diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 2026 |
1 files changed, 1612 insertions, 414 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 3512abb8a58..1d7a5c34ee8 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2009 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/aer.h> #include <linux/gfp.h> #include <linux/kernel.h> @@ -52,6 +53,13 @@ #define LPFC_MIN_DEVLOSS_TMO 1 #define LPFC_MAX_DEVLOSS_TMO 255 +/* + * Write key size should be multiple of 4. If write key is changed + * make sure that library write key is also changed. + */ +#define LPFC_REG_WRITE_KEY_SIZE 4 +#define LPFC_REG_WRITE_KEY "EMLX" + /** * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. @@ -343,10 +351,23 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; - char fwrev[32]; + uint32_t if_type; + uint8_t sli_family; + char fwrev[FW_REV_STR_SIZE]; + int len; lpfc_decode_firmware_rev(phba, fwrev, 1); - return snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", fwrev, phba->sli_rev); + if_type = phba->sli4_hba.pc_sli4_params.if_type; + sli_family = phba->sli4_hba.pc_sli4_params.sli_family; + + if (phba->sli_rev < LPFC_SLI_REV4) + len = snprintf(buf, PAGE_SIZE, "%s, sli-%d\n", + fwrev, phba->sli_rev); + else + len = snprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n", + fwrev, phba->sli_rev, if_type, sli_family); + + return len; } /** @@ -480,6 +501,55 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, } /** + * lpfc_sli4_protocol_show - Return the fip mode of the HBA + * @dev: class unused variable. + * @attr: device attribute, not used. + * @buf: on return contains the module description text. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + if (phba->sli_rev < LPFC_SLI_REV4) + return snprintf(buf, PAGE_SIZE, "fc\n"); + + if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) { + if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE) + return snprintf(buf, PAGE_SIZE, "fcoe\n"); + if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) + return snprintf(buf, PAGE_SIZE, "fc\n"); + } + return snprintf(buf, PAGE_SIZE, "unknown\n"); +} + +/** + * lpfc_oas_supported_show - Return whether or not Optimized Access Storage + * (OAS) is supported. + * @dev: class unused variable. + * @attr: device attribute, not used. + * @buf: on return contains the module description text. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + return snprintf(buf, PAGE_SIZE, "%d\n", + phba->sli4_hba.pc_sli4_params.oas_supported); +} + +/** * lpfc_link_state_store - Transition the link_state on an HBA port * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. @@ -623,10 +693,14 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) int status = 0; int cnt = 0; int i; + int rc; init_completion(&online_compl); - lpfc_workq_post_event(phba, &status, &online_compl, + rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_OFFLINE_PREP); + if (rc == 0) + return -ENOMEM; + wait_for_completion(&online_compl); if (status != 0) @@ -639,7 +713,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) */ for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; - while (pring->txcmplq_cnt) { + while (!list_empty(&pring->txcmplq)) { msleep(10); if (cnt++ > 500) { /* 5 secs */ lpfc_printf_log(phba, @@ -652,7 +726,10 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) } init_completion(&online_compl); - lpfc_workq_post_event(phba, &status, &online_compl, type); + rc = lpfc_workq_post_event(phba, &status, &online_compl, type); + if (rc == 0) + return -ENOMEM; + wait_for_completion(&online_compl); if (status != 0) @@ -671,29 +748,36 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) * * Notes: * Assumes any error from lpfc_do_offline() will be negative. + * Do not make this function static. * * Returns: * lpfc_do_offline() return code if not zero * -EIO reset not configured or error posting the event * zero for success **/ -static int +int lpfc_selective_reset(struct lpfc_hba *phba) { struct completion online_compl; int status = 0; + int rc; if (!phba->cfg_enable_hba_reset) - return -EIO; + return -EACCES; - status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + if (!(phba->pport->fc_flag & FC_OFFLINE_MODE)) { + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); - if (status != 0) - return status; + if (status != 0) + return status; + } init_completion(&online_compl); - lpfc_workq_post_event(phba, &status, &online_compl, + rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_ONLINE); + if (rc == 0) + return -ENOMEM; + wait_for_completion(&online_compl); if (status != 0) @@ -730,11 +814,13 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; - int status = -EINVAL; + if (!phba->cfg_enable_hba_reset) + return -EACCES; + if (strncmp(buf, "selective", sizeof("selective") - 1) == 0) - status = lpfc_selective_reset(phba); + status = phba->lpfc_selective_reset(phba); if (status == 0) return strlen(buf); @@ -743,6 +829,172 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** + * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness + * @phba: lpfc_hba pointer. + * + * Description: + * SLI4 interface type-2 device to wait on the sliport status register for + * the readyness after performing a firmware reset. + * + * Returns: + * zero for success, -EPERM when port does not have privilege to perform the + * reset, -EIO when port timeout from recovering from the reset. + * + * Note: + * As the caller will interpret the return code by value, be careful in making + * change or addition to return codes. + **/ +int +lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) +{ + struct lpfc_register portstat_reg = {0}; + int i; + + msleep(100); + lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, + &portstat_reg.word0); + + /* verify if privileged for the request operation */ + if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) && + !bf_get(lpfc_sliport_status_err, &portstat_reg)) + return -EPERM; + + /* wait for the SLI port firmware ready after firmware reset */ + for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) { + msleep(10); + lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, + &portstat_reg.word0); + if (!bf_get(lpfc_sliport_status_err, &portstat_reg)) + continue; + if (!bf_get(lpfc_sliport_status_rn, &portstat_reg)) + continue; + if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg)) + continue; + break; + } + + if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT) + return 0; + else + return -EIO; +} + +/** + * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc + * @phba: lpfc_hba pointer. + * + * Description: + * Request SLI4 interface type-2 device to perform a physical register set + * access. + * + * Returns: + * zero for success + **/ +static ssize_t +lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) +{ + struct completion online_compl; + struct pci_dev *pdev = phba->pcidev; + uint32_t before_fc_flag; + uint32_t sriov_nr_virtfn; + uint32_t reg_val; + int status = 0, rc = 0; + int job_posted = 1, sriov_err; + + if (!phba->cfg_enable_hba_reset) + return -EACCES; + + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + + /* Keep state if we need to restore back */ + before_fc_flag = phba->pport->fc_flag; + sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn; + + /* Disable SR-IOV virtual functions if enabled */ + if (phba->cfg_sriov_nr_virtfn) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + + if (opcode == LPFC_FW_DUMP) + phba->hba_flag |= HBA_FW_DUMP_OP; + + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + + if (status != 0) { + phba->hba_flag &= ~HBA_FW_DUMP_OP; + return status; + } + + /* wait for the device to be quiesced before firmware reset */ + msleep(100); + + reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + + if (opcode == LPFC_FW_DUMP) + reg_val |= LPFC_FW_DUMP_REQUEST; + else if (opcode == LPFC_FW_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_FRST; + else if (opcode == LPFC_DV_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_DRST; + + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + /* flush */ + readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); + + /* delay driver action following IF_TYPE_2 reset */ + rc = lpfc_sli4_pdev_status_reg_wait(phba); + + if (rc == -EPERM) { + /* no privilege for reset */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3150 No privilege to perform the requested " + "access: x%x\n", reg_val); + } else if (rc == -EIO) { + /* reset failed, there is nothing more we can do */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3153 Fail to perform the requested " + "access: x%x\n", reg_val); + return rc; + } + + /* keep the original port state */ + if (before_fc_flag & FC_OFFLINE_MODE) + goto out; + + init_completion(&online_compl); + job_posted = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (!job_posted) + goto out; + + wait_for_completion(&online_compl); + +out: + /* in any case, restore the virtual functions enabled as before */ + if (sriov_nr_virtfn) { + sriov_err = + lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn); + if (!sriov_err) + phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn; + } + + /* return proper error code */ + if (!rc) { + if (!job_posted) + rc = -ENOMEM; + else if (status) + rc = -EIO; + } + return rc; +} + +/** * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. @@ -811,35 +1063,62 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct completion online_compl; - int status=0; + char *board_mode_str = NULL; + int status = 0; + int rc; + + if (!phba->cfg_enable_hba_reset) { + status = -EACCES; + goto board_mode_out; + } + + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3050 lpfc_board_mode set to %s\n", buf); - if (!phba->cfg_enable_hba_reset) - return -EACCES; init_completion(&online_compl); if(strncmp(buf, "online", sizeof("online") - 1) == 0) { - lpfc_workq_post_event(phba, &status, &online_compl, + rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_ONLINE); + if (rc == 0) { + status = -ENOMEM; + goto board_mode_out; + } wait_for_completion(&online_compl); } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0) if (phba->sli_rev == LPFC_SLI_REV4) - return -EINVAL; + status = -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_WARM_START); else if (strncmp(buf, "error", sizeof("error") - 1) == 0) if (phba->sli_rev == LPFC_SLI_REV4) - return -EINVAL; + status = -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_KILL); + else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); + else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); + else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); else - return -EINVAL; + status = -EINVAL; +board_mode_out: if (!status) return strlen(buf); - else - return -EIO; + else { + board_mode_str = strchr(buf, '\n'); + if (board_mode_str) + *board_mode_str = '\0'; + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3097 Failed \"%s\", status(%d), " + "fc_flag(x%x)\n", + buf, status, phba->pport->fc_flag); + return status; + } } /** @@ -1202,6 +1481,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, if (phba->sli_rev == LPFC_SLI_REV4) val = 0; + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3051 lpfc_poll changed from %d to %d\n", + phba->cfg_poll, val); + spin_lock_irq(&phba->hbalock); old_val = phba->cfg_poll; @@ -1209,7 +1492,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, if (val & ENABLE_FCP_RING_POLLING) { if ((val & DISABLE_FCP_RING_INT) && !(old_val & DISABLE_FCP_RING_INT)) { - creg_val = readl(phba->HCregaddr); + if (lpfc_readl(phba->HCregaddr, &creg_val)) { + spin_unlock_irq(&phba->hbalock); + return -EINVAL; + } creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING); writel(creg_val, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ @@ -1227,7 +1513,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, spin_unlock_irq(&phba->hbalock); del_timer(&phba->fcp_poll_timer); spin_lock_irq(&phba->hbalock); - creg_val = readl(phba->HCregaddr); + if (lpfc_readl(phba->HCregaddr, &creg_val)) { + spin_unlock_irq(&phba->hbalock); + return -EINVAL; + } creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); writel(creg_val, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ @@ -1279,6 +1568,54 @@ lpfc_fips_rev_show(struct device *dev, struct device_attribute *attr, } /** + * lpfc_dss_show - Return the current state of dss and the configured state + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted text. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_dss_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + return snprintf(buf, PAGE_SIZE, "%s - %sOperational\n", + (phba->cfg_enable_dss) ? "Enabled" : "Disabled", + (phba->sli3_options & LPFC_SLI3_DSS_ENABLED) ? + "" : "Not "); +} + +/** + * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted support level. + * + * Description: + * Returns the maximum number of virtual functions a physical function can + * support, 0 will be returned if called on virtual function. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_sriov_hw_max_virtfn_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + uint16_t max_nr_virtfn; + + max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba); + return snprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); +} + +/** * lpfc_param_show - Return a cfg attribute value in decimal * * Description: @@ -1393,6 +1730,9 @@ static int \ lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \ { \ if (val >= minval && val <= maxval) {\ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ + "3052 lpfc_" #attr " changed from %d to %d\n", \ + phba->cfg_##attr, val); \ phba->cfg_##attr = val;\ return 0;\ }\ @@ -1550,6 +1890,11 @@ static int \ lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \ { \ if (val >= minval && val <= maxval) {\ + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ + "3053 lpfc_" #attr \ + " changed from %d (x%x) to %d (x%x)\n", \ + vport->cfg_##attr, vport->cfg_##attr, \ + val, val); \ vport->cfg_##attr = val;\ return 0;\ }\ @@ -1597,13 +1942,13 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ #define LPFC_ATTR(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_param_init(name, defval, minval, maxval) #define LPFC_ATTR_R(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_param_show(name)\ lpfc_param_init(name, defval, minval, maxval)\ @@ -1611,7 +1956,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL) #define LPFC_ATTR_RW(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_param_show(name)\ lpfc_param_init(name, defval, minval, maxval)\ @@ -1622,7 +1967,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\ #define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_param_hex_show(name)\ lpfc_param_init(name, defval, minval, maxval)\ @@ -1630,7 +1975,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL) #define LPFC_ATTR_HEX_RW(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_param_hex_show(name)\ lpfc_param_init(name, defval, minval, maxval)\ @@ -1641,13 +1986,13 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\ #define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_vport_param_init(name, defval, minval, maxval) #define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_vport_param_show(name)\ lpfc_vport_param_init(name, defval, minval, maxval)\ @@ -1655,7 +2000,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL) #define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_vport_param_show(name)\ lpfc_vport_param_init(name, defval, minval, maxval)\ @@ -1666,7 +2011,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\ #define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_vport_param_hex_show(name)\ lpfc_vport_param_init(name, defval, minval, maxval)\ @@ -1674,7 +2019,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL) #define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \ static uint lpfc_##name = defval;\ -module_param(lpfc_##name, uint, 0);\ +module_param(lpfc_##name, uint, S_IRUGO);\ MODULE_PARM_DESC(lpfc_##name, desc);\ lpfc_vport_param_hex_show(name)\ lpfc_vport_param_init(name, defval, minval, maxval)\ @@ -1718,10 +2063,57 @@ static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL); static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL); static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL); - +static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL); +static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO, + lpfc_sriov_hw_max_virtfn_show, NULL); +static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL); +static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show, + NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; +#define WWN_SZ 8 +/** + * lpfc_wwn_set - Convert string to the 8 byte WWN value. + * @buf: WWN string. + * @cnt: Length of string. + * @wwn: Array to receive converted wwn value. + * + * Returns: + * -EINVAL if the buffer does not contain a valid wwn + * 0 success + **/ +static size_t +lpfc_wwn_set(const char *buf, size_t cnt, char wwn[]) +{ + unsigned int i, j; + + /* Count may include a LF at end of string */ + if (buf[cnt-1] == '\n') + cnt--; + + if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) || + ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) + return -EINVAL; + memset(wwn, 0, WWN_SZ); + + /* Validate and store the new name */ + for (i = 0, j = 0; i < 16; i++) { + if ((*buf >= 'a') && (*buf <= 'f')) + j = ((j << 4) | ((*buf++ - 'a') + 10)); + else if ((*buf >= 'A') && (*buf <= 'F')) + j = ((j << 4) | ((*buf++ - 'A') + 10)); + else if ((*buf >= '0') && (*buf <= '9')) + j = ((j << 4) | (*buf++ - '0')); + else + return -EINVAL; + if (i % 2) { + wwn[i/2] = j & 0xff; + j = 0; + } + } + return 0; +} /** * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid * @dev: class device that is converted into a Scsi_host. @@ -1810,9 +2202,10 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; struct completion online_compl; - int stat1=0, stat2=0; - unsigned int i, j, cnt=count; - u8 wwpn[8]; + int stat1 = 0, stat2 = 0; + unsigned int cnt = count; + u8 wwpn[WWN_SZ]; + int rc; if (!phba->cfg_enable_hba_reset) return -EACCES; @@ -1826,29 +2219,19 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, if (buf[cnt-1] == '\n') cnt--; - if (!phba->soft_wwn_enable || (cnt < 16) || (cnt > 18) || - ((cnt == 17) && (*buf++ != 'x')) || - ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) + if (!phba->soft_wwn_enable) return -EINVAL; + /* lock setting wwpn, wwnn down */ phba->soft_wwn_enable = 0; - memset(wwpn, 0, sizeof(wwpn)); - - /* Validate and store the new name */ - for (i=0, j=0; i < 16; i++) { - int value; - - value = hex_to_bin(*buf++); - if (value >= 0) - j = (j << 4) | value; - else - return -EINVAL; - if (i % 2) { - wwpn[i/2] = j & 0xff; - j = 0; - } + rc = lpfc_wwn_set(buf, cnt, wwpn); + if (!rc) { + /* not able to set wwpn, unlock it */ + phba->soft_wwn_enable = 1; + return rc; } + phba->cfg_soft_wwpn = wwn_to_u64(wwpn); fc_host_port_name(shost) = phba->cfg_soft_wwpn; if (phba->cfg_soft_wwnn) @@ -1863,7 +2246,11 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, "0463 lpfc_soft_wwpn attribute set failed to " "reinit adapter - %d\n", stat1); init_completion(&online_compl); - lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE); + rc = lpfc_workq_post_event(phba, &stat2, &online_compl, + LPFC_EVT_ONLINE); + if (rc == 0) + return -ENOMEM; + wait_for_completion(&online_compl); if (stat2) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -1871,7 +2258,7 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr, "reinit adapter - %d\n", stat2); return (stat1 || stat2) ? -EIO : count; } -static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ +static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR, lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); /** @@ -1908,39 +2295,25 @@ lpfc_soft_wwnn_store(struct device *dev, struct device_attribute *attr, { struct Scsi_Host *shost = class_to_shost(dev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; - unsigned int i, j, cnt=count; - u8 wwnn[8]; + unsigned int cnt = count; + u8 wwnn[WWN_SZ]; + int rc; /* count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; - if (!phba->soft_wwn_enable || (cnt < 16) || (cnt > 18) || - ((cnt == 17) && (*buf++ != 'x')) || - ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) + if (!phba->soft_wwn_enable) return -EINVAL; - /* - * Allow wwnn to be set many times, as long as the enable is set. - * However, once the wwpn is set, everything locks. - */ - - memset(wwnn, 0, sizeof(wwnn)); - - /* Validate and store the new name */ - for (i=0, j=0; i < 16; i++) { - int value; - - value = hex_to_bin(*buf++); - if (value >= 0) - j = (j << 4) | value; - else - return -EINVAL; - if (i % 2) { - wwnn[i/2] = j & 0xff; - j = 0; - } + rc = lpfc_wwn_set(buf, cnt, wwnn); + if (!rc) { + /* Allow wwnn to be set many times, as long as the enable + * is set. However, once the wwpn is set, everything locks. + */ + return rc; } + phba->cfg_soft_wwnn = wwn_to_u64(wwnn); dev_printk(KERN_NOTICE, &phba->pcidev->dev, @@ -1949,12 +2322,441 @@ lpfc_soft_wwnn_store(struct device *dev, struct device_attribute *attr, return count; } -static DEVICE_ATTR(lpfc_soft_wwnn, S_IRUGO | S_IWUSR,\ +static DEVICE_ATTR(lpfc_soft_wwnn, S_IRUGO | S_IWUSR, lpfc_soft_wwnn_show, lpfc_soft_wwnn_store); +/** + * lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for + * Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * Returns: + * value of count + **/ +static ssize_t +lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + return snprintf(buf, PAGE_SIZE, "0x%llx\n", + wwn_to_u64(phba->cfg_oas_tgt_wwpn)); +} + +/** + * lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for + * Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * @count: Size of the data buffer. + * + * Returns: + * -EINVAL count is invalid, invalid wwpn byte invalid + * -EPERM oas is not supported by hba + * value of count on success + **/ +static ssize_t +lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + unsigned int cnt = count; + uint8_t wwpn[WWN_SZ]; + int rc; + + if (!phba->cfg_fof) + return -EPERM; + + /* count may include a LF at end of string */ + if (buf[cnt-1] == '\n') + cnt--; + + rc = lpfc_wwn_set(buf, cnt, wwpn); + if (rc) + return rc; + + memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); + memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); + if (wwn_to_u64(wwpn) == 0) + phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET; + else + phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET; + phba->cfg_oas_flags &= ~OAS_LUN_VALID; + phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; + return count; +} +static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR, + lpfc_oas_tgt_show, lpfc_oas_tgt_store); + +/** + * lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled + * for Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * Returns: + * value of count on success + **/ +static ssize_t +lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + return snprintf(buf, PAGE_SIZE, "0x%llx\n", + wwn_to_u64(phba->cfg_oas_vpt_wwpn)); +} + +/** + * lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled + * for Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * @count: Size of the data buffer. + * + * Returns: + * -EINVAL count is invalid, invalid wwpn byte invalid + * -EPERM oas is not supported by hba + * value of count on success + **/ +static ssize_t +lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + unsigned int cnt = count; + uint8_t wwpn[WWN_SZ]; + int rc; + + if (!phba->cfg_fof) + return -EPERM; + + /* count may include a LF at end of string */ + if (buf[cnt-1] == '\n') + cnt--; + + rc = lpfc_wwn_set(buf, cnt, wwpn); + if (rc) + return rc; + + memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); + memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); + if (wwn_to_u64(wwpn) == 0) + phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT; + else + phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT; + phba->cfg_oas_flags &= ~OAS_LUN_VALID; + phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; + return count; +} +static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR, + lpfc_oas_vpt_show, lpfc_oas_vpt_store); + +/** + * lpfc_oas_lun_state_show - Return the current state (enabled or disabled) + * of whether luns will be enabled or disabled + * for Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * Returns: + * size of formatted string. + **/ +static ssize_t +lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + return snprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state); +} + +/** + * lpfc_oas_lun_state_store - Store the state (enabled or disabled) + * of whether luns will be enabled or disabled + * for Optimized Access Storage (OAS) operations. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * @count: Size of the data buffer. + * + * Returns: + * -EINVAL count is invalid, invalid wwpn byte invalid + * -EPERM oas is not supported by hba + * value of count on success + **/ +static ssize_t +lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + int val = 0; + + if (!phba->cfg_fof) + return -EPERM; + + if (!isdigit(buf[0])) + return -EINVAL; + + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + if ((val != 0) && (val != 1)) + return -EINVAL; + + phba->cfg_oas_lun_state = val; + + return strlen(buf); +} +static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR, + lpfc_oas_lun_state_show, lpfc_oas_lun_state_store); + +/** + * lpfc_oas_lun_status_show - Return the status of the Optimized Access + * Storage (OAS) lun returned by the + * lpfc_oas_lun_show function. + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * Returns: + * size of formatted string. + **/ +static ssize_t +lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + if (!(phba->cfg_oas_flags & OAS_LUN_VALID)) + return -EFAULT; + + return snprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status); +} +static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO, + lpfc_oas_lun_status_show, NULL); + + +/** + * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage + * (OAS) operations. + * @phba: lpfc_hba pointer. + * @ndlp: pointer to fcp target node. + * @lun: the fc lun for setting oas state. + * @oas_state: the oas state to be set to the lun. + * + * Returns: + * SUCCESS : 0 + * -EPERM OAS is not enabled or not supported by this port. + * + */ +static size_t +lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[], + uint8_t tgt_wwpn[], uint64_t lun, uint32_t oas_state) +{ + + int rc = 0; + + if (!phba->cfg_fof) + return -EPERM; + + if (oas_state) { + if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, + (struct lpfc_name *)tgt_wwpn, lun)) + rc = -ENOMEM; + } else { + lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, + (struct lpfc_name *)tgt_wwpn, lun); + } + return rc; + +} + +/** + * lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized + * Access Storage (OAS) operations. + * @phba: lpfc_hba pointer. + * @vpt_wwpn: wwpn of the vport associated with the returned lun + * @tgt_wwpn: wwpn of the target associated with the returned lun + * @lun_status: status of the lun returned lun + * + * Returns the first or next lun enabled for OAS operations for the vport/target + * specified. If a lun is found, its vport wwpn, target wwpn and status is + * returned. If the lun is not found, NOT_OAS_ENABLED_LUN is returned. + * + * Return: + * lun that is OAS enabled for the vport/target + * NOT_OAS_ENABLED_LUN when no oas enabled lun found. + */ +static uint64_t +lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[], + uint8_t tgt_wwpn[], uint32_t *lun_status) +{ + uint64_t found_lun; + + if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn) + return NOT_OAS_ENABLED_LUN; + if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *) + phba->sli4_hba.oas_next_vpt_wwpn, + (struct lpfc_name *) + phba->sli4_hba.oas_next_tgt_wwpn, + &phba->sli4_hba.oas_next_lun, + (struct lpfc_name *)vpt_wwpn, + (struct lpfc_name *)tgt_wwpn, + &found_lun, lun_status)) + return found_lun; + else + return NOT_OAS_ENABLED_LUN; +} + +/** + * lpfc_oas_lun_state_change - enable/disable a lun for OAS operations + * @phba: lpfc_hba pointer. + * @vpt_wwpn: vport wwpn by reference. + * @tgt_wwpn: target wwpn by reference. + * @lun: the fc lun for setting oas state. + * @oas_state: the oas state