diff options
Diffstat (limited to 'drivers/scsi/pcmcia')
| -rw-r--r-- | drivers/scsi/pcmcia/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/Makefile | 2 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/aha152x_stub.c | 64 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/fdomain_stub.c | 42 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/nsp_cs.c | 269 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/nsp_cs.h | 15 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/nsp_debug.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/qlogic_stub.c | 60 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/sym53c500_cs.c | 60 |
9 files changed, 144 insertions, 371 deletions
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index 53857c6b6d4..ecc855c550a 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -11,7 +11,6 @@ if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA && m config PCMCIA_AHA152X tristate "Adaptec AHA152X PCMCIA support" - depends on !64BIT select SCSI_SPI_ATTRS help Say Y here if you intend to attach this type of PCMCIA SCSI host diff --git a/drivers/scsi/pcmcia/Makefile b/drivers/scsi/pcmcia/Makefile index eca379059db..683bf148b5b 100644 --- a/drivers/scsi/pcmcia/Makefile +++ b/drivers/scsi/pcmcia/Makefile @@ -1,5 +1,5 @@ -EXTRA_CFLAGS += -Idrivers/scsi +ccflags-y := -Idrivers/scsi # 16-bit client drivers obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 528733b4a39..7d1609fa233 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,8 +49,6 @@ #include <scsi/scsi_host.h> #include "aha152x.h" -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -80,7 +78,6 @@ MODULE_LICENSE("Dual MPL/GPL"); typedef struct scsi_info_t { struct pcmcia_device *p_dev; - dev_node_t node; struct Scsi_Host *host; } scsi_info_t; @@ -88,8 +85,6 @@ static void aha152x_release_cs(struct pcmcia_device *link); static void aha152x_detach(struct pcmcia_device *p_dev); static int aha152x_config_cs(struct pcmcia_device *link); -static struct pcmcia_device *dev_list; - static int aha152x_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -102,13 +97,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x20; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); } /* aha152x_attach */ @@ -127,24 +117,24 @@ static void aha152x_detach(struct pcmcia_device *link) /*====================================================================*/ -static int aha152x_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->io_lines = 10; + /* For New Media T&J, look for a SCSI window */ - if (cfg->io.win[0].len >= 0x20) - p_dev->io.BasePort1 = cfg->io.win[0].base; - else if ((cfg->io.nwin > 1) && - (cfg->io.win[1].len >= 0x20)) - p_dev->io.BasePort1 = cfg->io.win[1].base; - if ((cfg->io.nwin > 0) && - (p_dev->io.BasePort1 < 0xffff)) { - if (!pcmcia_request_io(p_dev, &p_dev->io)) - return 0; - } - return -EINVAL; + if ((p_dev->resource[0]->end < 0x20) && + (p_dev->resource[1]->end >= 0x20)) + p_dev->resource[0]->start = p_dev->resource[1]->start; + + if (p_dev->resource[0]->start >= 0xffff) + return -EINVAL; + + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + p_dev->resource[0]->end = 0x20; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + return pcmcia_request_io(p_dev); } static int aha152x_config_cs(struct pcmcia_device *link) @@ -160,19 +150,18 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Set configuration options for the aha152x driver */ memset(&s, 0, sizeof(s)); s.conf = "PCMCIA setup"; - s.io_port = link->io.BasePort1; - s.irq = link->irq.AssignedIRQ; + s.io_port = link->resource[0]->start; + s.irq = link->irq; s.scsiid = host_id; s.reconnect = reconnect; s.parity = parity; @@ -187,8 +176,6 @@ static int aha152x_config_cs(struct pcmcia_device *link) goto failed; } - sprintf(info->node.dev_name, "scsi%d", host->host_no); - link->dev_node = &info->node; info->host = host; return 0; @@ -215,7 +202,7 @@ static int aha152x_resume(struct pcmcia_device *link) return 0; } -static struct pcmcia_device_id aha152x_ids[] = { +static const struct pcmcia_device_id aha152x_ids[] = { PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e), PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e), PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20), @@ -227,9 +214,7 @@ MODULE_DEVICE_TABLE(pcmcia, aha152x_ids); static