diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 168 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 977 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 75 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 429 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 91 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 16 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 204 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_type.h | 2 |
8 files changed, 1793 insertions, 169 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 7bb2ece8b2e..7b14a015c90 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.11 + * mpi2.h Version: 02.00.28 * * Version History * --------------- @@ -45,6 +45,39 @@ * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. * Moved LUN field defines from mpi2_init.h. * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. + * In all request and reply descriptors, replaced VF_ID + * field with MSIxIndex field. + * Removed DevHandle field from + * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those + * bytes reserved. + * Added RAID Accelerator functionality. + * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MSI-x index mask and shift for Reply Post Host + * Index register. + * Added function code for Host Based Discovery Action. + * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. + * Added defines for product-specific range of message + * function codes, 0xF0 to 0xFF. + * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. + * Added alternative defines for the SGE Direction bit. + * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. + * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. + * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. + * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. + * Added Hard Reset delay timings. + * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -70,7 +103,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x0B) +#define MPI2_HEADER_VERSION_UNIT (0x1C) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -224,9 +257,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS #define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) /* - * Offset for the Reply Descriptor Post Queue + * Defines for the Reply Descriptor Post Queue */ #define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) +#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF) +#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000) +#define MPI2_RPHI_MSIX_INDEX_SHIFT (24) /* * Defines for the HCBSize and address @@ -245,6 +281,11 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS #define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) +/* Hard Reset delay timings */ +#define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC (50000) +#define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC (255000) +#define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC (256000) + /***************************************************************************** * * Message Descriptors @@ -257,7 +298,7 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 DescriptorTypeDependent; /* 0x06 */ @@ -271,6 +312,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) +#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) @@ -279,7 +321,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 Reserved1; /* 0x06 */ @@ -293,7 +335,7 @@ typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 DevHandle; /* 0x06 */ @@ -306,7 +348,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR { U8 RequestFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 LMID; /* 0x04 */ U16 IoIndex; /* 0x06 */ @@ -315,14 +357,29 @@ typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR Mpi2SCSITargetRequestDescriptor_t, MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t; + +/* RAID Accelerator Request Descriptor */ +typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR { + U8 RequestFlags; /* 0x00 */ + U8 MSIxIndex; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 Reserved; /* 0x06 */ +} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR, + Mpi2RAIDAcceleratorRequestDescriptor_t, + MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t; + + /* union of Request Descriptors */ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { - MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; - MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; - MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; - MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; - U64 Words; + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; + U64 Words; } MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION, Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; @@ -333,19 +390,20 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 DescriptorTypeDependent1; /* 0x02 */ U32 DescriptorTypeDependent2; /* 0x04 */ } MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t; /* defines for the ReplyFlags field */ -#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) -#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) -#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) -#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) -#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) -#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) /* values for marking a reply descriptor as unused */ #define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) @@ -355,7 +413,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U32 ReplyFrameAddress; /* 0x04 */ } MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, @@ -368,10 +426,10 @@ typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U16 TaskTag; /* 0x04 */ - U16 DevHandle; /* 0x06 */ + U16 Reserved1; /* 0x06 */ } MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, Mpi2SCSIIOSuccessReplyDescriptor_t, @@ -382,7 +440,7 @@ typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U16 SMID; /* 0x02 */ U8 SequenceNumber; /* 0x04 */ U8 Reserved1; /* 0x05 */ @@ -397,7 +455,7 @@ typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR { U8 ReplyFlags; /* 0x00 */ - U8 VF_ID; /* 0x01 */ + U8 MSIxIndex; /* 0x01 */ U8 VP_ID; /* 0x02 */ U8 Flags; /* 0x03 */ U16 InitiatorDevHandle; /* 0x04 */ @@ -411,25 +469,36 @@ typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR #define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) +/* RAID Accelerator Success Reply Descriptor */ +typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR { + U8 ReplyFlags; /* 0x00 */ + U8 MSIxIndex; /* 0x01 */ + U16 SMID; /* 0x02 */ + U32 Reserved; /* 0x04 */ +} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR, + Mpi2RAIDAcceleratorSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t; + + /* union of Reply Descriptors */ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { - MPI2_DEFAULT_REPLY_DESCRIPTOR Default; - MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; - MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; - MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; - MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; - U64 Words; + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; + U64 Words; } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, - Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; +Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; /***************************************************************************** * * Message Functions -* 0x80 -> 0x8F reserved for private message use per product -* * *****************************************************************************/ @@ -458,12 +527,23 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ #define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ #define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ +#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/ +/* Host Based Discovery Action */ +#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) +/* Power Management Control */ +#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +/* Send Host Message */ +#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) +/* beginning of product-specific range */ +#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) +/* end of product-specific range */ +#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) + /* Doorbell functions */ #define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) -/* #define MPI2_FUNCTION_IO_UNIT_RESET (0x41) */ #define MPI2_FUNCTION_HANDSHAKE (0x42) @@ -555,12 +635,17 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) +/**************************************************************************** +* RAID Accelerator values +****************************************************************************/ + +#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0) /**************************************************************************** * IOCStatus flag to indicate that log info is available ****************************************************************************/ -#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) /**************************************************************************** * IOCLogInfo Types @@ -868,6 +953,9 @@ typedef struct _MPI2_MPI_SGE_UNION #define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) #define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) +#define MPI2_SGE_FLAGS_DEST (MPI2_SGE_FLAGS_IOC_TO_HOST) +#define MPI2_SGE_FLAGS_SOURCE (MPI2_SGE_FLAGS_HOST_TO_IOC) + /* Address Size */ #define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) @@ -993,10 +1081,16 @@ typedef struct _MPI2_IEEE_SGE_UNION #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) #define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) + /* IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) + /* IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) - + /* IEEE Simple Element only */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) + /* IEEE Chain Element only */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR \ + (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */ /**************************************************************************** * IEEE