to be set to the oas_lun. + * + * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE) + * a lun for OAS operations. + * + * Return: + * SUCCESS: 0 + * -ENOMEM: failed to enable an lun for OAS operations + * -EPERM: OAS is not enabled + */ +static ssize_t +lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[], + uint8_t tgt_wwpn[], uint64_t lun, + uint32_t oas_state) +{ + + int rc; + + rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun, + oas_state); + return rc; +} + +/** + * lpfc_oas_lun_show - Return oas enabled luns from a chosen target + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * This routine returns a lun enabled for OAS each time the function + * is called. + * + * Returns: + * SUCCESS: size of formatted string. + * -EFAULT: target or vport wwpn was not set properly. + * -EPERM: oas is not enabled. + **/ +static ssize_t +lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + uint64_t oas_lun; + int len = 0; + + if (!phba->cfg_fof) + return -EPERM; + + if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) + if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT)) + return -EFAULT; + + if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) + if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET)) + return -EFAULT; + + oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn, + phba->cfg_oas_tgt_wwpn, + &phba->cfg_oas_lun_status); + if (oas_lun != NOT_OAS_ENABLED_LUN) + phba->cfg_oas_flags |= OAS_LUN_VALID; + + len += snprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun); + + return len; +} + +/** + * lpfc_oas_lun_store - Sets the OAS state for lun + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: buffer for passing information. + * + * This function sets the OAS state for lun. Before this function is called, + * the vport wwpn, target wwpn, and oas state need to be set. + * + * Returns: + * SUCCESS: size of formatted string. + * -EFAULT: target or vport wwpn was not set properly. + * -EPERM: oas is not enabled. + * size of formatted string. + **/ +static ssize_t +lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + uint64_t scsi_lun; + ssize_t rc; + + if (!phba->cfg_fof) + return -EPERM; + + if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) + return -EFAULT; + + if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) + return -EFAULT; + + if (!isdigit(buf[0])) + return -EINVAL; + + if (sscanf(buf, "0x%llx", &scsi_lun) != 1) + return -EINVAL; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3372 Try to set vport 0x%llx target 0x%llx lun:%lld " + "with oas set to %d\n", + wwn_to_u64(phba->cfg_oas_vpt_wwpn), + wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun, + phba->cfg_oas_lun_state); + + rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn, + phba->cfg_oas_tgt_wwpn, scsi_lun, + phba->cfg_oas_lun_state); + + if (rc) + return rc; + + return count; +} +static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR, + lpfc_oas_lun_show, lpfc_oas_lun_store); static int lpfc_poll = 0; -module_param(lpfc_poll, int, 0); +module_param(lpfc_poll, int, S_IRUGO); MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:" " 0 - none," " 1 - poll with interrupts enabled" @@ -1964,24 +2766,33 @@ static DEVICE_ATTR(lpfc_poll, S_IRUGO | S_IWUSR, lpfc_poll_show, lpfc_poll_store); int lpfc_sli_mode = 0; -module_param(lpfc_sli_mode, int, 0); +module_param(lpfc_sli_mode, int, S_IRUGO); MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:" " 0 - auto (SLI-3 if supported)," " 2 - select SLI-2 even on SLI-3 capable HBAs," " 3 - select SLI-3"); int lpfc_enable_npiv = 1; -module_param(lpfc_enable_npiv, int, 0); +module_param(lpfc_enable_npiv, int, S_IRUGO); MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality"); lpfc_param_show(enable_npiv); lpfc_param_init(enable_npiv, 1, 0, 1); static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL); -int lpfc_enable_rrq; -module_param(lpfc_enable_rrq, int, 0); +LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2, + "FCF Fast failover=1 Priority failover=2"); + +int lpfc_enable_rrq = 2; +module_param(lpfc_enable_rrq, int, S_IRUGO); MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality"); lpfc_param_show(enable_rrq); -lpfc_param_init(enable_rrq, 0, 0, 1); +/* +# lpfc_enable_rrq: Track XRI/OXID reuse after IO failures +# 0x0 = disabled, XRI/OXID use not tracked. +# 0x1 = XRI/OXID reuse is timed with ratov, RRQ sent. +# 0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent. +*/ +lpfc_param_init(enable_rrq, 2, 0, 2); static DEVICE_ATTR(lpfc_enable_rrq, S_IRUGO, lpfc_enable_rrq_show, NULL); /* @@ -2040,7 +2851,7 @@ static DEVICE_ATTR(txcmplq_hw, S_IRUGO, lpfc_txcmplq_hw_show, NULL); int lpfc_iocb_cnt = 2; -module_param(lpfc_iocb_cnt, int, 1); +module_param(lpfc_iocb_cnt, int, S_IRUGO); MODULE_PARM_DESC(lpfc_iocb_cnt, "Number of IOCBs alloc for ELS, CT, and ABTS: 1k to 5k IOCBs"); lpfc_param_show(iocb_cnt); @@ -2192,7 +3003,7 @@ static DEVICE_ATTR(lpfc_nodev_tmo, S_IRUGO | S_IWUSR, # disappear until the timer expires. Value range is [0,255]. Default # value is 30. */ -module_param(lpfc_devloss_tmo, int, 0); +module_param(lpfc_devloss_tmo, int, S_IRUGO); MODULE_PARM_DESC(lpfc_devloss_tmo, "Seconds driver will hold I/O waiting " "for a device to come back"); @@ -2250,14 +3061,17 @@ LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff, # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters # objects that have been registered with the nameserver after login. */ -LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1, +LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, "Deregister nameserver objects before LOGO"); /* # lun_queue_depth: This parameter is used to limit the number of outstanding -# commands per FCP LUN. Value range is [1,128]. Default value is 30. +# commands per FCP LUN. Value range is [1,512]. Default value is 30. +# If this parameter value is greater than 1/8th the maximum number of exchanges +# supported by the HBA port, then the lun queue depth will be reduced to +# 1/8th the maximum number of exchanges. */ -LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, +LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512, "Max number of FCP commands we can queue to a specific LUN"); /* @@ -2265,7 +3079,7 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, # commands per target port. Value range is [10,65535]. Default value is 65535. */ LPFC_VPORT_ATTR_R(tgt_queue_depth, 65535, 10, 65535, - "Max number of FCP commands we can queue to a specific target port"); + "Max number of FCP commands we can queue to a specific target port"); /* # hba_queue_depth: This parameter is used to limit the number of outstanding @@ -2302,7 +3116,7 @@ LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1, # Default value of this parameter is 1. */ static int lpfc_restrict_login = 1; -module_param(lpfc_restrict_login, int, 0); +module_param(lpfc_restrict_login, int, S_IRUGO); MODULE_PARM_DESC(lpfc_restrict_login, "Restrict virtual ports login to remote initiators."); lpfc_vport_param_show(restrict_login); @@ -2456,9 +3270,22 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G && + val == 4) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3113 Loop mode not supported at speed %d\n", + phba->cfg_link_speed); + phba->cfg_topology = prev_val; + return -EINVAL; + } if (nolip) return strlen(buf); + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3054 lpfc_topology changed from %d to %d\n", + prev_val, val); + if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4) + phba->fc_topology_changed = 1; err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); if (err) { phba->cfg_topology = prev_val; @@ -2473,7 +3300,7 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, return -EINVAL; } static int lpfc_topology = 0; -module_param(lpfc_topology, int, 0); +module_param(lpfc_topology, int, S_IRUGO); MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); lpfc_param_show(topology) lpfc_param_init(topology, 0, 0, 6) @@ -2882,6 +3709,10 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, if (sscanf(val_buf, "%i", &val) != 1) return -EINVAL; + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "3055 lpfc_link_speed changed from %d to %d %s\n", + phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)"); + if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || @@ -2894,6 +3725,14 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, val); return -EINVAL; } + if (val == LPFC_USER_LINK_SPEED_16G && + phba->fc_topology == LPFC_TOPOLOGY_LOOP) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3112 lpfc_link_speed attribute cannot be set " + "to %d. Speed is not supported in loop mode.\n", + val); + return -EINVAL; + } if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; @@ -2915,7 +3754,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, } static int lpfc_link_speed = 0; -module_param(lpfc_link_speed, int, 0); +module_param(lpfc_link_speed, int, S_IRUGO); MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) @@ -2938,6 +3777,13 @@ lpfc_param_show(link_speed) static int lpfc_link_speed_init(struct lpfc_hba *phba, int val) { + if (val == LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3111 lpfc_link_speed of %d cannot " + "support loop mode, setting topology to default.