diff options
Diffstat (limited to 'drivers/scsi/sun3_NCR5380.c')
| -rw-r--r-- | drivers/scsi/sun3_NCR5380.c | 632 |
1 files changed, 276 insertions, 356 deletions
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 7e19589e71a..88220794cc9 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -49,13 +49,6 @@ * inside the execution of NCR5380_intr(), leading to recursive * calls. * - * - I've added a function merge_contiguous_buffers() that tries to - * merge scatter-gather buffers that are located at contiguous - * physical addresses and can be processed with the same DMA setup. - * Since most scatter-gather operations work on a page (4K) of - * 4 buffers (1K), in more than 90% of all cases three interrupts and - * DMA setup actions are saved. - * * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA * and USLEEP, because these were messing up readability and will never be * needed for Atari SCSI. @@ -70,6 +63,7 @@ * */ #include <scsi/scsi_dbg.h> +#include <scsi/scsi_transport_spi.h> /* * Further development / testing that should be done : @@ -257,7 +251,7 @@ */ static struct Scsi_Host *first_instance = NULL; -static Scsi_Host_Template *the_template = NULL; +static struct scsi_host_template *the_template = NULL; /* Macros ease life... :-) */ #define SETUP_HOSTDATA(in) \ @@ -265,14 +259,14 @@ static Scsi_Host_Template *the_template = NULL; (struct NCR5380_hostdata *)(in)->hostdata #define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata) -#define NEXT(cmd) ((Scsi_Cmnd *)((cmd)->host_scribble)) -#define NEXTADDR(cmd) ((Scsi_Cmnd **)&((cmd)->host_scribble)) +#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble) +#define SET_NEXT(cmd, next) ((cmd)->host_scribble = (void *)(next)) +#define NEXTADDR(cmd) ((struct scsi_cmnd **)&((cmd)->host_scribble)) #define HOSTNO instance->host_no #define H_NO(cmd) (cmd)->device->host->host_no -#define SGADDR(buffer) (void *)(((unsigned long)page_address((buffer)->page)) + \ - (buffer)->offset) +#define SGADDR(buffer) (void *)(((unsigned long)sg_virt(((buffer))))) #ifdef SUPPORT_TAGS @@ -359,7 +353,7 @@ static void __init init_tags( void ) * conditions. */ -static int is_lun_busy( Scsi_Cmnd *cmd, int should_be_tagged ) +static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged) { SETUP_HOSTDATA(cmd->device->host); @@ -370,7 +364,7 @@ static int is_lun_busy( Scsi_Cmnd *cmd, int should_be_tagged ) return( 0 ); if (TagAlloc[cmd->device->id][cmd->device->lun].nr_allocated >= TagAlloc[cmd->device->id][cmd->device->lun].queue_size ) { - TAG_PRINTK( "scsi%d: target %d lun %d: no free tags\n", + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n", H_NO(cmd), cmd->device->id, cmd->device->lun ); return( 1 ); } @@ -383,7 +377,7 @@ static int is_lun_busy( Scsi_Cmnd *cmd, int should_be_tagged ) * untagged. */ -static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged ) +static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged) { SETUP_HOSTDATA(cmd->device->host); @@ -394,7 +388,7 @@ static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged ) !setup_use_tagged_queuing || !cmd->device->tagged_supported) { cmd->tag = TAG_NONE; hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); - TAG_PRINTK( "scsi%d: target %d lun %d now allocated by untagged " + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged " "command\n", H_NO(cmd), cmd->device->id, cmd->device->lun ); } else { @@ -403,7 +397,7 @@ static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged ) cmd->tag = find_first_zero_bit( &ta->allocated, MAX_TAGS ); set_bit( cmd->tag, &ta->allocated ); ta->nr_allocated++; - TAG_PRINTK( "scsi%d: using tag %d for target %d lun %d " + dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d " "(now %d tags in use)\n", H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun, ta->nr_allocated ); @@ -415,13 +409,13 @@ static void cmd_get_tag( Scsi_Cmnd *cmd, int should_be_tagged ) * unlock the LUN. */ -static void cmd_free_tag( Scsi_Cmnd *cmd ) +static void cmd_free_tag(struct scsi_cmnd *cmd) { SETUP_HOSTDATA(cmd->device->host); if (cmd->tag == TAG_NONE) { hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun); - TAG_PRINTK( "scsi%d: target %d lun %d untagged cmd finished\n", + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n", H_NO(cmd), cmd->device->id, cmd->device->lun ); } else if (cmd->tag >= MAX_TAGS) { @@ -432,7 +426,7 @@ static void cmd_free_tag( Scsi_Cmnd *cmd ) TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun]; clear_bit( cmd->tag, &ta->allocated ); ta->nr_allocated--; - TAG_PRINTK( "scsi%d: freed tag %d for target %d lun %d\n", + dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n", H_NO(cmd), cmd->tag, cmd->device->id, cmd->device->lun ); } } @@ -459,85 +453,38 @@ static void free_all_tags( void ) /* - * Function: void merge_contiguous_buffers( Scsi_Cmnd *cmd ) - * - * Purpose: Try to merge several scatter-gather requests into one DMA - * transfer. This is possible if the scatter buffers lie on - * physical contiguous addresses. - * - * Parameters: Scsi_Cmnd *cmd - * The command to work on. The first scatter buffer's data are - * assumed to be already transfered into ptr/this_residual. - */ - -static void merge_contiguous_buffers( Scsi_Cmnd *cmd ) -{ - unsigned long endaddr; -#if (NDEBUG & NDEBUG_MERGING) - unsigned long oldlen = cmd->SCp.this_residual; - int cnt = 1; -#endif - - for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1; - cmd->SCp.buffers_residual && - virt_to_phys(SGADDR(&(cmd->SCp.buffer[1]))) == endaddr; ) { - - MER_PRINTK("VTOP(%p) == %08lx -> merging\n", - SGADDR(&(cmd->SCp.buffer[1])), endaddr); -#if (NDEBUG & NDEBUG_MERGING) - ++cnt; -#endif - ++cmd->SCp.buffer; - --cmd->SCp.buffers_residual; - cmd->SCp.this_residual += cmd->SCp.buffer->length; - endaddr += cmd->SCp.buffer->length; - } -#if (NDEBUG & NDEBUG_MERGING) - if (oldlen != cmd->SCp.this_residual) - MER_PRINTK("merged %d buffers from %p, new length %08x\n", - cnt, cmd->SCp.ptr, cmd->SCp.this_residual); -#endif -} - -/* - * Function : void