diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 38 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 329 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_history.txt | 384 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 17 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 172 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 75 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 9 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 23 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_type.h | 2 |
9 files changed, 560 insertions, 489 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 8be75e65f76..7b14a015c90 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.16 + * mpi2.h Version: 02.00.28 * * Version History * --------------- @@ -63,6 +63,21 @@ * function codes, 0xF0 to 0xFF. * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. * Added alternative defines for the SGE Direction bit. + * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. + * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. + * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. + * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. + * Added Hard Reset delay timings. + * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -88,7 +103,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x10) +#define MPI2_HEADER_VERSION_UNIT (0x1C) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -266,6 +281,11 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS #define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) +/* Hard Reset delay timings */ +#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000) +#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000) +#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000) + /***************************************************************************** * * Message Descriptors @@ -472,7 +492,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; U64 Words; } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, - Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; +Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; @@ -512,6 +532,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Power Management Control */ #define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +/* Send Host Message */ +#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) /* beginning of product-specific range */ #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* end of product-specific range */ @@ -1059,10 +1081,16 @@ typedef struct _MPI2_IEEE_SGE_UNION #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) #define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) + /* IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) + /* IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) - + /* IEEE Simple Element only */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) + /* IEEE Chain Element only */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \ + (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */ /**************************************************************************** * IEEE SGE operation Macros diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index d76a6584760..88cb7f828bb 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.15 + * mpi2_cnfg.h Version: 02.00.23 * * Version History * --------------- @@ -125,6 +125,32 @@ * define. * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. + * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) + * defines. + * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to + * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for + * the Pinout field. + * Added BoardTemperature and BoardTemperatureUnits fields + * to MPI2_CONFIG_PAGE_IO_UNIT_7. + * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define + * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. + * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. + * Added IO Unit Page 8, IO Unit Page 9, + * and IO Unit Page 10. + * Added SASNotifyPrimitiveMasks field to + * MPI2_CONFIG_PAGE_IOC_7. + * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). + * 05-25-11 02.00.20 Cleaned up a few comments. + * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities + * for PCIe link as obsolete. + * Added SpinupFlags field containing a Disable Spin-up + * bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of + * SAS IO Unit Page 4. + * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. + * Added UEFIVersion field to BIOS Page 1 and defined new + * BiosOptions bits. + * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. + * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. * -------------------------------------------------------------------------- */ @@ -208,6 +234,7 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) +#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) /***************************************************************************** @@ -319,7 +346,9 @@ typedef struct _MPI2_CONFIG_REQUEST U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved1; /* 0x0A */ - U32 Reserved2; /* 0x0C */ + U8 Reserved2; /* 0x0C */ + U8 ProxyVF_ID; /* 0x0D */ + U16 Reserved4; /* 0x0E */ U32 Reserved3; /* 0x10 */ MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ U32 PageAddress; /* 0x18 */ @@ -610,23 +639,31 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO U32 Pinout; /* 0x00 */ U8 Connector[16]; /* 0x04 */ U8 Location; /* 0x14 */ - U8 Reserved1; /* 0x15 */ + U8 ReceptacleID; /* 0x15 */ U16 Slot; /* 0x16 */ U32 Reserved2; /* 0x18 */ } MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; /* defines for the Pinout field */ -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) -#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) -#define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) +#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) +#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) + +#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) +#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) +#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) +#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) +#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) +#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) +#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) +#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) +#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) /* defines