diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 745 |
1 files changed, 399 insertions, 346 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c4dfcc91ddd..baca5897039 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1,13 +1,22 @@ menu "SCSI device support" +config SCSI_MOD + tristate + default y if SCSI=n || SCSI=y + default m if SCSI=m + config RAID_ATTRS tristate "RAID Transport Class" default n + depends on BLOCK + depends on SCSI_MOD ---help--- Provides RAID config SCSI tristate "SCSI device support" + depends on BLOCK + select SCSI_DMA if HAS_DMA ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -18,7 +27,7 @@ config SCSI You also need to say Y here if you have a device which speaks the SCSI protocol. Examples of this include the parallel port version of the IOMEGA ZIP drive, USB storage devices, Fibre - Channel, FireWire storage and the IDE-SCSI emulation driver. + Channel, and FireWire storage. To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. @@ -27,6 +36,17 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_DMA + bool + default n + +config SCSI_TGT + tristate "SCSI target support" + depends on SCSI + ---help--- + If you want to use SCSI target mode drivers enable this option. + If you choose M, the module will be called scsi_tgt. + config SCSI_NETLINK bool default n @@ -38,10 +58,10 @@ config SCSI_PROC_FS default y ---help--- This option enables support for the various files in - /proc/scsi. In Linux 2.6 this has been superceeded by + /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. - If unusure say Y. + If unsure say Y. comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI @@ -49,8 +69,10 @@ comment "SCSI support type (disk, tape, CD-ROM)" config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI + select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, + Serial ATA (SATA) or Parallel ATA (PATA) hard disks, USB storage or the SCSI or parallel port version of the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from @@ -83,18 +105,18 @@ config CHR_DEV_OSST tristate "SCSI OnStream SC-x0 tape support" depends on SCSI ---help--- - The OnStream SC-x0 SCSI tape drives can not be driven by the + The OnStream SC-x0 SCSI tape drives cannot be driven by the standard st driver, but instead need this special osst driver and - use the /dev/osstX char device nodes (major 206). Via usb-storage - and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives - as well. Note that there is also a second generation of OnStream + use the /dev/osstX char device nodes (major 206). Via usb-storage, + you may be able to drive the USB-x0 and DI-x0 drives as well. + Note that there is also a second generation of OnStream tape drives (ADR-x0) that supports the standard SCSI-2 commands for tapes (QIC-157) and can be driven by the standard driver st. For more information, you may have a look at the SCSI-HOWTO <http://www.tldp.org/docs.html#howto> and <file:Documentation/scsi/osst.txt> in the kernel source. More info on the OnStream driver may be found on - <http://linux1.onstream.nl/test/> + <http://sourceforge.net/projects/osst/> Please also have a look at the standard st docu, as most of it applies to osst as well. @@ -105,10 +127,11 @@ config BLK_DEV_SR tristate "SCSI CDROM support" depends on SCSI ---help--- - If you want to use a SCSI or FireWire CD-ROM under Linux, - say Y and read the SCSI-HOWTO and the CDROM-HOWTO at - <http://www.tldp.org/docs.html#howto>. Also make sure to say - Y or M to "ISO 9660 CD-ROM file system support" later. + If you want to use a CD or DVD drive attached to your computer + by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO + and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. + + Make sure to say Y or M to "ISO 9660 CD-ROM file system support". To compile this driver as a module, choose M here and read <file:Documentation/scsi/scsi.txt>. @@ -133,9 +156,9 @@ config CHR_DEV_SG directly, so you need some additional software which knows how to talk to these devices using the SCSI protocol: - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD + For scanners, look at SANE (<http://www.sane-project.org/>). For CD writer software look at Cdrtools - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) + (<http://cdrecord.berlios.de/private/cdrecord.html>) and for burning a "disk at once": CDRDAO (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). @@ -157,29 +180,36 @@ config CHR_DEV_SCH don't need this for those tiny 6-slot cdrom changers. Media changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. If you have such hardware and want to use it with linux, say Y - here. Check <file:Documentation/scsi-changer.txt> for details. + here. Check <file:Documentation/scsi/scsi-changer.txt> for details. If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/modules.txt> and - <file:Documentation/scsi.txt>. The module will be called ch.o. + say M here and read <file:Documentation/kbuild/modules.txt> and + <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. If unsure, say N. - -comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" - depends on SCSI +config SCSI_ENCLOSURE + tristate "SCSI Enclosure Support" + depends on SCSI && ENCLOSURE_SERVICES + help + Enclosures are devices sitting on or in SCSI backplanes that + manage devices. If you have a disk cage, the chances are that + it has an enclosure device. Selecting this option will just allow + certain enclosure conditions to be reported and is not required. config SCSI_MULTI_LUN bool "Probe all LUNs on each SCSI device" depends on SCSI help - If you have a SCSI device that supports more than one LUN (Logical - Unit Number), e.g. a CD jukebox, and only one LUN is detected, you - can say Y here to force the SCSI driver to probe for multiple LUNs. - A SCSI device with multiple LUNs acts logically like multiple SCSI - devices. The vast majority of SCSI devices have only one LUN, and - so most people can say N here. The max_luns boot/module parameter - allows to override this setting. + Some devices support more than one LUN (Logical Unit Number) in order + to allow access to several media, e.g. CD jukebox, USB card reader, + mobile phone in mass storage mode. This option forces the kernel to + probe for all LUNs by default. This setting can be overridden by + max_luns boot/module parameter. Note that this option does not affect + devices conforming to SCSI-3 or higher as they can explicitly report + their number of LUNs. It is safe to say Y here unless you have one of + those rare devices which reacts in an unexpected way when probed for + multiple LUNs. config SCSI_CONSTANTS bool "Verbose SCSI error reporting (kernel size +=12K)" @@ -200,20 +230,42 @@ config SCSI_LOGGING can enable logging by saying Y to "/proc file system support" and "Sysctl support" below and executing the command - echo "scsi log token [level]" > /proc/scsi/scsi + echo <bitmask> > /proc/sys/dev/scsi/logging_level - at boot time after the /proc file system has been mounted. + where <bitmask> is a four byte value representing the logging type + and logging level for each type of logging selected. - There are a number of things that can be used for 'token' (you can - find them in the source: <file:drivers/scsi/scsi.c>), and this - allows you to select the types of information you want, and the - level allows you to select the level of verbosity. + There are a number of logging types and you can find them in the + source at <file:drivers/scsi/scsi_logging.h>. The logging levels + are also described in that file and they determine the verbosity of + the logging for each logging type. If you say N here, it may be harder to track down some types of SCSI problems. If you say Y here your kernel will be somewhat larger, but there should be no noticeable performance impact as long as you have logging turned off. +config SCSI_SCAN_ASYNC + bool "Asynchronous SCSI scanning" + depends on SCSI + help + The SCSI subsystem can probe for devices while the rest of the + system continues booting, and even probe devices on different + busses in parallel, leading to a significant speed-up. + + If you have built SCSI as modules, enabling this option can + be a problem as the devices may not have been found by the + time your system expects them to have been. You can load the + scsi_wait_scan module to ensure that all scans have completed. + If you build your SCSI drivers into the kernel, then everything + will work fine if you say Y here. + + You can override this choice by specifying "scsi_mod.scan=sync" + or async on the kernel's command line. + + Note that this setting also affects whether resuming from + system suspend will be performed asynchronously. + menu "SCSI Transports" depends on SCSI @@ -233,9 +285,17 @@ config SCSI_FC_ATTRS each attached FiberChannel device to sysfs, say Y. Otherwise, say N. +config SCSI_FC_TGT_ATTRS + bool "SCSI target support for FiberChannel Transport Attributes" + depends on SCSI_FC_ATTRS + depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS + help + If you want to use SCSI target mode drivers enable this option. + config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" depends on SCSI && NET + select BLK_DEV_BSGLIB help If you wish to export transport-specific information about each attached iSCSI device to sysfs, say Y. @@ -244,16 +304,35 @@ config SCSI_ISCSI_ATTRS config SCSI_SAS_ATTRS tristate "SAS Transport Attributes" depends on SCSI + select BLK_DEV_BSG help If you wish to export transport-specific information about each attached SAS device to sysfs, say Y. source "drivers/scsi/libsas/Kconfig" +config SCSI_SRP_ATTRS + tristate "SRP Transport Attributes" + depends on SCSI + help + If you wish to export transport-specific information about + each attached SRP device to sysfs, say Y. + +config SCSI_SRP_TGT_ATTRS + bool "SCSI target support for SRP Transport Attributes" + depends on SCSI_SRP_ATTRS + depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS + help + If you want to use SCSI target mode drivers enable this option. + endmenu -menu "SCSI low-level drivers" +menuconfig SCSI_LOWLEVEL + bool "SCSI low-level drivers" depends on SCSI!