aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/arm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/arm')
-rw-r--r--drivers/scsi/arm/Kconfig12
-rw-r--r--drivers/scsi/arm/acornscsi-io.S17
-rw-r--r--drivers/scsi/arm/acornscsi.c552
-rw-r--r--drivers/scsi/arm/acornscsi.h15
-rw-r--r--drivers/scsi/arm/arxescsi.c49
-rw-r--r--drivers/scsi/arm/cumana_1.c16
-rw-r--r--drivers/scsi/arm/cumana_2.c58
-rw-r--r--drivers/scsi/arm/eesox.c54
-rw-r--r--drivers/scsi/arm/fas216.c57
-rw-r--r--drivers/scsi/arm/fas216.h38
-rw-r--r--drivers/scsi/arm/oak.c18
-rw-r--r--drivers/scsi/arm/powertec.c44
12 files changed, 348 insertions, 582 deletions
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 7236143941f..cfd172a439c 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI && BROKEN
+ depends on ARCH_ACORN && SCSI
select SCSI_SPI_ATTRS
help
This enables support for the Acorn SCSI card (aka30). If you have an
@@ -64,19 +64,19 @@ config SCSI_POWERTECSCSI
you have one of these, say Y. If unsure, say N.
comment "The following drivers are not fully supported"
- depends on ARCH_ACORN && EXPERIMENTAL
+ depends on ARCH_ACORN
config SCSI_CUMANA_1
- tristate "CumanaSCSI I support (EXPERIMENTAL)"
- depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ tristate "CumanaSCSI I support"
+ depends on ARCH_ACORN && SCSI
select SCSI_SPI_ATTRS
help
This enables support for the Cumana SCSI I card. If you have an
Acorn system with one of these, say Y. If unsure, say N.
config SCSI_OAK1
- tristate "Oak SCSI support (EXPERIMENTAL)"
- depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ tristate "Oak SCSI support"
+ depends on ARCH_ACORN && SCSI
select SCSI_SPI_ATTRS
help
This enables support for the Oak SCSI card. If you have an Acorn
diff --git a/drivers/scsi/arm/acornscsi-io.S b/drivers/scsi/arm/acornscsi-io.S
index 93467e6ac92..22171b2110a 100644
--- a/drivers/scsi/arm/acornscsi-io.S
+++ b/drivers/scsi/arm/acornscsi-io.S
@@ -8,19 +8,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
-#if (IO_BASE == (PCIO_BASE & 0xff000000))
-#define ADDR(off,reg) \
- tst off, $0x80000000 ;\
- mov reg, $IO_BASE ;\
- orreq reg, reg, $(PCIO_BASE & 0x00ff0000)
-#else
-#define ADDR(off,reg) \
- tst off, $0x80000000 ;\
- movne reg, $IO_BASE ;\
- moveq reg, $(PCIO_BASE & 0xff000000) ;\
- orreq reg, reg, $(PCIO_BASE & 0x00ff0000)
+#if defined(__APCS_32__)
+#define LOADREGS(t,r,l...) ldm##t r, l
+#elif defined(__APCS_26__)
+#define LOADREGS(t,r,l...) ldm##t r, l##^
#endif
@ Purpose: transfer a block of data from the acorn scsi card to memory
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 3bedf2466bd..2e797a36760 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -62,13 +62,6 @@
*/
#undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
/*
- * SCSI-II Linked command support.
- *
- * The higher level code doesn't support linked commands yet, and so the option
- * is undef'd here.
- */
-#undef CONFIG_SCSI_ACORNSCSI_LINK
-/*
* SCSI-II Synchronous transfer support.
*
* Tried and tested...
@@ -100,7 +93,7 @@
*/
#define TIMEOUT_TIME 10
/*
- * Define this if you want to have verbose explaination of SCSI
+ * Define this if you want to have verbose explanation of SCSI
* status/messages.
*/
#undef CONFIG_ACORNSCSI_CONSTANTS
@@ -123,12 +116,6 @@
#define DBG(cmd,xxx...) xxx
#endif
-#ifndef STRINGIFY
-#define STRINGIFY(x) #x
-#endif
-#define STRx(x) STRINGIFY(x)
-#define NO_WRITE_STR STRx(NO_WRITE)
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -141,9 +128,9 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/stringify.h>
+#include <linux/io.h>
-#include <asm/system.h>
-#include <asm/io.h>
#include <asm/ecard.h>
#include "../scsi.h"
@@ -166,10 +153,6 @@
#error "Yippee! ABORT TAG is now defined! Remove this error!"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-#error SCSI2 LINKed commands not supported (yet)!
-#endif
-
#ifdef USE_DMAC
/*
* DMAC setup parameters
@@ -203,44 +186,46 @@ static void acornscsi_abortcmd(AS_Host *host, unsigned char tag);
* Miscellaneous
*/
-static inline void
-sbic_arm_write(unsigned int io_port, int reg, int value)
+/* Offsets from MEMC base */
+#define SBIC_REGIDX 0x2000
+#define SBIC_REGVAL 0x2004
+#define DMAC_OFFSET 0x3000
+
+/* Offsets from FAST IOC base */
+#define INT_REG 0x2000
+#define PAGE_REG 0x3000
+
+static inline void sbic_arm_write(AS_Host *host, unsigned int reg, unsigned int value)
{
- __raw_writeb(reg, io_port);
- __raw_writeb(value, io_port + 4);
+ writeb(reg, host->base + SBIC_REGIDX);
+ writeb(value, host->base + SBIC_REGVAL);
}
-#define sbic_arm_writenext(io,val) \
- __raw_writeb((val), (io) + 4)
-
-static inline
-int sbic_arm_read(unsigned int io_port, int reg)
+static inline int sbic_arm_read(AS_Host *host, unsigned int reg)
{
if(reg == SBIC_ASR)
- return __raw_readl(io_port) & 255;
- __raw_writeb(reg, io_port);
- return __raw_readl(io_port + 4) & 255;
+ return readl(host->base + SBIC_REGIDX) & 255;
+ writeb(reg, host->base + SBIC_REGIDX);
+ return readl(host->base + SBIC_REGVAL) & 255;
}
-#define sbic_arm_readnext(io) \
- __raw_readb((io) + 4)
+#define sbic_arm_writenext(host, val) writeb((val), (host)->base + SBIC_REGVAL)
+#define sbic_arm_readnext(host) readb((host)->base + SBIC_REGVAL)
#ifdef USE_DMAC
-#define dmac_read(io_port,reg) \
- inb((io_port) + (reg))
+#define dmac_read(host,reg) \
+ readb((host)->base + DMAC_OFFSET + ((reg) << 2))
-#define dmac_write(io_port,reg,value) \
- ({ outb((value), (io_port) + (reg)); })
+#define dmac_write(host,reg,value) \
+ ({ writeb((value), (host)->base + DMAC_OFFSET + ((reg) << 2)); })
-#define dmac_clearintr(io_port) \
- ({ outb(0, (io_port)); })
+#define dmac_clearintr(host) writeb(0, (host)->fast + INT_REG)
-static inline
-unsigned int dmac_address(unsigned int io_port)
+static inline unsigned int dmac_address(AS_Host *host)
{
- return dmac_read(io_port, DMAC_TXADRHI) << 16 |
- dmac_read(io_port, DMAC_TXADRMD) << 8 |
- dmac_read(io_port, DMAC_TXADRLO);
+ return dmac_read(host, DMAC_TXADRHI) << 16 |
+ dmac_read(host, DMAC_TXADRMD) << 8 |
+ dmac_read(host, DMAC_TXADRLO);
}
static
@@ -248,15 +233,15 @@ void acornscsi_dumpdma(AS_Host *host, char *where)
{
unsigned int mode, addr, len;
- mode = dmac_read(host->dma.io_port, DMAC_MODECON);
- addr = dmac_address(host->dma.io_port);
- len = dmac_read(host->dma.io_port, DMAC_TXCNTHI) << 8 |
- dmac_read(host->dma.io_port, DMAC_TXCNTLO);
+ mode = dmac_read(host, DMAC_MODECON);
+ addr = dmac_address(host);
+ len = dmac_read(host, DMAC_TXCNTHI) << 8 |
+ dmac_read(host, DMAC_TXCNTLO);
printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ",
host->host->host_no, where,
mode, addr, (len + 1) & 0xffff,
- dmac_read(host->dma.io_port, DMAC_MASKREG));
+ dmac_read(host, DMAC_MASKREG));
printk("DMA @%06x, ", host->dma.start_addr);
printk("BH @%p +%04x, ", host->scsi.SCp.ptr,
@@ -272,9 +257,9 @@ unsigned long acornscsi_sbic_xfcount(AS_Host *host)
{
unsigned long length;
- length = sbic_arm_read(host->scsi.io_port, SBIC_TRANSCNTH) << 16;
- length |= sbic_arm_readnext(host->scsi.io_port) << 8;
- length |= sbic_arm_readnext(host->scsi.io_port);
+ length = sbic_arm_read(host, SBIC_TRANSCNTH) << 16;
+ length |= sbic_arm_readnext(host) << 8;
+ length |= sbic_arm_readnext(host);
return length;
}
@@ -285,7 +270,7 @@ acornscsi_sbic_wait(AS_Host *host, int stat_mask, int stat, int timeout, char *m
int asr;
do {
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if ((asr & stat_mask) == stat)
return 0;
@@ -304,7 +289,7 @@ int acornscsi_sbic_issuecmd(AS_Host *host, int command)
if (acornscsi_sbic_wait(host, ASR_CIP, 0, 1000, "issuing command"))
return -1;
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, command);
+ sbic_arm_write(host, SBIC_CMND, command);
return 0;
}
@@ -331,20 +316,20 @@ void acornscsi_resetcard(AS_Host *host)
/* assert reset line */
host->card.page_reg = 0x80;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/* wait 3 cs. SCSI standard says 25ms. */