\n", + val); + phba->cfg_topology = 0; + } if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) && (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) { phba->cfg_link_speed = val; @@ -2966,7 +3812,7 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing enable or disable aer flag. * @count: unused variable. * * Description: @@ -3043,14 +3889,14 @@ lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, } static int lpfc_aer_support = 1; -module_param(lpfc_aer_support, int, 1); +module_param(lpfc_aer_support, int, S_IRUGO); MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support"); lpfc_param_show(aer_support) /** * lpfc_aer_support_init - Set the initial adapters aer support flag * @phba: lpfc_hba pointer. - * @val: link speed value. + * @val: enable aer or disable aer flag. * * Description: * If val is in a valid range [0,1], then set the adapter's initial @@ -3089,7 +3935,7 @@ static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR, * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing flag 1 for aer cleanup state. * @count: unused variable. * * Description: @@ -3132,6 +3978,456 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, lpfc_aer_cleanup_state); +/** + * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string the number of vfs to be enabled. + * @count: unused variable. + * + * Description: + * When this api is called either through user sysfs, the driver shall + * try to enable or disable SR-IOV virtual functions according to the + * following: + * + * If zero virtual function has been enabled to the physical function, + * the driver shall invoke the pci enable virtual function api trying + * to enable the virtual functions. If the nr_vfn provided is greater + * than the maximum supported, the maximum virtual function number will + * be used for invoking the api; otherwise, the nr_vfn provided shall + * be used for invoking the api. If the api call returned success, the + * actual number of virtual functions enabled will be set to the driver + * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver + * cfg_sriov_nr_virtfn remains zero. + * + * If none-zero virtual functions have already been enabled to the + * physical function, as reflected by the driver's cfg_sriov_nr_virtfn, + * -EINVAL will be returned and the driver does nothing; + * + * If the nr_vfn provided is zero and none-zero virtual functions have + * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the + * disabling virtual function api shall be invoded to disable all the + * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to + * zero. Otherwise, if zero virtual function has been enabled, do + * nothing. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct pci_dev *pdev = phba->pcidev; + int val = 0, rc = -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val < 0) + return -EINVAL; + + /* Request disabling virtual functions */ + if (val == 0) { + if (phba->cfg_sriov_nr_virtfn > 0) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + return strlen(buf); + } + + /* Request enabling virtual functions */ + if (phba->cfg_sriov_nr_virtfn > 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3018 There are %d virtual functions " + "enabled on physical function.\n", + phba->cfg_sriov_nr_virtfn); + return -EEXIST; + } + + if (val <= LPFC_MAX_VFN_PER_PFN) + phba->cfg_sriov_nr_virtfn = val; + else { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3019 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; + } + + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn); + if (rc) { + phba->cfg_sriov_nr_virtfn = 0; + rc = -EPERM; + } else + rc = strlen(buf); + + return rc; +} + +static int lpfc_sriov_nr_virtfn = LPFC_DEF_VFN_PER_PFN; +module_param(lpfc_sriov_nr_virtfn, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_sriov_nr_virtfn, "Enable PCIe device SR-IOV virtual fn"); +lpfc_param_show(sriov_nr_virtfn) + +/** + * lpfc_sriov_nr_virtfn_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0,255], then set the adapter's initial + * cfg_sriov_nr_virtfn field. If it's greater than the maximum, the maximum + * number shall be used instead. It will be up to the driver's probe_one + * routine to determine whether the device's SR-IOV is supported or not. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val) +{ + if (val >= 0 && val <= LPFC_MAX_VFN_PER_PFN) { + phba->cfg_sriov_nr_virtfn = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3017 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; +} +static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, + lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); + +/** + * lpfc_request_firmware_store - Request for Linux generic firmware upgrade + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string the number of vfs to be enabled. + * @count: unused variable. + * + * Description: + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_request_firmware_upgrade_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, rc = -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val != 1) + return -EINVAL; + + rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE); + if (rc) + rc = -EPERM; + else + rc = strlen(buf); + return rc; +} + +static int lpfc_req_fw_upgrade; +module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade"); +lpfc_param_show(request_firmware_upgrade) + +/** + * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade + * @phba: lpfc_hba pointer. + * @val: 0 or 1. + * + * Description: + * Set the initial Linux generic firmware upgrade enable or disable flag. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val) +{ + if (val >= 0 && val <= 1) { + phba->cfg_request_firmware_upgrade = val; + return 0; + } + return -EINVAL; +} +static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR, + lpfc_request_firmware_upgrade_show, + lpfc_request_firmware_upgrade_store); + +/** + * lpfc_fcp_imax_store + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: string with the number of fast-path FCP interrupts per second. + * @count: unused variable. + * + * Description: + * If val is in a valid range [636,651042], then set the adapter's + * maximum number of fast-path FCP interrupts per second. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, i; + + /* fcp_imax is only valid for SLI4 */ + if (phba->sli_rev != LPFC_SLI_REV4) + return -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + /* + * Value range for the HBA is [5000,5000000] + * The value for each EQ depends on how many EQs are configured. + */ + if (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX) + return -EINVAL; + + phba->cfg_fcp_imax = (uint32_t)val; + for (i = 0; i < phba->cfg_fcp_io_channel; i += LPFC_MAX_EQ_DELAY) + lpfc_modify_fcp_eq_delay(phba, i); + + return strlen(buf); +} + +/* +# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second +# for the HBA. +# +# Value range is [5,000 to 5,000,000]. Default value is 50,000. +*/ +static int lpfc_fcp_imax = LPFC_DEF_IMAX; +module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_fcp_imax, + "Set the maximum number of FCP interrupts per second per HBA"); +lpfc_param_show(fcp_imax) + +/** + * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [636,651042], then initialize the adapter's + * maximum number of fast-path FCP interrupts per second. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_fcp_imax_init(struct lpfc_hba *phba, int val) +{ + if (phba->sli_rev != LPFC_SLI_REV4) { + phba->cfg_fcp_imax = 0; + return 0; + } + + if (val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) { + phba->cfg_fcp_imax = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3016 fcp_imax: %d out of range, using default\n", val); + phba->cfg_fcp_imax = LPFC_DEF_IMAX; + + return 0; +} + +static DEVICE_ATTR(lpfc_fcp_imax, S_IRUGO | S_IWUSR, + lpfc_fcp_imax_show, lpfc_fcp_imax_store); + +/** + * lpfc_state_show - Display current driver CPU affinity + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains text describing the state of the link. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct lpfc_vector_map_info *cpup; + int len = 0; + + if ((phba->sli_rev != LPFC_SLI_REV4) || + (phba->intr_type != MSIX)) + return len; + + switch (phba->cfg_fcp_cpu_map) { + case 0: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: No mapping (%d)\n", + phba->cfg_fcp_cpu_map); + return len; + case 1: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: HBA centric mapping (%d): " + "%d online CPUs\n", + phba->cfg_fcp_cpu_map, + phba->sli4_hba.num_online_cpu); + break; + case 2: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: Driver centric mapping (%d): " + "%d online CPUs\n", + phba->cfg_fcp_cpu_map, + phba->sli4_hba.num_online_cpu); + break; + } + + while (phba->sli4_hba.curr_disp_cpu < phba->sli4_hba.num_present_cpu) { + cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu]; + + /* margin should fit in this and the truncated message */ + if (cpup->irq == LPFC_VECTOR_MAP_EMPTY) + len += snprintf(buf + len, PAGE_SIZE-len, + "CPU %02d io_chan %02d " + "physid %d coreid %d\n", + phba->sli4_hba.curr_disp_cpu, + cpup->channel_id, cpup->phys_id, + cpup->core_id); + else + len += snprintf(buf + len, PAGE_SIZE-len, + "CPU %02d io_chan %02d " + "physid %d coreid %d IRQ %d\n", + phba->sli4_hba.curr_disp_cpu, + cpup->channel_id, cpup->phys_id, + cpup->core_id, cpup->irq); + + phba->sli4_hba.curr_disp_cpu++; + + /* display max number of CPUs keeping some margin */ + if (phba->sli4_hba.curr_disp_cpu < + phba->sli4_hba.num_present_cpu && + (len >= (PAGE_SIZE - 64))) { + len += snprintf(buf + len, PAGE_SIZE-len, "more...