aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/dc395x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/dc395x.c')
-rw-r--r--drivers/scsi/dc395x.c321
1 files changed, 155 insertions, 166 deletions
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 6c59c02c1ed..83d9bf6fa6c 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -57,6 +57,7 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <scsi/scsi.h>
@@ -234,7 +235,7 @@ struct ScsiReqBlk {
u8 sg_count; /* No of HW sg entries for this request */
u8 sg_index; /* Index of HW sg entry for this request */
- size_t total_xfer_length; /* Total number of bytes remaining to be transfered */
+ size_t total_xfer_length; /* Total number of bytes remaining to be transferred */
size_t request_length; /* Total number of bytes in this request */
/*
* The sense buffer handling function, request_sense, uses
@@ -307,6 +308,8 @@ struct AdapterCtlBlk {
struct timer_list waiting_timer;
struct timer_list selto_timer;
+ unsigned long last_reset;
+
u16 srb_count;
u8 sel_timeout;
@@ -488,7 +491,7 @@ struct ParameterData {
int def; /* default value */
int safe; /* safe value */
};
-static struct ParameterData __devinitdata cfg_data[] = {
+static struct ParameterData cfg_data[] = {
{ /* adapter id */
CFG_PARAM_UNSET,
0,
@@ -545,7 +548,7 @@ static struct ParameterData __devinitdata cfg_data[] = {
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
-static int use_safe_settings = 0;
+static bool use_safe_settings = 0;
module_param_named(safe, use_safe_settings, bool, 0);
MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false");
@@ -573,7 +576,7 @@ MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
* set_safe_settings - if the use_safe_settings option is set then
* set all values to the safe and slow values.
**/
-static void __devinit set_safe_settings(void)
+static void set_safe_settings(void)
{
if (use_safe_settings)
{
@@ -592,7 +595,7 @@ static void __devinit set_safe_settings(void)
* fix_settings - reset any boot parameters which are out of range
* back to the default values.
**/
-static void __devinit fix_settings(void)
+static void fix_settings(void)
{
int i;
@@ -619,7 +622,7 @@ static void __devinit fix_settings(void)
* Mapping from the eeprom delay index value (index into this array)
* to the number of actual seconds that the delay should be for.
*/
-static char __devinitdata eeprom_index_to_delay_map[] =
+static char eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
@@ -629,7 +632,7 @@ static char __devinitdata eeprom_index_to_delay_map[] =
*
* @eeprom: The eeprom structure in which we find the delay index to map.
**/
-static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
+static void eeprom_index_to_delay(struct NvRamType *eeprom)
{
eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
}
@@ -642,7 +645,7 @@ static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
*
* @delay: The delay, in seconds, to find the eeprom index for.
**/
-static int __devinit delay_to_eeprom_index(int delay)
+static int delay_to_eeprom_index(int delay)
{
u8 idx = 0;
while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
@@ -658,7 +661,7 @@ static int __devinit delay_to_eeprom_index(int delay)
*
* @eeprom: The eeprom data to override with command line options.
**/
-static void __devinit eeprom_override(struct NvRamType *eeprom)
+static void eeprom_override(struct NvRamType *eeprom)
{
u8 id;
@@ -777,8 +780,8 @@ static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_insert: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add(&srb->list, &dcb->srb_waiting_list);
}
@@ -786,16 +789,16 @@ static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
static void srb_waiting_append(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_append: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_waiting_list);
}
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
- dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_going_append: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_going_list);
}
@@ -804,8 +807,8 @@ static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
- dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_going_remove: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
if (i == srb) {
@@ -820,8 +823,8 @@ static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
- dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "srb_waiting_remove: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
if (i == srb) {
@@ -835,8 +838,8 @@ static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0,
- "srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ "srb_going_to_waiting_move: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_waiting_list);
}
@@ -845,8 +848,8 @@ static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0,
- "srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ "srb_waiting_to_going_move: (0x%p) <%02i-%i> srb=%p\n",
+ srb->cmd, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_going_list);
}
@@ -859,9 +862,9 @@ static void waiting_set_timer(struct AdapterCtlBlk *acb, unsigned long to)
init_timer(&acb->waiting_timer);
acb->waiting_timer.function = waiting_timeout;
acb->waiting_timer.data = (unsigned long) acb;
- if (time_before(jiffies + to, acb->scsi_host->last_reset - HZ / 2))
+ if (time_before(jiffies + to, acb->last_reset - HZ / 2))
acb->waiting_timer.expires =
- acb->scsi_host->last_reset - HZ / 2 + 1;
+ acb->last_reset - HZ / 2 + 1;
else
acb->waiting_timer.expires = jiffies + to + 1;
add_timer(&acb->waiting_timer);
@@ -981,8 +984,8 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
{
int nseg;
enum dma_data_direction dir = cmd->sc_data_direction;
- dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
- cmd->serial_number, dcb->target_id, dcb->target_lun);
+ dprintkdbg(DBG_0, "build_srb: (0x%p) <%02i-%i>\n",
+ cmd, dcb->target_id, dcb->target_lun);
srb->dcb = dcb;
srb->cmd = cmd;
@@ -1079,14 +1082,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
* and is expected to be held on return.