initialize_SCp(Scsi_Cmnd *cmd) + * Function : void initialize_SCp(struct scsi_cmnd *cmd) * * Purpose : initialize the saved data pointers for cmd to point to the * start of the buffer. * - * Inputs : cmd - Scsi_Cmnd structure to have pointers reset. + * Inputs : cmd - struct scsi_cmnd structure to have pointers reset. */ -static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) +static __inline__ void initialize_SCp(struct scsi_cmnd *cmd) { /* * Initialize the Scsi Pointer field so that all of the commands in the * various queues are valid. */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; - - /* ++roman: Try to merge some scatter-buffers if they are at - * contiguous physical addresses. - */ -// merge_contiguous_buffers( cmd ); } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *) cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } } -#include <linux/config.h> #include <linux/delay.h> -#if 1 +#if NDEBUG static struct { unsigned char mask; const char * name;} @@ -625,12 +572,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance) } } -#else /* !NDEBUG */ - -/* dummies... */ -__inline__ void NCR5380_print(struct Scsi_Host *instance) { }; -__inline__ void NCR5380_print_phase(struct Scsi_Host *instance) { }; - #endif /* @@ -646,11 +587,12 @@ __inline__ void NCR5380_print_phase(struct Scsi_Host *instance) { }; * interrupt or bottom half. */ +#include <linux/gfp.h> #include <linux/workqueue.h> #include <linux/interrupt.h> static volatile int main_running = 0; -static DECLARE_WORK(NCR5380_tqueue, (void (*)(void*))NCR5380_main, NULL); +static DECLARE_WORK(NCR5380_tqueue, NCR5380_main); static __inline__ void queue_main(void) { @@ -670,7 +612,7 @@ static inline void NCR5380_all_init (void) { static int done = 0; if (!done) { - INI_PRINTK("scsi : NCR5380_all_init()\n"); + dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n"); done = 1; } } @@ -713,119 +655,94 @@ static void __init NCR5380_print_options (struct Scsi_Host *instance) * Inputs : instance, pointer to this instance. */ -static void NCR5380_print_status (struct Scsi_Host *instance) +static void lprint_Scsi_Cmnd(Scsi_Cmnd *cmd) { - char *pr_bfr; - char *start; - int len; - - NCR_PRINT(NDEBUG_ANY); - NCR_PRINT_PHASE(NDEBUG_ANY); - - pr_bfr = (char *) __get_free_page(GFP_ATOMIC); - if (!pr_bfr) { - printk("NCR5380_print_status: no memory for print buffer\n"); - return; - } - len = NCR5380_proc_info(instance, pr_bfr, &start, 0, PAGE_SIZE, 0); - pr_bfr[len] = 0; - printk("\n%s\n", pr_bfr); - free_page((unsigned long) pr_bfr); + int i, s; + unsigned char *command; + printk("scsi%d: destination target %d, lun %d\n", + H_NO(cmd), cmd->device->id, cmd->device->lun); + printk(KERN_CONT " command = "); + command = cmd->cmnd; + printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]); + for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) + printk(KERN_CONT " %02x", command[i]); + printk("\n"); } - -/******************************************/ -/* - * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED] - * - * *buffer: I/O buffer - * **start: if inout == FALSE pointer into buffer where user read should start - * offset: current offset - * length: length of buffer - * hostno: Scsi_Host host_no - * inout: TRUE - user is writing; FALSE - user is reading - * - * Return the number of bytes read from or written -*/ - -#undef SPRINTF -#define SPRINTF(fmt,args...) \ - do { if (pos + strlen(fmt) + 20 /* slop */ < buffer + length) \ - pos += sprintf(pos, fmt , ## args); } while(0) -static -char *lprint_Scsi_Cmnd (Scsi_Cmnd *cmd, char *pos, char *buffer, int length); - -static int NCR5380_proc_info (struct Scsi_Host *instance, char *buffer, char **start, - off_t offset, int length, int inout) +static void NCR5380_print_status(struct Scsi_Host *instance) { - char *pos = buffer; - struct NCR5380_hostdata *hostdata; - Scsi_Cmnd *ptr; - unsigned long flags; - off_t begin = 0; -#define check_offset() \ - do { \ - if (pos - buffer < offset - begin) { \ - begin += pos - buffer; \ - pos = buffer; \ - } \ - } while (0) - - hostdata = (struct NCR5380_hostdata *)instance->hostdata; - - if (inout) { /* Has data been written to the file ? */ - return(-ENOSYS); /* Currently this is a no-op */ - } - SPRINTF("NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE); - check_offset(); - local_irq_save(flags); - SPRINTF("NCR5380: coroutine is%s running.\n", main_running ? "" : "n't"); - check_offset(); - if (!hostdata->connected) - SPRINTF("scsi%d: no currently connected command\n", HOSTNO); - else - pos = lprint_Scsi_Cmnd ((Scsi_Cmnd *) hostdata->connected, - pos, buffer, length); - SPRINTF("scsi%d: issue_queue\n", HOSTNO); - check_offset(); - for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = NEXT(ptr)) { - pos = lprint_Scsi_Cmnd (ptr, pos, buffer, length); - check_offset(); - } + struct NCR5380_hostdata *hostdata; + Scsi_Cmnd *ptr; + unsigned long flags; + + NCR5380_dprint(NDEBUG_ANY, instance); + NCR5380_dprint_phase(NDEBUG_ANY, instance); + + hostdata = (struct NCR5380_hostdata *)instance->hostdata; + + printk("\nNCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE); + local_irq_save(flags); + printk("NCR5380: coroutine is%s running.