diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 113 |
1 files changed, 95 insertions, 18 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index dfe58096b37..789eb46090e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -28,16 +28,6 @@ config REGULATOR_DEBUG help Say yes here to enable debugging support. -config REGULATOR_DUMMY - bool "Provide a dummy regulator if regulator lookups fail" - help - If this option is enabled then when a regulator lookup fails - and the board has not specified that it has provided full - constraints the regulator core will provide an always - enabled dummy regulator, allowing consumer drivers to continue. - - A warning will be generated when this substitution is done. - config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" help @@ -80,6 +70,14 @@ config REGULATOR_88PM8607 help This driver supports 88PM8607 voltage regulator chips. +config REGULATOR_ACT8865 + tristate "Active-semi act8865 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a active-semi act8865 voltage output + regulator via I2C bus. + config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C @@ -133,6 +131,29 @@ config REGULATOR_AS3711 This driver provides support for the voltage regulators on the AS3711 PMIC +config REGULATOR_AS3722 + tristate "AMS AS3722 PMIC Regulators" + depends on MFD_AS3722 + help + This driver provides support for the voltage regulators on the + AS3722 PMIC. This will enable support for all the software + controllable DCDC/LDO regulators. + +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X @@ -251,6 +272,22 @@ config REGULATOR_LP8788 help This driver supports LP8788 voltage regulator chip. +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + +config REGULATOR_MAX14577 + tristate "Maxim 14577/77836 regulator" + depends on MFD_MAX14577 + help + This driver controls a Maxim MAX14577/77836 regulator via I2C bus. + The MAX14577 regulators include safeout LDO and charger current + regulator. The MAX77836 has two additional LDOs. + config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" depends on I2C @@ -345,7 +382,7 @@ config REGULATOR_MC13XXX_CORE config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" - depends on MFD_MC13783 + depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 @@ -371,6 +408,15 @@ config REGULATOR_PALMAS on the muxing. This is handled automatically in the driver by reading the mux info from OTP. +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON + help + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP @@ -386,12 +432,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Support regulators on Freescale PFUZE100 PMIC" + tristate "Freescale PFUZE100/PFUZE200 regulator driver" depends on I2C select REGMAP_I2C help - Say y here to support the regulators found on the Freescale PFUZE100 - PMIC. + Say y here to support the regulators found on the Freescale + PFUZE100/PFUZE200 PMIC. config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" @@ -403,13 +449,21 @@ config REGULATOR_RC5T583 through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11 voltage regulator" + tristate "Samsung S2MPS11/S2MPS14 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11 voltage output regulator - via I2C bus. S2MPS11 is comprised of high efficient Buck converters - including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. + This driver supports a Samsung S2MPS11/S2MPS14 voltage output + regulator via I2C bus. The chip is comprised of high efficient Buck + converters including Dual-Phase Buck converter, Buck-Boost converter, + various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" @@ -419,6 +473,12 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. +config REGULATOR_ST_PWM + tristate "STMicroelectronics PWM voltage regulator" + depends on ARCH_STI + help + This driver supports ST's PWM controlled voltage regulators. + config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP @@ -429,6 +489,14 @@ config REGULATOR_TI_ABB on TI SoCs may be unstable without enabling this as it provides device specific optimized bias to allow/optimize functionality. +config REGULATOR_STW481X_VMMC + bool "ST Microelectronics STW481X VMMC regulator" + depends on MFD_STW481X + default y if MFD_STW481X + help + This driver supports the internal VMMC regulator in the STw481x + PMIC chips. + config REGULATOR_TPS51632 tristate "TI TPS51632 Power Regulator" depends on I2C @@ -492,6 +560,15 @@ config REGULATOR_TPS65217 voltage regulators. It supports software based voltage control for different voltage domains +config REGULATOR_TPS65218 + tristate "TI TPS65218 Power regulators" + depends on MFD_TPS65218 && OF + help + This driver supports TPS65218 voltage regulator chips. TPS65218 + provides six step-down converters and one general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains + config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI |