aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001')
-rw-r--r--drivers/scsi/pm8001/Makefile7
-rw-r--r--drivers/scsi/pm8001/pm8001_chips.h4
-rw-r--r--drivers/scsi/pm8001/pm8001_ctl.c218
-rw-r--r--drivers/scsi/pm8001/pm8001_ctl.h6
-rw-r--r--drivers/scsi/pm8001/pm8001_defs.h41
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c1540
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.h19
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c555
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c374
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h295
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c4529
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.h1532
12 files changed, 8324 insertions, 796 deletions
diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
index 52f04296171..ce4cd87c7c6 100644
--- a/drivers/scsi/pm8001/Makefile
+++ b/drivers/scsi/pm8001/Makefile
@@ -4,9 +4,10 @@
# Copyright (C) 2008-2009 USI Co., Ltd.
-obj-$(CONFIG_SCSI_PM8001) += pm8001.o
-pm8001-y += pm8001_init.o \
+obj-$(CONFIG_SCSI_PM8001) += pm80xx.o
+pm80xx-y += pm8001_init.o \
pm8001_sas.o \
pm8001_ctl.o \
- pm8001_hwi.o
+ pm8001_hwi.o \
+ pm80xx_hwi.o
diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h
index 4efa4d0950e..9241c782603 100644
--- a/drivers/scsi/pm8001/pm8001_chips.h
+++ b/drivers/scsi/pm8001/pm8001_chips.h
@@ -46,9 +46,9 @@ static inline u32 pm8001_read_32(void *virt_addr)
return *((u32 *)virt_addr);
}
-static inline void pm8001_write_32(void *addr, u32 offset, u32 val)
+static inline void pm8001_write_32(void *addr, u32 offset, __le32 val)
{
- *((u32 *)(addr + offset)) = val;
+ *((__le32 *)(addr + offset)) = val;
}
static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 45bc197bc22..a368d77b8d4 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -1,5 +1,5 @@
/*
- * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
*
* Copyright (c) 2008-2009 USI Co., Ltd.
* All rights reserved.
@@ -58,8 +58,13 @@ static ssize_t pm8001_ctl_mpi_interface_rev_show(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- return snprintf(buf, PAGE_SIZE, "%d\n",
- pm8001_ha->main_cfg_tbl.interface_rev);
+ if (pm8001_ha->chip_id == chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev);
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev);
+ }
}
static
DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
@@ -78,11 +83,19 @@ static ssize_t pm8001_ctl_fw_version_show(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
- (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 24),
- (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 16),
- (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 8),
- (u8)(pm8001_ha->main_cfg_tbl.firmware_rev));
+ if (pm8001_ha->chip_id == chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev));
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev));
+ }
}
static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
/**
@@ -99,8 +112,13 @@ static ssize_t pm8001_ctl_max_out_io_show(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- return snprintf(buf, PAGE_SIZE, "%d\n",
- pm8001_ha->main_cfg_tbl.max_out_io);
+ if (pm8001_ha->chip_id == chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io);
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io);
+ }
}
static DEVICE_ATTR(max_out_io, S_IRUGO, pm8001_ctl_max_out_io_show, NULL);
/**
@@ -117,8 +135,15 @@ static ssize_t pm8001_ctl_max_devices_show(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- return snprintf(buf, PAGE_SIZE, "%04d\n",
- (u16)(pm8001_ha->main_cfg_tbl.max_sgl >> 16));
+ if (pm8001_ha->chip_id == chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ (u16)(pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl >> 16)
+ );
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ (u16)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl >> 16)
+ );
+ }
}
static DEVICE_ATTR(max_devices, S_IRUGO, pm8001_ctl_max_devices_show, NULL);
/**
@@ -136,8 +161,15 @@ static ssize_t pm8001_ctl_max_sg_list_show(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- return snprintf(buf, PAGE_SIZE, "%04d\n",
- pm8001_ha->main_cfg_tbl.max_sgl & 0x0000FFFF);
+ if (pm8001_ha->chip_id == chip_8001) {
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl & 0x0000FFFF
+ );
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl & 0x0000FFFF
+ );
+ }
}
static DEVICE_ATTR(max_sg_list, S_IRUGO, pm8001_ctl_max_sg_list_show, NULL);
@@ -173,7 +205,14 @@ static ssize_t pm8001_ctl_sas_spec_support_show(struct device *cdev,
struct Scsi_Host *shost = class_to_shost(cdev);
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
- mode = (pm8001_ha->main_cfg_tbl.ctrl_cap_flag & 0xfe000000)>>25;
+ /* fe000000 means supports SAS2.1 */
+ if (pm8001_ha->chip_id == chip_8001)
+ mode = (pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag &
+ 0xfe000000)>>25;
+ else
+ /* fe000000 means supports SAS2.1 */
+ mode = (pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag &
+ 0xfe000000)>>25;
return show_sas_spec_support_status(mode, buf);
}
static DEVICE_ATTR(sas_spec_support, S_IRUGO,
@@ -270,6 +309,106 @@ static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
}
static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
/**
+ * pm8001_ctl_ib_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @buf: the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int offset;
+ char *str = buf;
+ int start = 0;
+#define IB_MEMMAP(c) \
+ (*(u32 *)((u8 *)pm8001_ha-> \
+ memoryMap.region[IB].virt_ptr + \
+ pm8001_ha->evtlog_ib_offset + (c)))
+
+ for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+ str += sprintf(str, "0x%08x\n", IB_MEMMAP(start));
+ start = start + 4;
+ }
+ pm8001_ha->evtlog_ib_offset += SYSFS_OFFSET;
+ if (((pm8001_ha->evtlog_ib_offset) % (PM80XX_IB_OB_QUEUE_SIZE)) == 0)
+ pm8001_ha->evtlog_ib_offset = 0;
+
+ return str - buf;
+}
+
+static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL);
+/**
+ * pm8001_ctl_ob_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @buf: the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+
+static ssize_t pm8001_ctl_ob_queue_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int offset;
+ char *str = buf;
+ int start = 0;
+#define OB_MEMMAP(c) \
+ (*(u32 *)((u8 *)pm8001_ha-> \
+ memoryMap.region[OB].virt_ptr + \
+ pm8001_ha->evtlog_ob_offset + (c)))
+
+ for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+ str += sprintf(str, "0x%08x\n", OB_MEMMAP(start));
+ start = start + 4;
+ }
+ pm8001_ha->evtlog_ob_offset += SYSFS_OFFSET;
+ if (((pm8001_ha->evtlog_ob_offset) % (PM80XX_IB_OB_QUEUE_SIZE)) == 0)
+ pm8001_ha->evtlog_ob_offset = 0;
+
+ return str - buf;
+}
+static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL);
+/**
+ * pm8001_ctl_bios_version_show - Bios version Display
+ * @cdev:pointer to embedded class device
+ * @buf:the buffer returned
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_bios_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ char *str = buf;
+ void *virt_addr;
+ int bios_index;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+
+ pm8001_ha->nvmd_completion = &completion;
+ payload.minor_function = 7;
+ payload.offset = 0;
+ payload.length = 4096;
+ payload.func_specific = kzalloc(4096, GFP_KERNEL);
+ if (!payload.func_specific)
+ return -ENOMEM;
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+ wait_for_completion(&completion);
+ virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
+ for (bios_index = BIOSOFFSET; bios_index < BIOS_OFFSET_LIMIT;
+ bios_index++)
+ str += sprintf(str, "%c",
+ *((u8 *)((u8 *)virt_addr+bios_index)));
+ kfree(payload.func_specific);
+ return str - buf;
+}
+static DEVICE_ATTR(bios_version, S_IRUGO, pm8001_ctl_bios_version_show, NULL);
+/**
* pm8001_ctl_aap_log_show - IOP event log
* @cdev: pointer to embedded class device
* @buf: the buffer returned
@@ -305,6 +444,43 @@ static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
}
static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
+/**
+ ** pm8001_ctl_fatal_log_show - fatal error logging
+ ** @cdev:pointer to embedded class device
+ ** @buf: the buffer returned
+ **
+ ** A sysfs 'read-only' shost attribute.
+ **/
+
+static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t count;
+
+ count = pm80xx_get_fatal_dump(cdev, attr, buf);
+ return count;
+}
+
+static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
+
+
+/**
+ ** pm8001_ctl_gsm_log_show - gsm dump collection
+ ** @cdev:pointer to embedded class device
+ ** @buf: the buffer returned
+ **A sysfs 'read-only' shost attribute.
+ **/
+static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t count;
+
+ count = pm8001_get_gsm_dump(cdev, SYSFS_OFFSET, buf);
+ return count;
+}
+
+static DEVICE_ATTR(gsm_log, S_IRUGO, pm8001_ctl_gsm_log_show, NULL);
+
#define FLASH_CMD_NONE 0x00
#define FLASH_CMD_UPDATE 0x01
#define FLASH_CMD_SET_NVMD 0x02
@@ -361,10 +537,11 @@ static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
goto out;
}
payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
- memcpy((u8 *)payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
+ memcpy((u8 *)&payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
pm8001_ha->fw_image->size);
payload->length = pm8001_ha->fw_image->size;
payload->id = 0;
+ payload->minor_function = 0x1;
pm8001_ha->nvmd_completion = &completion;
ret = PM8001_CHIP_DISP->set_nvmd_req(pm8001_ha, payload);
wait_for_completion(&completion);
@@ -411,7 +588,7 @@ static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
payload->length = 1024*16;
payload->id = 0;
fwControl =
- (struct fw_control_info *)payload->func_specific;
+ (struct fw_control_info *)&payload->func_specific;
fwControl->len = IOCTL_BUF_SIZE; /* IN */
fwControl->size = partitionSize + HEADER_LEN;/* IN */
fwControl->retcode = 0;/* OUT */
@@ -555,7 +732,7 @@ static ssize_t pm8001_show_update_fw(struct device *cdev,
flash_error_table[i].reason);
}
-static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUGO,
+static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUSR|S_IWGRP,
pm8001_show_update_fw, pm8001_store_update_fw);
struct device_attribute *pm8001_host_attrs[] = {
&dev_attr_interface_rev,
@@ -563,12 +740,17 @@ struct device_attribute *pm8001_host_attrs[] = {
&dev_attr_update_fw,
&dev_attr_aap_log,
&dev_attr_iop_log,
+ &dev_attr_fatal_log,
+ &dev_attr_gsm_log,
&dev_attr_max_out_io,
&dev_attr_max_devices,
&dev_attr_max_sg_list,
&dev_attr_sas_spec_support,
&dev_attr_logging_level,
&dev_attr_host_sas_address,
+ &dev_attr_bios_version,
+ &dev_attr_ib_log,
+ &dev_attr_ob_log,
NULL,
};
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
index 63ad4aa0c42..d0d43a250b9 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.h
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -45,6 +45,8 @@
#define HEADER_LEN 28
#define SIZE_OFFSET 16
+#define BIOSOFFSET 56
+#define BIOS_OFFSET_LIMIT 61
#define FLASH_OK 0x000000
#define FAIL_OPEN_BIOS_FILE 0x000100
@@ -53,5 +55,9 @@
#define FAIL_OUT_MEMORY 0x000c00
#define FLASH_IN_PROGRESS 0x001000
+#define IB_OB_READ_TIMES 256
+#define SYSFS_OFFSET 1024
+#define PM80XX_IB_OB_QUEUE_SIZE (32 * 1024)
+#define PM8001_IB_OB_QUEUE_SIZE (16 * 1024)
#endif /* PM8001_CTL_H_INCLUDED */
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
index 944afada61e..74a4bb9af07 100644
--- a/drivers/scsi/pm8001/pm8001_defs.h
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -1,5 +1,5 @@
/*
- * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
*
* Copyright (c) 2008-2009 USI Co., Ltd.
* All rights reserved.
@@ -43,9 +43,15 @@
enum chip_flavors {
chip_8001,
+ chip_8008,
+ chip_8009,
+ chip_8018,
+ chip_8019,
+ chip_8074,
+ chip_8076,
+ chip_8077
};
-#define USI_MAX_MEMCNT 9
-#define PM8001_MAX_DMA_SG SG_ALL
+
enum phy_speed {
PHY_SPEED_15 = 0x01,
PHY_SPEED_30 = 0x02,
@@ -66,25 +72,38 @@ enum port_type {
/* driver compile-time configuration */
#define PM8001_MAX_CCB 512 /* max ccbs supported */
+#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
#define PM8001_MAX_INB_NUM 1
#define PM8001_MAX_OUTB_NUM 1
-#define PM8001_CAN_QUEUE 128 /* SCSI Queue depth */
+#define PM8001_MAX_SPCV_INB_NUM 1
+#define PM8001_MAX_SPCV_OUTB_NUM 4
+#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
+
+/* Inbound/Outbound queue size */
+#define IOMB_SIZE_SPC 64
+#define IOMB_SIZE_SPCV 128
/* unchangeable hardware details */
-#define PM8001_MAX_PHYS 8 /* max. possible phys */
-#define PM8001_MAX_PORTS 8 /* max. possible ports */
-#define PM8001_MAX_DEVICES 1024 /* max supported device */
+#define PM8001_MAX_PHYS 16 /* max. possible phys */
+#define PM8001_MAX_PORTS 16 /* max. possible ports */
+#define PM8001_MAX_DEVICES 2048 /* max supported device */
+#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
+#define USI_MAX_MEMCNT_BASE 5
+#define IB (USI_MAX_MEMCNT_BASE + 1)
+#define CI (IB + PM8001_MAX_SPCV_INB_NUM)
+#define OB (CI + PM8001_MAX_SPCV_INB_NUM)
+#define PI (OB + PM8001_MAX_SPCV_OUTB_NUM)
+#define USI_MAX_MEMCNT (PI + PM8001_MAX_SPCV_OUTB_NUM)
+#define PM8001_MAX_DMA_SG SG_ALL
enum memory_region_num {
AAP1 = 0x0, /* application acceleration processor */
IOP, /* IO processor */
- CI, /* consumer index */
- PI, /* producer index */
- IB, /* inbound queue */
- OB, /* outbound queue */
NVMD, /* NVM device */
DEV_MEM, /* memory for devices */
CCB_MEM, /* memory for command control block */
+ FW_FLASH, /* memory for fw flash update */
+ FORENSIC_MEM /* memory for fw forensic data */
};
#define PM8001_EVENT_LOG_SIZE (128 * 1024)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index d8db0137c0c..a97be015e52 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -47,35 +47,42 @@
* read_main_config_table - read the configure table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
- pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00);
- pm8001_ha->main_cfg_tbl.interface_rev = pm8001_mr32(address, 0x04);
- pm8001_ha->main_cfg_tbl.firmware_rev = pm8001_mr32(address, 0x08);
- pm8001_ha->main_cfg_tbl.max_out_io = pm8001_mr32(address, 0x0C);
- pm8001_ha->main_cfg_tbl.max_sgl = pm8001_mr32(address, 0x10);
- pm8001_ha->main_cfg_tbl.ctrl_cap_flag = pm8001_mr32(address, 0x14);
- pm8001_ha->main_cfg_tbl.gst_offset = pm8001_mr32(address, 0x18);
- pm8001_ha->main_cfg_tbl.inbound_queue_offset =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.signature =
+ pm8001_mr32(address, 0x00);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev =
+ pm8001_mr32(address, 0x04);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev =
+ pm8001_mr32(address, 0x08);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io =
+ pm8001_mr32(address, 0x0C);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl =
+ pm8001_mr32(address, 0x10);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag =
+ pm8001_mr32(address, 0x14);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.gst_offset =
+ pm8001_mr32(address, 0x18);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_queue_offset =
pm8001_mr32(address, MAIN_IBQ_OFFSET);
- pm8001_ha->main_cfg_tbl.outbound_queue_offset =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_queue_offset =
pm8001_mr32(address, MAIN_OBQ_OFFSET);
- pm8001_ha->main_cfg_tbl.hda_mode_flag =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.hda_mode_flag =
pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
/* read analog Setting offset from the configuration table */
- pm8001_ha->main_cfg_tbl.anolog_setup_table_offset =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.anolog_setup_table_offset =
pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
/* read Error Dump Offset and Length */
- pm8001_ha->main_cfg_tbl.fatal_err_dump_offset0 =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset0 =
pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
- pm8001_ha->main_cfg_tbl.fatal_err_dump_length0 =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length0 =
pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
- pm8001_ha->main_cfg_tbl.fatal_err_dump_offset1 =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset1 =
pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
- pm8001_ha->main_cfg_tbl.fatal_err_dump_length1 =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length1 =
pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
}
@@ -83,48 +90,70 @@ static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
* read_general_status_table - read the general status table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->general_stat_tbl_addr;
- pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00);
- pm8001_ha->gs_tbl.iq_freeze_state0 = pm8001_mr32(address, 0x04);
- pm8001_ha->gs_tbl.iq_freeze_state1 = pm8001_mr32(address, 0x08);
- pm8001_ha->gs_tbl.msgu_tcnt = pm8001_mr32(address, 0x0C);
- pm8001_ha->gs_tbl.iop_tcnt = pm8001_mr32(address, 0x10);
- pm8001_ha->gs_tbl.reserved = pm8001_mr32(address, 0x14);
- pm8001_ha->gs_tbl.phy_state[0] = pm8001_mr32(address, 0x18);
- pm8001_ha->gs_tbl.phy_state[1] = pm8001_mr32(address, 0x1C);
- pm8001_ha->gs_tbl.phy_state[2] = pm8001_mr32(address, 0x20);
- pm8001_ha->gs_tbl.phy_state[3] = pm8001_mr32(address, 0x24);
- pm8001_ha->gs_tbl.phy_state[4] = pm8001_mr32(address, 0x28);
- pm8001_ha->gs_tbl.phy_state[5] = pm8001_mr32(address, 0x2C);
- pm8001_ha->gs_tbl.phy_state[6] = pm8001_mr32(address, 0x30);
- pm8001_ha->gs_tbl.phy_state[7] = pm8001_mr32(address, 0x34);
- pm8001_ha->gs_tbl.reserved1 = pm8001_mr32(address, 0x38);
- pm8001_ha->gs_tbl.reserved2 = pm8001_mr32(address, 0x3C);
- pm8001_ha->gs_tbl.reserved3 = pm8001_mr32(address, 0x40);
- pm8001_ha->gs_tbl.recover_err_info[0] = pm8001_mr32(address, 0x44);
- pm8001_ha->gs_tbl.recover_err_info[1] = pm8001_mr32(address, 0x48);
- pm8001_ha->gs_tbl.recover_err_info[2] = pm8001_mr32(address, 0x4C);
- pm8001_ha->gs_tbl.recover_err_info[3] = pm8001_mr32(address, 0x50);
- pm8001_ha->gs_tbl.recover_err_info[4] = pm8001_mr32(address, 0x54);
- pm8001_ha->gs_tbl.recover_err_info[5] = pm8001_mr32(address, 0x58);
- pm8001_ha->gs_tbl.recover_err_info[6] = pm8001_mr32(address, 0x5C);
- pm8001_ha->gs_tbl.recover_err_info[7] = pm8001_mr32(address, 0x60);
+ pm8001_ha->gs_tbl.pm8001_tbl.gst_len_mpistate =
+ pm8001_mr32(address, 0x00);
+ pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state0 =
+ pm8001_mr32(address, 0x04);
+ pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state1 =
+ pm8001_mr32(address, 0x08);
+ pm8001_ha->gs_tbl.pm8001_tbl.msgu_tcnt =
+ pm8001_mr32(address, 0x0C);
+ pm8001_ha->gs_tbl.pm8001_tbl.iop_tcnt =
+ pm8001_mr32(address, 0x10);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd =
+ pm8001_mr32(address, 0x14);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[0] =
+ pm8001_mr32(address, 0x18);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[1] =
+ pm8001_mr32(address, 0x1C);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[2] =
+ pm8001_mr32(address, 0x20);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[3] =
+ pm8001_mr32(address, 0x24);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[4] =
+ pm8001_mr32(address, 0x28);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[5] =
+ pm8001_mr32(address, 0x2C);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[6] =
+ pm8001_mr32(address, 0x30);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[7] =
+ pm8001_mr32(address, 0x34);
+ pm8001_ha->gs_tbl.pm8001_tbl.gpio_input_val =
+ pm8001_mr32(address, 0x38);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[0] =
+ pm8001_mr32(address, 0x3C);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[1] =
+ pm8001_mr32(address, 0x40);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[0] =
+ pm8001_mr32(address, 0x44);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[1] =
+ pm8001_mr32(address, 0x48);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[2] =
+ pm8001_mr32(address, 0x4C);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[3] =
+ pm8001_mr32(address, 0x50);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[4] =
+ pm8001_mr32(address, 0x54);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[5] =
+ pm8001_mr32(address, 0x58);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[6] =
+ pm8001_mr32(address, 0x5C);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[7] =
+ pm8001_mr32(address, 0x60);
}
/**
* read_inbnd_queue_table - read the inbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
- int inbQ_num = 1;
int i;
void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
- for (i = 0; i < inbQ_num; i++) {
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
u32 offset = i * 0x20;
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
@@ -137,13 +166,11 @@ read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
* read_outbnd_queue_table - read the outbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
- int outbQ_num = 1;
int i;
void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
- for (i = 0; i < outbQ_num; i++) {
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
u32 offset = i * 0x24;
pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
@@ -156,57 +183,59 @@ read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
* init_default_table_values - init the default table.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
{
- int qn = 1;
int i;
u32 offsetib, offsetob;
void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
- pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd = 0;
- pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3 = 0;
- pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7 = 0;
- pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3 = 0;
- pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3 = 0;
- pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7 = 0;
-
- pm8001_ha->main_cfg_tbl.upper_event_log_addr =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid0_3 =
+ 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid4_7 =
+ 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid4_7 = 0;
+
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr =
pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
- pm8001_ha->main_cfg_tbl.lower_event_log_addr =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr =
pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
- pm8001_ha->main_cfg_tbl.event_log_size = PM8001_EVENT_LOG_SIZE;
- pm8001_ha->main_cfg_tbl.event_log_option = 0x01;
- pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr =
pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
- pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr =
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr =
pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
- pm8001_ha->main_cfg_tbl.iop_event_log_size = PM8001_EVENT_LOG_SIZE;
- pm8001_ha->main_cfg_tbl.iop_event_log_option = 0x01;
- pm8001_ha->main_cfg_tbl.fatal_err_interrupt = 0x01;
- for (i = 0; i < qn; i++) {
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01;
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
- 0x00000100 | (0x00000040 << 16) | (0x00<<30);
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[IB].phys_addr_hi;
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[IB].phys_addr_lo;
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[IB].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
pm8001_ha->inbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[IB].total_len;
+ pm8001_ha->memoryMap.region[IB + i].total_len;
pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
- pm8001_ha->memoryMap.region[CI].phys_addr_hi;
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
- pm8001_ha->memoryMap.region[CI].phys_addr_lo;
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
pm8001_ha->inbnd_q_tbl[i].ci_virt =
- pm8001_ha->memoryMap.region[CI].virt_ptr;
+ pm8001_ha->memoryMap.region[CI + i].virt_ptr;
offsetib = i * 0x20;
pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
get_pci_bar_index(pm8001_mr32(addressib,
@@ -216,25 +245,25 @@ init_default_table_values(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
}
- for (i = 0; i < qn; i++) {
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
- 256 | (64 << 16) | (1<<30);
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
- pm8001_ha->memoryMap.region[OB].phys_addr_hi;
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
- pm8001_ha->memoryMap.region[OB].phys_addr_lo;
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
pm8001_ha->outbnd_q_tbl[i].base_virt =
- (u8 *)pm8001_ha->memoryMap.region[OB].virt_ptr;
+ (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
pm8001_ha->outbnd_q_tbl[i].total_length =
- pm8001_ha->memoryMap.region[OB].total_len;
+ pm8001_ha->memoryMap.region[OB + i].total_len;
pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
- pm8001_ha->memoryMap.region[PI].phys_addr_hi;
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
- pm8001_ha->memoryMap.region[PI].phys_addr_lo;
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay =
- 0 | (10 << 16) | (0 << 24);
+ 0 | (10 << 16) | (i << 24);
pm8001_ha->outbnd_q_tbl[i].pi_virt =
- pm8001_ha->memoryMap.region[PI].virt_ptr;
+ pm8001_ha->memoryMap.region[PI + i].virt_ptr;
offsetob = i * 0x24;
pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
get_pci_bar_index(pm8001_mr32(addressob,
@@ -250,55 +279,63 @@ init_default_table_values(struct pm8001_hba_info *pm8001_ha)
* update_main_config_table - update the main default table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
pm8001_mw32(address, 0x24,
- pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd);
pm8001_mw32(address, 0x28,
- pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3);
pm8001_mw32(address, 0x2C,
- pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7);
pm8001_mw32(address, 0x30,
- pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3);
pm8001_mw32(address, 0x34,
- pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7);
pm8001_mw32(address, 0x38,
- pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ITNexus_event_pid0_3);
pm8001_mw32(address, 0x3C,
- pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ITNexus_event_pid4_7);
pm8001_mw32(address, 0x40,
- pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ssp_event_pid0_3);
pm8001_mw32(address, 0x44,
- pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ssp_event_pid4_7);
pm8001_mw32(address, 0x48,
- pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_smp_event_pid0_3);
pm8001_mw32(address, 0x4C,
- pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_smp_event_pid4_7);
pm8001_mw32(address, 0x50,
- pm8001_ha->main_cfg_tbl.upper_event_log_addr);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr);
pm8001_mw32(address, 0x54,
- pm8001_ha->main_cfg_tbl.lower_event_log_addr);
- pm8001_mw32(address, 0x58, pm8001_ha->main_cfg_tbl.event_log_size);
- pm8001_mw32(address, 0x5C, pm8001_ha->main_cfg_tbl.event_log_option);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr);
+ pm8001_mw32(address, 0x58,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size);
+ pm8001_mw32(address, 0x5C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option);
pm8001_mw32(address, 0x60,
- pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr);
pm8001_mw32(address, 0x64,
- pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr);
- pm8001_mw32(address, 0x68, pm8001_ha->main_cfg_tbl.iop_event_log_size);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr);
+ pm8001_mw32(address, 0x68,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size);
pm8001_mw32(address, 0x6C,
- pm8001_ha->main_cfg_tbl.iop_event_log_option);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option);
pm8001_mw32(address, 0x70,
- pm8001_ha->main_cfg_tbl.fatal_err_interrupt);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt);
}
/**
* update_inbnd_queue_table - update the inbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
u16 offset = number * 0x20;
@@ -318,8 +355,8 @@ update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
* update_outbnd_queue_table - update the outbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
u16 offset = number * 0x24;
@@ -338,26 +375,25 @@ update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
}
/**
- * bar4_shift - function is called to shift BAR base address
+ * pm8001_bar4_shift - function is called to shift BAR base address
* @pm8001_ha : our hba card infomation
* @shiftValue : shifting value in memory bar.
*/
-static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
{
u32 regVal;
- u32 max_wait_count;
+ unsigned long start;
/* program the inbound AXI translation Lower Address */
pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
/* confirm the setting is written */
- max_wait_count = 1 * 1000 * 1000; /* 1 sec */
+ start = jiffies + HZ; /* 1 sec */
do {
- udelay(1);
regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
- } while ((regVal != shiftValue) && (--max_wait_count));
+ } while ((regVal != shiftValue) && time_before(jiffies, start));
- if (!max_wait_count) {
+ if (regVal != shiftValue) {
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
" = 0x%x\n", regVal));
@@ -371,10 +407,11 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
* @pm8001_ha: our hba card information
* @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
*/
-static void __devinit
-mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+ u32 SSCbit)
{
u32 value, offset, i;
+ unsigned long flags;
#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
@@ -388,16 +425,23 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
* Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
* Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
*/
- if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
+ }
for (i = 0; i < 4; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
}
/* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
- if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
+ }
for (i = 4; i < 8; i++) {
offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
@@ -421,7 +465,8 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
/*set the shifted destination address to 0x0 to avoid error operation */
- bar4_shift(pm8001_ha, 0x0);
+ pm8001_bar4_shift(pm8001_ha, 0x0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
}
@@ -430,13 +475,13 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
* @pm8001_ha: our hba card information
* @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
*/
-static void __devinit
-mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
- u32 interval)
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+ u32 interval)
{
u32 offset;
u32 value;
u32 i;
+ unsigned long flags;
#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
@@ -445,24 +490,30 @@ mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
/* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
- if (-1 == bar4_shift(pm8001_ha,
- OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR))
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
+ }
for (i = 0; i < 4; i++) {
offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
pm8001_cw32(pm8001_ha, 2, offset, value);
}
- if (-1 == bar4_shift(pm8001_ha,
- OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR))
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
+ }
for (i = 4; i < 8; i++) {
offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
pm8001_cw32(pm8001_ha, 2, offset, value);
}
/*set the shifted destination address to 0x0 to avoid error operation */
- bar4_shift(pm8001_ha, 0x0);
+ pm8001_bar4_shift(pm8001_ha, 0x0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return;
}
@@ -567,11 +618,11 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
value = pm8001_cr32(pm8001_ha, 0, 0x44);
offset = value & 0x03FFFFFF;
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 Offset: %x \n", offset));
+ pm8001_printk("Scratchpad 0 Offset: %x\n", offset));
pcilogic = (value & 0xFC000000) >> 26;
pcibar = get_pci_bar_index(pcilogic);
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("Scratchpad 0 PCI BAR: %d \n", pcibar));
+ pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
pm8001_ha->general_stat_tbl_addr =
@@ -586,8 +637,21 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
* pm8001_chip_init - the main init function that initialize whole PM8001 chip.
