aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/mac_esp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mac_esp.c')
-rw-r--r--drivers/scsi/mac_esp.c1095
1 files changed, 491 insertions, 604 deletions
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index c94c8db8465..994fc5caf03 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -1,754 +1,641 @@
-/*
- * 68k mac 53c9[46] scsi driver
+/* mac_esp.c: ESP front-end for Macintosh Quadra systems.
*
- * copyright (c) 1998, David Weis weisd3458@uni.edu
+ * Adapted from jazz_esp.c and the old mac_esp.c.
*
- * debugging on Quadra 800 and 660AV Michael Schmitz, Dave Kilzer 7/98
+ * The pseudo DMA algorithm is based on the one used in NetBSD.
+ * See sys/arch/mac68k/obio/esp.c for some background information.
*
- * based loosely on cyber_esp.c
+ * Copyright (C) 2007-2008 Finn Thain
*/
-/* these are unused for now */
-#define myreadl(addr) (*(volatile unsigned int *) (addr))
-#define mywritel(b, addr) ((*(volatile unsigned int *) (addr)) = (b))
-
-
#include <linux/kernel.h>
-#include <linux/delay.h>
#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/nubus.h>
+#include <linux/slab.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "NCR53C9x.h"
-
-#include <asm/io.h>
-
-#include <asm/setup.h>
#include <asm/irq.h>
+#include <asm/dma.h>
#include <asm/macints.h>
-#include <asm/machw.h>
+#include <asm/macintosh.h>
#include <asm/mac_via.h>
-#include <asm/pgtable.h>
-
-#include <asm/macintosh.h>
+#include <scsi/scsi_host.h>
-/* #define DEBUG_MAC_ESP */
-
-#define mac_turnon_irq(x) mac_enable_irq(x)
-#define mac_turnoff_irq(x) mac_disable_irq(x)
-
-extern void esp_handle(struct NCR_ESP *esp);
-extern void mac_esp_intr(int irq, void *dev_id, struct pt_regs *pregs);
-
-static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count);
-static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd *sp);
-static void dma_dump_state(struct NCR_ESP * esp);
-static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length);
-static void dma_ints_off(struct NCR_ESP * esp);
-static void dma_ints_on(struct NCR_ESP * esp);
-static int dma_irq_p(struct NCR_ESP * esp);
-static int dma_irq_p_quick(struct NCR_ESP * esp);
-static void dma_led_off(struct NCR_ESP * esp);
-static void dma_led_on(struct NCR_ESP *esp);
-static int dma_ports_p(struct NCR_ESP *esp);
-static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write);
-static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write);
-
-static int esp_dafb_dma_irq_p(struct NCR_ESP * espdev);
-static int esp_iosb_dma_irq_p(struct NCR_ESP * espdev);
-
-static volatile unsigned char cmd_buffer[16];
- /* This is where all commands are put
- * before they are transferred to the ESP chip
- * via PIO.
- */
-
-static int esp_initialized = 0;
-
-static int setup_num_esps = -1;
-static int setup_disconnect = -1;
-static int setup_nosync = -1;
-static int setup_can_queue = -1;
-static int setup_cmd_per_lun = -1;
-static int setup_sg_tablesize = -1;
-#ifdef SUPPORT_TAGS
-static int setup_use_tagged_queuing = -1;
-#endif
-static int setup_hostid = -1;
+#include "esp_scsi.h"
+
+#define DRV_MODULE_NAME "mac_esp"
+#define PFX DRV_MODULE_NAME ": "
+#define DRV_VERSION "1.000"
+#define DRV_MODULE_RELDATE "Sept 15, 2007"
+
+#define MAC_ESP_IO_BASE 0x50F00000
+#define MAC_ESP_REGS_QUADRA (MAC_ESP_IO_BASE + 0x10000)
+#define MAC_ESP_REGS_QUADRA2 (MAC_ESP_IO_BASE + 0xF000)
+#define MAC_ESP_REGS_QUADRA3 (MAC_ESP_IO_BASE + 0x18000)
+#define MAC_ESP_REGS_SPACING 0x402
+#define MAC_ESP_PDMA_REG 0xF9800024
+#define MAC_ESP_PDMA_REG_SPACING 0x4
+#define MAC_ESP_PDMA_IO_OFFSET 0x100
+
+#define esp_read8(REG) mac_esp_read8(esp, REG)
+#define esp_write8(VAL, REG) mac_esp_write8(esp, VAL, REG)
+
+struct mac_esp_priv {
+ struct esp *esp;
+ void __iomem *pdma_regs;
+ void __iomem *pdma_io;
+ int error;
+};
+static struct esp *esp_chips[2];
-/*
- * Experimental ESP inthandler; check macints.c to make sure dev_id is
- * set up properly!
