diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_base.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_base.h | 362 |
1 files changed, 311 insertions, 51 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index bb4f14656af..fd3b998c75b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -3,7 +3,7 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt2sas/mpt2_base.h - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2013 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or @@ -69,10 +69,10 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "03.100.03.00" -#define MPT2SAS_MAJOR_VERSION 03 +#define MPT2SAS_DRIVER_VERSION "16.100.00.00" +#define MPT2SAS_MAJOR_VERSION 16 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 03 +#define MPT2SAS_BUILD_VERSION 00 #define MPT2SAS_RELEASE_VERSION 00 /* @@ -101,7 +101,8 @@ #define MPT_NAME_LENGTH 32 /* generic length of strings */ #define MPT_STRING_LENGTH 64 -#define MPT_MAX_CALLBACKS 16 +#define MPT_MAX_CALLBACKS 16 + #define CAN_SLEEP 1 #define NO_SLEEP 0 @@ -119,13 +120,11 @@ #define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ #define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ #define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ -#define MPT2_IOC_RUNNING 4 /* shost running */ /* * logging format */ #define MPT2SAS_FMT "%s: " -#define MPT2SAS_DEBUG_FMT KERN_DEBUG MPT2SAS_FMT #define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT #define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT #define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT @@ -156,6 +155,72 @@ #define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 /* + * Intel HBA branding + */ +#define MPT2SAS_INTEL_RMS25JB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25JB080" +#define MPT2SAS_INTEL_RMS25JB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25JB040" +#define MPT2SAS_INTEL_RMS25KB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25KB080" +#define MPT2SAS_INTEL_RMS25KB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25KB040" +#define MPT2SAS_INTEL_RMS25LB040_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB040" +#define MPT2SAS_INTEL_RMS25LB080_BRANDING \ + "Intel(R) Integrated RAID Module RMS25LB080" +#define MPT2SAS_INTEL_RMS2LL080_BRANDING \ + "Intel Integrated RAID Module RMS2LL080" +#define MPT2SAS_INTEL_RMS2LL040_BRANDING \ + "Intel Integrated RAID Module RMS2LL040" +#define MPT2SAS_INTEL_RS25GB008_BRANDING \ + "Intel(R) RAID Controller RS25GB008" +#define MPT2SAS_INTEL_SSD910_BRANDING \ + "Intel(R) SSD 910 Series" +/* + * Intel HBA SSDIDs + */ +#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516 +#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517 +#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518 +#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519 +#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A +#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B +#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E +#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F +#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000 +#define MPT2SAS_INTEL_SSD910_SSDID 0x3700 + +/* + * HP HBA branding + */ +#define MPT2SAS_HP_3PAR_SSVID 0x1590 +#define MPT2SAS_HP_2_4_INTERNAL_BRANDING "HP H220 Host Bus Adapter" +#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING "HP H221 Host Bus Adapter" +#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter" +#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING "HP H220i Host Bus Adapter" +#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING "HP H210i Host Bus Adapter" + +/* + * HO HBA SSDIDs + */ +#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041 +#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042 +#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043 +#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044 +#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046 + +/* + * WarpDrive Specific Log codes + */ + +#define MPT2_WARPDRIVE_LOGENTRY (0x8002) +#define MPT2_WARPDRIVE_LC_SSDT (0x41) +#define MPT2_WARPDRIVE_LC_SSDLW (0x43) +#define MPT2_WARPDRIVE_LC_SSDLF (0x44) +#define MPT2_WARPDRIVE_LC_BRMF (0x4D) + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 @@ -166,6 +231,7 @@ * struct