diff options
Diffstat (limited to 'drivers/scsi/isci/request.c')
| -rw-r--r-- | drivers/scsi/isci/request.c | 3528 |
1 files changed, 3528 insertions, 0 deletions
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c new file mode 100644 index 00000000000..56e38096f0c --- /dev/null +++ b/drivers/scsi/isci/request.c @@ -0,0 +1,3528 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <scsi/scsi_cmnd.h> +#include "isci.h" +#include "task.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "sas.h" + +#undef C +#define C(a) (#a) +const char *req_state_name(enum sci_base_request_states state) +{ + static const char * const strings[] = REQUEST_STATES; + + return strings[state]; +} +#undef C + +static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq, + int idx) +{ + if (idx == 0) + return &ireq->tc->sgl_pair_ab; + else if (idx == 1) + return &ireq->tc->sgl_pair_cd; + else if (idx < 0) + return NULL; + else + return &ireq->sg_table[idx - 2]; +} + +static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost, + struct isci_request *ireq, u32 idx) +{ + u32 offset; + + if (idx == 0) { + offset = (void *) &ireq->tc->sgl_pair_ab - + (void *) &ihost->task_context_table[0]; + return ihost->tc_dma + offset; + } else if (idx == 1) { + offset = (void *) &ireq->tc->sgl_pair_cd - + (void *) &ihost->task_context_table[0]; + return ihost->tc_dma + offset; + } + + return sci_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); +} + +static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) +{ + e->length = sg_dma_len(sg); + e->address_upper = upper_32_bits(sg_dma_address(sg)); + e->address_lower = lower_32_bits(sg_dma_address(sg)); + e->address_modifier = 0; +} + +static void sci_request_build_sgl(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->isci_host; + struct sas_task *task = isci_request_access_task(ireq); + struct scatterlist *sg = NULL; + dma_addr_t dma_addr; + u32 sg_idx = 0; + struct scu_sgl_element_pair *scu_sg = NULL; + struct scu_sgl_element_pair *prev_sg = NULL; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (sg) { + scu_sg = to_sgl_element_pair(ireq, sg_idx); + init_sgl_element(&scu_sg->A, sg); + sg = sg_next(sg); + if (sg) { + init_sgl_element(&scu_sg->B, sg); + sg = sg_next(sg); + } else + memset(&scu_sg->B, 0, sizeof(scu_sg->B)); + + if (prev_sg) { + dma_addr = to_sgl_element_pair_dma(ihost, + ireq, + sg_idx); + + prev_sg->next_pair_upper = + upper_32_bits(dma_addr); + prev_sg->next_pair_lower = + lower_32_bits(dma_addr); + } + + prev_sg = scu_sg; + sg_idx++; + } + } else { /* handle when no sg */ + scu_sg = to_sgl_element_pair(ireq, sg_idx); + + dma_addr = dma_map_single(&ihost->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir); + + ireq->zero_scatter_daddr = dma_addr; + + scu_sg->A.length = task->total_xfer_len; + scu_sg->A.address_upper = upper_32_bits(dma_addr); + scu_sg->A.address_lower = lower_32_bits(dma_addr); + } + + if (scu_sg) { + scu_sg->next_pair_upper = 0; + scu_sg->next_pair_lower = 0; + } +} + +static void sci_io_request_build_ssp_command_iu(struct isci_request *ireq) +{ + struct ssp_cmd_iu *cmd_iu; + struct sas_task *task = isci_request_access_task(ireq); + + cmd_iu = &ireq->ssp.cmd; + + memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); + cmd_iu->add_cdb_len = 0; + cmd_iu->_r_a = 0; + cmd_iu->_r_b = 0; + cmd_iu->en_fburst = 0; /* unsupported */ + cmd_iu->task_prio = task->ssp_task.task_prio; + cmd_iu->task_attr = task->ssp_task.task_attr; + cmd_iu->_r_c = 0; + + sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cmd->cmnd, + (task->ssp_task.cmd->cmd_len+3) / sizeof(u32)); +} + +static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq) +{ + struct ssp_task_iu *task_iu; + struct sas_task *task = isci_request_access_task(ireq); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + task_iu = &ireq->ssp.tmf; + + memset(task_iu, 0, sizeof(struct ssp_task_iu)); + + memcpy(task_iu->LUN, task->ssp_task.LUN, 8); + + task_iu->task_func = isci_tmf->tmf_code; + task_iu->task_tag = + (test_bit(IREQ_TMF, &ireq->flags)) ? + isci_tmf->io_tag : + SCI_CONTROLLER_INVALID_IO_TAG; +} + +/** + * This method is will fill in the SCU Task Context for any type of SSP request. + * @sci_req: + * @task_context: + * + */ +static void scu_ssp_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + /* task_context->type.ssp.tag = ireq->io_tag; */ + task_context->task_phase = 0x01; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + + /* + * Copy the physical address for the command buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* + * Copy the physical address for the response buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); + + task_context->response_iu_upper = upper_32_bits(dma_addr); + task_context->response_iu_lower = lower_32_bits(dma_addr); +} + +static u8 scu_bg_blk_size(struct scsi_device *sdp) +{ + switch (sdp->sector_size) { + case 512: + return 0; + case 1024: + return 1; + case 4096: + return 3; + default: + return 0xff; + } +} + +static u32 scu_dif_bytes(u32 len, u32 sector_size) +{ + return (len >> ilog2(sector_size)) * 8; +} + +static void scu_ssp_ireq_dif_insert(struct isci_request *ireq, u8 type, u8 op) +{ + struct scu_task_context *tc = ireq->tc; + struct scsi_cmnd *scmd = ireq->ttype_ptr.io_task_ptr->uldd_task; + u8 blk_sz = scu_bg_blk_size(scmd->device); + + tc->block_guard_enable = 1; + tc->blk_prot_en = 1; + tc->blk_sz = blk_sz; + /* DIF write insert */ + tc->blk_prot_func = 0x2; + + tc->transfer_length_bytes += scu_dif_bytes(tc->transfer_length_bytes, + scmd->device->sector_size); + + /* always init to 0, used by hw */ + tc->interm_crc_val = 0; + + tc->init_crc_seed = 0; + tc->app_tag_verify = 0; + tc->app_tag_gen = 0; + tc->ref_tag_seed_verify = 0; + + /* always init to same as bg_blk_sz */ + tc->UD_bytes_immed_val = scmd->device->sector_size; + + tc->reserved_DC_0 = 0; + + /* always init to 8 */ + tc->DIF_bytes_immed_val = 8; + + tc->reserved_DC_1 = 0; + tc->bgc_blk_sz = scmd->device->sector_size; + tc->reserved_E0_0 = 0; + tc->app_tag_gen_mask = 0; + + /** setup block guard control **/ + tc->bgctl = 0; + + /* DIF write insert */ + tc->bgctl_f.op = 0x2; + + tc->app_tag_verify_mask = 0; + + /* must init to 0 for hw */ + tc->blk_guard_err = 0; + + tc->reserved_E8_0 = 0; + + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) + tc->ref_tag_seed_gen = scsi_get_lba(scmd) & 0xffffffff; + else if (type & SCSI_PROT_DIF_TYPE3) + tc->ref_tag_seed_gen = 0; +} + +static void scu_ssp_ireq_dif_strip(struct isci_request *ireq, u8 type, u8 op) +{ + struct scu_task_context *tc = ireq->tc; + struct scsi_cmnd *scmd = ireq->ttype_ptr.io_task_ptr->uldd_task; + u8 blk_sz = scu_bg_blk_size(scmd->device); + + tc->block_guard_enable = 1; + tc->blk_prot_en = 1; + tc->blk_sz = blk_sz; + /* DIF read strip */ + tc->blk_prot_func = 0x1; + + tc->transfer_length_bytes += scu_dif_bytes(tc->transfer_length_bytes, + scmd->device->sector_size); + + /* always init to 0, used by hw */ + tc->interm_crc_val = 0; + + tc->init_crc_seed = 0; + tc->app_tag_verify = 0; + tc->app_tag_gen = 0; + + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) + tc->ref_tag_seed_verify = scsi_get_lba(scmd) & 0xffffffff; + else if (type & SCSI_PROT_DIF_TYPE3) + tc->ref_tag_seed_verify = 0; + + /* always init to same as bg_blk_sz */ + tc->UD_bytes_immed_val = scmd->device->sector_size; + + tc->reserved_DC_0 = 0; + + /* always init to 8 */ + tc->DIF_bytes_immed_val = 8; + + tc->reserved_DC_1 = 0; + tc->bgc_blk_sz = scmd->device->sector_size; + tc->reserved_E0_0 = 0; + tc->app_tag_gen_mask = 0; + + /** setup block guard control **/ + tc->bgctl = 0; + + /* DIF read strip */ + tc->bgctl_f.crc_verify = 1; + tc->bgctl_f.op = 0x1; + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) { + tc->bgctl_f.ref_tag_chk = 1; + tc->bgctl_f.app_f_detect = 1; + } else if (type & SCSI_PROT_DIF_TYPE3) + tc->bgctl_f.app_ref_f_detect = 1; + + tc->app_tag_verify_mask = 0; + + /* must init to 0 for hw */ + tc->blk_guard_err = 0; + + tc->reserved_E8_0 = 0; + tc->ref_tag_seed_gen = 0; +} + +/** + * This method is will fill in the SCU Task Context for a SSP IO request. + * @sci_req: + * + */ +static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, + enum dma_data_direction dir, + u32 len) +{ + struct scu_task_context *task_context = ireq->tc; + struct sas_task *sas_task = ireq->ttype_ptr.io_task_ptr; + struct scsi_cmnd *scmd = sas_task->uldd_task; + u8 prot_type = scsi_get_prot_type(scmd); + u8 prot_op = scsi_get_prot_op(scmd); + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->ssp_command_iu_length = + sizeof(struct ssp_cmd_iu) / sizeof(u32); + task_context->type.ssp.frame_type = SSP_COMMAND; + + switch (dir) { + case DMA_FROM_DEVICE: + case DMA_NONE: + default: + task_context->task_type = SCU_TASK_TYPE_IOREAD; + break; + case DMA_TO_DEVICE: + task_context->task_type = SCU_TASK_TYPE_IOWRITE; + break; + } + + task_context->transfer_length_bytes = len; + + if (task_context->transfer_length_bytes > 0) + sci_request_build_sgl(ireq); + + if (prot_type != SCSI_PROT_DIF_TYPE0) { + if (prot_op == SCSI_PROT_READ_STRIP) + scu_ssp_ireq_dif_strip(ireq, prot_type, prot_op); + else if (prot_op == SCSI_PROT_WRITE_INSERT) + scu_ssp_ireq_dif_insert(ireq, prot_type, prot_op); + } +} + +/** + * This method will fill in the SCU Task Context for a SSP Task request. The + * following important settings are utilized: -# priority == + * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued + * ahead of other task destined for the same Remote Node. -# task_type == + * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a task frame. + * @sci_req: This parameter specifies the task request object being + * constructed. + * + */ +static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 1; + task_context->priority = SCU_TASK_PRIORITY_HIGH; + task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; + task_context->transfer_length_bytes = 0; + task_context->type.ssp.frame_type = SSP_TASK; + task_context->ssp_command_iu_length = + sizeof(struct ssp_task_iu) / sizeof(u32); +} + +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @sci_req: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = sci_io_request_get_dma_addr(ireq, + ((char *) &ireq->stp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_sata_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = FIS_REGH2D; + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); +} + +static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq, + bool copy_rx_frame) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + + scu_stp_raw_request_construct_task_context(ireq); + + stp_req->status = 0; + stp_req->sgl.offset = 0; + stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; + + if (copy_rx_frame) { + sci_request_build_sgl(ireq); + stp_req->sgl.index = 0; + } else { + /* The user does not want the data copied to the SGL buffer location */ + stp_req->sgl.index = -1; + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. + */ +static void sci_stp_optimized_request_construct(struct isci_request *ireq, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) +{ + struct scu_task_context *task_context = ireq->tc; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(ireq, task_context); + + /* Copy over the SGL elements */ + sci_request_build_sgl(ireq); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = len; + + if (dir == DMA_TO_DEVICE) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + +static void sci_atapi_construct(struct isci_request *ireq) +{ + struct host_to_dev_fis *h2d_fis = &ireq->stp.cmd; + struct sas_task *task; + + /* To simplify the implementation we take advantage of the + * silicon's partial acceleration of atapi protocol (dma data + * transfers), so we promote all commands to dma protocol. This + * breaks compatibility with ATA_HORKAGE_ATAPI_MOD16_DMA drives. + */ + h2d_fis->features |= ATAPI_PKT_DMA; + + scu_stp_raw_request_construct_task_context(ireq); + + task = isci_request_access_task(ireq); + if (task->data_dir == DMA_NONE) + task->total_xfer_len = 0; + + /* clear the response so we can detect arrivial of an + * unsolicited h2d fis + */ + ireq->stp.rsp.fis_type = 0; +} + +static enum sci_status +sci_io_request_construct_sata(struct isci_request *ireq, + u32 len, + enum dma_data_direction dir, + bool copy) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(ireq); + struct domain_device *dev = ireq->target_device->domain_dev; + + /* check for management protocols */ + if (test_bit(IREQ_TMF, &ireq->flags)) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); + + return SCI_FAILURE; + } + + if (!sas_protocol_ata(task->task_proto)) { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Non-ATA protocol in SATA path: 0x%x\n", + __func__, + task->task_proto); + return SCI_FAILURE; + + } + + /* ATAPI */ + if (dev->sata_dev.command_set == ATAPI_COMMAND_SET && + task->ata_task.fis.command == ATA_CMD_PACKET) { + sci_atapi_construct(ireq); + return SCI_SUCCESS; + } + + /* non data */ + if (task->data_dir == DMA_NONE) { + scu_stp_raw_request_construct_task_context(ireq); + return SCI_SUCCESS; + } + + /* NCQ */ + if (task->ata_task.use_ncq) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); + return SCI_SUCCESS; + } + + /* DMA */ + if (task->ata_task.dma_xfer) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_DMA_IN, + len, dir); + return SCI_SUCCESS; + } else /* PIO */ + return sci_stp_pio_request_construct(ireq, copy); + + return status; +} + +static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SAS_PROTOCOL_SSP; + + scu_ssp_io_request_construct_task_context(ireq, + task->data_dir, + task->total_xfer_len); + + sci_io_request_build_ssp_command_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +enum sci_status sci_task_request_construct_ssp( + struct isci_request *ireq) +{ + /* Construct the SSP Task SCU Task Context */ + scu_ssp_task_request_construct_task_context(ireq); + + /* Fill in the SSP Task IU */ + sci_task_request_build_ssp_task_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *ireq) +{ + enum sci_status status; + bool copy = false; + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SAS_PROTOCOL_STP; + + copy = (task->data_dir == DMA_NONE) ? false : true; + + status = sci_io_request_construct_sata(ireq, + task->total_xfer_len, + task->data_dir, + copy); + + if (status == SCI_SUCCESS) + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return status; +} + +/** + * sci_req_tx_bytes - bytes transferred when reply underruns request + * @ireq: request that was terminated early + */ +#define SCU_TASK_CONTEXT_SRAM 0x200000 +static u32 sci_req_tx_bytes(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->owning_controller; + u32 ret_val = 0; + + if (readl(&ihost->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = ihost->scu_registers; + + /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where + * BAR1 is the scu_registers + * 0x20002C = 0x200000 + 0x2c + * = start of task context SRAM + offset of (type.ssp.data_offset) + * TCi is the io_tag of struct sci_request + */ + ret_val = readl(scu_reg_base + + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(ireq->io_tag))); + } + + return ret_val; +} + +enum sci_status sci_request_start(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct scu_task_context *tc = ireq->tc; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (state != SCI_REQ_CONSTRUCTED) { + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + tc->task_index = ISCI_TAG_TCI(ireq->io_tag); + + switch (tc->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + tc->type.ssp.tag = ireq->io_tag; + tc->type.ssp.target_port_transfer_tag = 0xFFFF; + break; + + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* STP/SATA Frame + * tc->type.stp.ncq_tag = ireq->ncq_tag; + */ + break; + + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; + + default: + /* This should never happen since we build the IO + * requests */ + break; + } + + /* Add to the post_context the io tag value */ + ireq->post_context |= ISCI_TAG_TCI(ireq->io_tag); + + /* Everything is good go ahead and change state */ + sci_change_state(&ireq->sm, SCI_REQ_STARTED); + + return SCI_SUCCESS; +} + +enum sci_status +sci_io_request_terminate(struct isci_request *ireq) +{ + enum sci_base_request_states state; + + state = ireq->sm.current_state_id; + + switch (state) { + case SCI_REQ_CONSTRUCTED: + /* Set to make sure no HW terminate posting is done: */ + set_bit(IREQ_TC_ABORT_POSTED, &ireq->flags); + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_STARTED: + case SCI_REQ_TASK_WAIT_TC_COMP: + case SCI_REQ_SMP_WAIT_RESP: + case SCI_REQ_SMP_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_D2H: + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + case SCI_REQ_STP_NON_DATA_WAIT_D2H: + case SCI_REQ_STP_PIO_WAIT_H2D: + case SCI_REQ_STP_PIO_WAIT_FRAME: + case SCI_REQ_STP_PIO_DATA_IN: + case SCI_REQ_STP_PIO_DATA_OUT: + case SCI_REQ_ATAPI_WAIT_H2D: + case SCI_REQ_ATAPI_WAIT_PIO_SETUP: + case SCI_REQ_ATAPI_WAIT_D2H: + case SCI_REQ_ATAPI_WAIT_TC_COMP: + /* Fall through and change state to ABORTING... */ + case SCI_REQ_TASK_WAIT_TC_RESP: + /* The task frame was already confirmed to have been + * sent by the SCU HW. Since the state machine is + * now only waiting for the task response itself, + * abort the request and complete it immediately + * and don't wait for the task response. + */ + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + /* Fall through and handle like ABORTING... */ + case SCI_REQ_ABORTING: + if (!isci_remote_device_is_safe_to_abort(ireq->target_device)) + set_bit(IREQ_PENDING_ABORT, &ireq->flags); + else + clear_bit(IREQ_PENDING_ABORT, &ireq->flags); + /* If the request is only waiting on the remote device + * suspension, return SUCCESS so the caller will wait too. + */ + return SCI_SUCCESS; + case SCI_REQ_COMPLETED: + default: + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", __func__, ireq->sm.current_state_id); + break; + } + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status sci_request_complete(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (WARN_ONCE(state != SCI_REQ_COMPLETED, + "isci: request completion from wrong state (%s)\n", + req_state_name(state))) + return SCI_FAILURE_INVALID_STATE; + + if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) + sci_controller_release_frame(ihost, + ireq->saved_rx_frame_index); + + /* XXX can we just stop the machine and remove the 'final' state? */ + sci_change_state(&ireq->sm, SCI_REQ_FINAL); + return SCI_SUCCESS; +} + +enum sci_status sci_io_request_event_handler(struct isci_request *ireq, + u32 event_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + if (state != SCI_REQ_STP_PIO_DATA_IN) { + dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %s\n", + __func__, event_code, req_state_name(state)); + + return SCI_FAILURE_INVALID_STATE; + } + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + return SCI_SUCCESS; + default: + dev_err(&ihost->pdev->dev, + "%s: pio request unexpected event %#x\n", + __func__, event_code); + + /* TODO Should we fail the PIO request when we get an + * unexpected event? + */ + return SCI_FAILURE; + } +} + +/* + * This function copies response data for requests returning response data + * instead of sense data. + * @sci_req: This parameter specifies the request object for which to copy + * the response data. + */ +static void sci_io_request_copy_response(struct isci_request *ireq) +{ + void *resp_buf; + u32 len; + struct ssp_response_iu *ssp_response; + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + ssp_response = &ireq->ssp.rsp; + + resp_buf = &isci_tmf->resp.resp_iu; + + len = min_t(u32, + SSP_RESP_IU_MAX_SIZE, + be32_to_cpu(ssp_response->response_data_len)); + + memcpy(resp_buf, ssp_response->resp_data, len); +} + +static enum sci_status +request_started_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + struct ssp_response_iu *resp_iu; + u8 datapres; + + /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000 + * to determine SDMA status + */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { + /* There are times when the SCU hardware will return an early + * response because the io request specified more data than is + * returned by the target device (mode pages, inquiry data, + * etc.). We must check the response stats to see if this is + * truly a failed request or a good request that just got + * completed early. + */ + struct ssp_response_iu *resp = &ireq->ssp.rsp; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + if (resp->status == 0) { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY; + } else { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } + break; + } + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): { + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + } + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): + /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame + * guaranteed to be received before this completion status is + * posted? + */ + resp_iu = &ireq->ssp.rsp; + datapres = resp_iu->datapres; + + if (datapres == 1 || datapres == 2) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + break; + /* only stp device gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): + if (ireq->protocol == SAS_PROTOCOL_STP) { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + } else { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } + break; + + /* both stp/ssp device gets suspended */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + break; + + /* neither ssp nor stp gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): + default: + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + break; + } + + /* + * TODO: This is probably wrong for ACK/NAK timeout conditions + */ + + /* In all cases we will treat this as the completion of the IO req. */ + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; +} + +static enum sci_status +request_aborting_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? + */ + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* Currently, the decision is to simply allow the task request + * to timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if + * we decide to send the task IU again. + */ + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", __func__, ireq, + completion_code); + + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_response_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* In the AWAIT RESPONSE state, any TC completion is + * unexpected. but if the TC has success status, we + * complete the IO anyway. + */ + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* These status has been seen in a specific LSI + * expander, which sometimes is not able to send smp + * response within 2 ms. This causes our hardware break + * the connection and set TC completion with one of + * these SMP_XXX_XX_ERR status. For these type of error, + * we ask ihost user to retry the request. + */ + ireq->scu_status = SCU_TASK_DONE_SMP_RESP_TO_ERR; + ireq->sci_status = SCI_FAILURE_RETRY_REQUIRED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) +{ + struct scu_sgl_element *sgl; + struct scu_sgl_element_pair *sgl_pair; + struct isci_request *ireq = to_ireq(stp_req); + struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl; + + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + if (!sgl_pair) + sgl = NULL; + else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) { + if (sgl_pair->B.address_lower == 0 && + sgl_pair->B.address_upper == 0) { + sgl = NULL; + } else { + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_B; + sgl = &sgl_pair->B; + } + } else { + if (sgl_pair->next_pair_lower == 0 && + sgl_pair->next_pair_upper == 0) { + sgl = NULL; + } else { + pio_sgl->index++; + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A; + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + sgl = &sgl_pair->A; + } + } + + return sgl; +} + +static enum sci_status +stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/* transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + */ +static enum sci_status sci_stp_request_pio_data_out_trasmit_data_frame( + struct isci_request *ireq, + u32 length) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_task_context *task_context = ireq->tc; + struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *current_sgl; + + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &sgl_pair->A; + else + current_sgl = &sgl_pair->B; + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = FIS_DATA; + + /* send the new TC out. */ + return sci_controller_continue_io(ireq); +} + +static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_sgl_element_pair *sgl_pair; + enum sci_status status = SCI_SUCCESS; + struct scu_sgl_element *sgl; + u32 offset; + u32 len = 0; + + offset = stp_req->sgl.offset; + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) + return SCI_FAILURE; + + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) { + sgl = &sgl_pair->A; + len = sgl_pair->A.length - offset; + } else { + sgl = &sgl_pair->B; + len = sgl_pair->B.length - offset; + } + + if (stp_req->pio_len == 0) + return SCI_SUCCESS; + + if (stp_req->pio_len >= len) { + status = sci_stp_request_pio_data_out_trasmit_data_frame(ireq, len); + if (status != SCI_SUCCESS) + return status; + stp_req->pio_len -= len; + + /* update the current sgl, offset and save for future */ + sgl = pio_sgl_next(stp_req); + offset = 0; + } else if (stp_req->pio_len < len) { + sci_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); + + /* Sgl offset will be adjusted and saved for future */ + offset += stp_req->pio_len; + sgl->address_lower += stp_req->pio_len; + stp_req->pio_len = 0; + } + + stp_req->sgl.offset = offset; + + return status; +} + +/** + * + * @stp_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status +sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, + u8 *data_buf, u32 len) +{ + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + ireq = to_ireq(stp_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); + } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status sci_stp_request_pio_data_in_copy_data( + struct isci_stp_request *stp_req, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) { + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, stp_req->pio_len); + + if (status == SCI_SUCCESS) + stp_req->pio_len = 0; + } else { + /* We are transfering the whole frame so copy */ + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + stp_req->pio_len -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +static enum sci_status +stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status +pio_data_out_tx_done_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct isci_stp_request *stp_req = &ireq->stp.req; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->pio_len != 0) { + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status == SCI_SUCCESS) { + if (stp_req->pio_len == 0) + all_frames_transferred = true; + } + } else if (stp_req->pio_len == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCI_REQ_STP_PIO_DATA_IN + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + } + + sci_controller_release_frame(ihost, frame_index); + + return status; +} + +static enum sci_status process_unsolicited_fis(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + enum sci_status status; + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) + return status; + + if (frame_header->fis_type != FIS_REGD2H) { + dev_err(&ireq->isci_host->pdev->dev, + "%s ERROR: invalid fis type 0x%X\n", + __func__, frame_header->fis_type); + return SCI_FAILURE; + } + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + (u32 *)frame_header, + frame_buffer); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; +} + +static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct sas_task *task = isci_request_access_task(ireq); + enum sci_status status; + + status = process_unsolicited_fis(ireq, frame_index); + + if (status == SCI_SUCCESS) { + if (ireq->stp.rsp.status & ATA_ERR) + status = SCI_IO_FAILURE_RESPONSE_VALID; + } else { + status = SCI_IO_FAILURE_RESPONSE_VALID; + } + + if (status != SCI_SUCCESS) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = status; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + + /* the d2h ufi is the end of non-data commands */ + if (task->data_dir == DMA_NONE) + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + return status; +} + +static void scu_atapi_reconstruct_raw_frame_task_context(struct isci_request *ireq) +{ + struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev); + void *atapi_cdb = ireq->ttype_ptr.io_task_ptr->ata_task.atapi_packet; + struct scu_task_context *task_context = ireq->tc; + + /* fill in the SCU Task Context for a DATA fis containing CDB in Raw Frame + * type. The TC for previous Packet fis was already there, we only need to + * change the H2D fis content. + */ + memset(&ireq->stp.cmd, 0, sizeof(struct host_to_dev_fis)); + memcpy(((u8 *)&ireq->stp.cmd + sizeof(u32)), atapi_cdb, ATAPI_CDB_LEN); + memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); + task_context->type.stp.fis_type = FIS_DATA; + task_context->transfer_length_bytes = dev->cdb_len; +} + +static void scu_atapi_construct_task_context(struct isci_request *ireq) +{ + struct ata_device *dev = sas_to_ata_dev(ireq->target_device->domain_dev); + struct sas_task *task = isci_request_access_task(ireq); + struct scu_task_context *task_context = ireq->tc; + int cdb_len = dev->cdb_len; + + /* reference: SSTL 1.13.4.2 + * task_type, sata_direction + */ + if (task->data_dir == DMA_TO_DEVICE) { + task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT; + task_context->sata_direction = 0; + } else { + /* todo: for NO_DATA command, we need to send out raw frame. */ + task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN; + task_context->sata_direction = 1; + } + + memset(&task_context->type.stp, 0, sizeof(task_context->type.stp)); + task_context->type.stp.fis_type = FIS_DATA; + + memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); + memcpy(&ireq->stp.cmd.lbal, task->ata_task.atapi_packet, cdb_len); + task_context->ssp_command_iu_length = cdb_len / sizeof(u32); + + /* task phase is set to TX_CMD */ + task_context->task_phase = 0x1; + + /* retry counter */ + task_context->stp_retry_count = 0; + + /* data transfer size. */ + task_context->transfer_length_bytes = task->total_xfer_len; + + /* setup sgl */ + sci_request_build_sgl(ireq); +} + +enum sci_status +sci_io_request_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct isci_stp_request *stp_req = &ireq->stp.req; + enum sci_base_request_states state; + enum sci_status status; + ssize_t word_cnt; + + state = ireq->sm.current_state_id; + switch (state) { + case SCI_REQ_STARTED: { + struct ssp_frame_hdr ssp_hdr; + void *frame_header; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { + struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&resp_iu); + + sci_swab32_cpy(&ireq->ssp.rsp, resp_iu, word_cnt); + + resp_iu = &ireq->ssp.rsp; + + if (resp_iu->datapres == 0x01 || + resp_iu->datapres == 0x02) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + } else { + /* not a response frame, why did it get forwarded? */ + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", __func__, ireq, + frame_index, ssp_hdr.frame_type); + } + + /* + * In any case we are done with this frame buffer return it to + * the controller + */ + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_io_request_copy_response(ireq); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + case SCI_REQ_SMP_WAIT_RESP: { + struct sas_task *task = isci_request_access_task(ireq); + struct scatterlist *sg = &task->smp_task.smp_resp; + void *frame_header, *kaddr; + u8 *rsp; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + kaddr = kmap_atomic(sg_page(sg)); + rsp = kaddr + sg->offset; + sci_swab32_cpy(rsp, frame_header, 1); + + if (rsp[0] == SMP_RESPONSE) { + void *smp_resp; + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + &smp_resp); + + word_cnt = (sg->length/4)-1; + if (word_cnt > 0) + word_cnt = min_t(unsigned int, word_cnt, + SCU_UNSOLICITED_FRAME_BUFFER_SIZE/4); + sci_swab32_cpy(rsp + 4, smp_resp, word_cnt); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); + } else { + /* + * This was not a response frame why did it get + * forwarded? + */ + dev_err(&ihost->pdev->dev, + "%s: SCIC SMP Request 0x%p received unexpected " + "frame %d type 0x%02x\n", + __func__, + ireq, + frame_index, + rsp[0]); + + ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } + kunmap_atomic(kaddr); + + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return sci_stp_request_udma_general_frame_handler(ireq, + frame_index); + + case SCI_REQ_STP_UDMA_WAIT_D2H: + /* Use the general frame handler to copy the resposne data */ + status = sci_stp_request_udma_general_frame_handler(ireq, frame_index); + + if (status != SCI_SUCCESS) + return status; + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + + case SCI_REQ_STP_NON_DATA_WAIT_D2H: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; + break; + } + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_WAIT_FRAME: { + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware + * returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to + * back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->pio_len = frame_buffer[3] & 0xffff; + + /* status: 4th byte in the 3rd dword */ + stp_req->status = (frame_buffer[2] >> 24) & 0xff; + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + ireq->stp.rsp.status = stp_req->status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status != SCI_SUCCESS) + break; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT); + } + break; + + case FIS_SETDEVBITS: + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* + * Now why is the drive sending a D2H Register + * FIS when it is still busy? Do nothing since + * we are still in the right state. + */ + dev_dbg(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", + __func__, + stp_req, + frame_header->status); + break; + } + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_DATA_IN: { + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + return status; + } + + if (frame_header->fis_type != FIS_DATA) { + dev_err(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", + __func__, + stp_req, + frame_index, + frame_header->fis_type); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + return status; + } + + if (stp_req->sgl.index < 0) { + ireq->saved_rx_frame_index = frame_index; + stp_req->pio_len = 0; + } else { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + status = sci_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || stp_req->pio_len != 0) + return status; + + if ((stp_req->status & ATA_BUSY) == 0) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + return status; + } + + case SCI_REQ_ATAPI_WAIT_PIO_SETUP: { + struct sas_task *task = isci_request_access_task(ireq); + + sci_controller_release_frame(ihost, frame_index); + ireq->target_device->working_request = ireq; + if (task->data_dir == DMA_NONE) { + sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_TC_COMP); + scu_atapi_reconstruct_raw_frame_task_context(ireq); + } else { + sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H); + scu_atapi_construct_task_context(ireq); + } + + sci_controller_continue_io(ireq); + return SCI_SUCCESS; + } + case SCI_REQ_ATAPI_WAIT_D2H: + return atapi_d2h_reg_frame_handler(ireq, frame_index); + case SCI_REQ_ABORTING: + /* + * TODO: Is it even possible to get an unsolicited frame in the + * aborting state? + */ + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request given unexpected frame %x while " + "in state %d\n", + __func__, + frame_index, + state); + + sci_controller_release_frame(ihost, frame_index); + return SCI_FAILURE_INVALID_STATE; + } +} + +static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* We must check ther response buffer to see if the D2H + * Register FIS was received before we got the TC + * completion. + */ + if (ireq->stp.rsp.fis_type == FIS_REGD2H) { + sci_remote_device_suspend(ireq->target_device, + SCI_SW_SUSPEND_NORMAL); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + /* If we have an error completion status for the + * TC then we can expect a D2H register FIS from + * the device so we must change state to wait + * for it + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_UDMA_WAIT_D2H); + } + break; + + /* TODO Check to see if any of these completion status need to + * wait for the device to host register fis. + */ + /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR + * - this comes only for B0 + */ + default: + /* All other completion status cause the IO to be complete. */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status atapi_raw_completion(struct isci_request *ireq, u32 completion_code, + enum sci_base_request_states next) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, next); + break; + default: + /* All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ireq, + u32 completion_code) +{ + struct isci_remote_device *idev = ireq->target_device; + struct dev_to_host_fis *d2h = &ireq->stp.rsp; + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): { + u16 len = sci_req_tx_bytes(ireq); + + /* likely non-error data underrrun, workaround missing + * d2h frame from the controller + */ + if (d2h->fis_type != FIS_REGD2H) { + d2h->fis_type = FIS_REGD2H; + d2h->flags = (1 << 6); + d2h->status = 0x50; + d2h->error = 0; + d2h->lbal = 0; + d2h->byte_count_low = len & 0xff; + d2h->byte_count_high = len >> 8; + d2h->device = 0xa0; + d2h->lbal_exp = 0; + d2h->lbam_exp = 0; + d2h->lbah_exp = 0; + d2h->_r_a = 0; + d2h->sector_count = 0x3; + d2h->sector_count_exp = 0; + d2h->_r_b = 0; + d2h->_r_c = 0; + d2h->_r_d = 0; + } + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY; + status = ireq->sci_status; + + /* the hw will have suspended the rnc, so complete the + * request upon pending resume + */ + sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR); + break; + } + case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT): + /* In this case, there is no UF coming after. + * compelte the IO now. + */ + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + if (d2h->fis_type == FIS_REGD2H) { + /* UF received change the device state to ATAPI_ERROR */ + status = ireq->sci_status; + sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR); + } else { + /* If receiving any non-success TC status, no UF + * received yet, then an UF for the status fis + * is coming after (XXX: suspect this is + * actually a protocol error or a bug like the + * DONE_UNEXP_FIS case) + */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + + sci_change_state(&ireq->sm, SCI_REQ_ATAPI_WAIT_D2H); + } + break; + } + + return status; +} + +static int sci_request_smp_completion_status_is_tx_suspend( + unsigned int completion_status) +{ + switch (completion_status) { + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + return 1; + } + return 0; +} + +static int sci_request_smp_completion_status_is_tx_rx_suspend( + unsigned int completion_status) +{ + return 0; /* There are no Tx/Rx SMP suspend conditions. */ +} + +static int sci_request_ssp_completion_status_is_tx_suspend( + unsigned int completion_status) +{ + switch (completion_status) { + case SCU_TASK_DONE_TX_RAW_CMD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + return 1; + } + return 0; +} + +static int sci_request_ssp_completion_status_is_tx_rx_suspend( + unsigned int completion_status) +{ + return 0; /* There are no Tx/Rx SSP suspend conditions. */ +} + +static int sci_request_stpsata_completion_status_is_tx_suspend( + unsigned int completion_status) +{ + switch (completion_status) { + case SCU_TASK_DONE_TX_RAW_CMD_ERR: + case SCU_TASK_DONE_LL_R_ERR: + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + return 1; + } + return 0; +} + + +static int sci_request_stpsata_completion_status_is_tx_rx_suspend( + unsigned