=n + default y + +if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" @@ -277,26 +356,28 @@ config ISCSI_TCP The userspace component needed to initialize the driver, documentation, and sample configuration files can be found here: - http://linux-iscsi.sf.net + http://open-iscsi.org + +config ISCSI_BOOT_SYSFS + tristate "iSCSI Boot Sysfs Interface" + default n + help + This option enables support for exposing iSCSI boot information + via sysfs to userspace. If you wish to export this information, + say Y. Otherwise, say N. + +source "drivers/scsi/cxgbi/Kconfig" +source "drivers/scsi/bnx2i/Kconfig" +source "drivers/scsi/bnx2fc/Kconfig" +source "drivers/scsi/be2iscsi/Kconfig" config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" - depends on SGI_IP22 && SCSI + depends on SGI_HAS_WD93 && SCSI help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. -config SCSI_DECNCR - tristate "DEC NCR53C94 Scsi Driver" - depends on MACH_DECSTATION && SCSI && TC - help - Say Y here to support the NCR53C94 SCSI controller chips on IOASIC - based TURBOchannel DECstations and TURBOchannel PMAZ-A cards. - -config SCSI_DECSII - tristate "DEC SII Scsi Driver" - depends on MACH_DECSTATION && SCSI && 32BIT - config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" depends on PCI && SCSI @@ -310,6 +391,17 @@ config BLK_DEV_3W_XXXX_RAID Please read the comments at the top of <file:drivers/scsi/3w-xxxx.c>. +config SCSI_HPSA + tristate "HP Smart Array SCSI driver" + depends on PCI && SCSI + select CHECK_SIGNATURE + help + This driver supports HP Smart Array Controllers (circa 2009). + It is a SCSI alternative to the cciss driver, which is a block + driver. Anyone wishing to use HP Smart Array controllers who + would prefer the devices be presented to linux as SCSI devices, + rather than as generic block devices should say Y here. + config SCSI_3W_9XXX tristate "3ware 9xxx SATA-RAID support" depends on PCI && SCSI @@ -321,9 +413,21 @@ config SCSI_3W_9XXX Please read the comments at the top of <file:drivers/scsi/3w-9xxx.c>. +config SCSI_3W_SAS + tristate "3ware 97xx SAS/SATA-RAID support" + depends on PCI && SCSI + help + This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards. + + <http://www.lsi.com> + + Please read the comments at the top of + <file:drivers/scsi/3w-sas.c>. + config SCSI_7000FASST tristate "7000FASST SCSI support" depends on ISA && SCSI && ISA_DMA_API + select CHECK_SIGNATURE help This driver supports the Western Digital 7000 SCSI host adapter family. Some information is in the source: @@ -343,8 +447,9 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" - depends on ISA && SCSI && !64BIT + depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -397,54 +502,22 @@ config SCSI_AACRAID source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" +source "drivers/scsi/aic7xxx/Kconfig.aic79xx" +source "drivers/scsi/aic94xx/Kconfig" +source "drivers/scsi/mvsas/Kconfig" -config SCSI_AIC7XXX_OLD - tristate "Adaptec AIC7xxx support (old driver)" - depends on (ISA || EISA || PCI ) && SCSI - help - WARNING This driver is an older aic7xxx driver and is no longer - under active development. Adaptec, Inc. is writing a new driver to - take the place of this one, and it is recommended that whenever - possible, people should use the new Adaptec written driver instead - of this one. This driver will eventually be phased out entirely. - - This is support for the various aic7xxx based Adaptec SCSI - controllers. These include the 274x EISA cards; 284x VLB cards; - 2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and - motherboard based SCSI controllers from Adaptec. It does not support - the AAA-13x RAID controllers from Adaptec, nor will it likely ever - support them. It does not support the 2920 cards from Adaptec that - use the Future Domain SCSI controller chip. For those cards, you - need the "Future Domain 16xx SCSI support" driver. - - In general, if the controller is based on an Adaptec SCSI controller - chip from the aic777x series or the aic78xx series, this driver - should work. The only exception is the 7810 which is specifically - not supported (that's the RAID controller chip on the AAA-13x - cards). - - Note that the AHA2920 SCSI host adapter is *not* supported by this - driver; choose "Future Domain 16xx SCSI support" instead if you have - one of those. - - Information on the configuration options for this controller can be - found by checking the help file for each of the available - configuration options. You should read - <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before - contacting the maintainer with any questions. The SCSI-HOWTO, - available from <http://www.tldp.org/docs.html#howto>, can also - be of great help. +config SCSI_MVUMI + tristate "Marvell UMI driver" + depends on SCSI && PCI + help + Module for Marvell Universal Message Interface(UMI) driver To compile this driver as a module, choose M here: the - module will be called aic7xxx_old. + module will be called mvumi. -source "drivers/scsi/aic7xxx/Kconfig.aic79xx" -source "drivers/scsi/aic94xx/Kconfig" - -# All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " - depends on !64BIT && SCSI && PCI + depends on SCSI && PCI && VIRT_TO_BUS help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained @@ -455,9 +528,8 