\n", + main_running ? "" : "n't"); + if (!hostdata->connected) + printk("scsi%d: no currently connected command\n", HOSTNO); + else + lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected); + printk("scsi%d: issue_queue\n", HOSTNO); + for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr)) + lprint_Scsi_Cmnd(ptr); + + printk("scsi%d: disconnected_queue\n", HOSTNO); + for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; + ptr = NEXT(ptr)) + lprint_Scsi_Cmnd(ptr); - SPRINTF("scsi%d: disconnected_queue\n", HOSTNO); - check_offset(); - for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; - ptr = NEXT(ptr)) { - pos = lprint_Scsi_Cmnd (ptr, pos, buffer, length); - check_offset(); - } - - local_irq_restore(flags); - *start = buffer + (offset - begin); - if (pos - buffer < offset - begin) - return 0; - else if (pos - buffer - (offset - begin) < length) - return pos - buffer - (offset - begin); - return length; + local_irq_restore(flags); + printk("\n"); } -static char * -lprint_Scsi_Cmnd (Scsi_Cmnd *cmd, char *pos, char *buffer, int length) +static void show_Scsi_Cmnd(Scsi_Cmnd *cmd, struct seq_file *m) { - int i, s; - unsigned char *command; - SPRINTF("scsi%d: destination target %d, lun %d\n", - H_NO(cmd), cmd->device->id, cmd->device->lun); - SPRINTF(" command = "); - command = cmd->cmnd; - SPRINTF("%2d (0x%02x)", command[0], command[0]); - for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) - SPRINTF(" %02x", command[i]); - SPRINTF("\n"); - return pos; + int i, s; + unsigned char *command; + seq_printf(m, "scsi%d: destination target %d, lun %d\n", + H_NO(cmd), cmd->device->id, cmd->device->lun); + seq_printf(m, " command = "); + command = cmd->cmnd; + seq_printf(m, "%2d (0x%02x)", command[0], command[0]); + for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) + seq_printf(m, " %02x", command[i]); + seq_printf(m, "\n"); } +static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata; + Scsi_Cmnd *ptr; + unsigned long flags; + + hostdata = (struct NCR5380_hostdata *)instance->hostdata; + + seq_printf(m, "NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE); + local_irq_save(flags); + seq_printf(m, "NCR5380: coroutine is%s running.\n", + main_running ? "" : "n't"); + if (!hostdata->connected) + seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO); + else + show_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected, m); + seq_printf(m, "scsi%d: issue_queue\n", HOSTNO); + for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr)) + show_Scsi_Cmnd(ptr, m); + + seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO); + for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; + ptr = NEXT(ptr)) + show_Scsi_Cmnd(ptr, m); + + local_irq_restore(flags); + return 0; +} /* * Function : void NCR5380_init (struct Scsi_Host *instance) @@ -839,7 +756,7 @@ lprint_Scsi_Cmnd (Scsi_Cmnd *cmd, char *pos, char *buffer, int length) * */ -static int NCR5380_init (struct Scsi_Host *instance, int flags) +static int __init NCR5380_init(struct Scsi_Host *instance, int flags) { int i; SETUP_HOSTDATA(instance); @@ -887,9 +804,14 @@ static int NCR5380_init (struct Scsi_Host *instance, int flags) return 0; } +static void NCR5380_exit(struct Scsi_Host *instance) +{ + /* Empty, as we didn't schedule any delayed work */ +} + /* - * Function : int NCR5380_queue_command (Scsi_Cmnd *cmd, - * void (*done)(Scsi_Cmnd *)) + * Function : int NCR5380_queue_command (struct scsi_cmnd *cmd, + * void (*done)(struct scsi_cmnd *)) * * Purpose : enqueues a SCSI command * @@ -906,10 +828,11 @@ static int NCR5380_init (struct Scsi_Host *instance, int flags) */ /* Only make static if a wrapper function is used */ -static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) +static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) { SETUP_HOSTDATA(cmd->device->host); - Scsi_Cmnd *tmp; + struct scsi_cmnd *tmp; unsigned long flags; #if (NDEBUG & NDEBUG_NO_WRITE) @@ -933,7 +856,7 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) } # endif # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { @@ -941,14 +864,14 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingw++; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingr++; break; } @@ -959,7 +882,7 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) * in a queue */ - NEXT(cmd) = NULL; + SET_NEXT(cmd, NULL); cmd->scsi_done = done; cmd->result = 0; @@ -987,19 +910,19 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) */ if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) { LIST(cmd, hostdata->issue_queue); - NEXT(cmd) = hostdata->issue_queue; + SET_NEXT(cmd, hostdata->issue_queue); hostdata->issue_queue = cmd; } else { - for (tmp = (Scsi_Cmnd *)hostdata->issue_queue; + for (tmp = (struct scsi_cmnd *)hostdata->issue_queue; NEXT(tmp); tmp = NEXT(tmp)) ; LIST(cmd, tmp); - NEXT(tmp) = cmd; + SET_NEXT(tmp, cmd); } local_irq_restore(flags); - QU_PRINTK("scsi%d: command added to %s of queue\n", H_NO(cmd), + dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd), (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail"); /* If queue_command() is called from an interrupt (real one or bottom @@ -1016,6 +939,8 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) return 0; } +static DEF_SCSI_QCMD(NCR5380_queue_command) + /* * Function : NCR5380_main (void) * @@ -1028,9 +953,9 @@ static int NCR5380_queue_command (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) * reenable them. This prevents reentrancy and kernel stack overflow. */ -static void NCR5380_main (void *bl) +static void NCR5380_main (struct work_struct *bl) { - Scsi_Cmnd *tmp, *prev; + struct scsi_cmnd *tmp, *prev; struct Scsi_Host *instance = first_instance; struct NCR5380_hostdata *hostdata = HOSTDATA(instance); int done; @@ -1067,26 +992,22 @@ static void NCR5380_main (void *bl) done = 1; if (!hostdata->connected) { - MAIN_PRINTK( "scsi%d: not connected\n", HOSTNO ); + dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO ); /* * Search through the issue_queue for a command destined * for a target that's not busy. */ #if (NDEBUG & NDEBUG_LISTS) - for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL; + for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp)) ; if ((tmp == prev) && tmp) printk(" LOOP\n");/* else printk("\n");*/ #endif - for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, + for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp) ) { -#if (NDEBUG & NDEBUG_LISTS) if (prev != tmp) - printk("MAIN tmp=%p target=%d busy=%d lun=%d\n", - tmp, tmp->target, hostdata->busy[tmp->target], - tmp->lun); -#endif + dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%d\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun); /* When we find one, remove it from the issue queue. */ /* ++guenther: possible race with Falcon locking */ if ( @@ -1100,12 +1021,12 @@ static void