diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 606 |
1 files changed, 491 insertions, 115 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e1d943619ab..789eb46090e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -20,6 +20,7 @@ menuconfig REGULATOR If unsure, say no. + if REGULATOR config REGULATOR_DEBUG @@ -27,17 +28,6 @@ config REGULATOR_DEBUG help Say yes here to enable debugging support. -config REGULATOR_DUMMY - bool "Provide a dummy regulator if regulator lookups fail" - help - If this option is enabled then when a regulator lookup fails - and the board has not specified that it has provided full - constraints then the regulator core will provide an always - enabled dummy regulator will be provided, allowing consumer - drivers to continue. - - A warning will be generated when this substitution is done. - config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" help @@ -49,11 +39,11 @@ config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and - current regulator API which provides sysfs controls for - configuring the supplies requested. This is mainly useful - for test purposes. + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. - If unsure, say no. + If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" @@ -62,15 +52,241 @@ config REGULATOR_USERSPACE_CONSUMER from user space. Userspace consumer driver provides ability to control power supplies for such devices. - If unsure, say no. + If unsure, say no. + +config REGULATOR_88PM800 + tristate "Marvell 88PM800 Power regulators" + depends on MFD_88PM800 + help + This driver supports Marvell 88PM800 voltage regulator chips. + It delivers digitally programmable output, + the voltage is programmed via I2C interface. + It's suitable to support PXA988 chips to control VCC_MAIN and + various voltages. + +config REGULATOR_88PM8607 + tristate "Marvell 88PM8607 Power regulators" + depends on MFD_88PM860X=y + help + This driver supports 88PM8607 voltage regulator chips. + +config REGULATOR_ACT8865 + tristate "Active-semi act8865 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a active-semi act8865 voltage output + regulator via I2C bus. + +config REGULATOR_AD5398 + tristate "Analog Devices AD5398/AD5821 regulators" + depends on I2C + help + This driver supports AD5398 and AD5821 current regulator chips. + If building into module, its name is ad5398.ko. + +config REGULATOR_ANATOP + tristate "Freescale i.MX on-chip ANATOP LDO regulators" + depends on MFD_SYSCON + help + Say y here to support Freescale i.MX on-chip ANATOP LDOs + regulators. It is recommended that this option be + enabled on i.MX6 platform. + +config REGULATOR_AAT2870 + tristate "AnalogicTech AAT2870 Regulators" + depends on MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + regulator driver. + +config REGULATOR_AB3100 + tristate "ST-Ericsson AB3100 Regulator functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + These regulators correspond to functionality in the + AB3100 analog baseband dealing with power regulators + for the system. + +config REGULATOR_AB8500 + bool "ST-Ericsson AB8500 Power Regulators" + depends on AB8500_CORE + help + This driver supports the regulators found on the ST-Ericsson mixed + signal AB8500 PMIC + +config REGULATOR_ARIZONA + tristate "Wolfson Arizona class devices" + depends on MFD_ARIZONA + depends on SND_SOC + help + Support for the regulators found on Wolfson Arizona class + devices. + +config REGULATOR_AS3711 + tristate "AS3711 PMIC" + depends on MFD_AS3711 + help + This driver provides support for the voltage regulators on the + AS3711 PMIC + +config REGULATOR_AS3722 + tristate "AMS AS3722 PMIC Regulators" + depends on MFD_AS3722 + help + This driver provides support for the voltage regulators on the + AS3722 PMIC. This will enable support for all the software + controllable DCDC/LDO regulators. + +config REGULATOR_AXP20X + tristate "X-POWERS AXP20X PMIC Regulators" + depends on MFD_AXP20X + help + This driver provides support for the voltage regulators on the + AXP20X PMIC. + +config REGULATOR_BCM590XX + tristate "Broadcom BCM590xx PMU Regulators" + depends on MFD_BCM590XX + help + This driver provides support for the voltage regulators on the + BCM590xx PMUs. This will enable support for the software + controllable LDO/Switching regulators. + +config