout)); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->dev_cmd.complete = NULL; + if (likely(time_left)) { + err = ufshcd_get_tr_ocs(lrbp); + if (!err) + err = ufshcd_dev_cmd_completion(hba, lrbp); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (!time_left) { + err = -ETIMEDOUT; + if (!ufshcd_clear_cmd(hba, lrbp->task_tag)) + /* sucessfully cleared the command, retry if needed */ + err = -EAGAIN; + } + + return err; +} + +/** + * ufshcd_get_dev_cmd_tag - Get device management command tag + * @hba: per-adapter instance + * @tag: pointer to variable with available slot value + * + * Get a free slot and lock it until device management command + * completes. + * + * Returns false if free slot is unavailable for locking, else + * return true with tag value in @tag. + */ +static bool ufshcd_get_dev_cmd_tag(struct ufs_hba *hba, int *tag_out) +{ + int tag; + bool ret = false; + unsigned long tmp; + + if (!tag_out) + goto out; + + do { + tmp = ~hba->lrb_in_use; + tag = find_last_bit(&tmp, hba->nutrs); + if (tag >= hba->nutrs) + goto out; + } while (test_and_set_bit_lock(tag, &hba->lrb_in_use)); + + *tag_out = tag; + ret = true; +out: + return ret; +} + +static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag) +{ + clear_bit_unlock(tag, &hba->lrb_in_use); +} + +/** + * ufshcd_exec_dev_cmd - API for sending device management requests + * @hba - UFS hba + * @cmd_type - specifies the type (NOP, Query...) + * @timeout - time in seconds + * + * NOTE: Since there is only one available tag for device management commands, + * it is expected you hold the hba->dev_cmd.lock mutex. + */ +static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, + enum dev_cmd_type cmd_type, int timeout) +{ + struct ufshcd_lrb *lrbp; + int err; + int tag; + struct completion wait; + unsigned long flags; + + /* + * Get free slot, sleep if slots are unavailable. + * Even though we use wait_event() which sleeps indefinitely, + * the maximum wait time is bounded by SCSI request timeout. + */ + wait_event(hba->dev_cmd.tag_wq, ufshcd_get_dev_cmd_tag(hba, &tag)); + + init_completion(&wait); + lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); + err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag); + if (unlikely(err)) + goto out_put_tag; + + hba->dev_cmd.complete = &wait; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_send_command(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout); + +out_put_tag: + ufshcd_put_dev_cmd_tag(hba, tag); + wake_up(&hba->dev_cmd.tag_wq); + return err; +} + +/** + * ufshcd_query_flag() - API function for sending flag query requests + * hba: per-adapter instance + * query_opcode: flag query to perform + * idn: flag idn to access + * flag_res: the flag value after the query request completes + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, + enum flag_idn idn, bool *flag_res) +{ + struct ufs_query_req *request; + struct ufs_query_res *response; + int err; + + BUG_ON(!hba); + + mutex_lock(&hba->dev_cmd.lock); + request = &hba->dev_cmd.query.request; + response = &hba->dev_cmd.query.response; + memset(request, 0, sizeof(struct ufs_query_req)); + memset(response, 0, sizeof(struct ufs_query_res)); + + switch (opcode) { + case UPIU_QUERY_OPCODE_SET_FLAG: + case UPIU_QUERY_OPCODE_CLEAR_FLAG: + case UPIU_QUERY_OPCODE_TOGGLE_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + if (!flag_res) { + /* No dummy reads */ + dev_err(hba->dev, "%s: Invalid argument for read request\n", + __func__); + err = -EINVAL; + goto out_unlock; + } + break; + default: + dev_err(hba->dev, + "%s: Expected query flag opcode but got = %d\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + request->upiu_req.opcode = opcode; + request->upiu_req.idn = idn; + + /* Send query request */ + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, + QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, + "%s: Sending flag query for idn %d failed, err = %d\n", + __func__, idn, err); + goto out_unlock; + } + + if (flag_res) + *flag_res = (be32_to_cpu(response->upiu_res.value) & + MASK_QUERY_UPIU_FLAG_LOC) & 0x1; + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); + return err; +} + +/** + * ufshcd_query_attr - API function for sending attribute requests + * hba: per-adapter instance + * opcode: attribute opcode + * idn: attribute idn to access + * index: index field + * selector: selector field + * attr_val: the attribute value after the query request completes + * + * Returns 0 for success, non-zero in case of failure +*/ +static int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode, + enum attr_idn idn, u8 index, u8 selector, u32 *attr_val) +{ + struct ufs_query_req *request; + struct ufs_query_res *response; + int err; + + BUG_ON(!hba); + + if (!attr_val) { + dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n", + __func__, opcode); + err = -EINVAL; + goto out; + } + + mutex_lock(&hba->dev_cmd.lock); + request = &hba->dev_cmd.query.request; + response = &hba->dev_cmd.query.response; + memset(request, 0, sizeof(struct ufs_query_req)); + memset(response, 0, sizeof(struct ufs_query_res)); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + request->upiu_req.value = cpu_to_be32(*attr_val); + break; + case UPIU_QUERY_OPCODE_READ_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + request->upiu_req.opcode = opcode; + request->upiu_req.idn = idn; + request->upiu_req.index = index; + request->upiu_req.selector = selector; + + /* Send query request */ + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, + QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, err = %d\n", + __func__, opcode, idn, err); + goto out_unlock; + } + + *attr_val = be32_to_cpu(response->upiu_res.value); + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); +out: + return err; +} + +/** + * ufshcd_memory_alloc - allocate memory for host memory space data structures + * @hba: per adapter instance + * + * 1. Allocate DMA memory for Command Descriptor array + * Each command descriptor consist of Command UPIU, Response UPIU and PRDT + * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL). + * 3. Allocate DMA memory for UTP Task Management Request Descriptor List + * (UTMRDL) + * 4. Allocate memory for local reference block(lrb). + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_memory_alloc(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + /* Allocate memory for UTP command descriptors */ + ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + hba->ucdl_base_addr = dmam_alloc_coherent(hba->dev, + ucdl_size, + &hba->ucdl_dma_addr, + GFP_KERNEL); + + /* + * UFSHCI requires UTP command descriptor to be 128 byte aligned. + * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE + * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will + * be aligned to 128 bytes as well + */ + if (!hba->ucdl_base_addr || + WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Command Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Transfer descriptors + * UFSHCI requires 1024 byte alignment of UTRD + */ + utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + hba->utrdl_base_addr = dmam_alloc_coherent(hba->dev, + utrdl_size, + &hba->utrdl_dma_addr, + GFP_KERNEL); + if (!hba->utrdl_base_addr || + WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Transfer Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Task Management descriptors + * UFSHCI requires 1024 byte alignment of UTMRD + */ + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + hba->utmrdl_base_addr = dmam_alloc_coherent(hba->dev, + utmrdl_size, + &hba->utmrdl_dma_addr, + GFP_KERNEL); + if (!hba->utmrdl_base_addr || + WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Task Management Descriptor Memory allocation failed\n"); + goto out; + } + + /* Allocate memory for local reference block */ + hba->lrb = devm_kzalloc(hba->dev, + hba->nutrs * sizeof(struct ufshcd_lrb), + GFP_KERNEL); + if (!hba->lrb) { + dev_err(hba->dev, "LRB Memory allocation failed\n"); + goto out; + } + return 0; +out: + return -ENOMEM; +} + +/** + * ufshcd_host_memory_configure - configure local reference block with + * memory offsets + * @hba: per adapter instance + * + * Configure Host memory space + * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA + * address. + * 2. Update each UTRD with Response UPIU offset, Response UPIU length + * and PRDT offset. + * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT + * into local reference block. + */ +static void ufshcd_host_memory_configure(struct ufs_hba *hba) +{ + struct utp_transfer_cmd_desc *cmd_descp; + struct utp_transfer_req_desc *utrdlp; + dma_addr_t cmd_desc_dma_addr; + dma_addr_t cmd_desc_element_addr; + u16 response_offset; + u16 prdt_offset; + int cmd_desc_size; + int i; + + utrdlp = hba->utrdl_base_addr; + cmd_descp = hba->ucdl_base_addr; + + response_offset = + offsetof(struct utp_transfer_cmd_desc, response_upiu); + prdt_offset = + offsetof(struct utp_transfer_cmd_desc, prd_table); + + cmd_desc_size = sizeof(struct utp_transfer_cmd_desc); + cmd_desc_dma_addr = hba->ucdl_dma_addr; + + for (i = 0; i < hba->nutrs; i++) { + /* Configure UTRD with command descriptor base address */ + cmd_desc_element_addr = + (cmd_desc_dma_addr + (cmd_desc_size * i)); + utrdlp[i].command_desc_base_addr_lo = + cpu_to_le32(lower_32_bits(cmd_desc_element_addr)); + utrdlp[i].command_desc_base_addr_hi = + cpu_to_le32(upper_32_bits(cmd_desc_element_addr)); + + /* Response upiu and prdt offset should be in double words */ + utrdlp[i].response_upiu_offset = + cpu_to_le16((response_offset >> 2)); + utrdlp[i].prd_table_offset = + cpu_to_le16((prdt_offset >> 2)); + utrdlp[i].response_upiu_length = + cpu_to_le16(ALIGNED_UPIU_SIZE >> 2); + + hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); + hba->lrb[i].ucd_req_ptr = + (struct utp_upiu_req *)(cmd_descp + i); + hba->lrb[i].ucd_rsp_ptr = + (struct utp_upiu_rsp *)cmd_descp[i].response_upiu; + hba->lrb[i].ucd_prdt_ptr = + (struct ufshcd_sg_entry *)cmd_descp[i].prd_table; + } +} + +/** + * ufshcd_dme_link_startup - Notify Unipro to perform link startup + * @hba: per adapter instance + * + * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer, + * in order to initialize the Unipro link startup procedure. + * Once the Unipro links are up, the device connected to the controller + * is detected. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_link_startup(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_LINK_STARTUP; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-link-startup: error code %d\n", ret); + return ret; +} + +/** + * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @attr_set: attribute set type as uic command argument2 + * @mib_val: setting value as uic command argument3 + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-set", + "dme-peer-set" + }; + const char *set = action[!!peer]; + int ret; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET; + uic_cmd.argument1 = attr_sel; + uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set); + uic_cmd.argument3 = mib_val; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr); + +/** + * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @mib_val: the value of the attribute as returned by the UIC command + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-get", + "dme-peer-get" + }; + const char *get = action[!!peer]; + int ret; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; + uic_cmd.argument1 = attr_sel; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) { + dev_err(hba->dev, "%s: attr-id 0x%x error code %d\n", + get, UIC_GET_ATTR_ID(attr_sel), ret); + goto out; + } + + if (mib_val) + *mib_val = uic_cmd.argument3; +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); + +/** + * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage + * using DME_SET primitives. + * @hba: per adapter instance + * @mode: powr mode value + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +{ + struct uic_command uic_cmd = {0}; + struct completion pwr_done; + unsigned long flags; + u8 status; + int ret; + + uic_cmd.command = UIC_CMD_DME_SET; + uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); + uic_cmd.argument3 = mode; + init_completion(&pwr_done); + + mutex_lock(&hba->uic_cmd_mutex); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->pwr_done = &pwr_done; + spin_unlock_irqrestore(hba->host->host_lock, flags); + ret = __ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) { + dev_err(hba->dev, + "pwr mode change with mode 0x%x uic error %d\n", + mode, ret); + goto out; + } + + if (!wait_for_completion_timeout(hba->pwr_done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) { + dev_err(hba->dev, + "pwr mode change with mode 0x%x completion timeout\n", + mode); + ret = -ETIMEDOUT; + goto out; + } + + status = ufshcd_get_upmcrs(hba); + if (status != PWR_LOCAL) { + dev_err(hba->dev, + "pwr mode change failed, host umpcrs:0x%x\n", + status); + ret = (status != PWR_OK) ? status : -1; + } +out: + spin_lock_irqsave(hba->host->host_lock, flags); + hba->pwr_done = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + mutex_unlock(&hba->uic_cmd_mutex); + return ret; +} + +/** + * ufshcd_config_max_pwr_mode - Set & Change power mode with + * maximum capability attribute information. + * @hba: per adapter instance + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba) +{ + enum {RX = 0, TX = 1}; + u32 lanes[] = {1, 1}; + u32 gear[] = {1, 1}; + u8 pwr[] = {FASTAUTO_MODE, FASTAUTO_MODE}; + int ret; + + /* Get the connected lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), &lanes[RX]); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), &lanes[TX]); + + /* + * First, get the maximum gears of HS speed. + * If a zero value, it means there is no HSGEAR capability. + * Then, get the maximum gears of PWM speed. + */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[RX]); + if (!gear[RX]) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), &gear[RX]); + pwr[RX] = SLOWAUTO_MODE; + } + + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[TX]); + if (!gear[TX]) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &gear[TX]); + pwr[TX] = SLOWAUTO_MODE; + } + + /* + * Configure attributes for power mode change with below. + * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, + * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, + * - PA_HSSERIES + */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), gear[RX]); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), lanes[RX]); + if (pwr[RX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); + + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), gear[TX]); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), lanes[TX]); + if (pwr[TX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); + + if (pwr[RX] == FASTAUTO_MODE || pwr[TX] == FASTAUTO_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), PA_HS_MODE_B); + + ret = ufshcd_uic_change_pwr_mode(hba, pwr[RX] << 4 | pwr[TX]); + if (ret) + dev_err(hba->dev, + "pwr_mode: power mode change failed %d\n", ret); + + return ret; +} + +/** + * ufshcd_complete_dev_init() - checks device readiness + * hba: per-adapter instance + * + * Set fDeviceInit flag and poll until device toggles it. + */ +static int ufshcd_complete_dev_init(struct ufs_hba *hba) +{ + int i, retries, err = 0; + bool flag_res = 1; + + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + /* Set the fDeviceInit flag */ + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, NULL); + if (!err || err == -ETIMEDOUT) + break; + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); + } + if (err) { + dev_err(hba->dev, + "%s setting fDeviceInit flag failed with error %d\n", + __func__, err); + goto out; + } + + /* poll for max. 100 iterations for fDeviceInit flag to clear */ + for (i = 0; i < 100 && !err && flag_res; i++) { + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + err = ufshcd_query_flag(hba, + UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, &flag_res); + if (!err || err == -ETIMEDOUT) + break; + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, + err); + } + } + if (err) + dev_err(hba->dev, + "%s reading fDeviceInit flag failed with error %d\n", + __func__, err); + else if (flag_res) + dev_err(hba->dev, + "%s fDeviceInit was not cleared by the device\n", + __func__); + +out: + return err; +} + +/** + * ufshcd_make_hba_operational - Make UFS controller operational + * @hba: per adapter instance + * + * To bring UFS host controller to operational state, + * 1. Check if device is present + * 2. Enable required interrupts + * 3. Configure interrupt aggregation + * 4. Program UTRL and UTMRL base addres + * 5. Configure run-stop-registers + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_make_hba_operational(struct ufs_hba *hba) +{ + int err = 0; + u32 reg; + + /* check if device present */ + reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); + if (!ufshcd_is_device_present(reg)) { + dev_err(hba->dev, "cc: Device not present\n"); + err = -ENXIO; + goto out; + } + + /* Enable required interrupts */ + ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); + + /* Configure interrupt aggregation */ + ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); + + /* Configure UTRL and UTMRL base address registers */ + ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_H); + ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_H); + + /* + * UCRDY, UTMRLDY and UTRLRDY bits must be 1 + * DEI, HEI bits must be 0 + */ + if (!(ufshcd_get_lists_status(reg))) { + ufshcd_enable_run_stop_reg(hba); + } else { + dev_err(hba->dev, + "Host controller not ready to process requests"); + err = -EIO; + goto out; + } + +out: + return err; +} + +/** + * ufshcd_hba_enable - initialize the controller + * @hba: per adapter instance + * + * The controller resets itself and controller firmware initialization + * sequence kicks off. When controller is ready it will set + * the Host Controller Enable bit to 1. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int retry; + + /* + * msleep of 1 and 5 used in this function might result in msleep(20), + * but it was necessary to send the UFS FPGA to reset mode during + * development and testing of this driver. msleep can be changed to + * mdelay and retry count can be reduced based on the controller. + */ + if (!ufshcd_is_hba_active(hba)) { + + /* change controller state to "reset state" */ + ufshcd_hba_stop(hba); + + /* + * This delay is based on the testing done with UFS host + * controller FPGA. The delay can be changed based on the + * host controller used. + */ + msleep(5); + } + + /* start controller initialization sequence */ + ufshcd_hba_start(hba); + + /* + * To initialize a UFS host controller HCE bit must be set to 1. + * During initialization the HCE bit value changes from 1->0->1. + * When the host controller completes initialization sequence + * it sets the value of HCE bit to 1. The same HCE bit is read back + * to check if the controller has completed initialization sequence. + * So without this delay the value HCE = 1, set in the previous + * instruction might be read back. + * This delay can be changed based on the controller. + */ + msleep(1); + + /* wait for the host controller to complete initialization */ + retry = 10; + while (ufshcd_is_hba_active(hba)) { + if (retry) { + retry--; + } else { + dev_err(hba->dev, + "Controller enable failed\n"); + return -EIO; + } + msleep(5); + } + return 0; +} + +/** + * ufshcd_link_startup - Initialize unipro link startup + * @hba: per adapter instance + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_link_startup(struct ufs_hba *hba) +{ + int ret; + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); + + ret = ufshcd_dme_link_startup(hba); + if (ret) + goto out; + + ret = ufshcd_make_hba_operational(hba); + +out: + if (ret) + dev_err(hba->dev, "link startup failed %d\n", ret); + return ret; +} + +/** + * ufshcd_verify_dev_init() - Verify device initialization + * @hba: per-adapter instance + * + * Send NOP OUT UPIU and wait for NOP IN response to check whether the + * device Transport Protocol (UTP) layer is ready after a reset. + * If the UTP layer at the device side is not initialized, it may + * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT + * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations. + */ +static int ufshcd_verify_dev_init(struct ufs_hba *hba) +{ + int err = 0; + int retries; + + mutex_lock(&hba->dev_cmd.lock); + for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, + NOP_OUT_TIMEOUT); + + if (!err || err == -ETIMEDOUT) + break; + + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); + } + mutex_unlock(&hba->dev_cmd.lock); + + if (err) + dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); + return err; +} + +/** + * ufshcd_slave_alloc - handle initial SCSI device configurations + * @sdev: pointer to SCSI device + * + * Returns success + */ +static int ufshcd_slave_alloc(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + sdev->tagged_supported = 1; + + /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ + sdev->use_10_for_ms = 1; + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); + + /* allow SCSI layer to restart the device in case of errors */ + sdev->allow_restart = 1; + + /* + * Inform SCSI Midlayer that the LUN queue depth is same as the + * controller queue depth. If a LUN queue depth is less than the + * controller queue depth and if the LUN reports + * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted + * with scsi_adjust_queue_depth. + */ + scsi_activate_tcq(sdev, hba->nutrs); + return 0; +} + +/** + * ufshcd_slave_destroy - remove SCSI device configurations + * @sdev: pointer to SCSI device + */ +static void ufshcd_slave_destroy(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + scsi_deactivate_tcq(sdev, hba->nutrs); +} + +/** + * ufshcd_task_req_compl - handle task management request completion + * @hba: per adapter instance + * @index: index of the completed request + * @resp: task management service response + * + * Returns non-zero value on error, zero on success + */ +static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index, u8 *resp) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_rsp *task_rsp_upiup; + unsigned long flags; + int ocs_value; + int task_result; + + spin_lock_irqsave(hba->host->host_lock, flags); + + /* Clear completed tasks from outstanding_tasks */ + __clear_bit(index, &hba->outstanding_tasks); + + task_req_descp = hba->utmrdl_base_addr; + ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]); + + if (ocs_value == OCS_SUCCESS) { + task_rsp_upiup = (struct utp_upiu_task_rsp *) + task_req_descp[index].task_rsp_upiu; + task_result = be32_to_cpu(task_rsp_upiup->header.dword_1); + task_result = ((task_result & MASK_TASK_RESPONSE) >> 8); + if (resp) + *resp = (u8)task_result; + } else { + dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", + __func__, ocs_value); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return ocs_value; +} + +/** + * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with + * SAM_STAT_TASK_SET_FULL SCSI command status. + * @cmd: pointer to SCSI command + */ +static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba; + int i; + int lun_qdepth = 0; + + hba = shost_priv(cmd->device->host); + + /* + * LUN queue depth can be obtained by counting outstanding commands + * on the LUN. + */ + for (i = 0; i < hba->nutrs; i++) { + if (test_bit(i, &hba->outstanding_reqs)) { + + /* + * Check if the outstanding command belongs + * to the LUN which reported SAM_STAT_TASK_SET_FULL. + */ + if (cmd->device->lun == hba->lrb[i].lun) + lun_qdepth++; + } + } + + /* + * LUN queue depth will be total outstanding commands, except the + * command for which the LUN reported SAM_STAT_TASK_SET_FULL. + */ + scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1); +} + +/** + * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status + * @lrb: pointer to local reference block of completed command + * @scsi_status: SCSI command status + * + * Returns value base on SCSI command status + */ +static inline int +ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status) +{ + int result = 0; + + switch (scsi_status) { + case SAM_STAT_CHECK_CONDITION: + ufshcd_copy_sense_data(lrbp); + case SAM_STAT_GOOD: + result |= DID_OK << 16 | + COMMAND_COMPLETE << 8 | + scsi_status; + break; + case SAM_STAT_TASK_SET_FULL: + /* + * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue + * depth needs to be adjusted to the exact number of + * outstanding commands the LUN can handle at any given time. + */ + ufshcd_adjust_lun_qdepth(lrbp->cmd); + case SAM_STAT_BUSY: + case SAM_STAT_TASK_ABORTED: + ufshcd_copy_sense_data(lrbp); + result |= scsi_status; + break; + default: + result |= DID_ERROR << 16; + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_rsp_status - Get overall status of the response + * @hba: per adapter instance + * @lrb: pointer to local reference block of completed command + * + * Returns result of the command to notify SCSI midlayer + */ +static inline int +ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int result = 0; + int scsi_status; + int ocs; + + /* overall command status of utrd */ + ocs = ufshcd_get_tr_ocs(lrbp); + + switch (ocs) { + case OCS_SUCCESS: + result = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + + switch (result) { + case UPIU_TRANSACTION_RESPONSE: + /* + * get the response UPIU result to extract + * the SCSI command status + */ + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); + + /* + * get the result based on SCSI status response + * to notify the SCSI midlayer of the command status + */ + scsi_status = result & MASK_SCSI_STATUS; + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); + + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) + schedule_work(&hba->eeh_work); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + result = DID_ERROR << 16; + dev_err(hba->dev, + "Reject UPIU not fully implemented\n"); + break; + default: + result = DID_ERROR << 16; + dev_err(hba->dev, + "Unexpected request response code = %x\n", + result); + break; + } + break; + case OCS_ABORTED: + result |= DID_ABORT << 16; + break; + case OCS_INVALID_COMMAND_STATUS: + result |= DID_REQUEUE << 16; + break; + case OCS_INVALID_CMD_TABLE_ATTR: + case OCS_INVALID_PRDT_ATTR: + case OCS_MISMATCH_DATA_BUF_SIZE: + case OCS_MISMATCH_RESP_UPIU_SIZE: + case OCS_PEER_COMM_FAILURE: + case OCS_FATAL_ERROR: + default: + result |= DID_ERROR << 16; + dev_err(hba->dev, + "OCS error from controller = %x\n", ocs); + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_uic_cmd_compl - handle completion of uic command + * @hba: per adapter instance + * @intr_status: interrupt status generated by the controller + */ +static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) +{ + if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) { + hba->active_uic_cmd->argument2 |= + ufshcd_get_uic_cmd_result(hba); + hba->active_uic_cmd->argument3 = + ufshcd_get_dme_attr_val(hba); + complete(&hba->active_uic_cmd->done); + } + + if ((intr_status & UIC_POWER_MODE) && hba->pwr_done) + complete(hba->pwr_done); +} + +/** + * ufshcd_transfer_req_compl - handle SCSI and query command completion + * @hba: per adapter instance + */ +static void ufshcd_transfer_req_compl(struct ufs_hba *hba) +{ + struct ufshcd_lrb *lrbp; + struct scsi_cmnd *cmd; + unsigned long completed_reqs; + u32 tr_doorbell; + int result; + int index; + bool int_aggr_reset = false; + + tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + completed_reqs = tr_doorbell ^ hba->outstanding_reqs; + + for (index = 0; index < hba->nutrs; index++) { + if (test_bit(index, &completed_reqs)) { + lrbp = &hba->lrb[index]; + cmd = lrbp->cmd; + /* + * Don't skip resetting interrupt aggregation counters + * if a regular command is present. + */ + int_aggr_reset |= !lrbp->intr_cmd; + + if (cmd) { + result = ufshcd_transfer_rsp_status(hba, lrbp); + scsi_dma_unmap(cmd); + cmd->result = result; + /* Mark completed command as NULL in LRB */ + lrbp->cmd = NULL; + clear_bit_unlock(index, &hba->lrb_in_use); + /* Do not touch lrbp after scsi done */ + cmd->scsi_done(cmd); + } else if (lrbp->command_type == + UTP_CMD_TYPE_DEV_MANAGE) { + if (hba->dev_cmd.complete) + complete(hba->dev_cmd.complete); + } + } /* end of if */ + } /* end of for */ + + /* clear corresponding bits of completed commands */ + hba->outstanding_reqs ^= completed_reqs; + + /* we might have free'd some tags above */ + wake_up(&hba->dev_cmd.tag_wq); + + /* Reset interrupt aggregation counters */ + if (int_aggr_reset) + ufshcd_reset_intr_aggr(hba); +} + +/** + * ufshcd_disable_ee - disable exception event + * @hba: per-adapter instance + * @mask: exception event to disable + * + * Disables exception event in the device so that the EVENT_ALERT + * bit is not set. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_disable_ee(struct ufs_hba *hba, u16 mask) +{ + int err = 0; + u32 val; + + if (!