SGE operation Macros diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index 2f27cf6d6c6..88cb7f828bb 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.10 + * mpi2_cnfg.h Version: 02.00.23 * * Version History * --------------- @@ -95,6 +95,62 @@ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. * Added PortGroups, DmaGroup, and ControlGroup fields to * SAS Device Page 0. + * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO + * Unit Page 6. + * Added expander reduced functionality data to SAS + * Expander Page 0. + * Added SAS PHY Page 2 and SAS PHY Page 3. + * 07-30-09 02.00.12 Added IO Unit Page 7. + * Added new device ids. + * Added SAS IO Unit Page 5. + * Added partial and slumber power management capable flags + * to SAS Device Page 0 Flags field. + * Added PhyInfo defines for power condition. + * Added Ethernet configuration pages. + * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. + * Added SAS PHY Page 4 structure and defines. + * 02-10-10 02.00.14 Modified the comments for the configuration page + * structures that contain an array of data. The host + * should use the "count" field in the page data (e.g. the + * NumPhys field) to determine the number of valid elements + * in the array. + * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. + * Added PowerManagementCapabilities to IO Unit Page 7. + * Added PortWidthModGroup field to + * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. + * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT + * define. + * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. + * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. + * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) + * defines. + * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to + * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for + * the Pinout field. + * Added BoardTemperature and BoardTemperatureUnits fields + * to MPI2_CONFIG_PAGE_IO_UNIT_7. + * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define + * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. + * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. + * Added IO Unit Page 8, IO Unit Page 9, + * and IO Unit Page 10. + * Added SASNotifyPrimitiveMasks field to + * MPI2_CONFIG_PAGE_IOC_7. + * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). + * 05-25-11 02.00.20 Cleaned up a few comments. + * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities + * for PCIe link as obsolete. + * Added SpinupFlags field containing a Disable Spin-up + * bit to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of + * SAS IO Unit Page 4. + * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. + * Added UEFIVersion field to BIOS Page 1 and defined new + * BiosOptions bits. + * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. + * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. * -------------------------------------------------------------------------- */ @@ -177,6 +233,8 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) +#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) +#define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) /***************************************************************************** @@ -263,6 +321,14 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) +/* Ethernet PageAddress format */ +#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000) +#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000) + +#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) + + + /**************************************************************************** * Configuration messages ****************************************************************************/ @@ -280,7 +346,9 @@ typedef struct _MPI2_CONFIG_REQUEST U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved1; /* 0x0A */ - U32 Reserved2; /* 0x0C */ + U8 Reserved2; /* 0x0C */ + U8 ProxyVF_ID; /* 0x0D */ + U16 Reserved4; /* 0x0E */ U32 Reserved3; /* 0x10 */ MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ U32 PageAddress; /* 0x18 */ @@ -298,7 +366,7 @@ typedef struct _MPI2_CONFIG_REQUEST #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* Config Reply Message */ @@ -344,6 +412,20 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) +#define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E) + +#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080) +#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081) +#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082) +#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) +#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) +#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) +#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) + + + /* Manufacturing Page 0 */ @@ -508,7 +590,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) @@ -557,23 +639,31 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO U32 Pinout; /* 0x00 */ U8 Connector[16]; /* 0x04 */ U8 Location; /* 0x14 */ - U8 Reserved1; /* 0x15 */ + U8 ReceptacleID; /* 0x15 */ U16 Slot; /* 0x16 */ U32 Reserved2; /* 0x18 */ } MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; /* defines for the Pinout field */ -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) -#define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) -#define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) -#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) -#define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) +#define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00) +#define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8) + +#define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF) +#define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00) +#define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02) +#define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03) +#define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04) +#define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07) +#define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08) +#define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) +#define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) +#define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) /* defines for the Location field */ #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) @@ -586,7 +676,7 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) @@ -607,9 +697,10 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; -#define MPI2_MANUFACTURING7_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING7_PAGEVERSION (0x01) /* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002) #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) @@ -682,7 +773,9 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) /* IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800) #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9) #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) @@ -690,15 +783,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) -#define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) -#define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) /* IO Unit Page 3 */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) @@ -723,6 +814,243 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) +/* IO Unit Page 5 */ + +/* + * Upper layer code (drivers, utilities, etc.) should leave this define set to + * one and check the value returned for NumDmaEngines at runtime. + */ +#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES +#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */ + U64 RaidAcceleratorBufferSize; /* 0x0C */ + U64 RaidAcceleratorControlBaseAddress; /* 0x14 */ + U8 RAControlSize; /* 0x1C */ + U8 NumDmaEngines; /* 0x1D */ + U8 RAMinControlSize; /* 0x1E */ + U8 RAMaxControlSize; /* 0x1F */ + U32 Reserved1; /* 0x20 */ + U32 Reserved2; /* 0x24 */ + U32 Reserved3; /* 0x28 */ + U32 DmaEngineCapabilities + [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */ +} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, + Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t; + +#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00) + +/* defines for IO Unit Page 5 DmaEngineCapabilities field */ +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16) + +#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008) +#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004) +#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002) +#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001) + + +/* IO Unit Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Flags; /* 0x04 */ + U8 RAHostControlSize; /* 0x06 */ + U8 Reserved0; /* 0x07 */ + U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ + U32 Reserved3; /* 0x18 */ +} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6, + Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t; + +#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00) + +/* defines for IO Unit Page 6 Flags field */ +#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001) + + +/* IO Unit Page 7 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Reserved1; /* 0x04 */ + U8 PCIeWidth; /* 0x06 */ + U8 PCIeSpeed; /* 0x07 */ + U32 ProcessorState; /* 0x08 */ + U32 PowerManagementCapabilities; /* 0x0C */ + U16 IOCTemperature; /* 0x10 */ + U8 IOCTemperatureUnits; /* 0x12 */ + U8 IOCSpeed; /* 0x13 */ + U16 BoardTemperature; /* 0x14 */ + U8 BoardTemperatureUnits; /* 0x16 */ + U8 Reserved3; /* 0x17 */ +} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, + Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; + +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x02) + +/* defines for IO Unit Page 7 PCIeWidth field */ +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) + +/* defines for IO Unit Page 7 PCIeSpeed field */ +#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) + +/* defines for IO Unit Page 7 ProcessorState field */ +#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) +#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0) + +#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) +#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) + +/* defines