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" - depends on SCSI + depends on SCSI && VIRT_TO_BUS depends on ISA || EISA || PCI - depends on BROKEN || X86_32 help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in @@ -479,26 +551,29 @@ config SCSI_IN2000 module will be called in2000. config SCSI_ARCMSR - tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support" + tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" depends on PCI && SCSI help - This driver supports all of ARECA's SATA RAID controller cards. + This driver supports all of ARECA's SATA/SAS RAID controller cards. This is an ARECA-maintained driver by Erich Chen. - If you have any problems, please mail to: < erich@areca.com.tw > + If you have any problems, please mail to: <erich@areca.com.tw>. Areca supports Linux RAID config tools. - - < http://www.areca.com.tw > + Please link <http://www.areca.com.tw> To compile this driver as a module, choose M here: the module will be called arcmsr (modprobe arcmsr). +source "drivers/scsi/esas2r/Kconfig" source "drivers/scsi/megaraid/Kconfig.megaraid" +source "drivers/scsi/mpt2sas/Kconfig" +source "drivers/scsi/mpt3sas/Kconfig" +source "drivers/scsi/ufs/Kconfig" config SCSI_HPTIOP - tristate "HighPoint RocketRAID 3xxx Controller support" + tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" depends on SCSI && PCI help - This option enables support for HighPoint RocketRAID 3xxx + This option enables support for HighPoint RocketRAID 3xxx/4xxx controllers. To compile this driver as a module, choose M here; the module @@ -506,25 +581,73 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" - depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API + depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS ---help--- This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, and the files <file:Documentation/scsi/BusLogic.txt> and <file:Documentation/scsi/FlashPoint.txt> for more information. + Note that support for FlashPoint is only available for 32-bit + x86 configurations. To compile this driver as a module, choose M here: the module will be called BusLogic. -config SCSI_OMIT_FLASHPOINT - bool "Omit FlashPoint support" - depends on SCSI_BUSLOGIC +config SCSI_FLASHPOINT + bool "FlashPoint support" + depends on SCSI_BUSLOGIC && PCI help - This option allows you to omit the FlashPoint support from the + This option allows you to add FlashPoint support to the BusLogic SCSI driver. The FlashPoint SCCB Manager code is - substantial, so users of MultiMaster Host Adapters may wish to omit - it. + substantial, so users of MultiMaster Host Adapters may not + wish to include it. + +config VMWARE_PVSCSI + tristate "VMware PVSCSI driver support" + depends on PCI && SCSI && X86 + help + This driver supports VMware's para virtualized SCSI HBA. + To compile this driver as a module, choose M here: the + module will be called vmw_pvscsi. + +config HYPERV_STORAGE + tristate "Microsoft Hyper-V virtual storage driver" + depends on SCSI && HYPERV + default HYPERV + help + Select this option to enable the Hyper-V virtual storage driver. + +config LIBFC + tristate "LibFC module" + select SCSI_FC_ATTRS + select CRC32 + ---help--- + Fibre Channel library module + +config LIBFCOE + tristate "LibFCoE module" + select LIBFC + ---help--- + Library for Fibre Channel over Ethernet module + +config FCOE + tristate "FCoE module" + depends on PCI + select LIBFCOE + ---help--- + Fibre Channel over Ethernet module + +config FCOE_FNIC + tristate "Cisco FNIC Driver" + depends on PCI && X86 + select LIBFCOE + help + This is support for the Cisco PCI-Express FCoE HBA. + + To compile this driver as a module, choose M here and read + <file:Documentation/scsi/scsi.txt>. + The module will be called fnic. config SCSI_DMX3191D tristate "DMX3191D SCSI support" @@ -540,6 +663,7 @@ config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -614,6 +738,7 @@ config SCSI_EATA_PIO config SCSI_FUTURE_DOMAIN tristate "Future Domain 16xx SCSI/AHA-2920A support" depends on (ISA || PCI) && SCSI + select CHECK_SIGNATURE ---help--- This is support for Future Domain's 16-bit SCSI host adapters (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and @@ -630,19 +755,6 @@ config SCSI_FUTURE_DOMAIN To compile this driver as a module, choose M here: the module will be called fdomain. -config SCSI_FD_MCS - tristate "Future Domain MCS-600/700 SCSI support" - depends on MCA_LEGACY && SCSI - ---help--- - This is support for Future Domain MCS 600/700 MCA SCSI adapters. - Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which - is identical to the MCS 700 and hence also supported by this driver. - This driver also supports the Reply SB16/SCSI card (the SCSI part). - It supports multiple adapters in the same system. - - To compile this driver as a module, choose M here: the - module will be called fd_mcs. - config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API @@ -652,11 +764,20 @@ config SCSI_GDTH This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) manufactured by Intel Corporation/ICP vortex GmbH. It is documented in the kernel source in <file:drivers/scsi/gdth.c> and - <file:drivers/scsi/gdth.h.