for the Location field */ #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) @@ -660,9 +697,10 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; -#define MPI2_MANUFACTURING7_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) /* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) @@ -745,8 +783,6 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) -#define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) -#define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) /* IO Unit Page 3 */ @@ -849,11 +885,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { U16 IOCTemperature; /* 0x10 */ U8 IOCTemperatureUnits; /* 0x12 */ U8 IOCSpeed; /* 0x13 */ - U32 Reserved3; /* 0x14 */ + U16 BoardTemperature; /* 0x14 */ + U8 BoardTemperatureUnits; /* 0x16 */ + U8 Reserved3; /* 0x17 */ } MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; -#define MPI2_IOUNITPAGE7_PAGEVERSION (0x01) +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02) /* defines for IO Unit Page 7 PCIeWidth field */ #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) @@ -878,9 +916,8 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) #define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) #define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) -#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) -#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) - +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */ +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */ /* defines for IO Unit Page 7 IOCTemperatureUnits field */ #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) @@ -893,6 +930,125 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) #define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) +/* defines for IO Unit Page 7 BoardTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) + +/* IO Unit Page 8 */ + +#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) + +typedef struct _MPI2_IOUNIT8_SENSOR { + U16 Flags; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U16 + Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ +} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR, +Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t; + +/* defines for IO Unit Page 8 Sensor Flags field */ +#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 PollingInterval; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT8_SENSOR + Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, +Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t; + +#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) + + +/* IO Unit Page 9 */ + +typedef struct _MPI2_IOUNIT9_SENSOR { + U16 CurrentTemperature; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 Flags; /* 0x04 */ + U8 Reserved2; /* 0x05 */ + U16 Reserved3; /* 0x06 */ + U32 Reserved4; /* 0x08 */ + U32 Reserved5; /* 0x0C */ +} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR, +Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t; + +/* defines for IO Unit Page 9 Sensor Flags field */ +#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 Reserved4; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT9_SENSOR + Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, +Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t; + +#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) + + +/* IO Unit Page 10 */ + +typedef struct _MPI2_IOUNIT10_FUNCTION { + U8 CreditPercent; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION, +Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumFunctions at runtime. + */ +#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES +#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumFunctions; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_IOUNIT10_FUNCTION + Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, +Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t; + +#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) + /**************************************************************************** @@ -980,9 +1136,10 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_6 } MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; -#define MPI2_IOCPAGE6_PAGEVERSION (0x04) +#define MPI2_IOCPAGE6_PAGEVERSION (0x05) /* defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) @@ -1000,12 +1157,12 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_7 U32 Reserved1; /* 0x04 */ U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ U16 SASBroadcastPrimitiveMasks; /* 0x18 */ - U16 Reserved2; /* 0x1A */ + U16 SASNotifyPrimitiveMasks; /* 0x1A */ U32 Reserved3; /* 0x1C */ } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; -#define MPI2_IOCPAGE7_PAGEVERSION (0x01) +#define MPI2_IOCPAGE7_PAGEVERSION (0x02) /* IOC Page 8 */ @@ -1053,24 +1210,32 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_8 typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { - MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ - U32 BiosOptions; /* 0x04 */ - U32 IOCSettings; /* 0x08 */ - U32 Reserved1; /* 0x0C */ - U32 DeviceSettings; /* 0x10 */ - U16 NumberOfDevices; /* 0x14 */ - U16 Reserved2; /* 0x16 */ - U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ - U16 IOTimeoutSequential; /* 0x1A */ - U16 IOTimeoutOther; /* 0x1C */ - U16 IOTimeoutBlockDevicesRM; /* 0x1E */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BiosOptions; /* 0x04 */ + U32 IOCSettings; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DeviceSettings; /* 0x10 */ + U16 NumberOfDevices; /* 0x14 */ + U16 UEFIVersion; /* 0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ + U16 IOTimeoutSequential; /* 0x1A */ + U16 IOTimeoutOther; /* 0x1C */ + U16 IOTimeoutBlockDevicesRM; /* 0x1E */ } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; -#define MPI2_BIOSPAGE1_PAGEVERSION (0x04) +#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) /* values for BIOS Page 1 BiosOptions field */ -#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) +#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) +#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) +#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) +#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) + +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) /* values for BIOS Page 1 IOCSettings field */ #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) @@ -1097,6 +1262,13 