- */
+#define MAC_ESP_GET_PRIV(esp) ((struct mac_esp_priv *) \
+ platform_get_drvdata((struct platform_device *) \
+ (esp->dev)))
-void mac_esp_intr(int irq, void *dev_id, struct pt_regs *pregs)
+static inline void mac_esp_write8(struct esp *esp, u8 val, unsigned long reg)
{
- struct NCR_ESP *esp = (struct NCR_ESP *) dev_id;
- int irq_p = 0;
-
- /* Handle the one ESP interrupt showing at this IRQ level. */
- if(((esp)->irq & 0xff) == irq) {
- /*
- * Debug ..
- */
- irq_p = esp->dma_irq_p(esp);
- printk("mac_esp: irq_p %x current %p disconnected %p\n",
- irq_p, esp->current_SC, esp->disconnected_SC);
-
- /*
- * Mac: if we're here, it's an ESP interrupt for sure!
- */
- if((esp->current_SC || esp->disconnected_SC)) {
- esp->dma_ints_off(esp);
-
- ESPIRQ(("I%d(", esp->esp_id));
- esp_handle(esp);
- ESPIRQ((")"));
+ nubus_writeb(val, esp->regs + reg * 16);
+}
- esp->dma_ints_on(esp);
- }
- }
+static inline u8 mac_esp_read8(struct esp *esp, unsigned long reg)
+{
+ return nubus_readb(esp->regs + reg * 16);
}
-/*
- * Debug hooks; use for playing with the interrupt flag testing and interrupt
- * acknowledge on the various machines
+/* For pseudo DMA and PIO we need the virtual address
+ * so this address mapping is the identity mapping.
*/
-void scsi_esp_polled(int irq, void *dev_id, struct pt_regs *pregs)
+static dma_addr_t mac_esp_map_single(struct esp *esp, void *buf,
+ size_t sz, int dir)
{
- if (esp_initialized == 0)
- return;
-
- mac_esp_intr(irq, dev_id, pregs);
+ return (dma_addr_t)buf;
}
-void fake_intr(int irq, void *dev_id, struct pt_regs *pregs)
+static int mac_esp_map_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: got irq\n");
-#endif
+ int i;
- mac_esp_intr(irq, dev_id, pregs);
+ for (i = 0; i < num_sg; i++)
+ sg[i].dma_address = (u32)sg_virt(&sg[i]);
+ return num_sg;
}
-irqreturn_t fake_drq(int irq, void *dev_id, struct pt_regs *pregs)
+static void mac_esp_unmap_single(struct esp *esp, dma_addr_t addr,
+ size_t sz, int dir)
{
- printk("mac_esp: got drq\n");
- return IRQ_HANDLED;
+ /* Nothing to do. */
}
-#define DRIVER_SETUP
-
-/*
- * Function : mac_esp_setup(char *str)
- *
- * Purpose : booter command line initialization of the overrides array,
- *
- * Inputs : str - parameters, separated by commas.
- *
- * Currently unused in the new driver; need to add settable parameters to the
- * detect function.
- *
- */
+static void mac_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
+{
+ /* Nothing to do. */
+}
-static int __init mac_esp_setup(char *str) {
-#ifdef DRIVER_SETUP
- /* Format of mac53c9x parameter is:
- * mac53c9x=<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
- * Negative values mean don't change.