* @pm8001_ha: our hba card information
*/
-static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
{
+ u8 i = 0;
+ u16 deviceid;
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+ /* 8081 controllers need BAR shift to access MPI space
+ * as this is shared with BIOS data */
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE));
+ return -1;
+ }
+ }
/* check the firmware status */
if (-1 == check_fw_ready(pm8001_ha)) {
PM8001_FAIL_DBG(pm8001_ha,
@@ -604,10 +668,16 @@ static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
read_outbnd_queue_table(pm8001_ha);
/* update main config table ,inbound table and outbound table */
update_main_config_table(pm8001_ha);
- update_inbnd_queue_table(pm8001_ha, 0);
- update_outbnd_queue_table(pm8001_ha, 0);
- mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
- mpi_set_open_retry_interval_reg(pm8001_ha, 7);
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++)
+ update_inbnd_queue_table(pm8001_ha, i);
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++)
+ update_outbnd_queue_table(pm8001_ha, i);
+ /* 8081 controller donot require these operations */
+ if (deviceid != 0x8081 && deviceid != 0x0042) {
+ mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
+ /* 7->130ms, 34->500ms, 119->1.5s */
+ mpi_set_open_retry_interval_reg(pm8001_ha, 119);
+ }
/* notify firmware update finished and check initialization status */
if (0 == mpi_init_check(pm8001_ha)) {
PM8001_INIT_DBG(pm8001_ha,
@@ -629,6 +699,16 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
u32 max_wait_count;
u32 value;
u32 gst_len_mpistate;
+ u16 deviceid;
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE));
+ return -1;
+ }
+ }
init_pci_device_addresses(pm8001_ha);
/* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
table is stop */
@@ -688,8 +768,11 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("Firmware is ready for reset .\n"));
} else {
- /* Trigger NMI twice via RB6 */
- if (-1 == bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+ unsigned long flags;
+ /* Trigger NMI twice via RB6 */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
RB6_ACCESS_REG));
@@ -715,8 +798,10 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
}
return 0;
}
@@ -725,14 +810,15 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
* pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
* the FW register status to the originated status.
* @pm8001_ha: our hba card information
- * @signature: signature in host scratch pad0 register.
*/
static int
-pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
+pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
{
u32 regVal, toggleVal;
u32 max_wait_count;
u32 regVal1, regVal2, regVal3;
+ u32 signature = 0x252acbcd; /* for host scratch pad0 */
+ unsigned long flags;
/* step1: Check FW is ready for soft reset */
if (soft_reset_ready_check(pm8001_ha) != 0) {
@@ -743,7 +829,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* step 2: clear NMI status register on AAP1 and IOP, write the same
value to clear */
/* map 0x60000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
MBIC_AAP1_ADDR_BASE));
@@ -754,7 +842,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
/* map 0x70000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
MBIC_IOP_ADDR_BASE));
@@ -796,7 +885,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* read required registers for confirmming */
/* map 0x0700000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
GSM_ADDR_BASE));
@@ -862,7 +952,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* step 5: delay 10 usec */
udelay(10);
/* step 5-b: set GPIO-0 output control to tristate anyway */
- if (-1 == bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
GPIO_ADDR_BASE));
@@ -878,7 +969,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* Step 6: Reset the IOP and AAP1 */
/* map 0x00000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
SPC_TOP_LEVEL_ADDR_BASE));
@@ -915,7 +1007,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* step 11: reads and sets the GSM Configuration and Reset Register */
/* map 0x0700000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
GSM_ADDR_BASE));
@@ -968,7 +1061,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
/* step 13: bring the IOP and AAP1 out of reset */
/* map 0x00000 to BAR4(0x20), BAR2(win) */
- if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Shift Bar4 to 0x%x failed\n",
SPC_TOP_LEVEL_ADDR_BASE));
@@ -1010,6 +1104,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
pm8001_cr32(pm8001_ha, 0,
MSGU_SCRATCH_PAD_3)));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
@@ -1039,9 +1134,12 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
pm8001_cr32(pm8001_ha, 0,
MSGU_SCRATCH_PAD_3)));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return -1;
}
}
+ pm8001_bar4_shift(pm8001_ha, 0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("SPC soft reset Complete\n"));
@@ -1085,7 +1183,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
* pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
-static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
{
s8 bar, logical = 0;
for (bar = 0; bar < 6; bar++) {
@@ -1157,14 +1255,14 @@ pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
msi_index += MSIX_TABLE_BASE;
pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE);
-
}
+
/**
* pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
* @pm8001_ha: our hba card information
*/
static void
-pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
#ifdef PM8001_USE_MSIX
pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
@@ -1179,7 +1277,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
* @pm8001_ha: our hba card information
*/
static void
-pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
#ifdef PM8001_USE_MSIX
pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
@@ -1190,12 +1288,13 @@ pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
}
/**
- * mpi_msg_free_get- get the free message buffer for transfer inbound queue.
+ * pm8001_mpi_msg_free_get - get the free message buffer for transfer
+ * inbound queue.
* @circularQ: the inbound queue we want to transfer to HBA.
* @messageSize: the message size of this transfer, normally it is 64 bytes
* @messagePtr: the pointer to message.
*/
-static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
u16 messageSize, void **messagePtr)
{
u32 offset, consumer_index;
@@ -1203,7 +1302,7 @@ static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
u8 bcCount = 1; /* only support single buffer */
/* Checks is the requested message size can be allocated in this queue*/
- if (messageSize > 64) {
+ if (messageSize > IOMB_SIZE_SPCV) {
*messagePtr = NULL;
return -1;
}
@@ -1211,15 +1310,16 @@ static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
/* Stores the new consumer index */
consumer_index = pm8001_read_32(circularQ->ci_virt);
circularQ->consumer_index = cpu_to_le32(consumer_index);
- if (((circularQ->producer_idx + bcCount) % 256) ==
- circularQ->consumer_index) {
+ if (((circularQ->producer_idx + bcCount) % PM8001_MPI_QUEUE) ==
+ le32_to_cpu(circularQ->consumer_index)) {
*messagePtr = NULL;
return -1;
}
/* get memory IOMB buffer address */
- offset = circularQ->producer_idx * 64;
+ offset = circularQ->producer_idx * messageSize;
/* increment to next bcCount element */
- circularQ->producer_idx = (circularQ->producer_idx + bcCount) % 256;
+ circularQ->producer_idx = (circularQ->producer_idx + bcCount)
+ % PM8001_MPI_QUEUE;
/* Adds that distance to the base of the region virtual address plus
the message header size*/
msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + offset);
@@ -1228,29 +1328,30 @@ static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
}
/**
- * mpi_build_cmd- build the message queue for transfer, update the PI to FW
- * to tell the fw to get this message from IOMB.
+ * pm8001_mpi_build_cmd- build the message queue for transfer, update the PI to
+ * FW to tell the fw to get this message from IOMB.
* @pm8001_ha: our hba card information
* @circularQ: the inbound queue we want to transfer to HBA.
* @opCode: the operation code represents commands which LLDD and fw recognized.
* @payload: the command payload of each operation command.
*/
-static int mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
struct inbound_queue_table *circularQ,
- u32 opCode, void *payload)
+ u32 opCode, void *payload, u32 responseQueue)
{
u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
- u32 responseQueue = 0;
void *pMessage;
- if (mpi_msg_free_get(circularQ, 64, &pMessage) < 0) {
+ if (pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
+ &pMessage) < 0) {
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("No free mpi buffer \n"));
+ pm8001_printk("No free mpi buffer\n"));
return -1;
}
BUG_ON(!payload);
/*Copy to the payload*/
- memcpy(pMessage, payload, (64 - sizeof(struct mpi_msg_hdr)));
+ memcpy(pMessage, payload, (pm8001_ha->iomb_size -
+ sizeof(struct mpi_msg_hdr)));
/*Build the header*/
Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
@@ -1262,12 +1363,13 @@ static int mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
circularQ->pi_offset, circularQ->producer_idx);
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("after PI= %d CI= %d \n", circularQ->producer_idx,
- circularQ->consumer_index));
+ pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
+ responseQueue, opCode, circularQ->producer_idx,
+ circularQ->consumer_index));
return 0;
}
-static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
struct outbound_queue_table *circularQ, u8 bc)
{
u32 producer_index;
@@ -1276,7 +1378,7 @@ static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
msgHeader = (struct mpi_msg_hdr *)(pMsg - sizeof(struct mpi_msg_hdr));
pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
- circularQ->consumer_idx * 64);
+ circularQ->consumer_idx * pm8001_ha->iomb_size);
if (pOutBoundMsgHeader != msgHeader) {
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("consumer_idx = %d msgHeader = %p\n",
@@ -1292,7 +1394,8 @@ static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
return 0;
}
/* free the circular queue buffer elements associated with the message*/
- circularQ->consumer_idx = (circularQ->consumer_idx + bc) % 256;
+ circularQ->consumer_idx = (circularQ->consumer_idx + bc)
+ % PM8001_MPI_QUEUE;
/* update the CI of outbound queue */
pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
circularQ->consumer_idx);
@@ -1306,13 +1409,14 @@ static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
}
/**
- * mpi_msg_consume- get the MPI message from outbound queue message table.
+ * pm8001_mpi_msg_consume- get the MPI message from outbound queue
+ * message table.
* @pm8001_ha: our hba card information
* @circularQ: the outbound queue table.
* @messagePtr1: the message contents of this outbound message.
* @pBC: the message size.
*/
-static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
struct outbound_queue_table *circularQ,
void **messagePtr1, u8 *pBC)
{
@@ -1321,22 +1425,23 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
u32 header_tmp;
do {
/* If there are not-yet-delivered messages ... */
- if (circularQ->producer_index != circularQ->consumer_idx) {
+ if (le32_to_cpu(circularQ->producer_index)
+ != circularQ->consumer_idx) {
/*Get the pointer to the circular queue buffer element*/
msgHeader = (struct mpi_msg_hdr *)
(circularQ->base_virt +
- circularQ->consumer_idx * 64);
+ circularQ->consumer_idx * pm8001_ha->iomb_size);
/* read header */
header_tmp = pm8001_read_32(msgHeader);
msgHeader_tmp = cpu_to_le32(header_tmp);
- if (0 != (msgHeader_tmp & 0x80000000)) {
+ if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) {
if (OPC_OUB_SKIP_ENTRY !=
- (msgHeader_tmp & 0xfff)) {
+ (le32_to_cpu(msgHeader_tmp) & 0xfff)) {
*messagePtr1 =
((u8 *)msgHeader) +
sizeof(struct mpi_msg_hdr);
- *pBC = (u8)((msgHeader_tmp >> 24) &
- 0x1f);
+ *pBC = (u8)((le32_to_cpu(msgHeader_tmp)
+ >> 24) & 0x1f);
PM8001_IO_DBG(pm8001_ha,
pm8001_printk(": CI=%d PI=%d "
"msgHeader=%x\n",
@@ -1347,8 +1452,9 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
} else {
circularQ->consumer_idx =
(circularQ->consumer_idx +
- ((msgHeader_tmp >> 24) & 0x1f))
- % 256;
+ ((le32_to_cpu(msgHeader_tmp)
+ >> 24) & 0x1f))
+ % PM8001_MPI_QUEUE;
msgHeader_tmp = 0;
pm8001_write_32(msgHeader, 0, 0);
/* update the CI of outbound queue */
@@ -1360,7 +1466,8 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
} else {
circularQ->consumer_idx =
(circularQ->consumer_idx +
- ((msgHeader_tmp >> 24) & 0x1f)) % 256;
+ ((le32_to_cpu(msgHeader_tmp) >> 24) &
+ 0x1f)) % PM8001_MPI_QUEUE;
msgHeader_tmp = 0;
pm8001_write_32(msgHeader, 0, 0);
/* update the CI of outbound queue */
@@ -1376,65 +1483,347 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
producer_index = pm8001_read_32(pi_virt);
circularQ->producer_index = cpu_to_le32(producer_index);
}
- } while (circularQ->producer_index != circularQ->consumer_idx);
+ } while (le32_to_cpu(circularQ->producer_index) !=
+ circularQ->consumer_idx);
/* while we don't have any more not-yet-delivered message */
/* report empty */
return MPI_IO_STATUS_BUSY;
}
-static void pm8001_work_queue(struct work_struct *work)
+void pm8001_work_fn(struct work_struct *work)
{
- struct delayed_work *dw = container_of(work, struct delayed_work, work);
- struct pm8001_wq *wq = container_of(dw, struct pm8001_wq, work_q);
+ struct pm8001_work *pw = container_of(work, struct pm8001_work, work);
struct pm8001_device *pm8001_dev;
- struct domain_device *dev;
+ struct domain_device *dev;
+
+ /*
+ * So far, all users of this stash an associated structure here.
+ * If we get here, and this pointer is null, then the action
+ * was cancelled. This nullification happens when the device
+ * goes away.
+ */
+ pm8001_dev = pw->data; /* Most stash device structure */
+ if ((pm8001_dev == NULL)
+ || ((pw->handler != IO_XFER_ERROR_BREAK)
+ && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
+ kfree(pw);
+ return;
+ }
+
+ switch (pw->handler) {
+ case IO_XFER_ERROR_BREAK:
+ { /* This one stashes the sas_task instead */
+ struct sas_task *t = (struct sas_task *)pm8001_dev;
+ u32 tag;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ unsigned long flags, flags1;
+ struct task_status_struct *ts;
+ int i;
+
+ if (pm8001_query_task(t) == TMF_RESP_FUNC_SUCC)
+ break; /* Task still on lu */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ break; /* Task got completed by another */
+ }
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+ /* Search for a possible ccb that matches the task */
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ tag = ccb->ccb_tag;
+ if ((tag != 0xFFFFFFFF) && (ccb->task == t))
+ break;
+ }
+ if (!ccb) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ break; /* Task got freed by another */
+ }
+ ts = &t->task_status;
+ ts->resp = SAS_TASK_COMPLETE;
+ /* Force the midlayer to retry */
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_dev = ccb->device;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p"
+ " done with event 0x%x resp 0x%x stat 0x%x but"
+ " aborted by upper layer!\n",
+ t, pw->handler, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ t->task_done(t);
+ }
+ } break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ { /* This one stashes the sas_task instead */
+ struct sas_task *t = (struct sas_task *)pm8001_dev;
+ u32 tag;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ unsigned long flags, flags1;
+ int i, ret = 0;
+
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+
+ ret = pm8001_query_task(t);
+
+ PM8001_IO_DBG(pm8001_ha,
+ switch (ret) {
+ case TMF_RESP_FUNC_SUCC:
+ pm8001_printk("...Task on lu\n");
+ break;
+
+ case TMF_RESP_FUNC_COMPLETE:
+ pm8001_printk("...Task NOT on lu\n");
+ break;
- switch (wq->handler) {
+ default:
+ pm8001_printk("...query task failed!!!\n");
+ break;
+ });
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+ (void)pm8001_abort_task(t);
+ break; /* Task got completed by another */
+ }
+
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+ /* Search for a possible ccb that matches the task */
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ tag = ccb->ccb_tag;
+ if ((tag != 0xFFFFFFFF) && (ccb->task == t))
+ break;
+ }
+ if (!ccb) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+ (void)pm8001_abort_task(t);
+ break; /* Task got freed by another */
+ }
+
+ pm8001_dev = ccb->device;
+ dev = pm8001_dev->sas_device;
+
+ switch (ret) {
+ case TMF_RESP_FUNC_SUCC: /* task on lu */
+ ccb->open_retry = 1; /* Snub completion */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ ret = pm8001_abort_task(t);
+ ccb->open_retry = 0;
+ switch (ret) {
+ case TMF_RESP_FUNC_SUCC:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ default: /* device misbehavior */
+ ret = TMF_RESP_FUNC_FAILED;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("...Reset phy\n"));
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ }
+ break;
+
+ case TMF_RESP_FUNC_COMPLETE: /* task not on lu */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ /* Do we need to abort the task locally? */
+ break;
+
+ default: /* device misbehavior */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ ret = TMF_RESP_FUNC_FAILED;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("...Reset phy\n"));
+ pm8001_I_T_nexus_reset(dev);
+ }
+
+ if (ret == TMF_RESP_FUNC_FAILED)
+ t = NULL;
+ pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n"));
+ } break;
case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
- pm8001_dev = wq->data;
dev = pm8001_dev->sas_device;
- pm8001_I_T_nexus_reset(dev);
+ pm8001_I_T_nexus_event_handler(dev);
break;
case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
- pm8001_dev = wq->data;
dev = pm8001_dev->sas_device;
pm8001_I_T_nexus_reset(dev);
break;
case IO_DS_IN_ERROR:
- pm8001_dev = wq->data;
dev = pm8001_dev->sas_device;
pm8001_I_T_nexus_reset(dev);
break;
case IO_DS_NON_OPERATIONAL:
- pm8001_dev = wq->data;
dev = pm8001_dev->sas_device;
pm8001_I_T_nexus_reset(dev);
break;
}
- list_del(&wq->entry);
- kfree(wq);
+ kfree(pw);
}
-static int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
int handler)
{
- struct pm8001_wq *wq;
+ struct pm8001_work *pw;
int ret = 0;
- wq = kmalloc(sizeof(struct pm8001_wq), GFP_ATOMIC);
- if (wq) {
- wq->pm8001_ha = pm8001_ha;
- wq->data = data;
- wq->handler = handler;
- INIT_DELAYED_WORK(&wq->work_q, pm8001_work_queue);
- list_add_tail(&wq->entry, &pm8001_ha->wq_list);
- schedule_delayed_work(&wq->work_q, 0);
+ pw = kmalloc(sizeof(struct pm8001_work), GFP_ATOMIC);
+ if (pw) {
+ pw->pm8001_ha = pm8001_ha;
+ pw->data = data;
+ pw->handler = handler;
+ INIT_WORK(&pw->work, pm8001_work_fn);
+ queue_work(pm8001_wq, &pw->work);
} else
ret = -ENOMEM;
return ret;
}
+static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct task_abort_req task_abort;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_ABORT;
+ int ret;
+
+ if (!pm8001_ha_dev) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+ return;
+ }
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
+ "allocate task\n"));
+ return;
+ }
+
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res)
+ return;
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&task_abort, 0, sizeof(task_abort));
+ task_abort.abort_all = cpu_to_le32(1);
+ task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ task_abort.tag = cpu_to_le32(ccb_tag);
+
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+
+}
+
+static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ struct sata_start_req sata_cmd;
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct host_to_dev_fis fis;
+ struct domain_device *dev;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate task !!!\n"));
+ return;
+ }
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate tag !!!\n"));
+ return;
+ }
+
+ /* allocate domain device by ourselves as libsas
+ * is not going to provide any
+ */
+ dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
+ if (!dev) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Domain device cannot be allocated\n"));
+ sas_free_task(task);
+ return;
+ } else {
+ task->dev = dev;
+ task->dev->lldd_dev = pm8001_ha_dev;
+ }
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+ pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
+ pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
+
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ /* construct read log FIS */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.fis_type = 0x27;
+ fis.flags = 0x80;
+ fis.command = ATA_CMD_READ_LOG_EXT;
+ fis.lbal = 0x10;
+ fis.sector_count = 0x1;
+
+ sata_cmd.tag = cpu_to_le32(ccb_tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+ memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
+
+ res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+
+}
+
/**
* mpi_ssp_completion- process the event that FW response to the SSP request.
* @pm8001_ha: our hba card information
@@ -1463,6 +1852,11 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
status = le32_to_cpu(psspPayload->status);
tag = le32_to_cpu(psspPayload->tag);
ccb = &pm8001_ha->ccb_info[tag];
+ if ((status == IO_ABORTED) && ccb->open_retry) {
+ /* Being completed by another */
+ ccb->open_retry = 0;
+ return;
+ }
pm8001_dev = ccb->device;
param = le32_to_cpu(psspPayload->param);
@@ -1474,10 +1868,17 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW))
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive:"
+ "%016llx", SAS_ADDR(t->dev->sas_addr)));
+
switch (status) {
case IO_SUCCESS:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
- ",param = %d \n", param));
+ ",param = %d\n", param));
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
@@ -1493,14 +1894,14 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
break;
case IO_UNDERFLOW:
/* SSP Completion with error */
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
- ",param = %d \n", param));
+ ",param = %d\n", param));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_DATA_UNDERRUN;
ts->residual = param;
@@ -1518,6 +1919,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
pm8001_printk("IO_XFER_ERROR_BREAK\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
+ /* Force the midlayer to retry */
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
break;
case IO_XFER_ERROR_PHY_NOT_READY:
PM8001_IO_DBG(pm8001_ha,
@@ -1652,6 +2055,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
default:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("Unknown status 0x%x\n", status));
@@ -1661,7 +2065,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
break;
}
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("scsi_status = %x \n ",
+ pm8001_printk("scsi_status = %x\n ",
psspPayload->ssp_resp_iu.status));
spin_lock_irqsave(&t->task_state_lock, flags);
t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
@@ -1721,9 +2125,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
case IO_XFER_ERROR_BREAK:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_BREAK\n"));
- ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAS_INTERRUPTED;
- break;
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+ return;
case IO_XFER_ERROR_PHY_NOT_READY:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
@@ -1802,10 +2205,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
case IO_XFER_OPEN_RETRY_TIMEOUT:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
- ts->resp = SAS_TASK_COMPLETE;
- ts->stat = SAS_OPEN_REJECT;
- ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
- break;
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+ return;
case IO_XFER_ERROR_UNEXPECTED_PHASE:
PM8001_IO_DBG(pm8001_ha,
pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
@@ -1879,37 +2280,122 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct pm8001_ccb_info *ccb;
- unsigned long flags = 0;
u32 param;
u32 status;
u32 tag;
+ int i, j;
+ u8 sata_addr_low[4];
+ u32 temp_sata_addr_low;
+ u8 sata_addr_hi[4];
+ u32 temp_sata_addr_hi;
struct sata_completion_resp *psataPayload;
struct task_status_struct *ts;
struct ata_task_resp *resp ;
u32 *sata_resp;
struct pm8001_device *pm8001_dev;
+ unsigned long flags;
psataPayload = (struct sata_completion_resp *)(piomb + 4);
status = le32_to_cpu(psataPayload->status);
tag = le32_to_cpu(psataPayload->tag);
+ if (!tag) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("tag null\n"));
+ return;
+ }
ccb = &pm8001_ha->ccb_info[tag];
param = le32_to_cpu(psataPayload->param);
- t = ccb->task;
- ts = &t->task_status;
- pm8001_dev = ccb->device;
- if (status)
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("sata IO status 0x%x\n", status));
- if (unlikely(!t || !t->lldd_task || !t->dev))
+ pm8001_printk("ccb null\n"));
return;
+ }
+ if (t) {
+ if (t->dev && (t->dev->lldd_dev))
+ pm8001_dev = t->dev->lldd_dev;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task null\n"));
+ return;
+ }
+
+ if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
+ && unlikely(!t || !t->lldd_task || !t->dev)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task or dev null\n"));
+ return;
+ }
+
+ ts = &t->task_status;
+ if (!ts) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("ts null\n"));
+ return;
+ }
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW)) {
+ if (!((t->dev->parent) &&
+ (DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
+ for (i = 0 , j = 4; j <= 7 && i <= 3; i++ , j++)
+ sata_addr_low[i] = pm8001_ha->sas_addr[j];
+ for (i = 0 , j = 0; j <= 3 && i <= 3; i++ , j++)
+ sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+ memcpy(&temp_sata_addr_low, sata_addr_low,
+ sizeof(sata_addr_low));
+ memcpy(&temp_sata_addr_hi, sata_addr_hi,
+ sizeof(sata_addr_hi));
+ temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+ |((temp_sata_addr_hi << 8) &
+ 0xff0000) |
+ ((temp_sata_addr_hi >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_hi << 24) &
+ 0xff000000));
+ temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+ & 0xff) |
+ ((temp_sata_addr_low << 8)
+ & 0xff0000) |
+ ((temp_sata_addr_low >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_low << 24)
+ & 0xff000000)) +
+ pm8001_dev->attached_phy +
+ 0x10);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive:"
+ "%08x%08x", temp_sata_addr_hi,
+ temp_sata_addr_low));
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive:"
+ "%016llx", SAS_ADDR(t->dev->sas_addr)));
+ }
+ }
switch (status) {
case IO_SUCCESS:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
if (param == 0) {
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
+ /* check if response is for SEND READ LOG */
+ if (pm8001_dev &&
+ (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
+ /* set new bit for abort_all */
+ pm8001_dev->id |= NCQ_ABORT_ALL_FLAG;
+ /* clear bit for read log */
+ pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF;
+ pm8001_send_abort_all(pm8001_ha, pm8001_dev);
+ /* Free the tag */
+ pm8001_tag_free(pm8001_ha, tag);
+ sas_free_task(t);
+ return;
+ }
} else {
u8 len;
ts->resp = SAS_TASK_COMPLETE;
@@ -1940,14 +2426,14 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
ts->buf_valid_size = sizeof(*resp);
} else
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("response to large \n"));
+ pm8001_printk("response to large\n"));
}
if (pm8001_dev)
pm8001_dev->running_req--;
break;
case IO_ABORTED:
PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_ABORTED_TASK;
if (pm8001_dev)
@@ -2016,11 +2502,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*in order to force CPU ordering*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2036,11 +2518,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2064,11 +2542,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/* ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2131,11 +2605,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
IO_DS_NON_OPERATIONAL);
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2155,11 +2625,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
IO_DS_IN_ERROR);
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2188,20 +2654,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, status, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- } else if (t->uldd_task) {
- spin_unlock_irqrestore(&t->task_state_lock, flags);
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/* ditto */
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
- } else if (!t->uldd_task) {
+ } else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
}
}
@@ -2209,7 +2664,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
{
struct sas_task *t;
- unsigned long flags = 0;
struct task_status_struct *ts;
struct pm8001_ccb_info *ccb;
struct pm8001_device *pm8001_dev;
@@ -2219,6 +2673,30 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
u32 tag = le32_to_cpu(psataPayload->tag);
u32 port_id = le32_to_cpu(psataPayload->port_id);
u32 dev_id = le32_to_cpu(psataPayload->device_id);
+ unsigned long flags;
+
+ ccb = &pm8001_ha->ccb_info[tag];
+
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("No CCB !!!. returning\n"));
+ }
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SATA EVENT 0x%x\n", event));
+
+ /* Check if this is NCQ error */
+ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+ /* find device using device id */
+ pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+ /* send read log extension */
+ if (pm8001_dev)
+ pm8001_send_read_log(pm8001_ha, pm8001_dev);
+ return;
+ }
ccb = &pm8001_ha->ccb_info[tag];
t = ccb->task;
@@ -2229,9 +2707,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
if (unlikely(!t || !t->lldd_task || !t->dev))
return;
ts = &t->task_status;
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("port_id = %x,device_id = %x\n",
- port_id, dev_id));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, dev_id, tag, event));
switch (event) {
case IO_OVERFLOW:
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
@@ -2287,11 +2765,7 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAS_QUEUE_FULL;
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
return;
}
break;
@@ -2400,20 +2874,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
" resp 0x%x stat 0x%x but aborted by upper layer!\n",
t, event, ts->resp, ts->stat));
pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- } else if (t->uldd_task) {
- spin_unlock_irqrestore(&t->task_state_lock, flags);
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/* ditto */
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
- } else if (!t->uldd_task) {
+ } else {
spin_unlock_irqrestore(&t->task_state_lock, flags);
- pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
- mb();/*ditto*/
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- t->task_done(t);
- spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
}
}
@@ -2619,8 +3082,8 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
}
-static void
-mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
{
struct set_dev_state_resp *pPayload =
(struct set_dev_state_resp *)(piomb + 4);
@@ -2629,8 +3092,8 @@ mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
struct pm8001_device *pm8001_dev = ccb->device;
u32 status = le32_to_cpu(pPayload->status);
u32 device_id = le32_to_cpu(pPayload->device_id);
- u8 pds = le32_to_cpu(pPayload->pds_nds) | PDS_BITS;
- u8 nds = le32_to_cpu(pPayload->pds_nds) | NDS_BITS;
+ u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS;
+ u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS;
PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
"from 0x%x to 0x%x status = 0x%x!\n",
device_id, pds, nds, status));
@@ -2640,8 +3103,7 @@ mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_ccb_free(pm8001_ha, tag);
}
-static void
-mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct get_nvm_data_resp *pPayload =
(struct get_nvm_data_resp *)(piomb + 4);
@@ -2660,8 +3122,8 @@ mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_ccb_free(pm8001_ha, tag);
}
-static void
-mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+void
+pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct fw_control_ex *fw_control_context;
struct get_nvm_data_resp *pPayload =
@@ -2722,7 +3184,7 @@ mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_ccb_free(pm8001_ha, tag);
}
-static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct local_phy_ctl_resp *pPayload =
(struct local_phy_ctl_resp *)(piomb + 4);
@@ -2731,11 +3193,11 @@ static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
if (status != 0) {
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op failed! \n",
+ pm8001_printk("%x phy execute %x phy op failed!\n",
phy_id, phy_op));
} else
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("%x phy execute %x phy op success! \n",
+ pm8001_printk("%x phy execute %x phy op success!\n",
phy_id, phy_op));
return 0;
}
@@ -2751,7 +3213,7 @@ static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
* while receive a broadcast(change) primitive just tell the sas
* layer to discover the changed domain rather than the whole domain.
*/
-static void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
{
struct pm8001_phy *phy = &pm8001_ha->phy[i];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
@@ -2785,7 +3247,7 @@ static void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
}
/* Get the link rate speed */
-static void get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
{
struct sas_phy *sas_phy = phy->sas_phy.phy;
@@ -2822,7 +3284,7 @@ static void get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
* LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
* buffer.
