diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_scsi.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 3752 |
1 files changed, 3083 insertions, 669 deletions
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a246410ce9d..2df11daad85 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2009 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -19,9 +19,13 @@ * included with this package. * *******************************************************************/ #include <linux/pci.h> +#include <linux/slab.h> #include <linux/interrupt.h> +#include <linux/export.h> #include <linux/delay.h> #include <asm/unaligned.h> +#include <linux/crc-t10dif.h> +#include <net/checksum.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -37,8 +41,8 @@ #include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" -#include "lpfc_scsi.h" #include "lpfc.h" +#include "lpfc_scsi.h" #include "lpfc_logmsg.h" #include "lpfc_crtn.h" #include "lpfc_vport.h" @@ -46,21 +50,41 @@ #define LPFC_RESET_WAIT 2 #define LPFC_ABORT_WAIT 2 -int _dump_buf_done; +int _dump_buf_done = 1; static char *dif_op_str[] = { - "SCSI_PROT_NORMAL", - "SCSI_PROT_READ_INSERT", - "SCSI_PROT_WRITE_STRIP", - "SCSI_PROT_READ_STRIP", - "SCSI_PROT_WRITE_INSERT", - "SCSI_PROT_READ_PASS", - "SCSI_PROT_WRITE_PASS", + "PROT_NORMAL", + "PROT_READ_INSERT", + "PROT_WRITE_STRIP", + "PROT_READ_STRIP", + "PROT_WRITE_INSERT", + "PROT_READ_PASS", + "PROT_WRITE_PASS", }; + +struct scsi_dif_tuple { + __be16 guard_tag; /* Checksum */ + __be16 app_tag; /* Opaque storage */ + __be32 ref_tag; /* Target LBA or indirect LBA */ +}; + +static struct lpfc_rport_data * +lpfc_rport_data_from_scsi_device(struct scsi_device *sdev) +{ + struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata; + + if (vport->phba->cfg_fof) + return ((struct lpfc_device_data *)sdev->hostdata)->rport_data; + else + return (struct lpfc_rport_data *)sdev->hostdata; +} + static void lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); static void lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb); +static int +lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc); static void lpfc_debug_save_data(struct lpfc_hba *phba, struct scsi_cmnd *cmnd) @@ -119,6 +143,30 @@ lpfc_debug_save_dif(struct lpfc_hba *phba, struct scsi_cmnd *cmnd) } } +static inline unsigned +lpfc_cmd_blksize(struct scsi_cmnd *sc) +{ + return sc->device->sector_size; +} + +#define LPFC_CHECK_PROTECT_GUARD 1 +#define LPFC_CHECK_PROTECT_REF 2 +static inline unsigned +lpfc_cmd_protect(struct scsi_cmnd *sc, int flag) +{ + return 1; +} + +static inline unsigned +lpfc_cmd_guard_csum(struct scsi_cmnd *sc) +{ + if (lpfc_prot_group_type(NULL, sc) == LPFC_PG_TYPE_NO_DIF) + return 0; + if (scsi_host_get_guard(sc->device->host) == SHOST_DIX_GUARD_IP) + return 1; + return 0; +} + /** * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge. * @phba: Pointer to HBA object. @@ -168,6 +216,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) spin_lock_irqsave(shost->host_lock, flags); if (!vport->stat_data_enabled || vport->stat_data_blocked || + !pnode || !pnode->lat_data || (phba->bucket_type == LPFC_NO_BUCKET)) { spin_unlock_irqrestore(shost->host_lock, flags); @@ -266,9 +315,27 @@ lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) unsigned long new_queue_depth, old_queue_depth; old_queue_depth = sdev->queue_depth; - scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + + switch (reason) { + case SCSI_QDEPTH_DEFAULT: + /* change request from sysfs, fall through */ + case SCSI_QDEPTH_RAMP_UP: + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + break; + case SCSI_QDEPTH_QFULL: + if (scsi_track_queue_full(sdev, qdepth) == 0) + return sdev->queue_depth; + + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "0711 detected queue full - lun queue " + "depth adjusted to %d.\n", sdev->queue_depth); + break; + default: + return -EOPNOTSUPP; + } + new_queue_depth = sdev->queue_depth; - rdata = sdev->hostdata; + rdata = lpfc_rport_data_from_scsi_device(sdev); if (rdata) lpfc_send_sdev_queuedepth_change_event(phba, vport, rdata->pnode, sdev->lun, @@ -278,6 +345,26 @@ lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) } /** + * lpfc_change_queue_type() - Change a device's scsi tag queuing type + * @sdev: Pointer the scsi device whose queue depth is to change + * @tag_type: Identifier for queue tag type + */ +static int +lpfc_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} + +/** * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread * @phba: The Hba for which this call is being executed. * @@ -319,50 +406,6 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) } /** - * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread - * @phba: The Hba for which this call is being executed. - * - * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine - * post at most 1 event every 5 minute after last_ramp_up_time or - * last_rsrc_error_time. This routine wakes up worker thread of @phba - * to process WORKER_RAM_DOWN_EVENT event. - * - * This routine should be called with no lock held. - **/ -static inline void -lpfc_rampup_queue_depth(struct lpfc_vport *vport, - uint32_t queue_depth) -{ - unsigned long flags; - struct lpfc_hba *phba = vport->phba; - uint32_t evt_posted; - atomic_inc(&phba->num_cmd_success); - - if (vport->cfg_lun_queue_depth <= queue_depth) - return; - spin_lock_irqsave(&phba->hbalock, flags); - if (time_before(jiffies, - phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) || - time_before(jiffies, - phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL)) { - spin_unlock_irqrestore(&phba->hbalock, flags); - return; - } - phba->last_ramp_up_time = jiffies; - spin_unlock_irqrestore(&phba->hbalock, flags); - - spin_lock_irqsave(&phba->pport->work_port_lock, flags); - evt_posted = phba->pport->work_port_events & WORKER_RAMP_UP_QUEUE; - if (!evt_posted) - phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE; - spin_unlock_irqrestore(&phba->pport->work_port_lock, flags); - - if (!evt_posted) - lpfc_worker_wake_up(phba); - return; -} - -/** * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler * @phba: The Hba for which this call is being executed. * @@ -383,6 +426,14 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) num_rsrc_err = atomic_read(&phba->num_rsrc_err); num_cmd_success = atomic_read(&phba->num_cmd_success); + /* + * The error and success command counters are global per + * driver instance. If another handler has already + * operated on this error event, just exit. + */ + if (num_rsrc_err == 0) + return; + vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { @@ -406,41 +457,6 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler - * @phba: The Hba for which this call is being executed. - * - * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker - * thread.This routine increases queue depth for all scsi device on each vport - * associated with @phba by 1. This routine also sets @phba num_rsrc_err and - * num_cmd_success to zero. - **/ -void -lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) -{ - struct lpfc_vport **vports; - struct Scsi_Host *shost; - struct scsi_device *sdev; - int i; - - vports = lpfc_create_vport_work_array(phba); - if (vports != NULL) - for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { - shost = lpfc_shost_from_vport(vports[i]); - shost_for_each_device(sdev, shost) { - if (vports[i]->cfg_lun_queue_depth <= - sdev->queue_depth) - continue; - lpfc_change_queue_depth(sdev, - sdev->queue_depth+1, - SCSI_QDEPTH_RAMP_UP); - } - } - lpfc_destroy_vport_work_array(phba, vports); - atomic_set(&phba->num_rsrc_err, 0); - atomic_set(&phba->num_cmd_success, 0); -} - -/** * lpfc_scsi_dev_block - set all scsi hosts to block state * @phba: Pointer to HBA context object. * @@ -496,7 +512,16 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl; uint16_t iotag; - int bcnt; + int bcnt, bpl_size; + + bpl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp), bpl_size); for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); @@ -575,7 +600,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) iocb->un.fcpi64.bdl.addrHigh = 0; iocb->ulpBdeCount = 0; iocb->ulpLe = 0; - /* fill in responce BDE */ + /* fill in response BDE */ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = @@ -598,6 +623,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) iocb->ulpClass = CLASS3; psb->status = IOSTAT_SUCCESS; /* Put it back into the SCSI buffer list */ + psb->cur_iocbq.context1 = psb; lpfc_release_scsi_buf_s3(phba, psb); } @@ -606,6 +632,32 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc) } /** + * lpfc_sli4_vport_delete_fcp_xri_aborted -Remove all ndlp references for vport + * @vport: pointer to lpfc vport data structure. + * + * This routine is invoked by the vport cleanup for deletions and the cleanup + * for an ndlp on removal. + **/ +void +lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport) +{ + struct lpfc_hba *phba = vport->phba; + struct lpfc_scsi_buf *psb, *next_psb; + unsigned long iflag = 0; + + spin_lock_irqsave(&phba->hbalock, iflag); + spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock); + list_for_each_entry_safe(psb, next_psb, + &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) { + if (psb->rdata && psb->rdata->pnode + && psb->rdata->pnode->vport == vport) + psb->rdata = NULL; + } + spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock); + spin_unlock_irqrestore(&phba->hbalock, iflag); +} + +/** * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort * @phba: pointer to lpfc hba data structure. * @axri: pointer to the fcp xri abort wcqe structure. @@ -618,85 +670,226 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, struct sli4_wcqe_xri_aborted *axri) { uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri); + uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri); struct lpfc_scsi_buf *psb, *next_psb; unsigned long iflag = 0; + struct lpfc_iocbq *iocbq; + int i; + struct lpfc_nodelist *ndlp; + int rrq_empty = 0; + struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); + spin_lock_irqsave(&phba->hbalock, iflag); + spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock); list_for_each_entry_safe(psb, next_psb, &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) { if (psb->cur_iocbq.sli4_xritag == xri) { list_del(&psb->list); + psb->exch_busy = 0; psb->status = IOSTAT_SUCCESS; - spin_unlock_irqrestore( - &phba->sli4_hba.abts_scsi_buf_list_lock, - iflag); + spin_unlock( + &phba->sli4_hba.abts_scsi_buf_list_lock); + if (psb->rdata && psb->rdata->pnode) + ndlp = psb->rdata->pnode; + else + ndlp = NULL; + + rrq_empty = list_empty(&phba->active_rrq_list); + spin_unlock_irqrestore(&phba->hbalock, iflag); + if (ndlp) { + lpfc_set_rrq_active(phba, ndlp, + psb->cur_iocbq.sli4_lxritag, rxid, 1); + lpfc_sli4_abts_err_handler(phba, ndlp, axri); + } lpfc_release_scsi_buf_s4(phba, psb); + if (rrq_empty) + lpfc_worker_wake_up(phba); return; } } - spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, - iflag); + spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock); + for (i = 1; i <= phba->sli.last_iotag; i++) { + iocbq = phba->sli.iocbq_lookup[i]; + + if (!(iocbq->iocb_flag & LPFC_IO_FCP) || + (iocbq->iocb_flag & LPFC_IO_LIBDFC)) + continue; + if (iocbq->sli4_xritag != xri) + continue; + psb = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq); + psb->exch_busy = 0; + spin_unlock_irqrestore(&phba->hbalock, iflag); + if (!list_empty(&pring->txq)) + lpfc_worker_wake_up(phba); + return; + + } + spin_unlock_irqrestore(&phba->hbalock, iflag); } /** - * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block + * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list * @phba: pointer to lpfc hba data structure. + * @post_sblist: pointer to the scsi buffer list. * - * This routine walks the list of scsi buffers that have been allocated and - * repost them to the HBA by using SGL block post. This is needed after a - * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine - * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list - * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers. + * This routine walks a list of scsi buffers that was passed in. It attempts + * to construct blocks of scsi buffer sgls which contains contiguous xris and + * uses the non-embedded SGL block post mailbox commands to post to the port. + * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use + * embedded SGL post mailbox command for posting. The @post_sblist passed in + * must be local list, thus no lock is needed when manipulate the list. * - * Returns: 0 = success, non-zero failure. + * Returns: 0 = failure, non-zero number of successfully posted buffers. **/ int -lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) +lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, + struct list_head *post_sblist, int sb_count) { - struct lpfc_scsi_buf *psb; - int index, status, bcnt = 0, rcnt = 0, rc = 0; - LIST_HEAD(sblist); - - for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) { - psb = phba->sli4_hba.lpfc_scsi_psb_array[index]; - if (psb) { - /* Remove from SCSI buffer list */ - list_del(&psb->list); - /* Add it to a local SCSI buffer list */ - list_add_tail(&psb->list, &sblist); - if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) { - bcnt = rcnt; - rcnt = 0; + struct lpfc_scsi_buf *psb, *psb_next; + int status, sgl_size; + int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0; + dma_addr_t pdma_phys_bpl1; + int last_xritag = NO_XRI; + LIST_HEAD(prep_sblist); + LIST_HEAD(blck_sblist); + LIST_HEAD(scsi_sblist); + + /* sanity check */ + if (sb_count <= 0) + return -EINVAL; + + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + list_for_each_entry_safe(psb, psb_next, post_sblist, list) { + list_del_init(&psb->list); + block_cnt++; + if ((last_xritag != NO_XRI) && + (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) { + /* a hole in xri block, form a sgl posting block */ + list_splice_init(&prep_sblist, &blck_sblist); + post_cnt = block_cnt - 1; + /* prepare list for next posting block */ + list_add_tail(&psb->list, &prep_sblist); + block_cnt = 1; + } else { + /* prepare list for next posting block */ + list_add_tail(&psb->list, &prep_sblist); + /* enough sgls for non-embed sgl mbox command */ + if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) { + list_splice_init(&prep_sblist, &blck_sblist); + post_cnt = block_cnt; + block_cnt = 0; } - } else - /* A hole present in the XRI array, need to skip */ - bcnt = rcnt; + } + num_posting++; + last_xritag = psb->cur_iocbq.sli4_xritag; - if (index == phba->sli4_hba.scsi_xri_cnt - 1) - /* End of XRI array for SCSI buffer, complete */ - bcnt = rcnt; + /* end of repost sgl list condition for SCSI buffers */ + if (num_posting == sb_count) { + if (post_cnt == 0) { + /* last sgl posting block */ + list_splice_init(&prep_sblist, &blck_sblist); + post_cnt = block_cnt; + } else if (block_cnt == 1) { + /* last single sgl with non-contiguous xri */ + if (sgl_size > SGL_PAGE_SIZE) + pdma_phys_bpl1 = psb->dma_phys_bpl + + SGL_PAGE_SIZE; + else + pdma_phys_bpl1 = 0; + status = lpfc_sli4_post_sgl(phba, + psb->dma_phys_bpl, + pdma_phys_bpl1, + psb->cur_iocbq.sli4_xritag); + if (status) { + /* failure, put on abort scsi list */ + psb->exch_busy = 1; + } else { + /* success, put on SCSI buffer list */ + psb->exch_busy = 0; + psb->status = IOSTAT_SUCCESS; + num_posted++; + } + /* success, put on SCSI buffer sgl list */ + list_add_tail(&psb->list, &scsi_sblist); + } + } - /* Continue until collect up to a nembed page worth of sgls */ - if (bcnt == 0) + /* continue until a nembed page worth of sgls */ + if (post_cnt == 0) continue; - /* Now, post the SCSI buffer list sgls as a block */ - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); - /* Reset SCSI buffer count for next round of posting */ - bcnt = 0; - while (!list_empty(&sblist)) { - list_remove_head(&sblist, psb, struct lpfc_scsi_buf, - list); + + /* post block of SCSI buffer list sgls */ + status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist, + post_cnt); + + /* don't reset xirtag due to hole in xri block */ + if (block_cnt == 0) + last_xritag = NO_XRI; + + /* reset SCSI buffer post count for next round of posting */ + post_cnt = 0; + + /* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */ + while (!list_empty(&blck_sblist)) { + list_remove_head(&blck_sblist, psb, + struct lpfc_scsi_buf, list); if (status) { - /* Put this back on the abort scsi list */ - psb->status = IOSTAT_LOCAL_REJECT; - psb->result = IOERR_ABORT_REQUESTED; - rc++; - } else + /* failure, put on abort scsi list */ + psb->exch_busy = 1; + } else { + /* success, put on SCSI buffer list */ + psb->exch_busy = 0; psb->status = IOSTAT_SUCCESS; - /* Put it back into the SCSI buffer list */ - lpfc_release_scsi_buf_s4(phba, psb); + num_posted++; + } + list_add_tail(&psb->list, &scsi_sblist); } } + /* Push SCSI buffers with sgl posted to the availble list */ + while (!list_empty(&scsi_sblist)) { + list_remove_head(&scsi_sblist, psb, + struct lpfc_scsi_buf, list); + lpfc_release_scsi_buf_s4(phba, psb); + } + return num_posted; +} + +/** + * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls + * @phba: pointer to lpfc hba data structure. + * + * This routine walks the list of scsi buffers that have been allocated and + * repost them to the port by using SGL block post. This is needed after a + * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine + * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list + * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers. + * + * Returns: 0 = success, non-zero failure. + **/ +int +lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) +{ + LIST_HEAD(post_sblist); + int num_posted, rc = 0; + + /* get all SCSI buffers need to repost to a local list */ + spin_lock_irq(&phba->scsi_buf_list_get_lock); + spin_lock(&phba->scsi_buf_list_put_lock); + list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist); + list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist); + spin_unlock(&phba->scsi_buf_list_put_lock); + spin_unlock_irq(&phba->scsi_buf_list_get_lock); + + /* post the list of scsi buffer sgls to port if available */ + if (!list_empty(&post_sblist)) { + num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist, + phba->sli4_hba.scsi_xri_cnt); + /* failed to post any scsi buffer, return error */ + if (num_posted == 0) + rc = -EIO; + } return rc; } @@ -705,12 +898,13 @@ lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) * @vport: The virtual port for which this call being executed. * @num_to_allocate: The requested number of buffers to allocate. * - * This routine allocates a scsi buffer for device with SLI-4 interface spec, + * This routine allocates scsi buffers for device with SLI-4 interface spec, * the scsi buffer contains all the necessary information needed to initiate - * a SCSI I/O. + * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put + * them on a list, it post them to the port by using SGL block post. * * Return codes: - * int - number of scsi buffers that were allocated. + * int - number of scsi buffers that were allocated and posted. * 0 = failure, less than num_to_alloc is a partial failure. **/ static int @@ -722,24 +916,31 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) IOCB_t *iocb; dma_addr_t pdma_phys_fcp_cmd; dma_addr_t pdma_phys_fcp_rsp; - dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; - uint16_t iotag, last_xritag = NO_XRI; - int status = 0, index; - int bcnt; - int non_sequential_xri = 0; - int rc = 0; - LIST_HEAD(sblist); + dma_addr_t pdma_phys_bpl; + uint16_t iotag, lxri = 0; + int bcnt, num_posted, sgl_size; + LIST_HEAD(prep_sblist); + LIST_HEAD(post_sblist); + LIST_HEAD(scsi_sblist); + + sgl_size = phba->cfg_sg_dma_buf_size - + (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n", + num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size, + (int)sizeof(struct fcp_cmnd), + (int)sizeof(struct fcp_rsp)); for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL); if (!psb) break; - /* - * Get memory from the pci pool to map the virt space to pci bus - * space for an I/O. The DMA buffer includes space for the - * struct fcp_cmnd, struct fcp_rsp and the number of bde's - * necessary to support the sg_tablesize. + * Get memory from the pci pool to map the virt space to + * pci bus space for an I/O. The DMA buffer includes space + * for the struct fcp_cmnd, struct fcp_rsp and the number + * of bde's necessary to support the sg_tablesize. */ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL, &psb->dma_handle); @@ -747,68 +948,75 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) kfree(psb); break; } - - /* Initialize virtual ptrs to dma_buf region. */ memset(psb->data, 0, phba->cfg_sg_dma_buf_size); - /* Allocate iotag for psb->cur_iocbq. */ - iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); - if (iotag == 0) { + /* + * 4K Page alignment is CRITICAL to BlockGuard, double check + * to be sure. + */ + if (phba->cfg_enable_bg && (((unsigned long)(psb->data) & + (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); kfree(psb); break; } - psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba); - if (psb->cur_iocbq.sli4_xritag == NO_XRI) { + + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data, psb->dma_handle); kfree(psb); break; } - if (last_xritag != NO_XRI - && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) { - non_sequential_xri = 1; - } else - list_add_tail(&psb->list, &sblist); - last_xritag = psb->cur_iocbq.sli4_xritag; - index = phba->sli4_hba.scsi_xri_cnt++; + /* Allocate iotag for psb->cur_iocbq. */ + iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq); + if (iotag == 0) { + pci_pool_free(phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); + kfree(psb); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "3368 Failed to allocated IOTAG for" + " XRI:0x%x\n", lxri); + lpfc_sli4_free_xri(phba, lxri); + break; + } + psb->cur_iocbq.sli4_lxritag = lxri; + psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP; - psb->fcp_bpl = psb->data; - psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + psb->fcp_cmnd = (psb->data + sgl_size); psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd + sizeof(struct fcp_cmnd)); /* Initialize local short-hand pointers. */ sgl = (struct sli4_sge *)psb->fcp_bpl; pdma_phys_bpl = psb->dma_handle; - pdma_phys_fcp_cmd = - (psb->dma_handle + phba->cfg_sg_dma_buf_size) - - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); + pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size); pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd); /* - * The first two bdes are the FCP_CMD and FCP_RSP. The balance - * are sg list bdes. Initialize the first two and leave the - * rest for queuecommand. + * The first two bdes are the FCP_CMD and FCP_RSP. + * The balance are sg list bdes. Initialize the + * first two and leave the rest for queuecommand. */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd)); - bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 0); sgl->word2 = cpu_to_le32(sgl->word2); - sgl->word3 = cpu_to_le32(sgl->word3); + sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd)); sgl++; /* Setup the physical region for the FCP RSP */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp)); - bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 1); sgl->word2 = cpu_to_le32(sgl->word2); - sgl->word3 = cpu_to_le32(sgl->word3); + sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp)); /* * Since the IOCB for the FCP I/O is built into this @@ -827,47 +1035,27 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) iocb->ulpBdeCount = 1; iocb->ulpLe = 1; iocb->ulpClass = CLASS3; - if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) - pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE; - else - pdma_phys_bpl1 = 0; + psb->cur_iocbq.context1 = psb; psb->dma_phys_bpl = pdma_phys_bpl; - phba->sli4_hba.lpfc_scsi_psb_array[index] = psb; - if (non_sequential_xri) { - status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl, - pdma_phys_bpl1, - psb->cur_iocbq.sli4_xritag); - if (status) { - /* Put this back on the abort scsi list */ - psb->status = IOSTAT_LOCAL_REJECT; - psb->result = IOERR_ABORT_REQUESTED; - rc++; - } else - psb->status = IOSTAT_SUCCESS; - /* Put it back into the SCSI buffer list */ - lpfc_release_scsi_buf_s4(phba, psb); - break; - } - } - if (bcnt) { - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); - /* Reset SCSI buffer count for next round of posting */ - while (!list_empty(&sblist)) { - list_remove_head(&sblist, psb, struct lpfc_scsi_buf, - list); - if (status) { - /* Put this back on the abort scsi list */ - psb->status = IOSTAT_LOCAL_REJECT; - psb->result = IOERR_ABORT_REQUESTED; - rc++; - } else - psb->status = IOSTAT_SUCCESS; - /* Put it back into the SCSI buffer list */ - lpfc_release_scsi_buf_s4(phba, psb); - } + + /* add the scsi buffer to a post list */ + list_add_tail(&psb->list, &post_sblist); + spin_lock_irq(&phba->scsi_buf_list_get_lock); + phba->sli4_hba.scsi_xri_cnt++; + spin_unlock_irq(&phba->scsi_buf_list_get_lock); } + lpfc_printf_log(phba, KERN_INFO, LOG_BG, + "3021 Allocate %d out of %d requested new SCSI " + "buffers\n", bcnt, num_to_alloc); + + /* post the list of scsi buffer sgls to port if available */ + if (!list_empty(&post_sblist)) + num_posted = lpfc_sli4_post_scsi_sgl_list(phba, + &post_sblist, bcnt); + else + num_posted = 0; - return bcnt + non_sequential_xri - rc; + return num_posted; } /** @@ -889,7 +1077,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc) } /** - * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA + * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA * @phba: The HBA for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list @@ -900,22 +1088,92 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc) * Pointer to lpfc_scsi_buf - Success **/ static struct lpfc_scsi_buf* -lpfc_get_scsi_buf(struct lpfc_hba * phba) +lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) { struct lpfc_scsi_buf * lpfc_cmd = NULL; - struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list; + struct list_head *scsi_buf_list_get = &phba->lpfc_scsi_buf_list_get; unsigned long iflag = 0; - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); - list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list); - if (lpfc_cmd) { - lpfc_cmd->seg_cnt = 0; - lpfc_cmd->nonsg_phys = 0; - lpfc_cmd->prot_seg_cnt = 0; + spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag); + list_remove_head(scsi_buf_list_get, lpfc_cmd, struct lpfc_scsi_buf, + list); + if (!lpfc_cmd) { + spin_lock(&phba->scsi_buf_list_put_lock); + list_splice(&phba->lpfc_scsi_buf_list_put, + &phba->lpfc_scsi_buf_list_get); + INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put); + list_remove_head(scsi_buf_list_get, lpfc_cmd, + struct lpfc_scsi_buf, list); + spin_unlock(&phba->scsi_buf_list_put_lock); } - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag); return lpfc_cmd; } +/** + * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA + * @phba: The HBA for which this call is being executed. + * + * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list + * and returns to caller. + * + * Return codes: + * NULL - Error + * Pointer to lpfc_scsi_buf - Success + **/ +static struct lpfc_scsi_buf* +lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) +{ + struct lpfc_scsi_buf *lpfc_cmd, *lpfc_cmd_next; + unsigned long iflag = 0; + int found = 0; + + spin_lock_irqsave(&phba->scsi_buf_list_get_lock, iflag); + list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next, + &phba->lpfc_scsi_buf_list_get, list) { + if (lpfc_test_rrq_active(phba, ndlp, + lpfc_cmd->cur_iocbq.sli4_lxritag)) + continue; + list_del(&lpfc_cmd->list); + found = 1; + break; + } + if (!found) { + spin_lock(&phba->scsi_buf_list_put_lock); + list_splice(&phba->lpfc_scsi_buf_list_put, + &phba->lpfc_scsi_buf_list_get); + INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put); + spin_unlock(&phba->scsi_buf_list_put_lock); + list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next, + &phba->lpfc_scsi_buf_list_get, list) { + if (lpfc_test_rrq_active( + phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag)) + continue; + list_del(&lpfc_cmd->list); + found = 1; + break; + } + } + spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, iflag); + if (!found) + return NULL; + return lpfc_cmd; +} +/** + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA + * @phba: The HBA for which this call is being executed. + * + * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list + * and returns to caller. + * + * Return codes: + * NULL - Error + * Pointer to lpfc_scsi_buf - Success + **/ +static struct lpfc_scsi_buf* +lpfc_get_scsi_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) +{ + return phba->lpfc_get_scsi_buf(phba, ndlp); +} /** * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list @@ -930,10 +1188,15 @@ lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { unsigned long iflag = 0; - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); + psb->seg_cnt = 0; + psb->nonsg_phys = 0; + psb->prot_seg_cnt = 0; + + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag); psb->pCmd = NULL; - list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + psb->cur_iocbq.iocb_flag = LPFC_IO_FCP; + list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag); } /** @@ -951,8 +1214,11 @@ lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) { unsigned long iflag = 0; - if (psb->status == IOSTAT_LOCAL_REJECT - && psb->result == IOERR_ABORT_REQUESTED) { + psb->seg_cnt = 0; + psb->nonsg_phys = 0; + psb->prot_seg_cnt = 0; + + if (psb->exch_busy) { spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); psb->pCmd = NULL; @@ -961,11 +1227,11 @@ lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag); } else { - - spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); psb->pCmd = NULL; - list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); + psb->cur_iocbq.iocb_flag = LPFC_IO_FCP; + spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag); + list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put); + spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag); } } @@ -1005,6 +1271,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) struct scatterlist *sgel = NULL; struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl; + struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq; IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde; dma_addr_t physaddr; @@ -1038,6 +1305,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -1055,6 +1323,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) physaddr = sg_dma_address(sgel); if (phba->sli_rev == 3 && !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) && + !(iocbq->iocb_flag & DSS_SECURITY_OP) && nseg <= LPFC_EXT_DATA_BDE_COUNT) { data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; data_bde->tus.f.bdeSize = sg_dma_len(sgel); @@ -1081,7 +1350,8 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * explicitly reinitialized since all iocb memory resources are reused. */ if (phba->sli_rev == 3 && - !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) { + !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) && + !(iocbq->iocb_flag & DSS_SECURITY_OP)) { if (num_bde > LPFC_EXT_DATA_BDE_COUNT) { /* * The extended IOCB format can only fit 3 BDE or a BPL. @@ -1097,15 +1367,16 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) (2 * sizeof(struct ulp_bde64))); data_bde->addrHigh = putPaddrHigh(physaddr); data_bde->addrLow = putPaddrLow(physaddr); - /* ebde count includes the responce bde and data bpl */ + /* ebde count includes the response bde and data bpl */ iocb_cmd->unsli3.fcp_ext.ebde_count = 2; } else { - /* ebde count includes the responce bde and data bdes */ + /* ebde count includes the response bde and data bdes */ iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); } } else { iocb_cmd->un.fcpi64.bdl.bdeSize = ((num_bde + 2) * sizeof(struct ulp_bde64)); + iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1); } fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); @@ -1117,123 +1388,583 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) return 0; } -/* - * Given a scsi cmnd, determine the BlockGuard profile to be used - * with the cmd - */ +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + +/* Return if if error injection is detected by Initiator */ +#define BG_ERR_INIT 0x1 +/* Return if if error injection is detected by Target */ +#define BG_ERR_TGT 0x2 +/* Return if if swapping CSUM<-->CRC is required for error injection */ +#define BG_ERR_SWAP 0x10 +/* Return if disabling Guard/Ref/App checking is required for error injection */ +#define BG_ERR_CHECK 0x20 + +/** + * lpfc_bg_err_inject - Determine if we should inject an error + * @phba: The Hba for which this call is being executed. + * @sc: The SCSI command to examine + * @reftag: (out) BlockGuard reference tag for transmitted data + * @apptag: (out) BlockGuard application tag for transmitted data + * @new_guard (in) Value to replace CRC with if needed + * + * Returns BG_ERR_* bit mask or 0 if request ignored + **/ static int -lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc) +lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, + uint32_t *reftag, uint16_t *apptag, uint32_t new_guard) { - uint8_t guard_type = scsi_host_get_guard(sc->device->host); - uint8_t ret_prof = LPFC_PROF_INVALID; + struct scatterlist *sgpe; /* s/g prot entry */ + struct scatterlist *sgde; /* s/g data entry */ + struct lpfc_scsi_buf *lpfc_cmd = NULL; + struct scsi_dif_tuple *src = NULL; + struct lpfc_nodelist *ndlp; + struct lpfc_rport_data *rdata; + uint32_t op = scsi_get_prot_op(sc); + uint32_t blksize; + uint32_t numblks; + sector_t lba; + int rc = 0; + int blockoff = 0; + + if (op == SCSI_PROT_NORMAL) + return 0; + + sgpe = scsi_prot_sglist(sc); + sgde = scsi_sglist(sc); + lba = scsi_get_lba(sc); + + /* First check if we need to match the LBA */ + if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) { + blksize = lpfc_cmd_blksize(sc); + numblks = (scsi_bufflen(sc) + blksize - 1) / blksize; + + /* Make sure we have the right LBA if one is specified */ + if ((phba->lpfc_injerr_lba < lba) || + (phba->lpfc_injerr_lba >= (lba + numblks))) + return 0; + if (sgpe) { + blockoff = phba->lpfc_injerr_lba - lba; + numblks = sg_dma_len(sgpe) / + sizeof(struct scsi_dif_tuple); + if (numblks < blockoff) + blockoff = numblks; + } + } + + /* Next check if we need to match the remote NPortID or WWPN */ + rdata = lpfc_rport_data_from_scsi_device(sc->device); + if (rdata && rdata->pnode) { + ndlp = rdata->pnode; + + /* Make sure we have the right NPortID if one is specified */ + if (phba->lpfc_injerr_nportid && + (phba->lpfc_injerr_nportid != ndlp->nlp_DID)) + return 0; - if (guard_type == SHOST_DIX_GUARD_IP) { + /* + * Make sure we have the right WWPN if one is specified. + * wwn[0] should be a non-zero NAA in a good WWPN. + */ + if (phba->lpfc_injerr_wwpn.u.wwn[0] && + (memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn, + sizeof(struct lpfc_name)) != 0)) + return 0; + } + + /* Setup a ptr to the protection data if the SCSI host provides it */ + if (sgpe) { + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + src += blockoff; + lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble; + } + + /* Should we change the Reference Tag */ + if (reftag) { + if (phba->lpfc_injerr_wref_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9076 BLKGRD: Injecting reftag error: " + "write lba x%lx + x%x oldrefTag x%x\n", + (unsigned long)lba, blockoff, + be32_to_cpu(src->ref_tag)); + + /* + * Save the old ref_tag so we can + * restore it on completion. + */ + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_REFTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->ref_tag; + } + src->ref_tag = cpu_to_be32(0xDEADBEEF); + phba->lpfc_injerr_wref_cnt--; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + + break; + } + /* Drop thru */ + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the error + * to be sent on the wire. It should be + * detected by the Target. + */ + /* DEADBEEF will be the reftag on the wire */ + *reftag = 0xDEADBEEF; + phba->lpfc_injerr_wref_cnt--; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9078 BLKGRD: Injecting reftag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + *reftag = 0xDEADBEEF; + phba->lpfc_injerr_wref_cnt--; + if (phba->lpfc_injerr_wref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9077 BLKGRD: Injecting reftag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + } + } + if (phba->lpfc_injerr_rref_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ + *reftag = 0xDEADBEEF; + phba->lpfc_injerr_rref_cnt--; + if (phba->lpfc_injerr_rref_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9079 BLKGRD: Injecting reftag error: " + "read lba x%lx\n", (unsigned long)lba); + break; + } + } + } + + /* Should we change the Application Tag */ + if (apptag) { + if (phba->lpfc_injerr_wapp_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + if (src) { + /* + * For WRITE_PASS, force the error + * to be sent on the wire. It should + * be detected by the Target. + * If blockoff != 0 error will be + * inserted in middle of the IO. + */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9080 BLKGRD: Injecting apptag error: " + "write lba x%lx + x%x oldappTag x%x\n", + (unsigned long)lba, blockoff, + be16_to_cpu(src->app_tag)); + + /* + * Save the old app_tag so we can + * restore it on completion. + */ + if (lpfc_cmd) { + lpfc_cmd->prot_data_type = + LPFC_INJERR_APPTAG; + lpfc_cmd->prot_data_segment = + src; + lpfc_cmd->prot_data = + src->app_tag; + } + src->app_tag = cpu_to_be16(0xDEAD); + phba->lpfc_injerr_wapp_cnt--; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + break; + } + /* Drop thru */ + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. + */ + /* DEAD will be the apptag on the wire */ + *apptag = 0xDEAD; + phba->lpfc_injerr_wapp_cnt--; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_TGT | BG_ERR_CHECK; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0813 BLKGRD: Injecting apptag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + *apptag = 0xDEAD; + phba->lpfc_injerr_wapp_cnt--; + if (phba->lpfc_injerr_wapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0812 BLKGRD: Injecting apptag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + } + } + if (phba->lpfc_injerr_rapp_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ + *apptag = 0xDEAD; + phba->lpfc_injerr_rapp_cnt--; + if (phba->lpfc_injerr_rapp_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + rc = BG_ERR_INIT; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0814 BLKGRD: Injecting apptag error: " + "read lba x%lx\n", (unsigned long)lba); + break; + } + } + } + + + /* Should we change the Guard Tag */ + if (new_guard) { + if (phba->lpfc_injerr_wgrd_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + rc = BG_ERR_CHECK; + /* Drop thru */ + + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. + */ + phba->lpfc_injerr_wgrd_cnt--; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + + rc |= BG_ERR_TGT | BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0817 BLKGRD: Injecting guard error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + phba->lpfc_injerr_wgrd_cnt--; + if (phba->lpfc_injerr_wgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + + rc = BG_ERR_INIT | BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0816 BLKGRD: Injecting guard error: " + "write lba x%lx\n", (unsigned long)lba); + break; + } + } + if (phba->lpfc_injerr_rgrd_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ + phba->lpfc_injerr_rgrd_cnt--; + if (phba->lpfc_injerr_rgrd_cnt == 0) { + phba->lpfc_injerr_nportid = 0; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + memset(&phba->lpfc_injerr_wwpn, + 0, sizeof(struct lpfc_name)); + } + + rc = BG_ERR_INIT | BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0818 BLKGRD: Injecting guard error: " + "read lba x%lx\n", (unsigned long)lba); + } + } + } + + return rc; +} +#endif + +/** + * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with + * the specified SCSI command. + * @phba: The Hba for which this call is being executed. + * @sc: The SCSI command to examine + * @txopt: (out) BlockGuard operation for transmitted data + * @rxopt: (out) BlockGuard operation for received data + * + * Returns: zero on success; non-zero if tx and/or rx op cannot be determined + * + **/ +static int +lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, + uint8_t *txop, uint8_t *rxop) +{ + uint8_t ret = 0; + + if (lpfc_cmd_guard_csum(sc)) { switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - ret_prof = LPFC_PROF_AST2; + *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - ret_prof = LPFC_PROF_A1; + *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - ret_prof = LPFC_PROF_AST1; + *rxop = BG_OP_IN_CRC_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CRC; break; case SCSI_PROT_NORMAL: default: lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9063 BLKGRD:Bad op/guard:%d/%d combination\n", - scsi_get_prot_op(sc), guard_type); + "9063 BLKGRD: Bad op/guard:%d/IP combination\n", + scsi_get_prot_op(sc)); + ret = 1; break; } - } else if (guard_type == SHOST_DIX_GUARD_CRC) { + } else { switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - ret_prof = LPFC_PROF_A1; + *rxop = BG_OP_IN_CRC_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CRC; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - ret_prof = LPFC_PROF_C1; + *rxop = BG_OP_IN_CRC_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CRC; break; case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: + *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; + break; + case SCSI_PROT_NORMAL: default: lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9075 BLKGRD: Bad op/guard:%d/%d combination\n", - scsi_get_prot_op(sc), guard_type); + "9075 BLKGRD: Bad op/guard:%d/CRC combination\n", + scsi_get_prot_op(sc)); + ret = 1; break; } - } else { - /* unsupported format */ - BUG(); } - return ret_prof; -} - -struct scsi_dif_tuple { - __be16 guard_tag; /* Checksum */ - __be16 app_tag; /* Opaque storage */ - __be32 ref_tag; /* Target LBA or indirect LBA */ -}; - -static inline unsigned -lpfc_cmd_blksize(struct scsi_cmnd *sc) -{ - return sc->device->sector_size; + return ret; } +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS /** - * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command - * @sc: in: SCSI command - * @apptagmask: out: app tag mask - * @apptagval: out: app tag value - * @reftag: out: ref tag (reference tag) + * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with + * the specified SCSI command in order to force a guard tag error. + * @phba: The Hba for which this call is being executed. + * @sc: The SCSI command to examine + * @txopt: (out) BlockGuard operation for transmitted data + * @rxopt: (out) BlockGuard operation for received data * - * Description: - * Extract DIF parameters from the command if possible. Otherwise, - * use default parameters. + * Returns: zero on success; non-zero if tx and/or rx op cannot be determined * **/ -static inline void -lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask, - uint16_t *apptagval, uint32_t *reftag) +static int +lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, + uint8_t *txop, uint8_t *rxop) { - struct scsi_dif_tuple *spt; - unsigned char op = scsi_get_prot_op(sc); - unsigned int protcnt = scsi_prot_sg_count(sc); - static int cnt; + uint8_t ret = 0; - if (protcnt && (op == SCSI_PROT_WRITE_STRIP || - op == SCSI_PROT_WRITE_PASS)) { + if (lpfc_cmd_guard_csum(sc)) { + switch (scsi_get_prot_op(sc)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + *rxop = BG_OP_IN_NODIF_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_NODIF; + break; - cnt++; - spt = page_address(sg_page(scsi_prot_sglist(sc))) + - scsi_prot_sglist(sc)[0].offset; - *apptagmask = 0; - *apptagval = 0; - *reftag = cpu_to_be32(spt->ref_tag); + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; + break; + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + *rxop = BG_OP_IN_CSUM_OUT_CRC; + *txop = BG_OP_IN_CRC_OUT_CSUM; + break; + + case SCSI_PROT_NORMAL: + default: + break; + + } } else { - /* SBC defines ref tag to be lower 32bits of LBA */ - *reftag = (uint32_t) (0xffffffff & scsi_get_lba(sc)); - *apptagmask = 0; - *apptagval = 0; + switch (scsi_get_prot_op(sc)) { + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + *rxop = BG_OP_IN_CSUM_OUT_NODIF; + *txop = BG_OP_IN_NODIF_OUT_CSUM; + break; + + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + *rxop = BG_OP_IN_CSUM_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_CSUM; + break; + + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + *rxop = BG_OP_IN_NODIF_OUT_CSUM; + *txop = BG_OP_IN_CSUM_OUT_NODIF; + break; + + case SCSI_PROT_NORMAL: + default: + break; + } } + + return ret; } +#endif -/* - * This function sets up buffer list for protection groups of +/** + * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @bpl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * + * This function sets up BPL buffer list for protection groups of * type LPFC_PG_TYPE_NO_DIF * * This is usually used when the HBA is instructed to generate @@ -1243,48 +1974,101 @@ lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask, * The buffer list consists of just one protection group described * below: * +-------------------------+ - * start of prot group --> | PDE_1 | + * start of prot group --> | PDE_5 | + * +-------------------------+ + * | PDE_6 | * +-------------------------+ * | Data BDE | * +-------------------------+ * |more Data BDE's ... (opt)| * +-------------------------+ * - * @sc: pointer to scsi command we're working on - * @bpl: pointer to buffer list for protection groups - * @datacnt: number of segments of data that have been dma mapped * * Note: Data s/g buffers have been dma mapped - */ + * + * Returns the number of BDEs added to the BPL. + **/ static int lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct ulp_bde64 *bpl, int datasegcnt) { struct scatterlist *sgde = NULL; /* s/g data entry */ - struct lpfc_pde *pde1 = NULL; + struct lpfc_pde5 *pde5 = NULL; + struct lpfc_pde6 *pde6 = NULL; dma_addr_t physaddr; - int i = 0, num_bde = 0; + int i = 0, num_bde = 0, status; int datadir = sc->sc_data_direction; - int prof = LPFC_PROF_INVALID; - unsigned blksize; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t rc; +#endif + uint32_t checking = 1; uint32_t reftag; - uint16_t apptagmask, apptagval; - - pde1 = (struct lpfc_pde *) bpl; - prof = lpfc_sc_to_sli_prof(phba, sc); + unsigned blksize; + uint8_t txop, rxop; - if (prof == LPFC_PROF_INVALID) + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) goto out; - /* extract some info from the scsi command for PDE1*/ + /* extract some info from the scsi command for pde*/ blksize = lpfc_cmd_blksize(sc); - lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); + if (rc) { + if (rc & BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc & BG_ERR_CHECK) + checking = 0; + } +#endif + + /* setup PDE5 with what we have */ + pde5 = (struct lpfc_pde5 *) bpl; + memset(pde5, 0, sizeof(struct lpfc_pde5)); + bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); + + /* Endianness conversion if necessary for PDE5 */ + pde5->word0 = cpu_to_le32(pde5->word0); + pde5->reftag = cpu_to_le32(reftag); + + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + pde6 = (struct lpfc_pde6 *) bpl; + + /* setup PDE6 with the rest of the info */ + memset(pde6, 0, sizeof(struct lpfc_pde6)); + bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); + bf_set(pde6_optx, pde6, txop); + bf_set(pde6_oprx, pde6, rxop); + + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ + if (datadir == DMA_FROM_DEVICE) { + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); + } + bf_set(pde6_ai, pde6, 1); + bf_set(pde6_ae, pde6, 0); + bf_set(pde6_apptagval, pde6, 0); - /* setup PDE1 with what we have */ - lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, - BG_EC_STOP_ERR); - lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); + /* Endianness conversion if necessary for PDE6 */ + pde6->word0 = cpu_to_le32(pde6->word0); + pde6->word1 = cpu_to_le32(pde6->word1); + pde6->word2 = cpu_to_le32(pde6->word2); + /* advance bpl and increment bde count */ num_bde++; bpl++; @@ -1307,9 +2091,16 @@ out: return num_bde; } -/* - * This function sets up buffer list for protection groups of - * type LPFC_PG_TYPE_DIF_BUF +/** + * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @bpl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * @protcnt: number of segment of protection data that have been dma mapped + * + * This function sets up BPL buffer list for protection groups of + * type LPFC_PG_TYPE_DIF * * This is usually used when DIFs are in their own buffers, * separate from the data. The HBA can then by instructed @@ -1319,46 +2110,51 @@ out: * The buffer list for this type consists of one or more of the * protection groups described below: * +-------------------------+ - * start of first prot group --> | PDE_1 | + * start of first prot group --> | PDE_5 | + * +-------------------------+ + * | PDE_6 | * +-------------------------+ - * | PDE_3 (Prot BDE) | + * | PDE_7 (Prot BDE) | * +-------------------------+ * | Data BDE | * +-------------------------+ * |more Data BDE's ... (opt)| * +-------------------------+ - * start of new prot group --> | PDE_1 | + * start of new prot group --> | PDE_5 | * +-------------------------+ * | ... | * +-------------------------+ * - * @sc: pointer to scsi command we're working on - * @bpl: pointer to buffer list for protection groups - * @datacnt: number of segments of data that have been dma mapped - * @protcnt: number of segment of protection data that have been dma mapped - * * Note: It is assumed that both data and protection s/g buffers have been * mapped for DMA - */ + * + * Returns the number of BDEs added to the BPL. + **/ static int lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct ulp_bde64 *bpl, int datacnt, int protcnt) { struct scatterlist *sgde = NULL; /* s/g data entry */ struct scatterlist *sgpe = NULL; /* s/g prot entry */ - struct lpfc_pde *pde1 = NULL; - struct ulp_bde64 *prot_bde = NULL; + struct lpfc_pde5 *pde5 = NULL; + struct lpfc_pde6 *pde6 = NULL; + struct lpfc_pde7 *pde7 = NULL; dma_addr_t dataphysaddr, protphysaddr; unsigned short curr_data = 0, curr_prot = 0; - unsigned int split_offset, protgroup_len; + unsigned int split_offset; + unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder; unsigned int protgrp_blks, protgrp_bytes; unsigned int remainder, subtotal; - int prof = LPFC_PROF_INVALID; + int status; int datadir = sc->sc_data_direction; unsigned char pgdone = 0, alldone = 0; unsigned blksize; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t rc; +#endif + uint32_t checking = 1; uint32_t reftag; - uint16_t apptagmask, apptagval; + uint8_t txop, rxop; int num_bde = 0; sgpe = scsi_prot_sglist(sc); @@ -1371,54 +2167,111 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, return 0; } - prof = lpfc_sc_to_sli_prof(phba, sc); - if (prof == LPFC_PROF_INVALID) + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) goto out; - /* extract some info from the scsi command for PDE1*/ + /* extract some info from the scsi command */ blksize = lpfc_cmd_blksize(sc); - lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); + if (rc) { + if (rc & BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc & BG_ERR_CHECK) + checking = 0; + } +#endif split_offset = 0; do { - /* setup the first PDE_1 */ - pde1 = (struct lpfc_pde *) bpl; + /* Check to see if we ran out of space */ + if (num_bde >= (phba->cfg_total_seg_cnt - 2)) + return num_bde + 3; - lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, - BG_EC_STOP_ERR); - lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); + /* setup PDE5 with what we have */ + pde5 = (struct lpfc_pde5 *) bpl; + memset(pde5, 0, sizeof(struct lpfc_pde5)); + bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); + /* Endianness conversion if necessary for PDE5 */ + pde5->word0 = cpu_to_le32(pde5->word0); + pde5->reftag = cpu_to_le32(reftag); + + /* advance bpl and increment bde count */ num_bde++; bpl++; + pde6 = (struct lpfc_pde6 *) bpl; - /* setup the first BDE that points to protection buffer */ - prot_bde = (struct ulp_bde64 *) bpl; - protphysaddr = sg_dma_address(sgpe); - prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); - prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); - protgroup_len = sg_dma_len(sgpe); + /* setup PDE6 with the rest of the info */ + memset(pde6, 0, sizeof(struct lpfc_pde6)); + bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); + bf_set(pde6_optx, pde6, txop); + bf_set(pde6_oprx, pde6, rxop); + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) + bf_set(pde6_ce, pde6, checking); + else + bf_set(pde6_ce, pde6, 0); + + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF)) + bf_set(pde6_re, pde6, checking); + else + bf_set(pde6_re, pde6, 0); + + bf_set(pde6_ai, pde6, 1); + bf_set(pde6_ae, pde6, 0); + bf_set(pde6_apptagval, pde6, 0); + + /* Endianness conversion if necessary for PDE6 */ + pde6->word0 = cpu_to_le32(pde6->word0); + pde6->word1 = cpu_to_le32(pde6->word1); + pde6->word2 = cpu_to_le32(pde6->word2); + + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + + /* setup the first BDE that points to protection buffer */ + protphysaddr = sg_dma_address(sgpe) + protgroup_offset; + protgroup_len = sg_dma_len(sgpe) - protgroup_offset; /* must be integer multiple of the DIF block length */ BUG_ON(protgroup_len % 8); + pde7 = (struct lpfc_pde7 *) bpl; + memset(pde7, 0, sizeof(struct lpfc_pde7)); + bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR); + + pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); + pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); + protgrp_blks = protgroup_len / 8; protgrp_bytes = protgrp_blks * blksize; - prot_bde->tus.f.bdeSize = protgroup_len; - if (datadir == DMA_TO_DEVICE) - prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; - else - prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; - prot_bde->tus.w = le32_to_cpu(bpl->tus.w); + /* check if this pde is crossing the 4K boundary; if so split */ + if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) { + protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff); + protgroup_offset += protgroup_remainder; + protgrp_blks = protgroup_remainder / 8; + protgrp_bytes = protgrp_blks * blksize; + } else { + protgroup_offset = 0; + curr_prot++; + } - curr_prot++; num_bde++; /* setup BDE's for data blocks associated with DIF data */ pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_bde >= phba->cfg_total_seg_cnt) + return num_bde + 1; + if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9065 BLKGRD:%s Invalid data segment\n", @@ -1461,6 +2314,14 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* Move to the next s/g segment if possible */ sgde = sg_next(sgde); + + } + + if (protgroup_offset) { + /* update the reference tag */ + reftag += protgrp_blks; + bpl++; + continue; } /* are we done ? */ @@ -1480,19 +2341,410 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, } } while (!alldone); +out: + + return num_bde; +} + +/** + * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @sgl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * + * This function sets up SGL buffer list for protection groups of + * type LPFC_PG_TYPE_NO_DIF + * + * This is usually used when the HBA is instructed to generate + * DIFs and insert them into data stream (or strip DIF from + * incoming data stream) + * + * The buffer list consists of just one protection group described + * below: + * +-------------------------+ + * start of prot group --> | DI_SEED | + * +-------------------------+ + * | Data SGE | + * +-------------------------+ + * |more Data SGE's ... (opt)| + * +-------------------------+ + * + * + * Note: Data s/g buffers have been dma mapped + * + * Returns the number of SGEs added to the SGL. + **/ +static int +lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, + struct sli4_sge *sgl, int datasegcnt) +{ + struct scatterlist *sgde = NULL; /* s/g data entry */ + struct sli4_sge_diseed *diseed = NULL; + dma_addr_t physaddr; + int i = 0, num_sge = 0, status; + uint32_t reftag; + unsigned blksize; + uint8_t txop, rxop; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t rc; +#endif + uint32_t checking = 1; + uint32_t dma_len; + uint32_t dma_offset = 0; + + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) + goto out; + + /* extract some info from the scsi command for pde*/ + blksize = lpfc_cmd_blksize(sc); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); + if (rc) { + if (rc & BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc & BG_ERR_CHECK) + checking = 0; + } +#endif + + /* setup DISEED with what we have */ + diseed = (struct sli4_sge_diseed *) sgl; + memset(diseed, 0, sizeof(struct sli4_sge_diseed)); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED); + + /* Endianness conversion if necessary */ + diseed->ref_tag = cpu_to_le32(reftag); + diseed->ref_tag_tran = diseed->ref_tag; + + /* + * We only need to check the data on READs, for WRITEs + * protection data is automatically generated, not checked. + */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + } + + /* setup DISEED with the rest of the info */ + bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); + bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); + + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); + bf_set(lpfc_sli4_sge_dif_me, diseed, 0); + + /* Endianness conversion if necessary for DISEED */ + diseed->word2 = cpu_to_le32(diseed->word2); + diseed->word3 = cpu_to_le32(diseed->word3); + + /* advance bpl and increment sge count */ + num_sge++; + sgl++; + + /* assumption: caller has already run dma_map_sg on command data */ + scsi_for_each_sg(sc, sgde, datasegcnt, i) { + physaddr = sg_dma_address(sgde); + dma_len = sg_dma_len(sgde); + sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); + sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + if ((i + 1) == datasegcnt) + bf_set(lpfc_sli4_sge_last, sgl, 1); + else + bf_set(lpfc_sli4_sge_last, sgl, 0); + bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); + + sgl->sge_len = cpu_to_le32(dma_len); + dma_offset += dma_len; + + sgl++; + num_sge++; + } out: + return num_sge; +} + +/** + * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @sgl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * @protcnt: number of segment of protection data that have been dma mapped + * + * This function sets up SGL buffer list for protection groups of + * type LPFC_PG_TYPE_DIF + * + * This is usually used when DIFs are in their own buffers, + * separate from the data. The HBA can then by instructed + * to place the DIFs in the outgoing stream. For read operations, + * The HBA could extract the DIFs and place it in DIF buffers. + * + * The buffer list for this type consists of one or more of the + * protection groups described below: + * +-------------------------+ + * start of first prot group --> | DISEED | + * +-------------------------+ + * | DIF (Prot SGE) | + * +-------------------------+ + * | Data SGE | + * +-------------------------+ + * |more Data SGE's ... (opt)| + * +-------------------------+ + * start of new prot group --> | DISEED | + * +-------------------------+ + * | ... | + * +-------------------------+ + * + * Note: It is assumed that both data and protection s/g buffers have been + * mapped for DMA + * + * Returns the number of SGEs added to the SGL. + **/ +static int +lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, + struct sli4_sge *sgl, int datacnt, int protcnt) +{ + struct scatterlist *sgde = NULL; /* s/g data entry */ + struct scatterlist *sgpe = NULL; /* s/g prot entry */ + struct sli4_sge_diseed *diseed = NULL; + dma_addr_t dataphysaddr, protphysaddr; + unsigned short curr_data = 0, curr_prot = 0; + unsigned int split_offset; + unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder; + unsigned int protgrp_blks, protgrp_bytes; + unsigned int remainder, subtotal; + int status; + unsigned char pgdone = 0, alldone = 0; + unsigned blksize; + uint32_t reftag; + uint8_t txop, rxop; + uint32_t dma_len; +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + uint32_t rc; +#endif + uint32_t checking = 1; + uint32_t dma_offset = 0; + int num_sge = 0; + sgpe = scsi_prot_sglist(sc); + sgde = scsi_sglist(sc); - return num_bde; + if (!sgpe || !sgde) { + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9082 Invalid s/g entry: data=0x%p prot=0x%p\n", + sgpe, sgde); + return 0; + } + + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) + goto out; + + /* extract some info from the scsi command */ + blksize = lpfc_cmd_blksize(sc); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1); + if (rc) { + if (rc & BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc & BG_ERR_CHECK) + checking = 0; + } +#endif + + split_offset = 0; + do { + /* Check to see if we ran out of space */ + if (num_sge >= (phba->cfg_total_seg_cnt - 2)) + return num_sge + 3; + + /* setup DISEED with what we have */ + diseed = (struct sli4_sge_diseed *) sgl; + memset(diseed, 0, sizeof(struct sli4_sge_diseed)); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED); + + /* Endianness conversion if necessary */ + diseed->ref_tag = cpu_to_le32(reftag); + diseed->ref_tag_tran = diseed->ref_tag; + + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) { + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + + } else { + bf_set(lpfc_sli4_sge_dif_ce, diseed, 0); + /* + * When in this mode, the hardware will replace + * the guard tag from the host with a + * newly generated good CRC for the wire. + * Switch to raw mode here to avoid this + * behavior. What the host sends gets put on the wire. + */ + if (txop == BG_OP_IN_CRC_OUT_CRC) { + txop = BG_OP_RAW_MODE; + rxop = BG_OP_RAW_MODE; + } + } + + + if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF)) + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + else + bf_set(lpfc_sli4_sge_dif_re, diseed, 0); + + /* setup DISEED with the rest of the info */ + bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); + bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); + + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); + bf_set(lpfc_sli4_sge_dif_me, diseed, 0); + + /* Endianness conversion if necessary for DISEED */ + diseed->word2 = cpu_to_le32(diseed->word2); + diseed->word3 = cpu_to_le32(diseed->word3); + + /* advance sgl and increment bde count */ + num_sge++; + sgl++; + + /* setup the first BDE that points to protection buffer */ + protphysaddr = sg_dma_address(sgpe) + protgroup_offset; + protgroup_len = sg_dma_len(sgpe) - protgroup_offset; + + /* must be integer multiple of the DIF block length */ + BUG_ON(protgroup_len % 8); + + /* Now setup DIF SGE */ + sgl->word2 = 0; + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF); + sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr)); + sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr)); + sgl->word2 = cpu_to_le32(sgl->word2); + + protgrp_blks = protgroup_len / 8; + protgrp_bytes = protgrp_blks * blksize; + + /* check if DIF SGE is crossing the 4K boundary; if so split */ + if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) { + protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff); + protgroup_offset += protgroup_remainder; + protgrp_blks = protgroup_remainder / 8; + protgrp_bytes = protgrp_blks * blksize; + } else { + protgroup_offset = 0; + curr_prot++; + } + + num_sge++; + + /* setup SGE's for data blocks associated with DIF data */ + pgdone = 0; + subtotal = 0; /* total bytes processed for current prot grp */ + while (!pgdone) { + /* Check to see if we ran out of space */ + if (num_sge >= phba->cfg_total_seg_cnt) + return num_sge + 1; + + if (!sgde) { + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9086 BLKGRD:%s Invalid data segment\n", + __func__); + return 0; + } + sgl++; + dataphysaddr = sg_dma_address(sgde) + split_offset; + + remainder = sg_dma_len(sgde) - split_offset; + + if ((subtotal + remainder) <= protgrp_bytes) { + /* we can use this whole buffer */ + dma_len = remainder; + split_offset = 0; + + if ((subtotal + remainder) == protgrp_bytes) + pgdone = 1; + } else { + /* must split this buffer with next prot grp */ + dma_len = protgrp_bytes - subtotal; + split_offset += dma_len; + } + + subtotal += dma_len; + + sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr)); + sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr)); + bf_set(lpfc_sli4_sge_last, sgl, 0); + bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); + + sgl->sge_len = cpu_to_le32(dma_len); + dma_offset += dma_len; + + num_sge++; + curr_data++; + + if (split_offset) + break; + + /* Move to the next s/g segment if possible */ + sgde = sg_next(sgde); + } + + if (protgroup_offset) { + /* update the reference tag */ + reftag += protgrp_blks; + sgl++; + continue; + } + + /* are we done ? */ + if (curr_prot == protcnt) { + bf_set(lpfc_sli4_sge_last, sgl, 1); + alldone = 1; + } else if (curr_prot < protcnt) { + /* advance to next prot buffer */ + sgpe = sg_next(sgpe); + sgl++; + + /* update the reference tag */ + reftag += protgrp_blks; + } else { + /* if we're here, we have a bug */ + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9085 BLKGRD: bug in %s\n", __func__); + } + + } while (!alldone); + +out: + + return num_sge; } -/* + +/** + * lpfc_prot_group_type - Get prtotection group type of SCSI command + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * * Given a SCSI command that supports DIF, determine composition of protection * groups involved in setting up buffer lists * - * Returns: - * for DIF (for both read and write) - * */ + * Returns: Protection group type (with or without DIF) + * + **/ static int lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) { @@ -1511,21 +2763,67 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) ret = LPFC_PG_TYPE_DIF_BUF; break; default: - lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9021 Unsupported protection op:%d\n", op); + if (phba) + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9021 Unsupported protection op:%d\n", + op); break; } - return ret; } -/* +/** + * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be adjusted. + * + * Adjust the data length to account for how much data + * is actually on the wire. + * + * returns the adjusted data length + **/ +static int +lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *sc = lpfc_cmd->pCmd; + int fcpdl; + + fcpdl = scsi_bufflen(sc); + + /* Check if there is protection data on the wire */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + /* Read check for protection data */ + if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) + return fcpdl; + + } else { + /* Write check for protection data */ + if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) + return fcpdl; + } + + /* + * If we are in DIF Type 1 mode every data block has a 8 byte + * DIF (trailer) attached to it. Must ajust FCP data length + * to account for the protection data. + */ + fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8; + + return fcpdl; +} + +/** + * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be prep'ed. + * * This is the protection/DIF aware version of * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the * two functions eventually, but for now, it's here - */ + **/ static int -lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, +lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) { struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; @@ -1535,8 +2833,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, uint32_t num_bde = 0; int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; int prot_group_type = 0; - int diflen, fcpdl; - unsigned blksize; + int fcpdl; /* * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd @@ -1557,28 +2854,28 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, return 1; lpfc_cmd->seg_cnt = datasegcnt; - if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9067 BLKGRD: %s: Too many sg segments" - " from dma_map_sg. Config %d, seg_cnt" - " %d\n", - __func__, phba->cfg_sg_seg_cnt, - lpfc_cmd->seg_cnt); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); switch (prot_group_type) { case LPFC_PG_TYPE_NO_DIF: + + /* Here we need to add a PDE5 and PDE6 to the count */ + if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt) + goto err; + num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, datasegcnt); - /* we shoud have 2 or more entries in buffer list */ + /* we should have 2 or more entries in buffer list */ if (num_bde < 2) goto err; break; - case LPFC_PG_TYPE_DIF_BUF:{ + + case LPFC_PG_TYPE_DIF_BUF: /* * This type indicates that protection buffers are * passed to the driver, so that needs to be prepared @@ -1593,31 +2890,28 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, } lpfc_cmd->prot_seg_cnt = protsegcnt; - if (lpfc_cmd->prot_seg_cnt - > phba->cfg_prot_sg_seg_cnt) { - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9068 BLKGRD: %s: Too many prot sg " - "segments from dma_map_sg. Config %d," - "prot_seg_cnt %d\n", __func__, - phba->cfg_prot_sg_seg_cnt, - lpfc_cmd->prot_seg_cnt); - dma_unmap_sg(&phba->pcidev->dev, - scsi_prot_sglist(scsi_cmnd), - scsi_prot_sg_count(scsi_cmnd), - datadir); - scsi_dma_unmap(scsi_cmnd); - return 1; - } + + /* + * There is a minimun of 4 BPLs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 4) > + (phba->cfg_total_seg_cnt - 2)) + goto err; num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); - /* we shoud have 3 or more entries in buffer list */ - if (num_bde < 3) + /* we should have 3 or more entries in buffer list */ + if ((num_bde < 3) || + (num_bde > phba->cfg_total_seg_cnt)) goto err; break; - } + case