*
**/
-static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
- dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ dprintkdbg(DBG_0, "queue_command: (0x%p) <%02i-%i> cmnd=0x%02x\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
/* Assume BAD_TARGET; will be cleared later */
cmd->result = DID_BAD_TARGET << 16;
@@ -1139,7 +1142,7 @@ static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_
/* process immediately */
send_srb(acb, srb);
}
- dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->serial_number);
+ dprintkdbg(DBG_1, "queue_command: (0x%p) done\n", cmd);
return 0;
complete:
@@ -1153,6 +1156,7 @@ complete:
return 0;
}
+static DEF_SCSI_QCMD(dc395x_queue_command)
/*
* Return the disk geometry for the given SCSI device.
@@ -1201,9 +1205,9 @@ static void dump_register_info(struct AdapterCtlBlk *acb,
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
srb, srb->cmd);
else
- dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
+ dprintkl(KERN_INFO, "dump: srb=%p cmd=%p "
"cmnd=0x%02x <%02i-%i>\n",
- srb, srb->cmd, srb->cmd->serial_number,
+ srb, srb->cmd,
srb->cmd->cmnd[0], srb->cmd->device->id,
srb->cmd->device->lun);
printk(" sglist=%p cnt=%i idx=%i len=%zu\n",
@@ -1299,8 +1303,8 @@ static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkl(KERN_INFO,
- "eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+ "eh_bus_reset: (0%p) target=<%02i-%i> cmd=%p\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd);
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
@@ -1317,7 +1321,7 @@ static int __dc395x_eh_bus_reset(struct scsi_cmnd *cmd)
udelay(500);
/* We may be in serious trouble. Wait some seconds */
- acb->scsi_host->last_reset =
+ acb->last_reset =
jiffies + 3 * HZ / 2 +
HZ * acb->eeprom.delay_time;
@@ -1366,8 +1370,8 @@ static int dc395x_eh_abort(struct scsi_cmnd *cmd)
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
- dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd);
+ dprintkl(KERN_INFO, "eh_abort: (0x%p) target=<%02i-%i> cmd=%p\n",
+ cmd, cmd->device->id, cmd->device->lun, cmd);
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
if (!dcb) {
@@ -1460,9 +1464,9 @@ static void selto_timer(struct AdapterCtlBlk *acb)
acb->selto_timer.function = selection_timeout_missed;
acb->selto_timer.data = (unsigned long) acb;
if (time_before
- (jiffies + HZ, acb->scsi_host->last_reset + HZ / 2))
+ (jiffies + HZ, acb->last_reset + HZ / 2))
acb->selto_timer.expires =
- acb->scsi_host->last_reset + HZ / 2 + 1;
+ acb->last_reset + HZ / 2 + 1;
else
acb->selto_timer.expires = jiffies + HZ + 1;
add_timer(&acb->selto_timer);
@@ -1493,8 +1497,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
u16 s_stat2, return_code;
u8 s_stat, scsicommand, i, identify_message;
u8 *ptr;
- dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun, srb);
+ dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
+ dcb->target_id, dcb->target_lun, srb);
srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
@@ -1503,8 +1507,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
#if 1
if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
- srb->cmd->serial_number, s_stat, s_stat2);
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) BUSY %02x %04x\n",
+ s_stat, s_stat2);
/*
* Try anyway?
