diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.h | 124 |
1 files changed, 92 insertions, 32 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 883938652a6..edb48832c39 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2007 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -29,27 +29,59 @@ typedef enum _lpfc_ctx_cmd { LPFC_CTX_HOST } lpfc_ctx_cmd; +struct lpfc_cq_event { + struct list_head list; + union { + struct lpfc_mcqe mcqe_cmpl; + struct lpfc_acqe_link acqe_link; + struct lpfc_acqe_fip acqe_fip; + struct lpfc_acqe_dcbx acqe_dcbx; + struct lpfc_acqe_grp5 acqe_grp5; + struct lpfc_acqe_fc_la acqe_fc; + struct lpfc_acqe_sli acqe_sli; + struct lpfc_rcqe rcqe_cmpl; + struct sli4_wcqe_xri_aborted wcqe_axri; + struct lpfc_wcqe_complete wcqe_cmpl; + } cqe; +}; + /* This structure is used to handle IOCB requests / responses */ struct lpfc_iocbq { /* lpfc_iocbqs are used in double linked lists */ struct list_head list; struct list_head clist; + struct list_head dlist; uint16_t iotag; /* pre-assigned IO tag */ - uint16_t rsvd1; + uint16_t sli4_lxritag; /* logical pre-assigned XRI. */ + uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */ + struct lpfc_cq_event cq_event; IOCB_t iocb; /* IOCB cmd */ uint8_t retry; /* retry counter for IOCB cmd - if needed */ - uint8_t iocb_flag; + uint32_t iocb_flag; #define LPFC_IO_LIBDFC 1 /* libdfc iocb */ -#define LPFC_IO_WAKE 2 /* High Priority Queue signal flag */ +#define LPFC_IO_WAKE 2 /* Synchronous I/O completed */ +#define LPFC_IO_WAKE_TMO LPFC_IO_WAKE /* Synchronous I/O timed out */ #define LPFC_IO_FCP 4 /* FCP command -- iocbq in scsi_buf */ #define LPFC_DRIVER_ABORTED 8 /* driver aborted this request */ #define LPFC_IO_FABRIC 0x10 /* Iocb send using fabric scheduler */ #define LPFC_DELAY_MEM_FREE 0x20 /* Defer free'ing of FC data */ +#define LPFC_EXCHANGE_BUSY 0x40 /* SLI4 hba reported XB in response */ +#define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */ +#define DSS_SECURITY_OP 0x100 /* security IO */ +#define LPFC_IO_ON_TXCMPLQ 0x200 /* The IO is still on the TXCMPLQ */ +#define LPFC_IO_DIF_PASS 0x400 /* T10 DIF IO pass-thru prot */ +#define LPFC_IO_DIF_STRIP 0x800 /* T10 DIF IO strip prot */ +#define LPFC_IO_DIF_INSERT 0x1000 /* T10 DIF IO insert prot */ +#define LPFC_IO_CMD_OUTSTANDING 0x2000 /* timeout handler abort window */ + +#define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */ +#define LPFC_FIP_ELS_ID_SHIFT 14 + +#define LPFC_IO_OAS 0x10000 /* OAS FCP IO */ - uint8_t abort_count; - uint8_t rsvd2; uint32_t drvrTimeout; /* driver timeout in seconds */ + uint32_t fcp_wqidx; /* index to FCP work queue */ struct lpfc_vport *vport;/* virtual port pointer */ void *context1; /* caller context information */ void *context2; /* caller context information */ @@ -59,13 +91,15 @@ struct lpfc_iocbq { struct lpfc_iocbq *rsp_iocb; struct lpfcMboxq *mbox; struct lpfc_nodelist *ndlp; + struct lpfc_node_rrq *rrq; } context_un; void (*fabric_iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *); + void (*wait_iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *, + struct lpfc_iocbq *); void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *); - }; #define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */ @@ -81,23 +115,32 @@ struct lpfc_iocbq { typedef struct lpfcMboxq { /* MBOXQs are used in single linked lists */ struct list_head list; /* ptr to next mailbox command */ - MAILBOX_t mb; /* Mailbox cmd */ - struct lpfc_vport *vport;/* virutal port pointer */ + union { + MAILBOX_t mb; /* Mailbox cmd */ + struct lpfc_mqe mqe; + } u; + struct lpfc_vport *vport;/* virtual port pointer */ void *context1; /* caller context information */ void *context2; /* caller context information */ void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *); uint8_t mbox_flag; - + uint16_t in_ext_byte_len; + uint16_t out_ext_byte_len; + uint8_t mbox_offset_word; + struct lpfc_mcqe mcqe; + struct lpfc_mbx_nembed_sge_virt *sge_array; } LPFC_MBOXQ_t; #define MBX_POLL 1 /* poll mailbox till command done, then return */ #define MBX_NOWAIT 2 /* issue command then return immediately */ -#define LPFC_MAX_RING_MASK 4 /* max num of rctl/type masks allowed per +#define LPFC_MAX_RING_MASK 5 /* max num of rctl/type masks allowed per ring */ -#define LPFC_MAX_RING 4 /* max num of SLI rings used by driver */ +#define LPFC_SLI3_MAX_RING 4 /* Max num of SLI3 rings used by driver. + For SLI4, an additional ring for each + FCP WQ will be allocated. */ struct lpfc_sli_ring; @@ -124,6 +167,24 @@ struct lpfc_sli_ring_stat { uint64_t iocb_rsp_full; /* IOCB rsp ring full */ }; +struct lpfc_sli3_ring { + uint32_t local_getidx; /* last available cmd index (from cmdGetInx) */ + uint32_t next_cmdidx; /* next_cmd index */ + uint32_t rspidx; /* current index in response ring */ + uint32_t cmdidx; /* current index in command ring */ + uint16_t numCiocb; /* number of command iocb's per ring */ + uint16_t numRiocb; /* number of rsp iocb's per ring */ + uint16_t sizeCiocb; /* Size of command iocb's in this ring */ + uint16_t sizeRiocb; /* Size of response iocb's in this ring */ + uint32_t *cmdringaddr; /* virtual address for cmd rings */ + uint32_t *rspringaddr; /* virtual address for rsp rings */ +}; + +struct lpfc_sli4_ring { + struct lpfc_queue *wqp; /* Pointer to associated WQ */ +}; + + /* Structure used to hold SLI ring information */ struct lpfc_sli_ring { uint16_t flag; /* ring flags */ @@ -132,16 +193,10 @@ struct lpfc_sli_ring { #define LPFC_STOP_IOCB_EVENT 0x020 /* Stop processing IOCB cmds event */ uint16_t abtsiotag; /* tracks next iotag to use for ABTS */ - uint32_t local_getidx; /* last available cmd index (from cmdGetInx) */ - uint32_t next_cmdidx; /* next_cmd index */ - uint32_t rspidx; /* current index in response ring */ - uint32_t cmdidx; /* current index in command ring */ uint8_t rsvd; uint8_t ringno; /* ring number */ - uint16_t numCiocb; /* number of command iocb's per ring */ - uint16_t numRiocb; /* number of rsp iocb's per ring */ - uint16_t sizeCiocb; /* Size of command iocb's in this ring */ - uint16_t sizeRiocb; /* Size of response iocb's in this ring */ + + spinlock_t ring_lock; /* lock for issuing commands */ uint32_t fast_iotag; /* max fastlookup based iotag */ uint32_t iotag_ctr; /* keeps track of the next iotag to use */ @@ -152,8 +207,6 @@ struct lpfc_sli_ring { struct list_head txcmplq; uint16_t txcmplq_cnt; /* current length of queue */ uint16_t txcmplq_max; /* max length */ - uint32_t *cmdringaddr; /* virtual address for cmd rings */ - uint32_t *rspringaddr; /* virtual address for rsp rings */ uint32_t missbufcnt; /* keep track of buffers to post */ struct list_head postbufq; uint16_t postbufq_cnt; /* current length of queue */ @@ -173,6 +226,10 @@ struct lpfc_sli_ring { /* cmd ring available */ void (*lpfc_sli_cmd_available) (struct lpfc_hba *, struct lpfc_sli_ring *); + union { + struct lpfc_sli3_ring sli3; + struct lpfc_sli4_ring sli4; + } sli; }; /* Structure used for configuring rings to a specific profile or rctl / type */ @@ -205,6 +262,8 @@ struct lpfc_sli_stat { uint64_t mbox_stat_err; /* Mbox cmds completed status error */ uint64_t mbox_cmd; /* Mailbox commands issued */ uint64_t sli_intr; /* Count of Host Attention interrupts */ + uint64_t sli_prev_intr; /* Previous cnt of Host Attention interrupts */ + uint64_t sli_ips; /* Host Attention interrupts per sec */ uint32_t err_attn_event; /* Error Attn event counters */ uint32_t link_event; /* Link event counters */ uint32_t mbox_event; /* Mailbox event counters */ @@ -230,12 +289,13 @@ struct lpfc_sli { /* Additional sli_flags */ #define LPFC_SLI_MBOX_ACTIVE 0x100 /* HBA mailbox is currently active */ -#define LPFC_SLI2_ACTIVE 0x200 /* SLI2 overlay in firmware is active */ +#define LPFC_SLI_ACTIVE 0x200 /* SLI in firmware is active */ #define LPFC_PROCESS_LA 0x400 /* Able to process link attention */ #define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */ #define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */ +#define LPFC_SLI_ASYNC_MBX_BLK 0x2000 /* Async mailbox is blocked */ - struct lpfc_sli_ring ring[LPFC_MAX_RING]; + struct lpfc_sli_ring *ring; int fcp_ring; /* ring used for FCP initiator commands */ int next_ring; @@ -259,11 +319,11 @@ struct lpfc_sli { struct lpfc_lnk_stat lnk_stat_offsets; }; -#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox - command */ -#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write - * or erase cmds. This is especially - * long because of the potential of - * multiple flash erases that can be - * spawned. - */ +/* Timeout for normal outstanding mbox command (Seconds) */ +#define LPFC_MBOX_TMO 30 +/* Timeout for non-flash-based outstanding sli_config mbox command (Seconds) */ +#define LPFC_MBOX_SLI4_CONFIG_TMO 60 +/* Timeout for flash-based outstanding sli_config mbox command (Seconds) */ +#define LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO 300 +/* Timeout for other flash-based outstanding mbox command (Seconds) */ +#define LPFC_MBOX_TMO_FLASH_CMD 300 |