acornscsi_csdelay(3);
host->card.page_reg = 0;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/*
* Should get a reset from the card
*/
timeout = 1000;
do {
- if (inb(host->card.io_intr) & 8)
+ if (readb(host->fast + INT_REG) & 8)
break;
udelay(1);
} while (--timeout);
@@ -353,19 +338,19 @@ void acornscsi_resetcard(AS_Host *host)
printk("scsi%d: timeout while resetting card\n",
host->host->host_no);
- sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_ASR);
+ sbic_arm_read(host, SBIC_SSR);
/* setup sbic - WD33C93A */
- sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+ sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+ sbic_arm_write(host, SBIC_CMND, CMND_RESET);
/*
* Command should cause a reset interrupt
*/
timeout = 1000;
do {
- if (inb(host->card.io_intr) & 8)
+ if (readb(host->fast + INT_REG) & 8)
break;
udelay(1);
} while (--timeout);
@@ -374,26 +359,26 @@ void acornscsi_resetcard(AS_Host *host)
printk("scsi%d: timeout while resetting card\n",
host->host->host_no);
- sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- if (sbic_arm_read(host->scsi.io_port, SBIC_SSR) != 0x01)
+ sbic_arm_read(host, SBIC_ASR);
+ if (sbic_arm_read(host, SBIC_SSR) != 0x01)
printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n",
host->host->host_no);
- sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
- sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+ sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
host->card.page_reg = 0x40;
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
/* setup dmac - uPC71071 */
- dmac_write(host->dma.io_port, DMAC_INIT, 0);
+ dmac_write(host, DMAC_INIT, 0);
#ifdef USE_DMAC
- dmac_write(host->dma.io_port, DMAC_INIT, INIT_8BIT);
- dmac_write(host->dma.io_port, DMAC_CHANNEL, CHANNEL_0);
- dmac_write(host->dma.io_port, DMAC_DEVCON0, INIT_DEVCON0);
- dmac_write(host->dma.io_port, DMAC_DEVCON1, INIT_DEVCON1);
+ dmac_write(host, DMAC_INIT, INIT_8BIT);
+ dmac_write(host, DMAC_CHANNEL, CHANNEL_0);
+ dmac_write(host, DMAC_DEVCON0, INIT_DEVCON0);
+ dmac_write(host, DMAC_DEVCON1, INIT_DEVCON1);
#endif
host->SCpnt = NULL;
@@ -741,9 +726,9 @@ intr_ret_t acornscsi_kick(AS_Host *host)
* If we have an interrupt pending, then we may have been reselected.
* In this case, we don't want to write to the registers
*/
- if (!(sbic_arm_read(host->scsi.io_port, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
- sbic_arm_write(host->scsi.io_port, SBIC_DESTID, SCpnt->device->id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_SELWITHATN);
+ if (!(sbic_arm_read(host, SBIC_ASR) & (ASR_INT|ASR_BSY|ASR_CIP))) {
+ sbic_arm_write(host, SBIC_DESTID, SCpnt->device->id);
+ sbic_arm_write(host, SBIC_CMND, CMND_SELWITHATN);
}
/*
@@ -807,7 +792,7 @@ static void acornscsi_done(AS_Host *host, struct scsi_cmnd **SCpntp,
struct scsi_cmnd *SCpnt = *SCpntp;
/* clean up */
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
host->stats.fins += 1;
@@ -918,13 +903,13 @@ static
void acornscsi_data_read(AS_Host *host, char *ptr,
unsigned int start_addr, unsigned int length)
{
- extern void __acornscsi_in(int port, char *buf, int len);
+ extern void __acornscsi_in(void __iomem *, char *buf, int len);
unsigned int page, offset, len = length;
page = (start_addr >> 12);
offset = start_addr & ((1 << 12) - 1);
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
while (len > 0) {
unsigned int this_len;
@@ -934,7 +919,7 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
else
this_len = len;
- __acornscsi_in(host->card.io_ram + (offset << 1), ptr, this_len);
+ __acornscsi_in(host->base + (offset << 1), ptr, this_len);
offset += this_len;
ptr += this_len;
@@ -943,10 +928,10 @@ void acornscsi_data_read(AS_Host *host, char *ptr,
if (offset == (1 << 12)) {
offset = 0;
page ++;
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
}
}
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
}
/*
@@ -963,13 +948,13 @@ static
void acornscsi_data_write(AS_Host *host, char *ptr,
unsigned int start_addr, unsigned int length)
{
- extern void __acornscsi_out(int port, char *buf, int len);
+ extern void __acornscsi_out(void __iomem *, char *buf, int len);
unsigned int page, offset, len = length;
page = (start_addr >> 12);
offset = start_addr & ((1 << 12) - 1);
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
while (len > 0) {
unsigned int this_len;
@@ -979,7 +964,7 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
else
this_len = len;
- __acornscsi_out(host->card.io_ram + (offset << 1), ptr, this_len);
+ __acornscsi_out(host->base + (offset << 1), ptr, this_len);
offset += this_len;
ptr += this_len;
@@ -988,10 +973,10 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
if (offset == (1 << 12)) {
offset = 0;
page ++;
- outb((page & 0x3f) | host->card.page_reg, host->card.io_page);
+ writeb((page & 0x3f) | host->card.page_reg, host->fast + PAGE_REG);
}
}
- outb(host->card.page_reg, host->card.io_page);
+ writeb(host->card.page_reg, host->fast + PAGE_REG);
}
/* =========================================================================================
@@ -1008,8 +993,8 @@ void acornscsi_data_write(AS_Host *host, char *ptr,
static inline
void acornscsi_dma_stop(AS_Host *host)
{
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "stop"));
@@ -1031,7 +1016,7 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
host->dma.direction = direction;
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
if (direction == DMA_OUT) {
#if (DEBUG & DEBUG_NO_WRITE)
@@ -1062,13 +1047,13 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
length);
length -= 1;
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MODECON, mode);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, length);
+ dmac_write(host, DMAC_TXCNTHI, length >> 8);
+ dmac_write(host, DMAC_TXADRLO, address);
+ dmac_write(host, DMAC_TXADRMD, address >> 8);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MODECON, mode);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "strt"));
@@ -1088,8 +1073,8 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
static
void acornscsi_dma_cleanup(AS_Host *host)
{
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
/*
* Check for a pending transfer
@@ -1116,7 +1101,7 @@ void acornscsi_dma_cleanup(AS_Host *host)
/*
* Calculate number of bytes transferred from DMA.
*/
- transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+ transferred = dmac_address(host) - host->dma.start_addr;
host->dma.transferred += transferred;
if (host->dma.direction == DMA_IN)
@@ -1152,13 +1137,13 @@ void acornscsi_dma_intr(AS_Host *host)
DBG(host->SCpnt, acornscsi_dumpdma(host, "inti"));
#endif
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_ON);
- dmac_clearintr(host->dma.io_intr_clear);
+ dmac_write(host, DMAC_MASKREG, MASK_ON);
+ dmac_clearintr(host);
/*
* Calculate amount transferred via DMA
*/
- transferred = dmac_address(host->dma.io_port) - host->dma.start_addr;
+ transferred = dmac_address(host) - host->dma.start_addr;
host->dma.transferred += transferred;
/*
@@ -1190,12 +1175,12 @@ void acornscsi_dma_intr(AS_Host *host)
length);
length -= 1;
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, length);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, length >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, address);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, address >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, length);
+ dmac_write(host, DMAC_TXCNTHI, length >> 8);
+ dmac_write(host, DMAC_TXADRLO, address);
+ dmac_write(host, DMAC_TXADRMD, address >> 8);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
#if (DEBUG & DEBUG_DMA)
DBG(host->SCpnt, acornscsi_dumpdma(host, "into"));
@@ -1209,15 +1194,15 @@ void acornscsi_dma_intr(AS_Host *host)
* attention condition. We continue giving one byte until
* the device recognises the attention.