*/
-static void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
u8 *sas_addr)
{
if (phy->sas_phy.frame_rcvd[0] == 0x34
@@ -2859,12 +3321,12 @@ static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
memset((u8 *)&payload, 0, sizeof(payload));
circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
- payload.tag = 1;
+ payload.tag = cpu_to_le32(1);
payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
((phyId & 0x0F) << 4) | (port_id & 0x0F));
payload.param0 = cpu_to_le32(param0);
payload.param1 = cpu_to_le32(param1);
- mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
}
static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
@@ -2895,6 +3357,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
unsigned long flags;
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
port_id, phy_id));
@@ -2909,19 +3372,19 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
PHY_NOTIFY_ENABLE_SPINUP);
port->port_attached = 1;
- get_lrate_mode(phy, link_rate);
+ pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_EDGE_EXPANDER_DEVICE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("expander device.\n"));
port->port_attached = 1;
- get_lrate_mode(phy, link_rate);
+ pm8001_get_lrate_mode(phy, link_rate);
break;
case SAS_FANOUT_EXPANDER_DEVICE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("fanout expander device.\n"));
port->port_attached = 1;
- get_lrate_mode(phy, link_rate);
+ pm8001_get_lrate_mode(phy, link_rate);
break;
default:
PM8001_MSG_DBG(pm8001_ha,
@@ -2931,9 +3394,9 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
phy->phy_type |= PORT_TYPE_SAS;
phy->identify.device_type = deviceType;
phy->phy_attached = 1;
- if (phy->identify.device_type == SAS_END_DEV)
+ if (phy->identify.device_type == SAS_END_DEVICE)
phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
- else if (phy->identify.device_type != NO_DEVICE)
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
phy->sas_phy.oob_mode = SAS_OOB_MODE;
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
@@ -2975,8 +3438,9 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
" phy id = %d\n", port_id, phy_id));
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
port->port_attached = 1;
- get_lrate_mode(phy, link_rate);
+ pm8001_get_lrate_mode(phy, link_rate);
phy->phy_type |= PORT_TYPE_SATA;
phy->phy_attached = 1;
phy->sas_phy.oob_mode = SATA_OOB_MODE;
@@ -2986,7 +3450,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
sizeof(struct dev_to_host_fis));
phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
- phy->identify.device_type = SATA_DEV;
+ phy->identify.device_type = SAS_SATA_DEV;
pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -3021,7 +3485,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
case PORT_INVALID:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" PortInvalid portID %d \n", port_id));
+ pm8001_printk(" PortInvalid portID %d\n", port_id));
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk(" Last phy Down and port invalid\n"));
port->port_attached = 0;
@@ -3030,7 +3494,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
case PORT_IN_RESET:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk(" Port In Reset portID %d \n", port_id));
+ pm8001_printk(" Port In Reset portID %d\n", port_id));
break;
case PORT_NOT_ESTABLISHED:
PM8001_MSG_DBG(pm8001_ha,
@@ -3057,7 +3521,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * mpi_reg_resp -process register device ID response.
+ * pm8001_mpi_reg_resp -process register device ID response.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*
@@ -3066,7 +3530,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
* has assigned, from now,inter-communication with FW is no longer using the
* SAS address, use device ID which FW assigned.
*/
-static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
u32 status;
u32 device_id;
@@ -3077,7 +3541,7 @@ static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
(struct dev_reg_resp *)(piomb + 4);
htag = le32_to_cpu(registerRespPayload->tag);
- ccb = &pm8001_ha->ccb_info[registerRespPayload->tag];
+ ccb = &pm8001_ha->ccb_info[htag];
pm8001_dev = ccb->device;
status = le32_to_cpu(registerRespPayload->status);
device_id = le32_to_cpu(registerRespPayload->device_id);
@@ -3128,7 +3592,7 @@ static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
return 0;
}
-static int mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
u32 status;
u32 device_id;
@@ -3144,8 +3608,13 @@ static int mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
return 0;
}
-static int
-mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+/**
+ * fw_flash_update_resp - Response from FW for flash update command.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
{
u32 status;
struct fw_control_ex fw_control_context;
@@ -3200,10 +3669,6 @@ mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
break;
}
ccb->fw_control_context->fw_control->retcode = status;
- pci_free_consistent(pm8001_ha->pdev,
- fw_control_context.len,
- fw_control_context.virtAddr,
- fw_control_context.phys_addr);
complete(pm8001_ha->nvmd_completion);
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
@@ -3211,8 +3676,7 @@ mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
return 0;
}
-static int
-mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
{
u32 status;
int i;
@@ -3223,13 +3687,12 @@ mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
pm8001_printk(" status = 0x%x\n", status));
for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("inb_IOMB_payload[0x%x] 0x%x, \n", i,
+ pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i,
pPayload->inb_IOMB_payload[i]));
return 0;
}
-static int
-mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct pm8001_ccb_info *ccb;
@@ -3237,20 +3700,29 @@ mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
u32 status ;
u32 tag, scp;
struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
struct task_abort_resp *pPayload =
(struct task_abort_resp *)(piomb + 4);
- ccb = &pm8001_ha->ccb_info[pPayload->tag];
- t = ccb->task;
-
status = le32_to_cpu(pPayload->status);
tag = le32_to_cpu(pPayload->tag);
+ if (!tag) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk(" TAG NULL. RETURNING !!!"));
+ return -1;
+ }
+
scp = le32_to_cpu(pPayload->scp);
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(" status = 0x%x\n", status));
- if (t == NULL)
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device; /* retrieve device */
+
+ if (!t) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk(" TASK NULL. RETURNING !!!"));
return -1;
+ }
ts = &t->task_status;
if (status != 0)
PM8001_FAIL_DBG(pm8001_ha,
@@ -3272,9 +3744,17 @@ mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
t->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&t->task_state_lock, flags);
- pm8001_ccb_task_free(pm8001_ha, t, ccb, pPayload->tag);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
mb();
- t->task_done(t);
+
+ if (pm8001_dev->id & NCQ_ABORT_ALL_FLAG) {
+ pm8001_tag_free(pm8001_ha, tag);
+ sas_free_task(t);
+ /* clear the flag */
+ pm8001_dev->id &= 0xBFFFFFFF;
+ } else
+ t->task_done(t);
+
return 0;
}
@@ -3315,12 +3795,12 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
break;
case HW_EVENT_SAS_PHY_UP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_START_STATUS \n"));
+ pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
hw_event_sas_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_SATA_PHY_UP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_PHY_UP \n"));
+ pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
hw_event_sata_phy_up(pm8001_ha, piomb);
break;
case HW_EVENT_PHY_STOP_STATUS:
@@ -3332,12 +3812,12 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
break;
case HW_EVENT_SATA_SPINUP_HOLD:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD \n"));
+ pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
break;
case HW_EVENT_PHY_DOWN:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PHY_DOWN \n"));
+ pm8001_printk("HW_EVENT_PHY_DOWN\n"));
sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
phy->phy_attached = 0;
phy->phy_state = 0;
@@ -3449,7 +3929,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
break;
case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED \n"));
+ pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
pm8001_hw_event_ack_req(pm8001_ha, 0,
HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
port_id, phy_id, 0, 0);
@@ -3459,25 +3939,25 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
break;
case HW_EVENT_PORT_RESET_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO \n"));
+ pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO \n"));
+ pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
sas_phy_disconnected(sas_phy);
phy->phy_attached = 0;
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
break;
case HW_EVENT_PORT_RECOVER:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RECOVER \n"));
+ pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
break;
case HW_EVENT_PORT_RESET_COMPLETE:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE \n"));
+ pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
break;
case EVENT_BROADCAST_ASYNCH_EVENT:
PM8001_MSG_DBG(pm8001_ha,
@@ -3498,57 +3978,57 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
*/
static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
- u32 pHeader = (u32)*(u32 *)piomb;
+ __le32 pHeader = *(__le32 *)piomb;
u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
switch (opc) {
case OPC_OUB_ECHO:
- PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO \n"));
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
break;
case OPC_OUB_HW_EVENT:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_HW_EVENT \n"));
+ pm8001_printk("OPC_OUB_HW_EVENT\n"));
mpi_hw_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SSP_COMP \n"));
+ pm8001_printk("OPC_OUB_SSP_COMP\n"));
mpi_ssp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SMP_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SMP_COMP \n"));
+ pm8001_printk("OPC_OUB_SMP_COMP\n"));
mpi_smp_completion(pm8001_ha, piomb);
break;
case OPC_OUB_LOCAL_PHY_CNTRL:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
- mpi_local_phy_ctl(pm8001_ha, piomb);
+ pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
break;
case OPC_OUB_DEV_REGIST:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_DEV_REGIST \n"));
- mpi_reg_resp(pm8001_ha, piomb);
+ pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+ pm8001_mpi_reg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEREG_DEV:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("unresgister the deviece \n"));
- mpi_dereg_resp(pm8001_ha, piomb);
+ pm8001_printk("unregister the device\n"));
+ pm8001_mpi_dereg_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEV_HANDLE:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_GET_DEV_HANDLE \n"));
+ pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
break;
case OPC_OUB_SATA_COMP:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_COMP \n"));
+ pm8001_printk("OPC_OUB_SATA_COMP\n"));
mpi_sata_completion(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_EVENT:
PM8001_MSG_DBG(pm8001_ha,
- pm8001_printk("OPC_OUB_SATA_EVENT \n"));
+ pm8001_printk("OPC_OUB_SATA_EVENT\n"));
mpi_sata_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_EVENT:
@@ -3573,7 +4053,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_FW_FLASH_UPDATE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
- mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GPIO_RESPONSE:
PM8001_MSG_DBG(pm8001_ha,
@@ -3586,17 +4066,17 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_GENERAL_EVENT:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
- mpi_general_event(pm8001_ha, piomb);
+ pm8001_mpi_general_event(pm8001_ha, piomb);
break;
case OPC_OUB_SSP_ABORT_RSP:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
- mpi_task_abort_resp(pm8001_ha, piomb);
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SATA_ABORT_RSP:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
- mpi_task_abort_resp(pm8001_ha, piomb);
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SAS_DIAG_MODE_START_END:
PM8001_MSG_DBG(pm8001_ha,
@@ -3621,17 +4101,17 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_SMP_ABORT_RSP:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
- mpi_task_abort_resp(pm8001_ha, piomb);
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_NVMD_DATA:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
- mpi_get_nvmd_resp(pm8001_ha, piomb);
+ pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_SET_NVMD_DATA:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
- mpi_set_nvmd_resp(pm8001_ha, piomb);
+ pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
break;
case OPC_OUB_DEVICE_HANDLE_REMOVAL:
PM8001_MSG_DBG(pm8001_ha,
@@ -3640,7 +4120,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_SET_DEVICE_STATE:
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
- mpi_set_dev_state_resp(pm8001_ha, piomb);
+ pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
break;
case OPC_OUB_GET_DEVICE_STATE:
PM8001_MSG_DBG(pm8001_ha,
@@ -3662,33 +4142,36 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
}
-static int process_oq(struct pm8001_hba_info *pm8001_ha)
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
struct outbound_queue_table *circularQ;
void *pMsg1 = NULL;
- u8 bc = 0;
+ u8 uninitialized_var(bc);
u32 ret = MPI_IO_STATUS_FAIL;
+ unsigned long flags;
- circularQ = &pm8001_ha->outbnd_q_tbl[0];
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ circularQ = &pm8001_ha->outbnd_q_tbl[vec];
do {
- ret = mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
if (MPI_IO_STATUS_SUCCESS == ret) {
/* process the outbound message */
process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
/* free the message from the outbound circular buffer */
- mpi_msg_free_set(pm8001_ha, pMsg1, circularQ, bc);
+ pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+ circularQ, bc);
}
if (MPI_IO_STATUS_BUSY == ret) {
- u32 producer_idx;
/* Update the producer index from SPC */
- producer_idx = pm8001_read_32(circularQ->pi_virt);
- circularQ->producer_index = cpu_to_le32(producer_idx);
- if (circularQ->producer_index ==
+ circularQ->producer_index =
+ cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+ if (le32_to_cpu(circularQ->producer_index) ==
circularQ->consumer_idx)
/* OQ is empty */
break;
}
} while (1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
return ret;
}
@@ -3699,7 +4182,7 @@ static const u8 data_dir_flags[] = {
[PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */
[PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */
};
-static void
+void
pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
{
int i;
@@ -3714,9 +4197,9 @@ pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
}
}
-static void build_smp_cmd(u32 deviceID, u32 hTag, struct smp_req *psmp_cmd)
+static void build_smp_cmd(u32 deviceID, __le32 hTag, struct smp_req *psmp_cmd)
{
- psmp_cmd->tag = cpu_to_le32(hTag);
+ psmp_cmd->tag = hTag;
psmp_cmd->device_id = cpu_to_le32(deviceID);
psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
}
@@ -3774,7 +4257,7 @@ static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
smp_cmd.long_smp_req.long_resp_size =
cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
- mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd, 0);
return 0;
err_out_2:
@@ -3800,7 +4283,7 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
struct ssp_ini_io_start_req ssp_cmd;
u32 tag = ccb->ccb_tag;
int ret;
- __le64 phys_addr;
+ u64 phys_addr;
struct inbound_queue_table *circularQ;
u32 opc = OPC_INB_SSPINIIOSTART;
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
@@ -3815,21 +4298,22 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
- memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
circularQ = &pm8001_ha->inbnd_q_tbl[0];
/* fill in PRD (scatter/gather) table, if any */
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
- phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]));
- ssp_cmd.addr_low = lower_32_bits(phys_addr);
- ssp_cmd.addr_high = upper_32_bits(phys_addr);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(phys_addr));
ssp_cmd.esgl = cpu_to_le32(1<<31);
} else if (task->num_scatter == 1) {
- __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
- ssp_cmd.addr_low = lower_32_bits(dma_addr);
- ssp_cmd.addr_high = upper_32_bits(dma_addr);
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(dma_addr));
ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.esgl = 0;
} else if (task->num_scatter == 0) {
@@ -3838,7 +4322,7 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.esgl = 0;
}
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, 0);
return ret;
}
@@ -3852,32 +4336,35 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
int ret;
struct sata_start_req sata_cmd;
u32 hdr_tag, ncg_tag = 0;
- __le64 phys_addr;
+ u64 phys_addr;
u32 ATAP = 0x0;
u32 dir;
struct inbound_queue_table *circularQ;
+ unsigned long flags;
u32 opc = OPC_INB_SATA_HOST_OPSTART;
memset(&sata_cmd, 0, sizeof(sata_cmd));
circularQ = &pm8001_ha->inbnd_q_tbl[0];
if (task->data_dir == PCI_DMA_NONE) {
ATAP = 0x04; /* no data*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
} else if (likely(!task->ata_task.device_control_reg_update)) {
if (task->ata_task.dma_xfer) {
ATAP = 0x06; /* DMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
} else {
ATAP = 0x05; /* PIO*/
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
}
if (task->ata_task.use_ncq &&
dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
ATAP = 0x07; /* FPDMA */
- PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA \n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
}
}
- if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
ncg_tag = hdr_tag;
+ }
dir = data_dir_flags[task->data_dir] << 8;
sata_cmd.tag = cpu_to_le32(tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
@@ -3891,13 +4378,13 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
/* fill in PRD (scatter/gather) table, if any */
if (task->num_scatter > 1) {
pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
- phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
- offsetof(struct pm8001_ccb_info, buf_prd[0]));
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
sata_cmd.esgl = cpu_to_le32(1 << 31);
} else if (task->num_scatter == 1) {
- __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
+ u64 dma_addr = sg_dma_address(task->scatter);
sata_cmd.addr_low = lower_32_bits(dma_addr);
sata_cmd.addr_high = upper_32_bits(dma_addr);
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
@@ -3908,7 +4395,43 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
}
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd);
+
+ /* Check for read log for failed drive and return */
+ if (sata_cmd.sata_fis.command == 0x2f) {
+ if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
+ struct task_status_struct *ts;
+
+ pm8001_ha_dev->id &= 0xDFFFFFFF;
+ ts = &task->task_status;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags &
+ SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p resp 0x%x "
+ " stat 0x%x but aborted by upper layer "
+ "\n", task, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ pm8001_ccb_task_free_done(pm8001_ha, task,
+ ccb, tag);
+ return 0;
+ }
+ }
+ }
+
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
return ret;
}
@@ -3938,12 +4461,12 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
LINKMODE_AUTO | LINKRATE_15 |
LINKRATE_30 | LINKRATE_60 | phy_id);
- payload.sas_identify.dev_type = SAS_END_DEV;
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
memcpy(payload.sas_identify.sas_addr,
pm8001_ha->sas_addr, SAS_ADDR_SIZE);
payload.sas_identify.phy_id = phy_id;
- ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
return ret;
}
@@ -3953,7 +4476,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
* @num: the inbound queue number
* @phy_id: the phy id which we wanted to start up.
*/
-static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
u8 phy_id)
{
struct phy_stop_req payload;
@@ -3965,12 +4488,12 @@ static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
memset(&payload, 0, sizeof(payload));
payload.tag = cpu_to_le32(tag);
payload.phy_id = cpu_to_le32(phy_id);
- ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
return ret;
}
/**
- * see comments on mpi_reg_resp.
+ * see comments on pm8001_mpi_reg_resp.
*/
static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
struct pm8001_device *pm8001_dev, u32 flag)
@@ -4000,11 +4523,11 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
if (flag == 1)
stp_sspsmp_sata = 0x02; /*direct attached sata */
else {
- if (pm8001_dev->dev_type == SATA_DEV)
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
stp_sspsmp_sata = 0x00; /* stp*/
- else if (pm8001_dev->dev_type == SAS_END_DEV ||
- pm8001_dev->dev_type == EDGE_DEV ||
- pm8001_dev->dev_type == FANOUT_DEV)
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
stp_sspsmp_sata = 0x01; /*ssp or smp*/
}
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
@@ -4024,14 +4547,14 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
SAS_ADDR_SIZE);
- rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return rc;
}
/**
- * see comments on mpi_reg_resp.
+ * see comments on pm8001_mpi_reg_resp.
*/
-static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
u32 device_id)
{
struct dereg_dev_req payload;
@@ -4041,11 +4564,11 @@ static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
circularQ = &pm8001_ha->inbnd_q_tbl[0];
memset(&payload, 0, sizeof(payload));
- payload.tag = 1;
+ payload.tag = cpu_to_le32(1);
payload.device_id = cpu_to_le32(device_id);
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("unregister device device_id = %d\n", device_id));
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return ret;
}
@@ -4065,10 +4588,10 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
memset(&payload, 0, sizeof(payload));
circularQ = &pm8001_ha->inbnd_q_tbl[0];
- payload.tag = 1;
+ payload.tag = cpu_to_le32(1);
payload.phyop_phyid =
cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return ret;
}
@@ -4092,14 +4615,11 @@ static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
* @stat: stat.
*/
static irqreturn_t
-pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha)
+pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
- unsigned long flags;
- spin_lock_irqsave(&pm8001_ha->lock, flags);
- pm8001_chip_interrupt_disable(pm8001_ha);
- process_oq(pm8001_ha);
- pm8001_chip_interrupt_enable(pm8001_ha);
- spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_chip_interrupt_disable(pm8001_ha, vec);
+ process_oq(pm8001_ha, vec);
+ pm8001_chip_interrupt_enable(pm8001_ha, vec);
return IRQ_HANDLED;
}
@@ -4121,7 +4641,7 @@ static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
task_abort.device_id = cpu_to_le32(dev_id);
task_abort.tag = cpu_to_le32(cmd_tag);
}
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
return ret;
}
@@ -4130,16 +4650,17 @@ static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
* @task: the task we wanted to aborted.
* @flag: the abort flag.
*/
-static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag)
{
u32 opc, device_id;
int rc = TMF_RESP_FUNC_FAILED;
- PM8001_EH_DBG(pm8001_ha, pm8001_printk("cmd_tag = %x, abort task tag"
- " = %x", cmd_tag, task_tag));
- if (pm8001_dev->dev_type == SAS_END_DEV)
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
+ cmd_tag, task_tag));
+ if (pm8001_dev->dev_type == SAS_END_DEVICE)
opc = OPC_INB_SSP_ABORT;
- else if (pm8001_dev->dev_type == SATA_DEV)
+ else if (pm8001_dev->dev_type == SAS_SATA_DEV)
opc = OPC_INB_SATA_ABORT;
else
opc = OPC_INB_SMP_ABORT;/* SMP */
@@ -4157,7 +4678,7 @@ static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
* @ccb: the ccb information.
* @tmf: task management function.
*/
-static int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
{
struct sas_task *task = ccb->task;
@@ -4174,12 +4695,14 @@ static int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
+ if (pm8001_ha->chip_id != chip_8001)
+ sspTMCmd.ds_ads_m = 0x08;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd, 0);
return ret;
}
-static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
void *payload)
{
u32 opc = OPC_INB_GET_NVMD_DATA;
@@ -4196,7 +4719,7 @@ static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
if (!fw_control_context)
return -ENOMEM;
- fw_control_context->usrAddr = (u8 *)&ioctl_payload->func_specific[0];
+ fw_control_context->usrAddr = (u8 *)ioctl_payload->func_specific;
fw_control_context->len = ioctl_payload->length;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
memset(&nvmd_req, 0, sizeof(nvmd_req));
@@ -4252,14 +4775,24 @@ static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
break;
}
+ case IOP_RDUMP: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | IOP_RDUMP);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.vpd_offset = cpu_to_le32(ioctl_payload->offset);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
default:
break;
}
- rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req, 0);
return rc;
}
-static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
void *payload)
{
u32 opc = OPC_INB_SET_NVMD_DATA;
@@ -4278,7 +4811,7 @@ static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
return -ENOMEM;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
- ioctl_payload->func_specific,
+ &ioctl_payload->func_specific,
ioctl_payload->length);
memset(&nvmd_req, 0, sizeof(nvmd_req));
rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -4335,7 +4868,7 @@ static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
default:
break;
}
- rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req, 0);
return rc;
}
@@ -4344,7 +4877,7 @@ static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
* @pm8001_ha: our hba card information.
* @fw_flash_updata_info: firmware flash update param
*/
-static int
+int
pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
void *fw_flash_updata_info, u32 tag)
{
@@ -4362,13 +4895,15 @@ pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
payload.total_image_len = cpu_to_le32(info->total_image_len);
payload.len = info->sgl.im_len.len ;
- payload.sgl_addr_lo = lower_32_bits(info->sgl.addr);
- payload.sgl_addr_hi = upper_32_bits(info->sgl.addr);
- ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ payload.sgl_addr_lo =
+ cpu_to_le32(lower_32_bits(le64_to_cpu(info->sgl.addr)));
+ payload.sgl_addr_hi =
+ cpu_to_le32(upper_32_bits(le64_to_cpu(info->sgl.addr)));
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return ret;
}
-static int
+int
pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
void *payload)
{
@@ -4378,29 +4913,14 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
int rc;
u32 tag;
struct pm8001_ccb_info *ccb;
- void *buffer = NULL;
- dma_addr_t phys_addr;
- u32 phys_addr_hi;
- u32 phys_addr_lo;
+ void *buffer = pm8001_ha->memoryMap.region[FW_FLASH].virt_ptr;
+ dma_addr_t phys_addr = pm8001_ha->memoryMap.region[FW_FLASH].phys_addr;
struct pm8001_ioctl_payload *ioctl_payload = payload;
fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
if (!fw_control_context)
return -ENOMEM;
- fw_control = (struct fw_control_info *)&ioctl_payload->func_specific[0];
- if (fw_control->len != 0) {
- if (pm8001_mem_alloc(pm8001_ha->pdev,
- (void **)&buffer,
- &phys_addr,
- &phys_addr_hi,
- &phys_addr_lo,
- fw_control->len, 0) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("Mem alloc failure\n"));
- kfree(fw_control_context);
- return -ENOMEM;
- }
- }
+ fw_control = (struct fw_control_info *)&ioctl_payload->func_specific;
memcpy(buffer, fw_control->buffer, fw_control->len);
flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
@@ -4410,6 +4930,7 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
flash_update_info.total_image_len = fw_control->size;
fw_control_context->fw_control = fw_control;
fw_control_context->virtAddr = buffer;
+ fw_control_context->phys_addr = phys_addr;
fw_control_context->len = fw_control->len;
rc = pm8001_tag_alloc(pm8001_ha, &tag);
if (rc) {
@@ -4424,7 +4945,85 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
return rc;
}
-static int
+ssize_t
+pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
+{
+ u32 value, rem, offset = 0, bar = 0;
+ u32 index, work_offset, dw_length;
+ u32 shift_value, gsm_base, gsm_dump_offset;
+ char *direct_data;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ direct_data = buf;
+ gsm_dump_offset = pm8001_ha->fatal_forensic_shift_offset;
+
+ /* check max is 1 Mbytes */
+ if ((length > 0x100000) || (gsm_dump_offset & 3) ||
+ ((gsm_dump_offset + length) > 0x1000000))
+ return -EINVAL;
+
+ if (pm8001_ha->chip_id == chip_8001)
+ bar = 2;
+ else
+ bar = 1;
+
+ work_offset = gsm_dump_offset & 0xFFFF0000;
+ offset = gsm_dump_offset & 0x0000FFFF;
+ gsm_dump_offset = work_offset;
+ /* adjust length to dword boundary */
+ rem = length & 3;
+ dw_length = length >> 2;
+
+ for (index = 0; index < dw_length; index++) {
+ if ((work_offset + offset) & 0xFFFF0000) {
+ if (pm8001_ha->chip_id == chip_8001)
+ shift_value = ((gsm_dump_offset + offset) &
+ SHIFT_REG_64K_MASK);
+ else
+ shift_value = (((gsm_dump_offset + offset) &
+ SHIFT_REG_64K_MASK) >>
+ SHIFT_REG_BIT_SHIFT);
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ gsm_base = GSM_BASE;
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ (gsm_base + shift_value)))
+ return -EIO;
+ } else {
+ gsm_base = 0;
+ if (-1 == pm80xx_bar4_shift(pm8001_ha,
+ (gsm_base + shift_value)))
+ return -EIO;
+ }
+ gsm_dump_offset = (gsm_dump_offset + offset) &
+ 0xFFFF0000;
+ work_offset = 0;
+ offset = offset & 0x0000FFFF;
+ }
+ value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+ 0x0000FFFF);
+ direct_data += sprintf(direct_data, "%08x ", value);
+ offset += 4;
+ }
+ if (rem != 0) {
+ value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+ 0x0000FFFF);
+ /* xfr for non_dw */
+ direct_data += sprintf(direct_data, "%08x ", value);
+ }
+ /* Shift back to BAR4 original address */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, 0))
+ return -EIO;
+ pm8001_ha->fatal_forensic_shift_offset += 1024;
+
+ if (pm8001_ha->fatal_forensic_shift_offset >= 0x100000)
+ pm8001_ha->fatal_forensic_shift_offset = 0;
+ return direct_data - buf;
+}
+
+int
pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
struct pm8001_device *pm8001_dev, u32 state)
{
@@ -4445,7 +5044,7 @@ pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
payload.tag = cpu_to_le32(tag);
payload.device_id = cpu_to_le32(pm8001_dev->device_id);
payload.nds = cpu_to_le32(state);
- rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return rc;
}
@@ -4470,7 +5069,7 @@ pm8001_chip_sas_re_initialization(struct pm8001_hba_info *pm8001_ha)
payload.SSAHOLT = cpu_to_le32(0xd << 25);
payload.sata_hol_tmo = cpu_to_le32(80);
payload.open_reject_cmdretries_data_retries = cpu_to_le32(0xff00ff);
- rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
return rc;
}
@@ -4503,4 +5102,3 @@ const struct pm8001_dispatch pm8001_8001_dispatch = {
.set_dev_state_req = pm8001_chip_set_dev_state_req,
.sas_re_init_req = pm8001_chip_sas_re_initialization,
};
-
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 833a5201eda..e4867e690c8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -131,6 +131,12 @@
#define LINKRATE_30 (0x02 << 8)
#define LINKRATE_60 (0x04 << 8)
+/* for phy state */
+
+#define PHY_STATE_LINK_UP_SPC 0x1
+
+/* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
+#define GSM_SM_BASE 0x4F0000
struct mpi_msg_hdr{
__le32 header; /* Bits [11:0] - Message operation code */
/* Bits [15:12] - Message Category */
@@ -209,7 +215,7 @@ struct pio_setup_fis {
/*
* brief the data structure of SATA Completion Response
- * use to discribe the sata task response (64 bytes)
+ * use to describe the sata task response (64 bytes)
*/
struct sata_completion_resp {
__le32 tag;
@@ -298,7 +304,7 @@ struct local_phy_ctl_resp {
#define OP_BITS 0x0000FF00
-#define ID_BITS 0x0000000F
+#define ID_BITS 0x000000FF
/*
* brief the data structure of PORT Control Command
@@ -599,7 +605,7 @@ struct fw_flash_Update_req {
*
*/
struct fw_flash_Update_resp {
- dma_addr_t tag;
+ __le32 tag;
__le32 status;
u32 reserved[13];
} __attribute__((packed, aligned(4)));
@@ -625,7 +631,7 @@ struct set_nvm_data_req {
__le32 tag;
__le32 len_ir_vpdd;
__le32 vpd_offset;
- u32 reserved[8];
+ __le32 reserved[8];
__le32 resp_addr_lo;
__le32 resp_addr_hi;
__le32 resp_len;
@@ -951,7 +957,7 @@ struct set_dev_state_resp {
#define PCIE_EVENT_INTERRUPT 0x003044
#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
#define PCIE_ERROR_INTERRUPT 0x00304C
-/* signature defintion for host scratch pad0 register */
+/* signature definition for host scratch pad0 register */
#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
/* Signature for Soft Reset */
@@ -1025,5 +1031,8 @@ struct set_dev_state_resp {
#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
+#define GSM_BASE 0x4F0000
+#define SHIFT_REG_64K_MASK 0xffff0000
+#define SHIFT_REG_BIT_SHIFT 8
#endif
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f8c86b28f03..e90c89f1d48 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1,5 +1,5 @@
/*
- * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
*
* Copyright (c) 2008-2009 USI Co., Ltd.
* All rights reserved.
@@ -44,13 +44,26 @@
static struct scsi_transport_template *pm8001_stt;
+/**
+ * chip info structure to identify chip key functionality as
+ * encryption available/not, no of ports, hw specific function ref
+ */
static const struct pm8001_chip_info pm8001_chips[] = {
- [chip_8001] = { 8, &pm8001_8001_dispatch,},
+ [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
+ [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
+ [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
+ [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
};
static int pm8001_id;
LIST_HEAD(hba_list);
+struct workqueue_struct *pm8001_wq;
+
/**
* The main structure which LLDD must register for scsi core.
*/
@@ -59,8 +72,7 @@ static struct scsi_host_template pm8001_sht = {
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = pm8001_slave_configure,
- .slave_destroy = sas_slave_destroy,
+ .slave_configure = sas_slave_configure,
.scan_finished = pm8001_scan_finished,
.scan_start = pm8001_scan_start,
.change_queue_depth = sas_change_queue_depth,
@@ -74,7 +86,6 @@ static struct scsi_host_template pm8001_sht = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = pm8001_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
@@ -104,8 +115,7 @@ static struct sas_domain_function_template pm8001_transport_ops = {
*@pm8001_ha: our hba structure.