for IO Unit Page 7 PowerManagementCapabilities field */ +#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /* obsolete */ +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /* obsolete */ + +/* defines for IO Unit Page 7 IOCTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02) + +/* defines for IO Unit Page 7 IOCSpeed field */ +#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01) +#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02) +#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04) +#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08) + +/* defines for IO Unit Page 7 BoardTemperatureUnits field */ +#define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) +#define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) + +/* IO Unit Page 8 */ + +#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) + +typedef struct _MPI2_IOUNIT8_SENSOR { + U16 Flags; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U16 + Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ +} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR, +Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t; + +/* defines for IO Unit Page 8 Sensor Flags field */ +#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 PollingInterval; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT8_SENSOR + Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, +Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t; + +#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) + + +/* IO Unit Page 9 */ + +typedef struct _MPI2_IOUNIT9_SENSOR { + U16 CurrentTemperature; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 Flags; /* 0x04 */ + U8 Reserved2; /* 0x05 */ + U16 Reserved3; /* 0x06 */ + U32 Reserved4; /* 0x08 */ + U32 Reserved5; /* 0x0C */ +} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR, +Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t; + +/* defines for IO Unit Page 9 Sensor Flags field */ +#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 Reserved4; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT9_SENSOR + Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, +Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t; + +#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) + + +/* IO Unit Page 10 */ + +typedef struct _MPI2_IOUNIT10_FUNCTION { + U8 CreditPercent; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION, +Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumFunctions at runtime. + */ +#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES +#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumFunctions; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_IOUNIT10_FUNCTION + Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, +Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t; + +#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) + + + /**************************************************************************** * IOC Config Pages ****************************************************************************/ @@ -808,9 +1136,10 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_6 } MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; -#define MPI2_IOCPAGE6_PAGEVERSION (0x04) +#define MPI2_IOCPAGE6_PAGEVERSION (0x05) /* defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) @@ -828,12 +1157,12 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_7 U32 Reserved1; /* 0x04 */ U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ U16 SASBroadcastPrimitiveMasks; /* 0x18 */ - U16 Reserved2; /* 0x1A */ + U16 SASNotifyPrimitiveMasks; /* 0x1A */ U32 Reserved3; /* 0x1C */ } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; -#define MPI2_IOCPAGE7_PAGEVERSION (0x01) +#define MPI2_IOCPAGE7_PAGEVERSION (0x02) /* IOC Page 8 */ @@ -881,24 +1210,32 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_8 typedef struct _MPI2_CONFIG_PAGE_BIOS_1 { - MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ - U32 BiosOptions; /* 0x04 */ - U32 IOCSettings; /* 0x08 */ - U32 Reserved1; /* 0x0C */ - U32 DeviceSettings; /* 0x10 */ - U16 NumberOfDevices; /* 0x14 */ - U16 Reserved2; /* 0x16 */ - U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ - U16 IOTimeoutSequential; /* 0x1A */ - U16 IOTimeoutOther; /* 0x1C */ - U16 IOTimeoutBlockDevicesRM; /* 0x1E */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BiosOptions; /* 0x04 */ + U32 IOCSettings; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DeviceSettings; /* 0x10 */ + U16 NumberOfDevices; /* 0x14 */ + U16 UEFIVersion; /* 0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ + U16 IOTimeoutSequential; /* 0x1A */ + U16 IOTimeoutOther; /* 0x1C */ + U16 IOTimeoutBlockDevicesRM; /* 0x1E */ } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; -#define MPI2_BIOSPAGE1_PAGEVERSION (0x04) +#define MPI2_BIOSPAGE1_PAGEVERSION (0x05) /* values for BIOS Page 1 BiosOptions field */ -#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) +#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0) +#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000) + +#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006) +#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000) +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002) +#define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004) + +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) /* values for BIOS Page 1 IOCSettings field */ #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) @@ -925,6 +1262,13 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) +/* defines for BIOS Page 1 UEFIVersion field */ +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00) +#define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF) +#define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0) + + /* BIOS Page 2 */ @@ -1053,7 +1397,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) @@ -1127,7 +1471,7 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for NumPhysDisks at runtime. */ #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) @@ -1184,6 +1528,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080) #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) @@ -1306,11 +1651,15 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06) #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) /* PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C) #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) + +#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03) #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) @@ -1329,7 +1678,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhysDiskPaths at runtime. + * one and check the value returned for NumPhysDiskPaths at runtime. */ #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) @@ -1382,6 +1731,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) @@ -1406,6 +1756,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 /* values for PhyInfo fields */ #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) + +#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27) +#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000) +#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000) + #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) @@ -1485,7 +1842,7 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT0_PHY_MAX #define MPI2_SAS_IOUNIT0_PHY_MAX (1) @@ -1556,7 +1913,7 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT1_PHY_MAX #define MPI2_SAS_IOUNIT1_PHY_MAX (1) @@ -1618,11 +1975,11 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 /* values for SAS IO Unit Page 1 PortFlags */ #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) -/* values for SAS IO Unit Page 2 PhyFlags */ +/* values for SAS IO Unit Page 1 PhyFlags */ #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) -/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +/* values for SAS IO Unit Page 1 MaxMinLinkRate */ #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) @@ -1641,13 +1998,17 @@ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP { U8 MaxTargetSpinup; /* 0x00 */ U8 SpinupDelay; /* 0x01 */ - U16 Reserved1; /* 0x02 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved1; /* 0x03 */ } MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; +/* defines for SAS IO Unit Page 4 SpinupFlags */ +#define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01) + /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * four and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT4_PHY_MAX #define MPI2_SAS_IOUNIT4_PHY_MAX (4) @@ -1681,6 +2042,223 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) +/* SAS IO Unit Page 5 */ + +typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { + U8 ControlFlags; /* 0x00 */ + U8 PortWidthModGroup; /* 0x01 */ + U16 InactivityTimerExponent; /* 0x02 */ + U8 SATAPartialTimeout; /* 0x04 */ + U8 Reserved2; /* 0x05 */ + U8 SATASlumberTimeout; /* 0x06 */ + U8 Reserved3; /* 0x07 */ + U8 SASPartialTimeout; /* 0x08 */ + U8 Reserved4; /* 0x09 */ + U8 SASSlumberTimeout; /* 0x0A */ + U8 Reserved5; /* 0x0B */ +} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS, + Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t; + +/* defines for ControlFlags field */ +#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08) +#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04) +#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) +#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) + +/* defines for PortWidthModeGroup field */ +#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) + +/* defines for InactivityTimerExponent field */ +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) +#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4) +#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007) +#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0) + +#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7) +#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5) +#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4) +#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3) +#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2) +#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1) +#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT5_PHY_MAX +#define MPI2_SAS_IOUNIT5_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x08 */ + U8 Reserved1; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ + MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings + [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_5, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, + Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; + +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) + + +/* SAS IO Unit Page 6 */ + +typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { + U8 CurrentStatus; /* 0x00 */ + U8 CurrentModulation; /* 0x01 */ + U8 CurrentUtilization; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 Reserved2; /* 0x04 */ +} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + Mpi2SasIOUnit6PortWidthModGroupStatus_t, + MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t; + +/* defines for CurrentStatus field */ +#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) +#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) +#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) +#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) +#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) +#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) + +/* defines for CurrentModulation field */ +#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) +#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) +#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) +#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX +#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U8 NumGroups; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS + PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, + Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t; + +#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 7 */ + +typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { + U8 Flags; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 Threshold75Pct; /* 0x04 */ + U8 Threshold50Pct; /* 0x05 */ + U8 Threshold25Pct; /* 0x06 */ + U8 Reserved3; /* 0x07 */ +} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + Mpi2SasIOUnit7PortWidthModGroupSettings_t, + MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t; + +/* defines for Flags field */ +#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX +#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 SamplingInterval; /* 0x08 */ + U8 WindowLength; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U8 NumGroups; /* 0x14 */ + U8 Reserved4; /* 0x15 */ + U16 Reserved5; /* 0x16 */ + MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS + PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, + Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t; + +#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 PowerManagementCapabilities;/* 0x0C */ + U32 Reserved2; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_8, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, + Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t; + +#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) + +/* defines for PowerManagementCapabilities field */ +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) + + + +/* SAS IO Unit Page 16 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U64 TimeStamp; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ + U32 FastPathPendedRequests; /* 0x18 */ + U32 FastPathUnPendedRequests; /* 0x1C */ + U32 FastPathHostRequestStarts; /* 0x20 */ + U32 FastPathFirmwareRequestStarts; /* 0x24 */ + U32 FastPathHostCompletions; /* 0x28 */ + U32 FastPathFirmwareCompletions; /* 0x2C */ + U32 NonFastPathRequestStarts; /* 0x30 */ + U32 NonFastPathHostCompletions; /* 0x30 */ +} MPI2_CONFIG_PAGE_SASIOUNIT16, +MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT16, +Mpi2SasIOUnitPage16_t, MPI2_POINTER pMpi2SasIOUnitPage16_t; + +#define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00) + + /**************************************************************************** * SAS Expander Config Pages ****************************************************************************/ @@ -1709,10 +2287,14 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 U64 ActiveZoneManagerSASAddress;/* 0x2C */ U16 ZoneLockInactivityLimit; /* 0x34 */ U16 Reserved1; /* 0x36 */ + U8 TimeToReducedFunc; /* 0x38 */ + U8 InitialTimeToReducedFunc; /* 0x39 */ + U8 MaxReducedFuncTime; /* 0x3A */ + U8 Reserved2; /* 0x3B */ } MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; -#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) +#define MPI2_SASEXPANDER0_PAGEVERSION (0x06) /* values for SAS Expander Page 0 DiscoveryStatus field */ #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) @@ -1737,6 +2319,7 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) /* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) @@ -1791,13 +2374,12 @@ typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ -/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ - /* values for SAS Expander Page 1 DiscoveryInfo field */ #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ /**************************************************************************** * SAS Device Config Pages @@ -1858,6 +2440,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ /* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) +#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) +#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) @@ -1914,6 +2499,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 #define MPI2_SASPHY0_PAGEVERSION (0x03) +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + /* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ /* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ @@ -1921,12 +2508,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 /* values for SAS PHY Page 0 Flags field */ #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) -/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ /* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ -/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ - /* SAS PHY Page 1 */ @@ -1944,6 +2529,153 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 #define MPI2_SASPHY1_PAGEVERSION (0x01) +/* SAS PHY Page 2 */ + +typedef struct _MPI2_SASPHY2_PHY_EVENT { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 PhyEventInfo; /* 0x04 */ +} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT, + Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t; + +/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */ + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY2_PHY_EVENT_MAX +#define MPI2_SASPHY2_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; + /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, + Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t; + +#define MPI2_SASPHY2_PAGEVERSION (0x00) + + +/* SAS PHY Page 3 */ + +typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 CounterType; /* 0x04 */ + U8 ThresholdWindow; /* 0x05 */ + U8 TimeUnits; /* 0x06 */ + U8 Reserved3; /* 0x07 */ + U32 EventThreshold; /* 0x08 */ + U16 ThresholdFlags; /* 0x0C */ + U16 Reserved4; /* 0x0E */ +} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG, + Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t; + +/* values for PhyEventCode field */ +#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2) + +/* values for the CounterType field */ +#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/* values for the TimeUnits field */ +#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/* values for the ThresholdFlags field */ +#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumPhyEvents at runtime. + */ +#ifndef MPI2_SASPHY3_PHY_EVENT_MAX +#define MPI2_SASPHY3_PHY_EVENT_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig + [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, + Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t; + +#define MPI2_SASPHY3_PAGEVERSION (0x00) + + +/* SAS PHY Page 4 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 Reserved1; /* 0x08 */ + U8 Reserved2; /* 0x0A */ + U8 Flags; /* 0x0B */ + U8 InitialFrame[28]; /* 0x0C */ +} MPI2_CONFIG_PAGE_SAS_PHY_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_4, + Mpi2SasPhyPage4_t, MPI2_POINTER pMpi2SasPhyPage4_t; + +#define MPI2_SASPHY4_PAGEVERSION (0x00) + +/* values for the Flags field */ +#define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02) +#define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01) + + + + /**************************************************************************** * SAS Port Config Pages ****************************************************************************/ @@ -2015,7 +2747,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumLogEntries at runtime. */ #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES #define MPI2_LOG_0_NUM_LOG_ENTRIES (1) @@ -2065,7 +2797,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumElements at runtime. */ #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) @@ -2147,5 +2879,142 @@ typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) +/**************************************************************************** +* Ethernet Config Pages +****************************************************************************/ + +/* Ethernet Page 0 */ + +/* IP address (union of IPv4 and IPv6) */ +typedef union _MPI2_ETHERNET_IP_ADDR { + U32 IPv4Addr; + U32 IPv6Addr[4]; +} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR, + Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t; + +#define MPI2_ETHERNET_HOST_NAME_LENGTH (32) + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumInterfaces; /* 0x08 */ + U8 Reserved0; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Status; /* 0x0C */ + U8 MediaState; /* 0x10 */ + U8 Reserved2; /* 0x11 */ + U16 Reserved3; /* 0x12 */ + U8 MacAddress[6]; /* 0x14 */ + U8 Reserved4; /* 0x1A */ + U8 Reserved5; /* 0x1B */ + MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */ + MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */ + MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */ + MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */ + MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */ + MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */ + U8 HostName + [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0, + Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t; + +#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00) + +/* values for Ethernet Page 0 Status field */ +#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000) +#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000) +#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000) +#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080) +#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040) +#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020) +#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010) +#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008) +#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004) +#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001) + +/* values for Ethernet Page 0 MediaState field */ +#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07) +#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00) +#define MPI2_ETHPG0_MS_10MBIT (0x01) +#define MPI2_ETHPG0_MS_100MBIT (0x02) +#define MPI2_ETHPG0_MS_1GBIT (0x03) + + +/* Ethernet Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved0; /* 0x08 */ + U32 Flags; /* 0x0C */ + U8 MediaState; /* 0x10 */ + U8 Reserved1; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 MacAddress[6]; /* 0x14 */ + U8 Reserved3; /* 0x1A */ + U8 Reserved4; /* 0x1B */ + MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */ + MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */ + MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */ + MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */ + MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */ + U32 Reserved5; /* 0x6C */ + U32 Reserved6; /* 0x70 */ + U32 Reserved7; /* 0x74 */ + U32 Reserved8; /* 0x78 */ + U8 HostName + [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */ +} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1, + Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t; + +#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00) + +/* values for Ethernet Page 1 Flags field */ +#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100) +#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080) +#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040) +#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020) +#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008) +#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004) +#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002) +#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001) + +/* values for Ethernet Page 1 MediaState field */ +#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80) +#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00) +#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80) + +#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07) +#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00) +#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01) +#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02) +#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03) + + +/**************************************************************************** +* Extended Manufacturing Config Pages +****************************************************************************/ + +/* + * Generic structure to use for product-specific extended manufacturing pages + * (currently Extended Manufacturing Page 40 through Extended Manufacturing + * Page 60). + */ + +typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo; /* 0x08 */ +} MPI2_CONFIG_PAGE_EXT_MAN_PS, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS, + Mpi2ExtManufacturingPagePS_t, + MPI2_POINTER pMpi2ExtManufacturingPagePS_t; + +/* PageVersion should be provided by product-specific code */ + #endif diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index f1115f0f0eb..9d284dae655 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_init.h * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.06 + * mpi2_init.h Version: 02.00.14 * * Version History * --------------- @@ -21,8 +21,22 @@ * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO * Control field Task Attribute flags. - * Moved LUN field defines to mpi2.h becasue they are + * Moved LUN field defines to mpi2.h because they are * common to many structures. + * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to + * Query Asynchronous Event. + * Defined two new bits in the SlotStatus field of the SCSI + * Enclosure Processor Request and Reply. + * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for + * both SCSI IO Error Reply and SCSI Task Management Reply. + * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. + * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. + * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. + * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. + * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. + * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command + * Priority to match SAM-4. + * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. * -------------------------------------------------------------------------- */ @@ -49,20 +63,6 @@ typedef struct } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; -/* TBD: I don't think this is needed for MPI2/Gen2 */ -#if 0 -typedef struct -{ - U8 CDB[16]; /* 0x00 */ - U32 DataLength; /* 0x10 */ - U32 PrimaryReferenceTag; /* 0x14 */ - U16 PrimaryApplicationTag; /* 0x18 */ - U16 PrimaryApplicationTagMask; /* 0x1A */ - U32 TransferLength; /* 0x1C */ -} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, - Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; -#endif - typedef union { U8 CDB32[32]; @@ -103,7 +103,13 @@ typedef struct _MPI2_SCSI_IO_REQUEST U8 LUN[8]; /* 0x34 */ U32 Control; /* 0x3C */ MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ + +#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */ + MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion; +#endif + MPI2_SGE_IO_UNION SGL; /* 0x60 */ + } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; @@ -137,6 +143,9 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) +/* number of SGLOffset fields */ +#define MPI2_SCSIIO_NUM_SGLOFFSETS (4) + /* SCSI IO IoFlags bits */ /* Large CDB Address Space */ @@ -181,6 +190,7 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24) #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) #define MPI2_SCSIIO_CONTROL_READ (0x02000000) @@ -188,6 +198,9 @@ typedef struct _MPI2_SCSI_IO_REQUEST #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) +/* alternate name for the previous field; called Command Priority in SAM-4 */ +#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11) #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) @@ -250,6 +263,11 @@ typedef struct _MPI2_SCSI_IO_REPLY #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) +/* masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSI_RI_SHIFT_REASONCODE (0) + #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) @@ -289,7 +307,11 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) -#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) + +/* obsolete TaskType name */ +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ + (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) /* MsgFlags bits */ @@ -319,6 +341,7 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U32 TerminationCount; /* 0x14 */ + U32 ResponseInfo; /* 0x18 */ } MPI2_SCSI_TASK_MANAGE_REPLY, MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; @@ -331,8 +354,20 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) +/* masks and shifts for the ResponseInfo field */ + +#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) +#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) +#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) +#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) + /**************************************************************************** * SCSI Enclosure Processor messages @@ -375,6 +410,8 @@ typedef struct _MPI2_SEP_REQUEST #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) @@ -410,6 +447,8 @@ typedef struct _MPI2_SEP_REPLY #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) +#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 8c5d81870c0..d159c5f24aa 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.10 + * mpi2_ioc.h Version: 02.00.22 * * Version History * --------------- @@ -79,6 +79,48 @@ * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. + * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. + * Added two new reason codes for SAS Device Status Change + * Event. + * Added new event: SAS PHY Counter. + * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. + * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Added new product id family for 2208. + * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. + * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. + * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. + * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. + * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. + * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. + * Added Host Based Discovery Phy Event data. + * Added defines for ProductID Product field + * (MPI2_FW_HEADER_PID_). + * Modified values for SAS ProductID Family + * (MPI2_FW_HEADER_PID_FAMILY_). + * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. + * Added PowerManagementControl Request structures and + * defines. + * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. + * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. + * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. + * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added + * SASNotifyPrimitiveMasks field to + * MPI2_EVENT_NOTIFICATION_REQUEST. + * Added Temperature Threshold Event. + * Added Host Message Event. + * Added Send Host Message request and reply. + * 05-25-11 02.00.18 For