*/
- if (dmac_read(host->dma.io_port, DMAC_STATUS) & STATUS_RQ0) {
+ if (dmac_read(host, DMAC_STATUS) & STATUS_RQ0) {
acornscsi_abortcmd(host, host->SCpnt->tag);
- dmac_write(host->dma.io_port, DMAC_TXCNTLO, 0);
- dmac_write(host->dma.io_port, DMAC_TXCNTHI, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRLO, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, 0);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, 0);
- dmac_write(host->dma.io_port, DMAC_MASKREG, MASK_OFF);
+ dmac_write(host, DMAC_TXCNTLO, 0);
+ dmac_write(host, DMAC_TXCNTHI, 0);
+ dmac_write(host, DMAC_TXADRLO, 0);
+ dmac_write(host, DMAC_TXADRMD, 0);
+ dmac_write(host, DMAC_TXADRHI, 0);
+ dmac_write(host, DMAC_MASKREG, MASK_OFF);
}
#endif
}
@@ -1271,9 +1256,9 @@ void acornscsi_dma_adjust(AS_Host *host)
host->dma.xfer_setup = 0;
else {
transferred += host->dma.start_addr;
- dmac_write(host->dma.io_port, DMAC_TXADRLO, transferred);
- dmac_write(host->dma.io_port, DMAC_TXADRMD, transferred >> 8);
- dmac_write(host->dma.io_port, DMAC_TXADRHI, transferred >> 16);
+ dmac_write(host, DMAC_TXADRLO, transferred);
+ dmac_write(host, DMAC_TXADRMD, transferred >> 8);
+ dmac_write(host, DMAC_TXADRHI, transferred >> 16);
#if (DEBUG & (DEBUG_DMA|DEBUG_WRITE))
DBG(host->SCpnt, acornscsi_dumpdma(host, "adjo"));
#endif
@@ -1292,12 +1277,12 @@ acornscsi_write_pio(AS_Host *host, char *bytes, int *ptr, int len, unsigned int
int my_ptr = *ptr;
while (my_ptr < len) {
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (asr & ASR_DBR) {
timeout = max_timeout;
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, bytes[my_ptr++]);
+ sbic_arm_write(host, SBIC_DATA, bytes[my_ptr++]);
} else if (asr & ASR_INT)
break;
else if (--timeout == 0)
@@ -1320,9 +1305,9 @@ acornscsi_sendcommand(AS_Host *host)
{
struct scsi_cmnd *SCpnt = host->SCpnt;
- sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
- sbic_arm_writenext(host->scsi.io_port, 0);
- sbic_arm_writenext(host->scsi.io_port, SCpnt->cmd_len - host->scsi.SCp.sent_command);
+ sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+ sbic_arm_writenext(host, 0);
+ sbic_arm_writenext(host, SCpnt->cmd_len - host->scsi.SCp.sent_command);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
@@ -1351,7 +1336,7 @@ void acornscsi_sendmessage(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 1");
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, NOP);
+ sbic_arm_write(host, SBIC_DATA, NOP);
host->scsi.last_message = NOP;
#if (DEBUG & DEBUG_MESSAGES)
@@ -1365,7 +1350,7 @@ void acornscsi_sendmessage(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "sending message 2");
- sbic_arm_write(host->scsi.io_port, SBIC_DATA, msg->msg[0]);
+ sbic_arm_write(host, SBIC_DATA, msg->msg[0]);
host->scsi.last_message = msg->msg[0];
#if (DEBUG & DEBUG_MESSAGES)
@@ -1382,9 +1367,9 @@ void acornscsi_sendmessage(AS_Host *host)
* initiator. This provides an interlock so that the
* initiator can determine which message byte is rejected.
*/
- sbic_arm_write(host->scsi.io_port, SBIC_TRANSCNTH, 0);
- sbic_arm_writenext(host->scsi.io_port, 0);
- sbic_arm_writenext(host->scsi.io_port, message_length);
+ sbic_arm_write(host, SBIC_TRANSCNTH, 0);
+ sbic_arm_writenext(host, 0);
+ sbic_arm_writenext(host, message_length);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
msgnr = 0;
@@ -1421,7 +1406,7 @@ void acornscsi_readstatusbyte(AS_Host *host)
{
acornscsi_sbic_issuecmd(host, CMND_XFERINFO|CMND_SBT);
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "reading status byte");
- host->scsi.SCp.Status = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+ host->scsi.SCp.Status = sbic_arm_read(host, SBIC_DATA);
}
/*
@@ -1438,12 +1423,12 @@ unsigned char acornscsi_readmessagebyte(AS_Host *host)
acornscsi_sbic_wait(host, ASR_DBR, ASR_DBR, 1000, "for message byte");
- message = sbic_arm_read(host->scsi.io_port, SBIC_DATA);
+ message = sbic_arm_read(host, SBIC_DATA);
/* wait for MSGIN-XFER-PAUSED */
acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after message byte");
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_SSR);
return message;
}
@@ -1480,7 +1465,7 @@ void acornscsi_message(AS_Host *host)
/* wait for next msg-in */
acornscsi_sbic_wait(host, ASR_INT, ASR_INT, 1000, "for interrupt after negate ack");
- sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ sbic_arm_read(host, SBIC_SSR);
}
} while (msgidx < msglen);
@@ -1564,7 +1549,7 @@ void acornscsi_message(AS_Host *host)
/*
* If we were negociating sync transfer, we don't yet know if
* this REJECT is for the sync transfer or for the tagged queue/wide
- * transfer. Re-initiate sync transfer negociation now, and if
+ * transfer. Re-initiate sync transfer negotiation now, and if
* we got a REJECT in response to SDTR, then it'll be set to DONE.
*/
if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST)
@@ -1602,7 +1587,7 @@ void acornscsi_message(AS_Host *host)
host->host->host_no, acornscsi_target(host));
host->device[host->SCpnt->device->id].sync_xfer = SYNCHTRANSFER_2DBA;
host->device[host->SCpnt->device->id].sync_state = SYNC_ASYNCHRONOUS;
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
break;
default:
@@ -1652,7 +1637,7 @@ void acornscsi_message(AS_Host *host)
host->device[host->SCpnt->device->id].sync_xfer =
calc_sync_xfer(period * 4, length);
}
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
break;
#else
/* We do not accept synchronous transfers. Respond with a
@@ -1672,42 +1657,6 @@ void acornscsi_message(AS_Host *host)
}
break;
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /*
- * We don't support linked commands yet
- */
- if (0) {
-#if (DEBUG & DEBUG_LINK)
- printk("scsi%d.%c: lun %d tag %d linked command complete\n",
- host->host->host_no, acornscsi_target(host), host->SCpnt->tag);
-#endif
- /*
- * A linked command should only terminate with one of these messages
- * if there are more linked commands available.