*@phy_id: phy id.
*/
-static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
- int phy_id)
+static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
{
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
@@ -134,7 +144,6 @@ static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
{
int i;
- struct pm8001_wq *wq;
if (!pm8001_ha)
return;
@@ -142,7 +151,8 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
for (i = 0; i < USI_MAX_MEMCNT; i++) {
if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
pci_free_consistent(pm8001_ha->pdev,
- pm8001_ha->memoryMap.region[i].element_size,
+ (pm8001_ha->memoryMap.region[i].total_len +
+ pm8001_ha->memoryMap.region[i].alignment),
pm8001_ha->memoryMap.region[i].virt_ptr,
pm8001_ha->memoryMap.region[i].phys_addr);
}
@@ -150,44 +160,78 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
if (pm8001_ha->shost)
scsi_host_put(pm8001_ha->shost);
- list_for_each_entry(wq, &pm8001_ha->wq_list, entry)
- cancel_delayed_work(&wq->work_q);
+ flush_workqueue(pm8001_wq);
kfree(pm8001_ha->tags);
kfree(pm8001_ha);
}
#ifdef PM8001_USE_TASKLET
+
+/**
+ * tasklet for 64 msi-x interrupt handler
+ * @opaque: the passed general host adapter struct
+ * Note: pm8001_tasklet is common for pm8001 & pm80xx
+ */
static void pm8001_tasklet(unsigned long opaque)
{
struct pm8001_hba_info *pm8001_ha;
- pm8001_ha = (struct pm8001_hba_info *)opaque;;
+ struct isr_param *irq_vector;
+
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
if (unlikely(!pm8001_ha))
BUG_ON(1);
- PM8001_CHIP_DISP->isr(pm8001_ha);
+ PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
}
#endif
+/**
+ * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
+ * It obtains the vector number and calls the equivalent bottom
+ * half or services directly.
+ * @opaque: the passed outbound queue/vector. Host structure is
+ * retrieved from the same.
+ */
+static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
+{
+ struct isr_param *irq_vector;
+ struct pm8001_hba_info *pm8001_ha;
+ irqreturn_t ret = IRQ_HANDLED;
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
+
+ if (unlikely(!pm8001_ha))
+ return IRQ_NONE;
+ if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+ return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+ tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
+#else
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
+#endif
+ return ret;
+}
+
+/**
+ * pm8001_interrupt_handler_intx - main INTx interrupt handler.
+ * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
+ */
- /**
- * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
- * dispatcher to handle each case.
- * @irq: irq number.
- * @opaque: the passed general host adapter struct
- */
-static irqreturn_t pm8001_interrupt(int irq, void *opaque)
+static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
{
struct pm8001_hba_info *pm8001_ha;
irqreturn_t ret = IRQ_HANDLED;
- struct sas_ha_struct *sha = opaque;
+ struct sas_ha_struct *sha = dev_id;
pm8001_ha = sha->lldd_ha;
if (unlikely(!pm8001_ha))
return IRQ_NONE;
if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
return IRQ_NONE;
+
#ifdef PM8001_USE_TASKLET
- tasklet_schedule(&pm8001_ha->tasklet);
+ tasklet_schedule(&pm8001_ha->tasklet[0]);
#else
- ret = PM8001_CHIP_DISP->isr(pm8001_ha);
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
#endif
return ret;
}
@@ -197,10 +241,14 @@ static irqreturn_t pm8001_interrupt(int irq, void *opaque)
* @pm8001_ha:our hba structure.
*
*/
-static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
+ const struct pci_device_id *ent)
{
int i;
spin_lock_init(&pm8001_ha->lock);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("pm8001_alloc: PHY:%x\n",
+ pm8001_ha->chip->n_phy));
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
pm8001_phy_init(pm8001_ha, i);
pm8001_ha->port[i].wide_port_phymap = 0;
@@ -224,30 +272,57 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
pm8001_ha->memoryMap.region[IOP].alignment = 32;
- /* MPI Memory region 3 for consumer Index of inbound queues */
- pm8001_ha->memoryMap.region[CI].num_elements = 1;
- pm8001_ha->memoryMap.region[CI].element_size = 4;
- pm8001_ha->memoryMap.region[CI].total_len = 4;
- pm8001_ha->memoryMap.region[CI].alignment = 4;
-
- /* MPI Memory region 4 for producer Index of outbound queues */
- pm8001_ha->memoryMap.region[PI].num_elements = 1;
- pm8001_ha->memoryMap.region[PI].element_size = 4;
- pm8001_ha->memoryMap.region[PI].total_len = 4;
- pm8001_ha->memoryMap.region[PI].alignment = 4;
-
- /* MPI Memory region 5 inbound queues */
- pm8001_ha->memoryMap.region[IB].num_elements = 256;
- pm8001_ha->memoryMap.region[IB].element_size = 64;
- pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
- pm8001_ha->memoryMap.region[IB].alignment = 64;
-
- /* MPI Memory region 6 inbound queues */
- pm8001_ha->memoryMap.region[OB].num_elements = 256;
- pm8001_ha->memoryMap.region[OB].element_size = 64;
- pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
- pm8001_ha->memoryMap.region[OB].alignment = 64;
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ /* MPI Memory region 3 for consumer Index of inbound queues */
+ pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[CI+i].element_size = 4;
+ pm8001_ha->memoryMap.region[CI+i].total_len = 4;
+ pm8001_ha->memoryMap.region[CI+i].alignment = 4;
+
+ if ((ent->driver_data) != chip_8001) {
+ /* MPI Memory region 5 inbound queues */
+ pm8001_ha->memoryMap.region[IB+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[IB+i].element_size = 128;
+ pm8001_ha->memoryMap.region[IB+i].total_len =
+ PM8001_MPI_QUEUE * 128;
+ pm8001_ha->memoryMap.region[IB+i].alignment = 128;
+ } else {
+ pm8001_ha->memoryMap.region[IB+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[IB+i].element_size = 64;
+ pm8001_ha->memoryMap.region[IB+i].total_len =
+ PM8001_MPI_QUEUE * 64;
+ pm8001_ha->memoryMap.region[IB+i].alignment = 64;
+ }
+ }
+
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ /* MPI Memory region 4 for producer Index of outbound queues */
+ pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[PI+i].element_size = 4;
+ pm8001_ha->memoryMap.region[PI+i].total_len = 4;
+ pm8001_ha->memoryMap.region[PI+i].alignment = 4;
+
+ if (ent->driver_data != chip_8001) {
+ /* MPI Memory region 6 Outbound queues */
+ pm8001_ha->memoryMap.region[OB+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[OB+i].element_size = 128;
+ pm8001_ha->memoryMap.region[OB+i].total_len =
+ PM8001_MPI_QUEUE * 128;
+ pm8001_ha->memoryMap.region[OB+i].alignment = 128;
+ } else {
+ /* MPI Memory region 6 Outbound queues */
+ pm8001_ha->memoryMap.region[OB+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[OB+i].element_size = 64;
+ pm8001_ha->memoryMap.region[OB+i].total_len =
+ PM8001_MPI_QUEUE * 64;
+ pm8001_ha->memoryMap.region[OB+i].alignment = 64;
+ }
+ }
/* Memory region write DMA*/
pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
@@ -266,6 +341,13 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
sizeof(struct pm8001_ccb_info);
+ /* Memory region for fw flash */
+ pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
+
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
for (i = 0; i < USI_MAX_MEMCNT; i++) {
if (pm8001_mem_alloc(pm8001_ha->pdev,
&pm8001_ha->memoryMap.region[i].virt_ptr,
@@ -283,7 +365,7 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
for (i = 0; i < PM8001_MAX_DEVICES; i++) {
- pm8001_ha->devices[i].dev_type = NO_DEVICE;
+ pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
pm8001_ha->devices[i].id = i;
pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
pm8001_ha->devices[i].running_req = 0;
@@ -341,9 +423,12 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
ioremap(pm8001_ha->io_mem[logicalBar].membase,
pm8001_ha->io_mem[logicalBar].memsize);
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("PCI: bar %d, logicalBar %d "
- "virt_addr=%lx,len=%d\n", bar, logicalBar,
- (unsigned long)
+ pm8001_printk("PCI: bar %d, logicalBar %d ",
+ bar, logicalBar));
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "base addr %llx virt_addr=%llx len=%d\n",
+ (u64)pm8001_ha->io_mem[logicalBar].membase,
+ (u64)(unsigned long)
pm8001_ha->io_mem[logicalBar].memvirtaddr,
pm8001_ha->io_mem[logicalBar].memsize));
} else {
@@ -362,12 +447,14 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
* @ent: ent
* @shost: scsi host struct which has been initialized before.
*/
-static struct pm8001_hba_info *__devinit
-pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
+ const struct pci_device_id *ent,
+ struct Scsi_Host *shost)
+
{
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
-
+ int j;
pm8001_ha = sha->lldd_ha;
if (!pm8001_ha)
@@ -375,21 +462,32 @@ pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
pm8001_ha->pdev = pdev;
pm8001_ha->dev = &pdev->dev;
- pm8001_ha->chip_id = chip_id;
+ pm8001_ha->chip_id = ent->driver_data;
pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
pm8001_ha->irq = pdev->irq;
pm8001_ha->sas = sha;
pm8001_ha->shost = shost;
pm8001_ha->id = pm8001_id++;
- INIT_LIST_HEAD(&pm8001_ha->wq_list);
pm8001_ha->logging_level = 0x01;
sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+ /* IOMB size is 128 for 8088/89 controllers */
+ if (pm8001_ha->chip_id != chip_8001)
+ pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
+ else
+ pm8001_ha->iomb_size = IOMB_SIZE_SPC;
+
#ifdef PM8001_USE_TASKLET
- tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
- (unsigned long)pm8001_ha);
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
#endif
pm8001_ioremap(pm8001_ha);
- if (!pm8001_alloc(pm8001_ha))
+ if (!pm8001_alloc(pm8001_ha, ent))
return pm8001_ha;
pm8001_free(pm8001_ha);
return NULL;
@@ -436,8 +534,8 @@ static int pci_go_44(struct pci_dev *pdev)
* @shost: scsi host which has been allocated outside.
* @chip_info: our ha struct.
*/
-static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
- const struct pm8001_chip_info *chip_info)
+static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
{
int phy_nr, port_nr;
struct asd_sas_phy **arr_phy;
@@ -482,8 +580,8 @@ exit:
* @shost: scsi host which has been allocated outside
* @chip_info: our ha struct.
*/
-static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
- const struct pm8001_chip_info *chip_info)
+static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
{
int i = 0;
struct pm8001_hba_info *pm8001_ha;
@@ -514,21 +612,53 @@ static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
*/
static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
{
- u8 i;
+ u8 i, j;
#ifdef PM8001_READ_VPD
+ /* For new SPC controllers WWN is stored in flash vpd
+ * For SPC/SPCve controllers WWN is stored in EEPROM
+ * For Older SPC WWN is stored in NVMD
+ */
DECLARE_COMPLETION_ONSTACK(completion);
struct pm8001_ioctl_payload payload;
+ u16 deviceid;
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
pm8001_ha->nvmd_completion = &completion;
- payload.minor_function = 0;
- payload.length = 128;
- payload.func_specific = kzalloc(128, GFP_KERNEL);
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ payload.minor_function = 4;
+ payload.length = 4096;
+ } else {
+ payload.minor_function = 0;
+ payload.length = 128;
+ }
+ } else {
+ payload.minor_function = 1;
+ payload.length = 4096;
+ }
+ payload.offset = 0;
+ payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
wait_for_completion(&completion);
+
+ for (i = 0, j = 0; i <= 7; i++, j++) {
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (deviceid == 0x8081)
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x704 + i];
+ else if (deviceid == 0x0042)
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x010 + i];
+ } else
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x804 + i];
+ }
+
for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
- memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
- SAS_ADDR_SIZE);
+ memcpy(&pm8001_ha->phy[i].dev_sas_addr,
+ pm8001_ha->sas_addr, SAS_ADDR_SIZE);
PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("phy %d sas_addr = %016llx \n", i,
+ pm8001_printk("phy %d sas_addr = %016llx\n", i,
pm8001_ha->phy[i].dev_sas_addr));
}
#else
@@ -543,37 +673,84 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
#endif
}
+/*
+ * pm8001_get_phy_settings_info : Read phy setting values.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
+{
+
+#ifdef PM8001_READ_VPD
+ /*OPTION ROM FLASH read for the SPC cards */
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+
+ pm8001_ha->nvmd_completion = &completion;
+ /* SAS ADDRESS read from flash / EEPROM */
+ payload.minor_function = 6;
+ payload.offset = 0;
+ payload.length = 4096;
+ payload.func_specific = kzalloc(4096, GFP_KERNEL);
+ if (!payload.func_specific)
+ return -ENOMEM;
+ /* Read phy setting values from flash */
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+ wait_for_completion(&completion);
+ pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
+ kfree(payload.func_specific);
+#endif
+ return 0;
+}
+
#ifdef PM8001_USE_MSIX
/**
* pm8001_setup_msix - enable MSI-X interrupt
* @chip_info: our ha struct.
* @irq_handler: irq_handler
*/
-static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
- irq_handler_t irq_handler)
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
{
u32 i = 0, j = 0;
- u32 number_of_intr = 1;
+ u32 number_of_intr;
int flag = 0;
u32 max_entry;
int rc;
+ static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
+
+ /* SPCv controllers supports 64 msi-x */
+ if (pm8001_ha->chip_id == chip_8001) {
+ number_of_intr = 1;
+ } else {
+ number_of_intr = PM8001_MAX_MSIX_VEC;
+ flag &= ~IRQF_SHARED;
+ }
+
max_entry = sizeof(pm8001_ha->msix_entries) /
sizeof(pm8001_ha->msix_entries[0]);
- flag |= IRQF_DISABLED;
for (i = 0; i < max_entry ; i++)
pm8001_ha->msix_entries[i].entry = i;
rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
number_of_intr);
pm8001_ha->number_of_intr = number_of_intr;
if (!rc) {
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "pci_enable_msix request ret:%d no of intr %d\n",
+ rc, pm8001_ha->number_of_intr));
+
+
for (i = 0; i < number_of_intr; i++) {
+ snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
+ DRV_NAME"%d", i);
+ pm8001_ha->irq_vector[i].irq_id = i;
+ pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
+
if (request_irq(pm8001_ha->msix_entries[i].vector,
- irq_handler, flag, DRV_NAME,
- SHOST_TO_SAS_HA(pm8001_ha->shost))) {
+ pm8001_interrupt_handler_msix, flag,
+ intr_drvname[i], &(pm8001_ha->irq_vector[i]))) {
for (j = 0; j < i; j++)
free_irq(
pm8001_ha->msix_entries[j].vector,
- SHOST_TO_SAS_HA(pm8001_ha->shost));
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pm8001_ha->pdev);
break;
}
@@ -590,22 +767,24 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
{
struct pci_dev *pdev;
- irq_handler_t irq_handler = pm8001_interrupt;
int rc;
pdev = pm8001_ha->pdev;
#ifdef PM8001_USE_MSIX
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
- return pm8001_setup_msix(pm8001_ha, irq_handler);
- else
+ if (pdev->msix_cap)
+ return pm8001_setup_msix(pm8001_ha);
+ else {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MSIX not supported!!!\n"));
goto intx;
+ }
#endif
intx:
- /* intialize the INT-X interrupt */
- rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
- SHOST_TO_SAS_HA(pm8001_ha->shost));
+ /* initialize the INT-X interrupt */
+ rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
+ DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
return rc;
}
@@ -618,17 +797,18 @@ intx:
* pci driver it is invoked, all struct an hardware initilization should be done
* here, also, register interrupt
*/
-static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int pm8001_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
unsigned int rc;
u32 pci_reg;
+ u8 i = 0;
struct pm8001_hba_info *pm8001_ha;
struct Scsi_Host *shost = NULL;
const struct pm8001_chip_info *chip;
dev_printk(KERN_INFO, &pdev->dev,
- "pm8001: driver version %s\n", DRV_VERSION);
+ "pm80xx: driver version %s\n", DRV_VERSION);
rc = pci_enable_device(pdev);
if (rc)
goto err_out_enable;
@@ -667,26 +847,47 @@ static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
goto err_out_free;
}
pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
- pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
+ /* ent->driver variable is used to differentiate between controllers */
+ pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
if (!pm8001_ha) {
rc = -ENOMEM;
goto err_out_free;
}
list_add_tail(&pm8001_ha->list, &hba_list);
- PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
- if (rc)
+ if (rc) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "chip_init failed [ret: %d]\n", rc));
goto err_out_ha_free;
+ }
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha_free;
rc = pm8001_request_irq(pm8001_ha);
- if (rc)
+ if (rc) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "pm8001_request_irq failed [ret: %d]\n", rc));
goto err_out_shost;
+ }
+
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+ if (pm8001_ha->chip_id != chip_8001) {
+ for (i = 1; i < pm8001_ha->number_of_intr; i++)
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+ /* setup thermal configuration. */
+ pm80xx_set_thermal_config(pm8001_ha);
+ }
- PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
pm8001_init_sas_add(pm8001_ha);
+ /* phy setting support for motherboard controller */
+ if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
+ pdev->subsystem_vendor != 0) {
+ rc = pm8001_get_phy_settings_info(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+ }
pm8001_post_sas_ha_init(shost, chip);
rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
if (rc)
@@ -710,31 +911,36 @@ err_out_enable:
return rc;
}
-static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+static void pm8001_pci_remove(struct pci_dev *pdev)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i;
+ int i, j;
pm8001_ha = sha->lldd_ha;
- pci_set_drvdata(pdev, NULL);
sas_unregister_ha(sha);
sas_remove_host(pm8001_ha->shost);
list_del(&pm8001_ha->list);
scsi_remove_host(pm8001_ha->shost);
- PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
- PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
#ifdef PM8001_USE_MSIX
for (i = 0; i < pm8001_ha->number_of_intr; i++)
synchronize_irq(pm8001_ha->msix_entries[i].vector);
for (i = 0; i < pm8001_ha->number_of_intr; i++)
- free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ free_irq(pm8001_ha->msix_entries[i].vector,
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pdev);
#else
free_irq(pm8001_ha->irq, sha);
#endif
#ifdef PM8001_USE_TASKLET
- tasklet_kill(&pm8001_ha->tasklet);
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
#endif
pm8001_free(pm8001_ha);
kfree(sha->sas_phy);
@@ -755,29 +961,34 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i, j;
u32 device_state;
pm8001_ha = sha->lldd_ha;
- flush_scheduled_work();
+ flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
- PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
- PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
#ifdef PM8001_USE_MSIX
for (i = 0; i < pm8001_ha->number_of_intr; i++)
synchronize_irq(pm8001_ha->msix_entries[i].vector);
for (i = 0; i < pm8001_ha->number_of_intr; i++)
- free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ free_irq(pm8001_ha->msix_entries[i].vector,
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pdev);
#else
free_irq(pm8001_ha->irq, sha);
#endif
#ifdef PM8001_USE_TASKLET
- tasklet_kill(&pm8001_ha->tasklet);
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
#endif
device_state = pci_choose_state(pdev, state);
pm8001_printk("pdev=0x%p, slot=%s, entering "
@@ -800,6 +1011,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
int rc;
+ u8 i = 0, j;
u32 device_state;
pm8001_ha = sha->lldd_ha;
device_state = pdev->current_state;
@@ -822,19 +1034,37 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
if (rc)
goto err_out_disable;
- PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ /* chip soft rst only for spc */
+ if (pm8001_ha->chip_id == chip_8001) {
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip soft reset successful\n"));
+ }
rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
if (rc)
goto err_out_disable;
- PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+
+ /* disable all the interrupt bits */
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+
rc = pm8001_request_irq(pm8001_ha);
if (rc)
goto err_out_disable;
- #ifdef PM8001_USE_TASKLET
- tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
- (unsigned long)pm8001_ha);
- #endif
- PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+#ifdef PM8001_USE_TASKLET
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
+#endif
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+ if (pm8001_ha->chip_id != chip_8001) {
+ for (i = 1; i < pm8001_ha->number_of_intr; i++)
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+ }
scsi_unblock_requests(pm8001_ha->shost);
return 0;
@@ -845,14 +1075,66 @@ err_out_enable:
return rc;
}
-static struct pci_device_id __devinitdata pm8001_pci_table[] = {
- {
- PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
- },
- {
- PCI_DEVICE(0x117c, 0x0042),
- .driver_data = chip_8001
- },
+/* update of pci device, vendor id and driver data with
+ * unique value for each of the controller
+ */
+static struct pci_device_id pm8001_pci_table[] = {
+ { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
+ { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
+ /* Support for SPC/SPCv/SPCve controllers */
+ { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
{} /* terminate list */
};
@@ -860,7 +1142,7 @@ static struct pci_driver pm8001_pci_driver = {
.name = DRV_NAME,
.id_table = pm8001_pci_table,
.probe = pm8001_pci_probe,
- .remove = __devexit_p(pm8001_pci_remove),
+ .remove = pm8001_pci_remove,
.suspend = pm8001_pci_suspend,
.resume = pm8001_pci_resume,
};
@@ -870,17 +1152,26 @@ static struct pci_driver pm8001_pci_driver = {
*/
static int __init pm8001_init(void)
{
- int rc;
+ int rc = -ENOMEM;
+
+ pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
+ if (!pm8001_wq)
+ goto err;
+
pm8001_id = 0;
pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
if (!pm8001_stt)
- return -ENOMEM;
+ goto err_wq;
rc = pci_register_driver(&pm8001_pci_driver);
if (rc)
- goto err_out;
+ goto err_tp;
return 0;
-err_out:
+
+err_tp:
sas_release_transport(pm8001_stt);
+err_wq:
+ destroy_workqueue(pm8001_wq);
+err:
return rc;
}
@@ -888,13 +1179,19 @@ static void __exit pm8001_exit(void)
{
pci_unregister_driver(&pm8001_pci_driver);
sas_release_transport(pm8001_stt);
+ destroy_workqueue(pm8001_wq);
}
module_init(pm8001_init);
module_exit(pm8001_exit);
MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
-MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
+MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
+MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
+MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
+MODULE_DESCRIPTION(
+ "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
+ "SAS/SATA controller driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 6ae059ebb4b..8a44bc92bc7 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -1,5 +1,5 @@
/*
- * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
*
* Copyright (c) 2008-2009 USI Co., Ltd.
* All rights reserved.
@@ -68,7 +68,7 @@ static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
clear_bit(tag, bitmap);
}
-static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
{
pm8001_tag_clear(pm8001_ha, tag);
}
@@ -166,6 +166,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
struct pm8001_hba_info *pm8001_ha = NULL;
struct sas_phy_linkrates *rates;
DECLARE_COMPLETION_ONSTACK(completion);
+ unsigned long flags;
pm8001_ha = sas_phy->ha->lldd_ha;
pm8001_ha->phy[phy_id].enable_completion = &completion;
switch (func) {
@@ -209,6 +210,30 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
case PHY_FUNC_DISABLE:
PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
break;
+ case PHY_FUNC_GET_EVENTS:
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ (phy_id < 4) ? 0x30000 : 0x40000)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return -EINVAL;
+ }
+ }
+ {
+ struct sas_phy *phy = sas_phy->phy;
+ uint32_t *qp = (uint32_t *)(((char *)
+ pm8001_ha->io_mem[2].memvirtaddr)
+ + 0x1034 + (0x4000 * (phy_id & 3)));
+
+ phy->invalid_dword_count = qp[0];
+ phy->running_disparity_error_count = qp[1];
+ phy->loss_of_dword_sync_count = qp[3];
+ phy->phy_reset_problem_count = qp[4];
+ }
+ if (pm8001_ha->chip_id == chip_8001)
+ pm8001_bar4_shift(pm8001_ha, 0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return 0;
default:
rc = -EOPNOTSUPP;
}
@@ -216,20 +241,6 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
return rc;
}
-int pm8001_slave_alloc(struct scsi_device *scsi_dev)
-{
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
- if (dev_is_sata(dev)) {
- /* We don't need to rescan targets
- * if REPORT_LUNS request is failed
- */
- if (scsi_dev->lun > 0)
- return -ENXIO;
- scsi_dev->tagged_supported = 1;
- }
- return sas_slave_alloc(scsi_dev);
-}
-
/**
* pm8001_scan_start - we should enable all HBA phys by sending the phy_start
* command to HBA.
