aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt2sas/mpt2sas_base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_base.c')
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c596
1 files changed, 423 insertions, 173 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 81209ca8727..8b88118e20e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3,7 +3,7 @@
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2010 LSI Corporation
+ * Copyright (C) 2007-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
@@ -57,6 +57,7 @@
#include <linux/sort.h>
#include <linux/io.h>
#include <linux/time.h>
+#include <linux/kthread.h>
#include <linux/aer.h>
#include "mpt2sas_base.h"
@@ -65,6 +66,8 @@ static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
+#define MAX_HBA_QUEUE_DEPTH 30000
+#define MAX_CHAIN_DEPTH 100000
static int max_queue_depth = -1;
module_param(max_queue_depth, int, 0);
MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
@@ -77,25 +80,9 @@ static int msix_disable = -1;
module_param(msix_disable, int, 0);
MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
-/* diag_buffer_enable is bitwise
- * bit 0 set = TRACE
- * bit 1 set = SNAPSHOT
- * bit 2 set = EXTENDED
- *
- * Either bit can be set, or both
- */
-static int diag_buffer_enable;
-module_param(diag_buffer_enable, int, 0);
-MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
- "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-
static int mpt2sas_fwfault_debug;
MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
- "and halt firmware - (default=0)");
+ "and halt firmware - (default=0)");
static int disable_discovery = -1;
module_param(disable_discovery, int, 0);
@@ -119,10 +106,34 @@ _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
ioc->fwfault_debug = mpt2sas_fwfault_debug;
return 0;
}
+
module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
param_get_int, &mpt2sas_fwfault_debug, 0644);
/**
+ * mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
+ * @arg: input argument, used to derive ioc
+ *
+ * Return 0 if controller is removed from pci subsystem.
+ * Return -1 for other case.
+ */
+static int mpt2sas_remove_dead_ioc_func(void *arg)
+{
+ struct MPT2SAS_ADAPTER *ioc = (struct MPT2SAS_ADAPTER *)arg;
+ struct pci_dev *pdev;
+
+ if ((ioc == NULL))
+ return -1;
+
+ pdev = ioc->pdev;
+ if ((pdev == NULL))
+ return -1;
+ pci_stop_and_remove_bus_device_locked(pdev);
+ return 0;
+}
+
+
+/**
* _base_fault_reset_work - workq handling ioc fault conditions
* @work: input argument, used to derive ioc
* Context: sleep.
@@ -137,13 +148,63 @@ _base_fault_reset_work(struct work_struct *work)
unsigned long flags;
u32 doorbell;
int rc;
+ struct task_struct *p;
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery)
goto rearm_timer;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
doorbell = mpt2sas_base_get_iocstate(ioc, 0);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) {
+ printk(MPT2SAS_INFO_FMT "%s : SAS host is non-operational !!!!\n",
+ ioc->name, __func__);
+
+ /* It may be possible that EEH recovery can resolve some of
+ * pci bus failure issues rather removing the dead ioc function
+ * by considering controller is in a non-operational state. So
+ * here priority is given to the EEH recovery. If it doesn't
+ * not resolve this issue, mpt2sas driver will consider this
+ * controller to non-operational state and remove the dead ioc
+ * function.
+ */
+ if (ioc->non_operational_loop++ < 5) {
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ goto rearm_timer;
+ }
+
+ /*
+ * Call _scsih_flush_pending_cmds callback so that we flush all
+ * pending commands back to OS. This call is required to aovid
+ * deadlock at block layer. Dead IOC will fail to do diag reset,
+ * and this call is safe since dead ioc will never return any
+ * command back from HW.
+ */
+ ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+ /*
+ * Set remove_host flag early since kernel thread will
+ * take some time to execute.