*
@@ -1520,21 +1524,20 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
}
#endif
if (acb->active_dcb) {
- dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
- "command while another command (pid#%li) is active.",
- srb->cmd->serial_number,
+ dprintkl(KERN_DEBUG, "start_scsi: (0x%p) Attempt to start a"
+ "command while another command (0x%p) is active.",
+ srb->cmd,
acb->active_dcb->active_srb ?
- acb->active_dcb->active_srb->cmd->serial_number : 0);
+ acb->active_dcb->active_srb->cmd : 0);
return 1;
}
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
- srb->cmd->serial_number);
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) Failed (busy)\n", srb->cmd);
return 1;
}
/* Allow starting of SCSI commands half a second before we allow the mid-level
* to queue them again after a reset */
- if (time_before(jiffies, acb->scsi_host->last_reset - HZ / 2)) {
+ if (time_before(jiffies, acb->last_reset - HZ / 2)) {
dprintkdbg(DBG_KG, "start_scsi: Refuse cmds (reset wait)\n");
return 1;
}
@@ -1596,14 +1599,14 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
u32 tag_mask = 1;
u8 tag_number = 0;
while (tag_mask & dcb->tag_mask
- && tag_number <= dcb->max_command) {
+ && tag_number < dcb->max_command) {
tag_mask = tag_mask << 1;
tag_number++;
}
if (tag_number >= dcb->max_command) {
- dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
+ dprintkl(KERN_WARNING, "start_scsi: (0x%p) "
"Out of tags target=<%02i-%i>)\n",
- srb->cmd->serial_number, srb->cmd->device->id,
+ srb->cmd, srb->cmd->device->id,
srb->cmd->device->lun);
srb->state = SRB_READY;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL,
@@ -1621,8 +1624,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
#endif
/*polling:*/
/* Send CDB ..command block ......... */
- dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+ dprintkdbg(DBG_KG, "start_scsi: (0x%p) <%02i-%i> cmnd=0x%02x tag=%i\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
srb->cmd->cmnd[0], srb->tag_number);
if (srb->flag & AUTO_REQSENSE) {
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
@@ -1645,8 +1648,8 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
* we caught an interrupt (must be reset or reselection ... )
* : Let's process it first!
*/
- dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+ dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> Failed - busy\n",
+ srb->cmd, dcb->target_id, dcb->target_lun);
srb->state = SRB_READY;
free_tag(dcb, srb);
srb->msg_count = 0;
@@ -1772,7 +1775,7 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
dc395x_statev(acb, srb, &scsi_status);
/*
- * if there were any exception occured scsi_status
+ * if there were any exception occurred scsi_status
* will be modify to bus free phase new scsi_status
* transfer out from ... previous dc395x_statev
*/
@@ -1841,7 +1844,7 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id)
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase0: (0x%p)\n", srb->cmd);
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
@@ -1855,18 +1858,18 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
{
u16 i;
u8 *ptr;
- dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "msgout_phase1");
if (!(srb->state & SRB_MSGOUT)) {
srb->state |= SRB_MSGOUT;
dprintkl(KERN_DEBUG,
- "msgout_phase1: (pid#%li) Phase unexpected\n",
- srb->cmd->serial_number); /* So what ? */
+ "msgout_phase1: (0x%p) Phase unexpected\n",
+ srb->cmd); /* So what ? */
}
if (!srb->msg_count) {
- dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
- srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgout_phase1: (0x%p) NOP msg\n",
+ srb->cmd);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
@@ -1886,7 +1889,7 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "command_phase0: (0x%p)\n", srb->cmd);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
@@ -1897,7 +1900,7 @@ static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
struct DeviceCtlBlk *dcb;
u8 *ptr;
u16 i;
- dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "command_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "command_phase1");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
@@ -1952,11 +1955,11 @@ static void sg_verify_length(struct ScsiReqBlk *srb)
static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
{
u8 idx;
- u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
+ u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
struct SGentry *psge = srb->segment_x + srb->sg_index;
dprintkdbg(DBG_0,
- "sg_update_list: Transfered %i of %i bytes, %i remain\n",
+ "sg_update_list: Transferred %i of %i bytes, %i remain\n",
xferred, srb->total_xfer_length, left);