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) +/* defines for BIOS Page 1 UEFIVersion field */ +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) + + /* BIOS Page 2 */ @@ -1826,10 +1998,14 @@ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { U8 MaxTargetSpinup; /* 0x00 */ U8 SpinupDelay; /* 0x01 */ - U16 Reserved1; /* 0x02 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved1; /* 0x03 */ } MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; +/* defines for SAS IO Unit Page 4 SpinupFlags */ +#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) + /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check the value returned for NumPhys at runtime. @@ -2048,18 +2224,39 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) /* defines for PowerManagementCapabilities field */ -#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000) -#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800) -#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400) -#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200) -#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100) -#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001) - - +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) + + + +/* SAS IO Unit Page 16 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U64 TimeStamp; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ + U32 FastPathPendedRequests; /* 0x18 */ + U32 FastPathUnPendedRequests; /* 0x1C */ + U32 FastPathHostRequestStarts; /* 0x20 */ + U32 FastPathFirmwareRequestStarts; /* 0x24 */ + U32 FastPathHostCompletions; /* 0x28 */ + U32 FastPathFirmwareCompletions; /* 0x2C */ + U32 NonFastPathRequestStarts; /* 0x30 */ + U32 NonFastPathHostCompletions; /* 0x30 */ +} MPI2_CONFIG_PAGE_SASIOUNIT16, +MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, +Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t; + +#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) /**************************************************************************** @@ -2177,13 +2374,12 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ -/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ - /* values for SAS Expander Page 1 DiscoveryInfo field */ #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ /**************************************************************************** * SAS Device Config Pages @@ -2244,6 +2440,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ /* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) @@ -2302,6 +2499,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 #define MPI2_SASPHY0_PAGEVERSION (0x03) +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + /* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ /* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ @@ -2309,12 +2508,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 /* values for SAS PHY Page 0 Flags field */ #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) -/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ -/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ - /* SAS PHY Page 1 */ @@ -2799,5 +2996,25 @@ typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { #define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) +/**************************************************************************** +* Extended Manufacturing Config Pages +****************************************************************************/ + +/* + * Generic structure to use for product-specific extended manufacturing pages + * (currently Extended Manufacturing Page 40 through Extended Manufacturing + * Page 60). + */ + +typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo; /* 0x08 */ +} MPI2_CONFIG_PAGE_EXT_MAN_PS, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, + Mpi2ExtManufacturingPagePS_t, + MPI2_POINTER pMpi2ExtManufacturingPagePS_t; + +/* PageVersion should be provided by product-specific code */ + #endif diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt deleted file mode 100644 index b1e88f26b74..00000000000 --- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt +++ /dev/null @@ -1,384 +0,0 @@ - ============================== - Fusion-MPT MPI 2.0 Header File Change History - ============================== - - Copyright (c) 2000-2010 LSI Corporation. - - --------------------------------------- - Header Set Release Version: 02.00.14 - Header Set Release Date: 10-28-09 - --------------------------------------- - - Filename Current version Prior version - ---------- --------------- ------------- - mpi2.h 02.00.14 02.00.13 - mpi2_cnfg.h 02.00.13 02.00.12 - mpi2_init.h 02.00.08 02.00.07 - mpi2_ioc.h 02.00.13 02.00.12 - mpi2_raid.h 02.00.04 02.00.04 - mpi2_sas.h 02.00.03 02.00.02 - mpi2_targ.h 02.00.03 02.00.03 - mpi2_tool.h 02.00.04 02.00.04 - mpi2_type.h 02.00.00 02.00.00 - mpi2_ra.h 02.00.00 02.00.00 - mpi2_hbd.h 02.00.00 - mpi2_history.txt 02.00.14 02.00.13 - - - * Date Version Description - * -------- -------- ------------------------------------------------------ - -mpi2.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. - * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. - * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. - * Moved ReplyPostHostIndex register to offset 0x6C of the - * MPI2_SYSTEM_INTERFACE_REGS and modified the define for - * MPI2_REPLY_POST_HOST_INDEX_OFFSET. - * Added union of request descriptors. - * Added union of reply descriptors. - * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. - * Added define for MPI2_VERSION_02_00. - * Fixed the size of the FunctionDependent5 field in the - * MPI2_DEFAULT_REPLY structure. - * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. - * Removed the MPI-defined Fault Codes and extended the - * product specific codes up to 0xEFFF. - * Added a sixth key value for the WriteSequence register - * and changed the flush value to 0x0. - * Added message function codes for Diagnostic Buffer Post - * and Diagnsotic Release. - * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED - * Moved MPI2_VERSION_UNION from mpi2_ioc.h. - * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. - * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. - * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. - * Added #defines for marking a reply descriptor as unused. - * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. - * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. - * Moved LUN field defines from mpi2_init.h. - * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. - * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. - * In all request and reply descriptors, replaced VF_ID - * field with MSIxIndex field. - * Removed DevHandle field from - * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those - * bytes reserved. - * Added RAID Accelerator functionality. - * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. - * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. - * Added MSI-x index mask and shift for Reply Post Host - * Index register. - * Added function code for Host Based Discovery Action. - * -------------------------------------------------------------------------- - -mpi2_cnfg.