aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/ppa.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/ppa.c')
-rw-r--r--drivers/scsi/ppa.c145
1 files changed, 63 insertions, 82 deletions
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 05347eed9dd..1db8b26063b 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -6,18 +6,17 @@
* (c) 1995,1996 Grant R. Guenther, grant@torque.net,
* under the terms of the GNU General Public License.
*
- * Current Maintainer: David Campbell (Perth, Western Australia, GMT+0800)
- * campbell@torque.net
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/parport.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <scsi/scsi.h>
@@ -33,7 +32,7 @@ typedef struct {
int base; /* Actual port address */
int mode; /* Transfer mode */
struct scsi_cmnd *cur_cmd; /* Current queued command */
- struct work_struct ppa_tq; /* Polling interrupt stuff */
+ struct delayed_work ppa_tq; /* Polling interrupt stuff */
unsigned long jstart; /* Jiffies at start */
unsigned long recon_tmo; /* How many usecs to wait for reconnection (6th bit) */
unsigned int failed:1; /* Failure flag */
@@ -119,8 +118,9 @@ static inline void ppa_pb_release(ppa_struct *dev)
* Also gives a method to use a script to obtain optimum timings (TODO)
*/
-static inline int ppa_proc_write(ppa_struct *dev, char *buffer, int length)
+static inline int ppa_write_info(struct Scsi_Host *host, char *buffer, int length)
{
+ ppa_struct *dev = ppa_dev(host);
unsigned long x;
if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
@@ -131,49 +131,31 @@ static inline int ppa_proc_write(ppa_struct *dev, char *buffer, int length)
if ((length > 10) && (strncmp(buffer, "recon_tmo=", 10) == 0)) {
x = simple_strtoul(buffer + 10, NULL, 0);
dev->recon_tmo = x;
- printk("ppa: recon_tmo set to %ld\n", x);
+ printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x);
return length;
}
- printk("ppa /proc: invalid variable\n");
- return (-EINVAL);
+ printk(KERN_WARNING "ppa /proc: invalid variable\n");
+ return -EINVAL;
}
-static int ppa_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout)
+static int ppa_show_info(struct seq_file *m, struct Scsi_Host *host)
{
- int len = 0;
ppa_struct *dev = ppa_dev(host);
- if (inout)
- return ppa_proc_write(dev, buffer, length);
-
- len += sprintf(buffer + len, "Version : %s\n", PPA_VERSION);
- len +=
- sprintf(buffer + len, "Parport : %s\n",
- dev->dev->port->name);
- len +=
- sprintf(buffer + len, "Mode : %s\n",
- PPA_MODE_STRING[dev->mode]);
+ seq_printf(m, "Version : %s\n", PPA_VERSION);
+ seq_printf(m, "Parport : %s\n", dev->dev->port->name);
+ seq_printf(m, "Mode : %s\n", PPA_MODE_STRING[dev->mode]);
#if PPA_DEBUG > 0
- len +=
- sprintf(buffer + len, "recon_tmo : %lu\n", dev->recon_tmo);
+ seq_printf(m, "recon_tmo : %lu\n", dev->recon_tmo);
#endif
-
- /* Request for beyond end of buffer */
- if (offset > length)
- return 0;
-
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
- return len;
+ return 0;
}
static int device_check(ppa_struct *dev);
#if PPA_DEBUG > 0
#define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
- y, __FUNCTION__, __LINE__); ppa_fail_func(x,y);
+ y, __func__, __LINE__); ppa_fail_func(x,y);
static inline void ppa_fail_func(ppa_struct *dev, int error_code)
#else
static inline void ppa_fail(ppa_struct *dev, int error_code)
@@ -218,7 +200,7 @@ static unsigned char ppa_wait(ppa_struct *dev)
/* Counter expired - Time out occurred */
ppa_fail(dev, DID_TIME_OUT);
- printk("ppa timeout in ppa_wait\n");
+ printk(KERN_WARNING "ppa timeout in ppa_wait\n");
return 0; /* command timed out */
}
@@ -250,7 +232,7 @@ static inline void ecp_sync(ppa_struct *dev)
return;
udelay(5);
}
- printk("ppa: ECP sync failed as data still present in FIFO.\n");
+ printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n");
}
}
@@ -330,7 +312,7 @@ static int ppa_out(ppa_struct *dev, char *buffer, int len)
break;
default:
- printk("PPA: bug in ppa_out()\n");
+ printk(KERN_ERR "PPA: bug in ppa_out()\n");
r = 0;
}
return r;
@@ -383,7 +365,7 @@ static int ppa_in(ppa_struct *dev, char *buffer, int len)
break;
default:
- printk("PPA: bug in ppa_ins()\n");
+ printk(KERN_ERR "PPA: bug in ppa_ins()\n");
r = 0;
break;
}
@@ -610,9 +592,7 @@ static int ppa_completion(struct scsi_cmnd *cmd)
cmd->SCp.buffer++;
cmd->SCp.this_residual =
cmd->SCp.buffer->length;
- cmd->SCp.ptr =
- page_address(cmd->SCp.buffer->page) +
- cmd->SCp.buffer->offset;
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
}
}
/* Now check to see if the drive is ready to comunicate */
@@ -629,17 +609,16 @@ static int ppa_completion(struct scsi_cmnd *cmd)
* the scheduler's task queue to generate a stream of call-backs and
* complete the request when the drive is ready.