REGULATOR_DA903X + tristate "Dialog Semiconductor DA9030/DA9034 regulators" + depends on PMIC_DA903X + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + +config REGULATOR_DA9052 + tristate "Dialog Semiconductor DA9052/DA9053 regulators" + depends on PMIC_DA9052 + help + This driver supports the voltage regulators of DA9052-BC and + DA9053-AA/Bx PMIC. + +config REGULATOR_DA9055 + tristate "Dialog Semiconductor DA9055 regulators" + depends on MFD_DA9055 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-regulator. + +config REGULATOR_DA9063 + tristate "Dialog Semiconductor DA9063 regulators" + depends on MFD_DA9063 + help + Say y here to support the BUCKs and LDOs regulators found on + DA9063 PMICs. + + This driver can also be built as a module. If so, the module + will be called da9063-regulator. + +config REGULATOR_DA9210 + tristate "Dialog Semiconductor DA9210 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9210. + The DA9210 is a multi-phase synchronous step down + converter 12A DC-DC Buck controlled through an I2C + interface. + +config REGULATOR_DBX500_PRCMU + bool + +config REGULATOR_DB8500_PRCMU + bool "ST-Ericsson DB8500 Voltage Domain Regulators" + depends on MFD_DB8500_PRCMU + select REGULATOR_DBX500_PRCMU + help + This driver supports the voltage domain regulators controlled by the + DB8500 PRCMU + +config REGULATOR_FAN53555 + tristate "Fairchild FAN53555 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports Fairchild FAN53555 Digitally Programmable + TinyBuck Regulator. The FAN53555 is a step-down switching voltage + regulator that delivers a digitally programmable output from an + input voltage supply of 2.5V to 5.5V. The output voltage is + programmed through an I2C interface. + +config REGULATOR_GPIO + tristate "GPIO regulator support" + depends on GPIOLIB + help + This driver provides support for regulators that can be + controlled via gpios. + It is capable of supporting current and voltage regulators + and the platform has to provide a mapping of GPIO-states + to target volts/amps. + +config REGULATOR_ISL6271A + tristate "Intersil ISL6271A Power regulator" + depends on I2C + help + This driver supports ISL6271A voltage regulator chip. + +config REGULATOR_LP3971 + tristate "National Semiconductors LP3971 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3971 PMIC -config REGULATOR_BQ24022 - tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" +config REGULATOR_LP3972 + tristate "National Semiconductors LP3972 PMIC regulator driver" + depends on I2C help - This driver controls a TI bq24022 Charger attached via - GPIOs. The provided current regulator can enable/disable - charging select between 100 mA and 500 mA charging current - limit. + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3972 PMIC + +config REGULATOR_LP872X + tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8720/LP8725 PMIC + +config REGULATOR_LP8755 + tristate "TI LP8755 High Performance PMU driver" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8755 High Performance PMU driver. This + chip contains six step-down DC/DC converters which can support + 9 mode multiphase configuration. + +config REGULATOR_LP8788 + tristate "TI LP8788 Power Regulators" + depends on MFD_LP8788 + help + This driver supports LP8788 voltage regulator chip. + +config REGULATOR_LTC3589 + tristate "LTC3589 8-output voltage regulator" + depends on I2C + select REGMAP_I2C + help + This enables support for the LTC3589, LTC3589-1, and LTC3589-2 + 8-output regulators controlled via I2C. + +config REGULATOR_MAX14577 + tristate "Maxim 14577/77836 regulator" + depends on MFD_MAX14577 + help + This driver controls a Maxim MAX14577/77836 regulator via I2C bus. + The MAX14577 regulators include safeout LDO and charger current + regulator. The MAX77836 has two additional LDOs. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" @@ -83,6 +299,7 @@ config REGULATOR_MAX1586 config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C + select REGMAP_I2C help This driver controls a Maxim 8649 voltage output regulator via I2C bus. @@ -94,6 +311,14 @@ config REGULATOR_MAX8660 This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. +config REGULATOR_MAX8907 + tristate "Maxim 8907 voltage regulator" + depends on MFD_MAX8907 + help + This driver controls a Maxim 8907 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. + config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 @@ -108,6 +333,25 @@ config REGULATOR_MAX8952 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. +config REGULATOR_MAX8973 + tristate "Maxim MAX8973 voltage regulator " + depends on I2C + select REGMAP_I2C + help + The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down + switching regulator delievers up to 9A of output current. Each + phase operates at a 2MHz fixed frequency with a 120 deg shift + from the adjacent phase, allowing the use of small magnetic component. + +config REGULATOR_MAX8997 + tristate "Maxim 8997/8966 regulator" + depends on MFD_MAX8997 + help + This driver controls a Maxim 8997/8966 regulator + via I2C bus. The provided regulator is suitable for S5PC110, + S5PV210, and Exynos-4 chips to control VCC_CORE and + VCC_USIM voltages. + config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 @@ -116,107 +360,177 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. -config REGULATOR_TWL4030 - bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" - depends on TWL4030_CORE +config REGULATOR_MAX77686 + tristate "Maxim 77686 regulator" + depends on MFD_MAX77686 help - This driver supports the voltage regulators provided by - this family of companion chips. + This driver controls a Maxim 77686 regulator + via I2C bus. The provided regulator is suitable for + Exynos-4 chips to control VARM and VINT voltages. -config REGULATOR_WM831X - tristate "Wolfson Microelcronics WM831x PMIC regulators" - depends on MFD_WM831X +config REGULATOR_MAX77693 + tristate "Maxim MAX77693 regulator" + depends on MFD_MAX77693 help - Support the voltage and current regulators of the WM831x series - of PMIC devices. + This driver controls a Maxim 77693 regulator via I2C bus. + The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' + and one current regulator 'CHARGER'. This is suitable for + Exynos-4x12 chips. -config REGULATOR_WM8350 - tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" - depends on MFD_WM8350 +config REGULATOR_MC13XXX_CORE + tristate + +config REGULATOR_MC13783 + tristate "Freescale MC13783 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE help - This driver provides support for the voltage and current regulators - of the WM8350 AudioPlus PMIC. + Say y here to support the regulators found on the Freescale MC13783 + PMIC. -config REGULATOR_WM8400 - tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" - depends on MFD_WM8400 +config REGULATOR_MC13892 + tristate "Freescale MC13892 regulator driver" + depends on MFD_MC13XXX + select REGULATOR_MC13XXX_CORE help - This driver provides support for the voltage regulators of the - WM8400 AudioPlus PMIC. + Say y here to support the regulators found on the Freescale MC13892 + PMIC. -config REGULATOR_WM8994 - tristate "Wolfson Microelectronics WM8994 CODEC" - depends on MFD_WM8994 +config REGULATOR_PALMAS + tristate "TI Palmas PMIC Regulators" + depends on MFD_PALMAS help - This driver provides support for the voltage regulators on the - WM8994 CODEC. + If you wish to control the regulators on the Palmas series of + chips say Y here. This will enable support for all the software + controllable SMPS/LDO regulators. -config REGULATOR_DA903X - tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" - depends on PMIC_DA903X + The regulators available on Palmas series chips vary depending + on the muxing. This is handled automatically in the driver by + reading the mux info from OTP. + +config REGULATOR_PBIAS + tristate "PBIAS OMAP regulator driver" + depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON help - Say y here to support the BUCKs and LDOs regulators found on - Dialog Semiconductor DA9030/DA9034 PMIC. + Say y here to support pbias regulator for mmc1:SD card i/o + on OMAP SoCs. + This driver provides support for OMAP pbias modelled + regulators. + +config REGULATOR_PCAP + tristate "Motorola PCAP2 regulator driver" + depends on EZX_PCAP + help + This driver provides support for the voltage regulators of the + PCAP2 PMIC. config REGULATOR_PCF50633 - tristate "PCF50633 regulator driver" - depends on MFD_PCF50633 + tristate "NXP PCF50633 regulator driver" + depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 -config REGULATOR_LP3971 - tristate "National Semiconductors LP3971 PMIC regulator driver" +config REGULATOR_PFUZE100 + tristate "Freescale PFUZE100/PFUZE200 regulator driver" depends on I2C + select REGMAP_I2C help - Say Y here to support the voltage regulators and convertors - on National Semiconductors LP3971 PMIC + Say y here to support the regulators found on the Freescale + PFUZE100/PFUZE200 PMIC. -config REGULATOR_LP3972 - tristate "National Semiconductors LP3972 PMIC regulator driver" - depends on I2C +config REGULATOR_RC5T583 + tristate "RICOH RC5T583 Power regulators" + depends on MFD_RC5T583 help - Say Y here to support the voltage regulators and convertors - on National Semiconductors LP3972 PMIC + Select this option to enable the power regulator of RICOH + PMIC RC5T583. + This driver supports the control of different power rails of device + through regulator interface. The device supports multiple DCDC/LDO + outputs which can be controlled by i2c communication. -config REGULATOR_PCAP - tristate "PCAP2 regulator driver" - depends on EZX_PCAP +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE help - This driver provides support for the voltage regulators of the - PCAP2 PMIC. + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. -config REGULATOR_MC13XXX_CORE - tristate +config REGULATOR_S2MPS11 + tristate "Samsung S2MPS11/S2MPS14 voltage regulator" + depends on MFD_SEC_CORE + help + This driver supports a Samsung S2MPS11/S2MPS14 voltage output + regulator via I2C bus. The chip is comprised of high efficient Buck + converters including Dual-Phase Buck converter, Buck-Boost converter, + various LDOs. -config REGULATOR_MC13783 - tristate "Support regulators on Freescale MC13783 PMIC" - depends on MFD_MC13783 - select REGULATOR_MC13XXX_CORE +config REGULATOR_S5M8767 + tristate "Samsung S5M8767A voltage regulator" + depends on MFD_SEC_CORE help - Say y here to support the regulators found on the Freescale MC13783 - PMIC. + This driver supports a Samsung S5M8767A voltage output regulator + via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and + supports DVS mode with 8bits of output voltage control. -config REGULATOR_MC13892 - tristate "Support regulators on Freescale MC13892 PMIC" - depends on MFD_MC13XXX - select REGULATOR_MC13XXX_CORE +config REGULATOR_ST_PWM + tristate "STMicroelectronics PWM voltage regulator" + depends on ARCH_STI help - Say y here to support the regulators found on the Freescale MC13892 - PMIC. + This driver supports ST's PWM controlled voltage regulators. -config REGULATOR_AB3100 - tristate "ST-Ericsson AB3100 Regulator functions" - depends on AB3100_CORE - default y if AB3100_CORE +config REGULATOR_TI_ABB + tristate "TI Adaptive Body Bias on-chip LDO" + depends on ARCH_OMAP help - These regulators correspond to functionality in the - AB3100 analog baseband dealing with power regulators - for the system. + Select this option to support Texas Instruments' on-chip Adaptive Body + Bias (ABB) LDO regulators. It is recommended that this option be + enabled on required TI SoC. Certain Operating Performance Points + on TI SoCs may be unstable without enabling this as it provides + device specific optimized bias to allow/optimize functionality. + +config REGULATOR_STW481X_VMMC + bool "ST Microelectronics STW481X VMMC regulator" + depends on MFD_STW481X + default y if MFD_STW481X + help + This driver supports the internal VMMC regulator in the STw481x + PMIC chips. + +config REGULATOR_TPS51632 + tristate "TI TPS51632 Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS51632 voltage regulator chip. + The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller + with Serial VID control and DVFS. + The voltage output can be configure through I2C interface or PWM + interface. + +config REGULATOR_TPS6105X + tristate "TI TPS6105X Power regulators" + depends on TPS6105X + default y if TPS6105X + help + This driver supports TPS61050/TPS61052 voltage regulator chips. + It is a single boost converter primarily for white LEDs and + audio amplifiers. + +config REGULATOR_TPS62360 + tristate "TI TPS6236x Power Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports TPS6236x voltage regulator chip. This + regulator is meant for processor core supply. This chip is + high-frequency synchronous step down dc-dc converter optimized + for battery-powered portable applications. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C + select REGMAP_I2C help This driver supports TPS65023 voltage regulator chips. TPS65023 provides three step-down converters and two general-purpose LDO voltage regulators. @@ -230,37 +544,30 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. -config REGULATOR_88PM8607 - bool "Marvell 88PM8607 Power regulators" - depends on MFD_88PM860X=y +config REGULATOR_TPS65090 + tristate "TI TPS65090 Power regulator" + depends on MFD_TPS65090 help - This driver supports 88PM8607 voltage regulator chips. - -config REGULATOR_ISL6271A - tristate "Intersil ISL6271A Power regulator" - depends on I2C - help - This driver supports ISL6271A voltage regulator chip. + This driver provides support for the voltage regulators on the + TI TPS65090 PMIC. -config REGULATOR_AD5398 - tristate "Analog Devices AD5398/AD5821 regulators" - depends on I2C +config REGULATOR_TPS65217 + tristate "TI TPS65217 Power regulators" + depends on MFD_TPS65217 help - This driver supports AD5398 and AD5821 current regulator chips. - If building into module, its name is ad5398.ko. + This driver supports TPS65217 voltage regulator chips. TPS65217 + provides three step-down converters and four general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains -config REGULATOR_AB8500 - bool "ST-Ericsson AB8500 Power Regulators" - depends on AB8500_CORE +config REGULATOR_TPS65218 + tristate "TI TPS65218 Power regulators" + depends on MFD_TPS65218 && OF help - This driver supports the regulators found on the ST-Ericsson mixed - signal AB8500 PMIC - -config REGULATOR_TPS6586X - tristate "TI TPS6586X Power regulators" - depends on MFD_TPS6586X - help - This driver supports TPS6586X voltage regulator chips. + This driver supports TPS65218 voltage regulator chips. TPS65218 + provides six step-down converters and one general-purpose LDO + voltage regulators. It supports software based voltage control + for different voltage domains config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" @@ -272,5 +579,74 @@ config REGULATOR_TPS6524X serial interface currently supported on the sequencer serial port controller. +config REGULATOR_TPS6586X + tristate "TI TPS6586X Power regulators" + depends on MFD_TPS6586X + help + This driver supports TPS6586X voltage regulator chips. + +config REGULATOR_TPS65910 + tristate "TI TPS65910/TPS65911 Power Regulators" + depends on MFD_TPS65910 + help + This driver supports TPS65910/TPS65911 voltage regulator chips. + +config REGULATOR_TPS65912 + tristate "TI TPS65912 Power regulator" + depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) + help + This driver supports TPS65912 voltage regulator chip. + +config REGULATOR_TPS80031 + tristate "TI TPS80031/TPS80032 power regualtor driver" + depends on MFD_TPS80031 + help + TPS80031/ TPS80032 Fully Integrated Power Management with Power + Path and Battery Charger. It has 5 configurable step-down + converters, 11 general purpose LDOs, VBUS generator and digital + output to control regulators. + +config REGULATOR_TWL4030 + tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" + depends on TWL4030_CORE + help + This driver supports the voltage regulators provided by + this family of companion chips. + +config REGULATOR_VEXPRESS + tristate "Versatile Express regulators" + depends on VEXPRESS_CONFIG + help + This driver provides support for voltage regulators available + on the ARM Ltd's Versatile Express platform. + +config REGULATOR_WM831X + tristate "Wolfson Microelectronics WM831x PMIC regulators" + depends on MFD_WM831X + help + Support the voltage and current regulators of the WM831x series + of PMIC devices. + +config REGULATOR_WM8350 + tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" + depends on MFD_WM8350 + help + This driver provides support for the voltage and current regulators + of the WM8350 AudioPlus PMIC. + +config REGULATOR_WM8400 + tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" + depends on MFD_WM8400 + help + This driver provides support for the voltage regulators of the + WM8400 AudioPlus PMIC. + +config REGULATOR_WM8994 + tristate "Wolfson Microelectronics WM8994 CODEC" + depends on MFD_WM8994 + help + This driver provides support for the voltage regulators on the + WM8994 CODEC. + endif |