Extended Image Header, added + * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and + * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. + * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. + * 08-24-11 02.00.19 Added PhysicalPort field to + * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. + * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. + * 03-29-12 02.00.21 Added a product specific range to event values. + * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. + * Added ElapsedSeconds field to + * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * -------------------------------------------------------------------------- */ @@ -111,8 +153,10 @@ typedef struct _MPI2_IOC_INIT_REQUEST U16 MsgVersion; /* 0x0C */ U16 HeaderVersion; /* 0x0E */ U32 Reserved5; /* 0x10 */ - U32 Reserved6; /* 0x14 */ - U16 Reserved7; /* 0x18 */ + U16 Reserved6; /* 0x14 */ + U8 Reserved7; /* 0x16 */ + U8 HostMSIxVectors; /* 0x17 */ + U16 Reserved8; /* 0x18 */ U16 SystemRequestFrameSize; /* 0x1A */ U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ U16 ReplyFreeQueueDepth; /* 0x1E */ @@ -207,7 +251,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY U8 MaxChainDepth; /* 0x14 */ U8 WhoInit; /* 0x15 */ U8 NumberOfPorts; /* 0x16 */ - U8 Reserved2; /* 0x17 */ + U8 MaxMSIxVectors; /* 0x17 */ U16 RequestCredit; /* 0x18 */ U16 ProductID; /* 0x1A */ U32 IOCCapabilities; /* 0x1C */ @@ -225,7 +269,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY U8 MaxVolumes; /* 0x37 */ U16 MaxDevHandle; /* 0x38 */ U16 MaxPersistentEntries; /* 0x3A */ - U32 Reserved4; /* 0x3C */ + U16 MinDevHandle; /* 0x3C */ + U16 Reserved4; /* 0x3E */ } MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; @@ -242,6 +287,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /* IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) @@ -261,12 +307,16 @@ typedef struct _MPI2_IOC_FACTS_REPLY /* ProductID field uses MPI2_FW_HEADER_PID_ */ /* IOCCapabilities */ +#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) +#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) +#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) @@ -389,7 +439,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST U32 Reserved6; /* 0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ U16 SASBroadcastPrimitiveMasks; /* 0x24 */ - U16 Reserved7; /* 0x26 */ + U16 SASNotifyPrimitiveMasks; /* 0x26 */ U32 Reserved8; /* 0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, @@ -427,7 +477,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_STATE_CHANGE (0x0002) #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) #define MPI2_EVENT_EVENT_CHANGE (0x000A) -#define MPI2_EVENT_TASK_SET_FULL (0x000E) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) #define MPI2_EVENT_SAS_DISCOVERY (0x0016) @@ -440,7 +490,15 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) - +#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) +#define MPI2_EVENT_GPIO_INTERRUPT (0x0023) +#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) +#define MPI2_EVENT_SAS_QUIESCE (0x0025) +#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) +#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) +#define MPI2_EVENT_HOST_MESSAGE (0x0028) +#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) +#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) /* Log Entry Added Event data */ @@ -461,6 +519,49 @@ typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; +/* GPIO Interrupt Event data */ + +typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { + U8 GPIONum; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_EVENT_DATA_GPIO_INTERRUPT, + MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, + Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; + +/* Temperature Threshold Event data */ + +typedef struct _MPI2_EVENT_DATA_TEMPERATURE { + U16 Status; /* 0x00 */ + U8 SensorNum; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U16 CurrentTemperature; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ +} MPI2_EVENT_DATA_TEMPERATURE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, +Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; + +/* Temperature Threshold Event data Status bits */ +#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) +#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) +#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) +#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) + + +/* Host Message Event data */ + +typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { + U8 SourceVF_ID; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ + U32 HostData[1]; /* 0x08 */ +} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, +Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; + + /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED @@ -474,6 +575,7 @@ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED MPI2_POINTER pMpi2EventDataHardResetReceived_t; /* Task Set Full Event data */ +/* this event is obsolete */ typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { @@ -489,7 +591,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ - U8 Reserved1; /* 0x03 */ + U8 PhysicalPort; /* 0x03 */ U8 ASC; /* 0x04 */ U8 ASCQ; /* 0x05 */ U16 DevHandle; /* 0x06 */ @@ -502,17 +604,19 @@ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; /* SAS Device Status Change Event data ReasonCode values */ -#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) -#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) -#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) -#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) -#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) -#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) -#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) -#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) -#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) +#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) /* Integrated RAID Operation Status Event data */ @@ -524,7 +628,7 @@ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS U8 RAIDOperation; /* 0x04 */ U8 PercentComplete; /* 0x05 */ U16 Reserved2; /* 0x06 */ - U32 Resereved3; /* 0x08 */ + U32 ElapsedSeconds; /* 0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, @@ -700,6 +804,24 @@ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) +/* SAS Notify Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 Reserved1; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +Mpi2EventDataSasNotifyPrimitive_t, +MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) +#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) +#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) +#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) + /* SAS Initiator Device Status Change Event data */ @@ -768,6 +890,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; /* values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) @@ -785,6 +908,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) @@ -822,6 +946,91 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) +/* SAS PHY Counter Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 PhyEventCode; /* 0x0C */ + U8 PhyNum; /* 0x0D */ + U16 Reserved2; /* 0x0E */ + U32 PhyEventInfo; /* 0x10 */ + U8 CounterType; /* 0x14 */ + U8 ThresholdWindow; /* 0x15 */ + U8 TimeUnits; /* 0x16 */ + U8 Reserved3; /* 0x17 */ + U32 EventThreshold; /* 0x18 */ + U16 ThresholdFlags; /* 0x1C */ + U16 Reserved4; /* 0x1E */ +} MPI2_EVENT_DATA_SAS_PHY_COUNTER, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, + Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; + +/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the + * PhyEventCode field + * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the + * CounterType field + * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the + * TimeUnits field + * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the + * ThresholdFlags field + * */ + + +/* SAS Quiesce Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { + U8 ReasonCode; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_QUIESCE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, + Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; + +/* SAS Quiesce Event data ReasonCode values */ +#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) + + +/* Host Based Discovery Phy Event data */ + +typedef struct _MPI2_EVENT_HBD_PHY_SAS { + U8 Flags; /* 0x00 */ + U8 NegotiatedLinkRate; /* 0x01 */ + U8 PhyNum; /* 0x02 */ + U8 PhysicalPort; /* 0x03 */ + U32 Reserved1; /* 0x04 */ + U8 InitialFrame[28]; /* 0x08 */ +} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS, + Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t; + +/* values for the Flags field */ +#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) +#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) + +/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for + * the NegotiatedLinkRate field */ + +typedef union _MPI2_EVENT_HBD_DESCRIPTOR { + MPI2_EVENT_HBD_PHY_SAS Sas; +} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR, + Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t; + +typedef struct _MPI2_EVENT_DATA_HBD_PHY { + U8 DescriptorType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ + MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */ +} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY, + Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t; + +/* values for the DescriptorType field */ +#define MPI2_EVENT_HBD_DT_SAS (0x01) + + + /**************************************************************************** * EventAck message ****************************************************************************/ @@ -865,6 +1074,53 @@ typedef struct _MPI2_EVENT_ACK_REPLY /**************************************************************************** +* SendHostMessage message +****************************************************************************/ + +/* SendHostMessage Request message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { + U16 HostDataLength; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 Reserved4; /* 0x0C */ + U8 DestVF_ID; /* 