- */
- if (!host->SCpnt->next_link) {
- printk(KERN_WARNING "scsi%d.%c: lun %d tag %d linked command complete, but no next_link\n",
- instance->host_no, acornscsi_target(host), host->SCpnt->tag);
- acornscsi_sbic_issuecmd(host, CMND_ASSERTATN);
- msgqueue_addmsg(&host->scsi.msgs, 1, ABORT);
- } else {
- struct scsi_cmnd *SCpnt = host->SCpnt;
-
- acornscsi_dma_cleanup(host);
-
- host->SCpnt = host->SCpnt->next_link;
- host->SCpnt->tag = SCpnt->tag;
- SCpnt->result = DID_OK | host->scsi.SCp.Message << 8 | host->Scsi.SCp.Status;
- SCpnt->done(SCpnt);
-
- /* initialise host->SCpnt->SCp */
- }
- break;
- }
-#endif
-
default: /* reject message */
printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n",
host->host->host_no, acornscsi_target(host),
@@ -1792,10 +1741,10 @@ int acornscsi_starttransfer(AS_Host *host)
residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred;
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
- sbic_arm_writenext(host->scsi.io_port, residual >> 16);
- sbic_arm_writenext(host->scsi.io_port, residual >> 8);
- sbic_arm_writenext(host->scsi.io_port, residual);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
+ sbic_arm_writenext(host, residual >> 16);
+ sbic_arm_writenext(host, residual >> 8);
+ sbic_arm_writenext(host, residual);
acornscsi_sbic_issuecmd(host, CMND_XFERINFO);
return 1;
}
@@ -1816,7 +1765,7 @@ int acornscsi_reconnect(AS_Host *host)
{
unsigned int target, lun, ok = 0;
- target = sbic_arm_read(host->scsi.io_port, SBIC_SOURCEID);
+ target = sbic_arm_read(host, SBIC_SOURCEID);
if (!(target & 8))
printk(KERN_ERR "scsi%d: invalid source id after reselection "
@@ -1832,7 +1781,7 @@ int acornscsi_reconnect(AS_Host *host)
host->SCpnt = NULL;
}
- lun = sbic_arm_read(host->scsi.io_port, SBIC_DATA) & 7;
+ lun = sbic_arm_read(host, SBIC_DATA) & 7;
host->scsi.reconnected.target = target;
host->scsi.reconnected.lun = lun;
@@ -1952,7 +1901,7 @@ static
void acornscsi_abortcmd(AS_Host *host, unsigned char tag)
{
host->scsi.phase = PHASE_ABORTED;
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_ASSERTATN);
+ sbic_arm_write(host, SBIC_CMND, CMND_ASSERTATN);
msgqueue_flush(&host->scsi.msgs);
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
@@ -1979,11 +1928,11 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
{
unsigned int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (!(asr & ASR_INT))
return INTR_IDLE;
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
#if (DEBUG & DEBUG_PHASES)
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -1999,15 +1948,15 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n",
host->host->host_no);
/* setup sbic - WD33C93A */
- sbic_arm_write(host->scsi.io_port, SBIC_OWNID, OWNID_EAF | host->host->this_id);
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_RESET);
+ sbic_arm_write(host, SBIC_OWNID, OWNID_EAF | host->host->this_id);
+ sbic_arm_write(host, SBIC_CMND, CMND_RESET);
return INTR_IDLE;
case 0x01: /* reset state - advanced */
- sbic_arm_write(host->scsi.io_port, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
- sbic_arm_write(host->scsi.io_port, SBIC_TIMEOUT, TIMEOUT_TIME);
- sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
- sbic_arm_write(host->scsi.io_port, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
+ sbic_arm_write(host, SBIC_CTRL, INIT_SBICDMA | CTRL_IDI);
+ sbic_arm_write(host, SBIC_TIMEOUT, TIMEOUT_TIME);
+ sbic_arm_write(host, SBIC_SYNCHTRANSFER, SYNCHTRANSFER_2DBA);
+ sbic_arm_write(host, SBIC_SOURCEID, SOURCEID_ER | SOURCEID_DSP);
msgqueue_flush(&host->scsi.msgs);
return INTR_IDLE;
@@ -2025,10 +1974,10 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
msgqueue_flush(&host->scsi.msgs);
host->dma.transferred = host->scsi.SCp.scsi_xferred;
/* 33C93 gives next interrupt indicating bus phase */
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
+ asr = sbic_arm_read(host, SBIC_ASR);
if (!(asr & ASR_INT))
break;
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
ADD_STATUS(8, ssr, host->scsi.phase, 1);
ADD_STATUS(host->SCpnt->device->id, ssr, host->scsi.phase, 1);
goto connected;
@@ -2476,11 +2425,11 @@ acornscsi_intr(int irq, void *dev_id)
do {
ret = INTR_IDLE;
- iostatus = inb(host->card.io_intr);
+ iostatus = readb(host->fast + INT_REG);
if (iostatus & 2) {
acornscsi_dma_intr(host);
- iostatus = inb(host->card.io_intr);
+ iostatus = readb(host->fast + INT_REG);
}
if (iostatus & 8)
@@ -2514,7 +2463,7 @@ acornscsi_intr(int irq, void *dev_id)
* done - function called on completion, with pointer to command descriptor
* Returns : 0, or < 0 on error.
*/
-int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
+static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
@@ -2564,6 +2513,8 @@ int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
return 0;
}
+DEF_SCSI_QCMD(acornscsi_queuecmd)
+
/*
* Prototype: void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, struct scsi_cmnd **SCpntp2, int result)
* Purpose : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2
@@ -2655,7 +2606,7 @@ static enum res_abort acornscsi_do_abort(AS_Host *host, struct scsi_cmnd *SCpnt)
* busylun bit.
*/
case PHASE_CONNECTED:
- sbic_arm_write(host->scsi.io_port, SBIC_CMND, CMND_DISCONNECT);
+ sbic_arm_write(host, SBIC_CMND, CMND_DISCONNECT);
host->SCpnt = NULL;
res = res_success_clear;
break;
@@ -2699,8 +2650,8 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
#if (DEBUG & DEBUG_ABORT)
{
int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ asr = sbic_arm_read(host, SBIC_ASR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
printk(KERN_WARNING "acornscsi_abort: ");
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2731,9 +2682,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
//#if (DEBUG & DEBUG_ABORT)
printk("success\n");
//#endif
- SCpnt->result = DID_ABORT << 16;
- SCpnt->scsi_done(SCpnt);
- result = SCSI_ABORT_SUCCESS;
+ result = SUCCESS;
break;
/*
@@ -2745,7 +2694,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
//#if (DEBUG & DEBUG_ABORT)
printk("snooze\n");
//#endif
- result = SCSI_ABORT_SNOOZE;
+ result = FAILED;
break;
/*
@@ -2755,11 +2704,7 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
default:
case res_not_running:
acornscsi_dumplog(host, SCpnt->device->id);
-#if (DEBUG & DEBUG_ABORT)
- result = SCSI_ABORT_SNOOZE;
-#else
- result = SCSI_ABORT_NOT_RUNNING;
-#endif
+ result = FAILED;
//#if (DEBUG & DEBUG_ABORT)
printk("not running\n");
//#endif
@@ -2770,13 +2715,12 @@ int acornscsi_abort(struct scsi_cmnd *SCpnt)
}
/*
- * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+ * Prototype: int acornscsi_reset(struct scsi_cmnd *SCpnt)
* Purpose : reset a command on this host/reset this host
* Params : SCpnt - command causing reset
- * result - what type of reset to perform
* Returns : one of SCSI_RESET_ macros
*/
-int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
+int acornscsi_bus_reset(struct scsi_cmnd *SCpnt)
{
AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
struct scsi_cmnd *SCptr;
@@ -2787,8 +2731,8 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
{
int asr, ssr;
- asr = sbic_arm_read(host->scsi.io_port, SBIC_ASR);
- ssr = sbic_arm_read(host->scsi.io_port, SBIC_SSR);
+ asr = sbic_arm_read(host, SBIC_ASR);
+ ssr = sbic_arm_read(host, SBIC_SSR);
printk(KERN_WARNING "acornscsi_reset: ");
print_sbic_status(asr, ssr, host->scsi.phase);
@@ -2798,28 +2742,16 @@ int acornscsi_reset(struct scsi_cmnd *SCpnt, unsigned int reset_flags)
acornscsi_dma_stop(host);
- SCptr = host->SCpnt;
-
/*
* do hard reset. This resets all devices on this host, and so we
* must set the reset status on all commands.