LPFC_PG_TYPE_INVALID: default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "9022 Unexpected protection group %i\n", prot_group_type); @@ -1636,18 +2930,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, iocb_cmd->ulpBdeCount = 1; iocb_cmd->ulpLe = 1; - fcpdl = scsi_bufflen(scsi_cmnd); - - if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) { - /* - * We are in DIF Type 1 mode - * Every data block has a 8 byte DIF (trailer) - * attached to it. Must ajust FCP data length - */ - blksize = lpfc_cmd_blksize(scsi_cmnd); - diflen = (fcpdl / blksize) * 8; - fcpdl += diflen; - } + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); /* @@ -1658,14 +2941,234 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, return 0; err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9023 Could not setup all needed BDE's" - "prot_group_type=%d, num_bde=%d\n", + "9023 Cannot setup S/G List for HBA" + "IO segs %d/%d BPL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, prot_group_type, num_bde); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; return 1; } /* + * This function calcuates the T10 DIF guard tag + * on the specified data using a CRC algorithmn + * using crc_t10dif. + */ +uint16_t +lpfc_bg_crc(uint8_t *data, int count) +{ + uint16_t crc = 0; + uint16_t x; + + crc = crc_t10dif(data, count); + x = cpu_to_be16(crc); + return x; +} + +/* + * This function calcuates the T10 DIF guard tag + * on the specified data using a CSUM algorithmn + * using ip_compute_csum. + */ +uint16_t +lpfc_bg_csum(uint8_t *data, int count) +{ + uint16_t ret; + + ret = ip_compute_csum(data, count); + return ret; +} + +/* + * This function examines the protection data to try to determine + * what type of T10-DIF error occurred. + */ +void +lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scatterlist *sgpe; /* s/g prot entry */ + struct scatterlist *sgde; /* s/g data entry */ + struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + struct scsi_dif_tuple *src = NULL; + uint8_t *data_src = NULL; + uint16_t guard_tag, guard_type; + uint16_t start_app_tag, app_tag; + uint32_t start_ref_tag, ref_tag; + int prot, protsegcnt; + int err_type, len, data_len; + int chk_ref, chk_app, chk_guard; + uint16_t sum; + unsigned blksize; + + err_type = BGS_GUARD_ERR_MASK; + sum = 0; + guard_tag = 0; + + /* First check to see if there is protection data to examine */ + prot = scsi_get_prot_op(cmd); + if ((prot == SCSI_PROT_READ_STRIP) || + (prot == SCSI_PROT_WRITE_INSERT) || + (prot == SCSI_PROT_NORMAL)) + goto out; + + /* Currently the driver just supports ref_tag and guard_tag checking */ + chk_ref = 1; + chk_app = 0; + chk_guard = 0; + + /* Setup a ptr to the protection data provided by the SCSI host */ + sgpe = scsi_prot_sglist(cmd); + protsegcnt = lpfc_cmd->prot_seg_cnt; + + if (sgpe && protsegcnt) { + + /* + * We will only try to verify guard tag if the segment + * data length is a multiple of the blksize. + */ + sgde = scsi_sglist(cmd); + blksize = lpfc_cmd_blksize(cmd); + data_src = (uint8_t *)sg_virt(sgde); + data_len = sgde->length; + if ((data_len & (blksize - 1)) == 0) + chk_guard = 1; + guard_type = scsi_host_get_guard(cmd->device->host); + + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */ + start_app_tag = src->app_tag; + len = sgpe->length; + while (src && protsegcnt) { + while (len) { + + /* + * First check to see if a protection data + * check is valid + */ + if ((src->ref_tag == 0xffffffff) || + (src->app_tag == 0xffff)) { + start_ref_tag++; + goto skipit; + } + + /* First Guard Tag checking */ + if (chk_guard) { + guard_tag = src->guard_tag; + if (lpfc_cmd_guard_csum(cmd)) + sum = lpfc_bg_csum(data_src, + blksize); + else + sum = lpfc_bg_crc(data_src, + blksize); + if ((guard_tag != sum)) { + err_type = BGS_GUARD_ERR_MASK; + goto out; + } + } + + /* Reference Tag checking */ + ref_tag = be32_to_cpu(src->ref_tag); + if (chk_ref && (ref_tag != start_ref_tag)) { + err_type = BGS_REFTAG_ERR_MASK; + goto out; + } + start_ref_tag++; + + /* App Tag checking */ + app_tag = src->app_tag; + if (chk_app && (app_tag != start_app_tag)) { + err_type = BGS_APPTAG_ERR_MASK; + goto out; + } +skipit: + len -= sizeof(struct scsi_dif_tuple); + if (len < 0) + len = 0; + src++; + + data_src += blksize; + data_len -= blksize; + + /* + * Are we at the end of the Data segment? + * The data segment is only used for Guard + * tag checking. + */ + if (chk_guard && (data_len == 0)) { + chk_guard = 0; + sgde = sg_next(sgde); + if (!sgde) + goto out; + + data_src = (uint8_t *)sg_virt(sgde); + data_len = sgde->length; + if ((data_len & (blksize - 1)) == 0) + chk_guard = 1; + } + } + + /* Goto the next Protection data segment */ + sgpe = sg_next(sgpe); + if (sgpe) { + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + len = sgpe->length; + } else { + src = NULL; + } + protsegcnt--; + } + } +out: + if (err_type == BGS_GUARD_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x1); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + phba->bg_guard_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9069 BLKGRD: LBA %lx grd_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + sum, guard_tag); + + } else if (err_type == BGS_REFTAG_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x3); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + + phba->bg_reftag_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9066 BLKGRD: LBA %lx ref_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + ref_tag, start_ref_tag); + + } else if (err_type == BGS_APPTAG_ERR_MASK) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x2); + cmd->result = DRIVER_SENSE << 24 + | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); + + phba->bg_apptag_err_cnt++; + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9041 BLKGRD: LBA %lx app_tag error %x != %x\n", + (unsigned long)scsi_get_lba(cmd), + app_tag, start_app_tag); + } +} + + +/* * This function checks for BlockGuard errors detected by * the HBA. In case of errors, the ASC/ASCQ fields in the * sense buffer will be set accordingly, paired with @@ -1688,12 +3191,6 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, uint32_t bgstat = bgf->bgstat; uint64_t failing_sector = 0; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9069 BLKGRD: BG ERROR in cmd" - " 0x%x lba 0x%llx blk cnt 0x%x " - "bgstat=0x%x bghm=0x%x\n", - cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd), - blk_rq_sectors(cmd->request), bgstat, bghm); - spin_lock(&_dump_buf_lock); if (!_dump_buf_done) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9070 BLKGRD: Saving" @@ -1716,18 +3213,24 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, if (lpfc_bgs_get_invalid_prof(bgstat)) { cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9072 BLKGRD: Invalid" - " BlockGuard profile. bgstat:0x%x\n", - bgstat); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9072 BLKGRD: Invalid BG Profile in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); ret = (-1); goto out; } if (lpfc_bgs_get_uninit_dif_block(bgstat)) { cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9073 BLKGRD: " - "Invalid BlockGuard DIF Block. bgstat:0x%x\n", - bgstat); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9073 BLKGRD: Invalid BG PDIF Block in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); ret = (-1); goto out; } @@ -1740,8 +3243,12 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_guard_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9055 BLKGRD: guard_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9055 BLKGRD: Guard Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_reftag_err(bgstat)) { @@ -1753,8 +3260,12 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_reftag_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9056 BLKGRD: ref_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9056 BLKGRD: Ref Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_apptag_err(bgstat)) { @@ -1766,32 +3277,60 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_apptag_err_cnt++; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9061 BLKGRD: app_tag error\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9061 BLKGRD: App Tag error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); } if (lpfc_bgs_get_hi_water_mark_present(bgstat)) { /* * setup sense data descriptor 0 per SPC-4 as an information - * field, and put the failing LBA in it + * field, and put the failing LBA in it. + * This code assumes there was also a guard/app/ref tag error + * indication. */ - cmd->sense_buffer[8] = 0; /* Information */ - cmd->sense_buffer[9] = 0xa; /* Add. length */ - bghm /= cmd->device->sector_size; + cmd->sense_buffer[7] = 0xc; /* Additional sense length */ + cmd->sense_buffer[8] = 0; /* Information descriptor type */ + cmd->sense_buffer[9] = 0xa; /* Additional descriptor length */ + cmd->sense_buffer[10] = 0x80; /* Validity bit */ + + /* bghm is a "on the wire" FC frame based count */ + switch (scsi_get_prot_op(cmd)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + bghm /= cmd->device->sector_size; + break; + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + bghm /= (cmd->device->sector_size + + sizeof(struct scsi_dif_tuple)); + break; + } failing_sector = scsi_get_lba(cmd); failing_sector += bghm; - put_unaligned_be64(failing_sector, &cmd->sense_buffer[10]); + /* Descriptor Information */ + put_unaligned_be64(failing_sector, &cmd->sense_buffer[12]); } if (!ret) { /* No error was reported - problem in FW? */ - cmd->result = ScsiResult(DID_ERROR, 0); - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9057 BLKGRD: no errors reported!\n"); + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG, + "9057 BLKGRD: Unknown error in cmd" + " 0x%x lba 0x%llx blk cnt 0x%x " + "bgstat=x%x bghm=x%x\n", cmd->cmnd[0], + (unsigned long long)scsi_get_lba(cmd), + blk_rq_sectors(cmd->request), bgstat, bghm); + + /* Calcuate what type of error it was */ + lpfc_calc_bg_err(phba, lpfc_cmd); } - out: return ret; } @@ -1805,8 +3344,8 @@ out: * field of @lpfc_cmd for device with SLI-4 interface spec. * * Return codes: - * 1 - Error - * 0 - Success + * 1 - Error + * 0 - Success **/ static int lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) @@ -1815,12 +3354,14 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) struct scatterlist *sgel = NULL; struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl; + struct sli4_sge *first_data_sgl; IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; dma_addr_t physaddr; uint32_t num_bde = 0; uint32_t dma_len; uint32_t dma_offset = 0; int nseg; + struct ulp_bde64 *bde; /* * There are three possibilities here - use scatter-gather segment, use @@ -1845,7 +3386,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) bf_set(lpfc_sli4_sge_last, sgl, 0); sgl->word2 = cpu_to_le32(sgl->word2); sgl += 1; - + first_data_sgl = sgl; lpfc_cmd->seg_cnt = nseg; if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:" @@ -1853,6 +3394,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) "dma_map_sg. Config %d, seg_cnt %d\n", __func__, phba->cfg_sg_seg_cnt, lpfc_cmd->seg_cnt); + lpfc_cmd->seg_cnt = 0; scsi_dma_unmap(scsi_cmnd); return 1; } @@ -1869,19 +3411,31 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) { physaddr = sg_dma_address(sgel); dma_len = sg_dma_len(sgel); - bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel)); sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + sgl->word2 = le32_to_cpu(sgl->word2); if ((num_bde + 1) == nseg) bf_set(lpfc_sli4_sge_last, sgl, 1); else bf_set(lpfc_sli4_sge_last, sgl, 0); bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); sgl->word2 = cpu_to_le32(sgl->word2); - sgl->word3 = cpu_to_le32(sgl->word3); + sgl->sge_len = cpu_to_le32(dma_len); dma_offset += dma_len; sgl++; } + /* setup the performance hint (first data BDE) if enabled */ + if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) { + bde = (struct ulp_bde64 *) + &(iocb_cmd->unsli3.sli3Words[5]); + bde->addrLow = first_data_sgl->addr_lo; + bde->addrHigh = first_data_sgl->addr_hi; + bde->tus.f.bdeSize = + le32_to_cpu(first_data_sgl->sge_len); + bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bde->tus.w = cpu_to_le32(bde->tus.w); + } } else { sgl += 1; /* clear the last flag in the fcp_rsp map entry */ @@ -1903,7 +3457,172 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * we need to set word 4 of IOCB here */ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); + + /* + * If the OAS driver feature is enabled and the lun is enabled for + * OAS, set the oas iocb related flags. + */ + if ((phba->cfg_fof) && ((struct lpfc_device_data *) + scsi_cmnd->device->hostdata)->oas_enabled) + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_OAS; + return 0; +} + +/** + * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This is the protection/DIF aware version of + * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the + * two functions eventually, but for now, it's here + **/ +static int +lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; + struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; + struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl); + IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; + uint32_t num_sge = 0; + int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; + int prot_group_type = 0; + int fcpdl; + + /* + * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd + * fcp_rsp regions to the first data sge entry + */ + if (scsi_sg_count(scsi_cmnd)) { + /* + * The driver stores the segment count returned from pci_map_sg + * because this a count of dma-mappings used to map the use_sg + * pages. They are not guaranteed to be the same for those + * architectures that implement an IOMMU. + */ + datasegcnt = dma_map_sg(&phba->pcidev->dev, + scsi_sglist(scsi_cmnd), + scsi_sg_count(scsi_cmnd), datadir); + if (unlikely(!datasegcnt)) + return 1; + + sgl += 1; + /* clear the last flag in the fcp_rsp map entry */ + sgl->word2 = le32_to_cpu(sgl->word2); + bf_set(lpfc_sli4_sge_last, sgl, 0); + sgl->word2 = cpu_to_le32(sgl->word2); + + sgl += 1; + lpfc_cmd->seg_cnt = datasegcnt; + + /* First check if data segment count from SCSI Layer is good */ + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) + goto err; + + prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); + + switch (prot_group_type) { + case LPFC_PG_TYPE_NO_DIF: + /* Here we need to add a DISEED to the count */ + if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt) + goto err; + + num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, + datasegcnt); + + /* we should have 2 or more entries in buffer list */ + if (num_sge < 2) + goto err; + break; + + case LPFC_PG_TYPE_DIF_BUF: + /* + * This type indicates that protection buffers are + * passed to the driver, so that needs to be prepared + * for DMA + */ + protsegcnt = dma_map_sg(&phba->pcidev->dev, + scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), datadir); + if (unlikely(!protsegcnt)) { + scsi_dma_unmap(scsi_cmnd); + return 1; + } + + lpfc_cmd->prot_seg_cnt = protsegcnt; + /* + * There is a minimun of 3 SGEs used for every + * protection data segment. + */ + if ((lpfc_cmd->prot_seg_cnt * 3) > + (phba->cfg_total_seg_cnt - 2)) + goto err; + + num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, + datasegcnt, protsegcnt); + + /* we should have 3 or more entries in buffer list */ + if ((num_sge < 3) || + (num_sge > phba->cfg_total_seg_cnt)) + goto err; + break; + + case LPFC_PG_TYPE_INVALID: + default: + scsi_dma_unmap(scsi_cmnd); + lpfc_cmd->seg_cnt = 0; + + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9083 Unexpected protection group %i\n", + prot_group_type); + return 1; + } + } + + switch (scsi_get_prot_op(scsi_cmnd)) { + case SCSI_PROT_WRITE_STRIP: + case SCSI_PROT_READ_STRIP: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP; + break; + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_INSERT: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT; + break; + case SCSI_PROT_WRITE_PASS: + case SCSI_PROT_READ_PASS: + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS; + break; + } + + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); + fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); + + /* + * Due to difference in data length between DIF/non-DIF paths, + * we need to set word 4 of IOCB here + */ + iocb_cmd->un.fcpi.fcpi_parm = fcpdl; + return 0; +err: + if (lpfc_cmd->seg_cnt) + scsi_dma_unmap(scsi_cmnd); + if (lpfc_cmd->prot_seg_cnt) + dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + scsi_cmnd->sc_data_direction); + + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9084 Cannot setup S/G List for HBA" + "IO segs %d/%d SGL %d SCSI %d: %d %d\n", + lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt, + phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt, + prot_group_type, num_sge); + + lpfc_cmd->seg_cnt = 0; + lpfc_cmd->prot_seg_cnt = 0; + return 1; } /** @@ -1915,8 +3634,8 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * lpfc_hba struct. * * Return codes: - * 1 - Error - * 0 - Success + * 1 - Error + * 0 - Success **/ static inline int lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) @@ -1925,6 +3644,25 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** + * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer + * using BlockGuard. + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This routine wraps the actual DMA mapping function pointer from the + * lpfc_hba struct. + * + * Return codes: + * 1 - Error + * 0 - Success + **/ +static inline