\n"); + break; + } + } + + if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_present_cpu) + phba->sli4_hba.curr_disp_cpu = 0; + + return len; +} + +/** + * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: one or more lpfc_polling_flags values. + * @count: not used. + * + * Returns: + * -EINVAL - Not implemented yet. + **/ +static ssize_t +lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int status = -EINVAL; + return status; +} + +/* +# lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors +# for the HBA. +# +# Value range is [0 to 2]. Default value is LPFC_DRIVER_CPU_MAP (2). +# 0 - Do not affinitze IRQ vectors +# 1 - Affintize HBA vectors with respect to each HBA +# (start with CPU0 for each HBA) +# 2 - Affintize HBA vectors with respect to the entire driver +# (round robin thru all CPUs across all HBAs) +*/ +static int lpfc_fcp_cpu_map = LPFC_DRIVER_CPU_MAP; +module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_fcp_cpu_map, + "Defines how to map CPUs to IRQ vectors per HBA"); + +/** + * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0-2], then affinitze the adapter's + * MSIX vectors. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val) +{ + if (phba->sli_rev != LPFC_SLI_REV4) { + phba->cfg_fcp_cpu_map = 0; + return 0; + } + + if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) { + phba->cfg_fcp_cpu_map = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3326 fcp_cpu_map: %d out of range, using default\n", + val); + phba->cfg_fcp_cpu_map = LPFC_DRIVER_CPU_MAP; + + return 0; +} + +static DEVICE_ATTR(lpfc_fcp_cpu_map, S_IRUGO | S_IWUSR, + lpfc_fcp_cpu_map_show, lpfc_fcp_cpu_map_store); + /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. @@ -3147,6 +4443,14 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1, "Use ADISC on rediscovery to authenticate FCP devices"); /* +# lpfc_first_burst_size: First burst size to use on the NPorts +# that support first burst. +# Value range is [0,65536]. Default value is 0. +*/ +LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536, + "First burst size for Targets that support first burst"); + +/* # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue # depth. Default value is 0. When the value of this parameter is zero the # SCSI command completion time is not used for controlling I/O queue depth. When @@ -3155,7 +4459,7 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1, # The value is set in milliseconds. */ static int lpfc_max_scsicmpl_time; -module_param(lpfc_max_scsicmpl_time, int, 0); +module_param(lpfc_max_scsicmpl_time, int, S_IRUGO); MODULE_PARM_DESC(lpfc_max_scsicmpl_time, "Use command completion time to control queue depth"); lpfc_vport_param_show(max_scsicmpl_time); @@ -3195,6 +4499,29 @@ static DEVICE_ATTR(lpfc_max_scsicmpl_time, S_IRUGO | S_IWUSR, LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support"); /* +# lpfc_fcp_io_sched: Determine scheduling algrithmn for issuing FCP cmds +# range is [0,1]. Default value is 0. +# For [0], FCP commands are issued to Work Queues ina round robin fashion. +# For [1], FCP commands are issued to a Work Queue associated with the +# current CPU. +# It would be set to 1 by the driver if it's able to set up cpu affinity +# for FCP I/Os through Work Queue associated with the current CPU. Otherwise, +# roundrobin scheduling of FCP I/Os through WQs will be used. +*/ +LPFC_ATTR_RW(fcp_io_sched, 0, 0, 1, "Determine scheduling algorithm for " + "issuing commands [0] - Round Robin, [1] - Current CPU"); + +/* +# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior +# range is [0,1]. Default value is 0. +# For [0], bus reset issues target reset to ALL devices +# For [1], bus reset issues target reset to non-FCP2 devices +*/ +LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for " + "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset"); + + +/* # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing # cr_delay (msec) or cr_count outstanding commands. cr_delay can take # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay @@ -3248,11 +4575,28 @@ LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands " "during discovery"); /* -# lpfc_max_luns: maximum allowed LUN. +# lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that +# will be scanned by the SCSI midlayer when sequential scanning is +# used; and is also the highest LUN ID allowed when the SCSI midlayer +# parses REPORT_LUN responses. The lpfc driver has no LUN count or +# LUN ID limit, but the SCSI midlayer requires this field for the uses +# above. The lpfc driver limits the default value to 255 for two reasons. +# As it bounds the sequential scan loop, scanning for thousands of luns +# on a target can take minutes of wall clock time. Additionally, +# there are FC targets, such as JBODs, that only recognize 8-bits of +# LUN ID. When they receive a value greater than 8 bits, they chop off +# the high order bits. In other words, they see LUN IDs 0, 256, 512, +# and so on all as LUN ID 0. This causes the linux kernel, which sees +# valid responses at each of the LUN IDs, to believe there are multiple +# devices present, when in fact, there is only 1. +# A customer that is aware of their target behaviors, and the results as +# indicated above, is welcome to increase the lpfc_max_luns value. +# As mentioned, this value is not used by the lpfc driver, only the +# SCSI midlayer. # Value range is [0,65535]. Default value is 255. # NOTE: The SCSI layer might probe all allowed LUN on some old targets. */ -LPFC_VPORT_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN"); +LPFC_VPORT_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID"); /* # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. @@ -3262,6 +4606,12 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255, "Milliseconds driver will wait between polling FCP ring"); /* +# lpfc_task_mgmt_tmo: Maximum time to wait for task management commands +# to complete in seconds. Value range is [5,180], default value is 60. +*/ +LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180, + "Maximum time to wait for task management commands to complete"); +/* # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that # support this feature # 0 = MSI disabled @@ -3273,28 +4623,13 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " "MSI-X (2), if possible"); /* -# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second -# -# Value range is [636,651042]. Default value is 10000. -*/ -LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST, - "Set the maximum number of fast-path FCP interrupts per second"); - -/* -# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues +# lpfc_fcp_io_channel: Set the number of FCP EQ/CQ/WQ IO channels # -# Value range is [1,31]. Default value is 4. +# Value range is [1,7]. Default value is 4. */ -LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX, - "Set the number of fast-path FCP work queues, if possible"); - -/* -# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues -# -# Value range is [1,7]. Default value is 1. -*/ -LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX, - "Set the number of fast-path FCP event queues, if possible"); +LPFC_ATTR_R(fcp_io_channel, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN, + LPFC_FCP_IO_CHAN_MAX, + "Set the number of FCP I/O channels"); /* # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware. @@ -3313,6 +4648,21 @@ LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver."); LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat."); /* +# lpfc_EnableXLane: Enable Express Lane Feature +# 0x0 Express Lane Feature disabled +# 0x1 Express Lane Feature enabled +# Value range is [0,1]. Default value is 0. +*/ +LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature."); + +/* +# lpfc_XLanePriority: Define CS_CTL priority for Express Lane Feature +# 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits) +# Value range is [0x0,0x7f]. Default value is 0 +*/ +LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature."); + +/* # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF) # 0 = BlockGuard disabled (default) # 1 = BlockGuard enabled @@ -3321,44 +4671,88 @@ LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat."); LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support"); /* +# lpfc_fcp_look_ahead: Look ahead for completions in FCP start routine +# 0 = disabled (default) +# 1 = enabled +# Value range is [0,1]. Default value is 0. +# +# This feature in under investigation and may be supported in the future. +*/ +unsigned int lpfc_fcp_look_ahead = LPFC_LOOK_AHEAD_OFF; + +/* # lpfc_prot_mask: i # - Bit mask of host protection capabilities used to register with the # SCSI mid-layer # - Only meaningful if BG is turned on (lpfc_enable_bg=1). # - Allows you to ultimately specify which profiles to use # - Default will result in registering capabilities for all profiles. +# - SHOST_DIF_TYPE1_PROTECTION 1 +# HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection +# - SHOST_DIX_TYPE0_PROTECTION 8 +# HBA supports DIX Type 0: Host to HBA protection only +# - SHOST_DIX_TYPE1_PROTECTION 16 +# HBA supports DIX Type 1: Host to HBA Type 1 protection # */ -unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION; +unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION | + SHOST_DIX_TYPE0_PROTECTION | + SHOST_DIX_TYPE1_PROTECTION; -module_param(lpfc_prot_mask, uint, 