@@ -241,19 +252,23 @@ void pm8001_scan_start(struct Scsi_Host *shost)
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
pm8001_ha = sha->lldd_ha;
- PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
+ /* SAS_RE_INITIALIZATION not available in SPCv/ve */
+ if (pm8001_ha->chip_id == chip_8001)
+ PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
}
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+
/* give the phy enabling interrupt event time to come in (1s
* is empirically about all it takes) */
if (time < HZ)
return 0;
/* Wait for discovery to finish */
- scsi_flush_work(shost);
+ sas_drain_work(ha);
return 1;
}
@@ -314,22 +329,7 @@ static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
{
return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
}
-int pm8001_slave_configure(struct scsi_device *sdev)
-{
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_slave_configure(sdev);
- if (ret)
- return ret;
- if (dev_is_sata(dev)) {
- #ifdef PM8001_DISABLE_NCQ
- struct ata_port *ap = dev->sata_dev.ap;
- struct ata_device *adev = ap->link.device;
- adev->flags |= ATA_DFLAG_NCQ_OFF;
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
- #endif
- }
- return 0;
-}
+
/* Find the local port id that's attached to this device */
static int sas_find_local_port_id(struct domain_device *dev)
{
@@ -357,7 +357,7 @@ static int sas_find_local_port_id(struct domain_device *dev)
* @tmf: the task management IU
*/
#define DEV_IS_GONE(pm8001_dev) \
- ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+ ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
static int pm8001_task_exec(struct sas_task *task, const int num,
gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
{
@@ -369,13 +369,13 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
struct pm8001_ccb_info *ccb;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
u32 n = num;
- unsigned long flags = 0, flags_libsas = 0;
+ unsigned long flags = 0;
if (!dev->port) {
struct task_status_struct *tsm = &t->task_status;
tsm->resp = SAS_TASK_UNDELIVERED;
tsm->stat = SAS_PHY_DOWN;
- if (dev->dev_type != SATA_DEV)
+ if (dev->dev_type != SAS_SATA_DEV)
t->task_done(t);
return 0;
}
@@ -385,32 +385,15 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
do {
dev = t->dev;
pm8001_dev = dev->lldd_dev;
- if (DEV_IS_GONE(pm8001_dev)) {
- if (pm8001_dev) {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %d not ready.\n",
- pm8001_dev->device_id));
- } else {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk("device %016llx not "
- "ready.\n", SAS_ADDR(dev->sas_addr)));
- }
- rc = SAS_PHY_DOWN;
- goto out_done;
- }
port = &pm8001_ha->port[sas_find_local_port_id(dev)];
- if (!port->port_attached) {
+ if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
if (sas_protocol_ata(t->task_proto)) {
struct task_status_struct *ts = &t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- spin_unlock_irqrestore(dev->sata_dev.ap->lock,
- flags_libsas);
t->task_done(t);
- spin_lock_irqsave(dev->sata_dev.ap->lock,
- flags_libsas);
spin_lock_irqsave(&pm8001_ha->lock, flags);
if (n > 1)
t = list_entry(t->list.next,
@@ -451,6 +434,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
ccb->n_elem = n_elem;
ccb->ccb_tag = tag;
ccb->task = t;
+ ccb->device = pm8001_dev;
switch (t->task_proto) {
case SAS_PROTOCOL_SMP:
rc = pm8001_task_prep_smp(pm8001_ha, ccb);
@@ -464,7 +448,6 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
rc = pm8001_task_prep_ata(pm8001_ha, ccb);
break;
default:
@@ -558,6 +541,7 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
task->lldd_task = NULL;
ccb->task = NULL;
ccb->ccb_tag = 0xFFFFFFFF;
+ ccb->open_retry = 0;
pm8001_ccb_free(pm8001_ha, ccb_idx);
}
@@ -569,7 +553,7 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
{
u32 dev;
for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
- if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+ if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
pm8001_ha->devices[dev].id = dev;
return &pm8001_ha->devices[dev];
}
@@ -581,13 +565,31 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
}
return NULL;
}
+/**
+ * pm8001_find_dev - find a matching pm8001_device
+ * @pm8001_ha: our hba card information
+ */
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id)
+{
+ u32 dev;
+ for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+ if (pm8001_ha->devices[dev].device_id == device_id)
+ return &pm8001_ha->devices[dev];
+ }
+ if (dev == PM8001_MAX_DEVICES) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
+ "DEVICE FOUND !!!\n"));
+ }
+ return NULL;
+}
static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
{
u32 id = pm8001_dev->id;
memset(pm8001_dev, 0, sizeof(*pm8001_dev));
pm8001_dev->id = id;
- pm8001_dev->dev_type = NO_DEVICE;
+ pm8001_dev->dev_type = SAS_PHY_UNUSED;
pm8001_dev->device_id = PM8001_MAX_DEVICES;
pm8001_dev->sas_device = NULL;
}
@@ -645,19 +647,19 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
res = -1;
}
} else {
- if (dev->dev_type == SATA_DEV) {
+ if (dev->dev_type == SAS_SATA_DEV) {
pm8001_device->attached_phy =
dev->rphy->identify.phy_identifier;
flag = 1; /* directly sata*/
}
} /*register this device to HBA*/
- PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
wait_for_completion(&completion);
- if (dev->dev_type == SAS_END_DEV)
+ if (dev->dev_type == SAS_END_DEVICE)
msleep(50);
- pm8001_ha->flags |= PM8001F_RUN_TIME ;
+ pm8001_ha->flags = PM8001F_RUN_TIME;
return 0;
found_out:
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
@@ -669,35 +671,11 @@ int pm8001_dev_found(struct domain_device *dev)
return pm8001_dev_found_notify(dev);
}
-/**
- * pm8001_alloc_task - allocate a task structure for TMF
- */
-static struct sas_task *pm8001_alloc_task(void)
+void pm8001_task_done(struct sas_task *task)
{
- struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
- if (task) {
- INIT_LIST_HEAD(&task->list);
- spin_lock_init(&task->task_state_lock);
- task->task_state_flags = SAS_TASK_STATE_PENDING;
- init_timer(&task->timer);
- init_completion(&task->completion);
- }
- return task;
-}
-
-static void pm8001_free_task(struct sas_task *task)
-{
- if (task) {
- BUG_ON(!list_empty(&task->list));
- kfree(task);
- }
-}
-
-static void pm8001_task_done(struct sas_task *task)
-{
- if (!del_timer(&task->timer))
+ if (!del_timer(&task->slow_task->timer))
return;
- complete(&task->completion);
+ complete(&task->slow_task->completion);
}
static void pm8001_tmf_timedout(unsigned long data)
@@ -705,7 +683,7 @@ static void pm8001_tmf_timedout(unsigned long data)
struct sas_task *task = (struct sas_task *)data;
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
- complete(&task->completion);
+ complete(&task->slow_task->completion);
}
#define PM8001_TASK_TIMEOUT 20
@@ -726,9 +704,11 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
int res, retry;
struct sas_task *task = NULL;
struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
for (retry = 0; retry < 3; retry++) {
- task = pm8001_alloc_task();
+ task = sas_alloc_slow_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
@@ -736,21 +716,27 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
task->task_proto = dev->tproto;
memcpy(&task->ssp_task, parameter, para_len);
task->task_done = pm8001_task_done;
- task->timer.data = (unsigned long)task;
- task->timer.function = pm8001_tmf_timedout;
- task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
- add_timer(&task->timer);
+ task->slow_task->timer.data = (unsigned long)task;
+ task->slow_task->timer.function = pm8001_tmf_timedout;
+ task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+ add_timer(&task->slow_task->timer);
res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
if (res) {
- del_timer(&task->timer);
+ del_timer(&task->slow_task->timer);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Executing internal task "
"failed\n"));
goto ex_err;
}
- wait_for_completion(&task->completion);
+ wait_for_completion(&task->slow_task->completion);
+ if (pm8001_ha->chip_id != chip_8001) {
+ pm8001_dev->setds_completion = &completion_setstate;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x01);
+ wait_for_completion(&completion_setstate);
+ }
res = -TMF_RESP_FUNC_FAILED;
/* Even TMF timed out, return direct. */
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
@@ -789,14 +775,13 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat));
- pm8001_free_task(task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- if (task != NULL)
- pm8001_free_task(task);
+ sas_free_task(task);
return res;
}
@@ -811,17 +796,17 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
struct sas_task *task = NULL;
for (retry = 0; retry < 3; retry++) {
- task = pm8001_alloc_task();
+ task = sas_alloc_slow_task(GFP_KERNEL);
if (!task)
return -ENOMEM;
task->dev = dev;
task->task_proto = dev->tproto;
task->task_done = pm8001_task_done;
- task->timer.data = (unsigned long)task;
- task->timer.function = pm8001_tmf_timedout;
- task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
- add_timer(&task->timer);
+ task->slow_task->timer.data = (unsigned long)task;
+ task->slow_task->timer.function = pm8001_tmf_timedout;
+ task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
+ add_timer(&task->slow_task->timer);
res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
if (res)
@@ -835,13 +820,13 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
pm8001_dev, flag, task_tag, ccb_tag);
if (res) {
- del_timer(&task->timer);
+ del_timer(&task->slow_task->timer);
PM8001_FAIL_DBG(pm8001_ha,
pm8001_printk("Executing internal task "
"failed\n"));
goto ex_err;
}
- wait_for_completion(&task->completion);
+ wait_for_completion(&task->slow_task->completion);
res = TMF_RESP_FUNC_FAILED;
/* Even TMF timed out, return direct. */
if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
@@ -864,14 +849,13 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat));
- pm8001_free_task(task);
+ sas_free_task(task);
task = NULL;
}
}
ex_err:
BUG_ON(retry == 3 && task != NULL);
- if (task != NULL)
- pm8001_free_task(task);
+ sas_free_task(task);
return res;
}
@@ -882,13 +866,11 @@ ex_err:
static void pm8001_dev_gone_notify(struct domain_device *dev)
{
unsigned long flags = 0;
- u32 tag;
struct pm8001_hba_info *pm8001_ha;
struct pm8001_device *pm8001_dev = dev->lldd_dev;
pm8001_ha = pm8001_find_ha_by_dev(dev);
spin_lock_irqsave(&pm8001_ha->lock, flags);
- pm8001_tag_alloc(pm8001_ha, &tag);
if (pm8001_dev) {
u32 device_id = pm8001_dev->device_id;
@@ -928,6 +910,77 @@ static int pm8001_issue_ssp_tmf(struct domain_device *dev,
tmf);
}
+/* retry commands by ha, by task and/or by device */
+void pm8001_open_reject_retry(
+ struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task_to_close,
+ struct pm8001_device *device_to_close)
+{
+ int i;
+ unsigned long flags;
+
+ if (pm8001_ha == NULL)
+ return;
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ for (i = 0; i < PM8001_MAX_CCB; i++) {
+ struct sas_task *task;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags1;
+ u32 tag;
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
+
+ pm8001_dev = ccb->device;
+ if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
+ continue;
+ if (!device_to_close) {
+ uintptr_t d = (uintptr_t)pm8001_dev
+ - (uintptr_t)&pm8001_ha->devices;
+ if (((d % sizeof(*pm8001_dev)) != 0)
+ || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
+ continue;
+ } else if (pm8001_dev != device_to_close)
+ continue;
+ tag = ccb->ccb_tag;
+ if (!tag || (tag == 0xFFFFFFFF))
+ continue;
+ task = ccb->task;
+ if (!task || !task->task_done)
+ continue;
+ if (task_to_close && (task != task_to_close))
+ continue;
+ ts = &task->task_status;
+ ts->resp = SAS_TASK_COMPLETE;
+ /* Force the midlayer to retry */
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ spin_lock_irqsave(&task->task_state_lock, flags1);
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags
+ & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags1);
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags1);
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ task->task_done(task);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ }
+ }
+
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
/**
* Standard mandates link reset for ATA (type 0) and hard reset for
* SSP (type 1) , only for RECOVERY
@@ -938,17 +991,20 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
struct pm8001_device *pm8001_dev;
struct pm8001_hba_info *pm8001_ha;
struct sas_phy *phy;
+
if (!dev || !dev->lldd_dev)
- return -1;
+ return -ENODEV;
pm8001_dev = dev->lldd_dev;
pm8001_ha = pm8001_find_ha_by_dev(dev);
- phy = sas_find_local_phy(dev);
+ phy = sas_get_local_phy(dev);
if (dev_is_sata(dev)) {
DECLARE_COMPLETION_ONSTACK(completion_setstate);
- if (scsi_is_sas_phy_local(phy))
- return 0;
+ if (scsi_is_sas_phy_local(phy)) {
+ rc = 0;
+ goto out;
+ }
rc = sas_phy_reset(phy, 1);
msleep(2000);
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
@@ -957,15 +1013,83 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
pm8001_dev, 0x01);
wait_for_completion(&completion_setstate);
- } else{
- rc = sas_phy_reset(phy, 1);
- msleep(2000);
+ } else {
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
}
PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
pm8001_dev->device_id, rc));
+ out:
+ sas_put_local_phy(phy);
return rc;
}
+/*
+* This function handle the IT_NEXUS_XXX event or completion
+* status code for SSP/SATA/SMP I/O request.
+*/
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_phy *phy;
+ u32 device_id = 0;
+
+ if (!dev || !dev->lldd_dev)
+ return -1;
+
+ pm8001_dev = dev->lldd_dev;
+ device_id = pm8001_dev->device_id;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("I_T_Nexus handler invoked !!"));
+
+ phy = sas_get_local_phy(dev);
+
+ if (dev_is_sata(dev)) {
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+ if (scsi_is_sas_phy_local(phy)) {
+ rc = 0;
+ goto out;
+ }
+ /* send internal ssp/sata/smp abort command to FW */
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ pm8001_dev->setds_completion = &completion_setstate;
+
+ wait_for_completion(&completion_setstate);
+ } else {
+ /* send internal ssp/sata/smp abort command to FW */
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ }
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc));
+out:
+ sas_put_local_phy(phy);
+
+ return rc;
+}
/* mandatory SAM-3, the task reset the specified LUN*/
int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
{
@@ -973,14 +1097,17 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
struct pm8001_tmf_task tmf_task;
struct pm8001_device *pm8001_dev = dev->lldd_dev;
struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
if (dev_is_sata(dev)) {
- struct sas_phy *phy = sas_find_local_phy(dev);
+ struct sas_phy *phy = sas_get_local_phy(dev);
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
rc = sas_phy_reset(phy, 1);
+ sas_put_local_phy(phy);
+ pm8001_dev->setds_completion = &completion_setstate;
rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
pm8001_dev, 0x01);
- msleep(2000);
+ wait_for_completion(&completion_setstate);
} else {
tmf_task.tmf = TMF_LU_RESET;
rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
@@ -1026,13 +1153,14 @@ int pm8001_query_task(struct sas_task *task)
/* The task is still in Lun, release it then */
case TMF_RESP_FUNC_SUCC:
PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("The task is still in Lun \n"));
+ pm8001_printk("The task is still in Lun\n"));
+ break;
/* The task is not in Lun or failed, reset the phy */
case TMF_RESP_FUNC_FAILED:
case TMF_RESP_FUNC_COMPLETE:
PM8001_EH_DBG(pm8001_ha,
pm8001_printk("The task is not in Lun or failed,"
- " reset the phy \n"));
+ " reset the phy\n"));
break;
}
}
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 8e38ca8cd10..1ee06f21803 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -1,5 +1,5 @@
/*
- * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
*
* Copyright (c) 2008-2009 USI Co., Ltd.
* All rights reserved.
@@ -50,15 +50,15 @@
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
+#include <linux/workqueue.h>
#include <scsi/libsas.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
-#include <asm/atomic.h>
+#include <linux/atomic.h>
#include "pm8001_defs.h"
-#define DRV_NAME "pm8001"
-#define DRV_VERSION "0.1.36"
+#define DRV_NAME "pm80xx"
+#define DRV_VERSION "0.1.37"
#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
@@ -66,8 +66,8 @@
#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
-#define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\
- __func__, __LINE__, ## arg)
+#define pm8001_printk(format, arg...) printk(KERN_INFO "pm80xx %s %d:" \
+ format, __func__, __LINE__, ## arg)
#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
do { \
if (unlikely(HBA->logging_level & LEVEL)) \
@@ -103,11 +103,15 @@ do { \
#define PM8001_READ_VPD
-#define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV))
+#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
+#define IS_SPCV_12G(dev) ((dev->device == 0X8074) \
+ || (dev->device == 0X8076) \
+ || (dev->device == 0X8077))
#define PM8001_NAME_LENGTH 32/* generic length of strings */
extern struct list_head hba_list;
extern const struct pm8001_dispatch pm8001_8001_dispatch;
+extern const struct pm8001_dispatch pm8001_80xx_dispatch;
struct pm8001_hba_info;
struct pm8001_ccb_info;
@@ -128,18 +132,73 @@ struct pm8001_ioctl_payload {
u8 *func_specific;
};
+#define MPI_FATAL_ERROR_TABLE_OFFSET_MASK 0xFFFFFF
+#define MPI_FATAL_ERROR_TABLE_SIZE(value) ((0xFF000000 & value) >> SHIFT24)
+#define MPI_FATAL_EDUMP_TABLE_LO_OFFSET 0x00 /* HNFBUFL */
+#define MPI_FATAL_EDUMP_TABLE_HI_OFFSET 0x04 /* HNFBUFH */
+#define MPI_FATAL_EDUMP_TABLE_LENGTH 0x08 /* HNFBLEN */
+#define MPI_FATAL_EDUMP_TABLE_HANDSHAKE 0x0C /* FDDHSHK */
+#define MPI_FATAL_EDUMP_TABLE_STATUS 0x10 /* FDDTSTAT */
+#define MPI_FATAL_EDUMP_TABLE_ACCUM_LEN 0x14 /* ACCDDLEN */
+#define MPI_FATAL_EDUMP_HANDSHAKE_RDY 0x1
+#define MPI_FATAL_EDUMP_HANDSHAKE_BUSY 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_RSVD 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED 0x1
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA 0x2
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE 0x3
+#define TYPE_GSM_SPACE 1
+#define TYPE_QUEUE 2
+#define TYPE_FATAL 3
+#define TYPE_NON_FATAL 4
+#define TYPE_INBOUND 1
+#define TYPE_OUTBOUND 2
+struct forensic_data {
+ u32 data_type;
+ union {
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ void *direct_data;
+ } gsm_buf;
+ struct {
+ u16 queue_type;
+ u16 queue_index;
+ u32 direct_len;
+ void *direct_data;
+ } queue_buf;
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ u32 read_len;
+ void *direct_data;
+ } data_buf;
+ };
+};
+
+/* bit31-26 - mask bar */
+#define SCRATCH_PAD0_BAR_MASK 0xFC000000
+/* bit25-0 - offset mask */
+#define SCRATCH_PAD0_OFFSET_MASK 0x03FFFFFF
+/* if AAP error state */
+#define SCRATCH_PAD0_AAPERR_MASK 0xFFFFFFFF
+/* Inbound doorbell bit7 */
+#define SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP 0x80
+/* Inbound doorbell bit7 SPCV */
+#define SPCV_MSGU_CFG_TABLE_TRANSFER_DEBUG_INFO 0x80
+#define MAIN_MERRDCTO_MERRDCES 0xA0/* DWORD 0x28) */
+
struct pm8001_dispatch {
char *name;
int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
- int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha, u32 signature);
+ int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha);
void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
- irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha);
+ irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha, u8 vec);
u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
- int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha);
- void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha);
- void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha);
+ int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
struct pm8001_ccb_info *ccb);
@@ -173,6 +232,7 @@ struct pm8001_dispatch {
};
struct pm8001_chip_info {
+ u32 encrypt;
u32 n_phy;
const struct pm8001_dispatch *dispatch;
};
@@ -204,7 +264,7 @@ struct pm8001_phy {
};
struct pm8001_device {
- enum sas_dev_type dev_type;
+ enum sas_device_type dev_type;
struct domain_device *sas_device;
u32 attached_phy;
u32 id;
@@ -235,6 +295,7 @@ struct pm8001_ccb_info {
struct pm8001_device *device;
struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG];
struct fw_control_ex *fw_control_context;
+ u8 open_retry;
};
struct mpi_mem {
@@ -255,7 +316,20 @@ struct mpi_mem_req {
struct mpi_mem region[USI_MAX_MEMCNT];
};
-struct main_cfg_table {
+struct encrypt {
+ u32 cipher_mode;
+ u32 sec_mode;
+ u32 status;
+ u32 flag;
+};
+
+struct sas_phy_attribute_table {
+ u32 phystart1_16[16];
+ u32 outbound_hw_event_pid1_16[16];
+};
+
+union main_cfg_table {
+ struct {
u32 signature;
u32 interface_rev;
u32 firmware_rev;
@@ -291,19 +365,70 @@ struct main_cfg_table {
u32 fatal_err_dump_length1;
u32 hda_mode_flag;
u32 anolog_setup_table_offset;
+ u32 rsvd[4];
+ } pm8001_tbl;
+
+ struct {
+ u32 signature;
+ u32 interface_rev;
+ u32 firmware_rev;
+ u32 max_out_io;
+ u32 max_sgl;
+ u32 ctrl_cap_flag;
+ u32 gst_offset;
+ u32 inbound_queue_offset;
+ u32 outbound_queue_offset;
+ u32 inbound_q_nppd_hppd;
+ u32 rsvd[8];
+ u32 crc_core_dump;
+ u32 rsvd1;
+ u32 upper_event_log_addr;
+ u32 lower_event_log_addr;
+ u32 event_log_size;
+ u32 event_log_severity;
+ u32 upper_pcs_event_log_addr;
+ u32 lower_pcs_event_log_addr;
+ u32 pcs_event_log_size;
+ u32 pcs_event_log_severity;
+ u32 fatal_err_interrupt;
+ u32 fatal_err_dump_offset0;
+ u32 fatal_err_dump_length0;
+ u32 fatal_err_dump_offset1;
+ u32 fatal_err_dump_length1;
+ u32 gpio_led_mapping;
+ u32 analog_setup_table_offset;
+ u32 int_vec_table_offset;
+ u32 phy_attr_table_offset;
+ u32 port_recovery_timer;
+ u32 interrupt_reassertion_delay;
+ u32 fatal_n_non_fatal_dump; /* 0x28 */
+ } pm80xx_tbl;
};
-struct general_status_table {
+
+union general_status_table {
+ struct {
u32 gst_len_mpistate;
u32 iq_freeze_state0;
u32 iq_freeze_state1;
u32 msgu_tcnt;
u32 iop_tcnt;
- u32 reserved;
+ u32 rsvd;
u32 phy_state[8];
- u32 reserved1;
- u32 reserved2;
- u32 reserved3;
+ u32 gpio_input_val;
+ u32 rsvd1[2];
u32 recover_err_info[8];
+ } pm8001_tbl;
+ struct {
+ u32 gst_len_mpistate;
+ u32 iq_freeze_state0;
+ u32 iq_freeze_state1;
+ u32 msgu_tcnt;
+ u32 iop_tcnt;
+ u32 rsvd[9];
+ u32 gpio_input_val;
+ u32 rsvd1[2];
+ u32 recover_err_info[8];
+ } pm80xx_tbl;
};
struct inbound_queue_table {
u32 element_pri_size_cnt;
@@ -341,6 +466,10 @@ struct pm8001_hba_memspace {
u64 membase;
u32 memsize;
};
+struct isr_param {
+ struct pm8001_hba_info *drv_inst;
+ u32 irq_id;
+};
struct pm8001_hba_info {
char name[PM8001_NAME_LENGTH];
struct list_head list;
@@ -350,15 +479,29 @@ struct pm8001_hba_info {
struct device *dev;
struct pm8001_hba_memspace io_mem[6];
struct mpi_mem_req memoryMap;
+ struct encrypt encrypt_info; /* support encryption */
+ struct forensic_data forensic_info;
+ u32 fatal_bar_loc;
+ u32 forensic_last_offset;
+ u32 fatal_forensic_shift_offset;
+ u32 forensic_fatal_step;
+ u32 evtlog_ib_offset;
+ u32 evtlog_ob_offset;
void __iomem *msg_unit_tbl_addr;/*Message Unit Table Addr*/
void __iomem *main_cfg_tbl_addr;/*Main Config Table Addr*/
void __iomem *general_stat_tbl_addr;/*General Status Table Addr*/
void __iomem *inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
void __iomem *outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
- struct main_cfg_table main_cfg_tbl;
- struct general_status_table gs_tbl;
- struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_INB_NUM];
- struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+ void __iomem *pspa_q_tbl_addr;
+ /*MPI SAS PHY attributes Queue Config Table Addr*/
+ void __iomem *ivt_tbl_addr; /*MPI IVT Table Addr */
+ void __iomem *fatal_tbl_addr; /*MPI IVT Table Addr */
+ union main_cfg_table main_cfg_tbl;
+ union general_status_table gs_tbl;
+ struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_SPCV_INB_NUM];
+ struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_SPCV_OUTB_NUM];
+ struct sas_phy_attribute_table phy_attr_table;
+ /* MPI SAS PHY attributes */
u8 sas_addr[SAS_ADDR_SIZE];
struct sas_ha_struct *sas;/* SCSI/SAS glue */
struct Scsi_Host *shost;
@@ -371,27 +514,29 @@ struct pm8001_hba_info {
struct pm8001_port port[PM8001_MAX_PHYS];
u32 id;
u32 irq;
+ u32 iomb_size; /* SPC and SPCV IOMB size */
struct pm8001_device *devices;
struct pm8001_ccb_info *ccb_info;
#ifdef PM8001_USE_MSIX
- struct msix_entry msix_entries[16];/*for msi-x interrupt*/
+ struct msix_entry msix_entries[PM8001_MAX_MSIX_VEC];
+ /*for msi-x interrupt*/
int number_of_intr;/*will be used in remove()*/
#endif
#ifdef PM8001_USE_TASKLET
- struct tasklet_struct tasklet;
+ struct tasklet_struct tasklet[PM8001_MAX_MSIX_VEC];
#endif
- struct list_head wq_list;
u32 logging_level;
u32 fw_status;
+ u32 smp_exp_mode;
const struct firmware *fw_image;
+ struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
};
-struct pm8001_wq {
- struct delayed_work work_q;
+struct pm8001_work {
+ struct work_struct work;
struct pm8001_hba_info *pm8001_ha;
void *data;
int handler;
- struct list_head entry;
};
struct pm8001_fw_image_header {
@@ -420,6 +565,9 @@ struct pm8001_fw_image_header {
#define FLASH_UPDATE_DNLD_NOT_SUPPORTED 0x10
#define FLASH_UPDATE_DISABLED 0x11
+#define NCQ_READ_LOG_FLAG 0x80000000
+#define NCQ_ABORT_ALL_FLAG 0x40000000
+#define NCQ_2ND_RLE_FLAG 0x20000000
/**
* brief param structure for firmware flash update.
*/
@@ -447,7 +595,7 @@ struct fw_control_info {
struct fw_control_ex {
struct fw_control_info *fw_control;
void *buffer;/* keep buffer pointer to be
- freed when the responce comes*/
+ freed when the response comes*/
void *virtAddr;/* keep virtual address of the data */
void *usrAddr;/* keep virtual address of the
user data */
@@ -461,6 +609,9 @@ struct fw_control_ex {
void *param3;
};
+/* pm8001 workqueue */
+extern struct workqueue_struct *pm8001_wq;
+
/******************** function prototype *********************/
int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
@@ -470,8 +621,6 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
void *funcdata);
-int pm8001_slave_alloc(struct scsi_device *scsi_dev);
-int pm8001_slave_configure(struct scsi_device *sdev);
void pm8001_scan_start(struct Scsi_Host *shost);
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
int pm8001_queue_command(struct sas_task *task, const int num,
@@ -484,14 +633,92 @@ int pm8001_dev_found(struct domain_device *dev);
void pm8001_dev_gone(struct domain_device *dev);
int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev);
int pm8001_query_task(struct sas_task *task);
+void pm8001_open_reject_retry(
+ struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task_to_close,
+ struct pm8001_device *device_to_close);
int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
u32 mem_size, u32 align);
-
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha);
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+ struct inbound_queue_table *circularQ,
+ u32 opCode, void *payload, u32 responseQueue);
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
+ u16 messageSize, void **messagePtr);
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+ struct outbound_queue_table *circularQ, u8 bc);
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ,
+ void **messagePtr1, u8 *pBC);
+int pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state);
+int pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload);
+int pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+ void *fw_flash_updata_info, u32 tag);
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb,
+ struct pm8001_tmf_task *tmf);
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev,
+ u8 flag, u32 task_tag, u32 cmd_tag);
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+void pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd);
+void pm8001_work_fn(struct work_struct *work);
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha,
+ void *data, int handler);
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate);
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy, u8 *sas_addr);
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i);
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+struct sas_task *pm8001_alloc_task(void);
+void pm8001_task_done(struct sas_task *task);
+void pm8001_free_task(struct sas_task *task);
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id);
+int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
+
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf);
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf);
+ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
/* ctl shared API */
extern struct device_attribute *pm8001_host_attrs[];
+static inline void
+pm8001_ccb_task_free_done(struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task, struct pm8001_ccb_info *ccb,
+ u32 ccb_idx)
+{
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, ccb_idx);
+ smp_mb(); /*in order to force CPU ordering*/
+ spin_unlock(&pm8001_ha->lock);
+ task->task_done(task);
+ spin_lock(&pm8001_ha->lock);
+}
+
#endif
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
new file mode 100644
index 00000000000..d70587f9618
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -0,0 +1,4529 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 PMC-Sierra, Inc.,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm80xx_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+#define SMP_DIRECT 1
+#define SMP_INDIRECT 2
+
+
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value)
+{
+ u32 reg_val;
+ unsigned long start;
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, shift_value);
+ /* confirm the setting is written */
+ start = jiffies + HZ; /* 1 sec */
+ do {
+ reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER);
+ } while ((reg_val != shift_value) && time_before(jiffies, start));
+ if (reg_val != shift_value) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
+ " = 0x%x\n", reg_val));
+ return -1;
+ }
+ return 0;
+}
+
+void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset,
+ const void *destination,
+ u32 dw_count, u32 bus_base_number)
+{
+ u32 index, value, offset;
+ u32 *destination1;
+ destination1 = (u32 *)destination;
+
+ for (index = 0; index < dw_count; index += 4, destination1++) {
+ offset = (soffset + index / 4);
+ if (offset < (64 * 1024)) {
+ value = pm8001_cr32(pm8001_ha, bus_base_number, offset);
+ *destination1 = cpu_to_le32(value);
+ }
+ }
+ return;
+}
+
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr;
+ u32 accum_len , reg_val, index, *temp;
+ unsigned long start;
+ u8 *direct_data;
+ char *fatal_error_data = buf;
+
+ pm8001_ha->forensic_info.data_buf.direct_data = buf;
+ if (pm8001_ha->chip_id == chip_8001) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "Not supported for SPC controller");
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("forensic_info TYPE_NON_FATAL..............\n"));
+ direct_data = (u8 *)fatal_error_data;
+ pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
+ pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
+ pm8001_ha->forensic_info.data_buf.read_len = 0;
+
+ pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
+
+ /* start to get data */
+ /* Program the MEMBASE II Shifting Register with 0x00.*/
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ pm8001_ha->forensic_last_offset = 0;
+ pm8001_ha->forensic_fatal_step = 0;
+ pm8001_ha->fatal_bar_loc = 0;
+ }
+
+ /* Read until accum_len is retrived */
+ accum_len = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("accum_len 0x%x\n",
+ accum_len));
+ if (accum_len == 0xFFFFFFFF) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Possible PCI issue 0x%x not expected\n",
+ accum_len));
+ return -EIO;
+ }
+ if (accum_len == 0 || accum_len >= 0x100000) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 0xFFFFFFFF);
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr;
+ if (pm8001_ha->forensic_fatal_step == 0) {
+moreData:
+ if (pm8001_ha->forensic_info.data_buf.direct_data) {
+ /* Data is in bar, copy to host memory */
+ pm80xx_pci_mem_copy(pm8001_ha, pm8001_ha->fatal_bar_loc,
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr,
+ pm8001_ha->forensic_info.data_buf.direct_len ,
+ 1);
+ }
+ pm8001_ha->fatal_bar_loc +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_info.data_buf.direct_offset +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_last_offset +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_info.data_buf.read_len =
+ pm8001_ha->forensic_info.data_buf.direct_len;
+
+ if (pm8001_ha->forensic_last_offset >= accum_len) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 3);
+ for (index = 0; index < (SYSFS_OFFSET / 4); index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+
+ pm8001_ha->fatal_bar_loc = 0;
+ pm8001_ha->forensic_fatal_step = 1;
+ pm8001_ha->fatal_forensic_shift_offset = 0;
+ pm8001_ha->forensic_last_offset = 0;
+ return (char *)pm8001_ha->
+ forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ if (pm8001_ha->fatal_bar_loc < (64 * 1024)) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", 2);
+ for (index = 0; index < (SYSFS_OFFSET / 4); index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+ return (char *)pm8001_ha->
+ forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+
+ /* Increment the MEMBASE II Shifting Register value by 0x100.*/
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 2);
+ for (index = 0; index < 256; index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+ pm8001_ha->fatal_forensic_shift_offset += 0x100;
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ pm8001_ha->fatal_bar_loc = 0;
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ if (pm8001_ha->forensic_fatal_step == 1) {
+ pm8001_ha->fatal_forensic_shift_offset = 0;
+ /* Read 64K of the debug data. */
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ pm8001_mw32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE,
+ MPI_FATAL_EDUMP_HANDSHAKE_RDY);
+
+ /* Poll FDDHSHK until clear */
+ start = jiffies + (2 * HZ); /* 2 sec */
+
+ do {
+ reg_val = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE);
+ } while ((reg_val) && time_before(jiffies, start));
+
+ if (reg_val != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
+ " = 0x%x\n", reg_val));
+ return -EIO;
+ }
+
+ /* Read the next 64K of the debug data. */
+ pm8001_ha->forensic_fatal_step = 0;
+ if (pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_STATUS) !=
+ MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) {
+ pm8001_mw32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE, 0);
+ goto moreData;
+ } else {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", 4);
+ pm8001_ha->forensic_info.data_buf.read_len = 0xFFFFFFFF;
+ pm8001_ha->forensic_info.data_buf.direct_len = 0;
+ pm8001_ha->forensic_info.data_buf.direct_offset = 0;
+ pm8001_ha->forensic_info.data_buf.read_len = 0;
+ }
+ }
+
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+}
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature =
+ pm8001_mr32(address, MAIN_SIGNATURE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev =
+ pm8001_mr32(address, MAIN_INTERFACE_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev =
+ pm8001_mr32(address, MAIN_FW_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io =
+ pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl =
+ pm8001_mr32(address, MAIN_MAX_SGL_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag =
+ pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset =
+ pm8001_mr32(address, MAIN_GST_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset =
+ pm8001_mr32(address, MAIN_IBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset =
+ pm8001_mr32(address, MAIN_OBQ_OFFSET);
+
+ /* read Error Dump Offset and Length */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+
+ /* read GPIO LED settings from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping =
+ pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET);
+
+ /* read analog Setting offset from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset =
+ pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset =
+ pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
+ pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+ pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate =
+ pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt =
+ pm8001_mr32(address, GST_MSGUTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt =
+ pm8001_mr32(address, GST_IOPTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val =
+ pm8001_mr32(address, GST_GPIO_INPUT_VAL);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET0);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET1);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET2);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET3);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET4);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET5);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET6);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET7);
+}
+/**
+ * read_phy_attr_table - read the phy attribute table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->pspa_q_tbl_addr;
+ pm8001_ha->phy_attr_table.phystart1_16[0] =
+ pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[1] =
+ pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[2] =
+ pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[3] =
+ pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[4] =
+ pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[5] =
+ pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[6] =
+ pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[7] =
+ pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[8] =
+ pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[9] =
+ pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[10] =
+ pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[11] =
+ pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[12] =
+ pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[13] =
+ pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[14] =
+ pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[15] =
+ pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET);
+
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET);
+
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ u32 offset = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + IB_PIPCI_BAR)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ u32 offset = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + OB_CIPCI_BAR)));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ u32 offsetib, offsetob;
+ void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+ void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01;
+
+ /* Disable end to end CRC checking */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
+
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
+ pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
+ pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[IB + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr;
+ pm8001_ha->inbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[IB + i].total_len;
+ pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
+ pm8001_ha->memoryMap.region[CI + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].ci_virt =
+ pm8001_ha->memoryMap.region[CI + i].virt_ptr;
+ offsetib = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressib,
+ (offsetib + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(addressib, (offsetib + 0x18));
+ pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
+ pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
+ }
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
+ pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
+ pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[OB + i].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr;
+ pm8001_ha->outbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[OB + i].total_len;
+ pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
+ pm8001_ha->memoryMap.region[PI + i].phys_addr_lo;
+ /* interrupt vector based on oq */
+ pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24);
+ pm8001_ha->outbnd_q_tbl[i].pi_virt =
+ pm8001_ha->memoryMap.region[PI + i].virt_ptr;
+ offsetob = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressob,
+ offsetob + 0x14));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(addressob, (offsetob + 0x18));
+ pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
+ pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
+ }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size);
+ pm8001_mw32(address, MAIN_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+ pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
+ pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
+
+ /* SPCv specific */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF;
+ /* Set GPIOLED to 0x2 for LED indicator */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
+ pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
+
+ pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
+ pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ u16 offset = number * 0x20;
+ pm8001_mw32(address, offset + IB_PROPERITY_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ u16 offset = number * 0x24;
+ pm8001_mw32(address, offset + OB_PROPERITY_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+ pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+
+ /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is updated */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
+ /* wait until Inbound DoorBell Clear Register toggled */
+ if (IS_SPCV_12G(pm8001_ha->pdev)) {
+ max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+ } else {
+ max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ }
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_UPDATE;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count)
+ return -1;
+ /* check the MPI-State for initialization upto 100ms*/
+ max_wait_count = 100 * 1000;/* 100 msec */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ } while ((GST_MPI_STATE_INIT !=
+ (gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count));
+ if (!max_wait_count)
+ return -1;
+
+ /* check MPI Initialization error */
+ gst_len_mpistate = gst_len_mpistate >> 16;
+ if (0x0000 != gst_len_mpistate)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+ u32 max_wait_count;
+ u32 max_wait_time;
+ int ret = 0;
+
+ /* reset / PCIe ready */
+ max_wait_time = max_wait_count = 100 * 1000; /* 100 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while ((value == 0xFFFFFFFF) && (--max_wait_count));
+
+ /* check ila status */
+ max_wait_time = max_wait_count = 1000 * 1000; /* 1000 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_ILA_READY) !=
+ SCRATCH_PAD_ILA_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" ila ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check RAAE status */
+ max_wait_time = max_wait_count = 1800 * 1000; /* 1800 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_RAAE_READY) !=
+ SCRATCH_PAD_RAAE_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" raae ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check iop0 status */
+ max_wait_time = max_wait_count = 600 * 1000; /* 600 milli sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) &&
+ (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" iop0 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+
+ /* check iop1 status only for 16 port controllers */
+ if ((pm8001_ha->chip_id != chip_8008) &&
+ (pm8001_ha->chip_id != chip_8009)) {
+ /* 200 milli sec */
+ max_wait_time = max_wait_count = 200 * 1000;
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & SCRATCH_PAD_IOP1_READY) !=
+ SCRATCH_PAD_IOP1_READY) && (--max_wait_count));
+ if (!max_wait_count)
+ ret = -1;
+ else {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "iop1 ready status in %d millisec\n",
+ (max_wait_time - max_wait_count)));
+ }
+ }
+
+ return ret;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *base_addr;
+ u32 value;
+ u32 offset;
+ u32 pcibar;
+ u32 pcilogic;
+
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n",
+ offset, value));
+ pcilogic = (value & 0xFC000000) >> 26;
+ pcibar = get_pci_bar_index(pcilogic);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
+ pm8001_ha->main_cfg_tbl_addr = base_addr =
+ pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+ pm8001_ha->general_stat_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) &
+ 0xFFFFFF);
+ pm8001_ha->inbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) &
+ 0xFFFFFF);
+ pm8001_ha->outbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) &
+ 0xFFFFFF);
+ pm8001_ha->ivt_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) &
+ 0xFFFFFF);
+ pm8001_ha->pspa_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) &
+ 0xFFFFFF);
+ pm8001_ha->fatal_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) &
+ 0xFFFFFF);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GST OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x18)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("INBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("OBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x20)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("IVT OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PSPA OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x90)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - main cfg %p general status %p\n",
+ pm8001_ha->main_cfg_tbl_addr,
+ pm8001_ha->general_stat_tbl_addr));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - inbnd %p obnd %p\n",
+ pm8001_ha->inbnd_q_tbl_addr,
+ pm8001_ha->outbnd_q_tbl_addr));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("addr - pspa %p ivt %p\n",
+ pm8001_ha->pspa_q_tbl_addr,
+ pm8001_ha->ivt_tbl_addr));
+}
+
+/**
+ * pm80xx_set_thermal_config - support the thermal configuration
+ * @pm8001_ha: our hba card information.