int +lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); +} + +/** * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. @@ -1946,6 +3684,9 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode; unsigned long flags; + if (!pnode || !NLP_CHK_NODE_ACT(pnode)) + return; + /* If there is queuefull or busy condition send a scsi event */ if ((cmnd->result == SAM_STAT_TASK_SET_FULL) || (cmnd->result == SAM_STAT_BUSY)) { @@ -2079,8 +3820,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, if (resp_info & RSP_LEN_VALID) { rsplen = be32_to_cpu(fcprsp->rspRspLen); - if ((rsplen != 0 && rsplen != 4 && rsplen != 8) || - (fcprsp->rspInfo3 != RSP_NO_FAILURE)) { + if (rsplen != 0 && rsplen != 4 && rsplen != 8) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "2719 Invalid response length: " "tgt x%x lun x%x cmnd x%x rsplen x%x\n", @@ -2090,6 +3830,17 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, host_status = DID_ERROR; goto out; } + if (fcprsp->rspInfo3 != RSP_NO_FAILURE) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "2757 Protocol failure detected during " + "processing of FCP I/O op: " + "tgt x%x lun x%x cmnd x%x rspInfo3 x%x\n", + cmnd->device->id, + cmnd->device->lun, cmnd->cmnd[0], + fcprsp->rspInfo3); + host_status = DID_ERROR; + goto out; + } } if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) { @@ -2103,8 +3854,15 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } lp = (uint32_t *)cmnd->sense_buffer; - if (!scsi_status && (resp_info & RESID_UNDER)) - logit = LOG_FCP; + /* special handling for under run conditions */ + if (!scsi_status && (resp_info & RESID_UNDER)) { + /* don't log under runs if fcp set... */ + if (vport->cfg_log_verbose & LOG_FCP) + logit = LOG_FCP_ERROR; + /* unless operator says so */ + if (vport->cfg_log_verbose & LOG_FCP_UNDER) + logit = LOG_FCP_UNDER; + } lpfc_printf_vlog(vport, KERN_WARNING, logit, "9024 FCP command x%x failed: x%x SNS x%x x%x " @@ -2120,7 +3878,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, if (resp_info & RESID_UNDER) { scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId)); - lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER, "9025 FCP Read Underrun, expected %d, " "residual %d Data: x%x x%x x%x\n", be32_to_cpu(fcpcmd->fcpDl), @@ -2147,7 +3905,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /* * The cmnd->underflow is the minimum number of bytes that must - * be transfered for this command. Provided a sense condition + * be transferred for this command. Provided a sense condition * is not present, make sure the actual amount transferred is at * least the underflow value or fail. */ @@ -2174,15 +3932,24 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, * Check SLI validation that all the transfer was actually done * (fcpi_parm should be zero). Apply check only to reads. */ - } else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm && - (cmnd->sc_data_direction == DMA_FROM_DEVICE)) { + } else if (fcpi_parm && (cmnd->sc_data_direction == DMA_FROM_DEVICE)) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR, "9029 FCP Read Check Error Data: " - "x%x x%x x%x x%x\n", + "x%x x%x x%x x%x x%x\n", be32_to_cpu(fcpcmd->fcpDl), be32_to_cpu(fcprsp->rspResId), - fcpi_parm, cmnd->cmnd[0]); - host_status = DID_ERROR; + fcpi_parm, cmnd->cmnd[0], scsi_status); + switch (scsi_status) { + case SAM_STAT_GOOD: + case SAM_STAT_CHECK_CONDITION: + /* Fabric dropped a data frame. Fail any successful + * command in which we detected dropped frames. + * A status of good or some check conditions could + * be considered a successful command. + */ + host_status = DID_ERROR; + break; + } scsi_set_resid(cmnd, scsi_bufflen(cmnd)); } @@ -2210,17 +3977,57 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_vport *vport = pIocbIn->vport; struct lpfc_rport_data *rdata = lpfc_cmd->rdata; struct lpfc_nodelist *pnode = rdata->pnode; - struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + struct scsi_cmnd *cmd; int result; - struct scsi_device *tmp_sdev; int depth; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; - struct Scsi_Host *shost = cmd->device->host; + struct Scsi_Host *shost; uint32_t queue_depth, scsi_id; + uint32_t logit = LOG_FCP; + + /* Sanity check on return of outstanding command */ + if (!(lpfc_cmd->pCmd)) + return; + cmd = lpfc_cmd->pCmd; + shost = cmd->device->host; - lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; + lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK); lpfc_cmd->status = pIocbOut->iocb.ulpStatus; + /* pick up SLI4 exhange busy status from HBA */ + lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY; + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + if (lpfc_cmd->prot_data_type) { + struct scsi_dif_tuple *src = NULL; + + src = (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment; + /* + * Used to restore any changes to protection + * data for error injection. + */ + switch (lpfc_cmd->prot_data_type) { + case LPFC_INJERR_REFTAG: + src->ref_tag = + lpfc_cmd->prot_data; + break; + case LPFC_INJERR_APPTAG: + src->app_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + case LPFC_INJERR_GUARD: + src->guard_tag = + (uint16_t)lpfc_cmd->prot_data; + break; + default: + break; + } + + lpfc_cmd->prot_data = 0; + lpfc_cmd->prot_data_type = 0; + lpfc_cmd->prot_data_segment = NULL; + } +#endif if (pnode && NLP_CHK_NODE_ACT(pnode)) atomic_dec(&pnode->cmd_pending); @@ -2230,16 +4037,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_cmd->status = IOSTAT_DRIVER_REJECT; else if (lpfc_cmd->status >= IOSTAT_CNT) lpfc_cmd->status = IOSTAT_DEFAULT; - - lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, - "9030 FCP cmd x%x failed <%d/%d> " - "status: x%x result: x%x Data: x%x x%x\n", - cmd->cmnd[0], - cmd->device ? cmd->device->id : 0xffff, - cmd->device ? cmd->device->lun : 0xffff, - lpfc_cmd->status, lpfc_cmd->result, - pIocbOut->iocb.ulpContext, - lpfc_cmd->cur_iocbq.iocb.ulpIoTag); + if (lpfc_cmd->status == IOSTAT_FCP_RSP_ERROR && + !lpfc_cmd->fcp_rsp->rspStatus3 && + (lpfc_cmd->fcp_rsp->rspStatus2 & RESID_UNDER) && + !(vport->cfg_log_verbose & LOG_FCP_UNDER)) + logit = 0; + else + logit = LOG_FCP | LOG_FCP_UNDER; + lpfc_printf_vlog(vport, KERN_WARNING, logit, + "9030 FCP cmd x%x failed <%d/%d> " + "status: x%x result: x%x " + "sid: x%x did: x%x oxid: x%x " + "Data: x%x x%x\n", + cmd->cmnd[0], + cmd->device ? cmd->device->id : 0xffff, + cmd->device ? cmd->device->lun : 0xffff, + lpfc_cmd->status, lpfc_cmd->result, + vport->fc_myDID, + (pnode) ? pnode->nlp_DID : 0, + phba->sli_rev == LPFC_SLI_REV4 ? + lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff, + pIocbOut->iocb.ulpContext, + lpfc_cmd->cur_iocbq.iocb.ulpIoTag); switch (lpfc_cmd->status) { case IOSTAT_FCP_RSP_ERROR: @@ -2275,13 +4094,23 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_worker_wake_up(phba); break; case IOSTAT_LOCAL_REJECT: + case IOSTAT_REMOTE_STOP: + if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR || + lpfc_cmd->result == + IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR || + lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR || + lpfc_cmd->result == + IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) { + cmd->result = ScsiResult(DID_NO_CONNECT, 0); + break; + } if (lpfc_cmd->result == IOERR_INVALID_RPI || lpfc_cmd->result == IOERR_NO_RESOURCES || - lpfc_cmd->result == IOERR_ABORT_REQUESTED) { + lpfc_cmd->result == IOERR_ABORT_REQUESTED || + lpfc_cmd->result == IOERR_SLER_CMD_RCV_FAILURE) { cmd->result = ScsiResult(DID_REQUEUE, 0); break; } - if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED || lpfc_cmd->result == IOERR_TX_DMA_FAILED) && pIocbOut->iocb.unsli3.sli3_bg.bgstat) { @@ -2300,7 +4129,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, "on unprotected cmd\n"); } } - + if ((lpfc_cmd->status == IOSTAT_REMOTE_STOP) + && (phba->sli_rev == LPFC_SLI_REV4) + && (pnode && NLP_CHK_NODE_ACT(pnode))) { + /* This IO was aborted by the target, we don't + * know the rxid and because we did not send the + * ABTS we cannot generate and RRQ. + */ + lpfc_set_rrq_active(phba, pnode, + lpfc_cmd->cur_iocbq.sli4_lxritag, + 0, 0); + } /* else: fall through */ default: cmd->result = ScsiResult(DID_ERROR, 0); @@ -2311,9 +4150,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, || (pnode->nlp_state != NLP_STE_MAPPED_NODE)) cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, SAM_STAT_BUSY); - } else { + } else cmd->result = ScsiResult(DID_OK, 0); - } if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) { uint32_t *lp = (uint32_t *)cmd->sense_buffer; @@ -2346,14 +4184,16 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } spin_unlock_irqrestore(shost->host_lock, flags); } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { - if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && + if ((pnode->cmd_qdepth < vport->cfg_tgt_queue_depth) && time_after(jiffies, pnode->last_change_time + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { spin_lock_irqsave(shost->host_lock, flags); - pnode->cmd_qdepth += pnode->cmd_qdepth * - LPFC_TGTQ_RAMPUP_PCENT / 100; - if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) - pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; + depth = pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT + / 100; + depth = depth ? depth : 1; + pnode->cmd_qdepth += depth; + if (pnode->cmd_qdepth > vport->cfg_tgt_queue_depth) + pnode->cmd_qdepth = vport->cfg_tgt_queue_depth; pnode->last_change_time = jiffies; spin_unlock_irqrestore(shost->host_lock, flags); } @@ -2367,12 +4207,15 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + spin_lock_irqsave(&phba->hbalock, flags); + lpfc_cmd->pCmd = NULL; + spin_unlock_irqrestore(&phba->hbalock, flags); + /* * If there is a thread waiting for command completion * wake up the thread. */ spin_lock_irqsave(shost->host_lock, flags); - lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); spin_unlock_irqrestore(shost->host_lock, flags); @@ -2380,38 +4223,15 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, return; } - if (!result) - lpfc_rampup_queue_depth(vport, queue_depth); - - /* - * Check for queue full. If the lun is reporting queue full, then - * back off the lun queue depth to prevent target overloads. - */ - if (result == SAM_STAT_TASK_SET_FULL && pnode && - NLP_CHK_NODE_ACT(pnode)) { - shost_for_each_device(tmp_sdev, shost) { - if (tmp_sdev->id != scsi_id) - continue; - depth = scsi_track_queue_full(tmp_sdev, - tmp_sdev->queue_depth-1); - if (depth <= 0) - continue; - lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, - "0711 detected queue full - lun queue " - "depth adjusted to %d.\n", depth); - lpfc_send_sdev_queuedepth_change_event(phba, vport, - pnode, - tmp_sdev->lun, - depth+1, depth); - } - } + spin_lock_irqsave(&phba->hbalock, flags); + lpfc_cmd->pCmd = NULL; + spin_unlock_irqrestore(&phba->hbalock, flags); /* * If there is a thread waiting for command completion * wake up the thread. */ spin_lock_irqsave(shost->host_lock, flags); - lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); spin_unlock_irqrestore(shost->host_lock, flags); @@ -2457,6 +4277,9 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq); int datadir = scsi_cmnd->sc_data_direction; char tag[2]; + uint8_t *ptr; + bool sli4; + uint32_t fcpdl; if (!pnode || !NLP_CHK_NODE_ACT(pnode)) return; @@ -2468,7 +4291,12 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, int_to_scsilun(lpfc_cmd->pCmd->device->lun, &lpfc_cmd->fcp_cmnd->fcp_lun); - memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16); + ptr = &fcp_cmnd->fcpCdb[0]; + memcpy(ptr, scsi_cmnd->cmnd, scsi_cmnd->cmd_len); + if (scsi_cmnd->cmd_len < LPFC_FCP_CDB_LEN) { + ptr += scsi_cmnd->cmd_len; + memset(ptr, 0, (LPFC_FCP_CDB_LEN - scsi_cmnd->cmd_len)); + } if (scsi_populate_tag_msg(scsi_cmnd, tag)) { switch (tag[0]) { @@ -2483,7 +4311,10 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, break; } } else - fcp_cmnd->fcpCntl1 = 0; + fcp_cmnd->fcpCntl1 = SIMPLE_Q; + + sli4 = (phba->sli_rev == LPFC_SLI_REV4); + piocbq->iocb.un.fcpi.fcpi_XRdy = 0; /* * There are three possibilities here - use scatter-gather segment, use @@ -2494,11 +4325,16 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, if (scsi_sg_count(scsi_cmnd)) { if (datadir == DMA_TO_DEVICE) { iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR; - if (phba->sli_rev < LPFC_SLI_REV4) { - iocb_cmd->un.fcpi.fcpi_parm = 0; - iocb_cmd->ulpPU = 0; - } else - iocb_cmd->ulpPU = PARM_READ_CHECK; + iocb_cmd->ulpPU = PARM_READ_CHECK; + if (vport->cfg_first_burst_size && + (pnode->nlp_flag & NLP_FIRSTBURST)) { + fcpdl = scsi_bufflen(scsi_cmnd); + if (fcpdl < vport->cfg_first_burst_size) + piocbq->iocb.un.fcpi.fcpi_XRdy = fcpdl; + else + piocbq->iocb.un.fcpi.fcpi_XRdy = + vport->cfg_first_burst_size; + } fcp_cmnd->fcpCntl3 = WRITE_DATA; phba->fc4OutputRequests++; } else { @@ -2522,6 +4358,9 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, * of the scsi_cmnd request_buffer */ piocbq->iocb.ulpContext = pnode->nlp_rpi; + if (sli4) + piocbq->iocb.ulpContext = + phba->sli4_hba.rpi_ids[pnode->nlp_rpi]; if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE) piocbq->iocb.ulpFCP2Rcvy = 1; else @@ -2535,7 +4374,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit + * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2579,10 +4418,14 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); piocb->ulpCommand = CMD_FCP_ICMND64_CR; piocb->ulpContext = ndlp->nlp_rpi; - if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { - piocb->ulpFCP2Rcvy = 1; + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + piocb->ulpContext = + vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; } + piocb->ulpFCP2Rcvy = (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) ? 1 : 0; piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f); + piocb->ulpPU = 0; + piocb->un.fcpi.fcpi_parm = 0; /* ulpTimeout is only one byte */ if (lpfc_cmd->timeout > 0xff) { @@ -2601,7 +4444,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** - * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table + * lpfc_scsi_api_table_setup - Set up scsi api function jump table * @phba: The hba struct for which this call is being executed. * @dev_grp: The HBA PCI-Device group number. * @@ -2615,18 +4458,21 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf; phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd; - phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf; switch (dev_grp) { case LPFC_PCI_DEV_LP: phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3; phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3; + phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3; phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3; + phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3; break; case LPFC_PCI_DEV_OC: phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4; phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4; + phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4; phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4; + phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4; break; default: lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -2635,8 +4481,8 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) return -ENODEV; break; } - phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf; phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth; + phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl; return 0; } @@ -2675,7 +4521,7 @@ lpfc_info(struct Scsi_Host *host) { struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata; struct lpfc_hba *phba = vport->phba; - int len; + int len, link_speed = 0; static char lpfcinfobuf[384]; memset(lpfcinfobuf,0,384); @@ -2695,6 +4541,19 @@ lpfc_info(struct Scsi_Host *host) " port %s", phba->Port); } + len = strlen(lpfcinfobuf); + if (phba->sli_rev <= LPFC_SLI_REV3) { + link_speed = lpfc_sli_port_speed_get(phba); + } else { + if (phba->sli4_hba.link_state.logical_speed) + link_speed = + phba->sli4_hba.link_state.logical_speed; + else + link_speed = phba->sli4_hba.link_state.speed; + } + if (link_speed != 0) + snprintf(lpfcinfobuf + len, 384-len, + " Logical Link Speed: %d Mbps", link_speed); } return lpfcinfobuf; } @@ -2711,7 +4570,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) unsigned long poll_tmo_expires = (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo)); - if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt) + if (!list_empty(&phba->sli.ring[LPFC_FCP_RING].txcmplq)) mod_timer(&phba->fcp_poll_timer, poll_tmo_expires); } @@ -2762,17 +4621,17 @@ void lpfc_poll_timeout(unsigned long ptr) * SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily. **/ static int -lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) +lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) { - struct Scsi_Host *shost = cmnd->device->host; struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; - struct lpfc_rport_data *rdata = cmnd->device->hostdata; + struct lpfc_rport_data *rdata; struct lpfc_nodelist *ndlp; struct lpfc_scsi_buf *lpfc_cmd; struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); int err; + rdata = lpfc_rport_data_from_scsi_device(cmnd->device); err = fc_remote_port_chkready(rport); if (err) { cmnd->result = err; @@ -2780,8 +4639,8 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) } ndlp = rdata->pnode; - if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) && - scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { + if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) && + (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9058 BLKGRD: ERROR: rcvd protected cmd:%02x" @@ -2796,15 +4655,12 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) * Catch race where our node has transitioned, but the * transport is still transitioning. */ - if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { - cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0); - goto out_fail_command; - } - if (vport->cfg_max_scsicmpl_time && - (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)) - goto out_host_busy; + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + goto out_tgt_busy; + if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) + goto out_tgt_busy; - lpfc_cmd = lpfc_get_scsi_buf(phba); + lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp); if (lpfc_cmd == NULL) { lpfc_rampdown_queue_depth(phba); @@ -2823,68 +4679,30 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) lpfc_cmd->timeout = 0; lpfc_cmd->start_time = jiffies; cmnd->host_scribble = (unsigned char *)lpfc_cmd; - cmnd->scsi_done = done; if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) { if (vport->phba->cfg_enable_bg) { - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9033 BLKGRD: rcvd protected cmd:%02x op:%02x " - "str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], - cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8], - cmnd->cmnd[9]); - if (cmnd->cmnd[0] == READ_10) - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9035 BLKGRD: READ @ sector %llu, " - "count %u\n", - (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); - else if (cmnd->cmnd[0] == WRITE_10) - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9036 BLKGRD: WRITE @ sector %llu, " - "count %u cmd=%p\n", - (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request), - cmnd); + lpfc_printf_vlog(vport, + KERN_INFO, LOG_SCSI_CMD, + "9033 BLKGRD: rcvd %s cmd:x%x " + "sector x%llx cnt %u pt %x\n", + dif_op_str[scsi_get_prot_op(cmnd)], + cmnd->cmnd[0], + (unsigned long long)scsi_get_lba(cmnd), + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); } - err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); } else { if (vport->phba->cfg_enable_bg) { - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9038 BLKGRD: rcvd unprotected cmd:" - "%02x op:%02x str=%s\n", - cmnd->cmnd[0], scsi_get_prot_op(cmnd), - dif_op_str[scsi_get_prot_op(cmnd)]); - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9039 BLKGRD: CDB: %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x %02x\n", - cmnd->cmnd[0], cmnd->cmnd[1], - cmnd->cmnd[2], cmnd->cmnd[3], - cmnd->cmnd[4], cmnd->cmnd[5], - cmnd->cmnd[6], cmnd->cmnd[7], - cmnd->cmnd[8], cmnd->cmnd[9]); - if (cmnd->cmnd[0] == READ_10) - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9040 dbg: READ @ sector %llu, " - "count %u\n", - (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request)); - else if (cmnd->cmnd[0] == WRITE_10) - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9041 dbg: WRITE @ sector %llu, " - "count %u cmd=%p\n", + lpfc_printf_vlog(vport, + KERN_INFO, LOG_SCSI_CMD, + "9038 BLKGRD: rcvd PROT_NORMAL cmd: " + "x%x sector x%llx cnt %u pt %x\n", + cmnd->cmnd[0], (unsigned long long)scsi_get_lba(cmnd), - blk_rq_sectors(cmnd->request), cmnd); - else - lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, - "9042 dbg: parser not implemented\n"); + blk_rq_sectors(cmnd->request), + (cmnd->cmnd[1]>>5)); } err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); } @@ -2899,14 +4717,30 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); if (err) { atomic_dec(&ndlp->cmd_pending); + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "3376 FCP could not issue IOCB err %x" + "FCP cmd x%x <%d/%d> " + "sid: x%x did: x%x oxid: x%x " + "Data: x%x x%x x%x x%x\n", + err, cmnd->cmnd[0], + cmnd->device ? cmnd->device->id : 0xffff, + cmnd->device ? cmnd->device->lun : 0xffff, + vport->fc_myDID, ndlp->nlp_DID, + phba->sli_rev == LPFC_SLI_REV4 ? + lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff, + lpfc_cmd->cur_iocbq.iocb.ulpContext, + lpfc_cmd->cur_iocbq.iocb.ulpIoTag, + lpfc_cmd->cur_iocbq.iocb.ulpTimeout, + (uint32_t) + (cmnd->request->timeout / 1000)); + + goto out_host_busy_free_buf; } if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { - spin_unlock(shost->host_lock); lpfc_sli_handle_fast_ring_event(phba, &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ); - spin_lock(shost->host_lock); if (phba->cfg_poll & DISABLE_FCP_RING_INT) lpfc_poll_rearm_timer(phba); } @@ -2919,11 +4753,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; + out_tgt_busy: + return SCSI_MLQUEUE_TARGET_BUSY; + out_fail_command: - done(cmnd); + cmnd->scsi_done(cmnd); return 0; } + /** * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. @@ -2944,32 +4782,77 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) struct lpfc_iocbq *abtsiocb; struct lpfc_scsi_buf *lpfc_cmd; IOCB_t *cmd, *icmd; - int ret = SUCCESS; + int ret = SUCCESS, status = 0; + struct lpfc_sli_ring *pring_s4; + int ring_number, ret_val; + unsigned long flags, iflags; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); - fc_block_scsi_eh(cmnd); + status = fc_block_scsi_eh(cmnd); + if (status != 0 && status != SUCCESS) + return status; + + spin_lock_irqsave(&phba->hbalock, flags); + /* driver queued commands are in process of being flushed */ + if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) { + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "3168 SCSI Layer abort requested I/O has been " + "flushed by LLD.\n"); + return FAILED; + } + lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; - BUG_ON(!lpfc_cmd); + if (!lpfc_cmd || !lpfc_cmd->pCmd) { + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "2873 SCSI Layer I/O Abort Request IO CMPL Status " + "x%x ID %d LUN %d\n", + SUCCESS, cmnd->device->id, cmnd->device->lun); + return SUCCESS; + } + iocb = &lpfc_cmd->cur_iocbq; + /* the command is in process of being cancelled */ + if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) { + spin_unlock_irqrestore(&phba->hbalock, flags); + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "3169 SCSI Layer abort requested I/O has been " + "cancelled by LLD.\n"); + return FAILED; + } /* * If pCmd field of the corresponding lpfc_scsi_buf structure * points to a different SCSI command, then the driver has * already completed this command, but the midlayer did not - * see the completion before the eh fired. Just return - * SUCCESS. + * see the completion before the eh fired. Just return SUCCESS. */ - iocb = &lpfc_cmd->cur_iocbq; - if (lpfc_cmd->pCmd != cmnd) - goto out; + if (lpfc_cmd->pCmd != cmnd) { + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "3170 SCSI Layer abort requested I/O has been " + "completed by LLD.\n"); + goto out_unlock; + } BUG_ON(iocb->context1 != lpfc_cmd); - abtsiocb = lpfc_sli_get_iocbq(phba); + /* abort issued in recovery is still in progress */ + if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) { + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "3389 SCSI Layer I/O Abort Request is pending\n"); + spin_unlock_irqrestore(&phba->hbalock, flags); + goto wait_for_cmpl; + } + + abtsiocb = __lpfc_sli_get_iocbq(phba); if (abtsiocb == NULL) { ret = FAILED; - goto out; + goto out_unlock; } + /* Indicate the IO is being aborted by the driver. */ + iocb->iocb_flag |= LPFC_DRIVER_ABORTED; + /* * The scsi command can not be in txq and it is in flight because the * pCmd is still pointig at the SCSI command we have to abort. There @@ -2990,6 +4873,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) /* ABTS WQE must go to the same WQ as the WQE to be aborted */ abtsiocb->fcp_wqidx = iocb->fcp_wqidx; + abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX; if (lpfc_is_link_up(phba)) icmd->ulpCommand = CMD_ABORT_XRI_CN; @@ -2998,8 +4882,23 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl; abtsiocb->vport = vport; - if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) == - IOCB_ERROR) { + if (phba->sli_rev == LPFC_SLI_REV4) { + ring_number = MAX_SLI3_CONFIGURED_RINGS + iocb->fcp_wqidx; + pring_s4 = &phba->sli.ring[ring_number]; + /* Note: both hbalock and ring_lock must be set here */ + spin_lock_irqsave(&pring_s4->ring_lock, iflags); + ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno, + abtsiocb, 0); + spin_unlock_irqrestore(&pring_s4->ring_lock, iflags); + } else { + ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, + abtsiocb, 0); + } + /* no longer need the lock after this point */ + spin_unlock_irqrestore(&phba->hbalock, flags); + + + if (ret_val == IOCB_ERROR) { lpfc_sli_release_iocbq(phba, abtsiocb); ret = FAILED; goto out; @@ -3009,31 +4908,35 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) lpfc_sli_handle_fast_ring_event(phba, &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ); +wait_for_cmpl: lpfc_cmd->waitq = &waitq; /* Wait for abort to complete */ wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd), - (2*vport->cfg_devloss_tmo*HZ)); + msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000)); - spin_lock_irq(shost->host_lock); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->waitq = NULL; - spin_unlock_irq(shost->host_lock); + spin_unlock_irqrestore(shost->host_lock, flags); if (lpfc_cmd->pCmd == cmnd) { ret = FAILED; lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0748 abort handler timed out waiting " - "for abort to complete: ret %#x, ID %d, " - "LUN %d, snum %#lx\n", - ret, cmnd->device->id, cmnd->device->lun, - cmnd->serial_number); + "for abortng I/O (xri:x%x) to complete: " + "ret %#x, ID %d, LUN %d\n", + iocb->sli4_xritag, ret, + cmnd->device->id, cmnd->device->lun); } + goto out; - out: +out_unlock: + spin_unlock_irqrestore(&phba->hbalock, flags); +out: lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, "0749 SCSI Layer I/O Abort Request Status x%x ID %d " - "LUN %d snum %#lx\n", ret, cmnd->device->id, - cmnd->device->lun, cmnd->serial_number); + "LUN %d\n", ret, cmnd->device->id, + cmnd->device->lun); return ret; } @@ -3060,6 +4963,73 @@ lpfc_taskmgmt_name(uint8_t task_mgmt_cmd) } } + +/** + * lpfc_check_fcp_rsp - check the returned fcp_rsp to see if task failed + * @vport: The virtual port for which this call is being executed. + * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. + * + * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeded + * + * Return code : + * 0x2003 - Error + * 0x2002 - Success + **/ +static int +lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd) +{ + struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp; + uint32_t rsp_info; + uint32_t rsp_len; + uint8_t rsp_info_code; + int ret = FAILED; + + + if (fcprsp == NULL) + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "0703 fcp_rsp is missing\n"); + else { + rsp_info = fcprsp->rspStatus2; + rsp_len = be32_to_cpu(fcprsp->rspRspLen); + rsp_info_code = fcprsp->rspInfo3; + + + lpfc_printf_vlog(vport, KERN_INFO, + LOG_FCP, + "0706 fcp_rsp valid 0x%x," + " rsp len=%d code 0x%x\n", + rsp_info, + rsp_len, rsp_info_code); + + if ((fcprsp->rspStatus2&RSP_LEN_VALID) && (rsp_len == 8)) { + switch (rsp_info_code) { + case RSP_NO_FAILURE: + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "0715 Task Mgmt No Failure\n"); + ret = SUCCESS; + break; + case RSP_TM_NOT_SUPPORTED: /* TM rejected */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "0716 Task Mgmt Target " + "reject\n"); + break; + case RSP_TM_NOT_COMPLETED: /* TM failed */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "0717 Task Mgmt Target " + "failed TM\n"); + break; + case RSP_TM_INVALID_LU: /* TM to invalid LU! */ + lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, + "0718 Task Mgmt to invalid " + "LUN\n"); + break; + } + } + } + return ret; +} + + /** * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler * @vport: The virtual port for which this call is being executed. @@ -3084,16 +5054,17 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, struct lpfc_scsi_buf *lpfc_cmd; struct lpfc_iocbq *iocbq; struct lpfc_iocbq *iocbqrsp; + struct lpfc_nodelist *pnode = rdata->pnode; int ret; int status; - if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode)) + if (!pnode || !NLP_CHK_NODE_ACT(pnode)) return FAILED; - lpfc_cmd = lpfc_get_scsi_buf(phba); + lpfc_cmd = lpfc_get_scsi_buf(phba, rdata->pnode); if (lpfc_cmd == NULL) return FAILED; - lpfc_cmd->timeout = 60; + lpfc_cmd->timeout = phba->cfg_task_mgmt_tmo; lpfc_cmd->rdata = rdata; status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id, @@ -3109,27 +5080,40 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, lpfc_release_scsi_buf(phba, lpfc_cmd); return FAILED; } + iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0702 Issue %s to TGT %d LUN %d " - "rpi x%x nlp_flag x%x\n", + "rpi x%x nlp_flag x%x Data: x%x x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, - rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag); + pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag, + iocbq->iocb_flag); status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, iocbq, iocbqrsp, lpfc_cmd->timeout); - if (status != IOCB_SUCCESS) { - if (status == IOCB_TIMEDOUT) { - iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl; - ret = TIMEOUT_ERROR; - } else - ret = FAILED; - lpfc_cmd->status = IOSTAT_DRIVER_REJECT; + if ((status != IOCB_SUCCESS) || + (iocbqrsp->iocb.ulpStatus != IOSTAT_SUCCESS)) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n", + "0727 TMF %s to TGT %d LUN %d failed (%d, %d) " + "iocb_flag x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, iocbqrsp->iocb.ulpStatus, - iocbqrsp->iocb.un.ulpWord[4]); + iocbqrsp->iocb.un.ulpWord[4], + iocbq->iocb_flag); + /* if ulpStatus != IOCB_SUCCESS, then status == IOCB_SUCCESS */ + if (status == IOCB_SUCCESS) { + if (iocbqrsp->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR) + /* Something in the FCP_RSP was invalid. + * Check conditions */ + ret = lpfc_check_fcp_rsp(vport, lpfc_cmd); + else + ret = FAILED; + } else if (status == IOCB_TIMEDOUT) { + ret = TIMEOUT_ERROR; + } else { + ret = FAILED; + } + lpfc_cmd->status = IOSTAT_DRIVER_REJECT; } else ret = SUCCESS; @@ -3156,10 +5140,11 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, static int lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd) { - struct lpfc_rport_data *rdata = cmnd->device->hostdata; + struct lpfc_rport_data *rdata; struct lpfc_nodelist *pnode; unsigned long later; + rdata = lpfc_rport_data_from_scsi_device(cmnd->device); if (!rdata) { lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0797 Tgt Map rport failure: rdata x%p\n", rdata); @@ -3177,7 +5162,7 @@ lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd) if (pnode->nlp_state == NLP_STE_MAPPED_NODE) return SUCCESS; schedule_timeout_uninterruptible(msecs_to_jiffies(500)); - rdata = cmnd->device->hostdata; + rdata = lpfc_rport_data_from_scsi_device(cmnd->device); if (!rdata) return FAILED; pnode = rdata->pnode; @@ -3214,8 +5199,9 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id, cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context); if (cnt) - lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], - tgt_id, lun_id, context); + lpfc_sli_abort_taskmgmt(vport, + &phba->sli.ring[phba->sli.fcp_ring], + tgt_id, lun_id, context); later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; while (time_after(later, jiffies) && cnt) { schedule_timeout_uninterruptible(msecs_to_jiffies(20)); @@ -3249,20 +5235,23 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) { struct Scsi_Host *shost = cmnd->device->host; struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; - struct lpfc_rport_data *rdata = cmnd->device->hostdata; + struct lpfc_rport_data *rdata; struct lpfc_nodelist *pnode; unsigned tgt_id = cmnd->device->id; unsigned int lun_id = cmnd->device->lun; struct lpfc_scsi_event_header scsi_event; int status; + rdata = lpfc_rport_data_from_scsi_device(cmnd->device); if (!rdata) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0798 Device Reset rport failure: rdata x%p\n", rdata); return FAILED; } pnode = rdata->pnode; - fc_block_scsi_eh(cmnd); + status = fc_block_scsi_eh(cmnd); + if (status != 0 && status != SUCCESS) + return status; status = lpfc_chk_tgt_mapped(vport, cmnd); if (status == FAILED) { @@ -3293,8 +5282,10 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) * So, continue on. * We will report success if all the i/o aborts successfully. */ - status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, + if (status == SUCCESS) + status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, LPFC_CTX_LUN); + return status; } @@ -3314,20 +5305,23 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd) { struct Scsi_Host *shost = cmnd->device->host; struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; - struct lpfc_rport_data *rdata = cmnd->device->hostdata; + struct lpfc_rport_data *rdata; struct lpfc_nodelist *pnode; unsigned tgt_id = cmnd->device->id; unsigned int lun_id = cmnd->device->lun; struct lpfc_scsi_event_header scsi_event; int status; + rdata = lpfc_rport_data_from_scsi_device(cmnd->device); if (!rdata) { lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, "0799 Target Reset rport failure: rdata x%p\n", rdata); return FAILED; } pnode = rdata->pnode; - fc_block_scsi_eh(cmnd); + status = fc_block_scsi_eh(cmnd); + if (status != 0 && status != SUCCESS) + return status; status = lpfc_chk_tgt_mapped(vport, cmnd); if (status == FAILED) { @@ -3358,8 +5352,9 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd) * So, continue