(hba->ee_ctrl_mask & mask)) + goto out; + + val = hba->ee_ctrl_mask & ~mask; + val &= 0xFFFF; /* 2 bytes */ + err = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val); + if (!err) + hba->ee_ctrl_mask &= ~mask; +out: + return err; +} + +/** + * ufshcd_enable_ee - enable exception event + * @hba: per-adapter instance + * @mask: exception event to enable + * + * Enable corresponding exception event in the device to allow + * device to alert host in critical scenarios. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_enable_ee(struct ufs_hba *hba, u16 mask) +{ + int err = 0; + u32 val; + + if (hba->ee_ctrl_mask & mask) + goto out; + + val = hba->ee_ctrl_mask | mask; + val &= 0xFFFF; /* 2 bytes */ + err = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_EE_CONTROL, 0, 0, &val); + if (!err) + hba->ee_ctrl_mask |= mask; +out: + return err; +} + +/** + * ufshcd_enable_auto_bkops - Allow device managed BKOPS + * @hba: per-adapter instance + * + * Allow device to manage background operations on its own. Enabling + * this might lead to inconsistent latencies during normal data transfers + * as the device is allowed to manage its own way of handling background + * operations. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_enable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; + + if (hba->auto_bkops_enabled) + goto out; + + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to enable bkops %d\n", + __func__, err); + goto out; + } + + hba->auto_bkops_enabled = true; + + /* No need of URGENT_BKOPS exception from the device */ + err = ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) + dev_err(hba->dev, "%s: failed to disable exception event %d\n", + __func__, err); +out: + return err; +} + +/** + * ufshcd_disable_auto_bkops - block device in doing background operations + * @hba: per-adapter instance + * + * Disabling background operations improves command response latency but + * has drawback of device moving into critical state where the device is + * not-operable. Make sure to call ufshcd_enable_auto_bkops() whenever the + * host is idle so that BKOPS are managed effectively without any negative + * impacts. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_disable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; + + if (!hba->auto_bkops_enabled) + goto out; + + /* + * If host assisted BKOPs is to be enabled, make sure + * urgent bkops exception is allowed. + */ + err = ufshcd_enable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) { + dev_err(hba->dev, "%s: failed to enable exception event %d\n", + __func__, err); + goto out; + } + + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to disable bkops %d\n", + __func__, err); + ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + goto out; + } + + hba->auto_bkops_enabled = false; +out: + return err; +} + +/** + * ufshcd_force_reset_auto_bkops - force enable of auto bkops + * @hba: per adapter instance + * + * After a device reset the device may toggle the BKOPS_EN flag + * to default value. The s/w tracking variables should be updated + * as well. Do this by forcing enable of auto bkops. + */ +static void ufshcd_force_reset_auto_bkops(struct ufs_hba *hba) +{ + hba->auto_bkops_enabled = false; + hba->ee_ctrl_mask |= MASK_EE_URGENT_BKOPS; + ufshcd_enable_auto_bkops(hba); +} + +static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_BKOPS_STATUS, 0, 0, status); +} + +/** + * ufshcd_urgent_bkops - handle urgent bkops exception event + * @hba: per-adapter instance + * + * Enable fBackgroundOpsEn flag in the device to permit background + * operations. + */ +static int ufshcd_urgent_bkops(struct ufs_hba *hba) +{ + int err; + u32 status = 0; + + err = ufshcd_get_bkops_status(hba, &status); + if (err) { + dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", + __func__, err); + goto out; + } + + status = status & 0xF; + + /* handle only if status indicates performance impact or critical */ + if (status >= BKOPS_STATUS_PERF_IMPACT) + err = ufshcd_enable_auto_bkops(hba); +out: + return err; +} + +static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_EE_STATUS, 0, 0, status); +} + +/** + * ufshcd_exception_event_handler - handle exceptions raised by device + * @work: pointer to work data + * + * Read bExceptionEventStatus attribute from the device and handle the + * exception event accordingly. + */ +static void ufshcd_exception_event_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + int err; + u32 status = 0; + hba = container_of(work, struct ufs_hba, eeh_work); + + pm_runtime_get_sync(hba->dev); + err = ufshcd_get_ee_status(hba, &status); + if (err) { + dev_err(hba->dev, "%s: failed to get exception status %d\n", + __func__, err); + goto out; + } + + status &= hba->ee_ctrl_mask; + if (status & MASK_EE_URGENT_BKOPS) { + err = ufshcd_urgent_bkops(hba); + if (err) + dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n", + __func__, err); + } +out: + pm_runtime_put_sync(hba->dev); + return; +} + +/** + * ufshcd_err_handler - handle UFS errors that require s/w attention + * @work: pointer to work structure + */ +static void ufshcd_err_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + unsigned long flags; + u32 err_xfer = 0; + u32 err_tm = 0; + int err = 0; + int tag; + + hba = container_of(work, struct ufs_hba, eh_work); + + pm_runtime_get_sync(hba->dev); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->ufshcd_state == UFSHCD_STATE_RESET) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + goto out; + } + + hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_set_eh_in_progress(hba); + + /* Complete requests that have door-bell cleared by h/w */ + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Clear pending transfer requests */ + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) + if (ufshcd_clear_cmd(hba, tag)) + err_xfer |= 1 << tag; + + /* Clear pending task management requests */ + for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) + if (ufshcd_clear_tm_cmd(hba, tag)) + err_tm |= 1 << tag; + + /* Complete the requests that are cleared by s/w */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Fatal errors need reset */ + if (err_xfer || err_tm || (hba->saved_err & INT_FATAL_ERRORS) || + ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR))) { + err = ufshcd_reset_and_restore(hba); + if (err) { + dev_err(hba->dev, "%s: reset and restore failed\n", + __func__); + hba->ufshcd_state = UFSHCD_STATE_ERROR; + } + /* + * Inform scsi mid-layer that we did reset and allow to handle + * Unit Attention properly. + */ + scsi_report_bus_reset(hba->host, 0); + hba->saved_err = 0; + hba->saved_uic_err = 0; + } + ufshcd_clear_eh_in_progress(hba); + +out: + scsi_unblock_requests(hba->host); + pm_runtime_put_sync(hba->dev); +} + +/** + * ufshcd_update_uic_error - check and set fatal UIC error flags. + * @hba: per-adapter instance + */ +static void ufshcd_update_uic_error(struct ufs_hba *hba) +{ + u32 reg; + + /* PA_INIT_ERROR is fatal and needs UIC reset */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER); + if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) + hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR; + + /* UIC NL/TL/DME errors needs software retry */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER); + if (reg) + hba->uic_error |= UFSHCD_UIC_NL_ERROR; + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER); + if (reg) + hba->uic_error |= UFSHCD_UIC_TL_ERROR; + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME); + if (reg) + hba->uic_error |= UFSHCD_UIC_DME_ERROR; + + dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n", + __func__, hba->uic_error); +} + +/** + * ufshcd_check_errors - Check for errors that need s/w attention + * @hba: per-adapter instance + */ +static void ufshcd_check_errors(struct ufs_hba *hba) +{ + bool queue_eh_work = false; + + if (hba->errors & INT_FATAL_ERRORS) + queue_eh_work = true; + + if (hba->errors & UIC_ERROR) { + hba->uic_error = 0; + ufshcd_update_uic_error(hba); + if (hba->uic_error) + queue_eh_work = true; + } + + if (queue_eh_work) { + /* handle fatal errors only when link is functional */ + if (hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL) { + /* block commands from scsi mid-layer */ + scsi_block_requests(hba->host); + + /* transfer error masks to sticky bits */ + hba->saved_err |= hba->errors; + hba->saved_uic_err |= hba->uic_error; + + hba->ufshcd_state = UFSHCD_STATE_ERROR; + schedule_work(&hba->eh_work); + } + } + /* + * if (!queue_eh_work) - + * Other errors are either non-fatal where host recovers + * itself without s/w intervention or errors that will be + * handled by the SCSI core layer. + */ +} + +/** + * ufshcd_tmc_handler - handle task management function completion + * @hba: per adapter instance + */ +static void ufshcd_tmc_handler(struct ufs_hba *hba) +{ + u32 tm_doorbell; + + tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); + hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks; + wake_up(&hba->tm_wq); +} + +/** + * ufshcd_sl_intr - Interrupt service routine + * @hba: per adapter instance + * @intr_status: contains interrupts generated by the controller + */ +static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) +{ + hba->errors = UFSHCD_ERROR_MASK & intr_status; + if (hba->errors) + ufshcd_check_errors(hba); + + if (intr_status & UFSHCD_UIC_MASK) + ufshcd_uic_cmd_compl(hba, intr_status); + + if (intr_status & UTP_TASK_REQ_COMPL) + ufshcd_tmc_handler(hba); + + if (intr_status & UTP_TRANSFER_REQ_COMPL) + ufshcd_transfer_req_compl(hba); +} + +/** + * ufshcd_intr - Main interrupt service routine + * @irq: irq number + * @__hba: pointer to adapter instance + * + * Returns IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_intr(int irq, void *__hba) +{ + u32 intr_status; + irqreturn_t retval = IRQ_NONE; + struct ufs_hba *hba = __hba; + + spin_lock(hba->host->host_lock); + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + + if (intr_status) { + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + ufshcd_sl_intr(hba, intr_status); + retval = IRQ_HANDLED; + } + spin_unlock(hba->host->host_lock); + return retval; +} + +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) +{ + int err = 0; + u32 mask = 1 << tag; + unsigned long flags; + + if (!test_bit(tag, &hba->outstanding_tasks)) + goto out; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* poll for max. 1 sec to clear door bell register by h/w */ + err = ufshcd_wait_for_register(hba, + REG_UTP_TASK_REQ_DOOR_BELL, + mask, 0, 1000, 1000); +out: + return err; +} + +/** + * ufshcd_issue_tm_cmd - issues task management commands to controller + * @hba: per adapter instance + * @lun_id: LUN ID to which TM command is sent + * @task_id: task ID to which the TM command is applicable + * @tm_function: task management function opcode + * @tm_response: task management service response return value + * + * Returns non-zero value on error, zero on success. + */ +static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id, + u8 tm_function, u8 *tm_response) +{ + struct utp_task_req_desc *task_req_descp; + struct utp_upiu_task_req *task_req_upiup; + struct Scsi_Host *host; + unsigned long flags; + int free_slot; + int err; + int task_tag; + + host = hba->host; + + /* + * Get free slot, sleep if slots are unavailable. + * Even though we use wait_event() which sleeps indefinitely, + * the maximum wait time is bounded by %TM_CMD_TIMEOUT. + */ + wait_event(hba->tm_tag_wq, ufshcd_get_tm_free_slot(hba, &free_slot)); + + spin_lock_irqsave(host->host_lock, flags); + task_req_descp = hba->utmrdl_base_addr; + task_req_descp += free_slot; + + /* Configure task request descriptor */ + task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD); + task_req_descp->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* Configure task request UPIU */ + task_req_upiup = + (struct utp_upiu_task_req *) task_req_descp->task_req_upiu; + task_tag = hba->nutrs + free_slot; + task_req_upiup->header.dword_0 = + UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0, + lun_id, task_tag); + task_req_upiup->header.dword_1 = + UPIU_HEADER_DWORD(0, tm_function, 0, 0); + + task_req_upiup->input_param1 = cpu_to_be32(lun_id); + task_req_upiup->input_param2 = cpu_to_be32(task_id); + + /* send command to the controller */ + __set_bit(free_slot, &hba->outstanding_tasks); + ufshcd_writel(hba, 1 << free_slot, REG_UTP_TASK_REQ_DOOR_BELL); + + spin_unlock_irqrestore(host->host_lock, flags); + + /* wait until the task management command is completed */ + err = wait_event_timeout(hba->tm_wq, + test_bit(free_slot, &hba->tm_condition), + msecs_to_jiffies(TM_CMD_TIMEOUT)); + if (!err) { + dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n", + __func__, tm_function); + if (ufshcd_clear_tm_cmd(hba, free_slot)) + dev_WARN(hba->dev, "%s: unable clear tm cmd (slot %d) after timeout\n", + __func__, free_slot); + err = -ETIMEDOUT; + } else { + err = ufshcd_task_req_compl(hba, free_slot, tm_response); + } + + clear_bit(free_slot, &hba->tm_condition); + ufshcd_put_tm_slot(hba, free_slot); + wake_up(&hba->tm_tag_wq); + + return err; +} + +/** + * ufshcd_eh_device_reset_handler - device reset handler registered to + * scsi layer. + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned int tag; + u32 pos; + int err; + u8 resp = 0xF; + struct ufshcd_lrb *lrbp; + unsigned long flags; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + lrbp = &hba->lrb[tag]; + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, 0, UFS_LOGICAL_RESET, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) + err = resp; + goto out; + } + + /* clear the commands that were pending for corresponding LUN */ + for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) { + if (hba->lrb[pos].lun == lrbp->lun) { + err = ufshcd_clear_cmd(hba, pos); + if (err) + break; + } + } + spin_lock_irqsave(host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + spin_unlock_irqrestore(host->host_lock, flags); +out: + if (!err) { + err = SUCCESS; + } else { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + err = FAILED; + } + return err; +} + +/** + * ufshcd_abort - abort a specific command + * @cmd: SCSI command pointer + * + * Abort the pending command in device by sending UFS_ABORT_TASK task management + * command, and in host controller by clearing the door-bell register. There can + * be race between controller sending the command to the device while abort is + * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is + * really issued and then try to abort it. + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + unsigned long flags; + unsigned int tag; + int err = 0; + int poll_cnt; + u8 resp = 0xF; + struct ufshcd_lrb *lrbp; + + host = cmd->device->host; + hba = shost_priv(host); + tag = cmd->request->tag; + + /* If command is already aborted/completed, return SUCCESS */ + if (!(test_bit(tag, &hba->outstanding_reqs))) + goto out; + + lrbp = &hba->lrb[tag]; + for (poll_cnt = 100; poll_cnt; poll_cnt--) { + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_QUERY_TASK, &resp); + if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) { + /* cmd pending in the device */ + break; + } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + u32 reg; + + /* + * cmd not pending in the device, check if it is + * in transition. + */ + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + if (reg & (1 << tag)) { + /* sleep for max. 200us to stabilize */ + usleep_range(100, 200); + continue; + } + /* command completed already */ + goto out; + } else { + if (!err) + err = resp; /* service response error */ + goto out; + } + } + + if (!poll_cnt) { + err = -EBUSY; + goto out; + } + + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_ABORT_TASK, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) + err = resp; /* service response error */ + goto out; + } + + err = ufshcd_clear_cmd(hba, tag); + if (err) + goto out; + + scsi_dma_unmap(cmd); + + spin_lock_irqsave(host->host_lock, flags); + __clear_bit(tag, &hba->outstanding_reqs); + hba->lrb[tag].cmd = NULL; + spin_unlock_irqrestore(host->host_lock, flags); + + clear_bit_unlock(tag, &hba->lrb_in_use); + wake_up(&hba->dev_cmd.tag_wq); +out: + if (!err) { + err = SUCCESS; + } else { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + err = FAILED; + } + + return err; +} + +/** + * ufshcd_host_reset_and_restore - reset and restore host controller + * @hba: per-adapter instance + * + * Note that host controller reset may issue DME_RESET to + * local and remote (device) Uni-Pro stack and the attributes + * are reset to default state. + * + * Returns zero on success, non-zero on failure + */ +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) +{ + int err; + async_cookie_t cookie; + unsigned long flags; + + /* Reset the host controller */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_hba_stop(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_hba_enable(hba); + if (err) + goto out; + + /* Establish the link again and restore the device */ + cookie = async_schedule(ufshcd_async_scan, hba); + /* wait for async scan to be completed */ + async_synchronize_cookie(++cookie); + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) + err = -EIO; +out: + if (err) + dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); + + return err; +} + +/** + * ufshcd_reset_and_restore - reset and re-initialize host/device + * @hba: per-adapter instance + * + * Reset and recover device, host and re-establish link. This + * is helpful to recover the communication in fatal error conditions. + * + * Returns zero on success, non-zero on failure + */ +static int ufshcd_reset_and_restore(struct ufs_hba *hba) +{ + int err = 0; + unsigned long flags; + + err = ufshcd_host_reset_and_restore(hba); + + /* + * After reset the door-bell might be cleared, complete + * outstanding requests in s/w here. + */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return err; +} + +/** + * ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer + * @cmd - SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) +{ + int err; + unsigned long flags; + struct ufs_hba *hba; + + hba = shost_priv(cmd->device->host); + + /* + * Check if there is any race with fatal error handling. + * If so, wait for it to complete. Even though fatal error + * handling does reset and restore in some cases, don't assume + * anything out of it. We are just avoiding race here. + */ + do { + spin_lock_irqsave(hba->host->host_lock, flags); + if (!