+ */
+ ioc->remove_host = 1;
+ /*Remove the Dead Host */
+ p = kthread_run(mpt2sas_remove_dead_ioc_func, ioc,
+ "mpt2sas_dead_ioc_%d", ioc->id);
+ if (IS_ERR(p)) {
+ printk(MPT2SAS_ERR_FMT
+ "%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
+ ioc->name, __func__);
+ } else {
+ printk(MPT2SAS_ERR_FMT
+ "%s: Running mpt2sas_dead_ioc thread success !!!!\n",
+ ioc->name, __func__);
+ }
+
+ return; /* don't rearm timer */
+ }
+
+ ioc->non_operational_loop = 0;
+
if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
@@ -608,7 +669,7 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
return;
/* eat the loginfos associated with task aborts */
- if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
+ if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
return;
@@ -650,6 +711,11 @@ _base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u16 ioc_status;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (unlikely(!mpi_reply)) {
+ printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
@@ -691,6 +757,7 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
}
ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
+
complete(&ioc->base_cmds.done);
return 1;
}
@@ -701,10 +768,9 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
- * Return 1 meaning mf should be freed from _base_interrupt
- * 0 means the mf is freed from this function.
+ * Returns void.
*/
-static u8
+static void
_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
@@ -713,9 +779,9 @@ _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (!mpi_reply)
- return 1;
+ return;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
- return 1;
+ return;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
_base_display_event_data(ioc, mpi_reply);
#endif
@@ -745,7 +811,7 @@ _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
/* ctl callback handler */
mpt2sas_ctl_event_callback(ioc, msix_index, reply);
- return 1;
+ return;
}
/**
@@ -880,16 +946,18 @@ _base_interrupt(int irq, void *bus_id)
else if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
goto next;
- if (smid)
+ if (smid) {
cb_idx = _base_get_cb_idx(ioc, smid);
- if (smid && cb_idx != 0xFF) {
- rc = mpt_callbacks[cb_idx](ioc, smid, msix_index,
- reply);
+ if ((likely(cb_idx < MPT_MAX_CALLBACKS))
+ && (likely(mpt_callbacks[cb_idx] != NULL))) {
+ rc = mpt_callbacks[cb_idx](ioc, smid,
+ msix_index, reply);
if (reply)
- _base_display_reply_info(ioc, smid, msix_index,
- reply);
+ _base_display_reply_info(ioc, smid,
+ msix_index, reply);
if (rc)
mpt2sas_base_free_smid(ioc, smid);
+ }
}
if (!smid)
_base_async_event(ioc, msix_index, reply);
@@ -1152,6 +1220,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
u16 message_control;
+ /* Check whether controller SAS2008 B0 controller,
+ if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == 0x01) {
+ return -EINVAL;
+ }
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
@@ -1333,8 +1408,6 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
int i;
u8 try_msix = 0;
- INIT_LIST_HEAD(&ioc->reply_queue_list);
-
if (msix_disable == -1 || msix_disable == 0)
try_msix = 1;
@@ -1344,7 +1417,7 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
if (_base_check_enable_msix(ioc) != 0)
goto try_ioapic;
- ioc->reply_queue_count = min_t(u8, ioc->cpu_count,
+ ioc->reply_queue_count = min_t(int, ioc->cpu_count,
ioc->msix_vector_count);
entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry),
@@ -1413,6 +1486,7 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
if (pci_enable_device_mem(pdev)) {
printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
"failed\n", ioc->name);
+ ioc->bars = 0;
return -ENODEV;
}
@@ -1421,6 +1495,7 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
MPT2SAS_DRIVER_NAME)) {
printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
"failed\n", ioc->name);
+ ioc->bars = 0;
r = -ENODEV;
goto out_fail;
}
@@ -1664,14 +1739,14 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
list_for_each_entry_safe(chain_req, next,
&ioc->scsi_lookup[i].chain_list, tracker_list) {
list_del_init(&chain_req->tracker_list);
- list_add_tail(&chain_req->tracker_list,
+ list_add(&chain_req->tracker_list,
&ioc->free_chain_list);
}
}
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL;
ioc->scsi_lookup[i].direct_io = 0;
- list_add_tail(&ioc->scsi_lookup[i].tracker_list,
