diff options
Diffstat (limited to 'drivers/regulator/core.c')
| -rw-r--r-- | drivers/regulator/core.c | 1465 |
1 files changed, 912 insertions, 553 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 8b4b3829d9e..4c1f999041d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/suspend.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/regulator/of_regulator.h> @@ -35,6 +36,7 @@ #include <trace/events/regulator.h> #include "dummy.h" +#include "internal.h" #define rdev_crit(rdev, fmt, ...) \ pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) @@ -50,8 +52,9 @@ static DEFINE_MUTEX(regulator_list_mutex); static LIST_HEAD(regulator_list); static LIST_HEAD(regulator_map_list); +static LIST_HEAD(regulator_ena_gpio_list); +static LIST_HEAD(regulator_supply_alias_list); static bool has_full_constraints; -static bool board_wants_dummy_regulator; static struct dentry *debugfs_root; @@ -68,21 +71,29 @@ struct regulator_map { }; /* - * struct regulator + * struct regulator_enable_gpio * - * One for each consumer device. + * Management for shared enable GPIO pin */ -struct regulator { - struct device *dev; +struct regulator_enable_gpio { struct list_head list; - unsigned int always_on:1; - int uA_load; - int min_uV; - int max_uV; - char *supply_name; - struct device_attribute dev_attr; - struct regulator_dev *rdev; - struct dentry *debugfs; + int gpio; + u32 enable_count; /* a number of enabled shared GPIO */ + u32 request_count; /* a number of requested shared GPIO */ + unsigned int ena_gpio_invert:1; +}; + +/* + * struct regulator_supply_alias + * + * Used to map lookups for a supply onto an alternative device. + */ +struct regulator_supply_alias { + struct list_head list; + struct device *src_dev; + const char *src_supply; + struct device *alias_dev; + const char *alias_supply; }; static int _regulator_is_enabled(struct regulator_dev *rdev); @@ -108,26 +119,9 @@ static const char *rdev_get_name(struct regulator_dev *rdev) return ""; } -/* gets the regulator for a given consumer device */ -static struct regulator *get_device_regulator(struct device *dev) +static bool have_full_constraints(void) { - struct regulator *regulator = NULL; - struct regulator_dev *rdev; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - mutex_lock(&rdev->mutex); - list_for_each_entry(regulator, &rdev->consumer_list, list) { - if (regulator->dev == dev) { - mutex_unlock(&rdev->mutex); - mutex_unlock(®ulator_list_mutex); - return regulator; - } - } - mutex_unlock(&rdev->mutex); - } - mutex_unlock(®ulator_list_mutex); - return NULL; + return has_full_constraints || of_have_populated_dt(); } /** @@ -136,7 +130,7 @@ static struct regulator *get_device_regulator(struct device *dev) * @supply: regulator supply name * * Extract the regulator device node corresponding to the supply name. - * retruns the device node corresponding to the regulator if found, else + * returns the device node corresponding to the regulator if found, else * returns NULL. */ static struct device_node *of_get_regulator(struct device *dev, const char *supply) @@ -219,8 +213,11 @@ static int regulator_check_consumers(struct regulator_dev *rdev, *min_uV = regulator->min_uV; } - if (*min_uV > *max_uV) + if (*min_uV > *max_uV) { + rdev_err(rdev, "Restricting voltage, %u-%uuV\n", + *min_uV, *max_uV); return -EINVAL; + } return 0; } @@ -303,18 +300,6 @@ static int regulator_check_drms(struct regulator_dev *rdev) return 0; } -static ssize_t device_requested_uA_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct regulator *regulator; - - regulator = get_device_regulator(dev); - if (regulator == NULL) - return 0; - - return sprintf(buf, "%d\n", regulator->uA_load); -} - static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -338,13 +323,14 @@ static ssize_t regulator_uA_show(struct device *dev, } static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL); -static ssize_t regulator_name_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t name_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%s\n", rdev_get_name(rdev)); } +static DEVICE_ATTR_RO(name); static ssize_t regulator_print_opmode(char *buf, int mode) { @@ -427,6 +413,12 @@ static ssize_t regulator_status_show(struct device *dev, case REGULATOR_STATUS_STANDBY: label = "standby"; break; + case REGULATOR_STATUS_BYPASS: + label = "bypass"; + break; + case REGULATOR_STATUS_UNDEFINED: + label = "undefined"; + break; default: return -ERANGE; } @@ -498,15 +490,16 @@ static ssize_t regulator_total_uA_show(struct device *dev, } static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL); -static ssize_t regulator_num_users_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t num_users_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); return sprintf(buf, "%d\n", rdev->use_count); } +static DEVICE_ATTR_RO(num_users); -static ssize_t regulator_type_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t type_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); @@ -518,6 +511,7 @@ static ssize_t regulator_type_show(struct device *dev, } return sprintf(buf, "unknown\n"); } +static DEVICE_ATTR_RO(type); static ssize_t regulator_suspend_mem_uV_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -615,17 +609,39 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, static DEVICE_ATTR(suspend_standby_state, 0444, regulator_suspend_standby_state_show, NULL); +static ssize_t regulator_bypass_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *report; + bool bypass; + int ret; + + ret = rdev->desc->ops->get_bypass(rdev, &bypass); + + if (ret != 0) + report = "unknown"; + else if (bypass) + report = "enabled"; + else + report = "disabled"; + + return sprintf(buf, "%s\n", report); +} +static DEVICE_ATTR(bypass, 0444, + regulator_bypass_show, NULL); /* * These are the only attributes are present for all regulators. * Other attributes are a function of regulator functionality. */ -static struct device_attribute regulator_dev_attrs[] = { - __ATTR(name, 0444, regulator_name_show, NULL), - __ATTR(num_users, 0444, regulator_num_users_show, NULL), - __ATTR(type, 0444, regulator_type_show, NULL), - __ATTR_NULL, +static struct attribute *regulator_dev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_num_users.attr, + &dev_attr_type.attr, + NULL, }; +ATTRIBUTE_GROUPS(regulator_dev); static void regulator_dev_release(struct device *dev) { @@ -636,7 +652,7 @@ static void regulator_dev_release(struct device *dev) static struct class regulator_class = { .name = "regulator", .dev_release = regulator_dev_release, - .dev_attrs = regulator_dev_attrs, + .dev_groups = regulator_dev_groups, }; /* Calculate the new optimum regulator operating mode based on the new total @@ -808,6 +824,9 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); + if (!count) + sprintf(buf, "no parameters"); + rdev_info(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && @@ -825,13 +844,22 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, /* do we need to apply the constraint voltage */ if (rdev->constraints->apply_uV && rdev->constraints->min_uV == rdev->constraints->max_uV) { - ret = _regulator_do_set_voltage(rdev, - rdev->constraints->min_uV, - rdev->constraints->max_uV); - if (ret < 0) { - rdev_err(rdev, "failed to apply %duV constraint\n", - rdev->constraints->min_uV); - return ret; + int current_uV = _regulator_get_voltage(rdev); + if (current_uV < 0) { + rdev_err(rdev, "failed to get the current voltage\n"); + return