NCR5380_main (void *bl) local_irq_disable(); if (prev) { REMOVE(prev, NEXT(prev), tmp, NEXT(tmp)); - NEXT(prev) = NEXT(tmp); + SET_NEXT(prev, NEXT(tmp)); } else { REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp)); hostdata->issue_queue = NEXT(tmp); } - NEXT(tmp) = NULL; + SET_NEXT(tmp, NULL); /* reenable interrupts after finding one */ local_irq_restore(flags); @@ -1116,9 +1037,9 @@ static void NCR5380_main (void *bl) * On failure, we must add the command back to the * issue queue so we can keep trying. */ - MAIN_PRINTK("scsi%d: main(): command for target %d " + dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d " "lun %d removed from issue_queue\n", - HOSTNO, tmp->target, tmp->lun); + HOSTNO, tmp->device->id, tmp->device->lun); /* * REQUEST SENSE commands are issued without tagged * queueing, even on SCSI-II devices because the @@ -1139,13 +1060,13 @@ static void NCR5380_main (void *bl) } else { local_irq_disable(); LIST(tmp, hostdata->issue_queue); - NEXT(tmp) = hostdata->issue_queue; + SET_NEXT(tmp, hostdata->issue_queue); hostdata->issue_queue = tmp; #ifdef SUPPORT_TAGS cmd_free_tag( tmp ); #endif local_irq_restore(flags); - MAIN_PRINTK("scsi%d: main(): select() failed, " + dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, " "returned to issue_queue\n", HOSTNO); if (hostdata->connected) break; @@ -1159,10 +1080,10 @@ static void NCR5380_main (void *bl) #endif ) { local_irq_restore(flags); - MAIN_PRINTK("scsi%d: main: performing information transfer\n", + dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n", HOSTNO); NCR5380_information_transfer(instance); - MAIN_PRINTK("scsi%d: main: done set false\n", HOSTNO); + dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO); done = 0; } } while (!done); @@ -1199,7 +1120,7 @@ static void NCR5380_dma_complete( struct Scsi_Host *instance ) return; } - DMA_PRINTK("scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n", + dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n", HOSTNO, NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG)); @@ -1252,33 +1173,33 @@ static void NCR5380_dma_complete( struct Scsi_Host *instance ) * */ -static irqreturn_t NCR5380_intr (int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t NCR5380_intr (int irq, void *dev_id) { struct Scsi_Host *instance = first_instance; int done = 1, handled = 0; unsigned char basr; - INT_PRINTK("scsi%d: NCR5380 irq triggered\n", HOSTNO); + dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO); /* Look for pending interrupts */ basr = NCR5380_read(BUS_AND_STATUS_REG); - INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr); + dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr); /* dispatch to appropriate routine if found and done=0 */ if (basr & BASR_IRQ) { - NCR_PRINT(NDEBUG_INTR); + NCR5380_dprint(NDEBUG_INTR, instance); if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) { done = 0; - ENABLE_IRQ(); - INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO); +// ENABLE_IRQ(); + dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO); NCR5380_reselect(instance); (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); } else if (basr & BASR_PARITY_ERROR) { - INT_PRINTK("scsi%d: PARITY interrupt\n", HOSTNO); + dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO); (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG); } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) { - INT_PRINTK("scsi%d: RESET interrupt\n", HOSTNO); + dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO); (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG); } else { @@ -1298,16 +1219,16 @@ static irqreturn_t NCR5380_intr (int irq, void *dev_id, struct pt_regs *regs) ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) { - INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO); + dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO); NCR5380_dma_complete( instance ); done = 0; - ENABLE_IRQ(); +// ENABLE_IRQ(); } else #endif /* REAL_DMA */ { /* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */ if (basr & BASR_PHASE_MATCH) - INT_PRINTK("scsi%d: unknown interrupt, " + dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, " "BASR 0x%x, MR 0x%x, SR 0x%x\n", HOSTNO, basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG)); @@ -1331,7 +1252,7 @@ static irqreturn_t NCR5380_intr (int irq, void *dev_id, struct pt_regs *regs) } if (!done) { - INT_PRINTK("scsi%d: in int routine, calling main\n", HOSTNO); + dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO); /* Put a call to NCR5380_main() on the queue... */ queue_main(); } @@ -1339,10 +1260,11 @@ static irqreturn_t NCR5380_intr (int irq, void *dev_id, struct pt_regs *regs) } #ifdef NCR5380_STATS -static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd* cmd) +static void collect_stats(struct NCR5380_hostdata *hostdata, + struct scsi_cmnd *cmd) { # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { @@ -1350,14 +1272,14 @@ static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd* cmd) case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingw--; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingr--; break; } @@ -1365,8 +1287,8 @@ static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd* cmd) #endif /* - * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, - * int tag); + * Function : int NCR5380_select(struct Scsi_Host *instance, + * struct scsi_cmnd *cmd, int tag); * * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command, * including ARBITRATION, SELECTION, and initial message out for @@ -1395,7 +1317,8 @@ static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd* cmd) * cmd->result host byte set to DID_BAD_TARGET. */ -static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) +static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd, + int tag) { SETUP_HOSTDATA(instance); unsigned char tmp[3], phase; @@ -1405,8 +1328,8 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) unsigned long flags; hostdata->restart_select = 0; - NCR_PRINT(NDEBUG_ARBITRATION); - ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO, + NCR5380_dprint(NDEBUG_ARBITRATION, instance); + dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO, instance->this_id); /* @@ -1432,7 +1355,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) local_irq_restore(flags); /* Wait for arbitration logic to complete */ -#if NCR_TIMEOUT +#ifdef NCR_TIMEOUT { unsigned long timeout = jiffies + 2*NCR_TIMEOUT; @@ -1452,7 +1375,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) && !hostdata->connected); #endif - ARB_PRINTK("scsi%d: arbitration complete\n", HOSTNO); + dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO); if (hostdata->connected) { NCR5380_write(MODE_REG, MR_BASE); @@ -1473,7 +1396,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || hostdata->connected) { NCR5380_write(MODE_REG, MR_BASE); - ARB_PRINTK("scsi%d: lost arbitration, deasserting MR_ARBITRATE\n", + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n", HOSTNO); return -1; } @@ -1488,7 +1411,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) hostdata->connected) { NCR5380_write(MODE_REG, MR_BASE); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - ARB_PRINTK("scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n", + dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n", HOSTNO); return -1; } @@ -1511,7 +1434,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) return -1; } - ARB_PRINTK("scsi%d: won arbitration\n", HOSTNO); + dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO); /* * Now that we have won arbitration, start Selection process, asserting @@ -1571,7 +1494,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) udelay(1); - SEL_PRINTK("scsi%d: selecting target %d\n", HOSTNO, cmd->device->id); + dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id); /* * The SCSI specification calls for a 250 ms timeout for the actual @@ -1591,7 +1514,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) * IO while SEL is true. But again, there are some disks out the in the * world that do that nevertheless. (Somebody claimed that this announces * reselection capability of the target.) So we better skip that test and - * only wait for BSY... (Famous german words: Der Klügere gibt nach :-) + * only wait for BSY... (Famous german words: Der Klügere gibt nach :-) */ while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & @@ -1626,7 +1549,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO); if (hostdata->restart_select) printk(KERN_NOTICE "\trestart select\n"); - NCR_PRINT(NDEBUG_ANY); + NCR5380_dprint(NDEBUG_ANY, instance); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return -1; } @@ -1639,7 +1562,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) #endif cmd->scsi_done(cmd); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); - SEL_PRINTK("scsi%d: target did not respond within 250ms\n", HOSTNO); + dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO); NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask); return 0; } @@ -1664,7 +1587,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) /* Wait for start of REQ/ACK handshake */ while (!(NCR5380_read(STATUS_REG) & SR_REQ)); - SEL_PRINTK("scsi%d: target %d selected, going into MESSAGE OUT phase.\n", + dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n", HOSTNO, cmd->device->id); tmp[0] = IDENTIFY(1, cmd->device->lun); @@ -1684,7 +1607,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) data = tmp; phase = PHASE_MSGOUT; NCR5380_transfer_pio(instance, &phase, &len, &data); - SEL_PRINTK("scsi%d: nexus established.\n", HOSTNO); + dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO); /* XXX need to handle errors here */ hostdata->connected = cmd; #ifndef SUPPORT_TAGS @@ -1710,7 +1633,7 @@ static int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag) * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes are transfered or exit + * maximum number of bytes, 0 if all bytes are transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1747,12 +1670,12 @@ static int NCR5380_transfer_pio( struct Scsi_Host *instance, */ while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)); - HSH_PRINTK("scsi%d: REQ detected\n", HOSTNO); + dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO); /* Check for phase mismatch */ if ((tmp & PHASE_MASK) != p) { - PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO); - NCR_PRINT_PHASE(NDEBUG_PIO); + dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO); + NCR5380_dprint_phase(NDEBUG_PIO, instance); break; } @@ -1775,24 +1698,24 @@ static int NCR5380_transfer_pio( struct Scsi_Host *instance, if (!((p & SR_MSG) && c > 1)) { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA); - NCR_PRINT(NDEBUG_PIO); + NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ACK); } else { NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN); - NCR_PRINT(NDEBUG_PIO); + NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK); } } else { - NCR_PRINT(NDEBUG_PIO); + NCR5380_dprint(NDEBUG_PIO, instance); NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK); } while (NCR5380_read(STATUS_REG) & SR_REQ); - HSH_PRINTK("scsi%d: req false, handshake complete\n", HOSTNO); + dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO); /* * We have several special cases to consider during REQ/ACK handshaking : @@ -1813,7 +1736,7 @@ static int NCR5380_transfer_pio( struct Scsi_Host *instance, } } while (--c); - PIO_PRINTK("scsi%d: residual %d\n", HOSTNO, c); + dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c); *count = c; *data = d; @@ -1859,7 +1782,7 @@ static int do_abort (struct Scsi_Host *host) * the target sees, so we just handshake. */ - while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ); + while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)); NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); @@ -1897,7 +1820,7 @@ static int do_abort (struct Scsi_Host *host) * bytes to transfer, **data - pointer to data pointer. * * Returns : -1 when different phase is entered without