+ list_add(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -1689,13 +1764,13 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
/* hi-priority */
i = smid - ioc->hi_priority_smid;
ioc->hpr_lookup[i].cb_idx = 0xFF;
- list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+ list_add(&ioc->hpr_lookup[i].tracker_list,
&ioc->hpr_free_list);
} else if (smid <= ioc->hba_queue_depth) {
/* internal queue */
i = smid - ioc->internal_smid;
ioc->internal_lookup[i].cb_idx = 0xFF;
- list_add_tail(&ioc->internal_lookup[i].tracker_list,
+ list_add(&ioc->internal_lookup[i].tracker_list,
&ioc->internal_free_list);
}
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -1735,7 +1810,7 @@ static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
static inline u8
_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
{
- return ioc->cpu_msix_table[smp_processor_id()];
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
}
/**
@@ -1914,6 +1989,10 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
MPT2SAS_INTEL_RMS2LL040_BRANDING);
break;
+ case MPT2SAS_INTEL_SSD910_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_SSD910_BRANDING);
+ break;
default:
break;
}
@@ -1923,6 +2002,30 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
MPT2SAS_INTEL_RS25GB008_BRANDING);
break;
+ case MPT2SAS_INTEL_RMS25JB080_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB040_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB080_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB040_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB040_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB080_SSDID:
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB080_BRANDING);
+ break;
default:
break;
}
@@ -1990,12 +2093,10 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
{
int i = 0;
char desc[16];
- u8 revision;
u32 iounit_pg1_flags;
u32 bios_version;
bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
- pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
strncpy(desc, ioc->manu_pg0.ChipName, 16);
printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
"ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
@@ -2004,7 +2105,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
ioc->facts.FWVersion.Word & 0x000000FF,
- revision,
+ ioc->pdev->revision,
(bios_version & 0xFF000000) >> 24,
(bios_version & 0x00FF0000) >> 16,
(bios_version & 0x0000FF00) >> 8,
@@ -2093,7 +2194,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
}
/**
- * _base_update_missing_delay - change the missing delay timers
+ * mpt2sas_base_update_missing_delay - change the missing delay timers
* @ioc: per adapter object
* @device_missing_delay: amount of time till device is reported missing
* @io_missing_delay: interval IO is returned when there is a missing device
@@ -2104,8 +2205,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
* delay, as well as the io missing delay. This should be called at driver
* load time.
*/
-static void
-_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+void
+mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
u16 device_missing_delay, u8 io_missing_delay)
{
u16 dmd, dmd_new, dmd_orignal;
@@ -2309,8 +2410,6 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
}
if (ioc->chain_dma_pool)
pci_pool_destroy(ioc->chain_dma_pool);
- }
- if (ioc->chain_lookup) {
free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
ioc->chain_lookup = NULL;
}
@@ -2328,9 +2427,7 @@ static int
_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
struct mpt2sas_facts *facts;
- u32 queue_size, queue_diff;
u16 max_sge_elements;
- u16 num_of_reply_frames;
u16 chains_needed_per_io;
u32 sz, total_sz, reply_post_free_sz;
u32 retry_sz;
@@ -2353,11 +2450,15 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
/* command line tunables for max controller queue depth */
- if (max_queue_depth != -1)
- max_request_credit = (max_queue_depth < facts->RequestCredit)
- ? max_queue_depth : facts->RequestCredit;
- else
- max_request_credit = facts->RequestCredit;
+ if (max_queue_depth != -1 && max_queue_depth != 0) {
+ max_request_credit = min_t(u16, max_queue_depth +
+ ioc->hi_priority_depth + ioc->internal_depth,
+ facts->RequestCredit);
+ if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+ max_request_credit = MAX_HBA_QUEUE_DEPTH;
+ } else
+ max_request_credit = min_t(u16, facts->RequestCredit,
+ MAX_HBA_QUEUE_DEPTH);
ioc->hba_queue_depth = max_request_credit;
