aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/arm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/arm')
-rw-r--r--drivers/scsi/arm/acornscsi.c55
-rw-r--r--drivers/scsi/arm/cumana_1.c5
-rw-r--r--drivers/scsi/arm/cumana_2.c2
-rw-r--r--drivers/scsi/arm/oak.c3
-rw-r--r--drivers/scsi/arm/powertec.c2
5 files changed, 4 insertions, 63 deletions
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 09ba1869d36..2e797a36760 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -62,13 +62,6 @@
*/
#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
/*
- * SCSI-II Linked command support.
- *
- * The higher level code doesn't support linked commands yet, and so the option
- * is undef'd here.
- */
-#undef CONFIG_SCSI_ACORNSCSI_LINK
-/*
* SCSI-II Synchronous transfer support.
*
* Tried and tested...
@@ -160,10 +153,6 @@
#error "Yippee! ABORT TAG is now defined! Remove this error!"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-#error SCSI2 LINKed commands not supported (yet)!
-#endif
-
#ifdef USE_DMAC
/*
* DMAC setup parameters
@@ -1668,42 +1657,6 @@ void acornscsi_message(AS_Host *host)
}
break;
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /*
- * We don't support linked commands yet
- */
- if (0) {
-#if (DEBUG & DEBUG_LINK)
- printk("scsi%d.%c: lun %d tag %d linked command complete\n",
- host->host->host_no, acornscsi_target(host), host->SCpnt->tag);
-#endif
- /*
- * A linked command should only terminate with one of these messages
- * if there are more linked commands available.
- */
- if (!host->SCpnt->next_link) {
- printk(KERN_WARNING "scsi%d.%c: lun %d tag %d linked command complete, but no next_link\n",
- instance->host_no, acornscsi_target(host), host->SCpnt->tag);
- acornscsi_sbic_issuecmd(host, CMND_ASSERTATN);
- msgqueue_addmsg(&host->scsi.msgs, 1, ABORT);
- } else {
- struct scsi_cmnd *SCpnt = host->SCpnt;
-
- acornscsi_dma_cleanup(host);
-
- host->SCpnt = host->SCpnt->next_link;
- host->SCpnt->tag = SCpnt->tag;
- SCpnt->result = DID_OK | host->scsi.SCp.Message << 8 | host->Scsi.SCp.Status;
- SCpnt->done(SCpnt);
-
- /* initialise host->SCpnt->SCp */
- }
- break;
- }
-#endif
-
default: /* reject message */
printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n",
host->host->host_no, acornscsi_target(host),
@@ -2825,9 +2778,6 @@ char *acornscsi_info(struct Scsi_Host *host)
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
" NOWRITE (" __stringify(NO_WRITE) ")"
#endif
@@ -2851,9 +2801,6 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance)
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
" NOWRITE (" __stringify(NO_WRITE) ")"
#endif
@@ -2971,7 +2918,7 @@ static int acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ec->irqaddr = ashost->fast + INT_REG;
ec->irqmask = 0x0a;
- ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
+ ret = request_irq(host->irq, acornscsi_intr, 0, "acornscsi", ashost);
if (ret) {
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
host->host_no, ashost->scsi.irq, ret);
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index b679778376c..8ef810a4476 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -36,9 +36,6 @@
void __iomem *base; \
void __iomem *dma
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
void cumanascsi_setup(char *str, int *ints)
@@ -262,7 +259,7 @@ static int cumanascsi1_probe(struct expansion_card *ec,
goto out_unmap;
}
- ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
+ ret = request_irq(host->irq, cumanascsi_intr, 0,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 58915f29055..abc66f5263e 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -431,7 +431,7 @@ static int cumanascsi2_probe(struct expansion_card *ec,
goto out_free;
ret = request_irq(ec->irq, cumanascsi_2_intr,
- IRQF_DISABLED, "cumanascsi2", info);
+ 0, "cumanascsi2", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 4266eef8aca..188e734c7ff 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -37,9 +37,6 @@
#define NCR5380_implementation_fields \
void __iomem *base
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index abc9593615e..5e1b73e1b74 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -358,7 +358,7 @@ static int powertecscsi_probe(struct expansion_card *ec,
goto out_free;
ret = request_irq(ec->irq, powertecscsi_intr,
- IRQF_DISABLED, "powertec", info);
+ 0, "powertec", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 22:24:38 +0000