transferring - * maximum number of bytes, 0 if all bytes or transfered or exit + * maximum number of bytes, 0 if all bytes or transferred or exit * is in same phase. * * Also, *phase, *count, *data are modified in place. @@ -1921,7 +1844,7 @@ static int NCR5380_transfer_dma( struct Scsi_Host *instance, } hostdata->dma_len = c; - DMA_PRINTK("scsi%d: initializing DMA for %s, %d bytes %s %p\n", + dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n", HOSTNO, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", *data); @@ -1985,7 +1908,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) #endif unsigned char *data; unsigned char phase, tmp, extended_msg[10], old_phase=0xff; - Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected; + struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected; #ifdef SUN3_SCSI_VME dregs->csr |= CSR_INTR; @@ -1998,7 +1921,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) phase = (tmp & PHASE_MASK); if (phase != old_phase) { old_phase = phase; - NCR_PRINT_PHASE(NDEBUG_INFORMATION); + NCR5380_dprint_phase(NDEBUG_INFORMATION, instance); } if(phase == PHASE_CMDOUT) { @@ -2017,7 +1940,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done != cmd)) { - if(cmd->request->flags & REQ_CMD) { + if (cmd->request->cmd_type == REQ_TYPE_FS) { sun3scsi_dma_setup(d, count, rq_data_dir(cmd->request)); sun3_dma_setup_done = cmd; @@ -2050,7 +1973,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->done(cmd); + cmd->scsi_done(cmd); return; #endif case PHASE_DATAIN: @@ -2063,12 +1986,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) --cmd->SCp.buffers_residual; cmd->SCp.this_residual = cmd->SCp.buffer->length; cmd->SCp.ptr = SGADDR(cmd->SCp.buffer); - - /* ++roman: Try to merge some scatter-buffers if - * they are at contiguous physical addresses. - */ -// merge_contiguous_buffers( cmd ); - INF_PRINTK("scsi%d: %d bytes and %d buffers left\n", + dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n", HOSTNO, cmd->SCp.this_residual, cmd->SCp.buffers_residual); } @@ -2110,7 +2028,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) sink = 1; do_abort(instance); cmd->result = DID_ERROR << 16; - cmd->done(cmd); + cmd->scsi_done(cmd); /* XXX - need to source or sink data here, as appropriate */ } else { #ifdef REAL_DMA @@ -2160,7 +2078,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - LNK_PRINTK("scsi%d: target %d lun %d linked command " + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked command " "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun); /* Enable reselect interrupts */ @@ -2185,7 +2103,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * and don't free it! */ cmd->next_link->tag = cmd->tag; cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); - LNK_PRINTK("scsi%d: target %d lun %d linked request " + dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %d linked request " "done, calling scsi_done().\n", HOSTNO, cmd->device->id, cmd->device->lun); #ifdef NCR5380_STATS @@ -2200,7 +2118,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) /* Accept message by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); hostdata->connected = NULL; - QU_PRINTK("scsi%d: command for target %d, lun %d " + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %d " "completed\n", HOSTNO, cmd->device->id, cmd->device->lun); #ifdef SUPPORT_TAGS cmd_free_tag( cmd ); @@ -2214,7 +2132,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) /* ++Andreas: the mid level code knows about QUEUE_FULL now. */ TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun]; - TAG_PRINTK("scsi%d: target %d lun %d returned " + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d returned " "QUEUE_FULL after %d commands\n", HOSTNO, cmd->device->id, cmd->device->lun, ta->nr_allocated); @@ -2249,32 +2167,28 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16); #ifdef AUTOSENSE + if ((cmd->cmnd[0] == REQUEST_SENSE) && + hostdata->ses.cmd_len) { + scsi_eh_restore_cmnd(cmd, &hostdata->ses); + hostdata->ses.cmd_len = 0 ; + } + if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) { - ASEN_PRINTK("scsi%d: performing request sense\n", + scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0); + dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO); - cmd->cmnd[0] = REQUEST_SENSE; - cmd->cmnd[1] &= 0xe0; - cmd->cmnd[2] = 0; - cmd->cmnd[3] = 0; - cmd->cmnd[4] = sizeof(cmd->sense_buffer); - cmd->cmnd[5] = 0; - cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); - - cmd->use_sg = 0; /* this is initialized from initialize_SCp cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; */ - cmd->request_buffer = (char *) cmd->sense_buffer; - cmd->request_bufflen = sizeof(cmd->sense_buffer); local_irq_save(flags); LIST(cmd,hostdata->issue_queue); - NEXT(cmd) = hostdata->issue_queue; - hostdata->issue_queue = (Scsi_Cmnd *) cmd; + SET_NEXT(cmd, hostdata->issue_queue); + hostdata->issue_queue = (struct scsi_cmnd *) cmd; local_irq_restore(flags); - QU_PRINTK("scsi%d: REQUEST SENSE added to head of " + dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of " "issue queue\n", H_NO(cmd)); } else #endif /* def AUTOSENSE */ @@ -2314,7 +2228,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) cmd->device->tagged_supported = 0; hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); cmd->tag = TAG_NONE; - TAG_PRINTK("scsi%d: target %d lun %d rejected " + dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d rejected " "QUEUE_TAG message; tagged queuing " "disabled\n", HOSTNO, cmd->device->id, cmd->device->lun); @@ -2327,11 +2241,11 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) local_irq_save(flags); cmd->device->disconnect = 1; LIST(cmd,hostdata->disconnected_queue); - NEXT(cmd) = hostdata->disconnected_queue; + SET_NEXT(cmd, hostdata->disconnected_queue); hostdata->connected = NULL; hostdata->disconnected_queue = cmd; local_irq_restore(flags); - QU_PRINTK("scsi%d: command for target %d lun %d was " + dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %d was " "moved