if (xferred == 0) {
/* nothing to update since we did not transfer any data */
@@ -1988,7 +1991,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
/*
- * We have transfered a single byte (PIO mode?) and need to update
+ * We have transferred a single byte (PIO mode?) and need to update
* the count of bytes remaining (total_xfer_length) and update the sg
* entry to either point to next byte in the current sg entry, or of
* already at the end to point to the start of the next sg entry
@@ -2027,7 +2030,7 @@ static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
/*
- * Those no of bytes will be transfered w/ PIO through the SCSI FIFO
+ * Those no of bytes will be transferred w/ PIO through the SCSI FIFO
* Seems to be needed for unknown reasons; could be a hardware bug :-(
*/
#define DC395x_LASTPIO 4
@@ -2039,8 +2042,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
struct DeviceCtlBlk *dcb = srb->dcb;
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
- dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_out_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: We need to drain the buffers before we draw any conclusions!
@@ -2169,8 +2172,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_out_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
clear_fifo(acb, "data_out_phase1");
/* do prepare before transfer when data out phase */
data_io_transfer(acb, srb, XFERDATAOUT);
@@ -2181,8 +2184,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
{
u16 scsi_status = *pscsi_status;
- dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_in_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: DataIn is much more tricky than DataOut. When the device is finished
@@ -2202,8 +2205,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
unsigned int sc, fc;
if (scsi_status & PARITYERROR) {
- dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
- "Parity Error\n", srb->cmd->serial_number);
+ dprintkl(KERN_INFO, "data_in_phase0: (0x%p) "
+ "Parity Error\n", srb->cmd);
srb->status |= PARITY_ERROR;
}
/*
@@ -2254,7 +2257,7 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
srb->total_xfer_length, d_left_counter);
#if DC395x_LASTPIO
- /* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
+ /* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
if (d_left_counter
&& srb->total_xfer_length <= DC395x_LASTPIO) {
size_t left_io = srb->total_xfer_length;
@@ -2392,8 +2395,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "data_in_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
data_io_transfer(acb, srb, XFERDATAIN);
}
@@ -2404,8 +2407,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
dprintkdbg(DBG_0,
- "data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun,
+ "data_io_transfer: (0x%p) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun,
((io_dir & DMACMD_DIR) ? 'r' : 'w'),
srb->total_xfer_length, srb->sg_index, srb->sg_count);
if (srb == acb->tmp_srb)
@@ -2577,8 +2580,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "status_phase0: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
srb->state = SRB_COMPLETED;
@@ -2591,8 +2594,8 @@ static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->cmd->device->id, srb->cmd->device->lun);
+ dprintkdbg(DBG_0, "status_phase1: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->cmd->device->id, srb->cmd->device->lun);
srb->state = SRB_STATUS;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
@@ -2633,8 +2636,8 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
{
struct ScsiReqBlk *srb = NULL;
struct ScsiReqBlk *i;
- dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
- srb->cmd->serial_number, tag, srb);
+ dprintkdbg(DBG_0, "msgin_qtag: (0x%p) tag=%i srb=%p\n",
+ srb->cmd, tag, srb);
if (!(dcb->tag_mask & (1 << tag)))
dprintkl(KERN_DEBUG,
@@ -2652,8 +2655,8 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
if (!srb)
goto mingx0;
- dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
- srb->cmd->serial_number, srb->dcb->target_id, srb->dcb->target_lun);
+ dprintkdbg(DBG_0, "msgin_qtag: (0x%p) <%02i-%i>\n",
+ srb->cmd, srb->dcb->target_id, srb->dcb->target_lun);
if (dcb->flag & ABORT_DEV_) {
/*srb->state = SRB_ABORT_SENT; */
enable_msgout_abort(acb, srb);
@@ -2863,7 +2866,7 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb = acb->active_dcb;
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p)\n", srb->cmd);
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
@@ -2929,9 +2932,9 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* SAVE POINTER may be ignored as we have the struct
* ScsiReqBlk* associated with the scsi command.