ioc->hi_priority_depth = facts->HighPriorityCredit;
@@ -2398,50 +2499,27 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
ioc->chains_needed_per_io = chains_needed_per_io;
- /* reply free queue sizing - taking into account for events */
- num_of_reply_frames = ioc->hba_queue_depth + 32;
+ /* reply free queue sizing - taking into account for 64 FW events */
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
- /* number of replies frames can't be a multiple of 16 */
- /* decrease number of reply frames by 1 */
- if (!(num_of_reply_frames % 16))
- num_of_reply_frames--;
+ /* calculate reply descriptor post queue depth */
+ ioc->reply_post_queue_depth = ioc->hba_queue_depth +
+ ioc->reply_free_queue_depth + 1;
+ /* align the reply post queue on the next 16 count boundary */
+ if (ioc->reply_post_queue_depth % 16)
+ ioc->reply_post_queue_depth += 16 -
+ (ioc->reply_post_queue_depth % 16);
- /* calculate number of reply free queue entries
- * (must be multiple of 16)
- */
-
- /* (we know reply_free_queue_depth is not a multiple of 16) */
- queue_size = num_of_reply_frames;
- queue_size += 16 - (queue_size % 16);
- ioc->reply_free_queue_depth = queue_size;
- /* reply descriptor post queue sizing */
- /* this size should be the number of request frames + number of reply
- * frames
- */
-
- queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1;
- /* round up to 16 byte boundary */
- if (queue_size % 16)
- queue_size += 16 - (queue_size % 16);
-
- /* check against IOC maximum reply post queue depth */
- if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) {
- queue_diff = queue_size -
- facts->MaxReplyDescriptorPostQueueDepth;
-
- /* round queue_diff up to multiple of 16 */
- if (queue_diff % 16)
- queue_diff += 16 - (queue_diff % 16);
-
- /* adjust hba_queue_depth, reply_free_queue_depth,
- * and queue_size
- */
- ioc->hba_queue_depth -= (queue_diff / 2);
- ioc->reply_free_queue_depth -= (queue_diff / 2);
- queue_size = facts->MaxReplyDescriptorPostQueueDepth;
+ if (ioc->reply_post_queue_depth >
+ facts->MaxReplyDescriptorPostQueueDepth) {
+ ioc->reply_post_queue_depth =
+ facts->MaxReplyDescriptorPostQueueDepth -
+ (facts->MaxReplyDescriptorPostQueueDepth % 16);
+ ioc->hba_queue_depth =
+ ((ioc->reply_post_queue_depth - 64) / 2) - 1;
+ ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
}
- ioc->reply_post_queue_depth = queue_size;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
"sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
@@ -2455,7 +2533,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
/* set the scsi host can_queue depth
* with some internal commands that could be outstanding
*/
- ioc->shost->can_queue = ioc->scsiio_depth - (2);
+ ioc->shost->can_queue = ioc->scsiio_depth;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
"can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
@@ -2527,15 +2605,17 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
"depth(%d)\n", ioc->name, ioc->request,
ioc->scsiio_depth));
- /* loop till the allocation succeeds */
- do {
- sz = ioc->chain_depth * sizeof(struct chain_tracker);
- ioc->chain_pages = get_order(sz);
- ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
- GFP_KERNEL, ioc->chain_pages);
- if (ioc->chain_lookup == NULL)
- ioc->chain_depth -= 100;
- } while (ioc->chain_lookup == NULL);
+ ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH);
+ sz = ioc->chain_depth * sizeof(struct chain_tracker);
+ ioc->chain_pages = get_order(sz);
+
+ ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
+ GFP_KERNEL, ioc->chain_pages);
+ if (!ioc->chain_lookup) {
+ printk(MPT2SAS_ERR_FMT "chain_lookup: get_free_pages failed, "
+ "sz(%d)\n", ioc->name, (int)sz);
+ goto out;
+ }
ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
ioc->request_sz, 16, 0);
if (!ioc->chain_dma_pool) {
@@ -3134,8 +3214,8 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
ioc->ioc_link_reset_in_progress = 1;
- mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
+ mpt2sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
@@ -3236,8 +3316,8 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
- mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
+ mpt2sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
@@ -3301,7 +3381,7 @@ _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
}
pfacts = &ioc->pfacts[port];
- memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t));
+ memset(pfacts, 0, sizeof(struct mpt2sas_port_facts));
pfacts->PortNumber = mpi_reply.PortNumber;
pfacts->VP_ID = mpi_reply.VP_ID;
pfacts->VF_ID = mpi_reply.VF_ID;
@@ -3343,7 +3423,7 @@ _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
facts = &ioc->facts;
- memset(facts, 0, sizeof(Mpi2IOCFactsReply_t));
+ memset(facts, 0, sizeof(struct mpt2sas_facts));
facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
facts->VP_ID = mpi_reply.VP_ID;
@@ -3470,6 +3550,58 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
}
/**
+ * mpt2sas_port_enable_done - command completion routine for port enable
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+u8
+mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+ u16 ioc_status;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
+ return 1;
+
+ if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
+ return 1;
+
+ ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
+ if (mpi_reply) {
+ ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
+ memcpy(ioc->port_enable_cmds.reply, mpi_reply,
+ mpi_reply->MsgLength*4);
+ }
+ ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
+
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ ioc->port_enable_failed = 1;
+
+ if (ioc->is_driver_loading) {
+ if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
+ mpt2sas_port_enable_complete(ioc);
+ return 1;
+ } else {
+ ioc->start_scan_failed = ioc_status;
+ ioc->start_scan = 0;
+ return 1;
+ }
+ }
+ complete(&ioc->port_enable_cmds.done);
+ return 1;
+}
+
+
+/**
* _base_send_port_enable - send port_enable(discovery stuff) to firmware
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3480,67 +3612,151 @@ static int
_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2PortEnableRequest_t *mpi_request;
- u32 ioc_state;
+ Mpi2PortEnableReply_t *mpi_reply;
unsigned long timeleft;
int r = 0;
u16 smid;
+ u16 ioc_status;
printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
- if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
ioc->name, __func__);
return -EAGAIN;
}
- smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
return -EAGAIN;
}
- ioc->base_cmds.status = MPT2_CMD_PENDING;
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
- ioc->base_cmds.smid = smid;
+ ioc->port_enable_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
- mpi_request->VF_ID = 0; /* TODO */
- mpi_request->VP_ID = 0;
+ init_completion(&ioc->port_enable_cmds.done);
mpt2sas_base_put_smid_default(ioc, smid);
- init_completion(&ioc->base_cmds.done);
- timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
+ timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
300*HZ);
- if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
+ if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2PortEnableRequest_t)/4);
- if (ioc->base_cmds.status & MPT2_CMD_RESET)
+ if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
r = -EFAULT;
else
r = -ETIME;
goto out;
- } else
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
- ioc->name, __func__));
+ }
+ mpi_reply = ioc->port_enable_cmds.reply;
- ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
- 60, sleep_flag);
- if (ioc_state) {
- printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
- " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
+ ioc->name, __func__, ioc_status);
r = -EFAULT;
+ goto out;
}
out:
- ioc->base_cmds.status = MPT2_CMD_NOT_USED;
- printk(MPT2SAS_INFO_FMT "port enable: %s\n",
- ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+ printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
+ "SUCCESS" : "FAILED"));
return r;
}
/**
+ * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
+ * @ioc: per adapter object
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2PortEnableRequest_t *mpi_request;
+ u16 smid;
+
+ printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
+
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return -EAGAIN;
+ }
+
+ ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->port_enable_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+
+ mpt2sas_base_put_smid_default(ioc, smid);
+ return 0;
+}
+
+/**
+ * _base_determine_wait_on_discovery - desposition
+ * @ioc: per adapter object
+ *
+ * Decide whether to wait on discovery to complete. Used to either
+ * locate boot device, or report volumes ahead of physical devices.