from connected to the " "disconnected_queue\n", HOSTNO, cmd->device->id, cmd->device->lun); @@ -2378,19 +2292,19 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since scsi_print_msg() wants the whole thing. + * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - EXT_PRINTK("scsi%d: receiving extended message\n", HOSTNO); + dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO); len = 2; data = extended_msg + 1; phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); - EXT_PRINTK("scsi%d: length=%d, code=0x%02x\n", HOSTNO, + dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO, (int)extended_msg[1], (int)extended_msg[2]); if (!len && extended_msg[1] <= @@ -2402,7 +2316,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) phase = PHASE_MSGIN; NCR5380_transfer_pio(instance, &phase, &len, &data); - EXT_PRINTK("scsi%d: message received, residual %d\n", + dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n", HOSTNO, len); switch (extended_msg[2]) { @@ -2431,7 +2345,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) default: if (!tmp) { printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO); - scsi_print_msg (extended_msg); + spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk(KERN_DEBUG "scsi%d: rejecting unknown " @@ -2492,7 +2406,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) break; default: printk("scsi%d: unknown phase\n", HOSTNO); - NCR_PRINT(NDEBUG_ANY); + NCR5380_dprint(NDEBUG_ANY, instance); } /* switch(phase) */ } /* if (tmp * SR_REQ) */ } /* while (1) */ @@ -2502,7 +2416,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * Function : void NCR5380_reselect (struct Scsi_Host *instance) * * Purpose : does reselection, initializing the instance->connected - * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q + * field to point to the struct scsi_cmnd for which the I_T_L or I_T_L_Q * nexus has been reestablished, * * Inputs : instance - this instance of the NCR5380. @@ -2521,7 +2435,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) unsigned char tag; #endif unsigned char msg[3]; - Scsi_Cmnd *tmp = NULL, *prev; + struct scsi_cmnd *tmp = NULL, *prev; /* unsigned long flags; */ /* @@ -2534,7 +2448,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask); - RSL_PRINTK("scsi%d: reselect\n", HOSTNO); + dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO); /* * At this point, we have detected that our SCSI ID is on the bus, @@ -2566,7 +2480,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!(msg[0] & 0x80)) { printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); - scsi_print_msg(msg); + spi_print_msg(msg); do_abort(instance); return; } @@ -2577,7 +2491,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) * just reestablished, and remove it from the disconnected queue. */ - for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL; + for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp) ) { if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun) #ifdef SUPPORT_TAGS @@ -2586,12 +2500,12 @@ static void NCR5380_reselect (struct Scsi_Host *instance) ) { if (prev) { REMOVE(prev, NEXT(prev), tmp, NEXT(tmp)); - NEXT(prev) = NEXT(tmp); + SET_NEXT(prev, NEXT(tmp)); } else { REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp)); hostdata->disconnected_queue = NEXT(tmp); } - NEXT(tmp) = NULL; + SET_NEXT(tmp, NULL); break; } } @@ -2656,23 +2570,23 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!NCR5380_transfer_pio(instance, &phase, &len, &data) && msg[1] == SIMPLE_QUEUE_TAG) tag = msg[2]; - TAG_PRINTK("scsi%d: target mask %02x, lun %d sent tag %d at " + dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at " "reselection\n", HOSTNO, target_mask, lun, tag); } #endif hostdata->connected = tmp; - RSL_PRINTK("scsi%d: nexus established, target = %d, lun = %d, tag = %d\n", - HOSTNO, tmp->target, tmp->lun, tmp->tag); + dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %d, tag = %d\n", + HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag); } /* - * Function : int NCR5380_abort (Scsi_Cmnd *cmd) + * Function : int NCR5380_abort(struct scsi_cmnd *cmd) * * Purpose : abort a command * - * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the + * Inputs : cmd - the struct scsi_cmnd to abort, code - code to set the * host byte of the result field to, if zero DID_ABORTED is * used. * @@ -2684,11 +2598,11 @@ static void NCR5380_reselect (struct Scsi_Host *instance) * called where the loop started in NCR5380_main(). */ -static int NCR5380_abort (Scsi_Cmnd *cmd) +static int NCR5380_abort(struct scsi_cmnd *cmd) { struct Scsi_Host *instance = cmd->device->host; SETUP_HOSTDATA(instance); - Scsi_Cmnd *tmp, **prev; + struct scsi_cmnd *tmp, **prev; unsigned long flags; printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO); @@ -2698,7 +2612,7 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) local_irq_save(flags); - ABRT_PRINTK("scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO, + dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO, NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG)); @@ -2711,7 +2625,7 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) if (hostdata->connected == cmd) { - ABRT_PRINTK("scsi%d: aborting connected command\n", HOSTNO); + dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO); /* * We should perform BSY checking, and make sure we haven't slipped * into BUS FREE. @@ -2740,11 +2654,11 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) #endif local_irq_restore(flags); cmd->scsi_done(cmd); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } else { /* local_irq_restore(flags); */ printk("scsi%d: abort of connected command failed!