*/
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
"SAVE POINTER rem=%i Ignore\n",
- srb->cmd->serial_number, srb->total_xfer_length);
+ srb->cmd, srb->total_xfer_length);
break;
case RESTORE_POINTERS:
@@ -2939,9 +2942,9 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
break;
case ABORT:
- dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
+ dprintkdbg(DBG_0, "msgin_phase0: (0x%p) "
"<%02i-%i> ABORT msg\n",
- srb->cmd->serial_number, dcb->target_id,
+ srb->cmd, dcb->target_id,
dcb->target_lun);
dcb->flag |= ABORT_DEV_;
enable_msgout_abort(acb, srb);
@@ -2973,7 +2976,7 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
- dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "msgin_phase1: (0x%p)\n", srb->cmd);
clear_fifo(acb, "msgin_phase1");
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
if (!(srb->state & SRB_MSGIN)) {
@@ -3030,7 +3033,7 @@ static void disconnect(struct AdapterCtlBlk *acb)
dprintkl(KERN_ERR, "disconnect: No such device\n");
udelay(500);
/* Suspend queue for a while */
- acb->scsi_host->last_reset =
+ acb->last_reset =
jiffies + HZ / 2 +
HZ * acb->eeprom.delay_time;
clear_fifo(acb, "disconnectEx");
@@ -3039,7 +3042,7 @@ static void disconnect(struct AdapterCtlBlk *acb)
}
srb = dcb->active_srb;
acb->active_dcb = NULL;
- dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->serial_number);
+ dprintkdbg(DBG_0, "disconnect: (0x%p)\n", srb->cmd);
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
clear_fifo(acb, "disconnect");
@@ -3052,7 +3055,7 @@ static void disconnect(struct AdapterCtlBlk *acb)
waiting_process_next(acb);
} else if (srb->state & SRB_ABORT_SENT) {
dcb->flag &= ~ABORT_DEV_;
- acb->scsi_host->last_reset = jiffies + HZ / 2 + 1;
+ acb->last_reset = jiffies + HZ / 2 + 1;
dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
doing_srb_done(acb, DID_ABORT, srb->cmd, 1);
waiting_process_next(acb);
@@ -3069,14 +3072,14 @@ static void disconnect(struct AdapterCtlBlk *acb)
&& srb->state != SRB_MSGOUT) {
srb->state = SRB_READY;
dprintkl(KERN_DEBUG,
- "disconnect: (pid#%li) Unexpected\n",
- srb->cmd->serial_number);
+ "disconnect: (0x%p) Unexpected\n",
+ srb->cmd);
srb->target_status = SCSI_STAT_SEL_TIMEOUT;
goto disc1;
} else {
/* Normal selection timeout */
- dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
- "<%02i-%i> SelTO\n", srb->cmd->serial_number,
+ dprintkdbg(DBG_KG, "disconnect: (0x%p) "
+ "<%02i-%i> SelTO\n", srb->cmd,
dcb->target_id, dcb->target_lun);
if (srb->retry_count++ > DC395x_MAX_RETRIES
|| acb->scan_devices) {
@@ -3087,8 +3090,8 @@ static void disconnect(struct AdapterCtlBlk *acb)
free_tag(dcb, srb);
srb_going_to_waiting_move(dcb, srb);
dprintkdbg(DBG_KG,
- "disconnect: (pid#%li) Retry\n",
- srb->cmd->serial_number);
+ "disconnect: (0x%p) Retry\n",
+ srb->cmd);
waiting_set_timer(acb, HZ / 20);
}
} else if (srb->state & SRB_DISCONNECT) {
@@ -3140,9 +3143,9 @@ static void reselect(struct AdapterCtlBlk *acb)
}
/* Why the if ? */
if (!acb->scan_devices) {
- dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
+ dprintkdbg(DBG_KG, "reselect: (0x%p) <%02i-%i> "
"Arb lost but Resel win rsel=%i stat=0x%04x\n",
- srb->cmd->serial_number, dcb->target_id,
+ srb->cmd, dcb->target_id,
dcb->target_lun, rsel_tar_lun_id,
DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
arblostflag = 1;
@@ -3316,7 +3319,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
enum dma_data_direction dir = cmd->sc_data_direction;