*/
acornscsi_resetcard(host);
- /*
- * report reset on commands current connected/disconnected
- */
- acornscsi_reportstatus(&host->SCpnt, &SCptr, DID_RESET);
-
while ((SCptr = queue_remove(&host->queues.disconnected)) != NULL)
- acornscsi_reportstatus(&SCptr, &SCpnt, DID_RESET);
-
- if (SCpnt) {
- SCpnt->result = DID_RESET << 16;
- SCpnt->scsi_done(SCpnt);
- }
+ ;
- return SCSI_RESET_BUS_RESET | SCSI_RESET_HOST_RESET | SCSI_RESET_SUCCESS;
+ return SUCCESS;
}
/*==============================================================================================
@@ -2846,53 +2778,42 @@ char *acornscsi_info(struct Scsi_Host *host)
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
- " NOWRITE ("NO_WRITE_STR")"
+ " NOWRITE (" __stringify(NO_WRITE) ")"
#endif
, host->hostt->name, host->io_port, host->irq,
VER_MAJOR, VER_MINOR, VER_PATCH);
return string;
}
-int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start, off_t offset,
- int length, int inout)
+static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance)
{
- int pos, begin = 0, devidx;
+ int devidx;
struct scsi_device *scd;
AS_Host *host;
- char *p = buffer;
-
- if (inout == 1)
- return -EINVAL;
host = (AS_Host *)instance->hostdata;
- p += sprintf(p, "AcornSCSI driver v%d.%d.%d"
+ seq_printf(m, "AcornSCSI driver v%d.%d.%d"
#ifdef CONFIG_SCSI_ACORNSCSI_SYNC
" SYNC"
#endif
#ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
" TAG"
#endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
- " LINK"
-#endif
#if (DEBUG & DEBUG_NO_WRITE)
- " NOWRITE ("NO_WRITE_STR")"
+ " NOWRITE (" __stringify(NO_WRITE) ")"
#endif
"\n\n", VER_MAJOR, VER_MINOR, VER_PATCH);
- p += sprintf(p, "SBIC: WD33C93A Address: %08X IRQ : %d\n",
- host->scsi.io_port, host->scsi.irq);
+ seq_printf(m, "SBIC: WD33C93A Address: %p IRQ : %d\n",
+ host->base + SBIC_REGIDX, host->scsi.irq);
#ifdef USE_DMAC
- p += sprintf(p, "DMAC: uPC71071 Address: %08X IRQ : %d\n\n",
- host->dma.io_port, host->scsi.irq);
+ seq_printf(m, "DMAC: uPC71071 Address: %p IRQ : %d\n\n",
+ host->base + DMAC_OFFSET, host->scsi.irq);
#endif
- p += sprintf(p, "Statistics:\n"
+ seq_printf(m, "Statistics:\n"
"Queued commands: %-10u Issued commands: %-10u\n"
"Done commands : %-10u Reads : %-10u\n"
"Writes : %-10u Others : %-10u\n"
@@ -2907,7 +2828,7 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
for (devidx = 0; devidx < 9; devidx ++) {
unsigned int statptr, prev;
- p += sprintf(p, "\n%c:", devidx == 8 ? 'H' : ('0' + devidx));
+ seq_printf(m, "\n%c:", devidx == 8 ? 'H' : ('0' + devidx));
statptr = host->status_ptr[devidx] - 10;
if ((signed int)statptr < 0)
@@ -2917,7 +2838,7 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
for (; statptr != host->status_ptr[devidx]; statptr = (statptr + 1) & (STATUS_BUFFER_SIZE - 1)) {
if (host->status[devidx][statptr].when) {
- p += sprintf(p, "%c%02X:%02X+%2ld",
+ seq_printf(m, "%c%02X:%02X+%2ld",
host->status[devidx][statptr].irq ? '-' : ' ',
host->status[devidx][statptr].ph,
host->status[devidx][statptr].ssr,
@@ -2928,113 +2849,80 @@ int acornscsi_proc_info(struct Scsi_Host *instance, char *buffer, char **start,
}
}
- p += sprintf(p, "\nAttached devices:\n");
+ seq_printf(m, "\nAttached devices:\n");
shost_for_each_device(scd, instance) {
- p += sprintf(p, "Device/Lun TaggedQ Sync\n");
- p += sprintf(p, " %d/%d ", scd->id, scd->lun);
+ seq_printf(m, "Device/Lun TaggedQ Sync\n");
+ seq_printf(m, " %d/%d ", scd->id, scd->lun);
if (scd->tagged_supported)
- p += sprintf(p, "%3sabled(%3d) ",
+ seq_printf(m, "%3sabled(%3d) ",
scd->simple_tags ? "en" : "dis",
scd->current_tag);
else
- p += sprintf(p, "unsupported ");
+ seq_printf(m, "unsupported ");
if (host->device[scd->id].sync_xfer & 15)
- p += sprintf(p, "offset %d, %d ns\n",
+ seq_printf(m, "offset %d, %d ns\n",
host->device[scd->id].sync_xfer & 15,
acornscsi_getperiod(host->device[scd->id].sync_xfer));
else
- p += sprintf(p, "async\n");
+ seq_printf(m, "async\n");
- pos = p - buffer;
- if (pos + begin < offset) {
- begin += pos;
- p = buffer;
- }
- pos = p - buffer;
- if (pos + begin > offset + length) {
- scsi_device_put(scd);
- break;
- }
}
-
- pos = p - buffer;
-
- *start = buffer + (offset - begin);
- pos -= offset - begin;
-
- if (pos > length)
- pos = length;
-
- return pos;
+ return 0;
}
static struct scsi_host_template acornscsi_template = {
.module = THIS_MODULE,
- .proc_info = acornscsi_proc_info,
+ .show_info = acornscsi_show_info,
.name = "AcornSCSI",
.info = acornscsi_info,
.queuecommand = acornscsi_queuecmd,
-#warning fixme
- .abort = acornscsi_abort,
- .reset = acornscsi_reset,
+ .eh_abort_handler = acornscsi_abort,
+ .eh_bus_reset_handler = acornscsi_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
- .unchecked_isa_dma = 0,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "acornscsi",
};
-static int __devinit
-acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
AS_Host *ashost;
- int ret = -ENOMEM;
+ int ret;
- host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
- if (!host)
+ ret = ecard_request_resources(ec);
+ if (ret)
goto out;
+ host = scsi_host_alloc(&acornscsi_template, sizeof(AS_Host));
+ if (!host) {
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
ashost = (AS_Host *)host->hostdata;
- host->io_port = ecard_address(ec, ECARD_MEMC, 0);
- host->irq = ec->irq;
+ ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
+ ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+ if (!ashost->base || !ashost->fast)
+ goto out_put;
- ashost->host = host;
- ashost->scsi.io_port = ioaddr(host->io_port + 0x800);
- ashost->scsi.irq = host->irq;
- ashost->card.io_intr = POD_SPACE(host->io_port) + 0x800;
- ashost->card.io_page = POD_SPACE(host->io_port) + 0xc00;
- ashost->card.io_ram = ioaddr(host->io_port);
- ashost->dma.io_port = host->io_port + 0xc00;
- ashost->dma.io_intr_clear = POD_SPACE(host->io_port) + 0x800;
+ host->irq = ec->irq;
+ ashost->host = host;
+ ashost->scsi.irq = host->irq;
- ec->irqaddr = (char *)ioaddr(ashost->card.io_intr);
+ ec->irqaddr = ashost->fast + INT_REG;
ec->irqmask = 0x0a;
- ret = -EBUSY;
- if (!request_region(host->io_port + 0x800, 2, "acornscsi(sbic)"))
- goto err_1;
- if (!request_region(ashost->card.io_intr, 1, "acornscsi(intr)"))
- goto err_2;
- if (!request_region(ashost->card.io_page, 1, "acornscsi(page)"))
- goto err_3;
-#ifdef USE_DMAC
- if (!request_region(ashost->dma.io_port, 256, "acornscsi(dmac)"))
- goto err_4;
-#endif
- if (!request_region(host->io_port, 2048, "acornscsi(ram)"))
- goto err_5;
-
- ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost);
+ ret = request_irq(host->irq, acornscsi_intr, 0, "acornscsi", ashost);
if (ret) {
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
host->host_no, ashost->scsi.irq, ret);
- goto err_6;
+ goto out_put;
}
memset(&ashost->stats, 0, sizeof (ashost->stats));
@@ -3046,32 +2934,27 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ret = scsi_add_host(host, &ec->dev);
if (ret)
- goto err_7;
+ goto out_irq;
scsi_scan_host(host);
goto out;
- err_7:
+ out_irq:
free_irq(host->irq, ashost);
- err_6:
- release_region(host->io_port, 2048);
- err_5:
-#ifdef USE_DMAC
- release_region(ashost->dma.io_port, 256);
-#endif
- err_4:
- release_region(ashost->card.io_page, 1);
- err_3:
- release_region(ashost->card.io_intr, 1);
- err_2:
- release_region(host->io_port + 0x800, 2);
- err_1:
+ msgqueue_free(&ashost->scsi.msgs);
+ queue_free(&ashost->queues.disconnected);
+ queue_free(&ashost->queues.issue);
+ out_put:
+ ecardm_iounmap(ec, ashost->fast);
+ ecardm_iounmap(ec, ashost->base);
scsi_host_put(host);
+ out_release:
+ ecard_release_resources(ec);
out:
return ret;
}
-static void __devexit acornscsi_remove(struct expansion_card *ec)
+static void acornscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
AS_Host *ashost = (AS_Host *)host->hostdata;
@@ -3082,20 +2965,17 @@ static void __devexit acornscsi_remove(struct expansion_card *ec)
/*
* Put card into RESET state
*/
- outb(0x80, ashost->card.io_page);
+ writeb(0x80, ashost->fast + PAGE_REG);
free_irq(host->irq, ashost);
- release_region(host->io_port + 0x800, 2);
- release_region(ashost->card.io_intr, 1);
- release_region(ashost->card.io_page, 1);
- release_region(ashost->dma.io_port, 256);
- release_region(host->io_port, 2048);
-
msgqueue_free(&ashost->scsi.msgs);
queue_free(&ashost->queues.disconnected);
queue_free(&ashost->queues.issue);
+ ecardm_iounmap(ec, ashost->fast);
+ ecardm_iounmap(ec, ashost->base);
scsi_host_put(host);
+ ecard_release_resources(ec);
}
static const struct ecard_id acornscsi_cids[] = {
@@ -3105,7 +2985,7 @@ static const struct ecard_id acornscsi_cids[] = {
static struct ecard_driver acornscsi_driver = {
.probe = acornscsi_probe,
- .remove = __devexit_p(acornscsi_remove),
+ .remove = acornscsi_remove,
.id_table = acornscsi_cids,
.drv = {
.name = "acornscsi",
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index d11424b89f4..01bc715a3ae 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -179,7 +179,6 @@
/* miscellaneous internal variables */
-#define POD_SPACE(x) ((x) + 0xd0000)
#define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
#define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1)
@@ -224,8 +223,8 @@ typedef enum {
* Synchronous transfer state
*/
typedef enum { /* Synchronous transfer state */
- SYNC_ASYNCHRONOUS, /* don't negociate synchronous transfers*/
- SYNC_NEGOCIATE, /* start negociation */
+ SYNC_ASYNCHRONOUS, /* don't negotiate synchronous transfers*/
+ SYNC_NEGOCIATE, /* start negotiation */
SYNC_SENT_REQUEST, /* sent SDTR message */
SYNC_COMPLETED, /* received SDTR reply */
} syncxfer_t;
@@ -279,10 +278,11 @@ typedef struct acornscsi_hostdata {
struct Scsi_Host *host; /* host */
struct scsi_cmnd *SCpnt; /* currently processing command */
struct scsi_cmnd *origSCpnt; /* original connecting command */
+ void __iomem *base; /* memc base address */
+ void __iomem *fast; /* fast ioc base address */
/* driver information */
struct {
- unsigned int io_port; /* base address of WD33C93 */
unsigned int irq; /* interrupt */
phase_t phase; /* current phase */
@@ -322,15 +322,13 @@ typedef struct acornscsi_hostdata {
/* per-device info */
struct {
unsigned char sync_xfer; /* synchronous transfer (SBIC value) */
- syncxfer_t sync_state; /* sync xfer negociation state */
+ syncxfer_t sync_state; /* sync xfer negotiation state */
unsigned char disconnect_ok:1; /* device can disconnect */
} device[8];
unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */
/* DMA info */
struct {
- unsigned int io_port; /* base address of DMA controller */
- unsigned int io_intr_clear; /* address of DMA interrupt clear */
unsigned int free_addr; /* next free address */
unsigned int start_addr; /* start address of current transfer */
dmadir_t direction; /* dma direction */
@@ -345,9 +343,6 @@ typedef struct acornscsi_hostdata {
/* card info */
struct {
- unsigned int io_intr; /* base address of interrupt id reg */
- unsigned int io_page; /* base address of page reg */
- unsigned int io_ram; /* base address of RAM access */
unsigned char page_reg; /* current setting of page reg */
} card;
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 2836fe248df..32d23212de4 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -220,47 +220,21 @@ static const char *arxescsi_info(struct Scsi_Host *host)
return string;
}
-/*
- * Function: int arxescsi_proc_info(char *buffer, char **start, off_t offset,
- * int length, int host_no, int inout)
- * Purpose : Return information about the driver to a user process accessing
- * the /proc filesystem.