(work_pending(&hba->eh_work) || + hba->ufshcd_state == UFSHCD_STATE_RESET)) + break; + spin_unlock_irqrestore(hba->host->host_lock, flags); + dev_dbg(hba->dev, "%s: reset in progress\n", __func__); + flush_work(&hba->eh_work); + } while (1); + + hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_set_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_reset_and_restore(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (!err) { + err = SUCCESS; + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + } else { + err = FAILED; + hba->ufshcd_state = UFSHCD_STATE_ERROR; + } + ufshcd_clear_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return err; +} + +/** + * ufshcd_async_scan - asynchronous execution for link startup + * @data: data pointer to pass to this function + * @cookie: cookie data + */ +static void ufshcd_async_scan(void *data, async_cookie_t cookie) +{ + struct ufs_hba *hba = (struct ufs_hba *)data; + int ret; + + ret = ufshcd_link_startup(hba); + if (ret) + goto out; + + ufshcd_config_max_pwr_mode(hba); + + ret = ufshcd_verify_dev_init(hba); + if (ret) + goto out; + + ret = ufshcd_complete_dev_init(hba); + if (ret) + goto out; + + ufshcd_force_reset_auto_bkops(hba); + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + + /* If we are in error handling context no need to scan the host */ + if (!ufshcd_eh_in_progress(hba)) { + scsi_scan_host(hba->host); + pm_runtime_put_sync(hba->dev); + } +out: + return; +} + +static struct scsi_host_template ufshcd_driver_template = { + .module = THIS_MODULE, + .name = UFSHCD, + .proc_name = UFSHCD, + .queuecommand = ufshcd_queuecommand, + .slave_alloc = ufshcd_slave_alloc, + .slave_destroy = ufshcd_slave_destroy, + .eh_abort_handler = ufshcd_abort, + .eh_device_reset_handler = ufshcd_eh_device_reset_handler, + .eh_host_reset_handler = ufshcd_eh_host_reset_handler, + .this_id = -1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = UFSHCD_CMD_PER_LUN, + .can_queue = UFSHCD_CAN_QUEUE, +}; + +/** + * ufshcd_suspend - suspend power management function + * @hba: per adapter instance + * @state: power state + * + * Returns -ENOSYS + */ +int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state) +{ + /* + * TODO: + * 1. Block SCSI requests from SCSI midlayer + * 2. Change the internal driver state to non operational + * 3. Set UTRLRSR and UTMRLRSR bits to zero + * 4. Wait until outstanding commands are completed + * 5. Set HCE to zero to send the UFS host controller to reset state + */ + + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(ufshcd_suspend); + +/** + * ufshcd_resume - resume power management function + * @hba: per adapter instance + * + * Returns -ENOSYS + */ +int ufshcd_resume(struct ufs_hba *hba) +{ + /* + * TODO: + * 1. Set HCE to 1, to start the UFS host controller + * initialization process + * 2. Set UTRLRSR and UTMRLRSR bits to 1 + * 3. Change the internal driver state to operational + * 4. Unblock SCSI requests from SCSI midlayer + */ + + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(ufshcd_resume); + +int ufshcd_runtime_suspend(struct ufs_hba *hba) +{ + if (!hba) + return 0; + + /* + * The device is idle with no requests in the queue, + * allow background operations. + */ + return ufshcd_enable_auto_bkops(hba); +} +EXPORT_SYMBOL(ufshcd_runtime_suspend); + +int ufshcd_runtime_resume(struct ufs_hba *hba) +{ + if (!hba) + return 0; + + return ufshcd_disable_auto_bkops(hba); +} +EXPORT_SYMBOL(ufshcd_runtime_resume); + +int ufshcd_runtime_idle(struct ufs_hba *hba) +{ + return 0; +} +EXPORT_SYMBOL(ufshcd_runtime_idle); + +/** + * ufshcd_remove - de-allocate SCSI host and host memory space + * data structure memory + * @hba - per adapter instance + */ +void ufshcd_remove(struct ufs_hba *hba) +{ + scsi_remove_host(hba->host); + /* disable interrupts */ + ufshcd_disable_intr(hba, hba->intr_mask); + ufshcd_hba_stop(hba); + + scsi_host_put(hba->host); +} +EXPORT_SYMBOL_GPL(ufshcd_remove); + +/** + * ufshcd_init - Driver initialization routine + * @dev: pointer to device handle + * @hba_handle: driver private handle + * @mmio_base: base register address + * @irq: Interrupt line of device + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle, + void __iomem *mmio_base, unsigned int irq) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + int err; + + if (!dev) { + dev_err(dev, + "Invalid memory reference for dev is NULL\n"); + err = -ENODEV; + goto out_error; + } + + if (!mmio_base) { + dev_err(dev, + "Invalid memory reference for mmio_base is NULL\n"); + err = -ENODEV; + goto out_error; + } + + host = scsi_host_alloc(&ufshcd_driver_template, + sizeof(struct ufs_hba)); + if (!host) { + dev_err(dev, "scsi_host_alloc failed\n"); + err = -ENOMEM; + goto out_error; + } + hba = shost_priv(host); + hba->host = host; + hba->dev = dev; + hba->mmio_base = mmio_base; + hba->irq = irq; + + /* Read capabilities registers */ + ufshcd_hba_capabilities(hba); + + /* Get UFS version supported by the controller */ + hba->ufs_version = ufshcd_get_ufs_version(hba); + + /* Get Interrupt bit mask per version */ + hba->intr_mask = ufshcd_get_intr_mask(hba); + + /* Allocate memory for host memory space */ + err = ufshcd_memory_alloc(hba); + if (err) { + dev_err(hba->dev, "Memory allocation failed\n"); + goto out_disable; + } + + /* Configure LRB */ + ufshcd_host_memory_configure(hba); + + host->can_queue = hba->nutrs; + host->cmd_per_lun = hba->nutrs; + host->max_id = UFSHCD_MAX_ID; + host->max_lun = UFSHCD_MAX_LUNS; + host->max_channel = UFSHCD_MAX_CHANNEL; + host->unique_id = host->host_no; + host->max_cmd_len = MAX_CDB_SIZE; + + /* Initailize wait queue for task management */ + init_waitqueue_head(&hba->tm_wq); + init_waitqueue_head(&hba->tm_tag_wq); + + /* Initialize work queues */ + INIT_WORK(&hba->eh_work, ufshcd_err_handler); + INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); + + /* Initialize UIC command mutex */ + mutex_init(&hba->uic_cmd_mutex); + + /* Initialize mutex for device management commands */ + mutex_init(&hba->dev_cmd.lock); + + /* Initialize device management tag acquire wait queue */ + init_waitqueue_head(&hba->dev_cmd.tag_wq); + + /* IRQ registration */ + err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + if (err) { + dev_err(hba->dev, "request irq failed\n"); + goto out_disable; + } + + /* Enable SCSI tag mapping */ + err = scsi_init_shared_tag_map(host, host->can_queue); + if (err) { + dev_err(hba->dev, "init shared queue failed\n"); + goto out_disable; + } + + err = scsi_add_host(host, hba->dev); + if (err) { + dev_err(hba->dev, "scsi_add_host failed\n"); + goto out_disable; + } + + /* Host controller enable */ + err = ufshcd_hba_enable(hba); + if (err) { + dev_err(hba->dev, "Host controller enable failed\n"); + goto out_remove_scsi_host; + } + + *hba_handle = hba; + + /* Hold auto suspend until async scan completes */ + pm_runtime_get_sync(dev); + + async_schedule(ufshcd_async_scan, hba); + + return 0; + +out_remove_scsi_host: + scsi_remove_host(hba->host); +out_disable: + scsi_host_put(host); +out_error: + return err; +} +EXPORT_SYMBOL_GPL(ufshcd_init); + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); +MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("Generic UFS host controller driver Core"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h new file mode 100644 index 00000000000..acf318e338e --- /dev/null +++ b/drivers/scsi/ufs/ufshcd.h @@ -0,0 +1,334 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshcd.h + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#ifndef _UFSHCD_H +#define _UFSHCD_H + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/wait.h> +#include <linux/bitops.h> +#include <linux/pm_runtime.h> +#include <linux/clk.h> +#include <linux/completion.h> + +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_eh.h> + +#include "ufs.h" +#include "ufshci.h" + +#define UFSHCD "ufshcd" +#define UFSHCD_DRIVER_VERSION "0.2" + +enum dev_cmd_type { + DEV_CMD_TYPE_NOP = 0x0, + DEV_CMD_TYPE_QUERY = 0x1, +}; + +/** + * struct uic_command - UIC command structure + * @command: UIC command + * @argument1: UIC command argument 1 + * @argument2: UIC command argument 2 + * @argument3: UIC command argument 3 + * @cmd_active: Indicate if UIC command is outstanding + * @result: UIC command result + * @done: UIC command completion + */ +struct uic_command { + u32 command; + u32 argument1; + u32 argument2; + u32 argument3; + int cmd_active; + int result; + struct completion done; +}; + +/** + * struct ufshcd_lrb - local reference block + * @utr_descriptor_ptr: UTRD address of the command + * @ucd_req_ptr: UCD address of the command + * @ucd_rsp_ptr: Response UPIU address for this command + * @ucd_prdt_ptr: PRDT address of the command + * @cmd: pointer to SCSI command + * @sense_buffer: pointer to sense buffer address of the SCSI command + * @sense_bufflen: Length of the sense buffer + * @scsi_status: SCSI status of the command + * @command_type: SCSI, UFS, Query. + * @task_tag: Task tag of the command + * @lun: LUN of the command + * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation) + */ +struct ufshcd_lrb { + struct utp_transfer_req_desc *utr_descriptor_ptr; + struct utp_upiu_req *ucd_req_ptr; + struct utp_upiu_rsp *ucd_rsp_ptr; + struct ufshcd_sg_entry *ucd_prdt_ptr; + + struct scsi_cmnd *cmd; + u8 *sense_buffer; + unsigned int sense_bufflen; + int scsi_status; + + int command_type; + int task_tag; + unsigned int lun; + bool intr_cmd; +}; + +/** + * struct ufs_query - holds relevent data structures for query request + * @request: request upiu and function + * @descriptor: buffer for sending/receiving descriptor + * @response: response upiu and response + */ +struct ufs_query { + struct ufs_query_req request; + u8 *descriptor; + struct ufs_query_res response; +}; + +/** + * struct ufs_dev_cmd - all assosiated fields with device management commands + * @type: device management command type - Query, NOP OUT + * @lock: lock to allow one command at a time + * @complete: internal commands completion + * @tag_wq: wait queue until free command slot is available + */ +struct ufs_dev_cmd { + enum dev_cmd_type type; + struct mutex lock; + struct completion *complete; + wait_queue_head_t tag_wq; + struct ufs_query query; +}; + +/** + * struct ufs_hba - per adapter private structure + * @mmio_base: UFSHCI base register address + * @ucdl_base_addr: UFS Command Descriptor base address + * @utrdl_base_addr: UTP Transfer Request Descriptor base address + * @utmrdl_base_addr: UTP Task Management Descriptor base address + * @ucdl_dma_addr: UFS Command Descriptor DMA address + * @utrdl_dma_addr: UTRDL DMA address + * @utmrdl_dma_addr: UTMRDL DMA address + * @host: Scsi_Host instance of the driver + * @dev: device handle + * @lrb: local reference block + * @lrb_in_use: lrb in use + * @outstanding_tasks: Bits representing outstanding task requests + * @outstanding_reqs: Bits representing outstanding transfer requests + * @capabilities: UFS Controller Capabilities + * @nutrs: Transfer Request Queue depth supported by controller + * @nutmrs: Task Management Queue depth supported by controller + * @ufs_version: UFS Version to which controller complies + * @irq: Irq number of the controller + * @active_uic_cmd: handle of active UIC command + * @uic_cmd_mutex: mutex for uic command + * @tm_wq: wait queue for task management + * @tm_tag_wq: wait queue for free task management slots + * @tm_slots_in_use: bit map of task management request slots in use + * @pwr_done: completion for power mode change + * @tm_condition: condition variable for task management + * @ufshcd_state: UFSHCD states + * @eh_flags: Error handling flags + * @intr_mask: Interrupt Mask Bits + * @ee_ctrl_mask: Exception event control mask + * @eh_work: Worker to handle UFS errors that require s/w attention + * @eeh_work: Worker to handle exception events + * @errors: HBA errors + * @uic_error: UFS interconnect layer error status + * @saved_err: sticky error mask + * @saved_uic_err: sticky UIC error mask + * @dev_cmd: ufs device management command information + * @auto_bkops_enabled: to track whether bkops is enabled in device + */ +struct ufs_hba { + void __iomem *mmio_base; + + /* Virtual memory reference */ + struct utp_transfer_cmd_desc *ucdl_base_addr; + struct utp_transfer_req_desc *utrdl_base_addr; + struct utp_task_req_desc *utmrdl_base_addr; + + /* DMA memory reference */ + dma_addr_t ucdl_dma_addr; + dma_addr_t utrdl_dma_addr; + dma_addr_t utmrdl_dma_addr; + + struct Scsi_Host *host; + struct device *dev; + + struct ufshcd_lrb *lrb; + unsigned long lrb_in_use; + + unsigned long outstanding_tasks; + unsigned long outstanding_reqs; + + u32 capabilities; + int nutrs; + int nutmrs; + u32 ufs_version; + unsigned int irq; + + struct uic_command *active_uic_cmd; + struct mutex uic_cmd_mutex; + + wait_queue_head_t tm_wq; + wait_queue_head_t tm_tag_wq; + unsigned long tm_condition; + unsigned long tm_slots_in_use; + + struct completion *pwr_done; + + u32 ufshcd_state; + u32 eh_flags; + u32 intr_mask; + u16 ee_ctrl_mask; + + /* Work Queues */ + struct work_struct eh_work; + struct work_struct eeh_work; + + /* HBA Errors */ + u32 errors; + u32 uic_error; + u32 saved_err; + u32 saved_uic_err; + + /* Device management request data */ + struct ufs_dev_cmd dev_cmd; + + bool auto_bkops_enabled; +}; + +#define ufshcd_writel(hba, val, reg) \ + writel((val), (hba)->mmio_base + (reg)) +#define ufshcd_readl(hba, reg) \ + readl((hba)->mmio_base + (reg)) + +int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * , + unsigned int); +void ufshcd_remove(struct ufs_hba *); + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +static inline void ufshcd_hba_stop(struct ufs_hba *hba) +{ + ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); +} + +static inline void check_upiu_size(void) +{ + BUILD_BUG_ON(ALIGNED_UPIU_SIZE < + GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE); +} + +extern int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state); +extern int ufshcd_resume(struct ufs_hba *hba); +extern int ufshcd_runtime_suspend(struct ufs_hba *hba); +extern int ufshcd_runtime_resume(struct ufs_hba *hba); +extern int ufshcd_runtime_idle(struct ufs_hba *hba); +extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer); +extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer); + +/* UIC command interfaces for DME primitives */ +#define DME_LOCAL 0 +#define DME_PEER 1 +#define ATTR_SET_NOR 0 /* NORMAL */ +#define ATTR_SET_ST 1 /* STATIC */ + +static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, + mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR, + mib_val, DME_PEER); +} + +static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel, + u32 mib_val) +{ + return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST, + mib_val, DME_PEER); +} + +static inline int ufshcd_dme_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL); +} + +static inline int ufshcd_dme_peer_get(struct ufs_hba *hba, + u32 attr_sel, u32 *mib_val) +{ + return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER); +} + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h new file mode 100644 index 00000000000..9abc7e32b43 --- /dev/null +++ b/drivers/scsi/ufs/ufshci.h @@ -0,0 +1,385 @@ +/* + * Universal Flash Storage Host controller driver + * + * This code is based on drivers/scsi/ufs/ufshci.h + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#ifndef _UFSHCI_H +#define _UFSHCI_H + +enum { + TASK_REQ_UPIU_SIZE_DWORDS = 8, + TASK_RSP_UPIU_SIZE_DWORDS = 8, + ALIGNED_UPIU_SIZE = 512, +}; + +/* UFSHCI Registers */ +enum { + REG_CONTROLLER_CAPABILITIES = 0x00, + REG_UFS_VERSION = 0x08, + REG_CONTROLLER_DEV_ID = 0x10, + REG_CONTROLLER_PROD_ID = 0x14, + REG_INTERRUPT_STATUS = 0x20, + REG_INTERRUPT_ENABLE = 0x24, + REG_CONTROLLER_STATUS = 0x30, + REG_CONTROLLER_ENABLE = 0x34, + REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38, + REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C, + REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40, + REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44, + REG_UIC_ERROR_CODE_DME = 0x48, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C, + REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50, + REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54, + REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58, + REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60, + REG_UTP_TASK_REQ_LIST_BASE_L = 0x70, + REG_UTP_TASK_REQ_LIST_BASE_H = 0x74, + REG_UTP_TASK_REQ_DOOR_BELL = 0x78, + REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C, + REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80, + REG_UIC_COMMAND = 0x90, + REG_UIC_COMMAND_ARG_1 = 0x94, + REG_UIC_COMMAND_ARG_2 = 0x98, + REG_UIC_COMMAND_ARG_3 = 0x9C, +}; + +/* Controller capability masks */ +enum { + MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F, + MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000, + MASK_64_ADDRESSING_SUPPORT = 0x01000000, + MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000, + MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000, +}; + +/* UFS Version 08h */ +#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0) +#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16) + +/* Controller UFSHCI version */ +enum { + UFSHCI_VERSION_10 = 0x00010000, + UFSHCI_VERSION_11 = 0x00010100, +}; + +/* + * HCDDID - Host Controller Identification Descriptor + * - Device ID and Device Class 10h + */ +#define DEVICE_CLASS UFS_MASK(0xFFFF, 0) +#define DEVICE_ID UFS_MASK(0xFF, 24) + +/* + * HCPMID - Host Controller Identification Descriptor + * - Product/Manufacturer ID 14h + */ +#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0) +#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16) + +#define UFS_BIT(x) (1L << (x)) + +#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0) +#define UIC_DME_END_PT_RESET UFS_BIT(1) +#define UIC_ERROR UFS_BIT(2) +#define UIC_TEST_MODE UFS_BIT(3) +#define UIC_POWER_MODE UFS_BIT(4) +#define UIC_HIBERNATE_EXIT UFS_BIT(5) +#define UIC_HIBERNATE_ENTER UFS_BIT(6) +#define UIC_LINK_LOST UFS_BIT(7) +#define UIC_LINK_STARTUP UFS_BIT(8) +#define UTP_TASK_REQ_COMPL UFS_BIT(9) +#define UIC_COMMAND_COMPL UFS_BIT(10) +#define DEVICE_FATAL_ERROR UFS_BIT(11) +#define CONTROLLER_FATAL_ERROR UFS_BIT(16) +#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17) + +#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL |\ + UIC_POWER_MODE) + +#define UFSHCD_ERROR_MASK (UIC_ERROR |\ + DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\ + CONTROLLER_FATAL_ERROR |\ + SYSTEM_BUS_FATAL_ERROR) + +/* HCS - Host Controller Status 30h */ +#define DEVICE_PRESENT UFS_BIT(0) +#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1) +#define UTP_TASK_REQ_LIST_READY UFS_BIT(2) +#define UIC_COMMAND_READY UFS_BIT(3) +#define HOST_ERROR_INDICATOR UFS_BIT(4) +#define DEVICE_ERROR_INDICATOR UFS_BIT(5) +#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8) + +enum { + PWR_OK = 0x0, + PWR_LOCAL = 0x01, + PWR_REMOTE = 0x02, + PWR_BUSY = 0x03, + PWR_ERROR_CAP = 0x04, + PWR_FATAL_ERROR = 0x05, +}; + +/* HCE - Host Controller Enable 34h */ +#define CONTROLLER_ENABLE UFS_BIT(0) +#define CONTROLLER_DISABLE 0x0 + +/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */ +#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31) +#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F + +/* UECDL - Host UIC Error Code Data Link Layer 3Ch */ +#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31) +#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF +#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000 + +/* UECN - Host UIC Error Code Network Layer 40h */ +#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31) +#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7 + +/* UECT - Host UIC Error Code Transport Layer 44h */ +#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31) +#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F + +/* UECDME - Host UIC Error Code DME 48h */ +#define UIC_DME_ERROR UFS_BIT(31) +#define UIC_DME_ERROR_CODE_MASK 0x1 + +#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF +#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8) +#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16) +#define INT_AGGR_STATUS_BIT UFS_BIT(20) +#define INT_AGGR_PARAM_WRITE UFS_BIT(24) +#define INT_AGGR_ENABLE UFS_BIT(31) + +/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */ +#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */ +#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0) + +/* UICCMD - UIC Command */ +#define COMMAND_OPCODE_MASK 0xFF +#define GEN_SELECTOR_INDEX_MASK 0xFFFF + +#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16) +#define RESET_LEVEL 0xFF + +#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16) +#define CONFIG_RESULT_CODE_MASK 0xFF +#define GENERIC_ERROR_CODE_MASK 0xFF + +#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\ + ((sel) & 0xFFFF)) +#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0) +#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16) +#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) + +/* UIC Commands */ +enum { + UIC_CMD_DME_GET = 0x01, + UIC_CMD_DME_SET = 0x02, + UIC_CMD_DME_PEER_GET = 0x03, + UIC_CMD_DME_PEER_SET = 0x04, + UIC_CMD_DME_POWERON = 0x10, + UIC_CMD_DME_POWEROFF = 0x11, + UIC_CMD_DME_ENABLE = 0x12, + UIC_CMD_DME_RESET = 0x14, + UIC_CMD_DME_END_PT_RST = 0x15, + UIC_CMD_DME_LINK_STARTUP = 0x16, + UIC_CMD_DME_HIBER_ENTER = 0x17, + UIC_CMD_DME_HIBER_EXIT = 0x18, + UIC_CMD_DME_TEST_MODE = 0x1A, +}; + +/* UIC Config result code / Generic error code */ +enum { + UIC_CMD_RESULT_SUCCESS = 0x00, + UIC_CMD_RESULT_INVALID_ATTR = 0x01, + UIC_CMD_RESULT_FAILURE = 0x01, + UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02, + UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03, + UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04, + UIC_CMD_RESULT_BAD_INDEX = 0x05, + UIC_CMD_RESULT_LOCKED_ATTR = 0x06, + UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07, + UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08, + UIC_CMD_RESULT_BUSY = 0x09, + UIC_CMD_RESULT_DME_FAILURE = 0x0A, +}; + +#define MASK_UIC_COMMAND_RESULT 0xFF + +#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8) +#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0) + +/* Interrupt disable masks */ +enum { + /* Interrupt disable mask for UFSHCI v1.0 */ + INTERRUPT_MASK_ALL_VER_10 = 0x30FFF, + INTERRUPT_MASK_RW_VER_10 = 0x30000, + + /* Interrupt disable mask for UFSHCI v1.1 */ + INTERRUPT_MASK_ALL_VER_11 = 0x31FFF, +}; + +/* + * Request Descriptor Definitions + */ + +/* Transfer request command type */ +enum { + UTP_CMD_TYPE_SCSI = 0x0, + UTP_CMD_TYPE_UFS = 0x1, + UTP_CMD_TYPE_DEV_MANAGE = 0x2, +}; + +enum { + UTP_SCSI_COMMAND = 0x00000000, + UTP_NATIVE_UFS_COMMAND = 0x10000000, + UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000, + UTP_REQ_DESC_INT_CMD = 0x01000000, +}; + +/* UTP Transfer Request Data Direction (DD) */ +enum { + UTP_NO_DATA_TRANSFER = 0x00000000, + UTP_HOST_TO_DEVICE = 0x02000000, + UTP_DEVICE_TO_HOST = 0x04000000, +}; + +/* Overall command status values */ +enum { + OCS_SUCCESS = 0x0, + OCS_INVALID_CMD_TABLE_ATTR = 0x1, + OCS_INVALID_PRDT_ATTR = 0x2, + OCS_MISMATCH_DATA_BUF_SIZE = 0x3, + OCS_MISMATCH_RESP_UPIU_SIZE = 0x4, + OCS_PEER_COMM_FAILURE = 0x5, + OCS_ABORTED = 0x6, + OCS_FATAL_ERROR = 0x7, + OCS_INVALID_COMMAND_STATUS = 0x0F, + MASK_OCS = 0x0F, +}; + +/** + * struct ufshcd_sg_entry - UFSHCI PRD Entry + * @base_addr: Lower 32bit physical address DW-0 + * @upper_addr: Upper 32bit physical address DW-1 + * @reserved: Reserved for future use DW-2 + * @size: size of physical segment DW-3 + */ +struct ufshcd_sg_entry { + __le32 base_addr; + __le32 upper_addr; + __le32 reserved; + __le32 size; +}; + +/** + * struct utp_transfer_cmd_desc - UFS Command Descriptor structure + * @command_upiu: Command UPIU Frame address + * @response_upiu: Response UPIU Frame address + * @prd_table: Physical Region Descriptor + */ +struct utp_transfer_cmd_desc { + u8 command_upiu[ALIGNED_UPIU_SIZE]; + u8 response_upiu[ALIGNED_UPIU_SIZE]; + struct ufshcd_sg_entry prd_table[SG_ALL]; +}; + +/** + * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD + * @dword0: Descriptor Header DW0 + * @dword1: Descriptor Header DW1 + * @dword2: Descriptor Header DW2 + * @dword3: Descriptor Header DW3 + */ +struct request_desc_header { + __le32 dword_0; + __le32 dword_1; + __le32 dword_2; + __le32 dword_3; +}; + +/** + * struct utp_transfer_req_desc - UTRD structure + * @header: UTRD header DW-0 to DW-3 + * @command_desc_base_addr_lo: UCD base address low DW-4 + * @command_desc_base_addr_hi: UCD base address high DW-5 + * @response_upiu_length: response UPIU length DW-6 + * @response_upiu_offset: response UPIU offset DW-6 + * @prd_table_length: Physical region descriptor length DW-7 + * @prd_table_offset: Physical region descriptor offset DW-7 + */ +struct utp_transfer_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-5*/ + __le32 command_desc_base_addr_lo; + __le32 command_desc_base_addr_hi; + + /* DW 6 */ + __le16 response_upiu_length; + __le16 response_upiu_offset; + + /* DW 7 */ + __le16 prd_table_length; + __le16 prd_table_offset; +}; + +/** + * struct utp_task_req_desc - UTMRD structure + * @header: UTMRD header DW-0 to DW-3 + * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11 + * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19 + */ +struct utp_task_req_desc { + + /* DW 0-3 */ + struct request_desc_header header; + + /* DW 4-11 */ + __le32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS]; + + /* DW 12-19 */ + __le32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS]; +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h new file mode 100644 index 00000000000..0bb8041c047 --- /dev/null +++ b/drivers/scsi/ufs/unipro.h @@ -0,0 +1,151 @@ +/* + * drivers/scsi/ufs/unipro.h + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _UNIPRO_H_ +#define _UNIPRO_H_ + +/* + * PHY Adpater attributes + */ +#define PA_ACTIVETXDATALANES 0x1560 +#define PA_ACTIVERXDATALANES 0x1580 +#define PA_TXTRAILINGCLOCKS 0x1564 +#define PA_PHY_TYPE 0x1500 +#define PA_AVAILTXDATALANES 0x1520 +#define PA_AVAILRXDATALANES 0x1540 +#define PA_MINRXTRAILINGCLOCKS 0x1543 +#define PA_TXPWRSTATUS 0x1567 +#define PA_RXPWRSTATUS 0x1582 +#define PA_TXFORCECLOCK 0x1562 +#define PA_TXPWRMODE 0x1563 +#define PA_LEGACYDPHYESCDL 0x1570 +#define PA_MAXTXSPEEDFAST 0x1521 +#define PA_MAXTXSPEEDSLOW 0x1522 +#define PA_MAXRXSPEEDFAST 0x1541 +#define PA_MAXRXSPEEDSLOW 0x1542 +#define PA_TXLINKSTARTUPHS 0x1544 +#define PA_TXSPEEDFAST 0x1565 +#define PA_TXSPEEDSLOW 0x1566 +#define PA_REMOTEVERINFO 0x15A0 +#define PA_TXGEAR 0x1568 +#define PA_TXTERMINATION 0x1569 +#define PA_HSSERIES 0x156A +#define PA_PWRMODE 0x1571 +#define PA_RXGEAR 0x1583 +#define PA_RXTERMINATION 0x1584 +#define PA_MAXRXPWMGEAR 0x1586 +#define PA_MAXRXHSGEAR 0x1587 +#define PA_RXHSUNTERMCAP 0x15A5 +#define PA_RXLSTERMCAP 0x15A6 +#define PA_PACPREQTIMEOUT 0x1590 +#define PA_PACPREQEOBTIMEOUT 0x1591 +#define PA_HIBERN8TIME 0x15A7 +#define PA_LOCALVERINFO 0x15A9 +#define PA_TACTIVATE 0x15A8 +#define PA_PACPFRAMECOUNT 0x15C0 +#define PA_PACPERRORCOUNT 0x15C1 +#define PA_PHYTESTCONTROL 0x15C2 +#define PA_PWRMODEUSERDATA0 0x15B0 +#define PA_PWRMODEUSERDATA1 0x15B1 +#define PA_PWRMODEUSERDATA2 0x15B2 +#define PA_PWRMODEUSERDATA3 0x15B3 +#define PA_PWRMODEUSERDATA4 0x15B4 +#define PA_PWRMODEUSERDATA5 0x15B5 +#define PA_PWRMODEUSERDATA6 0x15B6 +#define PA_PWRMODEUSERDATA7 0x15B7 +#define PA_PWRMODEUSERDATA8 0x15B8 +#define PA_PWRMODEUSERDATA9 0x15B9 +#define PA_PWRMODEUSERDATA10 0x15BA +#define PA_PWRMODEUSERDATA11 0x15BB +#define PA_CONNECTEDTXDATALANES 0x1561 +#define PA_CONNECTEDRXDATALANES 0x1581 +#define PA_LOGICALLANEMAP 0x15A1 +#define PA_SLEEPNOCONFIGTIME 0x15A2 +#define PA_STALLNOCONFIGTIME 0x15A3 +#define PA_SAVECONFIGTIME 0x15A4 + +/* PA power modes */ +enum { + FAST_MODE = 1, + SLOW_MODE = 2, + FASTAUTO_MODE = 4, + SLOWAUTO_MODE = 5, + UNCHANGED = 7, +}; + +/* PA TX/RX Frequency Series */ +enum { + PA_HS_MODE_A = 1, + PA_HS_MODE_B = 2, +}; + +/* + * Data Link Layer Attributes + */ +#define DL_TC0TXFCTHRESHOLD 0x2040 +#define DL_FC0PROTTIMEOUTVAL 0x2041 +#define DL_TC0REPLAYTIMEOUTVAL 0x2042 +#define DL_AFC0REQTIMEOUTVAL 0x2043 +#define DL_AFC0CREDITTHRESHOLD 0x2044 +#define DL_TC0OUTACKTHRESHOLD 0x2045 +#define DL_TC1TXFCTHRESHOLD 0x2060 +#define DL_FC1PROTTIMEOUTVAL 0x2061 +#define DL_TC1REPLAYTIMEOUTVAL 0x2062 +#define DL_AFC1REQTIMEOUTVAL 0x2063 +#define DL_AFC1CREDITTHRESHOLD 0x2064 +#define DL_TC1OUTACKTHRESHOLD 0x2065 +#define DL_TXPREEMPTIONCAP 0x2000 +#define DL_TC0TXMAXSDUSIZE 0x2001 +#define DL_TC0RXINITCREDITVAL 0x2002 +#define DL_TC0TXBUFFERSIZE 0x2005 +#define DL_PEERTC0PRESENT 0x2046 +#define DL_PEERTC0RXINITCREVAL 0x2047 +#define DL_TC1TXMAXSDUSIZE 0x2003 +#define DL_TC1RXINITCREDITVAL 0x2004 +#define DL_TC1TXBUFFERSIZE 0x2006 +#define DL_PEERTC1PRESENT 0x2066 +#define DL_PEERTC1RXINITCREVAL 0x2067 + +/* + * Network Layer Attributes + */ +#define N_DEVICEID 0x3000 +#define N_DEVICEID_VALID 0x3001 +#define N_TC0TXMAXSDUSIZE 0x3020 +#define N_TC1TXMAXSDUSIZE 0x3021 + +/* + * Transport Layer Attributes + */ +#define T_NUMCPORTS 0x4000 +#define T_NUMTESTFEATURES 0x4001 +#define T_CONNECTIONSTATE 0x4020 +#define T_PEERDEVICEID 0x4021 +#define T_PEERCPORTID 0x4022 +#define T_TRAFFICCLASS 0x4023 +#define T_PROTOCOLID 0x4024 +#define T_CPORTFLAGS 0x4025 +#define T_TXTOKENVALUE 0x4026 +#define T_RXTOKENVALUE 0x4027 +#define T_LOCALBUFFERSPACE 0x4028 +#define T_PEERBUFFERSPACE 0x4029 +#define T_CREDITSTOSEND 0x402A +#define T_CPORTMODE 0x402B +#define T_TC0TXMAXSDUSIZE 0x4060 +#define T_TC1TXMAXSDUSIZE 0x4061 + +/* Boolean attribute values */ +enum { + FALSE = 0, + TRUE, +}; + +#endif /* _UNIPRO_H_ */ |