struct pcmcia_driver aha152x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "aha152x_cs", - }, + .name = "aha152x_cs", .probe = aha152x_probe, .remove = aha152x_detach, .id_table = aha152x_ids, @@ -244,7 +229,6 @@ static int __init init_aha152x_cs(void) static void __exit exit_aha152x_cs(void) { pcmcia_unregister_driver(&aha152x_cs_driver); - BUG_ON(dev_list != NULL); } module_init(init_aha152x_cs); diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 91404068407..714b248f5d5 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,8 +46,6 @@ #include <scsi/scsi_host.h> #include "fdomain.h" -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -63,7 +61,6 @@ MODULE_LICENSE("Dual MPL/GPL"); typedef struct scsi_info_t { struct pcmcia_device *p_dev; - dev_node_t node; struct Scsi_Host *host; } scsi_info_t; @@ -85,13 +82,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return fdomain_config(link); } /* fdomain_attach */ @@ -109,14 +101,13 @@ static void fdomain_detach(struct pcmcia_device *link) /*====================================================================*/ -static int fdomain_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 10; + p_dev->resource[0]->end = 0x10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -133,18 +124,17 @@ static int fdomain_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* A bad hack... */ - release_region(link->io.BasePort1, link->io.NumPorts1); + release_region(link->resource[0]->start, resource_size(link->resource[0])); /* Set configuration options for the fdomain driver */ - sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ); + sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq); fdomain_setup(str); host = __fdomain_16x0_detect(&fdomain_driver_template); @@ -157,8 +147,6 @@ static int fdomain_config(struct pcmcia_device *link) goto failed; scsi_scan_host(host); - sprintf(info->node.dev_name, "scsi%d", host->host_no); - link->dev_node = &info->node; info->host = host; return 0; @@ -190,7 +178,7 @@ static int fdomain_resume(struct pcmcia_device *link) return 0; } -static struct pcmcia_device_id fdomain_ids[] = { +static const struct pcmcia_device_id fdomain_ids[] = { PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "SCSI PCMCIA Card", 0xe3736c88, 0x859cad20), PCMCIA_DEVICE_PROD_ID1("SCSI PCMCIA Adapter Card", 0x8dacb57e), PCMCIA_DEVICE_PROD_ID12(" SIMPLE TECHNOLOGY Corporation", "SCSI PCMCIA Credit Card Controller", 0x182bdafe, 0xc80d106f), @@ -200,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); static struct pcmcia_driver fdomain_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fdomain_cs", - }, + .name = "fdomain_cs", .probe = fdomain_probe, .remove = fdomain_detach, .id_table = fdomain_ids, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index c2341af587a..987fbb1b244 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,8 +47,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_ioctl.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -72,13 +70,13 @@ module_param(nsp_burst_mode, int, 0); MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))"); /* Release IO ports after configuration? */ -static int free_ports = 0; +static bool free_ports = 0; module_param(free_ports, bool, 0); MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))"); static struct scsi_host_template nsp_driver_template = { .proc_name = "nsp_cs", - .proc_info = nsp_proc_info, + .show_info = nsp_show_info, .name = "WorkBit NinjaSCSI-3/32Bi(16bit)", .info = nsp_info, .queuecommand = nsp_queuecommand, @@ -186,7 +184,7 @@ static void nsp_scsi_done(struct scsi_cmnd *SCpnt) SCpnt->scsi_done(SCpnt); } -static int nsp_queuecommand(struct scsi_cmnd *SCpnt, +static int nsp_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { #ifdef NSP_DEBUG @@ -266,6 +264,8 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt, return 0; } +static DEF_SCSI_QCMD(nsp_queuecommand) + /* * setup PIO FIFO transfer mode and enable/disable to data out */ @@ -742,7 +742,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt) res = nsp_fifo_count(SCpnt) - ocount; //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res); - if (res == 0) { /* if some data avilable ? */ + if (res == 0) { /* if some data available ? */ if (stat == BUSPHASE_DATA_IN) { /* phase