current_uV; + } + if (current_uV < rdev->constraints->min_uV || + current_uV > rdev->constraints->max_uV) { + ret = _regulator_do_set_voltage( + rdev, rdev->constraints->min_uV, + rdev->constraints->max_uV); + if (ret < 0) { + rdev_err(rdev, + "failed to apply %duV constraint\n", + rdev->constraints->min_uV); + return ret; + } } } @@ -882,7 +910,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, /* final: [min_uV..max_uV] valid iff constraints valid */ if (max_uV < min_uV) { - rdev_err(rdev, "unsupportable voltage constraints\n"); + rdev_err(rdev, + "unsupportable voltage constraints %u-%uuV\n", + min_uV, max_uV); return -EINVAL; } @@ -902,6 +932,38 @@ static int machine_constraints_voltage(struct regulator_dev *rdev, return 0; } +static int machine_constraints_current(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + struct regulator_ops *ops = rdev->desc->ops; + int ret; + + if (!constraints->min_uA && !constraints->max_uA) + return 0; + + if (constraints->min_uA > constraints->max_uA) { + rdev_err(rdev, "Invalid current constraints\n"); + return -EINVAL; + } + + if (!ops->set_current_limit || !ops->get_current_limit) { + rdev_warn(rdev, "Operation of current configuration missing\n"); + return 0; + } + + /* Set regulator current in constraints range */ + ret = ops->set_current_limit(rdev, constraints->min_uA, + constraints->max_uA); + if (ret < 0) { + rdev_err(rdev, "Failed to set current constraint, %d\n", ret); + return ret; + } + + return 0; +} + +static int _regulator_do_enable(struct regulator_dev *rdev); + /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -932,6 +994,10 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (ret != 0) goto out; + ret = machine_constraints_current(rdev, rdev->constraints); + if (ret != 0) + goto out; + /* do we need to setup our suspend state */ if (rdev->constraints->initial_state) { ret = suspend_prepare(rdev, rdev->constraints->initial_state); @@ -958,15 +1024,23 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* If the constraints say the regulator should be on at this point * and we have control then make sure it is enabled. */ - if ((rdev->constraints->always_on || rdev->constraints->boot_on) && - ops->enable) { - ret = ops->enable(rdev); - if (ret < 0) { + if (rdev->constraints->always_on || rdev->constraints->boot_on) { + ret = _regulator_do_enable(rdev); + if (ret < 0 && ret != -EINVAL) { rdev_err(rdev, "failed to enable\n"); goto out; } } + if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable) + && ops->set_ramp_delay) { + ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); + if (ret < 0) { + rdev_err(rdev, "failed to set ramp_delay\n"); + goto out; + } + } + print_constraints(rdev); return 0; out: @@ -996,6 +1070,7 @@ static int set_supply(struct regulator_dev *rdev, err = -ENOMEM; return err; } + supply_rdev->open_count++; return 0; } @@ -1097,48 +1172,29 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, list_add(®ulator->list, &rdev->consumer_list); if (dev) { - /* create a 'requested_microamps_name' sysfs entry */ - size = scnprintf(buf, REG_STR_SIZE, - "microamps_requested_%s-%s", - dev_name(dev), supply_name); - if (size >= REG_STR_SIZE) - goto overflow_err; - regulator->dev = dev; - sysfs_attr_init(®ulator->dev_attr.attr); - regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL); - if (regulator->dev_attr.attr.name == NULL) - goto attr_name_err; - - regulator->dev_attr.attr.mode = 0444; - regulator->dev_attr.show = device_requested_uA_show; - err = device_create_file(dev, ®ulator->dev_attr); - if (err < 0) { - rdev_warn(rdev, "could not add regulator_dev requested microamps sysfs entry\n"); - goto attr_name_err; - } - /* also add a link to the device sysfs entry */ + /* Add a link to the device sysfs entry */ size = scnprintf(buf, REG_STR_SIZE, "%s-%s", dev->kobj.name, supply_name); if (size >= REG_STR_SIZE) - goto attr_err; + goto overflow_err; regulator->supply_name = kstrdup(buf, GFP_KERNEL); if (regulator->supply_name == NULL) - goto attr_err; + goto overflow_err; err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj, buf); if (err) { rdev_warn(rdev, "could not add device link %s err %d\n", dev->kobj.name, err); - goto link_name_err; + /* non-fatal */ } } else { regulator->supply_name = kstrdup(supply_name, GFP_KERNEL); if (regulator->supply_name == NULL) - goto attr_err; + goto overflow_err; } regulator->debugfs = debugfs_create_dir(regulator->supply_name, @@ -1165,12 +1221,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, mutex_unlock(&rdev->mutex); return regulator; -link_name_err: - kfree(regulator->supply_name); -attr_err: - device_remove_file(regulator->dev, ®ulator->dev_attr); -attr_name_err: - kfree(regulator->dev_attr.attr.name); overflow_err: list_del(®ulator->list); kfree(regulator); @@ -1180,11 +1230,39 @@ overflow_err: static int _regulator_get_enable_time(struct regulator_dev *rdev) { + if (rdev->constraints && rdev->constraints->enable_time) + return rdev->constraints->enable_time; if (!rdev->desc->ops->enable_time) - return 0; + return rdev->desc->enable_time; return rdev->desc->ops->enable_time(rdev); } +static struct regulator_supply_alias *regulator_find_supply_alias( + struct device *dev, const char *supply) +{ + struct regulator_supply_alias *map; + + list_for_each_entry(map, ®ulator_supply_alias_list, list) + if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0) + return map; + + return NULL; +} + +static void regulator_supply_alias(struct device **dev, const char **supply) +{ + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(*dev, *supply); + if (map) { + dev_dbg(*dev, "Mapping supply %s to %s,%s\n", + *supply, map->alias_supply, + dev_name(map->alias_dev)); + *dev = map->alias_dev; + *supply = map->alias_supply; + } +} + static struct regulator_dev *regulator_dev_lookup(struct device *dev, const char *supply, int *ret) @@ -1194,6 +1272,8 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, struct regulator_map *map; const char *devname = NULL; + regulator_supply_alias(&dev, &supply); + /* first do a dt based lookup */ if (dev && dev->of_node) { node = of_get_regulator(dev, supply); @@ -1202,6 +1282,8 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, if (r->dev.parent && node == r->dev.of_node) return r; + *ret = -EPROBE_DEFER; + return NULL; } else { /* * If we couldn't even get the node then it's @@ -1237,7 +1319,7 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, /* Internal regulator request function */ static struct regulator *_regulator_get(struct device *dev, const char *id, - int exclusive) + bool exclusive, bool allow_dummy) { struct regulator_dev *rdev; struct regulator *regulator = ERR_PTR(-EPROBE_DEFER); @@ -1246,37 +1328,49 @@ static struct regulator *_regulator_get(struct device *dev, const char *id, if (id == NULL) { pr_err("get() with no identifier\n"); - return regulator; + return ERR_PTR(-EINVAL); } if (dev) devname = dev_name(dev); + if (have_full_constraints()) + ret = -ENODEV; + else + ret = -EPROBE_DEFER; + mutex_lock(®ulator_list_mutex); rdev = regulator_dev_lookup(dev, id, &ret); if (rdev) goto found; - if (board_wants_dummy_regulator) { - rdev = dummy_regulator_rdev; - goto found; - } + regulator = ERR_PTR(ret); + + /* + * If we have return value from dev_lookup fail, we do not expect to + * succeed, so, quit with appropriate error value + */ + if (ret && ret != -ENODEV) + goto out; -#ifdef CONFIG_REGULATOR_DUMMY