0); +module_param(lpfc_prot_mask, uint, S_IRUGO); MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask"); /* # lpfc_prot_guard: i # - Bit mask of protection guard types to register with the SCSI mid-layer -# - Guard types are currently either 1) IP checksum 2) T10-DIF CRC +# - Guard types are currently either 1) T10-DIF CRC 2) IP checksum # - Allows you to ultimately specify which profiles to use # - Default will result in registering capabilities for all guard types # */ unsigned char lpfc_prot_guard = SHOST_DIX_GUARD_IP; -module_param(lpfc_prot_guard, byte, 0); +module_param(lpfc_prot_guard, byte, S_IRUGO); MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type"); +/* + * Delay initial NPort discovery when Clean Address bit is cleared in + * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed. + * This parameter can have value 0 or 1. + * When this parameter is set to 0, no delay is added to the initial + * discovery. + * When this parameter is set to non-zero value, initial Nport discovery is + * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC + * accept and FCID/Fabric name/Fabric portname is changed. + * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion + * when Clean Address bit is cleared in FLOGI/FDISC + * accept and FCID/Fabric name/Fabric portname is changed. + * Default value is 0. + */ +int lpfc_delay_discovery; +module_param(lpfc_delay_discovery, int, S_IRUGO); +MODULE_PARM_DESC(lpfc_delay_discovery, + "Delay NPort discovery when Clean Address bit is cleared. " + "Allowed values: 0,1."); /* * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count - * This value can be set to values between 64 and 256. The default value is + * This value can be set to values between 64 and 4096. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). + * Because of the additional overhead involved in setting up T10-DIF, + * this parameter will be limited to 128 if BlockGuard is enabled under SLI4 + * and will be limited to 512 if BlockGuard is enabled under SLI3. */ LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count"); -LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_PROT_SG_SEG_CNT, - LPFC_DEFAULT_PROT_SG_SEG_CNT, LPFC_MAX_PROT_SG_SEG_CNT, - "Max Protection Scatter Gather Segment Count"); +/* + * This parameter will be depricated, the driver cannot limit the + * protection data s/g list. + */ +LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, + LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, + "Max Protection Scatter Gather Segment Count"); struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_bg_info, @@ -3389,10 +4783,13 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_devloss_tmo, &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, + &dev_attr_lpfc_first_burst_size, &dev_attr_lpfc_ack0, &dev_attr_lpfc_topology, &dev_attr_lpfc_scan_down, &dev_attr_lpfc_link_speed, + &dev_attr_lpfc_fcp_io_sched, + &dev_attr_lpfc_fcp2_no_tgt_reset, &dev_attr_lpfc_cr_delay, &dev_attr_lpfc_cr_count, &dev_attr_lpfc_multi_ring_support, @@ -3401,6 +4798,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_fdmi_on, &dev_attr_lpfc_max_luns, &dev_attr_lpfc_enable_npiv, + &dev_attr_lpfc_fcf_failover_policy, &dev_attr_lpfc_enable_rrq, &dev_attr_nport_evt_cnt, &dev_attr_board_mode, @@ -3414,22 +4812,32 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_issue_reset, &dev_attr_lpfc_poll, &dev_attr_lpfc_poll_tmo, + &dev_attr_lpfc_task_mgmt_tmo, &dev_attr_lpfc_use_msi, &dev_attr_lpfc_fcp_imax, - &dev_attr_lpfc_fcp_wq_count, - &dev_attr_lpfc_fcp_eq_count, + &dev_attr_lpfc_fcp_cpu_map, + &dev_attr_lpfc_fcp_io_channel, &dev_attr_lpfc_enable_bg, &dev_attr_lpfc_soft_wwnn, &dev_attr_lpfc_soft_wwpn, &dev_attr_lpfc_soft_wwn_enable, &dev_attr_lpfc_enable_hba_reset, &dev_attr_lpfc_enable_hba_heartbeat, + &dev_attr_lpfc_EnableXLane, + &dev_attr_lpfc_XLanePriority, + &dev_attr_lpfc_xlane_lun, + &dev_attr_lpfc_xlane_tgt, + &dev_attr_lpfc_xlane_vpt, + &dev_attr_lpfc_xlane_lun_state, + &dev_attr_lpfc_xlane_lun_status, &dev_attr_lpfc_sg_seg_cnt, &dev_attr_lpfc_max_scsicmpl_time, &dev_attr_lpfc_stat_data_ctrl, &dev_attr_lpfc_prot_sg_seg_cnt, &dev_attr_lpfc_aer_support, &dev_attr_lpfc_aer_state_cleanup, + &dev_attr_lpfc_sriov_nr_virtfn, + &dev_attr_lpfc_req_fw_upgrade, &dev_attr_lpfc_suppress_link_up, &dev_attr_lpfc_iocb_cnt, &dev_attr_iocb_hw, @@ -3437,6 +4845,10 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_txcmplq_hw, &dev_attr_lpfc_fips_level, &dev_attr_lpfc_fips_rev, + &dev_attr_lpfc_dss, + &dev_attr_lpfc_sriov_hw_max_virtfn, + &dev_attr_protocol, + &dev_attr_lpfc_xlane_supported, NULL, }; @@ -3455,6 +4867,7 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_lpfc_restrict_login, &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, + &dev_attr_lpfc_first_burst_size, &dev_attr_lpfc_fdmi_on, &dev_attr_lpfc_max_luns, &dev_attr_nport_evt_cnt, @@ -3504,18 +4917,23 @@ sysfs_ctlreg_write(struct file *filp, struct kobject *kobj, if ((off + count) > FF_REG_AREA_SIZE) return -ERANGE; - if (count == 0) return 0; + if (count <= LPFC_REG_WRITE_KEY_SIZE) + return 0; if (off % 4 || count % 4 || (unsigned long)buf % 4) return -EINVAL; - if (!(vport->fc_flag & FC_OFFLINE_MODE)) { + /* This is to protect HBA registers from accidental writes. */ + if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE)) + return -EINVAL; + + if (!(vport->fc_flag & FC_OFFLINE_MODE)) return -EPERM; - } spin_lock_irq(&phba->hbalock); - for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) - writel(*((uint32_t *)(buf + buf_off)), + for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE; + buf_off += sizeof(uint32_t)) + writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)), phba->ctrl_regs_memmap_p + off + buf_off); spin_unlock_irq(&phba->hbalock); @@ -3590,23 +5008,6 @@ static struct bin_attribute sysfs_ctlreg_attr = { }; /** - * sysfs_mbox_idle - frees the sysfs mailbox - * @phba: lpfc_hba pointer - **/ -static void -sysfs_mbox_idle(struct lpfc_hba *phba) -{ - phba->sysfs_mbox.state = SMBOX_IDLE; - phba->sysfs_mbox.offset = 0; - - if (phba->sysfs_mbox.mbox) { - mempool_free(phba->sysfs_mbox.mbox, - phba->mbox_mem_pool); - phba->sysfs_mbox.mbox = NULL; - } -} - -/** * sysfs_mbox_write - Write method for writing information via mbox * @filp: open sysfs file * @kobj: kernel kobject that contains the kernel class device. @@ -3616,71 +5017,18 @@ sysfs_mbox_idle(struct lpfc_hba *phba) * @count: bytes to transfer. * * Description: - * Accessed via /sys/class/scsi_host/hostxxx/mbox. - * Uses the sysfs mbox to send buf contents to the adapter. + * Deprecated function. All mailbox access from user space is performed via the + * bsg interface. * * Returns: - * -ERANGE off and count combo out of range - * -EINVAL off, count or buff address invalid - * zero if count is zero - * -EPERM adapter is offline - * -ENOMEM failed to allocate memory for the mail box - * -EAGAIN offset, state or mbox is NULL - * count number of bytes transferred + * -EPERM operation not permitted **/ static ssize_t sysfs_mbox_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct device *dev = container_of(kobj, struct device, kobj); - struct Scsi_Host *shost = class_to_shost(dev); - struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; - struct lpfc_hba *phba = vport->phba; - struct lpfcMboxq *mbox = NULL; - - if ((count + off) > MAILBOX_CMD_SIZE) - return -ERANGE; - - if (off % 4 || count % 4 || (unsigned long)buf % 4) - return -EINVAL; - - if (count == 0) - return 0; - - if (off == 0) { - mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) - return -ENOMEM; - memset(mbox, 0, sizeof (LPFC_MBOXQ_t)); - } - - spin_lock_irq(&phba->hbalock); - - if (off == 0) { - if (phba->sysfs_mbox.mbox) - mempool_free(mbox, phba->mbox_mem_pool); - else - phba->sysfs_mbox.mbox = mbox; - phba->sysfs_mbox.state = SMBOX_WRITING; - } else { - if (phba->sysfs_mbox.state != SMBOX_WRITING || - phba->sysfs_mbox.offset != off || - phba->sysfs_mbox.mbox == NULL) { - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EAGAIN; - } - } - - memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off, - buf, count); - - phba->sysfs_mbox.offset = off + count; - - spin_unlock_irq(&phba->hbalock); - - return count; + return -EPERM; } /** @@ -3693,199 +5041,18 @@ sysfs_mbox_write(struct file *filp, struct kobject *kobj, * @count: bytes to transfer. * * Description: - * Accessed via /sys/class/scsi_host/hostxxx/mbox. - * Uses the sysfs mbox to receive data from to the adapter. + * Deprecated function. All mailbox access from user space is performed via the + * bsg interface. * * Returns: - * -ERANGE off greater than mailbox command size - * -EINVAL off, count or buff address invalid - * zero if off and count are zero - * -EACCES adapter over temp - * -EPERM garbage can value to catch a multitude of errors - * -EAGAIN management IO not permitted, state or off error - * -ETIME mailbox timeout - * -ENODEV mailbox error - * count number of bytes transferred + * -EPERM operation not permitted **/ static ssize_t sysfs_mbox_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct device *dev = container_of(kobj, struct device, kobj); - struct Scsi_Host *shost = class_to_shost(dev); - struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; - struct lpfc_hba *phba = vport->phba; - int rc; - MAILBOX_t *pmb; - - if (off > MAILBOX_CMD_SIZE) - return -ERANGE; - - if ((count + off) > MAILBOX_CMD_SIZE) - count = MAILBOX_CMD_SIZE - off; - - if (off % 4 || count % 4 || (unsigned long)buf % 4) - return -EINVAL; - - if (off && count == 0) - return 0; - - spin_lock_irq(&phba->hbalock); - - if (phba->over_temp_state == HBA_OVER_TEMP) { - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EACCES; - } - - if (off == 0 && - phba->sysfs_mbox.state == SMBOX_WRITING && - phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) { - pmb = &phba->sysfs_mbox.mbox->u.mb; - switch (pmb->mbxCommand) { - /* Offline only */ - case MBX_INIT_LINK: - case MBX_DOWN_LINK: - case MBX_CONFIG_LINK: - case MBX_CONFIG_RING: - case MBX_RESET_RING: - case MBX_UNREG_LOGIN: - case MBX_CLEAR_LA: - case MBX_DUMP_CONTEXT: - case MBX_RUN_DIAGS: - case MBX_RESTART: - case MBX_SET_MASK: - case MBX_SET_DEBUG: - if (!