- */
-
- char *this_opt;
- long opt;
+static void mac_esp_reset_dma(struct esp *esp)
+{
+ /* Nothing to do. */
+}
- this_opt = strsep (&str, ",");
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
+static void mac_esp_dma_drain(struct esp *esp)
+{
+ /* Nothing to do. */
+}
- if (opt >= 0 && opt <= 2)
- setup_num_esps = opt;
- else if (opt > 2)
- printk( "mac_esp_setup: invalid number of hosts %ld !\n", opt );
+static void mac_esp_dma_invalidate(struct esp *esp)
+{
+ /* Nothing to do. */
+}
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt > 0)
- setup_disconnect = opt;
+static int mac_esp_dma_error(struct esp *esp)
+{
+ return MAC_ESP_GET_PRIV(esp)->error;
+}
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
+static inline int mac_esp_wait_for_empty_fifo(struct esp *esp)
+{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
+ int i = 500000;
- if (opt >= 0)
- setup_nosync = opt;
+ do {
+ if (!(esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES))
+ return 0;
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
+ if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
+ return 1;
- if (opt > 0)
- setup_can_queue = opt;
+ udelay(2);
+ } while (--i);
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
+ printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n",
+ esp_read8(ESP_STATUS));
+ mep->error = 1;
+ return 1;
+}
- if (opt > 0)
- setup_cmd_per_lun = opt;
+static inline int mac_esp_wait_for_dreq(struct esp *esp)
+{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
+ int i = 500000;
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
-
- if (opt >= 0) {
- setup_sg_tablesize = opt;
- /* Must be <= SG_ALL (255) */
- if (setup_sg_tablesize > SG_ALL)
- setup_sg_tablesize = SG_ALL;
+ do {
+ if (mep->pdma_regs == NULL) {
+ if (via2_scsi_drq_pending())
+ return 0;
+ } else {
+ if (nubus_readl(mep->pdma_regs) & 0x200)
+ return 0;
}
- this_opt = strsep (&str, ",");
- }
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
+ if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
+ return 1;
- /* Must be between 0 and 7 */
- if (opt >= 0 && opt <= 7)
- setup_hostid = opt;
- else if (opt > 7)
- printk( "mac_esp_setup: invalid host ID %ld !\n", opt);
+ udelay(2);
+ } while (--i);
- this_opt = strsep (&str, ",");
- }
-#ifdef SUPPORT_TAGS
- if(this_opt) {
- opt = simple_strtol( this_opt, NULL, 0 );
- if (opt >= 0)
- setup_use_tagged_queuing = !!opt;
- }
-#endif
-#endif
- return 1;
+ printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n",
+ esp_read8(ESP_STATUS));
+ mep->error = 1;
+ return 1;
}
-__setup("mac53c9x=", mac_esp_setup);
+#define MAC_ESP_PDMA_LOOP(operands) \
+ asm volatile ( \
+ " tstw %1 \n" \
+ " jbeq 20f \n" \
+ "1: movew " operands " \n" \
+ "2: movew " operands " \n" \
+ "3: movew " operands " \n" \
+ "4: movew " operands " \n" \
+ "5: movew " operands " \n" \
+ "6: movew " operands " \n" \
+ "7: movew " operands " \n" \
+ "8: movew " operands " \n" \
+ "9: movew " operands " \n" \
+ "10: movew " operands " \n" \
+ "11: movew " operands " \n" \
+ "12: movew " operands " \n" \
+ "13: movew " operands " \n" \
+ "14: movew " operands " \n" \
+ "15: movew " operands " \n" \
+ "16: movew " operands " \n" \
+ " subqw #1,%1 \n" \
+ " jbne 1b \n" \
+ "20: tstw %2 \n" \
+ " jbeq 30f \n" \
+ "21: movew " operands " \n" \
+ " subqw #1,%2 \n" \
+ " jbne 21b \n" \
+ "30: tstw %3 \n" \
+ " jbeq 40f \n" \
+ "31: moveb " operands " \n" \
+ "32: nop \n" \
+ "40: \n" \
+ " \n" \
+ " .section __ex_table,\"a\" \n" \
+ " .align 4 \n" \
+ " .long 1b,40b \n" \
+ " .long 2b,40b \n" \
+ " .long 3b,40b \n" \
+ " .long 4b,40b \n" \
+ " .long 5b,40b \n" \
+ " .long 6b,40b \n" \
+ " .long 7b,40b \n" \
+ " .long 8b,40b \n" \
+ " .long 9b,40b \n" \
+ " .long 10b,40b \n" \
+ " .long 11b,40b \n" \
+ " .long 12b,40b \n" \
+ " .long 13b,40b \n" \