+ *
+ * Returns 1 for wait, 0 for don't wait
+ */
+static int
+_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
+{
+ /* We wait for discovery to complete if IR firmware is loaded.
+ * The sas topology events arrive before PD events, so we need time to
+ * turn on the bit in ioc->pd_handles to indicate PD
+ * Also, it maybe required to report Volumes ahead of physical
+ * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
+ */
+ if (ioc->ir_firmware)
+ return 1;
+
+ /* if no Bios, then we don't need to wait */
+ if (!ioc->bios_pg3.BiosVersion)
+ return 0;
+
+ /* Bios is present, then we drop down here.
+ *
+ * If there any entries in the Bios Page 2, then we wait
+ * for discovery to complete.
+ */
+
+ /* Current Boot Device */
+ if ((ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Request Boot Device */
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
+ /* Alternate Request Boot Device */
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK) ==
+ MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
+ return 0;
+
+ return 1;
+}
+
+
+/**
* _base_unmask_events - turn on notification for this event
* @ioc: per adapter object
* @event: firmware event
@@ -3608,8 +3824,8 @@ _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mpi_request->EventMasks[i] =
cpu_to_le32(ioc->event_masks[i]);
- mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
+ mpt2sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
@@ -3721,11 +3937,15 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
&ioc->chip->HostDiagnostic);
- /* don't access any registers for 50 milliseconds */
- msleep(50);
+ /* This delay allows the chip PCIe hardware time to finish reset tasks*/
+ if (sleep_flag == CAN_SLEEP)
+ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+ else
+ mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
- /* 300 second max wait */
- for (count = 0; count < 3000000 ; count++) {
+ /* Approximately 300 second max wait */
+ for (count = 0; count < (300000000 /
+ MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
host_diagnostic = readl(&ioc->chip->HostDiagnostic);
@@ -3734,11 +3954,13 @@ _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
break;
- /* wait 100 msec */
+ /* Wait to pass the second read delay window */
if (sleep_flag == CAN_SLEEP)
- msleep(1);
+ msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ /1000);
else
- mdelay(1);
+ mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ /1000);
}
if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
@@ -3924,7 +4146,8 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
ioc->reply_free[i] = cpu_to_le32(reply_address);
/* initialize reply queues */
- _base_assign_reply_queues(ioc);
+ if (ioc->is_driver_loading)
+ _base_assign_reply_queues(ioc);
/* initialize Reply Post Free Queue */
reply_post_free = (long)ioc->reply_post_free;
@@ -3962,6 +4185,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
skip_init_reply_post_host_index:
_base_unmask_interrupts(ioc);
+
r = _base_event_notification(ioc, sleep_flag);
if (r)
return r;
@@ -3969,22 +4193,20 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
- if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
- if (ioc->manu_pg10.OEMIdentifier == 0x80) {
- hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
+
+ if (ioc->is_driver_loading) {
+ if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+ == 0x80) {
+ hide_flag = (u8) (
+ le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
MFG_PAGE10_HIDE_SSDS_MASK);
if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
ioc->mfg_pg10_hide_flag = hide_flag;
}
+ ioc->wait_for_discovery_to_complete =
+ _base_determine_wait_on_discovery(ioc);
+ return r; /* scan_start and scan_finished support */
}
-
- if (ioc->wait_for_port_enable_to_complete) {
- if (diag_buffer_enable != 0)
- mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
- if (disable_discovery > 0)
- return r;
- }
-
r = _base_send_port_enable(ioc, sleep_flag);
if (r)
return r;
@@ -4006,18 +4228,25 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
- _base_mask_interrupts(ioc);
- ioc->shost_recovery = 1;
- _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
- ioc->shost_recovery = 0;
+ if (ioc->chip_phys && ioc->chip) {
+ _base_mask_interrupts(ioc);
+ ioc->shost_recovery = 1;
+ _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+ ioc->shost_recovery = 0;
+ }
+
_base_free_irq(ioc);
_base_disable_msix(ioc);
- if (ioc->chip_phys)
+
+ if (ioc->chip_phys && ioc->chip)
iounmap(ioc->chip);
ioc->chip_phys = 0;
- pci_release_selected_regions(ioc->pdev, ioc->bars);