*/
-static void ppa_interrupt(void *data)
+static void ppa_interrupt(struct work_struct *work)
{
- ppa_struct *dev = (ppa_struct *) data;
+ ppa_struct *dev = container_of(work, ppa_struct, ppa_tq.work);
struct scsi_cmnd *cmd = dev->cur_cmd;
if (!cmd) {
- printk("PPA: bug in ppa_interrupt\n");
+ printk(KERN_ERR "PPA: bug in ppa_interrupt\n");
return;
}
if (ppa_engine(dev, cmd)) {
- dev->ppa_tq.data = (void *) dev;
schedule_delayed_work(&dev->ppa_tq, 1);
return;
}
@@ -649,31 +628,31 @@ static void ppa_interrupt(void *data)
case DID_OK:
break;
case DID_NO_CONNECT:
- printk("ppa: no device at SCSI ID %i\n", cmd->device->target);
+ printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", cmd->device->target);
break;
case DID_BUS_BUSY:
- printk("ppa: BUS BUSY - EPP timeout detected\n");
+ printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n");
break;
case DID_TIME_OUT:
- printk("ppa: unknown timeout\n");
+ printk(KERN_DEBUG "ppa: unknown timeout\n");
break;
case DID_ABORT:
- printk("ppa: told to abort\n");
+ printk(KERN_DEBUG "ppa: told to abort\n");
break;
case DID_PARITY:
- printk("ppa: parity error (???)\n");
+ printk(KERN_DEBUG "ppa: parity error (???)\n");
break;
case DID_ERROR:
- printk("ppa: internal driver error\n");
+ printk(KERN_DEBUG "ppa: internal driver error\n");
break;
case DID_RESET:
- printk("ppa: told to reset device\n");
+ printk(KERN_DEBUG "ppa: told to reset device\n");
break;
case DID_BAD_INTR:
- printk("ppa: bad interrupt (???)\n");
+ printk(KERN_WARNING "ppa: bad interrupt (???)\n");
break;
default:
- printk("ppa: bad return code (%02x)\n",
+ printk(KERN_WARNING "ppa: bad return code (%02x)\n",
(cmd->result >> 16) & 0xff);
}
#endif
@@ -726,9 +705,8 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
retv--;
if (retv) {
- if ((jiffies - dev->jstart) > (1 * HZ)) {
- printk
- ("ppa: Parallel port cable is unplugged!!\n");
+ if (time_after(jiffies, dev->jstart + (1 * HZ))) {
+ printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n");
ppa_fail(dev, DID_BUS_BUSY);
return 0;
} else {
@@ -756,21 +734,16 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
cmd->SCp.phase++;
case 4: /* Phase 4 - Setup scatter/gather buffers */
- if (cmd->use_sg) {
- /* if many buffers are available, start filling the first */
- cmd->SCp.buffer =
- (struct scatterlist *) cmd->request_buffer;
+ if (scsi_bufflen(cmd)) {
+ cmd->SCp.buffer = scsi_sglist(cmd);
cmd->SCp.this_residual = cmd->SCp.buffer->length;
- cmd->SCp.ptr =
- page_address(cmd->SCp.buffer->page) +
- cmd->SCp.buffer->offset;
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
} else {
- /* else fill the only available buffer */
cmd->SCp.buffer = NULL;
- cmd->SCp.this_residual = cmd->request_bufflen;
- cmd->SCp.ptr = cmd->request_buffer;
+ cmd->SCp.this_residual = 0;
+ cmd->SCp.ptr = NULL;
}
- cmd->SCp.buffers_residual = cmd->use_sg - 1;
+ cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
cmd->SCp.phase++;
case 5: /* Phase 5 - Data transfer stage */
@@ -803,18 +776,18 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
break;
default:
- printk("ppa: Invalid scsi phase\n");
+ printk(KERN_ERR "ppa: Invalid scsi phase\n");
}
return 0;
}
-static int ppa_queuecommand(struct scsi_cmnd *cmd,
+static int ppa_queuecommand_lck(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *))
{
ppa_struct *dev = ppa_dev(cmd->device->host);
if (dev->cur_cmd) {
- printk("PPA: bug in ppa_queuecommand\n");
+ printk(KERN_ERR "PPA: bug in ppa_queuecommand\n");
return 0;