+ */
+int
+pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ struct inbound_queue_table *circularQ;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
+ (THERMAL_ENABLE << 8) | THERMAL_OP_CODE;
+ payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+ return rc;
+
+}
+
+/**
+* pm80xx_set_sas_protocol_timer_config - support the SAS Protocol
+* Timer configuration page
+* @pm8001_ha: our hba card information.
+*/
+static int
+pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ struct inbound_queue_table *circularQ;
+ SASProtocolTimerConfig_t SASConfigPage;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+
+ SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE;
+ SASConfigPage.MST_MSI = 3 << 15;
+ SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO;
+ SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
+ SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME;
+
+ if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
+ SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
+
+
+ SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) |
+ SAS_OPNRJT_RTRY_INTVL;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16)
+ | SAS_COPNRJT_RTRY_TMO;
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16)
+ | SAS_COPNRJT_RTRY_THR;
+ SASConfigPage.MAX_AIP = SAS_MAX_AIP;
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.pageCode "
+ "0x%08x\n", SASConfigPage.pageCode));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.MST_MSI "
+ " 0x%08x\n", SASConfigPage.MST_MSI));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
+ " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_FRM_TMO "
+ " 0x%08x\n", SASConfigPage.STP_FRM_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.STP_IDLE_TMO "
+ " 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
+ " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
+ " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
+ " 0x%08x\n", SASConfigPage.MAX_AIP));
+
+ memcpy(&payload.cfg_pg, &SASConfigPage,
+ sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm80xx_get_encrypt_info - Check for encryption
+ * @pm8001_ha: our hba card information.
+ */
+static int
+pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 scratch3_value;
+ int ret;
+
+ /* Read encryption status from SCRATCH PAD 3 */
+ scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+
+ if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_READY) {
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ pm8001_ha->encrypt_info.status = 0;
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X."
+ "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
+ SCRATCH_PAD3_ENC_DISABLED) {
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
+ scratch3_value));
+ pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
+ pm8001_ha->encrypt_info.cipher_mode = 0;
+ pm8001_ha->encrypt_info.sec_mode = 0;
+ return 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_DIS_ERR) {
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X."
+ "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = -1;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_ENA_ERR) {
+
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X."
+ "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status));
+ ret = -1;
+ }
+ return ret;
+}
+
+/**
+ * pm80xx_encrypt_update - update flash with encryption informtion
+ * @pm8001_ha: our hba card information.
+ */
+static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
+{
+ struct kek_mgmt_req payload;
+ struct inbound_queue_table *circularQ;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_KEK_MANAGEMENT;
+
+ memset(&payload, 0, sizeof(struct kek_mgmt_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ /* Currently only one key is used. New KEK index is 1.
+ * Current KEK index is 1. Store KEK to NVRAM is 1.
+ */
+ payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
+ KEK_MGMT_SUBOP_KEYCARDUPDATE);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+ int ret;
+ u8 i = 0;
+
+ /* check the firmware status */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Firmware is not ready!\n"));
+ return -EBUSY;
+ }
+
+ /* Initialize pci space address eg: mpi offset */
+ init_pci_device_addresses(pm8001_ha);
+ init_default_table_values(pm8001_ha);
+ read_main_config_table(pm8001_ha);
+ read_general_status_table(pm8001_ha);
+ read_inbnd_queue_table(pm8001_ha);
+ read_outbnd_queue_table(pm8001_ha);
+ read_phy_attr_table(pm8001_ha);
+
+ /* update main config table ,inbound table and outbound table */
+ update_main_config_table(pm8001_ha);
+ for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++)
+ update_inbnd_queue_table(pm8001_ha, i);
+ for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++)
+ update_outbnd_queue_table(pm8001_ha, i);
+
+ /* notify firmware update finished and check initialization status */
+ if (0 == mpi_init_check(pm8001_ha)) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MPI initialize successful!\n"));
+ } else
+ return -EBUSY;
+
+ /* send SAS protocol timer configuration page to FW */
+ ret = pm80xx_set_sas_protocol_timer_config(pm8001_ha);
+
+ /* Check for encryption */
+ if (pm8001_ha->chip->encrypt) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Checking for encryption\n"));
+ ret = pm80xx_get_encrypt_info(pm8001_ha);
+ if (ret == -1) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Encryption error !!\n"));
+ if (pm8001_ha->encrypt_info.status == 0x81) {
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled with error."
+ "Saving encryption key to flash\n"));
+ pm80xx_encrypt_update(pm8001_ha);
+ }
+ }
+ }
+ return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ init_pci_device_addresses(pm8001_ha);
+ /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is stop */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET);
+
+ /* wait until Inbound DoorBell Clear Register toggled */
+ if (IS_SPCV_12G(pm8001_ha->pdev)) {
+ max_wait_count = 4 * 1000 * 1000;/* 4 sec */
+ } else {
+ max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ }
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_RESET;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:IBDB value/=%x\n", value));
+ return -1;
+ }
+
+ /* check the MPI-State for termination in progress */
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_UNINIT ==
+ (gst_len_mpistate & GST_MPI_STATE_MASK))
+ break;
+ } while (--max_wait_count);
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK));
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+
+static int
+pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regval;
+ u32 bootloader_state;
+ u32 ibutton0, ibutton1;
+
+ /* Check if MPI is in ready state to reset */
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MPI state is not ready\n"));
+ return -1;
+ }
+
+ /* checked for reset register normal state; 0x0 */
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("reset register before write : 0x%x\n", regval));
+
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
+ mdelay(500);
+
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("reset register after write 0x%x\n", regval));
+
+ if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
+ SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" soft reset successful [regval: 0x%x]\n",
+ regval));
+ } else {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" soft reset failed [regval: 0x%x]\n",
+ regval));
+
+ /* check bootloader is successfully executed or in HDA mode */
+ bootloader_state =
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+ SCRATCH_PAD1_BOOTSTATE_MASK;
+
+ if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode SEEPROM\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode Bootstrap Pin\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state - HDA mode soft reset\n"));
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Bootloader state-HDA mode critical error\n"));
+ }
+ return -EBUSY;
+ }
+
+ /* check the firmware status after reset */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Firmware is not ready!\n"));
+ /* check iButton feature support for motherboard controller */
+ if (pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ADAPTEC2 &&
+ pm8001_ha->pdev->subsystem_vendor != 0) {
+ ibutton0 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_6);
+ ibutton1 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_HOST_SCRATCH_PAD_7);
+ if (!ibutton0 && !ibutton1) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("iButton Feature is"
+ " not Available!!!\n"));
+ return -EBUSY;
+ }
+ if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("CRC Check for iButton"
+ " Feature Failed!!!\n"));
+ return -EBUSY;
+ }
+ }
+ }
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SPCv soft reset Complete\n"));
+ return 0;
+}
+
+static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i;
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset start\n"));
+
+ /* do SPCv chip reset. */
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SPC soft reset Complete\n"));
+
+ /* Check this ..whether delay is required or no */
+ /* delay 10 usec */
+ udelay(10);
+
+ /* wait for 20 msec until the firmware gets reloaded */
+ i = 20;
+ do {
+ mdelay(1);
+ } while ((--i) != 0);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ u32 mask;
+ mask = (u32)(1 << vec);
+
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ u32 mask;
+ if (vec == 0xFF)
+ mask = 0xFFFFFFFF;
+ else
+ mask = (u32)(1 << vec);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_disable(pm8001_ha);
+}
+
+static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct task_abort_req task_abort;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_ABORT;
+ int ret;
+
+ if (!pm8001_ha_dev) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
+ return;
+ }
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
+ "allocate task\n"));
+ return;
+ }
+
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res)
+ return;
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&task_abort, 0, sizeof(task_abort));
+ task_abort.abort_all = cpu_to_le32(1);
+ task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ task_abort.tag = cpu_to_le32(ccb_tag);
+
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0);
+
+}
+
+static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_ha_dev)
+{
+ struct sata_start_req sata_cmd;
+ int res;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+ struct host_to_dev_fis fis;
+ struct domain_device *dev;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+ task = sas_alloc_slow_task(GFP_ATOMIC);
+
+ if (!task) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate task !!!\n"));
+ return;
+ }
+ task->task_done = pm8001_task_done;
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("cannot allocate tag !!!\n"));
+ return;
+ }
+
+ /* allocate domain device by ourselves as libsas
+ * is not going to provide any
+ */
+ dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC);
+ if (!dev) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Domain device cannot be allocated\n"));
+ sas_free_task(task);
+ return;
+ } else {
+ task->dev = dev;
+ task->dev->lldd_dev = pm8001_ha_dev;
+ }
+
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_ha_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+ pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
+ pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
+
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ /* construct read log FIS */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.fis_type = 0x27;
+ fis.flags = 0x80;
+ fis.command = ATA_CMD_READ_LOG_EXT;
+ fis.lbal = 0x10;
+ fis.sector_count = 0x1;
+
+ sata_cmd.tag = cpu_to_le32(ccb_tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+ memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
+
+ res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
+
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 param;
+ u32 tag;
+ struct ssp_completion_resp *psspPayload;
+ struct task_status_struct *ts;
+ struct ssp_response_iu *iu;
+ struct pm8001_device *pm8001_dev;
+ psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psspPayload->status);
+ tag = le32_to_cpu(psspPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ if ((status == IO_ABORTED) && ccb->open_retry) {
+ /* Being completed by another */
+ ccb->open_retry = 0;
+ return;
+ }
+ pm8001_dev = ccb->device;
+ param = le32_to_cpu(psspPayload->param);
+ t = ccb->task;
+
+ if (status && status != IO_UNDERFLOW)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW))
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive"
+ ":%016llx", SAS_ADDR(t->dev->sas_addr)));
+
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_SUCCESS ,param = 0x%x\n",
+ param));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ } else {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ iu = &psspPayload->ssp_resp_iu;
+ sas_ssp_task_response(pm8001_ha->dev, t, iu);
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_UNDERFLOW:
+ /* SSP Completion with error */
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n",
+ param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ /* Force the midlayer to retry */
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_TM_TAG_NOT_FOUND:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ }
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("scsi_status = 0x%x\n ",
+ psspPayload->ssp_resp_iu.status));
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with io_status 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct ssp_event_resp *psspPayload =
+ (struct ssp_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psspPayload->event);
+ u32 tag = le32_to_cpu(psspPayload->tag);
+ u32 port_id = le32_to_cpu(psspPayload->port_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", event));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+ return;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+ return;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ return;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with event 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ u32 param;
+ u32 status;
+ u32 tag;
+ int i, j;
+ u8 sata_addr_low[4];
+ u32 temp_sata_addr_low, temp_sata_addr_hi;
+ u8 sata_addr_hi[4];
+ struct sata_completion_resp *psataPayload;
+ struct task_status_struct *ts;
+ struct ata_task_resp *resp ;
+ u32 *sata_resp;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags;
+
+ psataPayload = (struct sata_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psataPayload->status);
+ tag = le32_to_cpu(psataPayload->tag);
+
+ if (!tag) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("tag null\n"));
+ return;
+ }
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psataPayload->param);
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("ccb null\n"));
+ return;
+ }
+
+ if (t) {
+ if (t->dev && (t->dev->lldd_dev))
+ pm8001_dev = t->dev->lldd_dev;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task null\n"));
+ return;
+ }
+
+ if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
+ && unlikely(!t || !t->lldd_task || !t->dev)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task or dev null\n"));
+ return;
+ }
+
+ ts = &t->task_status;
+ if (!ts) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("ts null\n"));
+ return;
+ }
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW)) {
+ if (!((t->dev->parent) &&
+ (DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
+ for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++)
+ sata_addr_low[i] = pm8001_ha->sas_addr[j];
+ for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++)
+ sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+ memcpy(&temp_sata_addr_low, sata_addr_low,
+ sizeof(sata_addr_low));
+ memcpy(&temp_sata_addr_hi, sata_addr_hi,
+ sizeof(sata_addr_hi));
+ temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+ |((temp_sata_addr_hi << 8) &
+ 0xff0000) |
+ ((temp_sata_addr_hi >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_hi << 24) &
+ 0xff000000));
+ temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+ & 0xff) |
+ ((temp_sata_addr_low << 8)
+ & 0xff0000) |
+ ((temp_sata_addr_low >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_low << 24)
+ & 0xff000000)) +
+ pm8001_dev->attached_phy +
+ 0x10);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive:"
+ "%08x%08x", temp_sata_addr_hi,
+ temp_sata_addr_low));
+
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SAS Address of IO Failure Drive:"
+ "%016llx", SAS_ADDR(t->dev->sas_addr)));
+ }
+ }
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ /* check if response is for SEND READ LOG */
+ if (pm8001_dev &&
+ (pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
+ /* set new bit for abort_all */
+ pm8001_dev->id |= NCQ_ABORT_ALL_FLAG;
+ /* clear bit for read log */
+ pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF;
+ pm80xx_send_abort_all(pm8001_ha, pm8001_dev);
+ /* Free the tag */
+ pm8001_tag_free(pm8001_ha, tag);
+ sas_free_task(t);
+ return;
+ }
+ } else {
+ u8 len;
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+ param));
+ sata_resp = &psataPayload->sata_resp[0];
+ resp = (struct ata_task_resp *)ts->buf;
+ if (t->ata_task.dma_xfer == 0 &&
+ t->data_dir == PCI_DMA_FROMDEVICE) {
+ len = sizeof(struct pio_setup_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("PIO read len = %d\n", len));
+ } else if (t->ata_task.use_ncq) {
+ len = sizeof(struct set_dev_bits_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("FPDMA len = %d\n", len));
+ } else {
+ len = sizeof(struct dev_to_host_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("other len = %d\n", len));
+ }
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = len;
+ memcpy(&resp->ending_fis[0], sata_resp, len);
+ ts->buf_valid_size = sizeof(*resp);
+ } else
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("response to large\n"));
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ /* following cases are to do cases */
+ case IO_UNDERFLOW:
+ /* SATA Completion with error */
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_IN_ERROR);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct sata_event_resp *psataPayload =
+ (struct sata_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psataPayload->event);
+ u32 tag = le32_to_cpu(psataPayload->tag);
+ u32 port_id = le32_to_cpu(psataPayload->port_id);
+ u32 dev_id = le32_to_cpu(psataPayload->device_id);
+ unsigned long flags;
+
+ ccb = &pm8001_ha->ccb_info[tag];
+
+ if (ccb) {
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ } else {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("No CCB !!!. returning\n"));
+ return;
+ }
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SATA EVENT 0x%x\n", event));
+
+ /* Check if this is NCQ error */
+ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+ /* find device using device id */
+ pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+ /* send read log extension */
+ if (pm8001_dev)
+ pm80xx_send_read_log(pm8001_ha, pm8001_dev);
+ return;
+ }
+
+ if (unlikely(!t || !t->lldd_task || !t->dev)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task or dev null\n"));
+ return;
+ }
+
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_PEER_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ break;
+ case IO_XFER_PIO_SETUP_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_DMA_ACTIVATE_TIMEOUT:
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, t, ccb, tag);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 param, i;
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 tag;
+ struct smp_completion_resp *psmpPayload;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+ char *pdma_respaddr = NULL;
+
+ psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psmpPayload->status);
+ tag = le32_to_cpu(psmpPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psmpPayload->param);
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("smp IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ switch (status) {
+
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("DIRECT RESPONSE Length:%d\n",
+ param));
+ pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64
+ ((u64)sg_dma_address
+ (&t->smp_task.smp_resp))));
+ for (i = 0; i < param; i++) {
+ *(pdma_respaddr+i) = psmpPayload->_r_a[i];
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
+ i, *(pdma_respaddr+i),
+ psmpPayload->_r_a[i]));
+ }
+ }
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_ERROR_HW_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_BUSY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(\
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_RX_FRAME:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_ERROR_INTERNAL_SMP_RESOURCE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ /* not allowed case. Therefore, return failed status */
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "task 0x%p done with io_status 0x%x resp 0x%x"
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/**
+ * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+ struct hw_event_ack_req payload;
+ u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+ struct inbound_queue_table *circularQ;
+
+ memset((u8 *)&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+ payload.tag = cpu_to_le32(1);
+ payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+ ((phyId & 0xFF) << 24) | (port_id & 0xFF));
+ payload.param0 = cpu_to_le32(param0);
+ payload.param1 = cpu_to_le32(param1);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "portid:%d; phyid:%d; linkrate:%d; "
+ "portstate:%x; devicetype:%x\n",
+ port_id, phy_id, link_rate, portstate, deviceType));
+
+ switch (deviceType) {
+ case SAS_PHY_UNUSED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("device type no device.\n"));
+ break;
+ case SAS_END_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+ pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("expander device.\n"));
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("fanout expander device.\n"));
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unknown device type(%x)\n", deviceType));
+ break;
+ }
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = deviceType;
+ phy->phy_attached = 1;
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+ sizeof(struct sas_identify_frame)-4);
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ mdelay(200);/*delay a moment to wait disk to spinup*/
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "port id %d, phy id %d link_rate %d portstate 0x%x\n",
+ port_id, phy_id, link_rate, portstate));
+
+ port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+ sizeof(struct dev_to_host_fis));
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->identify.device_type = SAS_SATA_DEV;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ port->port_state = portstate;
+ phy->phy_type = 0;
+ phy->identify.device_type = 0;
+ phy->phy_attached = 0;
+ memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
+ switch (portstate) {
+ case PORT_VALID:
+ break;
+ case PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" PortInvalid portID %d\n", port_id));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ case PORT_IN_RESET:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Port In Reset portID %d\n", port_id));
+ break;
+ case PORT_NOT_ESTABLISHED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ port->port_attached = 0;
+ break;
+ case PORT_LOSTCOMM:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ default:
+ port->port_attached = 0;
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and(default) = 0x%x\n",
+ portstate));
+ break;
+
+ }
+}
+
+static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_start_resp *pPayload =
+ (struct phy_start_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phy_id =
+ le32_to_cpu(pPayload->phyid);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
+ status, phy_id));
+ if (status == 0) {
+ phy->phy_state = 1;
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ complete(phy->enable_completion);
+ }
+ return 0;
+
+}
+
+/**
+ * mpi_thermal_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct thermal_hw_event *pPayload =
+ (struct thermal_hw_event *)(piomb + 4);
+
+ u32 thermal_event = le32_to_cpu(pPayload->thermal_event);
+ u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
+
+ if (thermal_event & 0x40) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Local high temperature violated!\n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Measured local high temperature %d\n",
+ ((rht_lht & 0xFF00) >> 8)));
+ }
+ if (thermal_event & 0x10) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Remote high temperature violated!\n"));
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Thermal Event: Measured remote high temperature %d\n",
+ ((rht_lht & 0xFF000000) >> 24)));
+ }
+ return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ unsigned long flags;
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u16 eventType =
+ (u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
+ u8 status =
+ (u8)((lr_status_evt_portid & 0x0F000000) >> 24);
+
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
+ port_id, phy_id, eventType, status));
+
+ switch (eventType) {
+
+ case HW_EVENT_SAS_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
+ hw_event_sas_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
+ hw_event_sata_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_SPINUP_HOLD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ break;
+ case HW_EVENT_PHY_DOWN:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_DOWN\n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ phy->phy_attached = 0;
+ phy->phy_state = 0;
+ hw_event_phy_down(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ /* the broadcast change primitive received, tell the LIBSAS this event
+ to revalidate the sas domain*/
+ case HW_EVENT_BROADCAST_CHANGE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+ port_id, phy_id, 1, 0);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_PHY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+ sas_phy_disconnected(&phy->sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ break;
+ case HW_EVENT_BROADCAST_EXP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_LINK_ERR_INVALID_DWORD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_CODE_VIOLATION,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_MALFUNCTION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+ break;
+ case HW_EVENT_BROADCAST_SES:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_INBOUND_CRC_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_INBOUND_CRC_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_HARD_RESET_RECEIVED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+ sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+ break;
+ case HW_EVENT_ID_FRAME_TIMEOUT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RESET_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_PORT_RECOVERY_TIMER_TMO,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVER:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
+ break;
+ case HW_EVENT_PORT_RESET_COMPLETE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
+ break;
+ case EVENT_BROADCAST_ASYNCH_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Unknown event type 0x%x\n", eventType));
+ break;
+ }
+ return 0;
+}
+
+/**
+ * mpi_phy_stop_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_stop_resp *pPayload =
+ (struct phy_stop_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phyid =
+ le32_to_cpu(pPayload->phyid);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("phy:0x%x status:0x%x\n",
+ phyid, status));
+ if (status == 0)
+ phy->phy_state = 0;
+ return 0;
+}
+
+/**
+ * mpi_set_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct set_ctrl_cfg_resp *pPayload =
+ (struct set_ctrl_cfg_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
+ status, err_qlfr_pgcd));
+
+ return 0;
+}
+
+/**
+ * mpi_get_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_get_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_flash_op_ext_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * mpi_set_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ u8 page_code;
+ struct set_phy_profile_resp *pPayload =
+ (struct set_phy_profile_resp *)(piomb + 4);
+ u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid);
+ u32 status = le32_to_cpu(pPayload->status);
+
+ page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
+ if (status) {
+ /* status is FAILED */
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("PhyProfile command failed with status "
+ "0x%08X \n", status));
+ return -1;
+ } else {
+ if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Invalid page code 0x%X\n",
+ page_code));
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * mpi_kek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4);
+
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
+ u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
+ status, kidx_new_curr_ksop, err_qlfr));
+
+ return 0;
+}
+
+/**
+ * mpi_dek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * ssp_coalesced_comp_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" pm80xx_addition_functionality\n"));
+
+ return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ __le32 pHeader = *(__le32 *)piomb;
+ u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF);
+
+ switch (opc) {
+ case OPC_OUB_ECHO:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
+ break;
+ case OPC_OUB_HW_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_HW_EVENT\n"));
+ mpi_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_THERM_HW_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_THERMAL_EVENT\n"));
+ mpi_thermal_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_COMP\n"));
+ mpi_ssp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SMP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_COMP\n"));
+ mpi_smp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_LOCAL_PHY_CNTRL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+ pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_REGIST:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_REGIST\n"));