- pci_disable_pcie_error_reporting(pdev);
- pci_disable_device(pdev);
+
+ if (pci_is_enabled(pdev)) {
+ pci_release_selected_regions(ioc->pdev, ioc->bars);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ }
return;
}
@@ -4063,7 +4292,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
r = mpt2sas_base_map_resources(ioc);
if (r)
- return r;
+ goto out_free_resources;
if (ioc->is_warpdrive) {
ioc->reply_post_host_index[0] =
@@ -4085,7 +4314,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
goto out_free_resources;
ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
- sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
+ sizeof(struct mpt2sas_port_facts), GFP_KERNEL);
if (!ioc->pfacts) {
r = -ENOMEM;
goto out_free_resources;
@@ -4102,7 +4331,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
goto out_free_resources;
init_waitqueue_head(&ioc->reset_wq);
-
/* allocate memory pd handle bitmask list */
ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
if (ioc->facts.MaxDevHandle % 8)
@@ -4113,7 +4341,12 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
r = -ENOMEM;
goto out_free_resources;
}
-
+ ioc->blocking_handles = kzalloc(ioc->pd_handles_sz,
+ GFP_KERNEL);
+ if (!ioc->blocking_handles) {
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
ioc->fwfault_debug = mpt2sas_fwfault_debug;
/* base internal command bits */
@@ -4121,6 +4354,10 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+ /* port_enable command bits */
+ ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
+ ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
+
/* transport internal command bits */
ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
@@ -4162,8 +4399,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
goto out_free_resources;
}
- init_completion(&ioc->shost_recovery_done);
-
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
ioc->event_masks[i] = -1;
@@ -4182,11 +4417,8 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
if (r)
goto out_free_resources;
- if (missing_delay[0] != -1 && missing_delay[1] != -1)
- _base_update_missing_delay(ioc, missing_delay[0],
- missing_delay[1]);
+ ioc->non_operational_loop = 0;
- mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
@@ -4199,11 +4431,13 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
if (ioc->is_warpdrive)
kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->scsih_cmds.reply);
kfree(ioc->config_cmds.reply);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->pfacts);
@@ -4239,10 +4473,12 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
if (ioc->is_warpdrive)
kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
+ kfree(ioc->blocking_handles);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->ctl_cmds.sense);
kfree(ioc->base_cmds.reply);
+ kfree(ioc->port_enable_cmds.reply);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->scsih_cmds.reply);
@@ -4284,6 +4520,20 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
complete(&ioc->base_cmds.done);
}
+ if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+ ioc->port_enable_failed = 1;
+ ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
+ mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
+ if (ioc->is_driver_loading) {
+ ioc->start_scan_failed =
+ MPI2_IOCSTATUS_INTERNAL_ERROR;
+ ioc->start_scan = 0;
+ ioc->port_enable_cmds.status =
+ MPT2_CMD_NOT_USED;
+ } else
+ complete(&ioc->port_enable_cmds.done);
+
+ }
if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
ioc->config_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
@@ -4349,7 +4599,6 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
{
int r;
unsigned long flags;
- u8 pe_complete = ioc->wait_for_port_enable_to_complete;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
@@ -4358,7 +4607,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
ioc->name, __func__);
r = 0;
- goto out;
+ goto out_unlocked;
}
if (mpt2sas_fwfault_debug)
@@ -4396,7 +4645,8 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
/* If this hard reset is called while port enable is active, then
* there is no reason to call make_ioc_operational
*/
- if (pe_complete) {
+ if (ioc->is_driver_loading && ioc->port_enable_failed) {
+ ioc->remove_host = 1;
r = -EFAULT;
goto out;
}
@@ -4410,10 +4660,10 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->ioc_reset_in_progress_status = r;
ioc->shost_recovery = 0;
- complete(&ioc->shost_recovery_done);
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
+ out_unlocked:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
__func__));
return r;