+ " .long 14b,40b \n" \
+ " .long 15b,40b \n" \
+ " .long 16b,40b \n" \
+ " .long 21b,40b \n" \
+ " .long 31b,40b \n" \
+ " .long 32b,40b \n" \
+ " .previous \n" \
+ : "+a" (addr), "+r" (count32), "+r" (count2) \
+ : "g" (count1), "a" (mep->pdma_io))
+
+static void mac_esp_send_pdma_cmd(struct esp *esp, u32 addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd)
+{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
+ mep->error = 0;
-/*
- * ESP address 'detection'
- */
+ if (!write)
+ scsi_esp_cmd(esp, ESP_CMD_FLUSH);
-unsigned long get_base(int chip_num)
-{
- /*
- * using the chip_num and mac model, figure out where the
- * chips are mapped
- */
-
- unsigned long io_base = 0x50f00000;
- unsigned int second_offset = 0x402;
- unsigned long scsi_loc = 0;
+ esp_write8((esp_count >> 0) & 0xFF, ESP_TCLOW);
+ esp_write8((esp_count >> 8) & 0xFF, ESP_TCMED);
- switch (macintosh_config->scsi_type) {
+ scsi_esp_cmd(esp, cmd);
- /* 950, 900, 700 */
- case MAC_SCSI_QUADRA2:
- scsi_loc = io_base + 0xf000 + ((chip_num == 0) ? 0 : second_offset);
- break;
+ do {
+ unsigned int count32 = esp_count >> 5;
+ unsigned int count2 = (esp_count & 0x1F) >> 1;
+ unsigned int count1 = esp_count & 1;
+ unsigned int start_addr = addr;
- /* av's */
- case MAC_SCSI_QUADRA3:
- scsi_loc = io_base + 0x18000 + ((chip_num == 0) ? 0 : second_offset);
- break;
+ if (mac_esp_wait_for_dreq(esp))
+ break;
- /* most quadra/centris models are like this */
- case MAC_SCSI_QUADRA:
- scsi_loc = io_base + 0x10000;
- break;
+ if (write) {
+ MAC_ESP_PDMA_LOOP("%4@,%0@+");
- default:
- printk("mac_esp: get_base: hit default!\n");
- scsi_loc = io_base + 0x10000;
- break;
+ esp_count -= addr - start_addr;
+ } else {
+ unsigned int n;
- } /* switch */
+ MAC_ESP_PDMA_LOOP("%0@+,%4@");
- printk("mac_esp: io base at 0x%lx\n", scsi_loc);
+ if (mac_esp_wait_for_empty_fifo(esp))
+ break;
- return scsi_loc;
+ n = (esp_read8(ESP_TCMED) << 8) + esp_read8(ESP_TCLOW);
+ addr = start_addr + esp_count - n;
+ esp_count = n;
+ }
+ } while (esp_count);
}
/*
- * Model dependent ESP setup
+ * Programmed IO routines follow.
*/
-int mac_esp_detect(Scsi_Host_Template * tpnt)
+static inline unsigned int mac_esp_wait_for_fifo(struct esp *esp)
{
- int quick = 0;
- int chipnum, chipspresent = 0;
-#if 0
- unsigned long timeout;
-#endif
+ int i = 500000;
- if (esp_initialized > 0)
- return -ENODEV;
+ do {
+ unsigned int fbytes = esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES;
- /* what do we have in this machine... */
- if (MACHW_PRESENT(MAC_SCSI_96)) {
- chipspresent ++;
- }
+ if (fbytes)
+ return fbytes;
- if (MACHW_PRESENT(MAC_SCSI_96_2)) {
- chipspresent ++;
- }
+ udelay(2);
+ } while (--i);
- /* number of ESPs present ? */
- if (setup_num_esps >= 0) {
- if (chipspresent >= setup_num_esps)
- chipspresent = setup_num_esps;
- else
- printk("mac_esp_detect: num_hosts detected %d setup %d \n",
- chipspresent, setup_num_esps);
- }
-
- /* TODO: add disconnect / nosync flags */
-
- /* setup variables */
- tpnt->can_queue =
- (setup_can_queue > 0) ? setup_can_queue : 7;
- tpnt->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : 1;
- tpnt->sg_tablesize =
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_ALL;
-
- if (setup_hostid >= 0)
- tpnt->this_id = setup_hostid;
- else {
- /* use 7 as default */
- tpnt->this_id = 7;
- }
-
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
-#endif
+ printk(KERN_ERR PFX "FIFO is empty (sreg %02x)\n",
+ esp_read8(ESP_STATUS));
+ return 0;
+}
- for (chipnum = 0; chipnum < chipspresent; chipnum ++) {
- struct NCR_ESP * esp;
+static inline int mac_esp_wait_for_intr(struct esp *esp)
+{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
+ int i = 500000;
- esp = esp_allocate(tpnt, (void *) NULL);
- esp->eregs = (struct ESP_regs *) get_base(chipnum);
+ do {
+ esp->sreg = esp_read8(ESP_STATUS);