if (!devname) devname = "deviceless"; - /* If the board didn't flag that it was fully constrained then - * substitute in a dummy regulator so consumers can continue. + /* + * Assume that a regulator is physically present and enabled + * even if it isn't hooked up and just provide a dummy. */ - if (!has_full_constraints) { + if (have_full_constraints() && allow_dummy) { pr_warn("%s supply %s not found, using dummy regulator\n", devname, id); + rdev = dummy_regulator_rdev; goto found; + /* Don't log an error when called from regulator_get_optional() */ + } else if (!have_full_constraints() || exclusive) { + dev_warn(dev, "dummy supplies not allowed\n"); } -#endif mutex_unlock(®ulator_list_mutex); return regulator; @@ -1334,44 +1428,10 @@ out: */ struct regulator *regulator_get(struct device *dev, const char *id) { - return _regulator_get(dev, id, 0); + return _regulator_get(dev, id, false, true); } EXPORT_SYMBOL_GPL(regulator_get); -static void devm_regulator_release(struct device *dev, void *res) -{ - regulator_put(*(struct regulator **)res); -} - -/** - * devm_regulator_get - Resource managed regulator_get() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. - * - * Managed regulator_get(). Regulators returned from this function are - * automatically regulator_put() on driver detach. See regulator_get() for more - * information. - */ -struct regulator *devm_regulator_get(struct device *dev, const char *id) -{ - struct regulator **ptr, *regulator; - - ptr = devres_alloc(devm_regulator_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - regulator = regulator_get(dev, id); - if (!IS_ERR(regulator)) { - *ptr = regulator; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return regulator; -} -EXPORT_SYMBOL_GPL(devm_regulator_get); - /** * regulator_get_exclusive - obtain exclusive access to a regulator. * @dev: device for regulator "consumer" @@ -1379,9 +1439,9 @@ EXPORT_SYMBOL_GPL(devm_regulator_get); * * Returns a struct regulator corresponding to the regulator producer, * or IS_ERR() condition containing errno. Other consumers will be - * unable to obtain this reference is held and the use count for the - * regulator will be initialised to reflect the current state of the - * regulator. + * unable to obtain this regulator while this reference is held and the + * use count for the regulator will be initialised to reflect the current + * state of the regulator. * * This is intended for use by consumers which cannot tolerate shared * use of the regulator such as those which need to force the @@ -1395,36 +1455,51 @@ EXPORT_SYMBOL_GPL(devm_regulator_get); */ struct regulator *regulator_get_exclusive(struct device *dev, const char *id) { - return _regulator_get(dev, id, 1); + return _regulator_get(dev, id, true, false); } EXPORT_SYMBOL_GPL(regulator_get_exclusive); /** - * regulator_put - "free" the regulator source - * @regulator: regulator source + * regulator_get_optional - obtain optional access to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. * - * Note: drivers must ensure that all regulator_enable calls made on this - * regulator source are balanced by regulator_disable calls prior to calling - * this function. + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. + * + * This is intended for use by consumers for devices which can have + * some supplies unconnected in normal use, such as some MMC devices. + * It can allow the regulator core to provide stub supplies for other + * supplies requested using normal regulator_get() calls without + * disrupting the operation of drivers that can handle absent + * supplies. + * + * Use of supply names configured via regulator_set_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. */ -void regulator_put(struct regulator *regulator) +struct regulator *regulator_get_optional(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, false, false); +} +EXPORT_SYMBOL_GPL(regulator_get_optional); + +/* Locks held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) { struct regulator_dev *rdev; if (regulator == NULL || IS_ERR(regulator)) return; - mutex_lock(®ulator_list_mutex); rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); /* remove any sysfs entries */ - if (regulator->dev) { + if (regulator->dev) sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); - device_remove_file(regulator->dev, ®ulator->dev_attr); - kfree(regulator->dev_attr.attr.name); - } kfree(regulator->supply_name); list_del(®ulator->list); kfree(regulator); @@ -1433,45 +1508,328 @@ void regulator_put(struct regulator *regulator) rdev->exclusive = 0; module_put(rdev->owner); +} + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + mutex_lock(®ulator_list_mutex); + _regulator_put(regulator); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_put); -static int devm_regulator_match(struct device *dev, void *res, void *data) +/** + * regulator_register_supply_alias - Provide device alias for supply lookup + * + * @dev: device that will be given as the regulator "consumer" + * @id: Supply name or regulator ID + * @alias_dev: device that should be used to lookup the supply + * @alias_id: Supply name or regulator ID that should be used to lookup the + * supply + * + * All lookups for id on dev will instead be conducted for alias_id on + * alias_dev. + */ +int regulator_register_supply_alias(struct device *dev, const char *id, + struct device *alias_dev, + const char *alias_id) { - struct regulator **r = res; - if (!r || !*r) { - WARN_ON(!r || !*r); - return 0; + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(dev, id); + if (map) + return -EEXIST; + + map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL); + if (!map) + return -ENOMEM; + + map->src_dev = dev; + map->src_supply = id; + map->alias_dev = alias_dev; + map->alias_supply = alias_id; + + list_add(&map->list, ®ulator_supply_alias_list); + + pr_info("Adding alias for supply %s,%s -> %s,%s\n", + id, dev_name(dev), alias_id, dev_name(alias_dev)); + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_register_supply_alias); + +/** + * regulator_unregister_supply_alias - Remove device alias + * + * @dev: device that will be given as the regulator "consumer" + * @id: Supply name or regulator ID + * + * Remove a lookup alias if one exists for id on dev. + */ +void regulator_unregister_supply_alias(struct device *dev, const char *id) +{ + struct regulator_supply_alias *map; + + map = regulator_find_supply_alias(dev, id); + if (map) { + list_del(&map->list); + kfree(map); } - return *r == data; } +EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias); /** - * devm_regulator_put - Resource managed regulator_put() - * @regulator: regulator to free + * regulator_bulk_register_supply_alias - register multiple aliases + * + * @dev: device that will be given as the regulator "consumer" + * @id: List of supply names or regulator IDs + * @alias_dev: device that should be used to lookup the supply + * @alias_id: List of supply names or regulator IDs that should be used to + * lookup the supply + * @num_id: Number of aliases to register + * + * @return 0 on success, an errno on failure. * - * Deallocate a regulator allocated with devm_regulator_get(). Normally - * this function will not need to be called and the resource management - * code will ensure that the resource is freed. + * This helper function allows drivers to register several supply + * aliases in one operation. If any of the aliases cannot