\n", HOSTNO); - return SCSI_ABORT_ERROR; + return FAILED; } } #endif @@ -2753,21 +2667,21 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) * Case 2 : If the command hasn't been issued yet, we simply remove it * from the issue queue. */ - for (prev = (Scsi_Cmnd **) &(hostdata->issue_queue), - tmp = (Scsi_Cmnd *) hostdata->issue_queue; - tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp) ) + for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), + tmp = (struct scsi_cmnd *) hostdata->issue_queue; + tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) if (cmd == tmp) { REMOVE(5, *prev, tmp, NEXT(tmp)); (*prev) = NEXT(tmp); - NEXT(tmp) = NULL; + SET_NEXT(tmp, NULL); tmp->result = DID_ABORT << 16; local_irq_restore(flags); - ABRT_PRINTK("scsi%d: abort removed command from issue queue.\n", + dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n", HOSTNO); /* Tagged queuing note: no tag to free here, hasn't been assigned * yet... */ tmp->scsi_done(tmp); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } /* @@ -2783,8 +2697,8 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) if (hostdata->connected) { local_irq_restore(flags); - ABRT_PRINTK("scsi%d: abort failed, command connected.\n", HOSTNO); - return SCSI_ABORT_SNOOZE; + dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO); + return FAILED; } /* @@ -2812,27 +2726,27 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) * it from the disconnected queue. */ - for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp; + for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = NEXT(tmp)) if (cmd == tmp) { local_irq_restore(flags); - ABRT_PRINTK("scsi%d: aborting disconnected command.\n", HOSTNO); + dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO); if (NCR5380_select (instance, cmd, (int) cmd->tag)) - return SCSI_ABORT_BUSY; + return FAILED; - ABRT_PRINTK("scsi%d: nexus reestablished.\n", HOSTNO); + dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO); do_abort (instance); local_irq_save(flags); - for (prev = (Scsi_Cmnd **) &(hostdata->disconnected_queue), - tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; + for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), + tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp) ) if (cmd == tmp) { REMOVE(5, *prev, tmp, NEXT(tmp)); *prev = NEXT(tmp); - NEXT(tmp) = NULL; + SET_NEXT(tmp, NULL); tmp->result = DID_ABORT << 16; /* We must unlock the tag/LUN immediately here, since the * target goes to BUS FREE and doesn't send us another @@ -2845,7 +2759,7 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) #endif local_irq_restore(flags); tmp->scsi_done(tmp); - return SCSI_ABORT_SUCCESS; + return SUCCESS; } } @@ -2860,29 +2774,28 @@ static int NCR5380_abort (Scsi_Cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); - return SCSI_ABORT_NOT_RUNNING; + return FAILED; } /* - * Function : int NCR5380_bus_reset (Scsi_Cmnd *cmd) + * Function : int NCR5380_bus_reset(struct scsi_cmnd *cmd) * * Purpose : reset the SCSI bus. * - * Returns : SCSI_RESET_WAKEUP + * Returns : SUCCESS or FAILURE * */ -static int NCR5380_bus_reset( Scsi_Cmnd *cmd) +static int NCR5380_bus_reset(struct scsi_cmnd *cmd) { SETUP_HOSTDATA(cmd->device->host); int i; unsigned long flags; -#if 1 - Scsi_Cmnd *connected, *disconnected_queue; +#if defined(RESET_RUN_DONE) + struct scsi_cmnd *connected, *disconnected_queue; #endif @@ -2903,8 +2816,15 @@ static int NCR5380_bus_reset( Scsi_Cmnd *cmd) * through anymore ... */ (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG ); -#if 1 /* XXX Should now be done by midlevel code, but it's broken XXX */ - /* XXX see below XXX */ + /* MSch 20140115 - looking at the generic NCR5380 driver, all of this + * should go. + * Catch-22: if we don't clear all queues, the SCSI driver lock will + * not be released by atari_scsi_reset()! + */ + +#if defined(RESET_RUN_DONE) + /* XXX Should now be done by midlevel code, but it's broken XXX */ + /* XXX see below XXX */ /* MSch: old-style reset: actually abort all command processing here */ @@ -2914,9 +2834,9 @@ static int NCR5380_bus_reset( Scsi_Cmnd *cmd) * remembered in local variables first. */ local_irq_save(flags); - connected = (Scsi_Cmnd *)hostdata->connected; + connected = (struct scsi_cmnd *)hostdata->connected; hostdata->connected = NULL; - disconnected_queue = (Scsi_Cmnd *)hostdata->disconnected_queue; + disconnected_queue = (struct scsi_cmnd *)hostdata->disconnected_queue; hostdata->disconnected_queue = NULL; #ifdef SUPPORT_TAGS free_all_tags(); @@ -2934,26 +2854,26 @@ static int NCR5380_bus_reset( Scsi_Cmnd *cmd) */ if ((cmd = connected)) { - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd)); + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd)); cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16); cmd->scsi_done( cmd ); } for (i = 0; (cmd = disconnected_queue); ++i) { disconnected_queue = NEXT(cmd); - NEXT(cmd) = NULL; + SET_NEXT(cmd, NULL); cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16); cmd->scsi_done( cmd ); } if (i > 0) - ABRT_PRINTK("scsi: reset aborted %d disconnected command(s)\n", i); + dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i); /* since all commands have been explicitly terminated, we need to tell * the midlevel code that the reset was SUCCESSFUL, and there is no * need to 'wake up' the commands by a request_sense */ - return SCSI_RESET_SUCCESS | SCSI_RESET_BUS_RESET; + return SUCCESS; #else /* 1 */ /* MSch: new-style reset handling: let the mid-level do what it can */ @@ -2980,11 +2900,11 @@ static int NCR5380_bus_reset( Scsi_Cmnd *cmd) */ if (hostdata->issue_queue) - ABRT_PRINTK("scsi%d: reset aborted issued command(s)\n", H_NO(cmd)); + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd)); if (hostdata->connected) - ABRT_PRINTK("scsi%d: reset aborted a connected command\n", H_NO(cmd)); + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd)); if (hostdata->disconnected_queue) - ABRT_PRINTK("scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd)); + dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd)); local_irq_save(flags); hostdata->issue_queue = NULL; @@ -3001,7 +2921,7 @@ static int NCR5380_bus_reset( Scsi_Cmnd *cmd) local_irq_restore(flags); /* we did no complete reset of all commands, so a wakeup is required */ - return SCSI_RESET_WAKEUP | SCSI_RESET_BUS_RESET; + return SUCCESS; #endif /* 1 */ } |