> + <file:drivers/scsi/gdth.h>. To compile this driver as a module, choose M here: the module will be called gdth. +config SCSI_ISCI + tristate "Intel(R) C600 Series Chipset SAS Controller" + depends on PCI && SCSI + depends on X86 + select SCSI_SAS_LIBSAS + ---help--- + This driver supports the 6Gb/s SAS capabilities of the storage + control unit found in the Intel(R) C600 series chipset. + config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI @@ -703,82 +824,13 @@ config SCSI_GENERIC_NCR53C400 not detect your card. See the file <file:Documentation/scsi/g_NCR5380.txt> for details. -config SCSI_IBMMCA - tristate "IBMMCA SCSI support" - depends on MCA_LEGACY && SCSI - ---help--- - This is support for the IBM SCSI adapter found in many of the PS/2 - series computers. These machines have an MCA bus, so you need to - answer Y to "MCA support" as well and read - <file:Documentation/mca.txt>. - - If the adapter isn't found during boot (a common problem for models - 56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel - option, where <pun> is the id of the SCSI subsystem (usually 7, but - if that doesn't work check your reference diskette). Owners of - model 95 with a LED-matrix-display can in addition activate some - activity info like under OS/2, but more informative, by setting - 'ibmmcascsi=display' as an additional kernel parameter. Try "man - bootparam" or see the documentation of your boot loader about how to - pass options to the kernel. - - To compile this driver as a module, choose M here: the - module will be called ibmmca. - -config IBMMCA_SCSI_ORDER_STANDARD - bool "Standard SCSI-order" - depends on SCSI_IBMMCA - ---help--- - In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks - are assigned to the drive letters, starting with the lowest SCSI-id - (physical number -- pun) to be drive C:, as seen from DOS and - similar operating systems. When looking into papers describing the - ANSI-SCSI-standard, this assignment of drives appears to be wrong. - The SCSI-standard follows a hardware-hierarchy which says that id 7 - has the highest priority and id 0 the lowest. Therefore, the host - adapters are still today everywhere placed as SCSI-id 7 by default. - In the SCSI-standard, the drive letters express the priority of the - disk. C: should be the hard disk, or a partition on it, with the - highest priority. This must therefore be the disk with the highest - SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the - original definition of the SCSI-standard as also industrial- and - process-control-machines, like VME-CPUs running under realtime-OSes - (e.g. LynxOS, OS9) do. - - If you like to run Linux on your MCA-machine with the same - assignment of hard disks as seen from e.g. DOS or OS/2 on your - machine, which is in addition conformant to the SCSI-standard, you - must say Y here. This is also necessary for MCA-Linux users who want - to keep downward compatibility to older releases of the - IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than - June 1997). - - If you like to have the lowest SCSI-id assigned as drive C:, as - modern SCSI-BIOSes do, which does not conform to the standard, but - is widespread and common in the PC-world of today, you must say N - here. If unsure, say Y. - -config IBMMCA_SCSI_DEV_RESET - bool "Reset SCSI-devices at boottime" - depends on SCSI_IBMMCA - ---help--- - By default, SCSI-devices are reset when the machine is powered on. - However, some devices exist, like special-control-devices, - SCSI-CNC-machines, SCSI-printer or scanners of older type, that do - not reset when switched on. If you say Y here, each device connected - to your SCSI-bus will be issued a reset-command after it has been - probed, while the kernel is booting. This may cause problems with - more modern devices, like hard disks, which do not appreciate these - reset commands, and can cause your system to hang. So say Y only if - you know that one of your older devices needs it; N is the safe - answer. - config SCSI_IPS tristate "IBM ServeRAID support" depends on PCI && SCSI ---help--- This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> for more information. If this driver does not work correctly without modification please contact the author by email at <ipslinux@adaptec.com>. @@ -788,12 +840,46 @@ config SCSI_IPS config SCSI_IBMVSCSI tristate "IBM Virtual SCSI support" - depends on PPC_PSERIES || PPC_ISERIES + depends on PPC_PSERIES + select SCSI_SRP_ATTRS help This is the IBM POWER Virtual SCSI Client To compile this driver as a module, choose M here: the - module will be called ibmvscsic. + module will be called ibmvscsi. + +config SCSI_IBMVSCSIS + tristate "IBM Virtual SCSI Server support" + depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS + help + This is the SRP target driver for IBM pSeries virtual environments. + + The userspace component needed to initialize the driver and + documentation can be found: + + http://stgt.berlios.de/ + + To compile this driver as a module, choose M here: the + module will be called ibmvstgt. + +config SCSI_IBMVFC + tristate "IBM Virtual FC support" + depends on PPC_PSERIES && SCSI + select SCSI_FC_ATTRS + help + This is the IBM POWER Virtual FC Client + + To compile this driver as a module, choose M here: the + module will be called ibmvfc. + +config SCSI_IBMVFC_TRACE + bool "enable driver internal trace" + depends on SCSI_IBMVFC + default y + help + If you say Y here, the driver will trace all commands issued + to the adapter. Performance impact is minimal. Trace can be + dumped using /sys/class/scsi_host/hostXX/trace. config SCSI_INITIO tristate "Initio 9100U(W) support" @@ -933,6 +1019,15 @@ config SCSI_LASI700 many PA-RISC workstations & servers. If you do not know whether you have a Lasi chip, it is safe to say "Y" here. +config SCSI_SNI_53C710 + tristate "SNI RM SCSI support for 53c710" + depends on SNI_RM && SCSI + select SCSI_SPI_ATTRS + select 53C700_LE_ON_BE + help + This is a driver for the onboard SCSI controller found in older + SNI RM workstations & servers. + config 53C700_LE_ON_BE bool depends on SCSI_LASI700 @@ -942,8 +1037,18 @@ config SCSI_STEX tristate "Promise SuperTrak EX Series support" depends on PCI && SCSI ---help--- - This driver supports Promise SuperTrak EX8350/8300/16350/16300 - Storage controllers. + This driver supports Promise SuperTrak EX series storage controllers. + + Promise provides Linux RAID configuration utility for these + controllers. Please visit <http://www.promise.com> to download. + + To compile this driver as a module, choose M here: the + module will be called stex. + +config 53C700_BE_BUS + bool + depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI + default y config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" @@ -1014,7 +1119,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" - depends on PCI && SCSI + depends on PCI && SCSI && ATA select FW_LOADER ---help--- This driver supports the IBM Power Linux family RAID adapters. @@ -1024,6 +1129,7 @@ config SCSI_IPR config SCSI_IPR_TRACE bool "enable driver internal trace" depends on SCSI_IPR + default y help If you say Y here, the driver will trace all commands issued to the adapter. Performance impact is minimal. Trace can be @@ -1032,6 +1138,7 @@ config SCSI_IPR_TRACE config SCSI_IPR_DUMP bool "enable adapter dump support" depends on SCSI_IPR + default y help If you say Y here, the driver will support adapter crash dump. If you enable this support, the iprdump daemon can be used @@ -1137,17 +1244,6 @@ config SCSI_NCR53C8XX_SYNC There is no safe option other than using good cabling, right terminations and SCSI conformant devices. -config SCSI_NCR53C8XX_PROFILE - bool "enable profiling" - depends on SCSI_ZALON || SCSI_NCR_Q720 - help - This option allows you to enable profiling information gathering. - These statistics are not very accurate due to the low frequency - of the kernel clock (100 Hz on i386) and have performance impact - on systems that use very fast devices. - - The normal answer therefore is N. - config SCSI_NCR53C8XX_NO_DISCONNECT bool "not allow targets to disconnect" depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 @@ -1158,17 +1254,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT not allow targets to disconnect is not reasonable if there is more than 1 device on a SCSI bus. The normal answer therefore is N. -config SCSI_MCA_53C9X - tristate "NCR MCA 53C9x SCSI support" - depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP - help - Some MicroChannel machines, notably the NCR 35xx line, use a SCSI - controller based on the NCR 53C94. This driver will allow use of - the controller on the 3550, and very possibly others. - - To compile this driver as a module, choose M here: the - module will be called mca_53c9x. - config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI @@ -1183,17 +1268,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PSI240I - tristate "PSI240i support" - depends on ISA && SCSI - help - This is support for the PSI240i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the - module will be called psi240i. - config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" depends on ISA && SCSI @@ -1214,14 +1288,6 @@ config SCSI_QLOGIC_FAS To compile this driver as a module, choose M here: the module will be called qlogicfas. -config SCSI_QLOGIC_FC_FIRMWARE - bool "Include loadable firmware in driver" - depends on SCSI_QLOGIC_FC - help - Say Y to include ISP2X00 Fabric Initiator/Target Firmware, with - expanded LUN addressing and FcTape (FCP-2) support, in the - qlogicfc driver. This is required on some platforms. - config SCSI_QLOGIC_1280 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" depends on PCI && SCSI @@ -1244,43 +1310,33 @@ config SCSI_QLOGICPTI module will be called qlogicpti. source "drivers/scsi/qla2xxx/Kconfig" +source "drivers/scsi/qla4xxx/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" depends on PCI && SCSI select SCSI_FC_ATTRS + select CRC_T10DIF help This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. -config SCSI_SEAGATE - tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI && BROKEN - ---help--- - These are 8-bit SCSI controllers; the ST-01 is also supported by - this driver. It is explained in section 3.9 of the