be + * registered any aliases that were registered will be removed + * before returning to the caller. */ -void devm_regulator_put(struct regulator *regulator) +int regulator_bulk_register_supply_alias(struct device *dev, + const char *const *id, + struct device *alias_dev, + const char *const *alias_id, + int num_id) { - int rc; + int i; + int ret; - rc = devres_destroy(regulator->dev, devm_regulator_release, - devm_regulator_match, regulator); - if (rc == 0) - regulator_put(regulator); - else - WARN_ON(rc); + for (i = 0; i < num_id; ++i) { + ret = regulator_register_supply_alias(dev, id[i], alias_dev, + alias_id[i]); + if (ret < 0) + goto err; + } + + return 0; + +err: + dev_err(dev, + "Failed to create supply alias %s,%s -> %s,%s\n", + id[i], dev_name(dev), alias_id[i], dev_name(alias_dev)); + + while (--i >= 0) + regulator_unregister_supply_alias(dev, id[i]); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias); + +/** + * regulator_bulk_unregister_supply_alias - unregister multiple aliases + * + * @dev: device that will be given as the regulator "consumer" + * @id: List of supply names or regulator IDs + * @num_id: Number of aliases to unregister + * + * This helper function allows drivers to unregister several supply + * aliases in one operation. + */ +void regulator_bulk_unregister_supply_alias(struct device *dev, + const char *const *id, + int num_id) +{ + int i; + + for (i = 0; i < num_id; ++i) + regulator_unregister_supply_alias(dev, id[i]); +} +EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias); + + +/* Manage enable GPIO list. Same GPIO pin can be shared among regulators */ +static int regulator_ena_gpio_request(struct regulator_dev *rdev, + const struct regulator_config *config) +{ + struct regulator_enable_gpio *pin; + int ret; + + list_for_each_entry(pin, ®ulator_ena_gpio_list, list) { + if (pin->gpio == config->ena_gpio) { + rdev_dbg(rdev, "GPIO %d is already used\n", + config->ena_gpio); + goto update_ena_gpio_to_rdev; + } + } + + ret = gpio_request_one(config->ena_gpio, + GPIOF_DIR_OUT | config->ena_gpio_flags, + rdev_get_name(rdev)); + if (ret) + return ret; + + pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL); + if (pin == NULL) { + gpio_free(config->ena_gpio); + return -ENOMEM; + } + + pin->gpio = config->ena_gpio; + pin->ena_gpio_invert = config->ena_gpio_invert; + list_add(&pin->list, ®ulator_ena_gpio_list); + +update_ena_gpio_to_rdev: + pin->request_count++; + rdev->ena_pin = pin; + return 0; +} + +static void regulator_ena_gpio_free(struct regulator_dev *rdev) +{ + struct regulator_enable_gpio *pin, *n; + + if (!rdev->ena_pin) + return; + + /* Free the GPIO only in case of no use */ + list_for_each_entry_safe(pin, n, ®ulator_ena_gpio_list, list) { + if (pin->gpio == rdev->ena_pin->gpio) { + if (pin->request_count <= 1) { + pin->request_count = 0; + gpio_free(pin->gpio); + list_del(&pin->list); + kfree(pin); + } else { + pin->request_count--; + } + } + } +} + +/** + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * + * GPIO is enabled in case of initial use. (enable_count is 0) + * GPIO is disabled when it is not shared any more. (enable_count <= 1) + */ +static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) +{ + struct regulator_enable_gpio *pin = rdev->ena_pin; + + if (!pin) + return -EINVAL; + + if (enable) { + /* Enable GPIO at initial use */ + if (pin->enable_count == 0) + gpio_set_value_cansleep(pin->gpio, + !pin->ena_gpio_invert); + + pin->enable_count++; + } else { + if (pin->enable_count > 1) { + pin->enable_count--; + return 0; + } + + /* Disable GPIO if not used */ + if (pin->enable_count <= 1) { + gpio_set_value_cansleep(pin->gpio, + pin->ena_gpio_invert); + pin->enable_count = 0; + } + } + + return 0; +} + +static int _regulator_do_enable(struct regulator_dev *rdev) +{ + int ret, delay; + + /* Query before enabling in case configuration dependent. */ + ret = _regulator_get_enable_time(rdev); + if (ret >= 0) { + delay = ret; + } else { + rdev_warn(rdev, "enable_time() failed: %d\n", ret); + delay = 0; + } + + trace_regulator_enable(rdev_get_name(rdev)); + + if (rdev->ena_pin) { + ret = regulator_ena_gpio_ctrl(rdev, true); + if (ret < 0) + return ret; + rdev->ena_gpio_state = 1; + } else if (rdev->desc->ops->enable) { + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) + return ret; + } else { + return -EINVAL; + } + + /* Allow the regulator to ramp; it would be useful to extend + * this for bulk operations so that the regulators can ramp + * together. */ + trace_regulator_enable_delay(rdev_get_name(rdev)); + + /* + * Delay for the requested amount of time as per the guidelines in: + * + * Documentation/timers/timers-howto.txt + * + * The assumption here is that regulators will never be enabled in + * atomic context and therefore sleeping functions can be used. + */ + if (delay) { + unsigned int ms = delay / 1000; + unsigned int us = delay % 1000; + + if (ms > 0) { + /* + * For small enough values, handle super-millisecond + * delays in the usleep_range() call below. + */ + if (ms < 20) + us += ms * 1000; + else + msleep(ms); + } + + /* + * Give the scheduler some room to coalesce with any other + * wakeup sources. For delays shorter than 10 us, don't even + * bother setting up high-resolution timers and just busy- + * loop. + */ + if (us >= 10) + usleep_range(us, us + 100); + else + udelay(us); + } + + trace_regulator_enable_complete(rdev_get_name(rdev)); + + return 0; } -EXPORT_SYMBOL_GPL(devm_regulator_put); /* locks held by regulator_enable() */ static int _regulator_enable(struct regulator_dev *rdev) { - int ret, delay; + int ret; /* check voltage and requested load before enabling */ if (rdev->constraints && @@ -1485,40 +1843,10 @@ static int _regulator_enable(struct regulator_dev *rdev) if (!_regulator_can_change_status(rdev)) return -EPERM; - if (!rdev->desc->ops->enable) - return -EINVAL; - - /* Query before enabling in case configuration - * dependent. */ - ret = _regulator_get_enable_time(rdev); - if (ret >= 0) { - delay = ret; - } else { - rdev_warn(rdev, "enable_time() failed: %d\n", - ret); - delay = 0; - } - - trace_regulator_enable(rdev_get_name(rdev)); - - /* Allow the regulator to ramp; it would be useful - * to extend this for bulk operations so that the - * regulators can ramp together. */ - ret = rdev->desc->ops->enable(rdev); + ret = _regulator_do_enable(rdev); if (ret < 0) return ret; - trace_regulator_enable_delay(rdev_get_name(rdev)); - - if (delay >= 1000) { - mdelay(delay / 1000); - udelay(delay % 1000); - } else if (delay) { - udelay(delay); - } - - trace_regulator_enable_complete(rdev_get_name(rdev)); - } else if (ret < 0) { rdev_err(rdev, "is_enabled() failed: %d\n", ret); return ret; @@ -1567,6 +1895,29 @@ int regulator_enable(struct regulator *regulator) } EXPORT_SYMBOL_GPL(regulator_enable); +static int _regulator_do_disable(struct regulator_dev *rdev) +{ + int ret; + + trace_regulator_disable(rdev_get_name(rdev)); + + if (rdev->ena_pin) { + ret = regulator_ena_gpio_ctrl(rdev, false); + if (ret < 0) + return ret; + rdev->ena_gpio_state = 0; + + } else if (rdev->desc->ops->disable) { + ret = rdev->desc->ops->disable(rdev); + if (ret != 0) + return ret; + } + + trace_regulator_disable_complete(rdev_get_name(rdev)); + + return 0; +} + /* locks held by regulator_disable() */ static int _regulator_disable(struct regulator_dev *rdev) { @@ -1581,20 +1932,14 @@ static int _regulator_disable(struct