diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 29 |
1 files changed, 23 insertions, 6 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 93f222d6671..434e9037908 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -73,8 +73,6 @@ struct lpfc_sli2_slim; */ /* 1 Second */ #define QUEUE_RAMP_DOWN_INTERVAL (msecs_to_jiffies(1000 * 1)) -/* 5 minutes */ -#define QUEUE_RAMP_UP_INTERVAL (msecs_to_jiffies(1000 * 300)) /* Number of exchanges reserved for discovery to complete */ #define LPFC_DISC_IOCB_BUFF_COUNT 20 @@ -421,6 +419,7 @@ struct lpfc_vport { uint32_t cfg_enable_da_id; uint32_t cfg_max_scsicmpl_time; uint32_t cfg_tgt_queue_depth; + uint32_t cfg_first_burst_size; uint32_t dev_loss_tmo_changed; @@ -641,6 +640,7 @@ struct lpfc_hba { #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */ #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */ #define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */ +#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/ struct lpfc_dmabuf slim2p; @@ -707,11 +707,10 @@ struct lpfc_hba { uint32_t cfg_multi_ring_type; uint32_t cfg_poll; uint32_t cfg_poll_tmo; + uint32_t cfg_task_mgmt_tmo; uint32_t cfg_use_msi; uint32_t cfg_fcp_imax; uint32_t cfg_fcp_cpu_map; - uint32_t cfg_fcp_wq_count; - uint32_t cfg_fcp_eq_count; uint32_t cfg_fcp_io_channel; uint32_t cfg_total_seg_cnt; uint32_t cfg_sg_seg_cnt; @@ -722,6 +721,20 @@ struct lpfc_hba { uint32_t cfg_hba_queue_depth; uint32_t cfg_enable_hba_reset; uint32_t cfg_enable_hba_heartbeat; + uint32_t cfg_fof; + uint32_t cfg_EnableXLane; + uint8_t cfg_oas_tgt_wwpn[8]; + uint8_t cfg_oas_vpt_wwpn[8]; + uint32_t cfg_oas_lun_state; +#define OAS_LUN_ENABLE 1 +#define OAS_LUN_DISABLE 0 + uint32_t cfg_oas_lun_status; +#define OAS_LUN_STATUS_EXISTS 0x01 + uint32_t cfg_oas_flags; +#define OAS_FIND_ANY_VPORT 0x01 +#define OAS_FIND_ANY_TARGET 0x02 +#define OAS_LUN_VALID 0x04 + uint32_t cfg_XLanePriority; uint32_t cfg_enable_bg; uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; @@ -730,6 +743,7 @@ struct lpfc_hba { uint32_t cfg_request_firmware_upgrade; uint32_t cfg_iocb_cnt; uint32_t cfg_suppress_link_up; + uint32_t cfg_rrq_xri_bitmap_sz; #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */ #define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */ #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */ @@ -835,6 +849,7 @@ struct lpfc_hba { mempool_t *mbox_mem_pool; mempool_t *nlp_mem_pool; mempool_t *rrq_pool; + mempool_t *active_rrq_pool; struct fc_host_statistics link_stats; enum intr_type_t intr_type; @@ -869,7 +884,6 @@ struct lpfc_hba { atomic_t num_cmd_success; unsigned long last_rsrc_error_time; unsigned long last_ramp_down_time; - unsigned long last_ramp_up_time; #ifdef CONFIG_SCSI_LPFC_DEBUG_FS struct dentry *hba_debugfs_root; atomic_t debugfs_vport_count; @@ -971,6 +985,9 @@ struct lpfc_hba { atomic_t sdev_cnt; uint8_t fips_spec_rev; uint8_t fips_level; + spinlock_t devicelock; /* lock for luns list */ + mempool_t *device_data_mem_pool; + struct list_head luns; }; static inline struct Scsi_Host * |