+ pm8001_mpi_reg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEREG_DEV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unregister the device\n"));
+ pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEV_HANDLE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
+ break;
+ case OPC_OUB_SATA_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_COMP\n"));
+ mpi_sata_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_EVENT\n"));
+ mpi_sata_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+ mpi_ssp_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_HANDLE_ARRIV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_SSP_RECV_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_FW_FLASH_UPDATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+ pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GPIO_RESPONSE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+ break;
+ case OPC_OUB_GPIO_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+ break;
+ case OPC_OUB_GENERAL_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+ pm8001_mpi_general_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SAS_DIAG_MODE_START_END:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+ break;
+ case OPC_OUB_SAS_DIAG_EXECUTE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+ break;
+ case OPC_OUB_GET_TIME_STAMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+ break;
+ case OPC_OUB_SAS_HW_EVENT_ACK:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+ break;
+ case OPC_OUB_PORT_CONTROL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+ break;
+ case OPC_OUB_SMP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+ pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+ pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+ break;
+ case OPC_OUB_SET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+ pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+ break;
+ case OPC_OUB_SET_DEV_INFO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+ break;
+ /* spcv specifc commands */
+ case OPC_OUB_PHY_START_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_PHY_START_RESP opcode:%x\n", opc));
+ mpi_phy_start_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_PHY_STOP_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc));
+ mpi_phy_stop_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_CONTROLLER_CONFIG:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ mpi_set_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_CONTROLLER_CONFIG:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc));
+ mpi_get_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_PHY_PROFILE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc));
+ mpi_get_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_FLASH_OP_EXT:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc));
+ mpi_flash_op_ext_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_PHY_PROFILE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc));
+ mpi_set_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_KEK_MANAGEMENT_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ mpi_kek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEK_MANAGEMENT_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc));
+ mpi_dek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COALESCED_COMP_RESP:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc));
+ ssp_coalesced_comp_resp(pm8001_ha, piomb);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
+ "Unknown outbound Queue IOMB OPC = 0x%x\n", opc));
+ break;
+ }
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ struct outbound_queue_table *circularQ;
+ void *pMsg1 = NULL;
+ u8 uninitialized_var(bc);
+ u32 ret = MPI_IO_STATUS_FAIL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+ do {
+ ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ if (MPI_IO_STATUS_SUCCESS == ret) {
+ /* process the outbound message */
+ process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+ /* free the message from the outbound circular buffer */
+ pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+ circularQ, bc);
+ }
+ if (MPI_IO_STATUS_BUSY == ret) {
+ /* Update the producer index from SPC */
+ circularQ->producer_index =
+ cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+ if (le32_to_cpu(circularQ->producer_index) ==
+ circularQ->consumer_idx)
+ /* OQ is empty */
+ break;
+ }
+ } while (1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+ [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+ [PCI_DMA_TODEVICE] = DATA_DIR_OUT,/* OUTBOUND */
+ [PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */
+ [PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */
+};
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag,
+ struct smp_req *psmp_cmd, int mode, int length)
+{
+ psmp_cmd->tag = hTag;
+ psmp_cmd->device_id = cpu_to_le32(deviceID);
+ if (mode == SMP_DIRECT) {
+ length = length - 4; /* subtract crc */
+ psmp_cmd->len_ip_ir = cpu_to_le32(length << 16);
+ } else {
+ psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+ }
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ int elem, rc;
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len;
+ struct smp_req smp_cmd;
+ u32 opc;
+ struct inbound_queue_table *circularQ;
+ char *preq_dma_addr = NULL;
+ __le64 tmp_addr;
+ u32 i, length;
+
+ memset(&smp_cmd, 0, sizeof(smp_cmd));
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ opc = OPC_INB_SMP_REQUEST;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+
+ length = sg_req->length;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP Frame Length %d\n", sg_req->length));
+ if (!(length - 8))
+ pm8001_ha->smp_exp_mode = SMP_DIRECT;
+ else
+ pm8001_ha->smp_exp_mode = SMP_INDIRECT;
+
+
+ tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ preq_dma_addr = (char *)phys_to_virt(tmp_addr);
+
+ /* INDIRECT MODE command settings. Use DMA */
+ if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP REQUEST INDIRECT MODE\n"));
+ /* for SPCv indirect mode. Place the top 4 bytes of
+ * SMP Request header here. */
+ for (i = 0; i < 4; i++)
+ smp_cmd.smp_req16[i] = *(preq_dma_addr + i);
+ /* exclude top 4 bytes for SMP req header */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req) + 4);
+ /* exclude 4 bytes for SMP req header and CRC */
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32((u32)sg_dma_len
+ (&task->smp_task.smp_resp)-4);
+ } else { /* DIRECT MODE */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req));
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32
+ ((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+ }
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SMP REQUEST DIRECT MODE\n"));
+ for (i = 0; i < length; i++)
+ if (i < 16) {
+ smp_cmd.smp_req16[i] = *(preq_dma_addr+i);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req16[i],
+ *(preq_dma_addr)));
+ } else {
+ smp_cmd.smp_req[i] = *(preq_dma_addr+i);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req[i],
+ *(preq_dma_addr)));
+ }
+ }
+
+ build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
+ &smp_cmd, pm8001_ha->smp_exp_mode, length);
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd, 0);
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+err_out:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ return rc;
+}
+
+static int check_enc_sas_cmd(struct sas_task *task)
+{
+ u8 cmd = task->ssp_task.cmd->cmnd[0];
+
+ if (cmd == READ_10 || cmd == WRITE_10 || cmd == WRITE_VERIFY)
+ return 1;
+ else
+ return 0;
+}
+
+static int check_enc_sat_cmd(struct sas_task *task)
+{
+ int ret = 0;
+ switch (task->ata_task.fis.command) {
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_PIO_WRITE:
+ case ATA_CMD_PIO_WRITE_EXT:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+/**
+ * pm80xx_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct ssp_ini_io_start_req ssp_cmd;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ u64 phys_addr, start_addr, end_addr;
+ u32 end_addr_high, end_addr_low;
+ struct inbound_queue_table *circularQ;
+ u32 q_index;
+ u32 opc = OPC_INB_SSPINIIOSTART;
+ memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+ memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+ /* data address domain added for spcv; set to 0 by host,
+ * used internally by controller
+ * 0 for SAS 1.1 and SAS 2.0 compatible TLR
+ */
+ ssp_cmd.dad_dir_m_tlr =
+ cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);
+ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ ssp_cmd.tag = cpu_to_le32(tag);
+ if (task->ssp_task.enable_first_burst)
+ ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+ q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+ circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
+ task->ssp_task.cmd->cmnd[0]));
+ opc = OPC_INB_SSP_INI_DIF_ENC_IO;
+ /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
+ ssp_cmd.dad_dir_m_tlr = cpu_to_le32
+ ((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+ /* Check 4G Boundary */
+ start_addr = cpu_to_le64(dma_addr);
+ end_addr = (start_addr + ssp_cmd.enc_len) - 1;
+ end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+ end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ if (end_addr_high != ssp_cmd.enc_addr_high) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("The sg list address "
+ "start_addr=0x%016llx data_len=0x%x "
+ "end_addr_high=0x%08x end_addr_low="
+ "0x%08x has crossed 4G boundary\n",
+ start_addr, ssp_cmd.enc_len,
+ end_addr_high, end_addr_low));
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info,
+ buf_prd[0]);
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ }
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.enc_addr_low = 0;
+ ssp_cmd.enc_addr_high = 0;
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+ }
+ /* XTS mode. All other fields are 0 */
+ ssp_cmd.key_cmode = 0x6 << 4;
+ /* set tweak values. Should be the start lba */
+ ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
+ (task->ssp_task.cmd->cmnd[3] << 16) |
+ (task->ssp_task.cmd->cmnd[4] << 8) |
+ (task->ssp_task.cmd->cmnd[5]));
+ } else {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Sending Normal SAS command 0x%x inb q %x\n",
+ task->ssp_task.cmd->cmnd[0], q_index));
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ ssp_cmd.addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ /* Check 4G Boundary */
+ start_addr = cpu_to_le64(dma_addr);
+ end_addr = (start_addr + ssp_cmd.len) - 1;
+ end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+ end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ if (end_addr_high != ssp_cmd.addr_high) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("The sg list address "
+ "start_addr=0x%016llx data_len=0x%x "
+ "end_addr_high=0x%08x end_addr_low="
+ "0x%08x has crossed 4G boundary\n",
+ start_addr, ssp_cmd.len,
+ end_addr_high, end_addr_low));
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info,
+ buf_prd[0]);
+ ssp_cmd.addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ }
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.addr_low = 0;
+ ssp_cmd.addr_high = 0;
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ }
+ }
+ q_index = (u32) (pm8001_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+ &ssp_cmd, q_index);
+ return ret;
+}
+
+static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ u32 q_index;
+ struct sata_start_req sata_cmd;
+ u32 hdr_tag, ncg_tag = 0;
+ u64 phys_addr, start_addr, end_addr;
+ u32 end_addr_high, end_addr_low;
+ u32 ATAP = 0x0;
+ u32 dir;
+ struct inbound_queue_table *circularQ;
+ unsigned long flags;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_INB_NUM;
+ circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
+
+ if (task->data_dir == PCI_DMA_NONE) {
+ ATAP = 0x04; /* no data*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
+ } else if (likely(!task->ata_task.device_control_reg_update)) {
+ if (task->ata_task.dma_xfer) {
+ ATAP = 0x06; /* DMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
+ } else {
+ ATAP = 0x05; /* PIO*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
+ }
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+ ATAP = 0x07; /* FPDMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
+ }
+ }
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+ ncg_tag = hdr_tag;
+ }
+ dir = data_dir_flags[task->data_dir] << 8;
+ sata_cmd.tag = cpu_to_le32(tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+
+ sata_cmd.sata_fis = task->ata_task.fis;
+ if (likely(!task->ata_task.device_control_reg_update))
+ sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+ sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
+ sata_cmd.sata_fis.command));
+ opc = OPC_INB_SATA_DIF_ENC_IO;
+
+ /* set encryption bit */
+ sata_cmd.ncqtag_atap_dir_m_dad =
+ cpu_to_le32(((ncg_tag & 0xff)<<16)|
+ ((ATAP & 0x3f) << 10) | 0x20 | dir);
+ /* dad (bit 0-1) is 0 */
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
+ sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+ sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
+ sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+ /* Check 4G Boundary */
+ start_addr = cpu_to_le64(dma_addr);
+ end_addr = (start_addr + sata_cmd.enc_len) - 1;
+ end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+ end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ if (end_addr_high != sata_cmd.enc_addr_high) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("The sg list address "
+ "start_addr=0x%016llx data_len=0x%x "
+ "end_addr_high=0x%08x end_addr_low"
+ "=0x%08x has crossed 4G boundary\n",
+ start_addr, sata_cmd.enc_len,
+ end_addr_high, end_addr_low));
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info,
+ buf_prd[0]);
+ sata_cmd.enc_addr_low =
+ lower_32_bits(phys_addr);
+ sata_cmd.enc_addr_high =
+ upper_32_bits(phys_addr);
+ sata_cmd.enc_esgl =
+ cpu_to_le32(1 << 31);
+ }
+ } else if (task->num_scatter == 0) {
+ sata_cmd.enc_addr_low = 0;
+ sata_cmd.enc_addr_high = 0;
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+ }
+ /* XTS mode. All other fields are 0 */
+ sata_cmd.key_index_mode = 0x6 << 4;
+ /* set tweak values. Should be the start lba */
+ sata_cmd.twk_val0 =
+ cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
+ (sata_cmd.sata_fis.lbah << 16) |
+ (sata_cmd.sata_fis.lbam << 8) |
+ (sata_cmd.sata_fis.lbal));
+ sata_cmd.twk_val1 =
+ cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
+ (sata_cmd.sata_fis.lbam_exp));
+ } else {
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk(
+ "Sending Normal SATA command 0x%x inb %x\n",
+ sata_cmd.sata_fis.command, q_index));
+ /* dad (bit 0-1) is 0 */
+ sata_cmd.ncqtag_atap_dir_m_dad =
+ cpu_to_le32(((ncg_tag & 0xff)<<16) |
+ ((ATAP & 0x3f) << 10) | dir);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]);
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ sata_cmd.addr_low = lower_32_bits(dma_addr);
+ sata_cmd.addr_high = upper_32_bits(dma_addr);
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ /* Check 4G Boundary */
+ start_addr = cpu_to_le64(dma_addr);
+ end_addr = (start_addr + sata_cmd.len) - 1;
+ end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
+ end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ if (end_addr_high != sata_cmd.addr_high) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("The sg list address "
+ "start_addr=0x%016llx data_len=0x%x"
+ "end_addr_high=0x%08x end_addr_low="
+ "0x%08x has crossed 4G boundary\n",
+ start_addr, sata_cmd.len,
+ end_addr_high, end_addr_low));
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info,
+ buf_prd[0]);
+ sata_cmd.addr_low =
+ lower_32_bits(phys_addr);
+ sata_cmd.addr_high =
+ upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1 << 31);
+ }
+ } else if (task->num_scatter == 0) {
+ sata_cmd.addr_low = 0;
+ sata_cmd.addr_high = 0;
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ }
+ /* scsi cdb */
+ sata_cmd.atapi_scsi_cdb[0] =
+ cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
+ sata_cmd.atapi_scsi_cdb[1] =
+ cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
+ sata_cmd.atapi_scsi_cdb[2] =
+ cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
+ sata_cmd.atapi_scsi_cdb[3] =
+ cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
+ }
+
+ /* Check for read log for failed drive and return */
+ if (sata_cmd.sata_fis.command == 0x2f) {
+ if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) ||
+ (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) {
+ struct task_status_struct *ts;
+
+ pm8001_ha_dev->id &= 0xDFFFFFFF;
+ ts = &task->task_status;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_STAT_GOOD;
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags &
+ SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p resp 0x%x "
+ " stat 0x%x but aborted by upper layer "
+ "\n", task, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
+ return 0;
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+ pm8001_ccb_task_free_done(pm8001_ha, task,
+ ccb, tag);
+ return 0;
+ }
+ }
+ }
+ q_index = (u32) (pm8001_ha_dev->id & 0x00ffffff) % PM8001_MAX_OUTB_NUM;
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc,
+ &sata_cmd, q_index);
+ return ret;
+}
+
+/**
+ * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+ struct phy_start_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTART;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
+ /*
+ ** [0:7] PHY Identifier
+ ** [8:11] link rate 1.5G, 3G, 6G
+ ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b Auto mode
+ ** [14] 0b disable spin up hold; 1b enable spin up hold
+ ** [15] ob no change in current PHY analig setup 1b enable using SPAST
+ */
+ if (!IS_SPCV_12G(pm8001_ha->pdev))
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 |
+ LINKRATE_30 | LINKRATE_60 | phy_id);
+ else
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 |
+ LINKRATE_30 | LINKRATE_60 | LINKRATE_120 |
+ phy_id);
+
+ /* SSC Disable and SAS Analog ST configuration */
+ /**
+ payload.ase_sh_lm_slr_phyid =
+ cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
+ phy_id);
+ Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
+ **/
+
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
+ payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+ memcpy(payload.sas_identify.sas_addr,
+ pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ payload.sas_identify.phy_id = phy_id;
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+ return ret;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+ u8 phy_id)
+{
+ struct phy_stop_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTOP;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ payload.phy_id = cpu_to_le32(phy_id);
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0);
+ return ret;
+}
+
+/**
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag)
+{
+ struct reg_dev_req payload;
+ u32 opc;
+ u32 stp_sspsmp_sata = 0x4;
+ struct inbound_queue_table *circularQ;
+ u32 linkrate, phy_id;
+ int rc, tag = 0xdeadbeef;
+ struct pm8001_ccb_info *ccb;
+ u8 retryFlag = 0x1;
+ u16 firstBurstSize = 0;
+ u16 ITNT = 2000;
+ struct domain_device *dev = pm8001_dev->sas_device;
+ struct domain_device *parent_dev = dev->parent;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->device = pm8001_dev;
+ ccb->ccb_tag = tag;
+ payload.tag = cpu_to_le32(tag);
+
+ if (flag == 1) {
+ stp_sspsmp_sata = 0x02; /*direct attached sata */
+ } else {
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
+ stp_sspsmp_sata = 0x00; /* stp*/
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+ pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
+ stp_sspsmp_sata = 0x01; /*ssp or smp*/
+ }
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+ phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+ else
+ phy_id = pm8001_dev->attached_phy;
+
+ opc = OPC_INB_REG_DEV;
+
+ linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+ pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+
+ payload.phyid_portid =
+ cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) |
+ ((phy_id & 0xFF) << 8));
+
+ payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |
+ ((linkrate & 0x0F) << 24) |
+ ((stp_sspsmp_sata & 0x03) << 28));
+ payload.firstburstsize_ITNexustimeout =
+ cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+
+ memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+ SAS_ADDR_SIZE);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+
+ return rc;
+}
+
+/**
+ * pm80xx_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op)
+{
+ struct local_phy_ctl_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+ memset(&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(1);
+ payload.phyop_phyid =
+ cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF));
+ ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+ return ret;
+}
+
+static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+#ifdef PM8001_USE_MSIX
+ return 1;
+#endif
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+ if (value)
+ return 1;
+ return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static irqreturn_t
+pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ pm80xx_chip_interrupt_disable(pm8001_ha, vec);
+ process_oq(pm8001_ha, vec);
+ pm80xx_chip_interrupt_enable(pm8001_ha, vec);
+ return IRQ_HANDLED;
+}
+
+void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
+ u32 operation, u32 phyid, u32 length, u32 *buf)
+{
+ u32 tag , i, j = 0;
+ int rc;
+ struct set_phy_profile_req payload;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SET_PHY_PROFILE;
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid & 0xFF));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk(" phy profile command for phy %x ,length is %d\n",
+ payload.ppc_phyid, length));
+ for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) {
+ payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i));
+ j++;
+ }
+ pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
+}
+
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf)
+{
+ u32 page_code, i;
+
+ page_code = SAS_PHY_ANALOG_SETTINGS_PAGE;
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ mpi_set_phy_profile_req(pm8001_ha,
+ SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
+ length = length + PHY_DWORD_LENGTH;
+ }
+ PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
+}
+const struct pm8001_dispatch pm8001_80xx_dispatch = {
+ .name = "pmc80xx",
+ .chip_init = pm80xx_chip_init,
+ .chip_soft_rst = pm80xx_chip_soft_rst,
+ .chip_rst = pm80xx_hw_chip_rst,
+ .chip_iounmap = pm8001_chip_iounmap,
+ .isr = pm80xx_chip_isr,
+ .is_our_interupt = pm80xx_chip_is_our_interupt,
+ .isr_process_oq = process_oq,
+ .interrupt_enable = pm80xx_chip_interrupt_enable,
+ .interrupt_disable = pm80xx_chip_interrupt_disable,
+ .make_prd = pm8001_chip_make_sg,
+ .smp_req = pm80xx_chip_smp_req,
+ .ssp_io_req = pm80xx_chip_ssp_io_req,
+ .sata_req = pm80xx_chip_sata_req,
+ .phy_start_req = pm80xx_chip_phy_start_req,
+ .phy_stop_req = pm80xx_chip_phy_stop_req,
+ .reg_dev_req = pm80xx_chip_reg_dev_req,
+ .dereg_dev_req = pm8001_chip_dereg_dev_req,
+ .phy_ctl_req = pm80xx_chip_phy_ctl_req,
+ .task_abort = pm8001_chip_abort_task,
+ .ssp_tm_req = pm8001_chip_ssp_tm_req,
+ .get_nvmd_req = pm8001_chip_get_nvmd_req,
+ .set_nvmd_req = pm8001_chip_set_nvmd_req,
+ .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
+ .set_dev_state_req = pm8001_chip_set_dev_state_req,
+};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
new file mode 100644
index 00000000000..9970a385795
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -0,0 +1,1532 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO 1 /* 0x000 */
+#define OPC_INB_PHYSTART 4 /* 0x004 */
+#define OPC_INB_PHYSTOP 5 /* 0x005 */
+#define OPC_INB_SSPINIIOSTART 6 /* 0x006 */
+#define OPC_INB_SSPINITMSTART 7 /* 0x007 */
+/* 0x8 RESV IN SPCv */
+#define OPC_INB_RSVD 8 /* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */
+#define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */
+/* 0xC, 0xD, 0xE removed in SPCv */
+#define OPC_INB_SSP_ABORT 15 /* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */
+#define OPC_INB_SMP_REQUEST 18 /* 0x012 */
+/* 0x13 SMP_RESPONSE is removed in SPCv */
+#define OPC_INB_SMP_ABORT 20 /* 0x014 */
+/* 0x16 RESV IN SPCv */
+#define OPC_INB_RSVD1 22 /* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */
+#define OPC_INB_SATA_ABORT 24 /* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */
+/* 0x1A RESV IN SPCv */
+#define OPC_INB_RSVD2 26 /* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */
+#define OPC_INB_GPIO 34 /* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */
+/* 0x25 RESV IN SPCv */
+#define OPC_INB_RSVD3 37 /* 0x025 */
+#define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */
+#define OPC_INB_PORT_CONTROL 39 /* 0x027 */
+#define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */
+#define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */
+#define OPC_INB_SET_DEV_INFO 44 /* 0x02C */
+/* 0x2D RESV IN SPCv */
+#define OPC_INB_RSVD4 45 /* 0x02D */
+#define OPC_INB_SGPIO_REGISTER 46 /* 0x02E */
+#define OPC_INB_PCIE_DIAG_EXEC 47 /* 0x02F */
+#define OPC_INB_SET_CONTROLLER_CONFIG 48 /* 0x030 */
+#define OPC_INB_GET_CONTROLLER_CONFIG 49 /* 0x031 */
+#define OPC_INB_REG_DEV 50 /* 0x032 */
+#define OPC_INB_SAS_HW_EVENT_ACK 51 /* 0x033 */
+#define OPC_INB_GET_DEVICE_INFO 52 /* 0x034 */
+#define OPC_INB_GET_PHY_PROFILE 53 /* 0x035 */
+#define OPC_INB_FLASH_OP_EXT 54 /* 0x036 */
+#define OPC_INB_SET_PHY_PROFILE 55 /* 0x037 */
+#define OPC_INB_KEK_MANAGEMENT 256 /* 0x100 */
+#define OPC_INB_DEK_MANAGEMENT 257 /* 0x101 */
+#define OPC_INB_SSP_INI_DIF_ENC_IO 258 /* 0x102 */
+#define OPC_INB_SATA_DIF_ENC_IO 259 /* 0x103 */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO 1 /* 0x001 */
+#define OPC_OUB_RSVD 4 /* 0x004 */
+#define OPC_OUB_SSP_COMP 5 /* 0x005 */
+#define OPC_OUB_SMP_COMP 6 /* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */
+#define OPC_OUB_RSVD1 10 /* 0x00A */
+#define OPC_OUB_DEREG_DEV 11 /* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */
+#define OPC_OUB_SATA_COMP 13 /* 0x00D */
+#define OPC_OUB_SATA_EVENT 14 /* 0x00E */
+#define OPC_OUB_SSP_EVENT 15 /* 0x00F */
+#define OPC_OUB_RSVD2 16 /* 0x010 */
+/* 0x11 - SMP_RECEIVED Notification removed in SPCv*/
+#define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */
+#define OPC_OUB_RSVD3 19 /* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */
+#define OPC_OUB_GPIO_EVENT 23 /* 0x017 */
+#define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */
+#define OPC_OUB_RSVD4 31 /* 0x01F */
+#define OPC_OUB_PORT_CONTROL 32 /* 0x020 */
+#define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */
+#define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */
+#define OPC_OUB_RSVD5 41 /* 0x029 */
+#define OPC_OUB_HW_EVENT 1792 /* 0x700 */
+#define OPC_OUB_DEV_HANDLE_ARRIV 1824 /* 0x720 */
+#define OPC_OUB_THERM_HW_EVENT 1840 /* 0x730 */
+#define OPC_OUB_SGPIO_RESP 2094 /* 0x82E */
+#define OPC_OUB_PCIE_DIAG_EXECUTE 2095 /* 0x82F */
+#define OPC_OUB_DEV_REGIST 2098 /* 0x832 */
+#define OPC_OUB_SAS_HW_EVENT_ACK 2099 /* 0x833 */
+#define OPC_OUB_GET_DEVICE_INFO 2100 /* 0x834 */
+/* spcv specific commands */
+#define OPC_OUB_PHY_START_RESP 2052 /* 0x804 */
+#define OPC_OUB_PHY_STOP_RESP 2053 /* 0x805 */
+#define OPC_OUB_SET_CONTROLLER_CONFIG 2096 /* 0x830 */
+#define OPC_OUB_GET_CONTROLLER_CONFIG 2097 /* 0x831 */
+#define OPC_OUB_GET_PHY_PROFILE 2101 /* 0x835 */
+#define OPC_OUB_FLASH_OP_EXT 2102 /* 0x836 */
+#define OPC_OUB_SET_PHY_PROFILE 2103 /* 0x837 */
+#define OPC_OUB_KEK_MANAGEMENT_RESP 2304 /* 0x900 */
+#define OPC_OUB_DEK_MANAGEMENT_RESP 2305 /* 0x901 */
+#define OPC_OUB_SSP_COALESCED_COMP_RESP 2306 /* 0x902 */
+
+/* for phy start*/
+#define SSC_DISABLE_15 (0x01 << 16)
+#define SSC_DISABLE_30 (0x02 << 16)
+#define SSC_DISABLE_60 (0x04 << 16)
+#define SAS_ASE (0x01 << 15)
+#define SPINHOLD_DISABLE (0x00 << 14)
+#define SPINHOLD_ENABLE (0x01 << 14)
+#define LINKMODE_SAS (0x01 << 12)
+#define LINKMODE_DSATA (0x02 << 12)
+#define LINKMODE_AUTO (0x03 << 12)
+#define LINKRATE_15 (0x01 << 8)
+#define LINKRATE_30 (0x02 << 8)
+#define LINKRATE_60 (0x06 << 8)
+#define LINKRATE_120 (0x08 << 8)
+
+/* phy_profile */
+#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
+#define PHY_DWORD_LENGTH 0xC
+
+/* Thermal related */
+#define THERMAL_ENABLE 0x1
+#define THERMAL_LOG_ENABLE 0x1
+#define THERMAL_OP_CODE 0x6
+#define LTEMPHIL 70
+#define RTEMPHIL 100
+
+/* Encryption info */
+#define SCRATCH_PAD3_ENC_DISABLED 0x00000000
+#define SCRATCH_PAD3_ENC_DIS_ERR 0x00000001
+#define SCRATCH_PAD3_ENC_ENA_ERR 0x00000002
+#define SCRATCH_PAD3_ENC_READY 0x00000003
+#define SCRATCH_PAD3_ENC_MASK SCRATCH_PAD3_ENC_READY
+
+#define SCRATCH_PAD3_XTS_ENABLED (1 << 14)
+#define SCRATCH_PAD3_SMA_ENABLED (1 << 4)
+#define SCRATCH_PAD3_SMB_ENABLED (1 << 5)
+#define SCRATCH_PAD3_SMF_ENABLED 0
+#define SCRATCH_PAD3_SM_MASK 0x000000F0
+#define SCRATCH_PAD3_ERR_CODE 0x00FF0000
+
+#define SEC_MODE_SMF 0x0
+#define SEC_MODE_SMA 0x100
+#define SEC_MODE_SMB 0x200
+#define CIPHER_MODE_ECB 0x00000001
+#define CIPHER_MODE_XTS 0x00000002
+#define KEK_MGMT_SUBOP_KEYCARDUPDATE 0x4
+
+/* SAS protocol timer configuration page */
+#define SAS_PROTOCOL_TIMER_CONFIG_PAGE 0x04
+#define STP_MCT_TMO 32
+#define SSP_MCT_TMO 32
+#define SAS_MAX_OPEN_TIME 5
+#define SMP_MAX_CONN_TIMER 0xFF
+#define STP_FRM_TIMER 0
+#define STP_IDLE_TIME 5 /* 5 us; controller default */
+#define SAS_MFD 0
+#define SAS_OPNRJT_RTRY_INTVL 2
+#define SAS_DOPNRJT_RTRY_TMO 128
+#define SAS_COPNRJT_RTRY_TMO 128
+
+/* for phy state */
+#define PHY_STATE_LINK_UP_SPCV 0x2
+/*
+ Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
+ Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
+ is DOPNRJT_RTRY_TMO
+*/
+#define SAS_DOPNRJT_RTRY_THR 23438
+#define SAS_COPNRJT_RTRY_THR 23438
+#define SAS_MAX_AIP 0x200000
+#define IT_NEXUS_TIMEOUT 0x7D0
+#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+
+struct mpi_msg_hdr {
+ __le32 header; /* Bits [11:0] - Message operation code */
+ /* Bits [15:12] - Message Category */
+ /* Bits [21:16] - Outboundqueue ID for the
+ operation completion message */