regulator_dev *rdev) (rdev->constraints && !rdev->constraints->always_on)) { /* we are last user */ - if (_regulator_can_change_status(rdev) && - rdev->desc->ops->disable) { - trace_regulator_disable(rdev_get_name(rdev)); - - ret = rdev->desc->ops->disable(rdev); + if (_regulator_can_change_status(rdev)) { + ret = _regulator_do_disable(rdev); if (ret < 0) { rdev_err(rdev, "failed to disable\n"); return ret; } - - trace_regulator_disable_complete(rdev_get_name(rdev)); - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, - NULL); + NULL); } rdev->use_count = 0; @@ -1647,20 +1992,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; - /* force disable */ - if (rdev->desc->ops->disable) { - /* ah well, who wants to live forever... */ - ret = rdev->desc->ops->disable(rdev); - if (ret < 0) { - rdev_err(rdev, "failed to force disable\n"); - return ret; - } - /* notify other consumers that power has been forced off */ - _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | - REGULATOR_EVENT_DISABLE, NULL); + ret = _regulator_do_disable(rdev); + if (ret < 0) { + rdev_err(rdev, "failed to force disable\n"); + return ret; } - return ret; + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_DISABLE, NULL); + + return 0; } /** @@ -1742,12 +2083,16 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) if (regulator->always_on) return 0; + if (!ms) + return regulator_disable(regulator); + mutex_lock(&rdev->mutex); rdev->deferred_disables++; mutex_unlock(&rdev->mutex); - ret = schedule_delayed_work(&rdev->disable_work, - msecs_to_jiffies(ms)); + ret = queue_delayed_work(system_power_efficient_wq, + &rdev->disable_work, + msecs_to_jiffies(ms)); if (ret < 0) return ret; else @@ -1755,63 +2100,12 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) } EXPORT_SYMBOL_GPL(regulator_disable_deferred); -/** - * regulator_is_enabled_regmap - standard is_enabled() for regmap users - * - * @rdev: regulator to operate on - * - * Regulators that use regmap for their register I/O can set the - * enable_reg and enable_mask fields in their descriptor and then use - * this as their is_enabled operation, saving some code. - */ -int regulator_is_enabled_regmap(struct regulator_dev *rdev) -{ - unsigned int val; - int ret; - - ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); - if (ret != 0) - return ret; - - return (val & rdev->desc->enable_mask) != 0; -} -EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap); - -/** - * regulator_enable_regmap - standard enable() for regmap users - * - * @rdev: regulator to operate on - * - * Regulators that use regmap for their register I/O can set the - * enable_reg and enable_mask fields in their descriptor and then use - * this as their enable() operation, saving some code. - */ -int regulator_enable_regmap(struct regulator_dev *rdev) -{ - return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, - rdev->desc->enable_mask); -} -EXPORT_SYMBOL_GPL(regulator_enable_regmap); - -/** - * regulator_disable_regmap - standard disable() for regmap users - * - * @rdev: regulator to operate on - * - * Regulators that use regmap for their register I/O can set the - * enable_reg and enable_mask fields in their descriptor and then use - * this as their disable() operation, saving some code. - */ -int regulator_disable_regmap(struct regulator_dev *rdev) -{ - return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, 0); -} -EXPORT_SYMBOL_GPL(regulator_disable_regmap); - static int _regulator_is_enabled(struct regulator_dev *rdev) { + /* A GPIO control always takes precedence */ + if (rdev->ena_pin) + return rdev->ena_gpio_state; + /* If we don't know then assume that the regulator is always on */ if (!rdev->desc->ops->is_enabled) return 1; @@ -1847,40 +2141,48 @@ int regulator_is_enabled(struct regulator *regulator) EXPORT_SYMBOL_GPL(regulator_is_enabled); /** - * regulator_count_voltages - count regulator_list_voltage() selectors + * regulator_can_change_voltage - check if regulator can change voltage * @regulator: regulator source * - * Returns number of selectors, or negative errno. Selectors are - * numbered starting at zero, and typically correspond to bitfields - * in hardware registers. + * Returns positive if the regulator driver backing the source/client + * can change its voltage, false otherwise. Useful for detecting fixed + * or dummy regulators and disabling voltage change logic in the client + * driver. */ -int regulator_count_voltages(struct regulator *regulator) +int regulator_can_change_voltage(struct regulator *regulator) { struct regulator_dev *rdev = regulator->rdev; - return rdev->desc->n_voltages ? : -EINVAL; + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1) + return 1; + + if (rdev->desc->continuous_voltage_range && + rdev->constraints->min_uV && rdev->constraints->max_uV && + rdev->constraints->min_uV != rdev->constraints->max_uV) + return 1; + } + + return 0; } -EXPORT_SYMBOL_GPL(regulator_count_voltages); +EXPORT_SYMBOL_GPL(regulator_can_change_voltage); /** - * regulator_list_voltage_linear - List voltages with simple calculation - * - * @rdev: Regulator device - * @selector: Selector to convert into a voltage + * regulator_count_voltages - count regulator_list_voltage() selectors + * @regulator: regulator source * - * Regulators with a simple linear mapping between voltages and - * selectors can set min_uV and uV_step in the regulator descriptor - * and then use this function as their list_voltage() operation, + * Returns number of selectors, or negative errno. Selectors are + * numbered starting at zero, and typically correspond to bitfields + * in hardware registers. */ -int regulator_list_voltage_linear(struct regulator_dev *rdev, - unsigned int selector) +int regulator_count_voltages(struct regulator *regulator) { - if (selector >= rdev->desc->n_voltages) - return -EINVAL; + struct regulator_dev *rdev = regulator->rdev; - return rdev->desc->min_uV + (rdev->desc->uV_step * selector); + return rdev->desc->n_voltages ? : -EINVAL; } -EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); +EXPORT_SYMBOL_GPL(regulator_count_voltages); /** * regulator_list_voltage - enumerate supported voltages @@ -1898,6 +2200,9 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) struct regulator_ops *ops = rdev->desc->ops; int ret; + if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) + return rdev->desc->fixed_uV; + if (!ops->list_voltage || selector >= rdev->desc->n_voltages) return -EINVAL; @@ -1917,6 +2222,21 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) EXPORT_SYMBOL_GPL(regulator_list_voltage); /** + * regulator_get_linear_step - return the voltage step size between VSEL values + * @regulator: regulator source + * + * Returns the voltage step size between VSEL values for linear + * regulators, or return 0 if the regulator isn't a linear regulator. + */ +unsigned int regulator_get_linear_step(struct regulator *regulator) +{ + struct regulator_dev *rdev = regulator->rdev; + + return rdev->desc->uV_step; +} +EXPORT_SYMBOL_GPL(regulator_get_linear_step); + +/** * regulator_is_supported_voltage - check if a voltage range can be supported * * @regulator: Regulator to check. @@ -1928,8 +2248,23 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage); int regulator_is_supported_voltage(struct regulator *regulator, int min_uV, int max_uV) { + struct regulator_dev *rdev = regulator->rdev; int i, voltages, ret; + /* If we can't change voltage