int ckc_only = 1;
- dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->serial_number,
+ dprintkdbg(DBG_1, "srb_done: (0x%p) <%02i-%i>\n", srb->cmd,
srb->cmd->device->id, srb->cmd->device->lun);
dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p\n",
srb, scsi_sg_count(cmd), srb->sg_index, srb->sg_count,
@@ -3495,9 +3498,9 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
cmd->SCp.buffers_residual = 0;
if (debug_enabled(DBG_KG)) {
if (srb->total_xfer_length)
- dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
+ dprintkdbg(DBG_KG, "srb_done: (0x%p) <%02i-%i> "
"cmnd=0x%02x Missed %i bytes\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun,
+ cmd, cmd->device->id, cmd->device->lun,
cmd->cmnd[0], srb->total_xfer_length);
}
@@ -3506,8 +3509,8 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (srb == acb->tmp_srb)
dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
else {
- dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
- cmd->serial_number, cmd->result);
+ dprintkdbg(DBG_0, "srb_done: (0x%p) done result=0x%08x\n",
+ cmd, cmd->result);
srb_free_insert(acb, srb);
}
pci_unmap_srb(acb, srb);
@@ -3536,7 +3539,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
p = srb->cmd;
dir = p->sc_data_direction;
result = MK_RES(0, did_flag, 0, 0);
- printk("G:%li(%02i-%i) ", p->serial_number,
+ printk("G:%p(%02i-%i) ", p,
p->device->id, p->device->lun);
srb_going_remove(dcb, srb);
free_tag(dcb, srb);
@@ -3566,7 +3569,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
p = srb->cmd;
result = MK_RES(0, did_flag, 0, 0);
- printk("W:%li<%02i-%i>", p->serial_number, p->device->id,
+ printk("W:%p<%02i-%i>", p, p->device->id,
p->device->lun);
srb_waiting_remove(dcb, srb);
srb_free_insert(acb, srb);
@@ -3648,7 +3651,7 @@ static void scsi_reset_detect(struct AdapterCtlBlk *acb)
/*DC395x_write8(acb, TRM_S1040_DMA_CONTROL,STOPDMAXFER); */
udelay(500);
/* Maybe we locked up the bus? Then lets wait even longer ... */
- acb->scsi_host->last_reset =
+ acb->last_reset =
jiffies + 5 * HZ / 2 +
HZ * acb->eeprom.delay_time;
@@ -3675,8 +3678,8 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
- dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
- cmd->serial_number, cmd->device->id, cmd->device->lun);
+ dprintkdbg(DBG_1, "request_sense: (0x%p) <%02i-%i>\n",
+ cmd, cmd->device->id, cmd->device->lun);
srb->flag |= AUTO_REQSENSE;
srb->adapter_status = 0;
@@ -3706,8 +3709,8 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
dprintkl(KERN_DEBUG,
- "request_sense: (pid#%li) failed <%02i-%i>\n",
- srb->cmd->serial_number, dcb->target_id, dcb->target_lun);
+ "request_sense: (0x%p) failed <%02i-%i>\n",
+ srb->cmd, dcb->target_id, dcb->target_lun);
srb_going_to_waiting_move(dcb, srb);
waiting_set_timer(acb, HZ / 100);
}
@@ -3746,13 +3749,13 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
dcb->max_command = 1;
dcb->target_id = target;
dcb->target_lun = lun;
+ dcb->dev_mode = eeprom->target[target].cfg0;
#ifndef DC395x_NO_DISCONNECT
dcb->identify_msg =
IDENTIFY(dcb->dev_mode & NTC_DO_DISCONNECT, lun);
#else
dcb->identify_msg = IDENTIFY(0, lun);
#endif
- dcb->dev_mode = eeprom->target[target].cfg0;
dcb->inquiry7 = 0;
dcb->sync_mode = 0;
dcb->min_nego_period = clock_period[period_index];
@@ -3794,7 +3797,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
* adapter_add_device - Adds the device instance to the adaptor instance.