0x0D */ + U16 Reserved5; /* 0x0E */ + U32 Reserved6; /* 0x10 */ + U32 Reserved7; /* 0x14 */ + U32 Reserved8; /* 0x18 */ + U32 Reserved9; /* 0x1C */ + U32 Reserved10; /* 0x20 */ + U32 HostData[1]; /* 0x24 */ +} MPI2_SEND_HOST_MESSAGE_REQUEST, +MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, +Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; + + +/* SendHostMessage Reply message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { + U16 HostDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, +Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; + + +/**************************************************************************** * FWDownload message ****************************************************************************/ @@ -895,7 +1151,9 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) /* FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE @@ -1070,12 +1328,16 @@ typedef struct _MPI2_FW_IMAGE_HEADER #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) #define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) -#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) -#define MPI2_FW_HEADER_PID_PROD_A (0x0000) +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) +#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) +#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) + #define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) /* SAS */ -#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010) +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) +#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) /* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ @@ -1117,16 +1379,18 @@ typedef struct _MPI2_EXT_IMAGE_HEADER #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) /* defines for the ImageType field */ -#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) -#define MPI2_EXT_IMAGE_TYPE_FW (0x01) -#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) -#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) -#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) -#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) -#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) -#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) - -#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) +#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) +#define MPI2_EXT_IMAGE_TYPE_MAX \ + (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */ @@ -1291,5 +1555,100 @@ typedef struct _MPI2_INIT_IMAGE_FOOTER #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) +/**************************************************************************** +* PowerManagementControl message +****************************************************************************/ + +/* PowerManagementControl Request message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { + U8 Feature; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Parameter1; /* 0x0C */ + U8 Parameter2; /* 0x0D */ + U8 Parameter3; /* 0x0E */ + U8 Parameter4; /* 0x0F */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ +} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, + Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; + +/* defines for the Feature field */ +#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) +#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) +#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */ +#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ +/* Parameter1 contains a PHY number */ +/* Parameter2 indicates power condition action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) +#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) +#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) +/* Parameter3 and Parameter4 are reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION + * Feature */ +/* Parameter1 contains SAS port width modulation group number */ +/* Parameter2 indicates IOC action using these defines */ +#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) +#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) +#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) +/* Parameter3 indicates desired modulation level using these defines */ +#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) +#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) +#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) +#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) +/* Parameter4 is reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ +/* Parameter1 indicates desired PCIe link speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */ +/* Parameter2 indicates desired PCIe link width using these defines */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */ +#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */ +/* Parameter3 and Parameter4 are reserved */ + +/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ +/* Parameter1 indicates desired IOC hardware clock speed using these defines */ +#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) +#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) +#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) +#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) +/* Parameter2, Parameter3, and Parameter4 are reserved */ + + +/* PowerManagementControl Reply message */ +typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { + U8 Feature; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, + Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; + + #endif diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h index 7134816d904..0d202a2c6db 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_raid.h * Title: MPI Integrated RAID messages and structures * Creation Date: April 26, 2007 * - * mpi2_raid.h Version: 02.00.03 + * mpi2_raid.h Version: 02.00.09 * * Version History * --------------- @@ -20,6 +20,15 @@ * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT * can be sized by the build environment. + * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of + * VolumeCreationFlags and marked the old one as obsolete. + * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. + * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with + * related structures and defines. + * Added product-specific range to RAID Action values. + * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. + * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. + * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. * -------------------------------------------------------------------------- */ @@ -173,7 +182,10 @@ typedef struct _MPI2_RAID_ACTION_REQUEST #define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) #define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) #define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) - +#define MPI2_RAID_ACTION_COMPATIBILITY_CHECK (0x23) +#define MPI2_RAID_ACTION_PHYSDISK_HIDDEN (0x24) +#define MPI2_RAID_ACTION_MIN_PRODUCT_SPECIFIC (0x80) +#define MPI2_RAID_ACTION_MAX_PRODUCT_SPECIFIC (0xFF) /* RAID Volume Creation Structure */ @@ -217,10 +229,14 @@ typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT /* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ /* defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001) +/* The following is an obsolete define. + * It must be shifted left 24 bits in order to set the proper bit. + */ #define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) -#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x04) -#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x02) -#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x01) /* RAID Online Capacity Expansion Structure */ @@ -237,6 +253,23 @@ typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION Mpi2RaidOnlineCapacityExpansion_t, MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t; +/* RAID Compatibility Input Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_INPUT_STRUCT { + U16 SourceDevHandle; /* 0x00 */ + U16 CandidateDevHandle; /* 0x02 */ + U32 Flags; /* 0x04 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ +} MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, +MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_INPUT_STRUCT, +Mpi2RaidCompatibilityInputStruct_t, +MPI2_POINTER pMpi2RaidCompatibilityInputStruct_t; + +/* defines for RAID Compatibility Structure Flags field */ +#define MPI2_RAID_COMPAT_SOURCE_IS_VOLUME_FLAG (0x00000002) +#define MPI2_RAID_COMPAT_REPORT_SOURCE_INFO_FLAG (0x00000001) + /* RAID Volume Indicator Structure */ @@ -245,25 +278,59 @@ typedef struct _MPI2_RAID_VOL_INDICATOR U64 TotalBlocks; /* 0x00 */ U64 BlocksRemaining; /* 0x08 */ U32 Flags; /* 0x10 */ + U32 ElapsedSeconds; /* 0x14 */ } MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR, Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t; /* defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000) + #define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) #define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) #define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) #define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) #define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) - +#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004) + +/* RAID Compatibility Result Structure */ + +typedef struct _MPI2_RAID_COMPATIBILITY_RESULT_STRUCT { + U8 State; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 GenericAttributes; /* 0x04 */ + U32 OEMSpecificAttributes; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + U32 Reserved4; /* 0x10 */ +} MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, +MPI2_POINTER PTR_MPI2_RAID_COMPATIBILITY_RESULT_STRUCT, +Mpi2RaidCompatibilityResultStruct_t, +MPI2_POINTER pMpi2RaidCompatibilityResultStruct_t; + +/* defines for RAID Compatibility Result Structure State field */ +#define MPI2_RAID_COMPAT_STATE_COMPATIBLE (0x00) +#define MPI2_RAID_COMPAT_STATE_NOT_COMPATIBLE (0x01) + +/* defines for RAID Compatibility Result Structure GenericAttributes field */ +#define MPI2_RAID_COMPAT_GENATTRIB_4K_SECTOR (0x00000010) + +#define MPI2_RAID_COMPAT_GENATTRIB_MEDIA_MASK (0x0000000C) +#define