+ if (esp->sreg & ESP_STAT_INTR)
+ return 0;
- esp->dma_irq_p = &esp_dafb_dma_irq_p;
- if (chipnum == 0) {
+ udelay(2);
+ } while (--i);
- if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) {
- /* most machines except those below :-) */
- quick = 1;
- esp->dma_irq_p = &esp_iosb_dma_irq_p;
- } else if (macintosh_config->scsi_type == MAC_SCSI_QUADRA3) {
- /* mostly av's */
- quick = 0;
- } else {
- /* q950, 900, 700 */
- quick = 1;
- out_be32(0xf9800024, 0x1d1);
- esp->dregs = (void *) 0xf9800024;
- }
+ printk(KERN_ERR PFX "IRQ timeout (sreg %02x)\n", esp->sreg);
+ mep->error = 1;
+ return 1;
+}
- } else { /* chipnum */
+#define MAC_ESP_PIO_LOOP(operands, reg1) \
+ asm volatile ( \
+ "1: moveb " operands " \n" \
+ " subqw #1,%1 \n" \
+ " jbne 1b \n" \
+ : "+a" (addr), "+r" (reg1) \
+ : "a" (fifo))
+
+#define MAC_ESP_PIO_FILL(operands, reg1) \
+ asm volatile ( \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " moveb " operands " \n" \
+ " subqw #8,%1 \n" \
+ " subqw #8,%1 \n" \
+ : "+a" (addr), "+r" (reg1) \
+ : "a" (fifo))
+
+#define MAC_ESP_FIFO_SIZE 16
+
+static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd)
+{
+ struct mac_esp_priv *mep = MAC_ESP_GET_PRIV(esp);
+ u8 *fifo = esp->regs + ESP_FDATA * 16;
- quick = 1;
- out_be32(0xf9800028, 0x1d1);
- esp->dregs = (void *) 0xf9800028;
+ cmd &= ~ESP_CMD_DMA;
+ mep->error = 0;
- } /* chipnum == 0 */
+ if (write) {
+ scsi_esp_cmd(esp, cmd);
- /* use pio for command bytes; pio for message/data: TBI */
- esp->do_pio_cmds = 1;
+ while (1) {
+ unsigned int n;
- /* Set the command buffer */
- esp->esp_command = (volatile unsigned char*) cmd_buffer;
- esp->esp_command_dvma = (__u32) cmd_buffer;
+ n = mac_esp_wait_for_fifo(esp);
+ if (!n)
+ break;
- /* various functions */
- esp->dma_bytes_sent = &dma_bytes_sent;
- esp->dma_can_transfer = &dma_can_transfer;
- esp->dma_dump_state = &dma_dump_state;
- esp->dma_init_read = NULL;
- esp->dma_init_write = NULL;
- esp->dma_ints_off = &dma_ints_off;
- esp->dma_ints_on = &dma_ints_on;
+ if (n > esp_count)
+ n = esp_count;
+ esp_count -= n;
- esp->dma_ports_p = &dma_ports_p;
+ MAC_ESP_PIO_LOOP("%2@,%0@+", n);
+ if (!esp_count)
+ break;
- /* Optional functions */
- esp->dma_barrier = NULL;
- esp->dma_drain = NULL;
- esp->dma_invalidate = NULL;
- esp->dma_irq_entry = NULL;
- esp->dma_irq_exit = NULL;
- esp->dma_led_on = NULL;
- esp->dma_led_off = NULL;
- esp->dma_poll = NULL;
- esp->dma_reset = NULL;
+ if (mac_esp_wait_for_intr(esp))
+ break;
- /* SCSI chip speed */
- /* below esp->cfreq = 40000000; */
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DIP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP))
+ break;
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
+ break;
- if (quick) {
- /* 'quick' means there's handshake glue logic like in the 5380 case */
- esp->dma_setup = &dma_setup_quick;
- } else {
- esp->dma_setup = &dma_setup;
+ scsi_esp_cmd(esp, ESP_CMD_TI);
}
+ } else {
+ scsi_esp_cmd(esp, ESP_CMD_FLUSH);
- if (chipnum == 0) {
-
- esp->irq = IRQ_MAC_SCSI;
+ if (esp_count >= MAC_ESP_FIFO_SIZE)
+ MAC_ESP_PIO_FILL("%0@+,%2@", esp_count);
+ else
+ MAC_ESP_PIO_LOOP("%0@+,%2@", esp_count);
- request_irq(IRQ_MAC_SCSI, esp_intr, 0, "Mac ESP SCSI", esp->ehost);
-#if 0 /* conflicts with IOP ADB */
- request_irq(IRQ_MAC_SCSIDRQ, fake_drq, 0, "Mac ESP DRQ", esp->ehost);
-#endif
+ scsi_esp_cmd(esp, cmd);
- if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) {
- esp->cfreq = 16500000;
- } else {
- esp->cfreq = 25000000;
- }
+ while (esp_count) {
+ unsigned int n;
+ if (mac_esp_wait_for_intr(esp))
+ break;
- } else { /* chipnum == 1 */
+ if (((esp->sreg & ESP_STAT_PMASK) != ESP_DOP) &&
+ ((esp->sreg & ESP_STAT_PMASK) != ESP_MOP))
+ break;
- esp->irq = IRQ_MAC_SCSIDRQ;
-#if 0 /* conflicts with IOP ADB */
- request_irq(IRQ_MAC_SCSIDRQ, esp_intr, 0, "Mac ESP SCSI 2", esp->ehost);