*
* @acb: The adapter device to be updated
- * @dcb: A newly created and intialised device instance to add.
+ * @dcb: A newly created and initialised device instance to add.
**/
static void adapter_add_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
@@ -3937,7 +3940,7 @@ static void dc395x_slave_destroy(struct scsi_device *scsi_device)
*
* @io_port: base I/O address
**/
-static void __devinit trms1040_wait_30us(unsigned long io_port)
+static void trms1040_wait_30us(unsigned long io_port)
{
/* ScsiPortStallExecution(30); wait 30 us */
outb(5, io_port + TRM_S1040_GEN_TIMER);
@@ -3954,7 +3957,7 @@ static void __devinit trms1040_wait_30us(unsigned long io_port)
* @cmd: SB + op code (command) to send
* @addr: address to send
**/
-static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
+static void trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
{
int i;
u8 send_data;
@@ -3999,7 +4002,7 @@ static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
* @addr: offset into EEPROM
* @byte: bytes to write
**/
-static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
+static void trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
{
int i;
u8 send_data;
@@ -4053,7 +4056,7 @@ static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
* @eeprom: the data to write
* @io_port: the base io port
**/
-static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
{
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
@@ -4093,7 +4096,7 @@ static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long
*
* Returns the byte read.
**/
-static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
+static u8 trms1040_get_data(unsigned long io_port, u8 addr)
{
int i;
u8 read_byte;
@@ -4131,7 +4134,7 @@ static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
* @eeprom: where to store the data
* @io_port: the base io port
**/
-static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
{
u8 *b_eeprom = (u8 *)eeprom;
u8 addr;
@@ -4161,7 +4164,7 @@ static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long
* @eeprom: caller allocated strcuture to read the eeprom data into
* @io_port: io port to read from
**/
-static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
+static void check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
{
u16 *w_eeprom = (u16 *)eeprom;
u16 w_addr;
@@ -4231,7 +4234,7 @@ static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_po
*
* @eeprom: The eeprom data strucutre to show details for.
**/
-static void __devinit print_eeprom_settings(struct NvRamType *eeprom)
+static void print_eeprom_settings(struct NvRamType *eeprom)
{
dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
eeprom->scsi_id,
@@ -4259,7 +4262,7 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
/*
* Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
* should never cross a page boundary */
-static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
+static int adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
{
const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
*SEGMENTX_LEN;
@@ -4305,7 +4308,7 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
*
* @acb: The adapter to print the information for.
**/
-static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
+static void adapter_print_config(struct AdapterCtlBlk *acb)
{
u8 bval;
@@ -4349,7 +4352,7 @@ static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
*
* @acb: The adapter to initialize.
**/
-static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
+static void adapter_init_params(struct AdapterCtlBlk *acb)
{
struct NvRamType *eeprom = &acb->eeprom;
int i;
@@ -4411,7 +4414,7 @@ static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
*
* @host: The scsi host instance to fill in the values for.
**/
-static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
+static void adapter_init_scsi_host(struct Scsi_Host *host)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
struct NvRamType *eeprom = &acb->eeprom;
@@ -4425,7 +4428,7 @@ static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
host->dma_channel = -1;
host->unique_id = acb->io_port_base;
host->irq = acb->irq_level;
- host->last_reset = jiffies;
+ acb->last_reset = jiffies;
host->max_id = 16;
if (host->max_id - 1 == eeprom->scsi_id)
@@ -4452,7 +4455,7 @@ static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
*
* @acb: The adapter which we are to init.
**/
-static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
+static void adapter_init_chip(struct AdapterCtlBlk *acb)
{
struct NvRamType *eeprom = &acb->eeprom;
@@ -4483,7 +4486,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
/*spin_unlock_irq (&io_request_lock); */
udelay(500);
- acb->scsi_host->last_reset =
+ acb->last_reset =
jiffies + HZ / 2 +
HZ * acb->eeprom.delay_time;
@@ -4496,7 +4499,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
* init_adapter - Grab the resource for the card, setup the adapter
* information, set the card into a known state, create the various
* tables etc etc. This basically gets all adapter information all up
- * to date, intialised and gets the chip in sync with it.