changed? */ //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual); continue; @@ -1365,33 +1365,19 @@ static const char *nsp_info(struct Scsi_Host *shpnt) } #undef SPRINTF -#define SPRINTF(args...) \ - do { \ - if(length > (pos - buffer)) { \ - pos += snprintf(pos, length - (pos - buffer) + 1, ## args); \ - nsp_dbg(NSP_DEBUG_PROC, "buffer=0x%p pos=0x%p length=%d %d\n", buffer, pos, length, length - (pos - buffer));\ - } \ - } while(0) - -static int nsp_proc_info(struct Scsi_Host *host, char *buffer, char **start, - off_t offset, int length, int inout) +#define SPRINTF(args...) seq_printf(m, ##args) + +static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host) { int id; - char *pos = buffer; - int thislength; int speed; unsigned long flags; nsp_hw_data *data; int hostno; - if (inout) { - return -EINVAL; - } - hostno = host->host_no; data = (nsp_hw_data *)host->hostdata; - SPRINTF("NinjaSCSI status\n\n"); SPRINTF("Driver version: $Revision: 1.23 $\n"); SPRINTF("SCSI host No.: %d\n", hostno); @@ -1458,19 +1444,7 @@ static int nsp_proc_info(struct Scsi_Host *host, char *buffer, char **start, } SPRINTF("\n"); } - - thislength = pos - (buffer + offset); - - if(thislength < 0) { - *start = NULL; - return 0; - } - - - thislength = min(thislength, length); - *start = buffer + offset; - - return thislength; + return 0; } #undef SPRINTF @@ -1532,15 +1506,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) PCMCIA functions **********************************************************************/ -/*====================================================================== - nsp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -======================================================================*/ static int nsp_cs_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -1558,22 +1523,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); - /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; /* not used */ - - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - - /* Interrupt handler */ - link->irq.Handler = &nspintr; - link->irq.Attributes |= IRQF_SHARED; - - /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - ret = nsp_cs_config(link); nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); @@ -1581,12 +1530,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) } /* nsp_cs_attach */ -/*====================================================================== - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -======================================================================*/ static void nsp_cs_detach(struct pcmcia_device *link) { nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); @@ -1599,101 +1542,36 @@ static void nsp_cs_detach(struct pcmcia_device *link) } /* nsp_cs_detach */ -/*====================================================================== - nsp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -======================================================================*/ - -struct nsp_cs_configdata { - nsp_hw_data *data; - win_req_t req; -}; - -static int nsp_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - struct nsp_cs_configdata *cfg_mem = priv_data; + nsp_hw_data *data = priv_data; - if (cfg->index == 0) + if (p_dev->config_index == 0) return -ENODEV; - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) - goto next_entry; - } - - if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - memreq_t map; - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - cfg_mem->req.Attributes |= WIN_ENABLE; - cfg_mem->req.Base = mem->win[0].host_addr; - cfg_mem->req.Size = mem->win[0].len; - if (cfg_mem->req.Size < 0x1000) - cfg_mem->req.Size = 0x1000; - cfg_mem->req.AccessSpeed = 0; - if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0) - goto next_entry; - - cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); - cfg_mem->data->MmioLength = cfg_mem->req.Size; - } - /* If we got this far, we're cool! */ - return 0; + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev) != 0) + goto next_entry; + + if (resource_size(p_dev->resource[2])) { + p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 | + WIN_MEMORY_TYPE_CM | + WIN_ENABLE); + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0) + goto next_entry; + if (pcmcia_map_mem_page(p_dev, p_dev->resource[2], + p_dev->card_addr) != 