diff options
Diffstat (limited to 'drivers/scsi/bfa/bfa_defs.h')
| -rw-r--r-- | drivers/scsi/bfa/bfa_defs.h | 143 |
1 files changed, 139 insertions, 4 deletions
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h index b5a1595cc0a..877b86dd283 100644 --- a/drivers/scsi/bfa/bfa_defs.h +++ b/drivers/scsi/bfa/bfa_defs.h @@ -45,6 +45,7 @@ enum { BFA_MFG_TYPE_PROWLER_C = 1710, /* Prowler CNA only cards */ BFA_MFG_TYPE_PROWLER_D = 1860, /* Prowler Dual cards */ BFA_MFG_TYPE_CHINOOK = 1867, /* Chinook cards */ + BFA_MFG_TYPE_CHINOOK2 = 1869, /*!< Chinook2 cards */ BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */ }; @@ -59,7 +60,8 @@ enum { (type) == BFA_MFG_TYPE_ASTRA || \ (type) == BFA_MFG_TYPE_LIGHTNING_P0 || \ (type) == BFA_MFG_TYPE_LIGHTNING || \ - (type) == BFA_MFG_TYPE_CHINOOK)) + (type) == BFA_MFG_TYPE_CHINOOK || \ + (type) == BFA_MFG_TYPE_CHINOOK2)) /* * Check if the card having old wwn/mac handling @@ -130,6 +132,7 @@ enum bfa_status { BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists, * contact support */ BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ + BFA_STATUS_BADFLASH = 9, /* Flash is bad */ BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */ @@ -159,10 +162,13 @@ enum bfa_status { BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ + BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */ + BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */ BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ + BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */ BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot * configuration */ BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */ @@ -182,8 +188,48 @@ enum bfa_status { BFA_STATUS_FAA_DISABLED = 198, /* FAA is already disabled */ BFA_STATUS_FAA_ACQUIRED = 199, /* FAA is already acquired */ BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */ + BFA_STATUS_BBCR_FC_ONLY = 201, /*!< BBCredit Recovery is supported for * + * FC mode only */ BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */ BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */ + BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */ + BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported + * on mezz cards */ + BFA_STATUS_INVALID_BW = 233, /* Invalid bandwidth value */ + BFA_STATUS_QOS_BW_INVALID = 234, /* Invalid QOS bandwidth + * configuration */ + BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */ + BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */ + BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */ + BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */ + BFA_STATUS_DPORT_NO_SFP = 243, /* SFP is not present.\n D-port will be + * enabled but it will be operational + * only after inserting a valid SFP. */ + BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */ + BFA_STATUS_DPORT_ENOSYS = 254, /* Switch has no D_Port functionality */ + BFA_STATUS_DPORT_CANT_PERF = 255, /* Switch port is not D_Port capable + * or D_Port is disabled */ + BFA_STATUS_DPORT_LOGICALERR = 256, /* Switch D_Port fail */ + BFA_STATUS_DPORT_SWBUSY = 257, /* Switch port busy */ + BFA_STATUS_ERR_BBCR_SPEED_UNSUPPORT = 258, /*!< BB credit recovery is + * supported at max port speed alone */ + BFA_STATUS_ERROR_BBCR_ENABLED = 259, /*!< BB credit recovery + * is enabled */ + BFA_STATUS_INVALID_BBSCN = 260, /*!< Invalid BBSCN value. + * Valid range is [1-15] */ + BFA_STATUS_DDPORT_ERR = 261, /* Dynamic D_Port mode is active.\n To + * exit dynamic mode, disable D_Port on + * the remote port */ + BFA_STATUS_DPORT_SFPWRAP_ERR = 262, /* Clear e/o_wrap fail, check or + * replace SFP */ + BFA_STATUS_BBCR_CFG_NO_CHANGE = 265, /*!< BBCR is operational. + * Disable BBCR and try this operation again. */ + BFA_STATUS_DPORT_SW_NOTREADY = 268, /* Remote port is not ready to + * start dport test. Check remote + * port status. */ + BFA_STATUS_DPORT_INV_SFP = 271, /* Invalid SFP for D-PORT mode. */ + BFA_STATUS_DPORT_CMD_NOTSUPP = 273, /* Dport is not supported by + * remote port */ BFA_STATUS_MAX_VAL /* Unknown error code */ }; #define bfa_status_t enum bfa_status @@ -220,6 +266,7 @@ enum { BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */ BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */ BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */ + BFA_ADAPTER_UUID_LEN = 