- * Params : buffer - a buffer to write information to
- * start - a pointer into this buffer set by this routine to the start
- * of the required information.
- * offset - offset into information that we have read upto.
- * length - length of buffer
- * host_no - host number to return information for
- * inout - 0 for reading, 1 for writing.
- * Returns : length of data written to buffer.
- */
static int
-arxescsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length,
- int inout)
+arxescsi_show_info(struct seq_file *m, struct Scsi_Host *host)
{
struct arxescsi_info *info;
- char *p = buffer;
- int pos;
-
info = (struct arxescsi_info *)host->hostdata;
- if (inout == 1)
- return -EINVAL;
-
- p += sprintf(p, "ARXE 16-bit SCSI driver v%s\n", VERSION);
- p += fas216_print_host(&info->info, p);
- p += fas216_print_stats(&info->info, p);
- p += fas216_print_devices(&info->info, p);
-
- *start = buffer + offset;
- pos = p - buffer - offset;
- if (pos > length)
- pos = length;
- return pos;
+ seq_printf(m, "ARXE 16-bit SCSI driver v%s\n", VERSION);
+ fas216_print_host(&info->info, m);
+ fas216_print_stats(&info->info, m);
+ fas216_print_devices(&info->info, m);
+ return 0;
}
static struct scsi_host_template arxescsi_template = {
- .proc_info = arxescsi_proc_info,
+ .show_info = arxescsi_show_info,
.name = "ARXE SCSI card",
.info = arxescsi_info,
.queuecommand = fas216_noqueue_command,
@@ -276,8 +250,7 @@ static struct scsi_host_template arxescsi_template = {
.proc_name = "arxescsi",
};
-static int __devinit
-arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct arxescsi_info *info;
@@ -305,7 +278,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
info->base = base;
info->info.scsi.io_base = base + 0x2000;
- info->info.scsi.irq = NO_IRQ;
+ info->info.scsi.irq = 0;
info->info.scsi.dma = NO_DMA;
info->info.scsi.io_shift = 5;
info->info.ifcfg.clockrate = 24; /* MHz */
@@ -340,7 +313,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit arxescsi_remove(struct expansion_card *ec)
+static void arxescsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
@@ -359,7 +332,7 @@ static const struct ecard_id arxescsi_cids[] = {
static struct ecard_driver arxescsi_driver = {
.probe = arxescsi_probe,
- .remove = __devexit_p(arxescsi_remove),
+ .remove = arxescsi_remove,
.id_table = arxescsi_cids,
.drv = {
.name = "arxescsi",
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index 49d838e90a2..8ef810a4476 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -12,7 +12,6 @@
#include <asm/ecard.h>
#include <asm/io.h>
-#include <asm/system.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
@@ -31,16 +30,12 @@
#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
-#define NCR5380_proc_info cumanascsi_proc_info
#define NCR5380_implementation_fields \
unsigned ctrl; \
void __iomem *base; \
void __iomem *dma
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
void cumanascsi_setup(char *str, int *ints)
@@ -222,13 +217,12 @@ static struct scsi_host_template cumanascsi_template = {
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
- .unchecked_isa_dma = 0,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "CumanaSCSI-1",
};
-static int __devinit
-cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int cumanascsi1_probe(struct expansion_card *ec,
+ const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret;
@@ -265,7 +259,7 @@ cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
goto out_unmap;
}
- ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED,
+ ret = request_irq(host->irq, cumanascsi_intr, 0,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
@@ -300,7 +294,7 @@ cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit cumanascsi1_remove(struct expansion_card *ec)
+static void cumanascsi1_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
@@ -322,7 +316,7 @@ static const struct ecard_id cumanascsi1_cids[] = {
static struct ecard_driver cumanascsi1_driver = {
.probe = cumanascsi1_probe,
- .remove = __devexit_p(cumanascsi1_remove),
+ .remove = cumanascsi1_remove,
.id_table = cumanascsi1_cids,
.drv = {
.name = "cumanascsi1",
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 68a64123af8..abc66f5263e 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -318,7 +318,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
{
int ret = length;
- if (length >= 11 && strcmp(buffer, "CUMANASCSI2") == 0) {
+ if (length >= 11 && strncmp(buffer, "CUMANASCSI2", 11) == 0) {
buffer += 11;
length -= 11;
@@ -337,50 +337,25 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
return ret;
}
-/* Prototype: int cumanascsi_2_proc_info(char *buffer, char **start, off_t offset,
- * int length, int host_no, int inout)
- * Purpose : Return information about the driver to a user process accessing
- * the /proc filesystem.
- * Params : buffer - a buffer to write information to
- * start - a pointer into this buffer set by this routine to the start
- * of the required information.
- * offset - offset into information that we have read upto.
- * length - length of buffer
- * host_no - host number to return information for
- * inout - 0 for reading, 1 for writing.
- * Returns : length of data written to buffer.