+ * to date, initialised and gets the chip in sync with it.
*
* @host: This hosts adapter structure
* @io_port: The base I/O port
@@ -4505,8 +4508,8 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
* Returns 0 if the initialization succeeds, any other value on
* failure.
**/
-static int __devinit adapter_init(struct AdapterCtlBlk *acb,
- unsigned long io_port, u32 io_port_len, unsigned int irq)
+static int adapter_init(struct AdapterCtlBlk *acb, unsigned long io_port,
+ u32 io_port_len, unsigned int irq)
{
if (!request_region(io_port, io_port_len, DC395X_NAME)) {
dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
@@ -4615,26 +4618,21 @@ static void adapter_uninit(struct AdapterCtlBlk *acb)
#undef SPRINTF
-#define SPRINTF(args...) pos += sprintf(pos, args)
+#define SPRINTF(args...) seq_printf(m,##args)
#undef YESNO
#define YESNO(YN) \
if (YN) SPRINTF(" Yes ");\
else SPRINTF(" No ")
-static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
- char **start, off_t offset, int length, int inout)
+static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
int spd, spd1;
- char *pos = buffer;
struct DeviceCtlBlk *dcb;
unsigned long flags;
int dev;
- if (inout) /* Has data been written to the file ? */
- return -EPERM;
-
SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
SPRINTF(" Driver Version " DC395X_VERSION "\n");
@@ -4715,13 +4713,13 @@ static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_waiting_list));
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
- SPRINTF(" %li", srb->cmd->serial_number);
+ SPRINTF(" %p", srb->cmd);
if (!list_empty(&dcb->srb_going_list))
SPRINTF("\nDCB (%02i-%i): Going : %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
list_for_each_entry(srb, &dcb->srb_going_list, list)
- SPRINTF(" %li", srb->cmd->serial_number);
+ SPRINTF(" %p", srb->cmd);
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
SPRINTF("\n");
}
@@ -4734,22 +4732,15 @@ static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
SPRINTF("END\n");
}
- *start = buffer + offset;
DC395x_UNLOCK_IO(acb->scsi_host, flags);
-
- if (pos - buffer < offset)
- return 0;
- else if (pos - buffer - offset < length)
- return pos - buffer - offset;
- else
- return length;
+ return 0;
}
static struct scsi_host_template dc395x_driver_template = {
.module = THIS_MODULE,
.proc_name = DC395X_NAME,
- .proc_info = dc395x_proc_info,
+ .show_info = dc395x_show_info,
.name = DC395X_BANNER " " DC395X_VERSION,
.queuecommand = dc395x_queue_command,
.bios_param = dc395x_bios_param,
@@ -4787,14 +4778,13 @@ static void banner_display(void)
* that it finds in the system. The pci_dev strcuture indicates which
* instance we are being called from.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
* @id: Looks like a pointer to the entry in our pci device table
* that was actually matched by the PCI subsystem.
*
* Returns 0 on success, or an error code (-ve) on failure.
**/
-static int __devinit dc395x_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct Scsi_Host *scsi_host = NULL;
struct AdapterCtlBlk *acb = NULL;
@@ -4858,9 +4848,9 @@ fail:
* dc395x_remove_one - Called to remove a single instance of the
* adapter.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
**/
-static void __devexit dc395x_remove_one(struct pci_dev *dev)
+static void dc395x_remove_one(struct pci_dev *dev)
{
struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
@@ -4871,7 +4861,6 @@ static void __devexit dc395x_remove_one(struct pci_dev *dev)
adapter_uninit(acb);
pci_disable_device(dev);
scsi_host_put(scsi_host);
- pci_set_drvdata(dev, NULL);
}
@@ -4891,7 +4880,7 @@ static struct pci_driver dc395x_driver = {
.name = DC395X_NAME,
.id_table = dc395x_pci_table,
.probe = dc395x_init_one,
- .remove = __devexit_p(dc395x_remove_one),
+ .remove = dc395x_remove_one,
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 07:02:24 +0000