0) + goto next_entry; + + data->MmioAddress = (unsigned long) + ioremap_nocache(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + data->MmioLength = resource_size(p_dev->resource[2]); } + /* If we got this far, we're cool! */ + return 0; next_entry: nsp_dbg(NSP_DEBUG_INIT, "next"); @@ -1705,42 +1583,41 @@ static int nsp_cs_config(struct pcmcia_device *link) { int ret; scsi_info_t *info = link->priv; - struct nsp_cs_configdata *cfg_mem; struct Scsi_Host *host; nsp_hw_data *data = &nsp_data_base; nsp_dbg(NSP_DEBUG_INIT, "in"); - cfg_mem = kzalloc(sizeof(*cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - cfg_mem->data = data; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_IO; - ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem); + ret = pcmcia_loop_config(link, nsp_cs_config_check, data); + if (ret) goto cs_failed; - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - if (pcmcia_request_irq(link, &link->irq)) - goto cs_failed; - } + if (pcmcia_request_irq(link, nspintr)) + goto cs_failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto cs_failed; if (free_ports) { - if (link->io.BasePort1) { - release_region(link->io.BasePort1, link->io.NumPorts1); + if (link->resource[0]) { + release_region(link->resource[0]->start, + resource_size(link->resource[0])); } - if (link->io.BasePort2) { - release_region(link->io.BasePort2, link->io.NumPorts2); + if (link->resource[1]) { + release_region(link->resource[1]->start, + resource_size(link->resource[1])); } } /* Set port and IRQ */ - data->BaseAddress = link->io.BasePort1; - data->NumAddress = link->io.NumPorts1; - data->IrqNumber = link->irq.AssignedIRQ; + data->BaseAddress = link->resource[0]->start; + data->NumAddress = resource_size(link->resource[0]); + data->IrqNumber = link->irq; nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", data->BaseAddress, data->NumAddress, data->IrqNumber); @@ -1763,48 +1640,18 @@ static int nsp_cs_config(struct pcmcia_device *link) scsi_scan_host(host); - snprintf(info->node.dev_name, sizeof(info->node.dev_name), "scsi%d", host->host_no); - link->dev_node = &info->node; info->host = host; - /* Finally, report what we've done */ - printk(KERN_INFO "nsp_cs: index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) { - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq.AssignedIRQ); - } - if (link->io.NumPorts1) { - printk(", io 0x%04x-0x%04x", link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - } - if (link->io.NumPorts2) - printk(" & 0x%04x-0x%04x", link->io.BasePort2, - link->io.BasePort2+link->io.NumPorts2-1); - if (link->win) - printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, - cfg_mem->req.Base+cfg_mem->req.Size-1); - printk("\n"); - - kfree(cfg_mem); return 0; cs_failed: nsp_dbg(NSP_DEBUG_INIT, "config fail"); nsp_cs_release(link); - kfree(cfg_mem); return -ENODEV; } /* nsp_cs_config */ -/*====================================================================== - After a card is removed, nsp_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -======================================================================*/ static void nsp_cs_release(struct pcmcia_device *link) { scsi_info_t *info = link->priv; @@ -1822,9 +1669,8 @@ static void nsp_cs_release(struct pcmcia_device *link) if (info->host != NULL) { scsi_remove_host(info->host); } - link->dev_node = NULL; - if (link->win) { + if (resource_size(link->resource[2])) { if (data != NULL) { iounmap((void *)(data->MmioAddress)); } @@ -1880,7 +1726,7 @@ static int nsp_cs_resume(struct pcmcia_device *link) /*======================================================================* * module entry point *====================================================================*/ -static struct pcmcia_device_id nsp_cs_ids[] = { +static const struct pcmcia_device_id nsp_cs_ids[] = { PCMCIA_DEVICE_PROD_ID123("IO DATA", "CBSC16 ", "1", 0x547e66dc, 0x0d63a3fd, 0x51de003a), PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-001", "1", 0x534c02bc, 0x52008408, 0x51de003a), PCMCIA_DEVICE_PROD_ID123("KME ", "SCSI-CARD-002", "1", 0x534c02bc, 0xcb09d5b2, 0x51de003a), @@ -1894,9 +1740,7 @@ MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); static struct pcmcia_driver nsp_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nsp_cs", - }, + .name = "nsp_cs", .probe = nsp_cs_probe, .remove = nsp_cs_detach, .id_table = nsp_cs_ids, @@ -1906,14 +1750,11 @@ static struct pcmcia_driver nsp_driver = { static int __init nsp_cs_init(void) { - nsp_msg(KERN_INFO, "loading..."); - return pcmcia_register_driver(&nsp_driver); } static void __exit nsp_cs_exit(void) { - nsp_msg(KERN_INFO, "unloading..."); pcmcia_unregister_driver(&nsp_driver); } diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h index 7db28cd4944..afd64f0adc4 100644 --- a/drivers/scsi/pcmcia/nsp_cs.h +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -187,7 +187,7 @@ #define S_IO BIT(1) /* Input/Output line from SCSI bus */ #define S_CD BIT(2) /* Command/Data line from SCSI bus */ #define S_BUSY BIT(3) /* Busy line from SCSI bus */ -#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ #define S_REQUEST BIT(5) /* Request line from SCSI bus */ #define S_SELECT BIT(6) /* */ #define S_ATN BIT(7) /* */ @@ -224,7 +224,6 @@ typedef struct scsi_info_t { struct pcmcia_device *p_dev; struct Scsi_Host *host; - dev_node_t node; int stop; } scsi_info_t; @@ -293,15 +292,9 @@ static int nsp_cs_config (struct pcmcia_device *link); /* Linux SCSI subsystem specific functions */ static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht); static const char *nsp_info (struct Scsi_Host *shpnt); -static int nsp_proc_info ( - struct Scsi_Host *host, - char *buffer, - char **start, - off_t offset, - int length, - int inout); -static int nsp_queuecommand(struct scsi_cmnd *SCpnt, - void (* done)(struct scsi_cmnd *SCpnt)); +static int nsp_show_info (struct seq_file *m, + struct Scsi_Host *host); +static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); /* Error handler */ /*static int nsp_eh_abort (struct scsi_cmnd *SCpnt);*/ diff --git a/drivers/scsi/pcmcia/nsp_debug.c b/drivers/scsi/pcmcia/nsp_debug.c index 3c6ef64fcbf..6aa7d269d3b 100644 --- a/drivers/scsi/pcmcia/nsp_debug.c +++ b/drivers/scsi/pcmcia/nsp_debug.c @@ -15,7 +15,7 @@ static const char unknown[] = "UNKNOWN"; static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", -/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", +/* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reassign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ unknown, "Recover Buffered Data", "Mode Select", "Reserve", diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index f85f094870b..bcaf89fe0c9 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,8 +48,6 @@ #include <scsi/scsi_host.h> #include "../qlogicfas408.h" -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -82,7 +80,6 @@ static struct scsi_host_template qlogicfas_driver_template = { typedef struct scsi_info_t { struct pcmcia_device *p_dev; - dev_node_t node; struct Scsi_Host *host; unsigned short manf_id; } scsi_info_t; @@ -158,13 +155,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return qlogic_config(link); } /* qlogic_attach */ @@ -182,19 +174,16 @@ static void qlogic_detach(struct pcmcia_device *link) /*====================================================================*/ -static int qlogic_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int qlogic_config(struct pcmcia_device * link) @@ -209,36 +198,33 @@ static int qlogic_config(struct pcmcia_device * link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* The KXL-810AN has a bigger IO port window */ - if (link->io.NumPorts1 == 32) + if (resource_size(link->resource[0]) == 32) host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1 + 16, link->irq.AssignedIRQ); + link->resource[0]->start + 16, link->irq); else host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1, link->irq.AssignedIRQ); + link->resource[0]->start, link->irq); if (!host) { printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); goto failed; } - sprintf(info->node.dev_name, "scsi%d", host->host_no); - link->dev_node = &info->node; info->host = host; return 0; @@ -258,7 +244,7 @@ static void qlogic_release(struct pcmcia_device *link) scsi_remove_host(info->host); - free_irq(link->irq.AssignedIRQ, info->host); + free_irq(link->irq, info->host); pcmcia_disable_device(link); scsi_host_put(info->host); @@ -270,13 +256,13 @@ static int qlogic_resume(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - pcmcia_request_configuration(link, &link->conf); + pcmcia_enable_device(link); if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* Ugggglllyyyy!!! */ qlogicfas408_bus_reset(NULL); @@ -284,7 +270,7 @@ static int qlogic_resume(struct pcmcia_device *link) return 0; } -static struct pcmcia_device_id qlogic_ids[] = { +static const struct pcmcia_device_id qlogic_ids[] = { PCMCIA_DEVICE_PROD_ID12("EIger Labs", "PCMCIA-to-SCSI Adapter", 0x88395fa7, 0x33b7a5e6), PCMCIA_DEVICE_PROD_ID12("EPSON", "SCSI-2 PC Card SC200", 0xd361772f, 0x299d1751), PCMCIA_DEVICE_PROD_ID12("MACNICA", "MIRACLE SCSI-II mPS110", 0x20841b68, 0xab3c3b6d), @@ -308,9 +294,7 @@ MODULE_DEVICE_TABLE(pcmcia, qlogic_ids); static struct pcmcia_driver qlogic_cs_driver = { .owner = THIS_MODULE, - .drv = { .name = "qlogic_cs", - }, .probe = qlogic_probe, .remove = qlogic_detach, .id_table = qlogic_ids, diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index e7564d8f0cb..f5b52731abd 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,8 +71,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_host.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -191,7 +189,6 @@ struct scsi_info_t { struct pcmcia_device *p_dev; - dev_node_t node; struct Scsi_Host *host; unsigned short manf_id; }; @@ -550,7 +547,7 @@ SYM53C500_info(struct Scsi_Host *SChost) } static int -SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +SYM53C500_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { int i; int port_base = SCpnt->device->host->io_port; @@ -586,6 +583,8 @@ SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) return 0; } +static DEF_SCSI_QCMD(SYM53C500_queue) + static int SYM53C500_host_reset(struct scsi_cmnd *SCpnt) { @@ -686,19 +685,16 @@ static struct scsi_host_template sym53c500_driver_template = { .shost_attrs = SYM53C500_shost_attrs }; -static int SYM53C500_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int @@ -719,11 +715,10 @@ SYM53C500_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -736,9 +731,9 @@ SYM53C500_config(struct pcmcia_device *link) (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { /* set ATAcmd */ - outb(0xb4, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0xb4, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* @@ -751,8 +746,8 @@ SYM53C500_config(struct pcmcia_device *link) * 0x130, 0x230, 0x280, 0x290, * 0x320, 0x330, 0x340, 0x350 */ - port_base = link->io.BasePort1; - irq_level = link->irq.AssignedIRQ; + port_base = link->resource[0]->start; + irq_level = link->irq; DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, USE_FAST_PIO);) @@ -793,8 +788,6 @@ SYM53C500_config(struct pcmcia_device *link) */ data->fast_pio = USE_FAST_PIO; - sprintf(info->node.dev_name, "scsi%d", host->host_no); - link->dev_node = &info->node; info->host = host; if (scsi_add_host(host, NULL)) @@ -826,15 +819,15 @@ static int sym53c500_resume(struct pcmcia_device *link) if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { - outb(0x80, link->io.BasePort1 + 0xd); - outb(0x24, link->io.BasePort1 + 0x9); - outb(0x04, link->io.BasePort1 + 0xd); + outb(0x80, link->resource[0]->start + 0xd); + outb(0x24, link->resource[0]->start + 0x9); + outb(0x04, link->resource[0]->start + 0xd); } /* * If things don't work after a "resume", * this is a good place to start looking. */ - SYM53C500_int_host_reset(link->io.BasePort1); + SYM53C500_int_host_reset(link->resource[0]->start); return 0; } @@ -863,12 +856,7 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return SYM53C500_config(link); } /* SYM53C500_attach */ @@ -877,7 +865,7 @@ MODULE_AUTHOR("Bob Tracy <rct@frus.com>"); MODULE_DESCRIPTION("SYM53C500 PCMCIA SCSI driver"); MODULE_LICENSE("GPL"); -static struct pcmcia_device_id sym53c500_ids[] = { +static const struct pcmcia_device_id sym53c500_ids[] = { PCMCIA_DEVICE_PROD_ID12("BASICS by New Media Corporation", "SCSI Sym53C500", 0x23c78a9d, 0x0099e7f7), PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "SCSI Bus Toaster Sym53C500", 0x085a850b, 0x45432eb8), PCMCIA_DEVICE_PROD_ID2("SCSI9000", 0x21648f44), @@ -887,9 +875,7 @@ MODULE_DEVICE_TABLE(pcmcia, sym53c500_ids); static struct pcmcia_driver sym53c500_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sym53c500_cs", - }, + .name = "sym53c500_cs", .probe = SYM53C500_probe, .remove = SYM53C500_detach, .id_table = sym53c500_ids, |