- */
-int cumanascsi_2_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t offset,
- int length, int inout)
+static int cumanascsi_2_show_info(struct seq_file *m, struct Scsi_Host *host)
{
struct cumanascsi2_info *info;
- char *p = buffer;
- int pos;
-
- if (inout == 1)
- return cumanascsi_2_set_proc_info(host, buffer, length);
-
info = (struct cumanascsi2_info *)host->hostdata;
- p += sprintf(p, "Cumana SCSI II driver v%s\n", VERSION);
- p += fas216_print_host(&info->info, p);
- p += sprintf(p, "Term : o%s\n",
+ seq_printf(m, "Cumana SCSI II driver v%s\n", VERSION);
+ fas216_print_host(&info->info, m);
+ seq_printf(m, "Term : o%s\n",
info->terms ? "n" : "ff");
- p += fas216_print_stats(&info->info, p);
- p += fas216_print_devices(&info->info, p);
-
- *start = buffer + offset;
- pos = p - buffer - offset;
- if (pos > length)
- pos = length;
-
- return pos;
+ fas216_print_stats(&info->info, m);
+ fas216_print_devices(&info->info, m);
+ return 0;
}
static struct scsi_host_template cumanascsi2_template = {
.module = THIS_MODULE,
- .proc_info = cumanascsi_2_proc_info,
+ .show_info = cumanascsi_2_show_info,
+ .write_info = cumanascsi_2_set_proc_info,
.name = "Cumana SCSI II",
.info = cumanascsi_2_info,
.queuecommand = fas216_queue_command,
@@ -390,14 +365,15 @@ static struct scsi_host_template cumanascsi2_template = {
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "cumanascsi2",
};
-static int __devinit
-cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int cumanascsi2_probe(struct expansion_card *ec,
+ const struct ecard_id *id)
{
struct Scsi_Host *host;
struct cumanascsi2_info *info;
@@ -455,7 +431,7 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
goto out_free;
ret = request_irq(ec->irq, cumanascsi_2_intr,
- IRQF_DISABLED, "cumanascsi2", info);
+ 0, "cumanascsi2", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
@@ -494,7 +470,7 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit cumanascsi2_remove(struct expansion_card *ec)
+static void cumanascsi2_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct cumanascsi2_info *info = (struct cumanascsi2_info *)host->hostdata;
@@ -518,7 +494,7 @@ static const struct ecard_id cumanascsi2_cids[] = {
static struct ecard_driver cumanascsi2_driver = {
.probe = cumanascsi2_probe,
- .remove = __devexit_p(cumanascsi2_remove),
+ .remove = cumanascsi2_remove,
.id_table = cumanascsi2_cids,
.drv = {
.name = "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index bb2477b3fb0..5bf3c0d134b 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -273,7 +273,7 @@ static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base)
{
const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
- const void __iomem *reg_dmadata = base + EESOX_DMADATA;
+ void __iomem *reg_dmadata = base + EESOX_DMADATA;
do {
unsigned int status;
@@ -422,45 +422,20 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
return ret;
}
-/* Prototype: int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
- * int length, int host_no, int inout)
- * Purpose : Return information about the driver to a user process accessing
- * the /proc filesystem.
- * Params : buffer - a buffer to write information to
- * start - a pointer into this buffer set by this routine to the start
- * of the required information.
- * offset - offset into information that we have read upto.
- * length - length of buffer
- * host_no - host number to return information for
- * inout - 0 for reading, 1 for writing.
- * Returns : length of data written to buffer.
- */
-int eesoxscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
- int length, int inout)
+static int eesoxscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
{
struct eesoxscsi_info *info;
- char *p = buffer;
- int pos;
-
- if (inout == 1)
- return eesoxscsi_set_proc_info(host, buffer, length);
info = (struct eesoxscsi_info *)host->hostdata;
- p += sprintf(p, "EESOX SCSI driver v%s\n", VERSION);
- p += fas216_print_host(&info->info, p);
- p += sprintf(p, "Term : o%s\n",
+ seq_printf(m, "EESOX SCSI driver v%s\n", VERSION);
+ fas216_print_host(&info->info, m);
+ seq_printf(m, "Term : o%s\n",
info->control & EESOX_TERM_ENABLE ? "n" : "ff");
- p += fas216_print_stats(&info->info, p);
- p += fas216_print_devices(&info->info, p);
-
- *start = buffer + offset;
- pos = p - buffer - offset;
- if (pos > length)
- pos = length;
-
- return pos;
+ fas216_print_stats(&info->info, m);
+ fas216_print_devices(&info->info, m);
+ return 0;
}
static ssize_t eesoxscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
@@ -498,7 +473,8 @@ static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
static struct scsi_host_template eesox_template = {
.module = THIS_MODULE,
- .proc_info = eesoxscsi_proc_info,
+ .show_info = eesoxscsi_show_info,
+ .write_info = eesoxscsi_set_proc_info,
.name = "EESOX SCSI",
.info = eesoxscsi_info,
.queuecommand = fas216_queue_command,
@@ -508,14 +484,14 @@ static struct scsi_host_template eesox_template = {
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "eesox",
};
-static int __devinit
-eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
struct eesoxscsi_info *info;
@@ -616,7 +592,7 @@ eesoxscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit eesoxscsi_remove(struct expansion_card *ec)
+static void eesoxscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct eesoxscsi_info *info = (struct eesoxscsi_info *)host->hostdata;
@@ -642,7 +618,7 @@ static const struct ecard_id eesoxscsi_cids[] = {
static struct ecard_driver eesoxscsi_driver = {
.probe = eesoxscsi_probe,
- .remove = __devexit_p(eesoxscsi_remove),
+ .remove = eesoxscsi_remove,
.id_table = eesoxscsi_cids,
.drv = {
.name = "eesoxscsi",
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index a715632e19d..b46a6f6c0eb 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -179,6 +179,7 @@ static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char *
SCp->buffers_residual, suffix);
}
+#ifdef CHECK_STRUCTURE
static void fas216_dumpinfo(FAS216_Info *info)
{
static int used = 0;
@@ -223,7 +224,6 @@ static void fas216_dumpinfo(FAS216_Info *info)
info->internal_done, info->magic_end);
}
-#ifdef CHECK_STRUCTURE
static void __fas216_checkmagic(FAS216_Info *info, const char *func)
{
int corruption = 0;
@@ -240,7 +240,7 @@ static void __fas216_checkmagic(FAS216_Info *info, const char *func)
panic("scsi memory space corrupted in %s", func);
}
}
-#define fas216_checkmagic(info) __fas216_checkmagic((info), __FUNCTION__)
+#define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
#else
#define fas216_checkmagic(info)
#endif
@@ -2119,7 +2119,7 @@ request_sense:
* executed, unless a target connects to us.
*/
if (info->reqSCpnt)
- printk(KERN_WARNING "scsi%d.%c: loosing request command\n",
+ printk(KERN_WARNING "scsi%d.%c: losing request command\n",
info->host->host_no, '0' + SCpnt->device->id);
info->reqSCpnt = SCpnt;
}
@@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
fn(info, SCpnt, result);
- if (info->scsi.irq != NO_IRQ) {
+ if (info->scsi.irq) {
spin_lock_irqsave(&info->host_lock, flags);
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
@@ -2198,7 +2198,7 @@ no_command:
* Returns: 0 on success, else error.
* Notes: io_request_lock is held, interrupts are disabled.
*/
-int fas216_queue_command(struct scsi_cmnd *SCpnt,
+static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2240,6 +2240,8 @@ int fas216_queue_command(struct scsi_cmnd *SCpnt,
return result;
}
+DEF_SCSI_QCMD(fas216_queue_command)
+
/**
* fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
* @SCpnt: Command to wake
@@ -2263,7 +2265,7 @@ static void fas216_internal_done(struct scsi_cmnd *SCpnt)
* Returns: scsi result code.
* Notes: io_request_lock is held, interrupts are disabled.
*/
-int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
+static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2274,10 +2276,10 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
* We should only be using this if we don't have an interrupt.
* Provide some "incentive" to use the queueing code.
*/
- BUG_ON(info->scsi.irq != NO_IRQ);
+ BUG_ON(info->scsi.irq);
info->internal_done = 0;
- fas216_queue_command(SCpnt, fas216_internal_done);
+ fas216_queue_command_lck(SCpnt, fas216_internal_done);
/*
* This wastes time, since we can't return until the command is
@@ -2292,7 +2294,7 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
* If we don't have an IRQ, then we must poll the card for
* it's interrupt, and use that to call this driver's
* interrupt routine. That way, we keep the command
- * progressing. Maybe we can add some inteligence here
+ * progressing. Maybe we can add some intelligence here
* and go to sleep if we know that the device is going
* to be some time (eg, disconnected).
*/
@@ -2310,6 +2312,8 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
return 0;
}
+DEF_SCSI_QCMD(fas216_noqueue_command)
+
/*
* Error handler timeout function. Indicate that we timed out,
* and wake up any error handler process so it can continue.
@@ -2516,7 +2520,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
- mod_timer(&info->eh_timer, 30 * HZ);
+ mod_timer(&info->eh_timer, jiffies + 30 * HZ);
spin_unlock_irqrestore(&info->host_lock, flags);
/*
@@ -2658,7 +2662,7 @@ int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
fas216_checkmagic(info);
printk("scsi%d.%c: %s: resetting host\n",
- info->host->host_no, '0' + SCpnt->device->id, __FUNCTION__);
+ info->host->host_no, '0' + SCpnt->device->id, __func__);
/*
* Reset the SCSI chip.