+ /* Bits [23:22] - Reserved */
+ /* Bits [28:24] - Buffer Count, indicates how
+ many buffer are allocated for the massage */
+ /* Bits [30:29] - Reserved */
+ /* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (128 bytes)
+ */
+struct phy_start_req {
+ __le32 tag;
+ __le32 ase_sh_lm_slr_phyid;
+ struct sas_identify_frame sas_identify; /* 28 Bytes */
+ __le32 spasti;
+ u32 reserved[21];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (128 bytes)
+ */
+struct phy_stop_req {
+ __le32 tag;
+ __le32 phy_id;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/* set device bits fis - device to host */
+struct set_dev_bits_fis {
+ u8 fis_type; /* 0xA1*/
+ u8 n_i_pmport;
+ /* b7 : n Bit. Notification bit. If set device needs attention. */
+ /* b6 : i Bit. Interrupt Bit */
+ /* b5-b4: reserved2 */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u32 _r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct pio_setup_fis {
+ u8 fis_type; /* 0x5f */
+ u8 i_d_pmPort;
+ /* b7 : reserved */
+ /* b6 : i bit. Interrupt bit */
+ /* b5 : d bit. data transfer direction. set to 1 for device to host
+ xfer */
+ /* b4 : reserved */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+ u8 sector_count;
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 e_status;
+ u8 _r_c[2];
+ u8 transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to describe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u32 sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+/* updated outbound struct for spcv */
+
+struct hw_event_resp {
+ __le32 lr_status_evt_portid;
+ __le32 evt_param;
+ __le32 phyid_npip_portstate;
+ struct sas_identify_frame sas_identify;
+ struct dev_to_host_fis sata_fis;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure for thermal event notification
+ */
+
+struct thermal_hw_event {
+ __le32 thermal_event;
+ __le32 rht_lht;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+ __le32 tag;
+ __le32 phyid_portid;
+ __le32 dtype_dlr_mcn_ir_retry;
+ __le32 firstburstsize_ITNexustimeout;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ __le32 upper_device_id;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+ __le32 tag;
+ __le32 device_id;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration (64 bytes)
+ */
+struct dev_reg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+ __le32 tag;
+ __le32 phyop_phyid;
+ u32 reserved1[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+ struct local_phy_ctl_resp {
+ __le32 tag;
+ __le32 phyop_phyid;
+ __le32 status;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x000000FF
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+ __le32 tag;
+ __le32 portop_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+struct hw_event_ack_req {
+ __le32 tag;
+ __le32 phyid_sea_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_START Response Command
+ * indicates the completion of PHY_START command (64 bytes)
+ */
+struct phy_start_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 phyid;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_STOP Response Command
+ * indicates the completion of PHY_STOP command (64 bytes)
+ */
+struct phy_stop_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 phyid;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion (n bytes)
+ */
+struct ssp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 ssptag_rescv_rescpad;
+ struct ssp_response_iu ssp_resp_iu;
+ __le32 residual_count;
+} __attribute__((packed, aligned(4)));
+
+#define SSP_RESCV_BIT 0x00010000
+
+/*
+ * brief the data structure of SATA EVNET response
+ * use to indicate a SATA Completion (64 bytes)
+ */
+struct sata_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved;
+ __le32 event_param0;
+ __le32 event_param1;
+ __le32 sata_addr_h32;
+ __le32 sata_addr_l32;
+ __le32 e_udt1_udt0_crc;
+ __le32 e_udt5_udt4_udt3_udt2;
+ __le32 a_udt1_udt0_crc;
+ __le32 a_udt5_udt4_udt3_udt2;
+ __le32 hwdevid_diferr;
+ __le32 err_framelen_byteoffset;
+ __le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion (64 bytes)
+ */
+struct ssp_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ __le32 ssp_tag;
+ __le32 event_param0;
+ __le32 event_param1;
+ __le32 sas_addr_h32;
+ __le32 sas_addr_l32;
+ __le32 e_udt1_udt0_crc;
+ __le32 e_udt5_udt4_udt3_udt2;
+ __le32 a_udt1_udt0_crc;
+ __le32 a_udt5_udt4_udt3_udt2;
+ __le32 hwdevid_diferr;
+ __le32 err_framelen_byteoffset;
+ __le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+ __le32 status;
+ __le32 inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+#define GENERAL_EVENT_PAYLOAD 14
+#define OPCODE_BITS 0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 len_ip_ir;
+ /* Bits [0] - Indirect response */
+ /* Bits [1] - Indirect Payload */
+ /* Bits [15:2] - Reserved */
+ /* Bits [23:16] - direct payload Len */
+ /* Bits [31:24] - Reserved */
+ u8 smp_req16[16];
+ union {
+ u8 smp_req[32];
+ struct {
+ __le64 long_req_addr;/* sg dma address, LE */
+ __le32 long_req_size;/* LE */
+ u32 _r_a;
+ __le64 long_resp_addr;/* sg dma address, LE */
+ __le32 long_resp_size;/* LE */
+ u32 _r_b;
+ } long_smp_req;/* sequencer extension */
+ };
+ __le32 rsvd[16];
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u8 _r_a[252];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 tag_to_abort;
+ __le32 abort_all;
+ u32 reserved[27];
+} __attribute__((packed, aligned(4)));
+
+/* These flags used for SSP SMP & SATA Abort */
+#define ABORT_MASK 0x3
+#define ABORT_SINGLE 0x0
+#define ABORT_ALL 0x1
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 scp;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+ __le32 tag;
+ __le32 operation_phyid;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 pat1_pat2;
+ __le32 threshold;
+ __le32 codepat_errmsk;
+ __le32 pmon;
+ __le32 pERF1CTL;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 nds;
+ u32 reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+
+struct sata_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 ncqtag_atap_dir_m_dad;
+ struct host_to_dev_fis sata_fis;
+ u32 reserved1;
+ u32 reserved2; /* dword 11. rsvd for normal I/O. */
+ /* EPLE Descl for enc I/O */
+ u32 addr_low; /* dword 12. rsvd for enc I/O */
+ u32 addr_high; /* dword 13. reserved for enc I/O */
+ __le32 len; /* dword 14: length for normal I/O. */
+ /* EPLE Desch for enc I/O */
+ __le32 esgl; /* dword 15. rsvd for enc I/O */
+ __le32 atapi_scsi_cdb[4]; /* dword 16-19. rsvd for enc I/O */
+ /* The below fields are reserved for normal I/O */
+ __le32 key_index_mode; /* dword 20 */
+ __le32 sector_cnt_enss;/* dword 21 */
+ __le32 keytagl; /* dword 22 */
+ __le32 keytagh; /* dword 23 */
+ __le32 twk_val0; /* dword 24 */
+ __le32 twk_val1; /* dword 25 */
+ __le32 twk_val2; /* dword 26 */
+ __le32 twk_val3; /* dword 27 */
+ __le32 enc_addr_low; /* dword 28. Encryption SGL address high */
+ __le32 enc_addr_high; /* dword 29. Encryption SGL address low */
+ __le32 enc_len; /* dword 30. Encryption length */
+ __le32 enc_esgl; /* dword 31. Encryption esgl bit */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 relate_tag;
+ __le32 tmf;
+ u8 lun[8];
+ __le32 ds_ads_m;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_info_unit {
+ u8 lun[8];/* SCSI Logical Unit Number */
+ u8 reserved1;/* reserved */
+ u8 efb_prio_attr;
+ /* B7 : enabledFirstBurst */
+ /* B6-3 : taskPriority */
+ /* B2-0 : taskAttribute */
+ u8 reserved2; /* reserved */
+ u8 additional_cdb_len;
+ /* B7-2 : additional_cdb_len */
+ /* B1-0 : reserved */
+ u8 cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+struct ssp_ini_io_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dad_dir_m_tlr;
+ struct ssp_info_unit ssp_iu;
+ __le32 addr_low; /* dword 12: sgl low for normal I/O. */
+ /* epl_descl for encryption I/O */
+ __le32 addr_high; /* dword 13: sgl hi for normal I/O */
+ /* dpl_descl for encryption I/O */
+ __le32 len; /* dword 14: len for normal I/O. */
+ /* edpl_desch for encryption I/O */
+ __le32 esgl; /* dword 15: ESGL bit for normal I/O. */
+ /* user defined tag mask for enc I/O */
+ /* The below fields are reserved for normal I/O */
+ u8 udt[12]; /* dword 16-18 */
+ __le32 sectcnt_ios; /* dword 19 */
+ __le32 key_cmode; /* dword 20 */
+ __le32 ks_enss; /* dword 21 */
+ __le32 keytagl; /* dword 22 */
+ __le32 keytagh; /* dword 23 */
+ __le32 twk_val0; /* dword 24 */
+ __le32 twk_val1; /* dword 25 */
+ __le32 twk_val2; /* dword 26 */
+ __le32 twk_val3; /* dword 27 */
+ __le32 enc_addr_low; /* dword 28: Encryption sgl addr low */
+ __le32 enc_addr_high; /* dword 29: Encryption sgl addr hi */
+ __le32 enc_len; /* dword 30: Encryption length */
+ __le32 enc_esgl; /* dword 31: ESGL bit for encryption */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SSP_INI_DIF_ENC_IO COMMAND
+ * use to initiate SSP I/O operation with optional DIF/ENC
+ */
+struct ssp_dif_enc_io_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dirMTlr;
+ __le32 sspiu0;
+ __le32 sspiu1;
+ __le32 sspiu2;
+ __le32 sspiu3;
+ __le32 sspiu4;
+ __le32 sspiu5;
+ __le32 sspiu6;
+ __le32 epl_des;
+ __le32 dpl_desl_ndplr;
+ __le32 dpl_desh;
+ __le32 uum_uuv_bss_difbits;
+ u8 udt[12];
+ __le32 sectcnt_ios;
+ __le32 key_cmode;
+ __le32 ks_enss;
+ __le32 keytagl;
+ __le32 keytagh;
+ __le32 twk_val0;
+ __le32 twk_val1;
+ __le32 twk_val2;
+ __le32 twk_val3;
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+ __le32 tag;
+ __le32 cur_image_offset;
+ __le32 cur_image_len;
+ __le32 total_image_len;
+ u32 reserved0[7];
+ __le32 sgl_addr_lo;
+ __le32 sgl_addr_hi;
+ __le32 len;
+ __le32 ext_reserved;
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+ struct fw_flash_Update_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+struct set_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_req {
+ __le32 tag;
+ __le32 cfg_pg[14];
+ u32 reserved[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET CONTROLLER CONFIG COMMAND
+ * use to get controller configuration page
+ */
+struct get_ctrl_cfg_req {
+ __le32 tag;
+ __le32 pgcd;
+ __le32 int_vec;
+ u32 reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for KEK_MANAGEMENT COMMAND
+ * use for KEK management
+ */
+struct kek_mgmt_req {
+ __le32 tag;
+ __le32 new_curidx_ksop;
+ u32 reserved;
+ __le32 kblob[12];
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for DEK_MANAGEMENT COMMAND
+ * use for DEK management
+ */
+struct dek_mgmt_req {
+ __le32 tag;
+ __le32 kidx_dsop;
+ __le32 dekidx;
+ __le32 addr_l;
+ __le32 addr_h;
+ __le32 nent;
+ __le32 dbf_tblsize;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct set_phy_profile_req {
+ __le32 tag;
+ __le32 ppc_phyid;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct get_phy_profile_req {
+ __le32 tag;
+ __le32 ppc_phyid;
+ __le32 profile[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for EXT FLASH PARTITION
+ * use to manage ext flash partition
+ */
+struct ext_flash_partition_req {
+ __le32 tag;
+ __le32 cmd;
+ __le32 offset;
+ __le32 len;
+ u32 reserved[7];
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len1;
+ __le32 ext;
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define TWI_DEVICE 0x0
+#define C_SEEPROM 0x1
+#define VPD_FLASH 0x4
+#define AAP1_RDUMP 0x5
+#define IOP_RDUMP 0x6
+#define EXPAN_ROM 0x7
+
+#define IPMode 0x80000000
+#define NVMD_TYPE 0x0000000F
+#define NVMD_STAT 0x0000FFFF
+#define NVMD_LEN 0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+ __le32 tag;
+ __le32 ir_tda_bn_dps_das_nvm;
+ __le32 dlen_status;
+ __le32 nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 Status;
+ __le32 ReportData;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ __le32 pds_nds;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - begins */
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 err_qlfr_pgcd;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+struct get_ctrl_cfg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 err_qlfr;
+ __le32 confg_page[12];
+} __attribute__((packed, aligned(4)));
+
+struct kek_mgmt_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 kidx_new_curr_ksop;
+ __le32 err_qlfr;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+struct dek_mgmt_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 kekidx_tbls_dsop;
+ __le32 dekidx;
+ __le32 err_qlfr;
+ u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct get_phy_profile_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 ppc_phyid;
+ __le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct flash_op_ext_resp {
+ __le32 tag;
+ __le32 cmd;
+ __le32 status;
+ __le32 epart_size;
+ __le32 epart_sect_size;
+ u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct set_phy_profile_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 ppc_phyid;
+ __le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_coalesced_comp_resp {
+ __le32 coal_cnt;
+ __le32 tag0;
+ __le32 ssp_tag0;
+ __le32 tag1;
+ __le32 ssp_tag1;
+ __le32 add_tag_ssp_tag[10];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - ends */
+
+/* brief data structure for SAS protocol timer configuration page.
+ *
+ */
+struct SASProtocolTimerConfig {
+ __le32 pageCode; /* 0 */
+ __le32 MST_MSI; /* 1 */
+ __le32 STP_SSP_MCT_TMO; /* 2 */
+ __le32 STP_FRM_TMO; /* 3 */
+ __le32 STP_IDLE_TMO; /* 4 */
+ __le32 OPNRJT_RTRY_INTVL; /* 5 */
+ __le32 Data_Cmd_OPNRJT_RTRY_TMO; /* 6 */
+ __le32 Data_Cmd_OPNRJT_RTRY_THR; /* 7 */
+ __le32 MAX_AIP; /* 8 */
+} __attribute__((packed, aligned(4)));
+
+typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START 0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE 0x02
+#define HW_EVENT_PHY_STOP_STATUS 0x03
+#define HW_EVENT_SAS_PHY_UP 0x04
+#define HW_EVENT_SATA_PHY_UP 0x05
+#define HW_EVENT_SATA_SPINUP_HOLD 0x06
+#define HW_EVENT_PHY_DOWN 0x07
+#define HW_EVENT_PORT_INVALID 0x08
+#define HW_EVENT_BROADCAST_CHANGE 0x09
+#define HW_EVENT_PHY_ERROR 0x0A
+#define HW_EVENT_BROADCAST_SES 0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR 0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED 0x0D
+#define HW_EVENT_MALFUNCTION 0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT 0x0F
+#define HW_EVENT_BROADCAST_EXP 0x10
+#define HW_EVENT_PHY_START_STATUS 0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17
+#define HW_EVENT_PORT_RECOVER 0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO 0x19
+#define HW_EVENT_PORT_RESET_COMPLETE 0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT 0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED 0x00
+#define PORT_VALID 0x01
+#define PORT_LOSTCOMM 0x02
+#define PORT_IN_RESET 0x04
+#define PORT_3RD_PARTY_RESET 0x07
+#define PORT_INVALID 0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS 0x00
+#define IO_ABORTED 0x01
+#define IO_OVERFLOW 0x02
+#define IO_UNDERFLOW 0x03
+#define IO_FAILED 0x04
+#define IO_ABORT_RESET 0x05
+#define IO_NOT_VALID 0x06
+#define IO_NO_DEVICE 0x07
+#define IO_ILLEGAL_PARAMETER 0x08
+#define IO_LINK_FAILURE 0x09
+#define IO_PROG_ERROR 0x0A
+
+#define IO_EDC_IN_ERROR 0x0B
+#define IO_EDC_OUT_ERROR 0x0C
+#define IO_ERROR_HW_TIMEOUT 0x0D
+#define IO_XFER_ERROR_BREAK 0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY 0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11
+#define IO_OPEN_CNX_ERROR_BREAK 0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17
+/* This error code 0x18 is not used on SPCv */
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18
+#define IO_XFER_ERROR_NAK_RECEIVED 0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A
+#define IO_XFER_ERROR_PEER_ABORTED 0x1B
+#define IO_XFER_ERROR_RX_FRAME 0x1C
+#define IO_XFER_ERROR_DMA 0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F
+#define IO_XFER_ERROR_SATA 0x20
+
+/* This error code 0x22 is not used on SPCv */
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT 0x24
+/* This error code 0x25 is not used on SPCv */
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30
+
+/* The following error code 0x31 and 0x32 are not using (obsolete) */
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH 0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35
+#define IO_XFER_CMD_FRAME_ISSUED 0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37
+#define IO_PORT_IN_RESET 0x38
+#define IO_DS_NON_OPERATIONAL 0x39
+#define IO_DS_IN_RECOVERY 0x3A
+#define IO_TM_TAG_NOT_FOUND 0x3B
+#define IO_XFER_PIO_SETUP_ERROR 0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D
+#define IO_DS_IN_ERROR 0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F
+#define IO_ABORT_IN_PROGRESS 0x40
+#define IO_ABORT_DELAYED 0x41
+#define IO_INVALID_LENGTH 0x42
+
+/********** additional response event values *****************/
+
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY_ALT 0x43
+#define IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED 0x44
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO 0x45
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST 0x46
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE 0x47
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED 0x48
+#define IO_DS_INVALID 0x49
+/* WARNING: the value is not contiguous from here */
+#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR 0x52
+#define IO_XFER_DMA_ACTIVATE_TIMEOUT 0x53
+#define IO_XFER_ERROR_INTERNAL_CRC_ERROR 0x54
+#define MPI_IO_RQE_BUSY_FULL 0x55
+#define IO_XFER_ERR_EOB_DATA_OVERRUN 0x56
+#define IO_XFR_ERROR_INVALID_SSP_RSP_FRAME 0x57
+#define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED 0x58
+
+#define MPI_ERR_IO_RESOURCE_UNAVAILABLE 0x1004
+#define MPI_ERR_ATAPI_DEVICE_BUSY 0x1024
+
+#define IO_XFR_ERROR_DEK_KEY_CACHE_MISS 0x2040
+/*
+ * An encryption IO request failed due to DEK Key Tag mismatch.
+ * The key tag supplied in the encryption IOMB does not match with
+ * the Key Tag in the referenced DEK Entry.
+ */
+#define IO_XFR_ERROR_DEK_KEY_TAG_MISMATCH 0x2041
+#define IO_XFR_ERROR_CIPHER_MODE_INVALID 0x2042
+/*
+ * An encryption I/O request failed because the initial value (IV)
+ * in the unwrapped DEK blob didn't match the IV used to unwrap it.
+ */
+#define IO_XFR_ERROR_DEK_IV_MISMATCH 0x2043
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_DEK_RAM_INTERFACE_ERROR 0x2044
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_INTERNAL_RAM 0x2045
+/*
+ * An encryption I/O request failed
+ * because the DEK index specified in the I/O was outside the bounds of
+ * the total number of entries in the host DEK table.
+ */
+#define IO_XFR_ERROR_DEK_INDEX_OUT_OF_BOUNDS0x2046
+
+/* define DIF IO response error status code */
+#define IO_XFR_ERROR_DIF_MISMATCH 0x3000
+#define IO_XFR_ERROR_DIF_APPLICATION_TAG_MISMATCH 0x3001
+#define IO_XFR_ERROR_DIF_REFERENCE_TAG_MISMATCH 0x3002
+#define IO_XFR_ERROR_DIF_CRC_MISMATCH 0x3003
+
+/* define operator management response status and error qualifier code */
+#define OPR_MGMT_OP_NOT_SUPPORTED 0x2060
+#define OPR_MGMT_MPI_ENC_ERR_OPR_PARAM_ILLEGAL 0x2061
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ID_NOT_FOUND 0x2062
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ROLE_NOT_MATCH 0x2063
+#define OPR_MGMT_MPI_ENC_ERR_OPR_MAX_NUM_EXCEEDED 0x2064
+#define OPR_MGMT_MPI_ENC_ERR_KEK_UNWRAP_FAIL 0x2022
+#define OPR_MGMT_MPI_ENC_ERR_NVRAM_OPERATION_FAILURE 0x2023
+/***************** additional response event values ***************/
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC 0x2023
+
+/* MSGU CONFIGURATION TABLE*/
+
+#define SPCv_MSGU_CFG_TABLE_UPDATE 0x001
+#define SPCv_MSGU_CFG_TABLE_RESET 0x002
+#define SPCv_MSGU_CFG_TABLE_FREEZE 0x004
+#define SPCv_MSGU_CFG_TABLE_UNFREEZE 0x008
+#define MSGU_IBDB_SET 0x00
+#define MSGU_HOST_INT_STATUS 0x08
+#define MSGU_HOST_INT_MASK 0x0C
+#define MSGU_IOPIB_INT_STATUS 0x18
+#define MSGU_IOPIB_INT_MASK 0x1C
+#define MSGU_IBDB_CLEAR 0x20
+
+#define MSGU_MSGU_CONTROL 0x24
+#define MSGU_ODR 0x20
+#define MSGU_ODCR 0x28
+
+#define MSGU_ODMR 0x30
+#define MSGU_ODMR_U 0x34
+#define MSGU_ODMR_CLR 0x38
+#define MSGU_ODMR_CLR_U 0x3C
+#define MSGU_OD_RSVD 0x40
+
+#define MSGU_SCRATCH_PAD_0 0x44
+#define MSGU_SCRATCH_PAD_1 0x48
+#define MSGU_SCRATCH_PAD_2 0x4C
+#define MSGU_SCRATCH_PAD_3 0x50
+#define MSGU_HOST_SCRATCH_PAD_0 0x54
+#define MSGU_HOST_SCRATCH_PAD_1 0x58
+#define MSGU_HOST_SCRATCH_PAD_2 0x5C
+#define MSGU_HOST_SCRATCH_PAD_3 0x60
+#define MSGU_HOST_SCRATCH_PAD_4 0x64
+#define MSGU_HOST_SCRATCH_PAD_5 0x68
+#define MSGU_HOST_SCRATCH_PAD_6 0x6C
+#define MSGU_HOST_SCRATCH_PAD_7 0x70
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL 0xFFFFFFFF/* mask all
+ interrupt vector */
+#define ODMR_CLEAR_ALL 0 /* clear all
+ interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all
+ interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET 0x2000
+#define MSIX_TABLE_ELEMENT_SIZE 0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
+#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + \
+ MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE 0x1
+#define MSIX_INTERRUPT_ENABLE 0x0
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD_RAAE_READY 0x3
+#define SCRATCH_PAD_ILA_READY 0xC
+#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
+#define SCRATCH_PAD_IOP0_READY 0xC00
+#define SCRATCH_PAD_IOP1_READY 0x3000
+
+/* boot loader state */
+#define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */
+#define SCRATCH_PAD1_BOOTSTATE_SUCESS 0x0 /* Load successful */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM 0x10 /* HDA SEEPROM */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP 0x20 /* HDA BootStrap Pins */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET 0x30 /* HDA Soft Reset */
+#define SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR 0x40 /* HDA critical error */
+#define SCRATCH_PAD1_BOOTSTATE_R1 0x50 /* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_R2 0x60 /* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_FATAL 0x70 /* Fatal Error */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR 0x00 /* power on state */
+#define SCRATCH_PAD2_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD2_ERR 0x02 /* error state */
+#define SCRATCH_PAD2_RDY 0x03 /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW rdy for soft reset flag */
+#define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED 0x000003FC/* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET 0x00 /* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION 0x04 /* DWORD 0x01 */
+#define MAIN_FW_REVISION 0x08 /* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C /* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET 0x10 /* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET 0x14 /* DWORD 0x05 */
+#define MAIN_GST_OFFSET 0x18 /* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET 0x1C /* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET 0x20 /* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET 0x24 /* DWORD 0x09 */
+
+/* 0x28 - 0x4C - RSVD */
+#define MAIN_EVENT_CRC_CHECK 0x48 /* DWORD 0x12 */
+#define MAIN_EVENT_LOG_ADDR_HI 0x50 /* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO 0x54 /* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE 0x58 /* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION 0x5C /* DWORD 0x17 */
+#define MAIN_PCS_EVENT_LOG_ADDR_HI 0x60 /* DWORD 0x18 */
+#define MAIN_PCS_EVENT_LOG_ADDR_LO 0x64 /* DWORD 0x19 */
+#define MAIN_PCS_EVENT_LOG_BUFF_SIZE 0x68 /* DWORD 0x1A */
+#define MAIN_PCS_EVENT_LOG_OPTION 0x6C /* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT 0x70 /* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74 /* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78 /* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C /* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80 /* DWORD 0x20 */
+#define MAIN_GPIO_LED_FLAGS_OFFSET 0x84 /* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET 0x88 /* DWORD 0x22 */
+
+#define MAIN_INT_VECTOR_TABLE_OFFSET 0x8C /* DWORD 0x23 */
+#define MAIN_SAS_PHY_ATTR_TABLE_OFFSET 0x90 /* DWORD 0x24 */
+#define MAIN_PORT_RECOVERY_TIMER 0x94 /* DWORD 0x25 */
+#define MAIN_INT_REASSERTION_DELAY 0x98 /* DWORD 0x26 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET 0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET 0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET 0x08
+#define GST_MSGUTCNT_OFFSET 0x0C
+#define GST_IOPTCNT_OFFSET 0x10
+/* 0x14 - 0x34 - RSVD */
+#define GST_GPIO_INPUT_VAL 0x38
+/* 0x3c - 0x40 - RSVD */
+#define GST_RERRINFO_OFFSET0 0x44
+#define GST_RERRINFO_OFFSET1 0x48
+#define GST_RERRINFO_OFFSET2 0x4c
+#define GST_RERRINFO_OFFSET3 0x50
+#define GST_RERRINFO_OFFSET4 0x54
+#define GST_RERRINFO_OFFSET5 0x58
+#define GST_RERRINFO_OFFSET6 0x5c
+#define GST_RERRINFO_OFFSET7 0x60
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT 0x00
+#define GST_MPI_STATE_INIT 0x01
+#define GST_MPI_STATE_TERMINATION 0x02
+#define GST_MPI_STATE_ERROR 0x03
+#define GST_MPI_STATE_MASK 0x07
+
+/* Per SAS PHY Attributes */
+
+#define PSPA_PHYSTATE0_OFFSET 0x00 /* Dword V */
+#define PSPA_OB_HW_EVENT_PID0_OFFSET 0x04 /* DWORD V+1 */
+#define PSPA_PHYSTATE1_OFFSET 0x08 /* Dword V+2 */
+#define PSPA_OB_HW_EVENT_PID1_OFFSET 0x0C /* DWORD V+3 */
+#define PSPA_PHYSTATE2_OFFSET 0x10 /* Dword V+4 */
+#define PSPA_OB_HW_EVENT_PID2_OFFSET 0x14 /* DWORD V+5 */
+#define PSPA_PHYSTATE3_OFFSET 0x18 /* Dword V+6 */
+#define PSPA_OB_HW_EVENT_PID3_OFFSET 0x1C /* DWORD V+7 */
+#define PSPA_PHYSTATE4_OFFSET 0x20 /* Dword V+8 */
+#define PSPA_OB_HW_EVENT_PID4_OFFSET 0x24 /* DWORD V+9 */
+#define PSPA_PHYSTATE5_OFFSET 0x28 /* Dword V+10 */
+#define PSPA_OB_HW_EVENT_PID5_OFFSET 0x2C /* DWORD V+11 */
+#define PSPA_PHYSTATE6_OFFSET 0x30 /* Dword V+12 */
+#define PSPA_OB_HW_EVENT_PID6_OFFSET 0x34 /* DWORD V+13 */
+#define PSPA_PHYSTATE7_OFFSET 0x38 /* Dword V+14 */
+#define PSPA_OB_HW_EVENT_PID7_OFFSET 0x3C /* DWORD V+15 */
+#define PSPA_PHYSTATE8_OFFSET 0x40 /* DWORD V+16 */
+#define PSPA_OB_HW_EVENT_PID8_OFFSET 0x44 /* DWORD V+17 */
+#define PSPA_PHYSTATE9_OFFSET 0x48 /* DWORD V+18 */
+#define PSPA_OB_HW_EVENT_PID9_OFFSET 0x4C /* DWORD V+19 */
+#define PSPA_PHYSTATE10_OFFSET 0x50 /* DWORD V+20 */
+#define PSPA_OB_HW_EVENT_PID10_OFFSET 0x54 /* DWORD V+21 */
+#define PSPA_PHYSTATE11_OFFSET 0x58 /* DWORD V+22 */
+#define PSPA_OB_HW_EVENT_PID11_OFFSET 0x5C /* DWORD V+23 */
+#define PSPA_PHYSTATE12_OFFSET 0x60 /* DWORD V+24 */
+#define PSPA_OB_HW_EVENT_PID12_OFFSET 0x64 /* DWORD V+25 */
+#define PSPA_PHYSTATE13_OFFSET 0x68 /* DWORD V+26 */
+#define PSPA_OB_HW_EVENT_PID13_OFFSET 0x6c /* DWORD V+27 */
+#define PSPA_PHYSTATE14_OFFSET 0x70 /* DWORD V+28 */
+#define PSPA_OB_HW_EVENT_PID14_OFFSET 0x74 /* DWORD V+29 */
+#define PSPA_PHYSTATE15_OFFSET 0x78 /* DWORD V+30 */
+#define PSPA_OB_HW_EVENT_PID15_OFFSET 0x7c /* DWORD V+31 */
+/* end PSPA */
+
+/* inbound queue configuration offset - byte offset */
+#define IB_PROPERITY_OFFSET 0x00
+#define IB_BASE_ADDR_HI_OFFSET 0x04
+#define IB_BASE_ADDR_LO_OFFSET 0x08
+#define IB_CI_BASE_ADDR_HI_OFFSET 0x0C
+#define IB_CI_BASE_ADDR_LO_OFFSET 0x10
+#define IB_PIPCI_BAR 0x14
+#define IB_PIPCI_BAR_OFFSET 0x18
+#define IB_RESERVED_OFFSET 0x1C
+
+/* outbound queue configuration offset - byte offset */
+#define OB_PROPERITY_OFFSET 0x00
+#define OB_BASE_ADDR_HI_OFFSET 0x04
+#define OB_BASE_ADDR_LO_OFFSET 0x08
+#define OB_PI_BASE_ADDR_HI_OFFSET 0x0C
+#define OB_PI_BASE_ADDR_LO_OFFSET 0x10
+#define OB_CIPCI_BAR 0x14
+#define OB_CIPCI_BAR_OFFSET 0x18
+#define OB_INTERRUPT_COALES_OFFSET 0x1C
+#define OB_DYNAMIC_COALES_OFFSET 0x20
+#define OB_PROPERTY_INT_ENABLE 0x40000000
+
+#define MBIC_NMI_ENABLE_VPE0_IOP 0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE 0x003040
+#define PCIE_EVENT_INTERRUPT 0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
+#define PCIE_ERROR_INTERRUPT 0x00304C
+
+/* SPCV soft reset */
+#define SPC_REG_SOFT_RESET 0x00001000
+#define SPCv_NORMAL_RESET_VALUE 0x1
+
+#define SPCv_SOFT_RESET_READ_MASK 0xC0
+#define SPCv_SOFT_RESET_NO_RESET 0x0
+#define SPCv_SOFT_RESET_NORMAL_RESET_OCCURED 0x40
+#define SPCv_SOFT_RESET_HDA_MODE_OCCURED 0x80
+#define SPCv_SOFT_RESET_CHIP_RESET_OCCURED 0xC0
+
+/* signature definition for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET 0x000000/* reset register */
+
+/* bit definition for SPC_RESET register */
+#define SPC_REG_RESET_OSSP 0x00000001
+#define SPC_REG_RESET_RAAE 0x00000002
+#define SPC_REG_RESET_PCS_SPBC 0x00000004
+#define SPC_REG_RESET_PCS_IOP_SS 0x00000008
+#define SPC_REG_RESET_PCS_AAP1_SS 0x00000010
+#define SPC_REG_RESET_PCS_AAP2_SS 0x00000020
+#define SPC_REG_RESET_PCS_LM 0x00000040
+#define SPC_REG_RESET_PCS 0x00000080
+#define SPC_REG_RESET_GSM 0x00000100
+#define SPC_REG_RESET_DDR2 0x00010000
+#define SPC_REG_RESET_BDMA_CORE 0x00020000
+#define SPC_REG_RESET_BDMA_SXCBI 0x00040000
+#define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000
+#define SPC_REG_RESET_PCIE_PWR 0x00100000
+#define SPC_REG_RESET_PCIE_SFT 0x00200000
+#define SPC_REG_RESET_PCS_SXCBI 0x00400000
+#define SPC_REG_RESET_LMS_SXCBI 0x00800000
+#define SPC_REG_RESET_PMIC_SXCBI 0x01000000
+#define SPC_REG_RESET_PMIC_CORE 0x02000000
+#define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000
+#define SPC_REG_RESET_DEVICE 0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPCV_IBW_AXI_TRANSLATION_LOW 0x001010
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET 0x00000000
+#define RAM_ECC_DB_ERR 0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC 0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC 0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK 0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK 0x00000048
+
+#define RB6_ACCESS_REG 0x6A0000
+#define HDAC_EXEC_CMD 0x0002
+#define HDA_C_PA 0xcb
+#define HDA_SEQ_ID_BITS 0x00ff0000
+#define HDA_GSM_OFFSET_BITS 0x00FFFFFF
+#define HDA_GSM_CMD_OFFSET_BITS 0x42C0
+#define HDA_GSM_RSP_OFFSET_BITS 0x42E0
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE 0x000000
+#define GSM_CONFIG_RESET_VALUE 0x00003b00
+#define GPIO_ADDR_BASE 0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET 0x80C0
+/* Magic number of soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST 0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS 0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID 0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
+
+
+#define MEMBASE_II_SHIFT_REGISTER 0x1010
+#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-07 08:20:09 +0000