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. - * Added Manufacturing Page 11. - * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE - * define. - * 06-26-07 02.00.02 Adding generic structure for product-specific - * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. - * Rework of BIOS Page 2 configuration page. - * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the - * forms. - * Added configuration pages IOC Page 8 and Driver - * Persistent Mapping Page 0. - * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated - * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, - * RAID Physical Disk Pages 0 and 1, RAID Configuration - * Page 0). - * Added new value for AccessStatus field of SAS Device - * Page 0 (_SATA_NEEDS_INITIALIZATION). - * 10-31-07 02.00.04 Added missing SEPDevHandle field to - * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. - * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for - * NVDATA. - * Modified IOC Page 7 to use masks and added field for - * SASBroadcastPrimitiveMasks. - * Added MPI2_CONFIG_PAGE_BIOS_4. - * Added MPI2_CONFIG_PAGE_LOG_0. - * 02-29-08 02.00.06 Modified various names to make them 32-character unique. - * Added SAS Device IDs. - * Updated Integrated RAID configuration pages including - * Manufacturing Page 4, IOC Page 6, and RAID Configuration - * Page 0. - * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. - * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. - * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. - * Added missing MaxNumRoutedSasAddresses field to - * MPI2_CONFIG_PAGE_EXPANDER_0. - * Added SAS Port Page 0. - * Modified structure layout for - * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. - * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use - * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. - * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF - * to 0x000000FF. - * Added two new values for the Physical Disk Coercion Size - * bits in the Flags field of Manufacturing Page 4. - * Added product-specific Manufacturing pages 16 to 31. - * Modified Flags bits for controlling write cache on SATA - * drives in IO Unit Page 1. - * Added new bit to AdditionalControlFlags of SAS IO Unit - * Page 1 to control Invalid Topology Correction. - * Added SupportedPhysDisks field to RAID Volume Page 1 and - * added related defines. - * Added additional defines for RAID Volume Page 0 - * VolumeStatusFlags field. - * Modified meaning of RAID Volume Page 0 VolumeSettings - * define for auto-configure of hot-swap drives. - * Added PhysDiskAttributes field (and related defines) to - * RAID Physical Disk Page 0. - * Added MPI2_SAS_PHYINFO_PHY_VACANT define. - * Added three new DiscoveryStatus bits for SAS IO Unit - * Page 0 and SAS Expander Page 0. - * Removed multiplexing information from SAS IO Unit pages. - * Added BootDeviceWaitTime field to SAS IO Unit Page 4. - * Removed Zone Address Resolved bit from PhyInfo and from - * Expander Page 0 Flags field. - * Added two new AccessStatus values to SAS Device Page 0 - * for indicating routing problems. Added 3 reserved words - * to this page. - * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. - * Inserted missing reserved field into structure for IOC - * Page 6. - * Added more pending task bits to RAID Volume Page 0 - * VolumeStatusFlags defines. - * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. - * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 - * and SAS Expander Page 0 to flag a downstream initiator - * when in simplified routing mode. - * Removed SATA Init Failure defines for DiscoveryStatus - * fields of SAS IO Unit Page 0 and SAS Expander Page 0. - * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. - * Added PortGroups, DmaGroup, and ControlGroup fields to - * SAS Device Page 0. - * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO - * Unit Page 6. - * Added expander reduced functionality data to SAS - * Expander Page 0. - * Added SAS PHY Page 2 and SAS PHY Page 3. - * 07-30-09 02.00.12 Added IO Unit Page 7. - * Added new device ids. - * Added SAS IO Unit Page 5. - * Added partial and slumber power management capable flags - * to SAS Device Page 0 Flags field. - * Added PhyInfo defines for power condition. - * Added Ethernet configuration pages. - * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. - * Added SAS PHY Page 4 structure and defines. - * -------------------------------------------------------------------------- - -mpi2_init.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. - * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. - * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. - * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. - * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. - * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO - * Control field Task Attribute flags. - * Moved LUN field defines to mpi2.h becasue they are - * common to many structures. - * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to - * Query Asynchronous Event. - * Defined two new bits in the SlotStatus field of the SCSI - * Enclosure Processor Request and Reply. - * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for - * both SCSI IO Error Reply and SCSI Task Management Reply. - * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. - * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. - * -------------------------------------------------------------------------- - -mpi2_ioc.