@@ -2954,9 +2958,9 @@ void fas216_release(struct Scsi_Host *host)
queue_free(&info->queues.issue);
}
-int fas216_print_host(FAS216_Info *info, char *buffer)
+void fas216_print_host(FAS216_Info *info, struct seq_file *m)
{
- return sprintf(buffer,
+ seq_printf(m,
"\n"
"Chip : %s\n"
" Address: 0x%p\n"
@@ -2966,11 +2970,9 @@ int fas216_print_host(FAS216_Info *info, char *buffer)
info->scsi.irq, info->scsi.dma);
}
-int fas216_print_stats(FAS216_Info *info, char *buffer)
+void fas216_print_stats(FAS216_Info *info, struct seq_file *m)
{
- char *p = buffer;
-
- p += sprintf(p, "\n"
+ seq_printf(m, "\n"
"Command Statistics:\n"
" Queued : %u\n"
" Issued : %u\n"
@@ -2987,38 +2989,33 @@ int fas216_print_stats(FAS216_Info *info, char *buffer)
info->stats.writes, info->stats.miscs,
info->stats.disconnects, info->stats.aborts,
info->stats.bus_resets, info->stats.host_resets);
-
- return p - buffer;
}
-int fas216_print_devices(FAS216_Info *info, char *buffer)
+void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
{
struct fas216_device *dev;
struct scsi_device *scd;
- char *p = buffer;
- p += sprintf(p, "Device/Lun TaggedQ Parity Sync\n");
+ seq_printf(m, "Device/Lun TaggedQ Parity Sync\n");
shost_for_each_device(scd, info->host) {
dev = &info->device[scd->id];
- p += sprintf(p, " %d/%d ", scd->id, scd->lun);
+ seq_printf(m, " %d/%d ", scd->id, scd->lun);
if (scd->tagged_supported)
- p += sprintf(p, "%3sabled(%3d) ",
+ seq_printf(m, "%3sabled(%3d) ",
scd->simple_tags ? "en" : "dis",
scd->current_tag);
else
- p += sprintf(p, "unsupported ");
+ seq_printf(m, "unsupported ");
- p += sprintf(p, "%3sabled ", dev->parity_enabled ? "en" : "dis");
+ seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
if (dev->sof)
- p += sprintf(p, "offset %d, %d ns\n",
+ seq_printf(m, "offset %d, %d ns\n",
dev->sof, dev->period * 4);
else
- p += sprintf(p, "async\n");
+ seq_printf(m, "async\n");
}
-
- return p - buffer;
}
EXPORT_SYMBOL(fas216_init);
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index b65f4cf0eec..c57c16ef819 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -12,10 +12,6 @@
#ifndef FAS216_H
#define FAS216_H
-#ifndef NO_IRQ
-#define NO_IRQ 255
-#endif
-
#include <scsi/scsi_eh.h>
#include "queue.h"
@@ -203,11 +199,11 @@ typedef enum {
} fasdmatype_t;
typedef enum {
- neg_wait, /* Negociate with device */
- neg_inprogress, /* Negociation sent */
- neg_complete, /* Negociation complete */
- neg_targcomplete, /* Target completed negociation */
- neg_invalid /* Negociation not supported */
+ neg_wait, /* Negotiate with device */
+ neg_inprogress, /* Negotiation sent */
+ neg_complete, /* Negotiation complete */
+ neg_targcomplete, /* Target completed negotiation */
+ neg_invalid /* Negotiation not supported */
} neg_t;
#define MAGIC 0x441296bdUL
@@ -331,23 +327,21 @@ extern int fas216_init (struct Scsi_Host *instance);
*/
extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
-/* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process.
- * Params : SCpnt - Command to queue
- * done - done function to call once command is complete
+ * Params : h - host adapter
+ * : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
-extern int fas216_queue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
-/* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
* Purpose : queue a command for adapter to process, and process it to completion.
- * Params : SCpnt - Command to queue
- * done - done function to call once command is complete
+ * Params : h - host adapter
+ * : SCpnt - Command to queue
* Returns : 0 - success, else error
*/
-extern int fas216_noqueue_command(struct scsi_cmnd *,
- void (*done)(struct scsi_cmnd *));
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
/* Function: irqreturn_t fas216_intr (FAS216_Info *info)
* Purpose : handle interrupts from the interface to progress a command
@@ -364,9 +358,9 @@ extern void fas216_remove (struct Scsi_Host *instance);
*/
extern void fas216_release (struct Scsi_Host *instance);
-extern int fas216_print_host(FAS216_Info *info, char *buffer);
-extern int fas216_print_stats(FAS216_Info *info, char *buffer);
-extern int fas216_print_devices(FAS216_Info *info, char *buffer);
+extern void fas216_print_host(FAS216_Info *info, struct seq_file *m);
+extern void fas216_print_stats(FAS216_Info *info, struct seq_file *m);
+extern void fas216_print_devices(FAS216_Info *info, struct seq_file *m);
/* Function: int fas216_eh_abort(struct scsi_cmnd *SCpnt)
* Purpose : abort this command
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 849cdf89f7b..188e734c7ff 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -13,7 +13,6 @@
#include <asm/ecard.h>
#include <asm/io.h>
-#include <asm/system.h>
#include "../scsi.h"
#include <scsi/scsi_host.h>
@@ -22,6 +21,7 @@
/*#define PSEUDO_DMA*/
#define OAKSCSI_PUBLIC_RELEASE 1
+#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_local_declare() void __iomem *_base
@@ -31,14 +31,12 @@
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
#define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command
-#define NCR5380_proc_info oakscsi_proc_info
+#define NCR5380_show_info oakscsi_show_info
+#define NCR5380_write_info oakscsi_write_info
#define NCR5380_implementation_fields \
void __iomem *base
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
@@ -115,7 +113,8 @@ printk("reading %p len %d\n", addr, len);
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
- .proc_info = oakscsi_proc_info,
+ .show_info = oakscsi_show_info,
+ .write_info = oakscsi_write_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
@@ -129,8 +128,7 @@ static struct scsi_host_template oakscsi_template = {
.proc_name = "oakscsi",
};
-static int __devinit
-oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct Scsi_Host *host;
int ret = -ENOMEM;
@@ -182,7 +180,7 @@ oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit oakscsi_remove(struct expansion_card *ec)
+static void oakscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
@@ -202,7 +200,7 @@ static const struct ecard_id oakscsi_cids[] = {
static struct ecard_driver oakscsi_driver = {
.probe = oakscsi_probe,
- .remove = __devexit_p(oakscsi_remove),
+ .remove = oakscsi_remove,
.id_table = oakscsi_cids,
.drv = {
.name = "oakscsi",
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index d9a546d1917..5e1b73e1b74 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -232,37 +232,25 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
* Params : buffer - a buffer to write information to
* start - a pointer into this buffer set by this routine to the start
* of the required information.
- * offset - offset into information that we have read upto.
+ * offset - offset into information that we have read up to.
* length - length of buffer
* inout - 0 for reading, 1 for writing.
* Returns : length of data written to buffer.
*/
-int powertecscsi_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
- int length, int inout)
+static int powertecscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
{
struct powertec_info *info;
- char *p = buffer;
- int pos;
-
- if (inout == 1)
- return powertecscsi_set_proc_info(host, buffer, length);
info = (struct powertec_info *)host->hostdata;
- p += sprintf(p, "PowerTec SCSI driver v%s\n", VERSION);
- p += fas216_print_host(&info->info, p);
- p += sprintf(p, "Term : o%s\n",
+ seq_printf(m, "PowerTec SCSI driver v%s\n", VERSION);
+ fas216_print_host(&info->info, m);
+ seq_printf(m, "Term : o%s\n",
info->term_ctl ? "n" : "ff");
- p += fas216_print_stats(&info->info, p);
- p += fas216_print_devices(&info->info, p);
-
- *start = buffer + offset;
- pos = p - buffer - offset;
- if (pos > length)
- pos = length;
-
- return pos;
+ fas216_print_stats(&info->info, m);
+ fas216_print_devices(&info->info, m);
+ return 0;
}
static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
@@ -291,7 +279,8 @@ static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
static struct scsi_host_template powertecscsi_template = {
.module = THIS_MODULE,
- .proc_info = powertecscsi_proc_info,
+ .show_info = powertecscsi_show_info,
+ .write_info = powertecscsi_set_proc_info,
.name = "PowerTec SCSI",
.info = powertecscsi_info,
.queuecommand = fas216_queue_command,
@@ -302,14 +291,15 @@ static struct scsi_host_template powertecscsi_template = {
.can_queue = 8,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = "powertec",
};
-static int __devinit
-powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
+static int powertecscsi_probe(struct expansion_card *ec,
+ const struct ecard_id *id)
{
struct Scsi_Host *host;
struct powertec_info *info;
@@ -368,7 +358,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
goto out_free;
ret = request_irq(ec->irq, powertecscsi_intr,
- IRQF_DISABLED, "powertec", info);
+ 0, "powertec", info);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, ec->irq, ret);
@@ -408,7 +398,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
return ret;
}
-static void __devexit powertecscsi_remove(struct expansion_card *ec)
+static void powertecscsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
struct powertec_info *info = (struct powertec_info *)host->hostdata;
@@ -434,7 +424,7 @@ static const struct ecard_id powertecscsi_cids[] = {
static struct ecard_driver powertecscsi_driver = {
.probe = powertecscsi_probe,
- .remove = __devexit_p(powertecscsi_remove),
+ .remove = powertecscsi_remove,
.id_table = powertecscsi_cids,
.drv = {
.name = "powertecscsi",
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-11 05:35:33 +0000