diff options
Diffstat (limited to 'drivers/regulator/max8952.c')
| -rw-r--r-- | drivers/regulator/max8952.c | 103 |
1 files changed, 84 insertions, 19 deletions
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index 355ca7bad9d..c2792f0271a 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -28,6 +28,9 @@ #include <linux/regulator/max8952.h> #include <linux/gpio.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regulator/of_regulator.h> #include <linux/slab.h> /* Registers */ @@ -45,9 +48,7 @@ enum { struct max8952_data { struct i2c_client *client; - struct device *dev; struct max8952_platform_data *pdata; - struct regulator_dev *rdev; bool vid0; bool vid1; @@ -56,6 +57,7 @@ struct max8952_data { static int max8952_read_reg(struct max8952_data *max8952, u8 reg) { int ret = i2c_smbus_read_byte_data(max8952->client, reg); + if (ret > 0) ret &= 0xff; @@ -126,16 +128,81 @@ static const struct regulator_desc regulator = { .owner = THIS_MODULE, }; -static int __devinit max8952_pmic_probe(struct i2c_client *client, +#ifdef CONFIG_OF +static const struct of_device_id max8952_dt_match[] = { + { .compatible = "maxim,max8952" }, + {}, +}; +MODULE_DEVICE_TABLE(of, max8952_dt_match); + +static struct max8952_platform_data *max8952_parse_dt(struct device *dev) +{ + struct max8952_platform_data *pd; + struct device_node *np = dev->of_node; + int ret; + int i; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return NULL; + + pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0); + pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1); + pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0); + + if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode)) + dev_warn(dev, "Default mode not specified, assuming 0\n"); + + ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt", + pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode)); + if (ret) { + dev_err(dev, "max8952,dvs-mode-microvolt property not specified"); + return NULL; + } + + for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) { + if (pd->dvs_mode[i] < 770000 || pd->dvs_mode[i] > 1400000) { + dev_err(dev, "DVS voltage %d out of range\n", i); + return NULL; + } + pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000; + } + + if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq)) + dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n"); + + if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed)) + dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n"); + + pd->reg_data = of_get_regulator_init_data(dev, np); + if (!pd->reg_data) { + dev_err(dev, "Failed to parse regulator init data\n"); + return NULL; + } + + return pd; +} +#else +static struct max8952_platform_data *max8952_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + +static int max8952_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); - struct max8952_platform_data *pdata = client->dev.platform_data; + struct max8952_platform_data *pdata = dev_get_platdata(&client->dev); struct regulator_config config = { }; struct max8952_data *max8952; + struct regulator_dev *rdev; int ret = 0, err = 0; + if (client->dev.of_node) + pdata = max8952_parse_dt(&client->dev); + if (!pdata) { dev_err(&client->dev, "Require the platform data\n"); return -EINVAL; @@ -150,22 +217,22 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client, return -ENOMEM; max8952->client = client; - max8952->dev = &client->dev; max8952->pdata = pdata; - config.dev = max8952->dev; - config.init_data = &pdata->reg_data; + config.dev = &client->dev; + config.init_data = pdata->reg_data; config.driver_data = max8952; + config.of_node = client->dev.of_node; config.ena_gpio = pdata->gpio_en; - if (pdata->reg_data.constraints.boot_on) + if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; - max8952->rdev = regulator_register(®ulator, &config); + rdev = devm_regulator_register(&client->dev, ®ulator, &config); - if (IS_ERR(max8952->rdev)) { - ret = PTR_ERR(max8952->rdev); - dev_err(max8952->dev, "regulator init failed (%d)\n", ret); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&client->dev, "regulator init failed (%d)\n", ret); return ret; } @@ -193,7 +260,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client, err = 3; if (err) { - dev_warn(max8952->dev, "VID0/1 gpio invalid: " + dev_warn(&client->dev, "VID0/1 gpio invalid: " "DVS not available.\n"); max8952->vid0 = 0; max8952->vid1 = 0; @@ -204,7 +271,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client, /* Disable Pulldown of EN only */ max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60); - dev_err(max8952->dev, "DVS modes disabled because VID0 and VID1" + dev_err(&client->dev, "DVS modes disabled because VID0 and VID1" " do not have proper controls.\n"); } else { /* @@ -247,13 +314,10 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client, return 0; } -static int __devexit max8952_pmic_remove(struct i2c_client *client) +static int max8952_pmic_remove(struct i2c_client *client) { struct max8952_data *max8952 = i2c_get_clientdata(client); struct max8952_platform_data *pdata = max8952->pdata; - struct regulator_dev *rdev = max8952->rdev; - - regulator_unregister(rdev); gpio_free(pdata->gpio_vid0); gpio_free(pdata->gpio_vid1); @@ -268,9 +332,10 @@ MODULE_DEVICE_TABLE(i2c, max8952_ids); static struct i2c_driver max8952_pmic_driver = { .probe = max8952_pmic_probe, - .remove = __devexit_p(max8952_pmic_remove), + .remove = max8952_pmic_remove, .driver = { .name = "max8952", + .of_match_table = of_match_ptr(max8952_dt_match), }, .id_table = max8952_ids, }; |