SCSI-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. If it - doesn't work out of the box, you may have to change some settings in - <file:drivers/scsi/seagate.h>. - - To compile this driver as a module, choose M here: the - module will be called seagate. +config SCSI_LPFC_DEBUG_FS + bool "Emulex LightPulse Fibre Channel debugfs Support" + depends on SCSI_LPFC && DEBUG_FS + help + This makes debugging information from the lpfc driver + available via the debugfs filesystem. -# definitely looks not 64bit safe: config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on (EISA || MCA) && SCSI select SCSI_SPI_ATTRS ---help--- - This driver for NCR53c710 based SCSI host adapters. + This driver is for NCR53c710 based SCSI host adapters. It currently supports Compaq EISA cards and NCR MCA cards -config 53C700_IO_MAPPED - bool - depends on SCSI_SIM710 - default y - config SCSI_SYM53C416 tristate "Symbios 53c416 SCSI support" depends on ISA && SCSI @@ -1300,8 +1356,8 @@ config SCSI_SYM53C416 module will be called sym53c416. config SCSI_DC395x - tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)" - depends on PCI && SCSI && EXPERIMENTAL + tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" + depends on PCI && SCSI ---help--- This driver supports PCI SCSI host adapters based on the ASIC TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. @@ -1334,6 +1390,7 @@ config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1426,13 +1483,14 @@ config SCSI_NSP32 config SCSI_DEBUG tristate "SCSI debugging host simulator" depends on SCSI + select CRC_T10DIF help This is a host adapter simulator that can simulate multiple hosts each with multiple dummy SCSI devices (disks). It defaults to one host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple dummy disks are simulated, they share the same kernel RAM for - their storage. See <http://www.torque.net/sg/sdebug.html> for more + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N. @@ -1484,6 +1542,7 @@ source "drivers/scsi/arm/Kconfig" config JAZZ_ESP bool "MIPS JAZZ FAS216 SCSI support" depends on MACH_JAZZ && SCSI + select SCSI_SPI_ATTRS help This is the driver for the onboard SCSI host adapter of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM @@ -1497,7 +1556,7 @@ config A3000_SCSI built-in SCSI controller, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a3000. config A2091_SCSI tristate "A2091/A590 WD33C93A support" @@ -1507,7 +1566,7 @@ config A2091_SCSI say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a2091. config GVP11_SCSI tristate "GVP Series II WD33C93A support" @@ -1522,52 +1581,25 @@ config GVP11_SCSI To compile this driver as a module, choose M here: the module will be called gvp11. -config CYBERSTORM_SCSI - tristate "CyberStorm SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with an original (MkI) Phase5 Cyberstorm - accelerator board and the optional Cyberstorm SCSI controller, - answer Y. Otherwise, say N. - -config CYBERSTORMII_SCSI - tristate "CyberStorm Mk II SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board - and the optional Cyberstorm SCSI controller, say Y. Otherwise, - answer N. - -config BLZ2060_SCSI - tristate "Blizzard 2060 SCSI support" - depends on ZORRO && SCSI +config SCSI_A4000T + tristate "A4000T NCR53c710 SCSI support" + depends on AMIGA && SCSI + select SCSI_SPI_ATTRS help - If you have an Amiga with a Phase5 Blizzard 2060 accelerator board - and want to use the onboard SCSI controller, say Y. Otherwise, - answer N. + If you have an Amiga 4000T and have SCSI devices connected to the + built-in SCSI controller, say Y. Otherwise, say N. -config BLZ1230_SCSI - tristate "Blizzard 1230IV/1260 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard - 1260 accelerator, and the optional SCSI module, say Y. Otherwise, - say N. + To compile this driver as a module, choose M here: the + module will be called a4000t. -config FASTLANE_SCSI - tristate "Fastlane SCSI support" +config SCSI_ZORRO7XX + tristate "Zorro NCR53c710 SCSI support" depends on ZORRO && SCSI + select SCSI_SPI_ATTRS help - If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use - one in the near future, say Y to this question. Otherwise, say N. - -config SCSI_AMIGA7XX - bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)" - depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN - help - Support for various NCR53c710-based SCSI controllers on the Amiga. + Support for various NCR53c710-based SCSI controllers on Zorro + expansion boards for the Amiga. This includes: - - the builtin SCSI controller on the Amiga 4000T, - the Amiga 4091 Zorro III SCSI-2 controller, - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller (info at @@ -1575,24 +1607,12 @@ config SCSI_AMIGA7XX - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. - Note that all of the above SCSI controllers, except for the builtin - SCSI controller on the Amiga 4000T, reside on the Zorro expansion - bus, so you also have to enable Zorro bus support if you want to use - them. - -config OKTAGON_SCSI - tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" - depends on ZORRO && SCSI && EXPERIMENTAL - help - If you