-#endif
+ esp->ireg = esp_read8(ESP_INTRPT);
+ if ((esp->ireg & (ESP_INTR_DC | ESP_INTR_BSERV)) !=
+ ESP_INTR_BSERV)
+ break;
- esp->cfreq = 25000000;
+ n = MAC_ESP_FIFO_SIZE -
+ (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES);
+ if (n > esp_count)
+ n = esp_count;
- }
+ if (n == MAC_ESP_FIFO_SIZE) {
+ MAC_ESP_PIO_FILL("%0@+,%2@", esp_count);
+ } else {
+ esp_count -= n;
+ MAC_ESP_PIO_LOOP("%0@+,%2@", n);
+ }
- if (quick) {
- printk("esp: using quick version\n");
+ scsi_esp_cmd(esp, ESP_CMD_TI);
}
-
- printk("esp: addr at 0x%p\n", esp->eregs);
-
- esp->scsi_id = 7;
- esp->diff = 0;
-
- esp_initialize(esp);
-
- } /* for chipnum */
-
- if (chipspresent)
- printk("\nmac_esp: %d esp controllers found\n", chipspresent);
-
- esp_initialized = chipspresent;
-
- return chipspresent;
+ }
}
-static int mac_esp_release(struct Scsi_Host *shost)
+static int mac_esp_irq_pending(struct esp *esp)
{
- if (shost->irq)
- free_irq(shost->irq, NULL);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
- scsi_unregister(shost);
+ if (esp_read8(ESP_STATUS) & ESP_STAT_INTR)
+ return 1;
return 0;
}
-/*
- * I've been wondering what this is supposed to do, for some time. Talking
- * to Allen Briggs: These machines have an extra register someplace where the
- * DRQ pin of the ESP can be monitored. That isn't useful for determining
- * anything else (such as reselect interrupt or other magic) though.
- * Maybe make the semantics should be changed like
- * if (esp->current_SC)
- * ... check DRQ flag ...
- * else
- * ... disconnected, check pending VIA interrupt ...
- *
- * There's a problem with using the dabf flag or mac_irq_pending() here: both
- * seem to return 1 even though no interrupt is currently pending, resulting
- * in esp_exec_cmd() holding off the next command, and possibly infinite loops
- * in esp_intr().
- * Short term fix: just use esp_status & ESP_STAT_INTR here, as long as we
- * use simple PIO. The DRQ status will be important when implementing pseudo
- * DMA mode (set up ESP transfer count, return, do a batch of bytes in PIO or
- * 'hardware handshake' mode upon DRQ).
- * If you plan on changing this (i.e. to save the esp_status register access in
- * favor of a VIA register access or a shadow register for the IFR), make sure
- * to try a debug version of this first to monitor what registers would be a good
- * indicator of the ESP interrupt.
- */
-
-static int esp_dafb_dma_irq_p(struct NCR_ESP * esp)
+static u32 mac_esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len)
{
- unsigned int ret;
- int sreg = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: esp_dafb_dma_irq_p dafb %d irq %d\n",
- readl(esp->dregs), mac_irq_pending(IRQ_MAC_SCSI));
-#endif
-
- sreg &= ESP_STAT_INTR;
-
- /*
- * maybe working; this is essentially what's used for iosb_dma_irq_p
- */
- if (sreg)
- return 1;
- else
- return 0;
-
- /*
- * didn't work ...
- */
-#if 0
- if (esp->current_SC)
- ret = readl(esp->dregs) & 0x200;
- else if (esp->disconnected_SC)
- ret = 1; /* sreg ?? */
- else
- ret = mac_irq_pending(IRQ_MAC_SCSI);
-
- return(ret);
-#endif
-
+ return dma_len > 0xFFFF ? 0xFFFF : dma_len;
}
-/*
- * See above: testing mac_irq_pending always returned 8 (SCSI IRQ) regardless
- * of the actual ESP status.
- */
-
-static int esp_iosb_dma_irq_p(struct NCR_ESP * esp)
+static irqreturn_t mac_scsi_esp_intr(int irq, void *dev_id)
{
- int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ);
- int sreg = esp_read(esp->eregs->esp_status);
+ int got_intr;
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n",
- mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI),
- sreg, esp->current_SC, esp->disconnected_SC);
-#endif
+ /*
+ * This is an edge triggered IRQ, so we have to be careful to
+ * avoid missing a transition when it is shared by two ESP devices.