MPT2SAS_TARGET - starget private hostdata * @starget: starget object * @sas_address: target sas address + * @raid_device: raid_device pointer to access volume data * @handle: device handle * @num_luns: number luns * @flags: MPT_TARGET_FLAGS_XXX flags @@ -175,6 +241,7 @@ struct MPT2SAS_TARGET { struct scsi_target *starget; u64 sas_address; + struct _raid_device *raid_device; u16 handle; int num_luns; u32 flags; @@ -182,6 +249,7 @@ struct MPT2SAS_TARGET { u8 tm_busy; }; + /* * per device private data */ @@ -229,6 +297,12 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_10 { MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10, Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t; +#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003) +#define MFG_PAGE10_HIDE_ALL_DISKS (0x00) +#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01) +#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02) + + struct MPT2SAS_DEVICE { struct MPT2SAS_TARGET *sas_target; unsigned int lun; @@ -249,6 +323,7 @@ struct MPT2SAS_DEVICE { * @mutex: mutex * @done: completion * @reply: reply message pointer + * @sense: sense data * @status: MPT2_CMD_XXX status * @smid: system message id */ @@ -256,20 +331,11 @@ struct _internal_cmd { struct mutex mutex; struct completion done; void *reply; + void *sense; u16 status; u16 smid; }; -/* - * SAS Topology Structures - */ - -#define MPTSAS_STATE_TR_SEND 0x0001 -#define MPTSAS_STATE_TR_COMPLETE 0x0002 -#define MPTSAS_STATE_CNTRL_SEND 0x0004 -#define MPTSAS_STATE_CNTRL_COMPLETE 0x0008 - -#define MPT2SAS_REQ_SAS_CNTRL 0x0010 /** * struct _sas_device - attached device information @@ -287,7 +353,7 @@ struct _internal_cmd { * @id: target id * @channel: target channel * @slot: number number - * @hidden_raid_component: set to 1 when this is a raid member + * @phy: phy identifier provided in sas device page 0 * @responding: used in _scsih_sas_device_mark_responding */ struct _sas_device { @@ -305,9 +371,8 @@ struct _sas_device { int id; int channel; u16 slot; - u8 hidden_raid_component; + u8 phy; u8 responding; - u16 state; }; /** @@ -317,25 +382,43 @@ struct _sas_device { * @sdev: scsi device struct (volumes are single lun) * @wwid: unique identifier for the volume * @handle: device handle + * @block_size: Block size of the volume * @id: target id * @channel: target channel * @volume_type: the raid level * @device_info: bitfield provides detailed info about the hidden components * @num_pds: number of hidden raid components * @responding: used in _scsih_raid_device_mark_responding + * @percent_complete: resync percent complete + * @direct_io_enabled: Whether direct io to PDs are allowed or not + * @stripe_exponent: X where 2powX is the stripe sz in blocks + * @block_exponent: X where 2powX is the block sz in bytes + * @max_lba: Maximum number of LBA in the volume + * @stripe_sz: Stripe Size of the volume + * @device_info: Device info of the volume member disk + * @pd_handle: Array of handles of the physical drives for direct I/O in le16 */ +#define MPT_MAX_WARPDRIVE_PDS 8 struct _raid_device { struct list_head list; struct scsi_target *starget; struct scsi_device *sdev; u64 wwid; u16 handle; + u16 block_sz; int id; int channel; u8 volume_type; - u32 device_info; u8 num_pds; u8 responding; + u8 percent_complete; + u8 direct_io_enabled; + u8 stripe_exponent; + u8 block_exponent; + u64 max_lba; + u32 stripe_sz; + u32 device_info; + u16 pd_handle[MPT_MAX_WARPDRIVE_PDS]; }; /** @@ -376,6 +459,7 @@ struct _sas_port { * @phy_id: unique phy id * @handle: device handle for this phy * @attached_handle: device handle for attached device + * @phy_belongs_to_port: port has been created for this phy */ struct _sas_phy { struct list_head port_siblings; @@ -385,6 +469,7 @@ struct _sas_phy { u8 phy_id; u16 handle; u16 attached_handle; + u8 phy_belongs_to_port; }; /** @@ -426,17 +511,44 @@ enum reset_type { }; /** - * struct request_tracker - firmware request tracker + * struct chain_tracker - firmware chain tracker + * @chain_buffer: chain buffer + * @chain_buffer_dma: physical address + * @tracker_list: list of free request (ioc->free_chain_list) + */ +struct chain_tracker { + void *chain_buffer; + dma_addr_t chain_buffer_dma; + struct list_head tracker_list; +}; + +/** + * struct scsiio_tracker - scsi mf request tracker * @smid: system message id * @scmd: scsi request pointer * @cb_idx: callback index + * @direct_io: To indicate whether I/O is direct (WARPDRIVE) * @chain_list: list of chains associated to this IO * @tracker_list: list of free request (ioc->free_list) */ -struct request_tracker { +struct scsiio_tracker { u16 smid; struct scsi_cmnd *scmd; u8 cb_idx; + u8 direct_io; + struct list_head chain_list; + struct list_head tracker_list; +}; + +/** + * struct request_tracker - firmware request tracker + * @smid: system message id + * @cb_idx: callback index + * @tracker_list: list of free request (ioc->free_list) + */ +struct request_tracker { + u16 smid; + u8 cb_idx; struct list_head tracker_list; }; @@ -454,17 +566,96 @@ struct _tr_list { typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); /** + * struct adapter_reply_queue - the reply queue struct + * @ioc: per adapter object + * @msix_index: msix index into vector table + * @vector: irq vector + * @reply_post_host_index: head index in the pool where FW completes IO + * @reply_post_free: reply post base virt address + * @name: the name registered to request_irq() + * @busy: isr is actively processing replies on another cpu + * @list: this list +*/ +struct adapter_reply_queue { + struct MPT2SAS_ADAPTER *ioc; + u8 msix_index; + unsigned int vector; + u32 reply_post_host_index; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + char name[MPT_NAME_LENGTH]; + atomic_t busy; + struct list_head list; +}; + +/* IOC Facts and Port Facts converted from little endian to cpu */ +union mpi2_version_union { + MPI2_VERSION_STRUCT Struct; + u32 Word; +}; + +struct mpt2sas_facts { + u16 MsgVersion; + u16 HeaderVersion; + u8 IOCNumber; + u8 VP_ID; + u8 VF_ID; + u16 IOCExceptions; + u16 IOCStatus; + u32 IOCLogInfo; + u8 MaxChainDepth; + u8 WhoInit; + u8 NumberOfPorts; + u8 MaxMSIxVectors; + u16 RequestCredit; + u16 ProductID; + u32 IOCCapabilities; + union mpi2_version_union FWVersion; + u16 IOCRequestFrameSize; + u16 Reserved3; + u16 MaxInitiators; + u16 MaxTargets; + u16 MaxSasExpanders; + u16 MaxEnclosures; + u16 ProtocolFlags; + u16 HighPriorityCredit; + u16 MaxReplyDescriptorPostQueueDepth; + u8 ReplyFrameSize; + u8 MaxVolumes; + u16 MaxDevHandle; + u16 MaxPersistentEntries; + u16 MinDevHandle; +}; + +struct mpt2sas_port_facts { + u8 PortNumber; + u8 VP_ID; + u8 VF_ID; + u8 PortType; + u16 MaxPostedCmdBuffers; +}; + +/** + * enum mutex_type - task management mutex type + * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it + * @TM_MUTEX_ON: mutex is required + */ +enum mutex_type { + TM_MUTEX_OFF = 0, + TM_MUTEX_ON = 1, +}; + +typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc); +/** * struct MPT2SAS_ADAPTER - per adapter struct * @list: ioc_list * @shost: shost object * @id: unique adapter id - * @pci_irq: irq number + * @cpu_count: number online cpus * @name: generic ioc string * @tmp_string: tmp string used for logging * @pdev: pci pdev object * @chip: memory mapped register space * @chip_phys: physical addrss prior to mapping - * @pio_chip: I/O mapped register space * @logging_level: see mpt2sas_debug.h * @fwfault_debug: debuging FW timeouts * @ir_firmware: IR firmware present @@ -483,13 +674,20 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @shost_recovery: host reset in progress * @ioc_reset_in_progress_lock: * @ioc_link_reset_in_progress: phy/hard reset in progress - * @ignore_loginfos: ignore loginfos during task managment + * @ignore_loginfos: ignore loginfos during task management * @remove_host: flag for when driver unloads, to avoid sending dev resets - * @wait_for_port_enable_to_complete: + * @pci_error_recovery: flag to prevent ioc access until slot reset completes + * @wait_for_discovery_to_complete: flag set at driver load time when + * waiting on reporting devices + * @is_driver_loading: flag set at driver load time + * @port_enable_failed: flag set when port enable has failed + * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work + * @start_scan_failed: means port enable failed, return's the ioc_status * @msix_enable: flag indicating msix is enabled * @msix_vector_count: number msix vectors - * @msix_table: virt address to the msix table - * @msix_table_backup: backup msix table + * @cpu_msix_table: table for mapping cpus to msix index + * @cpu_msix_table_sz: table size + * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands * @scsi_io_cb_idx: shost generated commands * @tm_cb_idx: task management commands * @scsih_cb_idx: scsih internal commands @@ -497,6 +695,8 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @ctl_cb_idx: clt internal commands * @base_cb_idx: base internal commands * @config_cb_idx: base internal commands + * @tm_tr_cb_idx : device removal target reset handshake + * @tm_tr_volume_cb_idx : volume removal target reset * @base_cmds: * @transport_cmds: * @scsih_cmds: @@ -525,6 +725,10 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @sas_device_lock: * @io_missing_delay: time for IO completed by fw when PDR enabled * @device_missing_delay: time for device missing by fw when PDR enabled + * @sas_id : used for setting volume target IDs + * @blocking_handles: bitmask used to identify which devices need blocking + * @pd_handles : bitmask for PD handles + * @pd_handles_sz : size of pd_handle bitmask * @config_page_sz: config page size * @config_page: reserve memory for config page payload * @config_page_dma: @@ -575,20 +779,22 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @reply_post_queue_depth: reply post queue depth * @reply_post_free: pool for reply post (64bit descriptor) * @reply_post_free_dma: - * @reply_post_free_dma_pool: + * @reply_queue_count: number of reply queue's + * @reply_queue_list: link list contaning the reply queue info * @reply_post_host_index: head index in the pool where FW completes IO + * @delayed_tr_list: target reset link list + * @delayed_tr_volume_list: volume target reset link list */ struct MPT2SAS_ADAPTER { struct list_head list; struct Scsi_Host *shost; u8 id; - u32 pci_irq; + int cpu_count; char name[MPT_NAME_LENGTH]; char tmp_string[MPT_STRING_LENGTH]; struct pci_dev *pdev; Mpi2SystemInterfaceRegs_t __iomem *chip; - unsigned long chip_phys; - unsigned long pio_chip; + resource_size_t chip_phys; int logging_level; int fwfault_debug; u8 ir_firmware; @@ -603,24 +809,39 @@ struct MPT2SAS_ADAPTER { /* fw event handler */ char firmware_event_name[20]; struct workqueue_struct *firmware_event_thread; - u8 fw_events_off; spinlock_t fw_event_lock; struct list_head fw_event_list; /* misc flags */ int aen_event_read_flag; u8 broadcast_aen_busy; + u16 broadcast_aen_pending; u8 shost_recovery; + + struct mutex reset_in_progress_mutex; spinlock_t ioc_reset_in_progress_lock; u8 ioc_link_reset_in_progress; + u8 ioc_reset_in_progress_status; + u8 ignore_loginfos; u8 remove_host; - u8 wait_for_port_enable_to_complete; + u8 pci_error_recovery; + u8 wait_for_discovery_to_complete; + struct completion port_enable_done; + u8 is_driver_loading; + u8 port_enable_failed; + + u8 start_scan; + u16 start_scan_failed; u8 msix_enable; u16 msix_vector_count; - u32 *msix_table; - u32 *msix_table_backup; + u8 *cpu_msix_table; + resource_size_t **reply_post_host_index; + u16 cpu_msix_table_sz; + u32 ioc_reset_count; + MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; + u32 non_operational_loop; /* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -629,10 +850,13 @@ struct MPT2SAS_ADAPTER { u8 scsih_cb_idx; u8 ctl_cb_idx; u8 base_cb_idx; + u8 port_enable_cb_idx; u8 config_cb_idx; u8 tm_tr_cb_idx; + u8 tm_tr_volume_cb_idx; u8 tm_sas_control_cb_idx; struct _internal_cmd base_cmds; + struct _internal_cmd port_enable_cmds; struct _internal_cmd transport_cmds; struct _internal_cmd scsih_cmds; struct _internal_cmd tm_cmds; @@ -648,8 +872,8 @@ struct MPT2SAS_ADAPTER { u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /* static config pages */ - Mpi2IOCFactsReply_t facts; - Mpi2PortFactsReply_t *pfacts; + struct mpt2sas_facts facts; + struct mpt2sas_port_facts *pfacts; Mpi2ManufacturingPage0_t manu_pg0; Mpi2BiosPage2_t bios_pg2; Mpi2BiosPage3_t bios_pg3; @@ -673,6 +897,9 @@ struct MPT2SAS_ADAPTER { u8 io_missing_delay; u16 device_missing_delay; int sas_id; + void *blocking_handles; + void *pd_handles; + u16 pd_handles_sz; /* config page */ u16 config_page_sz; @@ -687,20 +914,23 @@ struct MPT2SAS_ADAPTER { u8 *request; dma_addr_t request_dma; u32 request_dma_sz; - struct request_tracker *scsi_lookup; - spinlock_t scsi_lookup_lock; + struct scsiio_tracker *scsi_lookup; + ulong scsi_lookup_pages; + spinlock_t scsi_lookup_lock; struct list_head free_list; int pending_io_count; wait_queue_head_t reset_wq; /* chain */ - u8 *chain; - dma_addr_t chain_dma; + struct chain_tracker *chain_lookup; + struct list_head free_chain_list; + struct dma_pool *chain_dma_pool; + ulong chain_pages; u16 max_sges_in_main_message; u16 max_sges_in_chain_message; u16 chains_needed_per_io; u16 chain_offset_value_for_main_message; - u16 chain_depth; + u32 chain_depth; /* hi-priority queue */ u16 hi_priority_smid; @@ -727,11 +957,13 @@ struct MPT2SAS_ADAPTER { u16 reply_sz; u8 *reply; dma_addr_t reply_dma; + u32 reply_dma_max_address; + u32 reply_dma_min_address; struct dma_pool *reply_dma_pool; /* reply free queue */ u16 reply_free_queue_depth; - u32 *reply_free; + __le32 *reply_free; dma_addr_t reply_free_dma; struct dma_pool *reply_free_dma_pool; u32 reply_free_host_index; @@ -741,9 +973,11 @@ struct MPT2SAS_ADAPTER { Mpi2ReplyDescriptorsUnion_t *reply_post_free; dma_addr_t reply_post_free_dma; struct dma_pool *reply_post_free_dma_pool; - u32 reply_post_host_index; + u8 reply_queue_count; + struct list_head reply_queue_list; struct list_head delayed_tr_list; + struct list_head delayed_tr_volume_list; /* diag buffer support */ u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; @@ -754,6 +988,13 @@ struct MPT2SAS_ADAPTER { Mpi2ManufacturingPage10_t manu_pg10; u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 ring_buffer_offset; + u32 ring_buffer_sz; + u8 is_warpdrive; + u8 hide_ir_msg; + u8 mfg_pg10_hide_flag; + u8 hide_drives; + }; typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, @@ -777,6 +1018,7 @@ void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid); void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr); __le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc); /* hi-priority queue */ u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); @@ -797,6 +1039,8 @@ void mpt2sas_base_release_callback_handler(u8 cb_idx); u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); +u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply); void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); @@ -811,13 +1055,22 @@ void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_ty void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc, + u16 device_missing_delay, u8 io_missing_delay); + +int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc); + /* scsih shared API */ -u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, +void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); -void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, - u8 type, u16 smid_task, ulong timeout); +int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, + uint channel, uint id, uint lun, u8 type, u16 smid_task, + ulong timeout, enum mutex_type m_type); void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address); +void mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address); struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER @@ -825,6 +1078,8 @@ struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAP struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address( struct MPT2SAS_ADAPTER *ioc, u64 sas_address); +void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc); + void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); /* config shared API */ @@ -851,8 +1106,12 @@ int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz); int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page); int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t @@ -885,7 +1144,7 @@ void mpt2sas_ctl_exit(void); u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); -u8 mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, +void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, Mpi2EventNotificationReply_t *mpi_reply); @@ -911,6 +1170,7 @@ extern struct scsi_transport_template *mpt2sas_transport_template; extern int scsi_internal_device_block(struct scsi_device *sdev); extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); -extern int scsi_internal_device_unblock(struct scsi_device *sdev); +extern int scsi_internal_device_unblock(struct scsi_device *sdev, + enum scsi_device_state new_state); #endif /* MPT2SAS_BASE_H_INCLUDED */ |