int completion_status) +{ + switch (completion_status) { + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_LL_SY_TERM: + case SCU_TASK_DONE_LL_LF_TERM: + case SCU_TASK_DONE_BREAK_RCVD: + case SCU_TASK_DONE_INV_FIS_LEN: + case SCU_TASK_DONE_UNEXP_FIS: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_MAX_PLD_ERR: + return 1; + } + return 0; +} + +static void sci_request_handle_suspending_completions( + struct isci_request *ireq, + u32 completion_code) +{ + int is_tx = 0; + int is_tx_rx = 0; + + switch (ireq->protocol) { + case SAS_PROTOCOL_SMP: + is_tx = sci_request_smp_completion_status_is_tx_suspend( + completion_code); + is_tx_rx = sci_request_smp_completion_status_is_tx_rx_suspend( + completion_code); + break; + case SAS_PROTOCOL_SSP: + is_tx = sci_request_ssp_completion_status_is_tx_suspend( + completion_code); + is_tx_rx = sci_request_ssp_completion_status_is_tx_rx_suspend( + completion_code); + break; + case SAS_PROTOCOL_STP: + is_tx = sci_request_stpsata_completion_status_is_tx_suspend( + completion_code); + is_tx_rx = + sci_request_stpsata_completion_status_is_tx_rx_suspend( + completion_code); + break; + default: + dev_warn(&ireq->isci_host->pdev->dev, + "%s: request %p has no valid protocol\n", + __func__, ireq); + break; + } + if (is_tx || is_tx_rx) { + BUG_ON(is_tx && is_tx_rx); + + sci_remote_node_context_suspend( + &ireq->target_device->rnc, + SCI_HW_SUSPEND, + (is_tx_rx) ? SCU_EVENT_TL_RNC_SUSPEND_TX_RX + : SCU_EVENT_TL_RNC_SUSPEND_TX); + } +} + +enum sci_status +sci_io_request_tc_completion(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + /* Decode those completions that signal upcoming suspension events. */ + sci_request_handle_suspending_completions( + ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code)); + + switch (state) { + case SCI_REQ_STARTED: + return request_started_state_tc_event(ireq, completion_code); + + case SCI_REQ_TASK_WAIT_TC_COMP: + return ssp_task_request_await_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_RESP: + return smp_request_await_response_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_TC_COMP: + return smp_request_await_tc_event(ireq, completion_code); + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return stp_request_udma_await_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + return stp_request_non_data_await_h2d_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_WAIT_H2D: + return stp_request_pio_await_h2d_completion_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_DATA_OUT: + return pio_data_out_tx_done_tc_event(ireq, completion_code); + + case SCI_REQ_ABORTING: + return request_aborting_state_tc_event(ireq, + completion_code); + + case SCI_REQ_ATAPI_WAIT_H2D: + return atapi_raw_completion(ireq, completion_code, + SCI_REQ_ATAPI_WAIT_PIO_SETUP); + + case SCI_REQ_ATAPI_WAIT_TC_COMP: + return atapi_raw_completion(ireq, completion_code, + SCI_REQ_ATAPI_WAIT_D2H); + + case SCI_REQ_ATAPI_WAIT_D2H: + return atapi_data_tc_completion_handler(ireq, completion_code); + + default: + dev_warn(&ihost->pdev->dev, "%s: %x in wrong state %s\n", + __func__, completion_code, req_state_name(state)); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * isci_request_process_response_iu() - This function sets the status and + * response iu, in the task struct, from the request object for the upper + * layer driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @resp_iu: This parameter points to the response iu of the completed request. + * @dev: This parameter specifies the linux device struct. + * + * none. + */ +static void isci_request_process_response_iu( + struct sas_task *task, + struct ssp_response_iu *resp_iu, + struct device *dev) +{ + dev_dbg(dev, + "%s: resp_iu = %p " + "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " + "resp_iu->response_data_len = %x, " + "resp_iu->sense_data_len = %x\nrepsonse data: ", + __func__, + resp_iu, + resp_iu->status, + resp_iu->datapres, + resp_iu->response_data_len, + resp_iu->sense_data_len); + + task->task_status.stat = resp_iu->status; + + /* libsas updates the task status fields based on the response iu. */ + sas_ssp_task_response(dev, task, resp_iu); +} + +/** + * isci_request_set_open_reject_status() - This function prepares the I/O + * completion for OPEN_REJECT conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @open_rej_reason: This parameter specifies the encoded reason for the + * abandon-class reject. + * + * none. + */ +static void isci_request_set_open_reject_status( + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum sas_open_rej_reason open_rej_reason) +{ + /* Task in the target is done. */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAS_OPEN_REJECT; + task->task_status.open_rej_reason = open_rej_reason; +} + +/** + * isci_request_handle_controller_specific_errors() - This function decodes + * controller-specific I/O completion error conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * + * none. + */ +static void isci_request_handle_controller_specific_errors( + struct isci_remote_device *idev, + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr) +{ + unsigned int cstatus; + + cstatus = request->scu_status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " + "- controller status = 0x%x\n", + __func__, request, cstatus); + + /* Decode the controller-specific errors; most + * important is to recognize those conditions in which + * the target may still have a task outstanding that + * must be aborted. + * + * Note that there are SCU completion codes being + * named in the decode below for which SCIC has already + * done work to handle them in a way other than as + * a controller-specific completion code; these are left + * in the decode below for completeness sake. + */ + switch (cstatus) { + case SCU_TASK_DONE_DMASETUP_DIRERR: + /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ + case SCU_TASK_DONE_XFERCNT_ERR: + /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + } else { + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAM_STAT_TASK_ABORTED; + + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + } + + break; + + case SCU_TASK_DONE_CRC_ERR: + case SCU_TASK_DONE_NAK_CMD_ERR: + case SCU_TASK_DONE_EXCESS_DATA: + case SCU_TASK_DONE_UNEXP_FIS: + /* Also SCU_TASK_DONE_UNEXP_RESP: */ + case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ + /* These are conditions in which the target + * has completed the task, so that no cleanup + * is necessary. + */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + + /* Note that the only open reject completion codes seen here will be + * abandon-class codes; all others are automatically retried in the SCU. + */ + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_WRONG_DEST); + break; + + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + + /* Note - the return of AB0 will change when + * libsas implements detection of zone violations. + */ + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_RESV_AB0); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_RESV_AB1); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_RESV_AB2); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_RESV_AB3); + break; + + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_BAD_DEST); + break; + + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_STP_NORES); + break; + + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_EPROTO); + break; + + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + SAS_OREJ_CONN_RATE); + break; + + case SCU_TASK_DONE_LL_R_ERR: + /* Also SCU_TASK_DONE_ACK_NAK_TO: */ + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_LL_SY_TERM: + /* Also SCU_TASK_DONE_NAK_ERR:*/ + case SCU_TASK_DONE_LL_LF_TERM: + /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ + case SCU_TASK_DONE_LL_ABORT_ERR: + case SCU_TASK_DONE_SEQ_INV_TYPE: + /* Also SCU_TASK_DONE_UNEXP_XR: */ + case SCU_TASK_DONE_XR_IU_LEN_ERR: + case SCU_TASK_DONE_INV_FIS_LEN: + /* Also SCU_TASK_DONE_XR_WD_LEN: */ + case SCU_TASK_DONE_SDMA_ERR: + case SCU_TASK_DONE_OFFSET_ERR: + case SCU_TASK_DONE_MAX_PLD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ + case SCU_TASK_DONE_SMP_LL_RX_ERR: + case SCU_TASK_DONE_UNEXP_DATA: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_DONE_TASK_ABORT: + default: + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAM_STAT_TASK_ABORTED; + + if (task->task_proto == SAS_PROTOCOL_SMP) + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + else + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + } +} + +static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) +{ + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (void *)&ts->buf[0]; + + resp->frame_len = sizeof(*fis); + memcpy(resp->ending_fis, fis, sizeof(*fis)); + ts->buf_valid_size = sizeof(*resp); + + /* If an error is flagged let libata decode the fis */ + if (ac_err_mask(fis->status)) + ts->stat = SAS_PROTO_RESPONSE; + else + ts->stat = SAM_STAT_GOOD; + + ts->resp = SAS_TASK_COMPLETE; +} + +static void isci_request_io_request_complete(struct isci_host *ihost, + struct isci_request *request, + enum sci_io_status completion_status) +{ + struct sas_task *task = isci_request_access_task(request); + struct ssp_response_iu *resp_iu; + unsigned long task_flags; + struct isci_remote_device *idev = request->target_device; + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, task = %p, " + "task->data_dir = %d completion_status = 0x%x\n", + __func__, request, task, task->data_dir, completion_status); + + /* The request is done from an SCU HW perspective. */ + + /* This is an active request being completed from the core. */ + switch (completion_status) { + + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, request, task); + + if (sas_protocol_ata(task->task_proto)) { + isci_process_stp_response(task, &request->stp.rsp); + } else if (SAS_PROTOCOL_SSP == task->task_proto) { + + /* crack the iu response buffer. */ + resp_iu = &request->ssp.rsp; + isci_request_process_response_iu(task, resp_iu, + &ihost->pdev->dev); + + } else if (SAS_PROTOCOL_SMP == task->task_proto) { + + dev_err(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); + + } else + dev_err(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = task->task_status.resp; + status = task->task_status.stat; + break; + + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: + + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) { + + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length = sci_req_tx_bytes(request); + + task->task_status.residual + = task->total_xfer_len - transferred_length; + + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; + + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, status); + + } else + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_SUCCESS\n", + __func__); + break; + + case SCI_IO_FAILURE_TERMINATED: + + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, request, task); + + /* The request was terminated explicitly. */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + break; + + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + + isci_request_handle_controller_specific_errors(idev, request, + task, &response, + &status); + break; + + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + case SCI_FAILURE_RETRY_REQUIRED: + + /* Fail the I/O so it can be retried. */ + response = SAS_TASK_UNDELIVERED; + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + + default: + /* Catch any otherwise unhandled error codes here. */ + dev_dbg(&ihost->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); + + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + if (SAS_PROTOCOL_SMP == task->task_proto) + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + else + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + if (task->data_dir == DMA_NONE) + break; + if (task->num_scatter == 0) + /* 0 indicates a single dma address */ + dma_unmap_single(&ihost->pdev->dev, + request->zero_scatter_daddr, + task->total_xfer_len, task->data_dir); + else /* unmap the sgl dma addresses */ + dma_unmap_sg(&ihost->pdev->dev, task->scatter, + request->num_sg_entries, task->data_dir); + break; + case SAS_PROTOCOL_SMP: { + struct scatterlist *sg = &task->smp_task.smp_req; + struct smp_req *smp_req; + void *kaddr; + + dma_unmap_sg(&ihost->pdev->dev, sg, 1, DMA_TO_DEVICE); + + /* need to swab it back in case the command buffer is re-used */ + kaddr = kmap_atomic(sg_page(sg)); + smp_req = kaddr + sg->offset; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + kunmap_atomic(kaddr); + break; + } + default: + break; + } + + spin_lock_irqsave(&task->task_state_lock, task_flags); + + task->task_status.resp = response; + task->task_status.stat = status; + + if (test_bit(IREQ_COMPLETE_IN_TARGET, &request->flags)) { + /* Normal notification (task_done) */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + } + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + /* complete the io request to the core. */ + sci_controller_complete_io(ihost, request->target_device, request); + + /* set terminated handle so it cannot be completed or + * terminated again, and to cause any calls into abort + * task to recognize the already completed case. + */ + set_bit(IREQ_TERMINATED, &request->flags); + + ireq_done(ihost, request, task); +} + +static void sci_request_started_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct domain_device *dev = ireq->target_device->domain_dev; + enum sci_base_request_states state; + struct sas_task *task; + + /* XXX as hch said always creating an internal sas_task for tmf + * requests would simplify the driver + */ + task = (test_bit(IREQ_TMF, &ireq->flags)) ? NULL : isci_request_access_task(ireq); + + /* all unaccelerated request types (non ssp or ncq) handled with + * substates + */ + if (!task && dev->dev_type == SAS_END_DEVICE) { + state = SCI_REQ_TASK_WAIT_TC_COMP; + } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { + state = SCI_REQ_SMP_WAIT_RESP; + } else if (task && sas_protocol_ata(task->task_proto) && + !task->ata_task.use_ncq) { + if (dev->sata_dev.command_set == ATAPI_COMMAND_SET && + task->ata_task.fis.command == ATA_CMD_PACKET) { + state = SCI_REQ_ATAPI_WAIT_H2D; + } else if (task->data_dir == DMA_NONE) { + state = SCI_REQ_STP_NON_DATA_WAIT_H2D; + } else if (task->ata_task.dma_xfer) { + state = SCI_REQ_STP_UDMA_WAIT_TC_COMP; + } else /* PIO */ { + state = SCI_REQ_STP_PIO_WAIT_H2D; + } + } else { + /* SSP or NCQ are fully accelerated, no substates */ + return; + } + sci_change_state(sm, state); +} + +static void sci_request_completed_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct isci_host *ihost = ireq->owning_controller; + + /* Tell the SCI_USER that the IO request is complete */ + if (!test_bit(IREQ_TMF, &ireq->flags)) + isci_request_io_request_complete(ihost, ireq, + ireq->sci_status); + else + isci_task_request_complete(ihost, ireq, ireq->sci_status); +} + +static void sci_request_aborting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + /* Setting the abort bit in the Task Context is required by the silicon. */ + ireq->tc->abort = 1; +} + +static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static const struct sci_base_state sci_request_state_table[] = { + [SCI_REQ_INIT] = { }, + [SCI_REQ_CONSTRUCTED] = { }, + [SCI_REQ_STARTED] = { + .enter_state = sci_request_started_state_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_H2D] = { + .enter_state = sci_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { }, + [SCI_REQ_STP_PIO_WAIT_H2D] = { + .enter_state = sci_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCI_REQ_STP_PIO_WAIT_FRAME] = { }, + [SCI_REQ_STP_PIO_DATA_IN] = { }, + [SCI_REQ_STP_PIO_DATA_OUT] = { }, + [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, + [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, + [SCI_REQ_TASK_WAIT_TC_COMP] = { }, + [SCI_REQ_TASK_WAIT_TC_RESP] = { }, + [SCI_REQ_SMP_WAIT_RESP] = { }, + [SCI_REQ_SMP_WAIT_TC_COMP] = { }, + [SCI_REQ_ATAPI_WAIT_H2D] = { }, + [SCI_REQ_ATAPI_WAIT_PIO_SETUP] = { }, + [SCI_REQ_ATAPI_WAIT_D2H] = { }, + [SCI_REQ_ATAPI_WAIT_TC_COMP] = { }, + [SCI_REQ_COMPLETED] = { + .enter_state = sci_request_completed_state_enter, + }, + [SCI_REQ_ABORTING] = { + .enter_state = sci_request_aborting_state_enter, + }, + [SCI_REQ_FINAL] = { }, +}; + +static void +sci_general_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT); + + ireq->target_device = idev; + ireq->protocol = SAS_PROTOCOL_NONE; + ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + + ireq->sci_status = SCI_SUCCESS; + ireq->scu_status = 0; + ireq->post_context = 0xFFFFFFFF; +} + +static enum sci_status +sci_io_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + + if (dev->dev_type == SAS_END_DEVICE) + /* pass */; + else if (dev_is_sata(dev)) + memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); + else if (dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + memset(ireq->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); + + return status; +} + +enum sci_status sci_task_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 io_tag, struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (dev->dev_type == SAS_END_DEVICE || dev_is_sata(dev)) { + set_bit(IREQ_TMF, &ireq->flags); + memset(ireq->tc, 0, sizeof(struct scu_task_context)); + + /* Set the protocol indicator. */ + if (dev_is_sata(dev)) + ireq->protocol = SAS_PROTOCOL_STP; + else + ireq->protocol = SAS_PROTOCOL_SSP; + } else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + return status; +} + +static enum sci_status isci_request_ssp_request_construct( + struct isci_request *request) +{ + enum sci_status status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + status = sci_io_request_construct_basic_ssp(request); + return status; +} + +static enum sci_status isci_request_stp_request_construct(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct host_to_dev_fis *fis = &ireq->stp.cmd; + struct ata_queued_cmd *qc = task->uldd_task; + enum sci_status status; + + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: ireq = %p\n", + __func__, + ireq); + + memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); + if (!task->ata_task.device_control_reg_update) + fis->flags |= 0x80; + fis->flags &= 0xF0; + + status = sci_io_request_construct_basic_sata(ireq); + + if (qc && (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ)) { + fis->sector_count = qc->tag << 3; + ireq->tc->type.stp.ncq_tag = qc->tag; + } + + return status; +} + +static enum sci_status +sci_io_request_construct_smp(struct device *dev, + struct isci_request *ireq, + struct sas_task *task) +{ + struct scatterlist *sg = &task->smp_task.smp_req; + struct isci_remote_device *idev; + struct scu_task_context *task_context; + struct isci_port *iport; + struct smp_req *smp_req; + void *kaddr; + u8 req_len; + u32 cmd; + + kaddr = kmap_atomic(sg_page(sg)); + smp_req = kaddr + sg->offset; + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. + */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + req_len = smp_req->req_len; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + cmd = *(u32 *) smp_req; + kunmap_atomic(kaddr); + + if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE)) + return SCI_FAILURE; + + ireq->protocol = SAS_PROTOCOL_SMP; + + /* byte swap the smp request. */ + + task_context = ireq->tc; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* + * Fill in the TC with the its required data + * 00h + */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = req_len; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy(&task_context->type.smp, &cmd, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ + task_context->task_phase = 0; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg)); + task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32)); + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +/* + * isci_smp_request_build() - This function builds the smp request. + * @ireq: This parameter points to the isci_request allocated in the + * request construct function. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_smp_request_build(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct device *dev = &ireq->isci_host->pdev->dev; + enum sci_status status = SCI_FAILURE; + + status = sci_io_request_construct_smp(dev, ireq, task); + if (status != SCI_SUCCESS) + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: failed with status = %d\n", + __func__, + status); + + return status; +} + +/** + * isci_io_request_build() - This function builds the io request object. + * @ihost: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_io_request_build(struct isci_host *ihost, + struct isci_request *request, + struct isci_remote_device *idev) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = 0x%p; request = %p, " + "num_scatter = %d\n", + __func__, + idev, + request, + task->num_scatter); + + /* map the sgl addresses, if present. + * libata does the mapping for sata devices + * before we get the request. + */ + if (task->num_scatter && + !sas_protocol_ata(task->task_proto) && + !(SAS_PROTOCOL_SMP & task->task_proto)) { + + request->num_sg_entries = dma_map_sg( + &ihost->pdev->dev, + task->scatter, + task->num_scatter, + task->data_dir + ); + + if (request->num_sg_entries == 0) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } + + status = sci_io_request_construct(ihost, idev, request); + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request construct\n", + __func__); + return SCI_FAILURE; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: + status = isci_request_ssp_request_construct(request); + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + status = isci_request_stp_request_construct(request); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + return SCI_FAILURE; + } + + return SCI_SUCCESS; +} + +static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 tag) +{ + struct isci_request *ireq; + + ireq = ihost->reqs[ISCI_TAG_TCI(tag)]; + ireq->io_tag = tag; + ireq->io_request_completion = NULL; + ireq->flags = 0; + ireq->num_sg_entries = 0; + + return ireq; +} + +static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost, + struct sas_task *task, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.io_task_ptr = task; + clear_bit(IREQ_TMF, &ireq->flags); + task->lldd_task = ireq; + + return ireq; +} + +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.tmf_task_ptr = isci_tmf; + set_bit(IREQ_TMF, &ireq->flags); + + return ireq; +} + +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, u16 tag) +{ + enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + struct isci_request *ireq; + unsigned long flags; + int ret = 0; + + /* do common allocation and init of request object. */ + ireq = isci_io_request_from_tag(ihost, task, tag); + + status = isci_io_request_build(ihost, ireq, idev); + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + return status; + } + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) { + + if (isci_task_is_ncq_recovery(task)) { + + /* The device is in an NCQ recovery state. Issue the + * request on the task side. Note that it will + * complete on the I/O request side because the + * request was built that way (ie. + * ireq->is_task_management_request is false). + */ + status = sci_controller_start_task(ihost, + idev, + ireq); + } else { + status = SCI_FAILURE; + } + } else { + /* send the request, let the core assign the IO TAG. */ + status = sci_controller_start_io(ihost, idev, + ireq); + } + + if (status != SCI_SUCCESS && + status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request start (0x%x)\n", + __func__, status); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + return status; + } + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + */ + if (status != SCI_SUCCESS) { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error + * handler thread. + */ + sas_task_abort(task); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + + return ret; +} |