MPI2_RAID_COMPAT_GENATTRIB_SOLID_STATE_DRIVE (0x00000008) +#define MPI2_RAID_COMPAT_GENATTRIB_HARD_DISK_DRIVE (0x00000004) + +#define MPI2_RAID_COMPAT_GENATTRIB_PROTOCOL_MASK (0x00000003) +#define MPI2_RAID_COMPAT_GENATTRIB_SAS_PROTOCOL (0x00000002) +#define MPI2_RAID_COMPAT_GENATTRIB_SATA_PROTOCOL (0x00000001) /* RAID Action Reply ActionData union */ typedef union _MPI2_RAID_ACTION_REPLY_DATA { - U32 Word[5]; - MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; - U16 VolDevHandle; - U8 VolumeState; - U8 PhysDiskNum; + U32 Word[6]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; + MPI2_RAID_COMPATIBILITY_RESULT_STRUCT RaidCompatibilityResult; } MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA, Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t; diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h index 8a42b136cf5..50b39ccd526 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2007 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: February 9, 2007 * - * mpi2.h Version: 02.00.02 + * mpi2_sas.h Version: 02.00.05 * * Version History * --------------- @@ -18,6 +18,10 @@ * Control Request. * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control * Request. + * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST + * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. + * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. * -------------------------------------------------------------------------- */ @@ -108,7 +112,7 @@ typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST /* values for PassthroughFlags field */ #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* SMP Passthrough Reply Message */ @@ -160,7 +164,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST U32 Reserved4; /* 0x14 */ U32 DataLength; /* 0x18 */ U8 CommandFIS[20]; /* 0x1C */ - MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ + MPI2_SGE_IO_UNION SGL; /* 0x30 */ } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; @@ -172,7 +176,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) -/* values for SGLFlags field are in the SGL section of mpi2.h */ +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /* SATA Passthrough Reply Message */ @@ -243,6 +247,8 @@ typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) +#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 2ff4e936bd3..11b2ac4e7c6 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2008 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_tool.h * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.02 + * mpi2_tool.h Version: 02.00.10 * * Version History * --------------- @@ -17,6 +17,18 @@ * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release * structures and defines. * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. + * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request + * and reply messages. + * Added MPI2_DIAG_BUF_TYPE_EXTENDED. + * Incremented MPI2_DIAG_BUF_TYPE_COUNT. + * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. + * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer + * Post Request. + * 05-25-11 02.00.07 Added Flags field and related defines to + * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. + * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that + * it uses MPI Chain SGE as well as MPI Simple SGE. * -------------------------------------------------------------------------- */ @@ -32,7 +44,11 @@ /* defines for the Tools */ #define MPI2_TOOLBOX_CLEAN_TOOL (0x00) #define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) +#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) #define MPI2_TOOLBOX_BEACON_TOOL (0x05) +#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06) + /**************************************************************************** * Toolbox reply @@ -94,8 +110,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST * Toolbox Memory Move request ****************************************************************************/ -typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST -{ +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST { U8 Tool; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ @@ -112,6 +127,118 @@ typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST /**************************************************************************** +* Toolbox Diagnostic Data Upload request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 SGLFlags; /* 0x0C */ + U8 Reserved5; /* 0x0D */ + U16 Reserved6; /* 0x0E */ + U32 Flags; /* 0x10 */ + U32 DataLength; /* 0x14 */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */ +} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, +MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, +Mpi2ToolboxDiagDataUploadRequest_t, +MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t; + +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + + +typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER { + U32 DiagDataLength; /* 00h */ + U8 FormatCode; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ +} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER, +Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t; + + +/**************************************************************************** +* Toolbox ISTWI Read Write Tool +****************************************************************************/ + +/* Toolbox ISTWI Read Write Tool request message */ +typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + U8 DevIndex; /* 0x14 */ + U8 Action; /* 0x15 */ + U8 SGLFlags; /* 0x16 */ + U8 Flags; /* 0x17 */ + U16 TxDataLength; /* 0x18 */ + U16 RxDataLength; /* 0x1A */ + U32 Reserved8; /* 0x1C */ + U32 Reserved9; /* 0x20 */ + U32 Reserved10; /* 0x24 */ + U32 Reserved11; /* 0x28 */ + U32 Reserved12; /* 0x2C */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */ +} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST, + Mpi2ToolboxIstwiReadWriteRequest_t, + MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t; + +/* values for the Action field */ +#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01) +#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02) +#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03) +#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10) +#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11) +#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12) + +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/* values for the Flags field */ +#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80) +#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07) + +/* Toolbox ISTWI Read Write Tool reply message */ +typedef struct _MPI2_TOOLBOX_ISTWI_REPLY { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 DevIndex; /* 0x14 */ + U8 Action; /* 0x15 */ + U8 IstwiStatus; /* 0x16 */ + U8 Reserved6; /* 0x17 */ + U16 TxDataCount; /* 0x18 */ + U16 RxDataCount; /* 0x1A */ +} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY, + Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t; + + +/**************************************************************************** * Toolbox Beacon Tool request ****************************************************************************/ @@ -139,6 +266,61 @@ typedef struct _MPI2_TOOLBOX_BEACON_REQUEST #define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) +/**************************************************************************** +* Toolbox Diagnostic CLI Tool +****************************************************************************/ + +#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C) + +/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 SGLFlags; /* 0x0C */ + U8 Reserved5; /* 0x0D */ + U16 Reserved6; /* 0x0E */ + U32 DataLength; /* 0x10 */ + U8 DiagnosticCliCommand + [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */ + MPI2_MPI_SGE_IO_UNION SGL; /* 0x70 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST, + Mpi2ToolboxDiagnosticCliRequest_t, + MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t; + +/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + + +/* Toolbox Diagnostic CLI Tool reply message */ +typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY { + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 ReturnedDataLength; /* 0x14 */ +} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY, + MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY, + Mpi2ToolboxDiagnosticCliReply_t, + MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t; + + /***************************************************************************** * * Diagnostic Buffer Messages @@ -152,7 +334,7 @@ typedef struct _MPI2_TOOLBOX_BEACON_REQUEST typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST { - U8 Reserved1; /* 0x00 */ + U8 ExtendedType; /* 0x00 */ U8 BufferType; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ @@ -171,11 +353,19 @@ typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST } MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST, Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t; +/* values for the ExtendedType field */ +#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02) + /* values for the BufferType field */ #define MPI2_DIAG_BUF_TYPE_TRACE (0x00) #define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02) /* count of the number of buffer types */ -#define MPI2_DIAG_BUF_TYPE_COUNT (0x02) +#define MPI2_DIAG_BUF_TYPE_COUNT (0x03) + +/* values for the Flags field */ +#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002) +#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001) /**************************************************************************** @@ -184,7 +374,7 @@ typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST typedef struct _MPI2_DIAG_BUFFER_POST_REPLY { - U8 Reserved1; /* 0x00 */ + U8 ExtendedType; /* 0x00 */ U8 BufferType; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h index cfde017bf16..0b128b68a5e 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_type.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_type.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2007 LSI Corporation. + * Copyright (c) 2000-2013 LSI Corporation. * * * Name: mpi2_type.h |