+ */
- sreg &= ESP_STAT_INTR;
+ do {
+ got_intr = 0;
+ if (esp_chips[0] &&
+ (mac_esp_read8(esp_chips[0], ESP_STATUS) & ESP_STAT_INTR)) {
+ (void)scsi_esp_intr(irq, esp_chips[0]);
+ got_intr = 1;
+ }
+ if (esp_chips[1] &&
+ (mac_esp_read8(esp_chips[1], ESP_STATUS) & ESP_STAT_INTR)) {
+ (void)scsi_esp_intr(irq, esp_chips[1]);
+ got_intr = 1;
+ }
+ } while (got_intr);
- if (sreg)
- return (sreg);
- else
- return 0;
+ return IRQ_HANDLED;
}
-/*
- * This seems to be OK for PIO at least ... usually 0 after PIO.
- */
+static struct esp_driver_ops mac_esp_ops = {
+ .esp_write8 = mac_esp_write8,
+ .esp_read8 = mac_esp_read8,
+ .map_single = mac_esp_map_single,
+ .map_sg = mac_esp_map_sg,
+ .unmap_single = mac_esp_unmap_single,
+ .unmap_sg = mac_esp_unmap_sg,
+ .irq_pending = mac_esp_irq_pending,
+ .dma_length_limit = mac_esp_dma_length_limit,
+ .reset_dma = mac_esp_reset_dma,
+ .dma_drain = mac_esp_dma_drain,
+ .dma_invalidate = mac_esp_dma_invalidate,
+ .send_dma_cmd = mac_esp_send_pdma_cmd,
+ .dma_error = mac_esp_dma_error,
+};
-static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count)
+static int esp_mac_probe(struct platform_device *dev)
{
+ struct scsi_host_template *tpnt = &scsi_esp_template;
+ struct Scsi_Host *host;
+ struct esp *esp;
+ int err;
+ struct mac_esp_priv *mep;
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma bytes sent = %x\n", fifo_count);
-#endif
+ if (!MACH_IS_MAC)
+ return -ENODEV;
- return fifo_count;
-}
+ if (dev->id > 1)
+ return -ENODEV;
-/*
- * dma_can_transfer is used to switch between DMA and PIO, if DMA (pseudo)
- * is ever implemented. Returning 0 here will use PIO.
- */
+ host = scsi_host_alloc(tpnt, sizeof(struct esp));
-static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd * sp)
-{
- unsigned long sz = sp->SCp.this_residual;
-#if 0 /* no DMA yet; make conditional */
- if (sz > 0x10000000) {
- sz = 0x10000000;
- }
- printk("mac_esp: dma can transfer = 0lx%x\n", sz);
-#else
+ err = -ENOMEM;
+ if (!host)
+ goto fail;
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: pio to transfer = %ld\n", sz);
-#endif
+ host->max_id = 8;
+ host->use_clustering = DISABLE_CLUSTERING;
+ esp = shost_priv(host);
- sz = 0;
-#endif
- return sz;
-}
+ esp->host = host;
+ esp->dev = dev;
-/*
- * Not yet ...
- */
+ esp->command_block = kzalloc(16, GFP_KERNEL);
+ if (!esp->command_block)
+ goto fail_unlink;
+ esp->command_block_dma = (dma_addr_t)esp->command_block;
-static void dma_dump_state(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_dump_state: called\n");
-#endif
-#if 0
- ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
- esp->esp_id, ((struct mac_dma_registers *)
- (esp->dregs))->cond_reg));
-#endif
-}
+ esp->scsi_id = 7;
+ host->this_id = esp->scsi_id;
+ esp->scsi_id_mask = 1 << esp->scsi_id;
-/*
- * DMA setup: should be used to set up the ESP transfer count for pseudo
- * DMA transfers; need a DRQ transfer function to do the actual transfer
- */
-
-static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length)
-{
- printk("mac_esp: dma_init_read\n");
-}
-
-
-static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length)
-{
- printk("mac_esp: dma_init_write\n");
-}
-
-
-static void dma_ints_off(struct NCR_ESP * esp)
-{
- mac_turnoff_irq(esp->irq);
-}
+ mep = kzalloc(sizeof(struct mac_esp_priv), GFP_KERNEL);
+ if (!mep)
+ goto fail_free_command_block;
+ mep->esp = esp;
+ platform_set_drvdata(dev, mep);
+ switch (macintosh_config->scsi_type) {
+ case MAC_SCSI_QUADRA:
+ esp->cfreq = 16500000;
+ esp->regs = (void __iomem *)MAC_ESP_REGS_QUADRA;
+ mep->pdma_io = esp->regs + MAC_ESP_PDMA_IO_OFFSET;
+ mep->pdma_regs = NULL;
+ break;
+ case MAC_SCSI_QUADRA2:
+ esp->cfreq = 25000000;
+ esp->regs = (void __iomem *)(MAC_ESP_REGS_QUADRA2 +
+ dev->id * MAC_ESP_REGS_SPACING);
+ mep->pdma_io = esp->regs + MAC_ESP_PDMA_IO_OFFSET;
+ mep->pdma_regs = (void __iomem *)(MAC_ESP_PDMA_REG +
+ dev->id * MAC_ESP_PDMA_REG_SPACING);
+ nubus_writel(0x1d1, mep->pdma_regs);
+ break;
+ case MAC_SCSI_QUADRA3:
+ /* These quadras have a real DMA controller (the PSC) but we
+ * don't know how to drive it so we must use PIO instead.