}
dev->failed = 0;
@@ -824,14 +797,15 @@ static int ppa_queuecommand(struct scsi_cmnd *cmd,
cmd->result = DID_ERROR << 16; /* default return code */
cmd->SCp.phase = 0; /* bus free */
- dev->ppa_tq.data = dev;
- schedule_work(&dev->ppa_tq);
+ schedule_delayed_work(&dev->ppa_tq, 0);
ppa_pb_claim(dev);
return 0;
}
+static DEF_SCSI_QCMD(ppa_queuecommand)
+
/*
* Apparently the disk->capacity attribute is off by 1 sector
* for all disk drives. We add the one here, but it should really
@@ -903,7 +877,7 @@ static int device_check(ppa_struct *dev)
/* This routine looks for a device and then attempts to use EPP
to send a command. If all goes as planned then EPP is available. */
- static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
int loop, old_mode, status, k, ppb = dev->base;
unsigned char l;
@@ -913,14 +887,14 @@ static int device_check(ppa_struct *dev)
if ((ppb & 0x0007) == 0x0000)
dev->mode = PPA_EPP_32;
- second_pass:
+second_pass:
ppa_connect(dev, CONNECT_EPP_MAYBE);
/* Select SCSI device */
if (!ppa_select(dev, loop)) {
ppa_disconnect(dev);
continue;
}
- printk("ppa: Found device at ID %i, Attempting to use %s\n",
+ printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n",
loop, PPA_MODE_STRING[dev->mode]);
/* Send SCSI command */
@@ -969,7 +943,7 @@ static int device_check(ppa_struct *dev)
return -EIO;
}
ppa_disconnect(dev);
- printk("ppa: Communication established with ID %i using %s\n",
+ printk(KERN_INFO "ppa: Communication established with ID %i using %s\n",
loop, PPA_MODE_STRING[dev->mode]);
ppa_connect(dev, CONNECT_EPP_MAYBE);
ppa_reset_pulse(ppb);
@@ -981,10 +955,17 @@ static int device_check(ppa_struct *dev)
return -ENODEV;
}
+static int ppa_adjust_queue(struct scsi_device *device)
+{
+ blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
+ return 0;
+}
+
static struct scsi_host_template ppa_template = {
.module = THIS_MODULE,
.proc_name = "ppa",
- .proc_info = ppa_proc_info,
+ .show_info = ppa_show_info,
+ .write_info = ppa_write_info,
.name = "Iomega VPI0 (ppa) interface",
.queuecommand = ppa_queuecommand,
.eh_abort_handler = ppa_abort,
@@ -996,6 +977,7 @@ static struct scsi_host_template ppa_template = {
.cmd_per_lun = 1,
.use_clustering = ENABLE_CLUSTERING,
.can_queue = 1,
+ .slave_alloc = ppa_adjust_queue,
};
/***************************************************************************
@@ -1007,17 +989,16 @@ static LIST_HEAD(ppa_hosts);
static int __ppa_attach(struct parport *pb)
{
struct Scsi_Host *host;
- DECLARE_WAIT_QUEUE_HEAD(waiting);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
DEFINE_WAIT(wait);
ppa_struct *dev;
int ports;
int modes, ppb, ppb_hi;
int err = -ENOMEM;
- dev = kmalloc(sizeof(ppa_struct), GFP_KERNEL);
+ dev = kzalloc(sizeof(ppa_struct), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- memset(dev, 0, sizeof(ppa_struct));
dev->base = -1;
dev->mode = PPA_AUTODETECT;
dev->recon_tmo = PPA_RECON_TMO;
@@ -1081,7 +1062,7 @@ static int __ppa_attach(struct parport *pb)
else
ports = 8;
- INIT_WORK(&dev->ppa_tq, ppa_interrupt, dev);
+ INIT_DELAYED_WORK(&dev->ppa_tq, ppa_interrupt);
err = -ENOMEM;
host = scsi_host_alloc(&ppa_template, sizeof(ppa_struct *));
@@ -1137,7 +1118,7 @@ static struct parport_driver ppa_driver = {
static int __init ppa_driver_init(void)
{
- printk("ppa: Version %s\n", PPA_VERSION);
+ printk(KERN_INFO "ppa: Version %s\n", PPA_VERSION);
return parport_register_driver(&ppa_driver);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-05 18:29:30 +0000