on. * We will report success if all the i/o aborts successfully. */ - status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, - LPFC_CTX_TGT); + if (status == SUCCESS) + status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id, + LPFC_CTX_TGT); return status; } @@ -3393,7 +5388,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID); - fc_block_scsi_eh(cmnd); + status = fc_block_scsi_eh(cmnd); + if (status != 0 && status != SUCCESS) + return status; /* * Since the driver manages a single bus device, reset all @@ -3407,6 +5404,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { if (!NLP_CHK_NODE_ACT(ndlp)) continue; + if (vport->phba->cfg_fcp2_no_tgt_reset && + (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE)) + continue; if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && ndlp->nlp_sid == i && ndlp->rport) { @@ -3445,6 +5445,51 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) } /** + * lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt + * @cmnd: Pointer to scsi_cmnd data structure. + * + * This routine does host reset to the adaptor port. It brings the HBA + * offline, performs a board restart, and then brings the board back online. + * The lpfc_offline calls lpfc_sli_hba_down which will abort and local + * reject all outstanding SCSI commands to the host and error returned + * back to SCSI mid-level. As this will be SCSI mid-level's last resort + * of error handling, it will only return error if resetting of the adapter + * is not successful; in all other cases, will return success. + * + * Return code : + * 0x2003 - Error + * 0x2002 - Success + **/ +static int +lpfc_host_reset_handler(struct scsi_cmnd *cmnd) +{ + struct Scsi_Host *shost = cmnd->device->host; + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int rc, ret = SUCCESS; + + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "3172 SCSI layer issued Host Reset Data:\n"); + + lpfc_offline_prep(phba, LPFC_MBX_WAIT); + lpfc_offline(phba); + rc = lpfc_sli_brdrestart(phba); + if (rc) + ret = FAILED; + rc = lpfc_online(phba); + if (rc) + ret = FAILED; + lpfc_unblock_mgmt_io(phba); + + if (ret == FAILED) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "3323 Failed host reset, bring it offline\n"); + lpfc_sli4_offline_eratt(phba); + } + return ret; +} + +/** * lpfc_slave_alloc - scsi_host_template slave_alloc entry point * @sdev: Pointer to scsi_device. * @@ -3466,11 +5511,47 @@ lpfc_slave_alloc(struct scsi_device *sdev) uint32_t total = 0; uint32_t num_to_alloc = 0; int num_allocated = 0; + uint32_t sdev_cnt; + struct lpfc_device_data *device_data; + unsigned long flags; + struct lpfc_name target_wwpn; if (!rport || fc_remote_port_chkready(rport)) return -ENXIO; - sdev->hostdata = rport->dd_data; + if (phba->cfg_fof) { + + /* + * Check to see if the device data structure for the lun + * exists. If not, create one. + */ + + u64_to_wwn(rport->port_name, target_wwpn.u.wwn); + spin_lock_irqsave(&phba->devicelock, flags); + device_data = __lpfc_get_device_data(phba, + &phba->luns, + &vport->fc_portname, + &target_wwpn, + sdev->lun); + if (!device_data) { + spin_unlock_irqrestore(&phba->devicelock, flags); + device_data = lpfc_create_device_data(phba, + &vport->fc_portname, + &target_wwpn, + sdev->lun, true); + if (!device_data) + return -ENOMEM; + spin_lock_irqsave(&phba->devicelock, flags); + list_add_tail(&device_data->listentry, &phba->luns); + } + device_data->rport_data = rport->dd_data; + device_data->available = true; + spin_unlock_irqrestore(&phba->devicelock, flags); + sdev->hostdata = device_data; + } else { + sdev->hostdata = rport->dd_data; + } + sdev_cnt = atomic_inc_return(&phba->sdev_cnt); /* * Populate the cmds_per_lun count scsi_bufs into this host's globally @@ -3482,6 +5563,10 @@ lpfc_slave_alloc(struct scsi_device *sdev) total = phba->total_scsi_bufs; num_to_alloc = vport->cfg_lun_queue_depth + 2; + /* If allocated buffers are enough do nothing */ + if ((sdev_cnt * (vport->cfg_lun_queue_depth + 2)) < total) + return 0; + /* Allow some exchanges to be available always to complete discovery */ if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, @@ -3501,11 +5586,11 @@ lpfc_slave_alloc(struct scsi_device *sdev) } num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc); if (num_to_alloc != num_allocated) { - lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, - "0708 Allocation request of %d " - "command buffers did not succeed. " - "Allocated %d buffers.\n", - num_to_alloc, num_allocated); + lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, + "0708 Allocation request of %d " + "command buffers did not succeed. " + "Allocated %d buffers.\n", + num_to_alloc, num_allocated); } if (num_allocated > 0) phba->total_scsi_bufs += num_allocated; @@ -3518,7 +5603,6 @@ lpfc_slave_alloc(struct scsi_device *sdev) * * This routine configures following items * - Tag command queuing support for @sdev if supported. - * - Dev loss time out value of fc_rport. * - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set. * * Return codes: @@ -3529,21 +5613,12 @@ lpfc_slave_configure(struct scsi_device *sdev) { struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata; struct lpfc_hba *phba = vport->phba; - struct fc_rport *rport = starget_to_rport(sdev->sdev_target); if (sdev->tagged_supported) scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth); else scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth); - /* - * Initialize the fc transport attributes for the target - * containing this scsi device. Also note that the driver's - * target pointer is stored in the starget_data for the - * driver's sysfs entry point functions. - */ - rport->dev_loss_tmo = vport->cfg_devloss_tmo; - if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { lpfc_sli_handle_fast_ring_event(phba, &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ); @@ -3563,10 +5638,346 @@ lpfc_slave_configure(struct scsi_device *sdev) static void lpfc_slave_destroy(struct scsi_device *sdev) { + struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata; + struct lpfc_hba *phba = vport->phba; + unsigned long flags; + struct lpfc_device_data *device_data = sdev->hostdata; + + atomic_dec(&phba->sdev_cnt); + if ((phba->cfg_fof) && (device_data)) { + spin_lock_irqsave(&phba->devicelock, flags); + device_data->available = false; + if (!device_data->oas_enabled) + lpfc_delete_device_data(phba, device_data); + spin_unlock_irqrestore(&phba->devicelock, flags); + } sdev->hostdata = NULL; return; } +/** + * lpfc_create_device_data - creates and initializes device data structure for OAS + * @pha: Pointer to host bus adapter structure. + * @vport_wwpn: Pointer to vport's wwpn information + * @target_wwpn: Pointer to target's wwpn information + * @lun: Lun on target + * @atomic_create: Flag to indicate if memory should be allocated using the + * GFP_ATOMIC flag or not. + * + * This routine creates a device data structure which will contain identifying + * information for the device (host wwpn, target wwpn, lun), state of OAS, + * whether or not the corresponding lun is available by the system, + * and pointer to the rport data. + * + * Return codes: + * NULL - Error + * Pointer to lpfc_device_data - Success + **/ +struct lpfc_device_data* +lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, + struct lpfc_name *target_wwpn, uint64_t lun, + bool atomic_create) +{ + + struct lpfc_device_data *lun_info; + int memory_flags; + + if (unlikely(!phba) || !vport_wwpn || !target_wwpn || + !(phba->cfg_fof)) + return NULL; + + /* Attempt to create the device data to contain lun info */ + + if (atomic_create) + memory_flags = GFP_ATOMIC; + else + memory_flags = GFP_KERNEL; + lun_info = mempool_alloc(phba->device_data_mem_pool, memory_flags); + if (!lun_info) + return NULL; + INIT_LIST_HEAD(&lun_info->listentry); + lun_info->rport_data = NULL; + memcpy(&lun_info->device_id.vport_wwpn, vport_wwpn, + sizeof(struct lpfc_name)); + memcpy(&lun_info->device_id.target_wwpn, target_wwpn, + sizeof(struct lpfc_name)); + lun_info->device_id.lun = lun; + lun_info->oas_enabled = false; + lun_info->available = false; + return lun_info; +} + +/** + * lpfc_delete_device_data - frees a device data structure for OAS + * @pha: Pointer to host bus adapter structure. + * @lun_info: Pointer to device data structure to free. + * + * This routine frees the previously allocated device data structure passed. + * + **/ +void +lpfc_delete_device_data(struct lpfc_hba *phba, + struct lpfc_device_data *lun_info) +{ + + if (unlikely(!phba) || !lun_info || + !(phba->cfg_fof)) + return; + + if (!list_empty(&lun_info->listentry)) + list_del(&lun_info->listentry); + mempool_free(lun_info, phba->device_data_mem_pool); + return; +} + +/** + * __lpfc_get_device_data - returns the device data for the specified lun + * @pha: Pointer to host bus adapter structure. + * @list: Point to list to search. + * @vport_wwpn: Pointer to vport's wwpn information + * @target_wwpn: Pointer to target's wwpn information + * @lun: Lun on target + * + * This routine searches the list passed for the specified lun's device data. + * This function does not hold locks, it is the responsibility of the caller + * to ensure the proper lock is held before calling the function. + * + * Return codes: + * NULL - Error + * Pointer to lpfc_device_data - Success + **/ +struct lpfc_device_data* +__lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list, + struct lpfc_name *vport_wwpn, + struct lpfc_name *target_wwpn, uint64_t lun) +{ + + struct lpfc_device_data *lun_info; + + if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn || + !phba->cfg_fof) + return NULL; + + /* Check to see if the lun is already enabled for OAS. */ + + list_for_each_entry(lun_info, list, listentry) { + if ((memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn, + sizeof(struct lpfc_name)) == 0) && + (memcmp(&lun_info->device_id.target_wwpn, target_wwpn, + sizeof(struct lpfc_name)) == 0) && + (lun_info->device_id.lun == lun)) + return lun_info; + } + + return NULL; +} + +/** + * lpfc_find_next_oas_lun - searches for the next oas lun + * @pha: Pointer to host bus adapter structure. + * @vport_wwpn: Pointer to vport's wwpn information + * @target_wwpn: Pointer to target's wwpn information + * @starting_lun: Pointer to the lun to start searching for + * @found_vport_wwpn: Pointer to the found lun's vport wwpn information + * @found_target_wwpn: Pointer to the found lun's target wwpn information + * @found_lun: Pointer to the found lun. + * @found_lun_status: Pointer to status of the found lun. + * + * This routine searches the luns list for the specified lun + * or the first lun for the vport/target. If the vport wwpn contains + * a zero value then a specific vport is not specified. In this case + * any vport which contains the lun will be considered a match. If the + * target wwpn contains a zero value then a specific target is not specified. + * In this case any target which contains the lun will be considered a + * match. If the lun is found, the lun, vport wwpn, target wwpn and lun status + * are returned. The function will also return the next lun if available. + * If the next lun is not found, starting_lun parameter will be set to + * NO_MORE_OAS_LUN. + * + * Return codes: + * non-0 - Error + * 0 - Success + **/ +bool +lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, + struct lpfc_name *target_wwpn, uint64_t *starting_lun, + struct lpfc_name *found_vport_wwpn, + struct lpfc_name *found_target_wwpn, + uint64_t *found_lun, + uint32_t *found_lun_status) +{ + + unsigned long flags; + struct lpfc_device_data *lun_info; + struct lpfc_device_id *device_id; + uint64_t lun; + bool found = false; + + if (unlikely(!phba) || !vport_wwpn || !target_wwpn || + !starting_lun || !found_vport_wwpn || + !found_target_wwpn || !found_lun || !found_lun_status || + (*starting_lun == NO_MORE_OAS_LUN) || + !phba->cfg_fof) + return false; + + lun = *starting_lun; + *found_lun = NO_MORE_OAS_LUN; + *starting_lun = NO_MORE_OAS_LUN; + + /* Search for lun or the lun closet in value */ + + spin_lock_irqsave(&phba->devicelock, flags); + list_for_each_entry(lun_info, &phba->luns, listentry) { + if (((wwn_to_u64(vport_wwpn->u.wwn) == 0) || + (memcmp(&lun_info->device_id.vport_wwpn, vport_wwpn, + sizeof(struct lpfc_name)) == 0)) && + ((wwn_to_u64(target_wwpn->u.wwn) == 0) || + (memcmp(&lun_info->device_id.target_wwpn, target_wwpn, + sizeof(struct lpfc_name)) == 0)) && + (lun_info->oas_enabled)) { + device_id = &lun_info->device_id; + if ((!found) && + ((lun == FIND_FIRST_OAS_LUN) || + (device_id->lun == lun))) { + *found_lun = device_id->lun; + memcpy(found_vport_wwpn, + &device_id->vport_wwpn, + sizeof(struct lpfc_name)); + memcpy(found_target_wwpn, + &device_id->target_wwpn, + sizeof(struct lpfc_name)); + if (lun_info->available) + *found_lun_status = + OAS_LUN_STATUS_EXISTS; + else + *found_lun_status = 0; + if (phba->cfg_oas_flags & OAS_FIND_ANY_VPORT) + memset(vport_wwpn, 0x0, + sizeof(struct lpfc_name)); + if (phba->cfg_oas_flags & OAS_FIND_ANY_TARGET) + memset(target_wwpn, 0x0, + sizeof(struct lpfc_name)); + found = true; + } else if (found) { + *starting_lun = device_id->lun; + memcpy(vport_wwpn, &device_id->vport_wwpn, + sizeof(struct lpfc_name)); + memcpy(target_wwpn, &device_id->target_wwpn, + sizeof(struct lpfc_name)); + break; + } + } + } + spin_unlock_irqrestore(&phba->devicelock, flags); + return found; +} + +/** + * lpfc_enable_oas_lun - enables a lun for OAS operations + * @pha: Pointer to host bus adapter structure. + * @vport_wwpn: Pointer to vport's wwpn information + * @target_wwpn: Pointer to target's wwpn information + * @lun: Lun + * + * This routine enables a lun for oas operations. The routines does so by + * doing the following : + * + * 1) Checks to see if the device data for the lun has been created. + * 2) If found, sets the OAS enabled flag if not set and returns. + * 3) Otherwise, creates a device data structure. + * 4) If successfully created, indicates the device data is for an OAS lun, + * indicates the lun is not available and add to the list of luns. + * + * Return codes: + * false - Error + * true - Success + **/ +bool +lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, + struct lpfc_name *target_wwpn, uint64_t lun) +{ + + struct lpfc_device_data *lun_info; + unsigned long flags; + + if (unlikely(!phba) || !vport_wwpn || !target_wwpn || + !phba->cfg_fof) + return false; + + spin_lock_irqsave(&phba->devicelock, flags); + + /* Check to see if the device data for the lun has been created */ + lun_info = __lpfc_get_device_data(phba, &phba->luns, vport_wwpn, + target_wwpn, lun); + if (lun_info) { + if (!lun_info->oas_enabled) + lun_info->oas_enabled = true; + spin_unlock_irqrestore(&phba->devicelock, flags); + return true; + } + + /* Create an lun info structure and add to list of luns */ + lun_info = lpfc_create_device_data(phba, vport_wwpn, target_wwpn, lun, + false); + if (lun_info) { + lun_info->oas_enabled = true; + lun_info->available = false; + list_add_tail(&lun_info->listentry, &phba->luns); + spin_unlock_irqrestore(&phba->devicelock, flags); + return true; + } + spin_unlock_irqrestore(&phba->devicelock, flags); + return false; +} + +/** + * lpfc_disable_oas_lun - disables a lun for OAS operations + * @pha: Pointer to host bus adapter structure. + * @vport_wwpn: Pointer to vport's wwpn information + * @target_wwpn: Pointer to target's wwpn information + * @lun: Lun + * + * This routine disables a lun for oas operations. The routines does so by + * doing the following : + * + * 1) Checks to see if the device data for the lun is created. + * 2) If present, clears the flag indicating this lun is for OAS. + * 3) If the lun is not available by the system, the device data is + * freed. + * + * Return codes: + * false - Error + * true - Success + **/ +bool +lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, + struct lpfc_name *target_wwpn, uint64_t lun) +{ + + struct lpfc_device_data *lun_info; + unsigned long flags; + + if (unlikely(!phba) || !vport_wwpn || !target_wwpn || + !phba->cfg_fof) + return false; + + spin_lock_irqsave(&phba->devicelock, flags); + + /* Check to see if the lun is available. */ + lun_info = __lpfc_get_device_data(phba, + &phba->luns, vport_wwpn, + target_wwpn, lun); + if (lun_info) { + lun_info->oas_enabled = false; + if (!lun_info->available) + lpfc_delete_device_data(phba, lun_info); + spin_unlock_irqrestore(&phba->devicelock, flags); + return true; + } + + spin_unlock_irqrestore(&phba->devicelock, flags); + return false; +} struct scsi_host_template lpfc_template = { .module = THIS_MODULE, @@ -3577,6 +5988,7 @@ struct scsi_host_template lpfc_template = { .eh_device_reset_handler = lpfc_device_reset_handler, .eh_target_reset_handler = lpfc_target_reset_handler, .eh_bus_reset_handler = lpfc_bus_reset_handler, + .eh_host_reset_handler = lpfc_host_reset_handler, .slave_alloc = lpfc_slave_alloc, .slave_configure = lpfc_slave_configure, .slave_destroy = lpfc_slave_destroy, @@ -3589,6 +6001,7 @@ struct scsi_host_template lpfc_template = { .max_sectors = 0xFFFF, .vendor_id = LPFC_NL_VENDOR_ID, .change_queue_depth = lpfc_change_queue_depth, + .change_queue_type = lpfc_change_queue_type, }; struct scsi_host_template lpfc_vport_template = { @@ -3611,4 +6024,5 @@ struct scsi_host_template lpfc_vport_template = { .shost_attrs = lpfc_vport_attrs, .max_sectors = 0xFFFF, .change_queue_depth = lpfc_change_queue_depth, + .change_queue_type = lpfc_change_queue_type, }; |