16, /* adapter uuid length */ }; struct bfa_adapter_attr_s { @@ -249,6 +296,11 @@ struct bfa_adapter_attr_s { u8 is_mezz; u8 trunk_capable; + u8 mfg_day; /* manufacturing day */ + u8 mfg_month; /* manufacturing month */ + u16 mfg_year; /* manufacturing year */ + u16 rsvd; + u8 uuid[BFA_ADAPTER_UUID_LEN]; }; /* @@ -362,7 +414,8 @@ struct bfa_ioc_attr_s { u8 port_mode; /* bfa_mode_s */ u8 cap_bm; /* capability */ u8 port_mode_cfg; /* bfa_mode_s */ - u8 rsvd[4]; /* 64bit align */ + u8 def_fn; /* 1 if default fn */ + u8 rsvd[3]; /* 64bit align */ }; /* @@ -585,6 +638,7 @@ enum { BFA_PCI_DEVICE_ID_CT = 0x14, BFA_PCI_DEVICE_ID_CT_FC = 0x21, BFA_PCI_DEVICE_ID_CT2 = 0x22, + BFA_PCI_DEVICE_ID_CT2_QUAD = 0x23, }; #define bfa_asic_id_cb(__d) \ @@ -593,7 +647,9 @@ enum { #define bfa_asic_id_ct(__d) \ ((__d) == BFA_PCI_DEVICE_ID_CT || \ (__d) == BFA_PCI_DEVICE_ID_CT_FC) -#define bfa_asic_id_ct2(__d) ((__d) == BFA_PCI_DEVICE_ID_CT2) +#define bfa_asic_id_ct2(__d) \ + ((__d) == BFA_PCI_DEVICE_ID_CT2 || \ + (__d) == BFA_PCI_DEVICE_ID_CT2_QUAD) #define bfa_asic_id_ctc(__d) \ (bfa_asic_id_ct(__d) || bfa_asic_id_ct2(__d)) @@ -722,7 +778,8 @@ struct bfa_ablk_cfg_pf_s { u8 rsvd[1]; u16 num_qpairs; u16 num_vectors; - u32 bw; + u16 bw_min; + u16 bw_max; }; struct bfa_ablk_cfg_port_s { @@ -889,11 +946,40 @@ struct sfp_diag_ext_s { u8 ext_status_ctl[2]; }; +/* + * Diagnostic: Data Fields -- Address A2h + * General Use Fields: User Writable Table - Features's Control Registers + * Total 32 bytes + */ +struct sfp_usr_eeprom_s { + u8 rsvd1[2]; /* 128-129 */ + u8 ewrap; /* 130 */ + u8 rsvd2[2]; /* */ + u8 owrap; /* 133 */ + u8 rsvd3[2]; /* */ + u8 prbs; /* 136: PRBS 7 generator */ + u8 rsvd4[2]; /* */ + u8 tx_eqz_16; /* 139: TX Equalizer (16xFC) */ + u8 tx_eqz_8; /* 140: TX Equalizer (8xFC) */ + u8 rsvd5[2]; /* */ + u8 rx_emp_16; /* 143: RX Emphasis (16xFC) */ + u8 rx_emp_8; /* 144: RX Emphasis (8xFC) */ + u8 rsvd6[2]; /* */ + u8 tx_eye_adj; /* 147: TX eye Threshold Adjust */ + u8 rsvd7[3]; /* */ + u8 tx_eye_qctl; /* 151: TX eye Quality Control */ + u8 tx_eye_qres; /* 152: TX eye Quality Result */ + u8 rsvd8[2]; /* */ + u8 poh[3]; /* 155-157: Power On Hours */ + u8 rsvd9[2]; /* */ +}; + struct sfp_mem_s { struct sfp_srlid_base_s srlid_base; struct sfp_srlid_ext_s srlid_ext; struct sfp_diag_base_s diag_base; struct sfp_diag_ext_s diag_ext; + struct sfp_usr_eeprom_s usr_eeprom; }; /* @@ -1067,6 +1153,7 @@ struct bfa_flash_attr_s { #define LB_PATTERN_DEFAULT 0xB5B5B5B5 #define QTEST_CNT_DEFAULT 10 #define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT +#define DPORT_ENABLE_LOOPCNT_DEFAULT (1024 * 1024) struct bfa_diag_memtest_s { u8 algo; @@ -1095,6 +1182,54 @@ struct bfa_diag_loopback_result_s { u8 rsvd[3]; }; +enum bfa_diag_dport_test_status { + DPORT_TEST_ST_IDLE = 0, /* the test has not started yet. */ + DPORT_TEST_ST_FINAL = 1, /* the test done successfully */ + DPORT_TEST_ST_SKIP = 2, /* the test skipped */ + DPORT_TEST_ST_FAIL = 3, /* the test failed */ + DPORT_TEST_ST_INPRG = 4, /* the testing is in progress */ + DPORT_TEST_ST_RESPONDER = 5, /* test triggered from remote port */ + DPORT_TEST_ST_STOPPED = 6, /* the test stopped by user. */ + DPORT_TEST_ST_MAX +}; + +enum bfa_diag_dport_test_type { + DPORT_TEST_ELOOP = 0, + DPORT_TEST_OLOOP = 1, + DPORT_TEST_ROLOOP = 2, + DPORT_TEST_LINK = 3, + DPORT_TEST_MAX +}; + +enum bfa_diag_dport_test_opmode { + BFA_DPORT_OPMODE_AUTO = 0, + BFA_DPORT_OPMODE_MANU = 1, +}; + +struct bfa_diag_dport_subtest_result_s { + u8 status; /* bfa_diag_dport_test_status */ + u8 rsvd[7]; /* 64bit align */ + u64 start_time; /* timestamp */ +}; + +struct bfa_diag_dport_result_s { + wwn_t rp_pwwn; /* switch port wwn */ + wwn_t rp_nwwn; /* switch node wwn */ + u64 start_time; /* user/sw start time */ + u64 end_time; /* timestamp */ + u8 status; /* bfa_diag_dport_test_status */ + u8 mode; /* bfa_diag_dport_test_opmode */ + u8 rsvd; /* 64bit align */ + u8 speed; /* link speed for buf_reqd */ + u16 buffer_required; + u16 frmsz; /* frame size for buf_reqd */ + u32 lpcnt; /* Frame count */ + u32 pat; /* Pattern */ + u32 roundtrip_latency; /* in nano sec */ + u32 est_cable_distance; /* in meter */ + struct bfa_diag_dport_subtest_result_s subtest[DPORT_TEST_MAX]; +}; + struct bfa_diag_ledtest_s { u32 cmd; /* bfa_led_op_t */ u32 color; /* bfa_led_color_t */ |