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to - * MaxTargets. - * Added TotalImageSize field to FWDownload Request. - * Added reserved words to FWUpload Request. - * 06-26-07 02.00.02 Added IR Configuration Change List Event. - * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit - * request and replaced it with - * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. - * Replaced the MinReplyQueueDepth field of the IOCFacts - * reply with MaxReplyDescriptorPostQueueDepth. - * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum - * depth for the Reply Descriptor Post Queue. - * Added SASAddress field to Initiator Device Table - * Overflow Event data. - * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING - * for SAS Initiator Device Status Change Event data. - * Modified Reason Code defines for SAS Topology Change - * List Event data, including adding a bit for PHY Vacant - * status, and adding a mask for the Reason Code. - * Added define for - * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. - * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. - * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of - * the IOCFacts Reply. - * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. - * Moved MPI2_VERSION_UNION to mpi2.h. - * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks - * instead of enables, and added SASBroadcastPrimitiveMasks - * field. - * Added Log Entry Added Event and related structure. - * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. - * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. - * Added MaxVolumes and MaxPersistentEntries fields to - * IOCFacts reply. - * Added ProtocalFlags and IOCCapabilities fields to - * MPI2_FW_IMAGE_HEADER. - * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. - * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to - * a U16 (from a U32). - * Removed extra 's' from EventMasks name. - * 06-27-08 02.00.08 Fixed an offset in a comment. - * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. - * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and - * renamed MinReplyFrameSize to ReplyFrameSize. - * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. - * Added two new RAIDOperation values for Integrated RAID - * Operations Status Event data. - * Added four new IR Configuration Change List Event data - * ReasonCode values. - * Added two new ReasonCode defines for SAS Device Status - * Change Event data. - * Added three new DiscoveryStatus bits for the SAS - * Discovery event data. - * Added Multiplexing Status Change bit to the PhyStatus - * field of the SAS Topology Change List event data. - * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. - * BootFlags are now product-specific. - * Added defines for the indivdual signature bytes - * for MPI2_INIT_IMAGE_FOOTER. - * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. - * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR - * define. - * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE - * define. - * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. - * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. - * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. - * Added two new reason codes for SAS Device Status Change - * Event. - * Added new event: SAS PHY Counter. - * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. - * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. - * Added new product id family for 2208. - * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. - * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. - * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. - * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. - * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. - * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. - * Added Host Based Discovery Phy Event data. - * Added defines for ProductID Product field - * (MPI2_FW_HEADER_PID_). - * Modified values for SAS ProductID Family - * (MPI2_FW_HEADER_PID_FAMILY_). - * -------------------------------------------------------------------------- - -mpi2_raid.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 08-31-07 02.00.01 Modifications to RAID Action request and reply, - * including the Actions and ActionData. - * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. - * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that - * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT - * can be sized by the build environment. - * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of - * VolumeCreationFlags and marked the old one as obsolete. - * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. - * -------------------------------------------------------------------------- - -mpi2_sas.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit - * Control Request. - * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control - * Request. - * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST - * to MPI2_SGE_IO_UNION since it supports chained SGLs. - * 05-12-10 02.00.04 Modified some comments. - * -------------------------------------------------------------------------- - -mpi2_targ.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to - * BufferPostFlags field of CommandBufferPostBase Request. - * 02-29-08 02.00.02 Modified various names to make them 32-character unique. - * 10-02-08 02.00.03 Removed NextCmdBufferOffset from - * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. - * Target Status Send Request only takes a single SGE for - * response data. - * -------------------------------------------------------------------------- - -mpi2_tool.