+ */
+ esp->cfreq = 25000000;
+ esp->regs = (void __iomem *)MAC_ESP_REGS_QUADRA3;
+ mep->pdma_io = NULL;
+ mep->pdma_regs = NULL;
+ break;
+ }
-static void dma_ints_on(struct NCR_ESP * esp)
-{
- mac_turnon_irq(esp->irq);
-}
+ esp->ops = &mac_esp_ops;
+ if (mep->pdma_io == NULL) {
+ printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id);
+ esp_write8(0, ESP_TCLOW);
+ esp_write8(0, ESP_TCMED);
+ esp->flags = ESP_FLAG_DISABLE_SYNC;
+ mac_esp_ops.send_dma_cmd = mac_esp_send_pio_cmd;
+ } else {
+ printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id);
+ }
-/*
- * generic dma_irq_p(), unused
- */
+ host->irq = IRQ_MAC_SCSI;
+ esp_chips[dev->id] = esp;
+ mb();
+ if (esp_chips[!dev->id] == NULL) {
+ err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
+ if (err < 0) {
+ esp_chips[dev->id] = NULL;
+ goto fail_free_priv;
+ }
+ }
-static int dma_irq_p(struct NCR_ESP * esp)
-{
- int i = esp_read(esp->eregs->esp_status);
+ err = scsi_esp_register(esp, &dev->dev);
+ if (err)
+ goto fail_free_irq;
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p status %d\n", i);
-#endif
+ return 0;
- return (i & ESP_STAT_INTR);
+fail_free_irq:
+ if (esp_chips[!dev->id] == NULL)
+ free_irq(host->irq, esp);
+fail_free_priv:
+ kfree(mep);
+fail_free_command_block:
+ kfree(esp->command_block);
+fail_unlink:
+ scsi_host_put(host);
+fail:
+ return err;
}
-static int dma_irq_p_quick(struct NCR_ESP * esp)
+static int esp_mac_remove(struct platform_device *dev)
{
- /*
- * Copied from iosb_dma_irq_p()
- */
- int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ);
- int sreg = esp_read(esp->eregs->esp_status);
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n",
- mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI),
- sreg, esp->current_SC, esp->disconnected_SC);
-#endif
+ struct mac_esp_priv *mep = platform_get_drvdata(dev);
+ struct esp *esp = mep->esp;
+ unsigned int irq = esp->host->irq;
- sreg &= ESP_STAT_INTR;
+ scsi_esp_unregister(esp);
- if (sreg)
- return (sreg);
- else
- return 0;
-
-}
-
-static void dma_led_off(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_led_off: called\n");
-#endif
-}
+ esp_chips[dev->id] = NULL;
+ if (!(esp_chips[0] || esp_chips[1]))
+ free_irq(irq, NULL);
+ kfree(mep);
-static void dma_led_on(struct NCR_ESP * esp)
-{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_led_on: called\n");
-#endif
-}
+ kfree(esp->command_block);
+ scsi_host_put(esp->host);
-static int dma_ports_p(struct NCR_ESP * esp)
-{
return 0;
}
+static struct platform_driver esp_mac_driver = {
+ .probe = esp_mac_probe,
+ .remove = esp_mac_remove,
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
-static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write)
+static int __init mac_esp_init(void)
{
-
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_setup\n");
-#endif
-
- if (write) {
- dma_init_read(esp, (char *) addr, count);
- } else {
- dma_init_write(esp, (char *) addr, count);
- }
+ return platform_driver_register(&esp_mac_driver);
}
-
-static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write)
+static void __exit mac_esp_exit(void)
{
-#ifdef DEBUG_MAC_ESP
- printk("mac_esp: dma_setup_quick\n");
-#endif
+ platform_driver_unregister(&esp_mac_driver);
}
-static Scsi_Host_Template driver_template = {
- .proc_name = "mac_esp",
- .name = "Mac 53C9x SCSI",
- .detect = mac_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = mac_esp_release,
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING
-};
-
-
-#include "scsi_module.c"
+MODULE_DESCRIPTION("Mac ESP SCSI driver");
+MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
-MODULE_LICENSE("GPL");
+module_init(mac_esp_init);
+module_exit(mac_esp_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-05 23:18:51 +0000