check the current voltage */ + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + ret = regulator_get_voltage(regulator); + if (ret >= 0) + return min_uV <= ret && ret <= max_uV; + else + return ret; + } + + /* Any voltage within constrains range is fine? */ + if (rdev->desc->continuous_voltage_range) + return min_uV >= rdev->constraints->min_uV && + max_uV <= rdev->constraints->max_uV; + ret = regulator_count_voltages(regulator); if (ret < 0) return ret; @@ -1946,132 +2281,12 @@ int regulator_is_supported_voltage(struct regulator *regulator, } EXPORT_SYMBOL_GPL(regulator_is_supported_voltage); -/** - * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users - * - * @rdev: regulator to operate on - * - * Regulators that use regmap for their register I/O can set the - * vsel_reg and vsel_mask fields in their descriptor and then use this - * as their get_voltage_vsel operation, saving some code. - */ -int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev) -{ - unsigned int val; - int ret; - - ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); - if (ret != 0) - return ret; - - val &= rdev->desc->vsel_mask; - val >>= ffs(rdev->desc->vsel_mask) - 1; - - return val; -} -EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); - -/** - * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users - * - * @rdev: regulator to operate on - * @sel: Selector to set - * - * Regulators that use regmap for their register I/O can set the - * vsel_reg and vsel_mask fields in their descriptor and then use this - * as their set_voltage_vsel operation, saving some code. - */ -int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) -{ - sel <<= ffs(rdev->desc->vsel_mask) - 1; - - return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, - rdev->desc->vsel_mask, sel); -} -EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); - -/** - * regulator_map_voltage_iterate - map_voltage() based on list_voltage() - * - * @rdev: Regulator to operate on - * @min_uV: Lower bound for voltage - * @max_uV: Upper bound for voltage - * - * Drivers implementing set_voltage_sel() and list_voltage() can use - * this as their map_voltage() operation. It will find a suitable - * voltage by calling list_voltage() until it gets something in bounds - * for the requested voltages. - */ -int regulator_map_voltage_iterate(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - int best_val = INT_MAX; - int selector = 0; - int i, ret; - - /* Find the smallest voltage that falls within the specified - * range. - */ - for (i = 0; i < rdev->desc->n_voltages; i++) { - ret = rdev->desc->ops->list_voltage(rdev, i); - if (ret < 0) - continue; - - if (ret < best_val && ret >= min_uV && ret <= max_uV) { - best_val = ret; - selector = i; - } - } - - if (best_val != INT_MAX) - return selector; - else - return -EINVAL; -} -EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate); - -/** - * regulator_map_voltage_linear - map_voltage() for simple linear mappings - * - * @rdev: Regulator to operate on - * @min_uV: Lower bound for voltage - * @max_uV: Upper bound for voltage - * - * Drivers providing min_uV and uV_step in their regulator_desc can - * use this as their map_voltage() operation. - */ -int regulator_map_voltage_linear(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - int ret, voltage; - - if (!rdev->desc->uV_step) { - BUG_ON(!rdev->desc->uV_step); - return -EINVAL; - } - - if (min_uV < rdev->desc->min_uV) - min_uV = rdev->desc->min_uV; - - ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); - if (ret < 0) - return ret; - - /* Map back into a voltage to verify we're still in bounds */ - voltage = rdev->desc->ops->list_voltage(rdev, ret); - if (voltage < min_uV || voltage > max_uV) - return -EINVAL; - - return ret; -} -EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); - static int _regulator_do_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { int ret; int delay = 0; - int best_val; + int best_val = 0; unsigned int selector; int old_selector = -1; @@ -2084,7 +2299,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, * If we can't obtain the old selector there is not enough * info to call set_voltage_time_sel(). */ - if (rdev->desc->ops->set_voltage_time_sel && + if (_regulator_is_enabled(rdev) && + rdev->desc->ops->set_voltage_time_sel && rdev->desc->ops->get_voltage_sel) { old_selector = rdev->desc->ops->get_voltage_sel(rdev); if (old_selector < 0) @@ -2094,30 +2310,53 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, if (rdev->desc->ops->set_voltage) { ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, &selector); + + if (ret >= 0) { + if (rdev->desc->ops->list_voltage) + best_val = rdev->desc->ops->list_voltage(rdev, + selector); + else + best_val = _regulator_get_voltage(rdev); + } + } else if (rdev->desc->ops->set_voltage_sel) { - if (rdev->desc->ops->map_voltage) + if (rdev->desc->ops->map_voltage) { ret = rdev->desc->ops->map_voltage(rdev, min_uV, max_uV); - else - ret = regulator_map_voltage_iterate(rdev, min_uV, - max_uV); + } else { + if (rdev->desc->ops->list_voltage == + regulator_list_voltage_linear) + ret = regulator_map_voltage_linear(rdev, + min_uV, max_uV); + else if (rdev->desc->ops->list_voltage == + regulator_list_voltage_linear_range) + ret = regulator_map_voltage_linear_range(rdev, + min_uV, max_uV); + else + ret = regulator_map_voltage_iterate(rdev, + min_uV, max_uV); + } if (ret >= 0) { - selector = ret; - ret = rdev->desc->ops->set_voltage_sel(rdev, ret); + best_val = rdev->desc->ops->list_voltage(rdev, ret); + if (min_uV <= best_val && max_uV >= best_val) { + selector = ret; + if (old_selector == selector) + ret = 0; + else + ret = rdev->desc->ops->set_voltage_sel( + rdev, ret); + } else { + ret = -EINVAL; + } } } else { ret = -EINVAL; } - if (rdev->desc->ops->list_voltage) - best_val = rdev->desc->ops->list_voltage(rdev, selector); - else - best_val = -1; - /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (ret == 0 && old_selector >= 0 && - rdev->desc->ops->set_voltage_time_sel) { + if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0 + && old_selector != selector) { delay = rdev->desc->ops->set_voltage_time_sel(rdev, old_selector, selector); @@ -2126,19 +2365,22 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, delay); delay = 0; } - } - /* Insert any necessary delays */ - if (delay >= 1000) { - mdelay(delay / 1000); - udelay(delay % 1000); - } else if (delay) { - udelay(delay); + /* Insert any necessary delays */ + if (delay >= 1000) { + mdelay(delay / 1000); + udelay(delay % 1000); + } else if (delay) { + udelay(delay); + } } - if (ret == 0) + if (ret == 0 && best_val >= 0) { + unsigned long data = best_val; + _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, - NULL); + (void *)data); + } trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); @@ -2167,6 +2409,8 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) { struct regulator_dev *rdev = regulator->rdev; int ret = 0; + int old_min_uV, old_max_uV; + int current_uV; mutex_lock(&rdev->mutex); @@ -2177,6 +2421,19 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) if (regulator->min_uV == min_uV && regulator->max_uV == max_uV) goto out; + /* If we're trying to set a range that overlaps the current voltage, + * return succesfully even though the regulator does not support + * changing the voltage. + */ + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + current_uV = _regulator_get_voltage(rdev); + if (min_uV <= current_uV && current_uV <= max_uV) { + regulator->min_uV = min_uV; + regulator->max_uV = max_uV; + goto out; + } + } + /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { @@ -2188,18 +2445,29 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) ret = regulator_check_voltage(rdev, &min_uV, &max_uV); if (ret < 0) goto out; + + /* restore original values in case of error */ + old_min_uV = regulator->min_uV; + old_max_uV = regulator->max_uV; regulator->min_uV = min_uV; regulator->max_uV = max_uV; ret = regulator_check_consumers(rdev, &min_uV, &max_uV); if (ret < 0) - goto out; + goto out2; ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + if (ret < 0) + goto out2; out: mutex_unlock(&rdev->mutex); return ret; +out2: + regulator->min_uV = old_min_uV; + regulator->max_uV = old_max_uV; + mutex_unlock(&rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_voltage); @@ -2249,6 +2517,46 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** + * regulator_set_voltage_time_sel - get raise/fall time + * @rdev: regulator source device + * @old_selector: selector for starting voltage + * @new_selector: selector for target voltage + * + * Provided with the starting and target voltage selectors, this function + * returns time in microseconds required to rise or fall to this new voltage + * + * Drivers providing ramp_delay in regulation_constraints can use this as their + * set_voltage_time_sel() operation. + */ +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + unsigned int ramp_delay = 0; + int old_volt, new_volt; + + if (rdev->constraints->ramp_delay) + ramp_delay = rdev->constraints->ramp_delay; + else if (rdev->desc->ramp_delay) + ramp_delay = rdev->desc->ramp_delay; + + if (ramp_delay == 0) { + rdev_warn(rdev, "ramp_delay not set\n"); + return 0; + } + + /* sanity check */ + if (!rdev->desc->ops->list_voltage) + return -EINVAL; + + old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); + new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); + + return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); + +/** * regulator_sync_voltage - re-apply last regulator output voltage * @regulator: regulator source * @@ -2306,6 +2614,10 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) ret = rdev->desc->ops->list_voltage(rdev, sel); } else if (rdev->desc->ops->get_voltage) { ret = rdev->desc->ops->get_voltage(rdev); + } else if (rdev->desc->ops->list_voltage) { + ret = rdev->desc->ops->list_voltage(rdev, 0); + } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) { + ret = rdev->desc->fixed_uV; } else { return -EINVAL; } @@ -2341,7 +2653,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); /** * regulator_set_current_limit - set regulator output current limit * @regulator: regulator source - * @min_uA: Minimuum supported current in uA + * @min_uA: Minimum supported current in uA * @max_uA: Maximum supported current in uA * * Sets current sink to the desired output current. This can be set during @@ -2592,6 +2904,59 @@ out: EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); /** + * regulator_allow_bypass - allow the regulator to go into bypass mode + * + * @regulator: Regulator to configure + * @enable: enable or disable bypass mode + * + * Allow the regulator to go into bypass mode if all other consumers + * for the regulator also enable bypass mode and the machine + * constraints allow this. Bypass mode means that the regulator is + * simply passing the input directly to the output with no regulation. + */ +int regulator_allow_bypass(struct regulator *regulator, bool enable) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret = 0; + + if (!rdev->desc->ops->set_bypass) + return 0; + + if (rdev->constraints && + !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) + return 0; + + mutex_lock(&rdev->mutex); + + if (enable && !regulator->bypass) { + rdev->bypass_count++; + + if (rdev->bypass_count == rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count--; + } + + } else if (!enable && regulator->bypass) { + rdev->bypass_count--; + + if (rdev->bypass_count != rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count++; + } + } + + if (ret == 0) + regulator->bypass = enable; + + mutex_unlock(&rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_allow_bypass); + +/** * regulator_register_notifier - register regulator event notifier * @regulator: regulator source * @nb: notifier block @@ -2628,7 +2993,7 @@ static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data) { /* call rdev chain first */ - blocking_notifier_call_chain(&rdev->notifier, event, NULL); + blocking_notifier_call_chain(&rdev->notifier, event, data); } /** @@ -2676,52 +3041,6 @@ err: } EXPORT_SYMBOL_GPL(regulator_bulk_get); -/** - * devm_regulator_bulk_get - managed get multiple regulator consumers - * - * @dev: Device to supply - * @num_consumers: Number of consumers to register - * @consumers: Configuration of consumers; clients are stored here. - * - * @return 0 on success, an errno on failure. - * - * This helper function allows drivers to get several regulator - * consumers in one operation with management, the regulators will - * automatically be freed when the device is unbound. If any of the - * regulators cannot be acquired then any regulators that were - * allocated will be freed before returning to the caller. - */ -int devm_regulator_bulk_get(struct device *dev, int num_consumers, - struct regulator_bulk_data *consumers) -{ - int i; - int ret; - - for (i = 0; i < num_consumers; i++) - consumers[i].consumer = NULL; - - for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = devm_regulator_get(dev, - consumers[i].supply); - if (IS_ERR(consumers[i].consumer)) { - ret = PTR_ERR(consumers[i].consumer); - dev_err(dev, "Failed to get supply '%s': %d\n", - consumers[i].supply, ret); - consumers[i].consumer = NULL; - goto err; - } - } - - return 0; - -err: - for (i = 0; i < num_consumers && consumers[i].consumer; i++) - devm_regulator_put(consumers[i].consumer); - - return ret; -} -EXPORT_SYMBOL_GPL(devm_regulator_bulk_get); - static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) { struct regulator_bulk_data *bulk = data; @@ -2744,7 +3063,7 @@ static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) int regulator_bulk_enable(int num_consumers, struct regulator_bulk_data *consumers) { - LIST_HEAD(async_domain); + ASYNC_DOMAIN_EXCLUSIVE(async_domain); int i; int ret = 0; @@ -2769,9 +3088,13 @@ int regulator_bulk_enable(int num_consumers, return 0; err: - pr_err("Failed to enable %s: %d\n", consumers[i].supply, ret); - while (--i >= 0) - regulator_disable(consumers[i].consumer); + for (i = 0; i < num_consumers; i++) { + if (consumers[i].ret < 0) + pr_err("Failed to enable %s: %d\n", consumers[i].supply, + consumers[i].ret); + else + regulator_disable(consumers[i].consumer); + } return ret; } @@ -2909,10 +3232,10 @@ int regulator_mode_to_status(unsigned int mode) return REGULATOR_STATUS_NORMAL; case REGULATOR_MODE_IDLE: return REGULATOR_STATUS_IDLE; - case REGULATOR_STATUS_STANDBY: + case REGULATOR_MODE_STANDBY: return REGULATOR_STATUS_STANDBY; default: - return 0; + return REGULATOR_STATUS_UNDEFINED; } } EXPORT_SYMBOL_GPL(regulator_mode_to_status); @@ -2929,7 +3252,9 @@ static int add_regulator_attributes(struct regulator_dev *rdev) /* some attributes need specific methods to be displayed */ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) { + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || + (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) { status = device_create_file(dev, &dev_attr_microvolts); if (status < 0) return status; @@ -2944,7 +3269,7 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } - if (ops->is_enabled) { + if (rdev->ena_pin || ops->is_enabled) { status = device_create_file(dev, &dev_attr_state); if (status < 0) return status; @@ -2954,6 +3279,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } + if (ops->get_bypass) { + status = device_create_file(dev, &dev_attr_bypass); + if (status < 0) + return status; + } /* some attributes are type-specific */ if (rdev->desc->type == REGULATOR_CURRENT) { @@ -3042,6 +3372,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) &rdev->use_count); debugfs_create_u32("open_count", 0444, rdev->debugfs, &rdev->open_count); + debugfs_create_u32("bypass_count", 0444, rdev->debugfs, + &rdev->bypass_count); } /** @@ -3050,7 +3382,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) * @config: runtime configuration for regulator * * Called by regulator drivers to register a regulator. - * Returns 0 on success. + * Returns a valid pointer to struct regulator_dev on success + * or an ERR_PTR() on error. */ struct regulator_dev * regulator_register(const struct regulator_desc *regulator_desc, @@ -3105,7 +3438,12 @@ regulator_register(const struct regulator_desc *regulator_desc, rdev->reg_data = config->driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; - rdev->regmap = config->regmap; + if (config->regmap) + rdev->regmap = config->regmap; + else if (dev_get_regmap(dev, NULL)) + rdev->regmap = dev_get_regmap(dev, NULL); + else if (dev->parent) + rdev->regmap = dev_get_regmap(dev->parent, NULL); INIT_LIST_HEAD(&rdev->consumer_list); INIT_LIST_HEAD(&rdev->list); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); @@ -3120,7 +3458,7 @@ regulator_register(const struct regulator_desc *regulator_desc, /* register with sysfs */ rdev->dev.class = ®ulator_class; - rdev->dev.of_node = config->of_node; + rdev->dev.of_node = of_node_get(config->of_node); rdev->dev.parent = dev; dev_set_name(&rdev->dev, "regulator.%d", atomic_inc_return(®ulator_no) - 1); @@ -3132,6 +3470,21 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); + if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { + ret = regulator_ena_gpio_request(rdev, config); + if (ret != 0) { + rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", + config->ena_gpio, ret); + goto wash; + } + + if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH) + rdev->ena_gpio_state = 1; + + if (config->ena_gpio_invert) + rdev->ena_gpio_state = !rdev->ena_gpio_state; + } + /* set regulator constraints */ if (init_data) constraints = &init_data->constraints; @@ -3155,7 +3508,14 @@ regulator_register(const struct regulator_desc *regulator_desc, r = regulator_dev_lookup(dev, supply, &ret); - if (!r) { + if (ret == -ENODEV) { + /* + * No supply was specified for this regulator and + * there will never be one. + */ + ret = 0; + goto add_dev; + } else if (!r) { dev_err(dev, "Failed to find supply %s\n", supply); ret = -EPROBE_DEFER; goto scrub; @@ -3173,6 +3533,7 @@ regulator_register(const struct regulator_desc *regulator_desc, } } +add_dev: /* add consumers devices */ if (init_data) { for (i = 0; i < init_data->num_consumer_supplies; i++) { @@ -3199,8 +3560,10 @@ unset_supplies: scrub: if (rdev->supply) - regulator_put(rdev->supply); + _regulator_put(rdev->supply); + regulator_ena_gpio_free(rdev); kfree(rdev->constraints); +wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); @@ -3224,15 +3587,20 @@ void regulator_unregister(struct regulator_dev *rdev) if (rdev == NULL) return; - if (rdev->supply) + if (rdev->supply) { + while (rdev->use_count--) + regulator_disable(rdev->supply); regulator_put(rdev->supply); + } mutex_lock(®ulator_list_mutex); debugfs_remove_recursive(rdev->debugfs); - flush_work_sync(&rdev->disable_work.work); + flush_work(&rdev->disable_work.work); WARN_ON(rdev->open_count); unset_regulator_supplies(rdev); list_del(&rdev->list); kfree(rdev->constraints); + regulator_ena_gpio_free(rdev); + of_node_put(rdev->dev.of_node); device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } @@ -3285,23 +3653,18 @@ int regulator_suspend_finish(void) mutex_lock(®ulator_list_mutex); list_for_each_entry(rdev, ®ulator_list, list) { - struct regulator_ops *ops = rdev->desc->ops; - mutex_lock(&rdev->mutex); - if ((rdev->use_count > 0 || rdev->constraints->always_on) && - ops->enable) { - error = ops->enable(rdev); + if (rdev->use_count > 0 || rdev->constraints->always_on) { + error = _regulator_do_enable(rdev); if (error) ret = error; } else { - if (!has_full_constraints) - goto unlock; - if (!ops->disable) + if (!have_full_constraints()) goto unlock; if (!_regulator_is_enabled(rdev)) goto unlock; - error = ops->disable(rdev); + error = _regulator_do_disable(rdev); if (error) ret = error; } @@ -3331,22 +3694,6 @@ void regulator_has_full_constraints(void) EXPORT_SYMBOL_GPL(regulator_has_full_constraints); /** - * regulator_use_dummy_regulator - Provide a dummy regulator when none is found - * - * Calling this function will cause the regulator API to provide a - * dummy regulator to consumers if no physical regulator is found, - * allowing most consumers to proceed as though a regulator were - * configured. This allows systems such as those with software - * controllable regulators for the CPU core only to be brought up more - * readily. - */ -void regulator_use_dummy_regulator(void) -{ - board_wants_dummy_regulator = true; -} -EXPORT_SYMBOL_GPL(regulator_use_dummy_regulator); - -/** * rdev_get_drvdata - get rdev regulator driver data * @rdev: regulator * @@ -3472,17 +3819,30 @@ static int __init regulator_init_complete(void) struct regulation_constraints *c; int enabled, ret; + /* + * Since DT doesn't provide an idiomatic mechanism for + * enabling full constraints and since it's much more natural + * with DT to provide them just assume that a DT enabled + * system has full constraints. + */ + if (of_have_populated_dt()) + has_full_constraints = true; + mutex_lock(®ulator_list_mutex); /* If we have a full configuration then disable any regulators - * which are not in use or always_on. This will become the - * default behaviour in the future. + * we have permission to change the status for and which are + * not in use or always_on. This is effectively the default + * for DT and ACPI as they have full constraints. */ list_for_each_entry(rdev, ®ulator_list, list) { ops = rdev->desc->ops; c = rdev->constraints; - if (!ops->disable || (c && c->always_on)) + if (c && c->always_on) + continue; + + if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS)) continue; mutex_lock(&rdev->mutex); @@ -3499,14 +3859,13 @@ static int __init regulator_init_complete(void) if (!enabled) goto unlock; - if (has_full_constraints) { + if (have_full_constraints()) { /* We log since this may kill the system if it * goes wrong. */ rdev_info(rdev, "disabling\n"); - ret = ops->disable(rdev); - if (ret != 0) { + ret = _regulator_do_disable(rdev); + if (ret != 0) rdev_err(rdev, "couldn't disable: %d\n", ret); - } } else { /* The intention is that in future we will * assume that full constraints are provided @@ -3524,4 +3883,4 @@ unlock: return 0; } -late_initcall(regulator_init_complete); +late_initcall_sync(regulator_init_complete); |