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release - * structures and defines. - * 02-29-08 02.00.02 Modified various names to make them 32-character unique. - * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. - * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request - * and reply messages. - * Added MPI2_DIAG_BUF_TYPE_EXTENDED. - * Incremented MPI2_DIAG_BUF_TYPE_COUNT. - * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. - * -------------------------------------------------------------------------- - -mpi2_type.h - * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. - * -------------------------------------------------------------------------- - -mpi2_ra.h - * 05-06-09 02.00.00 Initial version. - * -------------------------------------------------------------------------- - -mpi2_hbd.h - * 10-28-09 02.00.00 Initial version. - * -------------------------------------------------------------------------- - - -mpi2_history.txt Parts list history - -Filename 02.00.14 02.00.13 02.00.12 ----------- -------- -------- -------- -mpi2.h 02.00.14 02.00.13 02.00.12 -mpi2_cnfg.h 02.00.13 02.00.12 02.00.11 -mpi2_init.h 02.00.08 02.00.07 02.00.07 -mpi2_ioc.h 02.00.13 02.00.12 02.00.11 -mpi2_raid.h 02.00.04 02.00.04 02.00.03 -mpi2_sas.h 02.00.03 02.00.02 02.00.02 -mpi2_targ.h 02.00.03 02.00.03 02.00.03 -mpi2_tool.h 02.00.04 02.00.04 02.00.03 -mpi2_type.h 02.00.00 02.00.00 02.00.00 -mpi2_ra.h 02.00.00 02.00.00 02.00.00 -mpi2_hbd.h 02.00.00 - -Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 ----------- -------- -------- -------- -------- -------- -------- -mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 -mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06 -mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03 -mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06 -mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02 -mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 -mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02 -mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 -mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 - -Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 ----------- -------- -------- -------- -------- -------- -------- -mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 -mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 -mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 -mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 -mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 -mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 -mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 -mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 -mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 - diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index 20e6b886934..9d284dae655 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_init.h * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.10 + * mpi2_init.h Version: 02.00.14 * * Version History * --------------- @@ -21,7 +21,7 @@ * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO * Control field Task Attribute flags. - * Moved LUN field defines to mpi2.h becasue they are + * Moved LUN field defines to mpi2.h because they are * common to many structures. * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to * Query Asynchronous Event. @@ -33,6 +33,10 @@ * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. + * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. + * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command + * Priority to match SAM-4. + * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. * -------------------------------------------------------------------------- */ @@ -139,6 +143,9 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) +/* number of SGLOffset fields */ +#define MPI2_SCSIIO_NUM_SGLOFFSETS (4) + /* SCSI IO IoFlags bits */ /* Large CDB Address Space */ @@ -183,6 +190,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24) #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) #define MPI2_SCSIIO_CONTROL_READ (0x02000000) @@ -190,6 +198,9 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) +/* alternate name for the previous field; called Command Priority in SAM-4 */ +#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11) #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 761cbdb8a03..d159c5f24aa 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.15 + * mpi2_ioc.h Version: 02.00.22 * * Version History * --------------- @@ -103,6 +103,24 @@ * defines. * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. + * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. + * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added + * SASNotifyPrimitiveMasks field to + * MPI2_EVENT_NOTIFICATION_REQUEST. + * Added Temperature Threshold Event. + * Added Host Message Event. + * Added Send Host Message request and reply. + * 05-25-11 02.00.18 For Extended Image Header, added + * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and + * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. + * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. + * 08-24-11 02.00.19 Added PhysicalPort field to + * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. + * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. + * 03-29-12 02.00.21 Added a product specific range to event values. + * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. + * Added ElapsedSeconds field to + * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * -------------------------------------------------------------------------- */ @@ -269,6 +287,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /* IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) @@ -420,7 +439,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST U32 Reserved6; /* 0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ U16 SASBroadcastPrimitiveMasks; /* 0x24 */ - U16 Reserved7; /* 0x26 */ + U16 SASNotifyPrimitiveMasks; /* 0x26 */ U32 Reserved8; /* 0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, @@ -475,7 +494,11 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) #define MPI2_EVENT_SAS_QUIESCE (0x0025) - +#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) +#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) +#define MPI2_EVENT_HOST_MESSAGE (0x0028) +#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) +#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) /* Log Entry Added Event data */ @@ -506,6 +529,39 @@ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; +/* Temperature Threshold Event data */ + +typedef struct _MPI2_EVENT_DATA_TEMPERATURE { + U16 Status; /* 0x00 */ + U8 SensorNum; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U16 CurrentTemperature; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ +} MPI2_EVENT_DATA_TEMPERATURE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, +Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; + +/* Temperature Threshold Event data Status bits */ +#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) +#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) +#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) +#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) + + +/* Host Message Event data */ + +typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { + U8 SourceVF_ID; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ + U32 HostData[1]; /* 0x08 */ +} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, +Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; + + /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED @@ -535,7 +591,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ - U8 Reserved1; /* 0x03 */ + U8 PhysicalPort; /* 0x03 */ U8 ASC; /* 0x04 */ U8 ASCQ; /* 0x05 */ U16 DevHandle; /* 0x06 */ @@ -572,7 +628,7 @@ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS U8 RAIDOperation; /* 0x04 */ U8 PercentComplete; /* 0x05 */ U16 Reserved2; /* 0x06 */ - U32 Resereved3; /* 0x08 */ + U32 ElapsedSeconds; /* 0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, @@ -748,6 +804,24 @@ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) +/* SAS Notify Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 Reserved1; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +Mpi2EventDataSasNotifyPrimitive_t, +MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) +#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) +#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) +#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) + /* SAS Initiator Device Status Change Event data */ @@ -1000,6 +1074,53 @@ typedef struct _MPI2_EVENT_ACK_REPLY /**************************************************************************** +* SendHostMessage message +****************************************************************************/ + +/* SendHostMessage Request message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { + U16 HostDataLength; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 Reserved4; /* 0x0C */ + U8 DestVF_ID; /* 0x0D */ + U16 Reserved5; /* 0x0E */ + U32 Reserved6; /* 0x10 */ + U32 Reserved7; /* 0x14 */ + U32 Reserved8; /* 0x18 */ + U32 Reserved9; /* 0x1C */ + U32 Reserved10; /* 0x20 */ + U32 HostData[1]; /* 0x24 */ +} MPI2_SEND_HOST_MESSAGE_REQUEST, +MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, +Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; + + +/* SendHostMessage Reply message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { + U16 HostDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, +Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; + + +/**************************************************************************** * FWDownload message ****************************************************************************/ @@ -1032,6 +1153,7 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) /* FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE @@ -1257,16 +1379,18 @@ typedef struct _MPI2_EXT_IMAGE_HEADER #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) /* defines for the ImageType field */ -#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) -#define MPI2_EXT_IMAGE_TYPE_FW (0x01) -#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) -#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) -#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) -#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) -#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) -#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) - -#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) +#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) +#define MPI2_EXT_IMAGE_TYPE_MAX \ + (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */ @@ -1459,7 +1583,7 @@ typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { /* defines for the Feature field */ #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) -#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) +#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */ #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) @@ -1488,14 +1612,14 @@ typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ /* Parameter1 indicates desired PCIe link speed using these defines */ -#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) -#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) -#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) +#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */ /* Parameter2 indicates desired PCIe link width using these defines */ -#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) -#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) -#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) -#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */ /* Parameter3 and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h index bd61a7b60a2..0d202a2c6db 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_raid.h * Title: MPI Integrated RAID messages and structures * Creation Date: April 26, 2007 * - * mpi2_raid.h Version: 02.00.05 + * mpi2_raid.h Version: 02.00.09 * * Version History * --------------- @@ -23,6 +23,12 @@ * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of * VolumeCreationFlags and marked the old one as obsolete. * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. + * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with + * related structures and defines. + * Added product-specific range to RAID Action values. + * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. + * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. + * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. * -------------------------------------------------------------------------- */ @@ -176,7 +182,10 @@ typedef struct _MPI2_RAID_ACTION_REQUEST #define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) #define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) #define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) - +#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23) +#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24) +#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF) /* RAID Volume Creation Structure */ @@ -244,6 +253,23 @@ typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION Mpi2RaidOnlineCapacityExpansion_t, MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t; +/* RAID Compatibility Input Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT { + U16 SourceDevHandle; /* 0x00 */ + U16 CandidateDevHandle; /* 0x02 */ + U32 Flags; /* 0x04 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, +MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, +Mpi2RaidCompatibilityInputStruct_t, +MPI2_POINTER pMpi2RaidCompatibilityInputStruct_t; + +/* defines