(vport->fc_flag & FC_OFFLINE_MODE)) { - printk(KERN_WARNING "mbox_read:Command 0x%x " - "is illegal in on-line state\n", - pmb->mbxCommand); - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - } - case MBX_WRITE_NV: - case MBX_WRITE_VPARMS: - case MBX_LOAD_SM: - case MBX_READ_NV: - case MBX_READ_CONFIG: - case MBX_READ_RCONFIG: - case MBX_READ_STATUS: - case MBX_READ_XRI: - case MBX_READ_REV: - case MBX_READ_LNK_STAT: - case MBX_DUMP_MEMORY: - case MBX_DOWN_LOAD: - case MBX_UPDATE_CFG: - case MBX_KILL_BOARD: - case MBX_LOAD_AREA: - case MBX_LOAD_EXP_ROM: - case MBX_BEACON: - case MBX_DEL_LD_ENTRY: - case MBX_SET_VARIABLE: - case MBX_WRITE_WWN: - case MBX_PORT_CAPABILITIES: - case MBX_PORT_IOV_CONTROL: - break; - case MBX_SECURITY_MGMT: - case MBX_AUTH_PORT: - if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { - printk(KERN_WARNING "mbox_read:Command 0x%x " - "is not permitted\n", pmb->mbxCommand); - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - } - break; - case MBX_READ_SPARM64: - case MBX_READ_TOPOLOGY: - case MBX_REG_LOGIN: - case MBX_REG_LOGIN64: - case MBX_CONFIG_PORT: - case MBX_RUN_BIU_DIAG: - printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n", - pmb->mbxCommand); - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - default: - printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n", - pmb->mbxCommand); - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EPERM; - } - - /* If HBA encountered an error attention, allow only DUMP - * or RESTART mailbox commands until the HBA is restarted. - */ - if (phba->pport->stopped && - pmb->mbxCommand != MBX_DUMP_MEMORY && - pmb->mbxCommand != MBX_RESTART && - pmb->mbxCommand != MBX_WRITE_VPARMS && - pmb->mbxCommand != MBX_WRITE_WWN) - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, - "1259 mbox: Issued mailbox cmd " - "0x%x while in stopped state.\n", - pmb->mbxCommand); - - phba->sysfs_mbox.mbox->vport = vport; - - /* Don't allow mailbox commands to be sent when blocked - * or when in the middle of discovery - */ - if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EAGAIN; - } - - if ((vport->fc_flag & FC_OFFLINE_MODE) || - (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) { - - spin_unlock_irq(&phba->hbalock); - rc = lpfc_sli_issue_mbox (phba, - phba->sysfs_mbox.mbox, - MBX_POLL); - spin_lock_irq(&phba->hbalock); - - } else { - spin_unlock_irq(&phba->hbalock); - rc = lpfc_sli_issue_mbox_wait (phba, - phba->sysfs_mbox.mbox, - lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ); - spin_lock_irq(&phba->hbalock); - } - - if (rc != MBX_SUCCESS) { - if (rc == MBX_TIMEOUT) { - phba->sysfs_mbox.mbox = NULL; - } - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; - } - phba->sysfs_mbox.state = SMBOX_READING; - } - else if (phba->sysfs_mbox.offset != off || - phba->sysfs_mbox.state != SMBOX_READING) { - printk(KERN_WARNING "mbox_read: Bad State\n"); - sysfs_mbox_idle(phba); - spin_unlock_irq(&phba->hbalock); - return -EAGAIN; - } - - memcpy(buf, (uint8_t *) &pmb + off, count); - - phba->sysfs_mbox.offset = off + count; - - if (phba->sysfs_mbox.offset == MAILBOX_CMD_SIZE) - sysfs_mbox_idle(phba); - - spin_unlock_irq(&phba->hbalock); - - return count; + return -EPERM; } static struct bin_attribute sysfs_mbox_attr = { @@ -3893,7 +5060,7 @@ static struct bin_attribute sysfs_mbox_attr = { .name = "mbox", .mode = S_IRUSR | S_IWUSR, }, - .size = MAILBOX_CMD_SIZE, + .size = MAILBOX_SYSFS_MAX, .read = sysfs_mbox_read, .write = sysfs_mbox_write, }; @@ -4029,8 +5196,13 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) case LPFC_LINK_UP: case LPFC_CLEAR_LA: case LPFC_HBA_READY: - /* Links up, beyond this port_type reports state */ - fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; + /* Links up, reports port state accordingly */ + if (vport->port_state < LPFC_VPORT_READY) + fc_host_port_state(shost) = + FC_PORTSTATE_BYPASSED; + else + fc_host_port_state(shost) = + FC_PORTSTATE_ONLINE; break; case LPFC_HBA_ERROR: fc_host_port_state(shost) = FC_PORTSTATE_ERROR; @@ -4099,9 +5271,10 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) spin_lock_irq(shost->host_lock); - if ((vport->fc_flag & FC_FABRIC) || - ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && - (vport->fc_flag & FC_PUBLIC_LOOP))) + if ((vport->port_state > LPFC_FLOGI) && + ((vport->fc_flag & FC_FABRIC) || + ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && + (vport->fc_flag & FC_PUBLIC_LOOP)))) node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn); else /* fabric is local port if there is no F/FL_Port */ @@ -4174,9 +5347,17 @@ lpfc_get_stats(struct Scsi_Host *shost) memset(hs, 0, sizeof (struct fc_host_statistics)); hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt; - hs->tx_words = (pmb->un.varRdStatus.xmitByteCnt * 256); + /* + * The MBX_READ_STATUS returns tx_k_bytes which has to + * converted to words + */ + hs->tx_words = (uint64_t) + ((uint64_t)pmb->un.varRdStatus.xmitByteCnt + * (uint64_t)256); hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt; - hs->rx_words = (pmb->un.varRdStatus.rcvByteCnt * 256); + hs->rx_words = (uint64_t) + ((uint64_t)pmb->un.varRdStatus.rcvByteCnt + * (uint64_t)256); memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); pmb->mbxCommand = MBX_READ_LNK_STAT; @@ -4447,7 +5628,7 @@ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) * Description: * This function is called by the transport after the @fc_vport's symbolic name * has been changed. This function re-registers the symbolic name with the - * switch to propogate the change into the fabric if the vport is active. + * switch to propagate the change into the fabric if the vport is active. **/ static void lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) @@ -4464,7 +5645,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) * * This function is called by the lpfc_get_cfgparam() routine to set the * module lpfc_log_verbose into the @phba cfg_log_verbose for use with - * log messsage according to the module's lpfc_log_verbose parameter setting + * log message according to the module's lpfc_log_verbose parameter setting * before hba port or vport created. **/ static void @@ -4608,6 +5789,8 @@ struct fc_function_template lpfc_vport_transport_functions = { void lpfc_get_cfgparam(struct lpfc_hba *phba) { + lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched); + lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset); lpfc_cr_delay_init(phba, lpfc_cr_delay); lpfc_cr_count_init(phba, lpfc_cr_count); lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support); @@ -4617,19 +5800,30 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_topology_init(phba, lpfc_topology); lpfc_link_speed_init(phba, lpfc_link_speed); lpfc_poll_tmo_init(phba, lpfc_poll_tmo); + lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo); lpfc_enable_npiv_init(phba, lpfc_enable_npiv); + lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy); lpfc_enable_rrq_init(phba, lpfc_enable_rrq); lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); - lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count); - lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count); + lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); + lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel); lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); + lpfc_EnableXLane_init(phba, lpfc_EnableXLane); + if (phba->sli_rev != LPFC_SLI_REV4) + phba->cfg_EnableXLane = 0; + lpfc_XLanePriority_init(phba, lpfc_XLanePriority); + memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t))); + memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t))); + phba->cfg_oas_lun_state = 0; + phba->cfg_oas_lun_status = 0; + phba->cfg_oas_flags = 0; lpfc_enable_bg_init(phba, lpfc_enable_bg); if (phba->sli_rev == LPFC_SLI_REV4) phba->cfg_poll = 0; else - phba->cfg_poll = lpfc_poll; + phba->cfg_poll = lpfc_poll; phba->cfg_soft_wwnn = 0L; phba->cfg_soft_wwpn = 0L; lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); @@ -4637,8 +5831,11 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); lpfc_aer_support_init(phba, lpfc_aer_support); + lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); + lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade); lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt); + phba->cfg_enable_dss = 1; return; } @@ -4658,6 +5855,7 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_restrict_login_init(vport, lpfc_restrict_login); lpfc_fcp_class_init(vport, lpfc_fcp_class); lpfc_use_adisc_init(vport, lpfc_use_adisc); + lpfc_first_burst_size_init(vport, lpfc_first_burst_size); lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); lpfc_fdmi_on_init(vport, lpfc_fdmi_on); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); |