have the BSC Oktagon SCSI disk controller for the Amiga, say - Y to this question. If you're in doubt about whether you have one, - see the picture at - <http://amiga.resource.cx/exp/search.pl?product=oktagon>. config ATARI_SCSI tristate "Atari native SCSI support" - depends on ATARI && SCSI && BROKEN + depends on ATARI && SCSI select SCSI_SPI_ATTRS + select NVRAM ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1623,14 +1643,6 @@ config ATARI_SCSI_RESET_BOOT boot process fractionally longer but may assist recovery from errors that leave the devices with SCSI operations partway completed. -config TT_DMA_EMUL - bool "Hades SCSI DMA emulator" - depends on ATARI_SCSI && HADES - help - This option enables code which emulates the TT SCSI DMA chip on the - Hades. This increases the SCSI transfer rates at least ten times - compared to PIO transfers. - config MAC_SCSI bool "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y @@ -1644,14 +1656,13 @@ config MAC_SCSI config SCSI_MAC_ESP tristate "Macintosh NCR53c9[46] SCSI" depends on MAC && SCSI + select SCSI_SPI_ATTRS help This is the NCR 53c9x SCSI controller found on most of the 68040 - based Macintoshes. If you have one of these say Y and read the - SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + based Macintoshes. - To compile this driver as a module, choose M here: the - module will be called mac_esp. + To compile this driver as a module, choose M here: the module + will be called mac_esp. config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" @@ -1662,8 +1673,8 @@ config MVME147_SCSI single-board computer. config MVME16x_SCSI - bool "NCR53C710 SCSI driver for MVME16x" - depends on MVME16x && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for MVME16x" + depends on MVME16x && SCSI select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 @@ -1671,25 +1682,17 @@ config MVME16x_SCSI will want to say Y to this question. config BVME6000_SCSI - bool "NCR53C710 SCSI driver for BVME6000" - depends on BVME6000 && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for BVME6000" + depends on BVME6000 && SCSI select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards will want to say Y to this question. -config SCSI_NCR53C7xx_FAST - bool "allow FAST-SCSI [10MHz]" - depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI - help - This will enable 10MHz FAST-SCSI transfers with your host - adapter. Some systems have problems with that speed, so it's safest - to say N here. - config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" - depends on SUN3 && SCSI && BROKEN + depends on SUN3 && SCSI select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 @@ -1701,6 +1704,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" depends on SUN3X && SCSI=y + select SCSI_SPI_ATTRS help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. @@ -1708,14 +1712,15 @@ config SUN3X_ESP config SCSI_SUNESP tristate "Sparc ESP Scsi Driver" depends on SBUS && SCSI + select SCSI_SPI_ATTRS help This is the driver for the Sun ESP SCSI host adapter. The ESP - chipset is present in most SPARC SBUS-based computers. + chipset is present in most SPARC SBUS-based computers and + supports the Emulex family of ESP SCSI chips (esp100, esp100A, + esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. To compile this driver as a module, choose M here: the - module will be called esp. - -# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI + module will be called sun_esp. config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" @@ -1729,10 +1734,58 @@ config ZFCP This driver is also available as a module. This module will be called zfcp. If you want to compile it as a module, say M here - and read <file:Documentation/modules.txt>. + and read <file:Documentation/kbuild/modules.txt>. -endmenu +config SCSI_PMCRAID + tristate "PMC SIERRA Linux MaxRAID adapter support" + depends on PCI && SCSI && NET + ---help--- + This driver supports the PMC SIERRA MaxRAID adapters. + +config SCSI_PM8001 + tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver" + depends on PCI && SCSI + select SCSI_SAS_LIBSAS + help + This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip + based host adapters. + +config SCSI_SRP + tristate "SCSI RDMA Protocol helper library" + depends on SCSI && PCI + select SCSI_TGT + help + If you wish to use SRP target drivers, say Y. + + To compile this driver as a module, choose M here: the + module will be called libsrp. + +config SCSI_BFA_FC + tristate "Brocade BFA Fibre Channel Support" + depends on PCI && SCSI + select SCSI_FC_ATTRS + help + This bfa driver supports all Brocade PCIe FC/FCOE host adapters. + + To compile this driver as a module, choose M here. The module will + be called bfa. + +config SCSI_VIRTIO + tristate "virtio-scsi support" + depends on VIRTIO + select BLK_DEV_INTEGRITY + help + This is the virtual HBA driver for virtio. If the kernel will + be used in a virtual machine, say Y or M. + +source "drivers/scsi/csiostor/Kconfig" + +endif # SCSI_LOWLEVEL source "drivers/scsi/pcmcia/Kconfig" +source "drivers/scsi/device_handler/Kconfig" + +source "drivers/scsi/osd/Kconfig" + endmenu |