for RAID Compatibility Structure Flags field */ +#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002) +#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001) + /* RAID Volume Indicator Structure */ @@ -252,10 +278,13 @@ typedef struct _MPI2_RAID_VOL_INDICATOR U64 TotalBlocks; /* 0x00 */ U64 BlocksRemaining; /* 0x08 */ U32 Flags; /* 0x10 */ + U32 ElapsedSeconds; /* 0x14 */ } MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR, Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t; /* defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000) + #define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) #define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) #define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) @@ -263,15 +292,45 @@ typedef struct _MPI2_RAID_VOL_INDICATOR #define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) #define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004) +/* RAID Compatibility Result Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT { + U8 State; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 GenericAttributes; /* 0x04 */ + U32 OEMSpecificAttributes; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + U32 Reserved4; /* 0x10 */ +} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, +MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, +Mpi2RaidCompatibilityResultStruct_t, +MPI2_POINTER pMpi2RaidCompatibilityResultStruct_t; + +/* defines for RAID Compatibility Result Structure State field */ +#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00) +#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01) + +/* defines for RAID Compatibility Result Structure GenericAttributes field */ +#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010) + +#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C) +#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008) +#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004) + +#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003) +#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002) +#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001) /* RAID Action Reply ActionData union */ typedef union _MPI2_RAID_ACTION_REPLY_DATA { - U32 Word[5]; - MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; - U16 VolDevHandle; - U8 VolumeState; - U8 PhysDiskNum; + U32 Word[6]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; + MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult; } MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA, Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t; diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h index 608f6d6e6fc..50b39ccd526 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: February 9, 2007 * - * mpi2_sas.h Version: 02.00.04 + * mpi2_sas.h Version: 02.00.05 * * Version History * --------------- @@ -21,6 +21,7 @@ * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST * to MPI2_SGE_IO_UNION since it supports chained SGLs. * 05-12-10 02.00.04 Modified some comments. + * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. * -------------------------------------------------------------------------- */ @@ -163,7 +164,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST U32 Reserved4; /* 0x14 */ U32 DataLength; /* 0x18 */ U8 CommandFIS[20]; /* 0x1C */ - MPI2_SGE_IO_UNION SGL; /* 0x20 */ + MPI2_SGE_IO_UNION SGL; /* 0x30 */ } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; @@ -246,6 +247,8 @@ typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) +#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 5c6e3a67bb9..11b2ac4e7c6 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_tool.h * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.05 + * mpi2_tool.h Version: 02.00.10 * * Version History * --------------- @@ -23,6 +23,12 @@ * Added MPI2_DIAG_BUF_TYPE_EXTENDED. * Incremented MPI2_DIAG_BUF_TYPE_COUNT. * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. + * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer + * Post Request. + * 05-25-11 02.00.07 Added Flags field and related defines to + * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. + * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that + * it uses MPI Chain SGE as well as MPI Simple SGE. * -------------------------------------------------------------------------- */ @@ -179,7 +185,7 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { U8 DevIndex; /* 0x14 */ U8 Action; /* 0x15 */ U8 SGLFlags; /* 0x16 */ - U8 Reserved7; /* 0x17 */ + U8 Flags; /* 0x17 */ U16 TxDataLength; /* 0x18 */ U16 RxDataLength; /* 0x1A */ U32 Reserved8; /* 0x1C */ @@ -203,6 +209,9 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { /* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ +/* values for the Flags field */ +#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80) +#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07) /* Toolbox ISTWI Read Write Tool reply message */ typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { @@ -263,7 +272,7 @@ typedef struct _MPI2_TOOLBOX_BEACON_REQUEST #define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C) -/* Toolbox Diagnostic CLI Tool request message */ +/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { U8 Tool; /* 0x00 */ U8 Reserved1; /* 0x01 */ @@ -281,7 +290,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { U32 DataLength; /* 0x10 */ U8 DiagnosticCliCommand [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */ - MPI2_SGE_SIMPLE_UNION SGL; /* 0x70 */ + MPI2_MPI_SGE_IO_UNION SGL; /* 0x70 */ } MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, Mpi2ToolboxDiagnosticCliRequest_t, @@ -354,6 +363,10 @@ typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST /* count of the number of buffer types */ #define MPI2_DIAG_BUF_TYPE_COUNT (0x03) +/* values for the Flags field */ +#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002) +#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001) + /**************************************************************************** * Diagnostic Buffer Post reply diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h index cfde017bf16..0b128b68a5e 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_type.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_type.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2007 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_type.h |