diff options
Diffstat (limited to 'drivers/rapidio')
| -rw-r--r-- | drivers/rapidio/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/rapidio/Makefile | 5 | ||||
| -rw-r--r-- | drivers/rapidio/devices/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/rapidio/devices/Makefile | 7 | ||||
| -rw-r--r-- | drivers/rapidio/devices/tsi721.c | 37 | ||||
| -rw-r--r-- | drivers/rapidio/devices/tsi721.h | 7 | ||||
| -rw-r--r-- | drivers/rapidio/devices/tsi721_dma.c | 148 | ||||
| -rw-r--r-- | drivers/rapidio/rio-driver.c | 48 | ||||
| -rw-r--r-- | drivers/rapidio/rio-scan.c | 376 | ||||
| -rw-r--r-- | drivers/rapidio/rio-sysfs.c | 130 | ||||
| -rw-r--r-- | drivers/rapidio/rio.c | 621 | ||||
| -rw-r--r-- | drivers/rapidio/rio.h | 56 | ||||
| -rw-r--r-- | drivers/rapidio/switches/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/rapidio/switches/Makefile | 1 | ||||
| -rw-r--r-- | drivers/rapidio/switches/idt_gen2.c | 100 | ||||
| -rw-r--r-- | drivers/rapidio/switches/idtcps.c | 86 | ||||
| -rw-r--r-- | drivers/rapidio/switches/tsi500.c | 78 | ||||
| -rw-r--r-- | drivers/rapidio/switches/tsi568.c | 71 | ||||
| -rw-r--r-- | drivers/rapidio/switches/tsi57x.c | 81 |
19 files changed, 1288 insertions, 610 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35ebb9..3e3be57e9a1 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,29 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + +menu "RapidIO Switch drivers" + depends on RAPIDIO + source "drivers/rapidio/switches/Kconfig" + +endmenu diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb812100..6271ada6993 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,10 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO) += rapidio.o +rapidio-y := rio.o rio-access.o rio-driver.o rio-sysfs.o + +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig index 12a9d7f7040..c4cb0877592 100644 --- a/drivers/rapidio/devices/Kconfig +++ b/drivers/rapidio/devices/Kconfig @@ -3,7 +3,7 @@ # config RAPIDIO_TSI721 - bool "IDT Tsi721 PCI Express SRIO Controller support" + tristate "IDT Tsi721 PCI Express SRIO Controller support" depends on RAPIDIO && PCIEPORTBUS default "n" ---help--- diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile index 7b62860f34f..9432c494cf5 100644 --- a/drivers/rapidio/devices/Makefile +++ b/drivers/rapidio/devices/Makefile @@ -2,7 +2,6 @@ # Makefile for RapidIO devices # -obj-$(CONFIG_RAPIDIO_TSI721) += tsi721.o -ifeq ($(CONFIG_RAPIDIO_DMA_ENGINE),y) -obj-$(CONFIG_RAPIDIO_TSI721) += tsi721_dma.o -endif +obj-$(CONFIG_RAPIDIO_TSI721) += tsi721_mport.o +tsi721_mport-y := tsi721.o +tsi721_mport-$(CONFIG_RAPIDIO_DMA_ENGINE) += tsi721_dma.o diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 38ecd8f4d60..2ca1a0b3ad5 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) u32 intval; u32 ch_inte; + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + dev_int = ioread32(priv->regs + TSI721_DEV_INT); if (!dev_int) return IRQ_NONE; @@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) } } #endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + return IRQ_HANDLED; } @@ -756,15 +768,10 @@ static int tsi721_enable_msix(struct tsi721_device *priv) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ - err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries)); + err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries)); if (err) { - if (err > 0) - dev_info(&priv->pdev->dev, - "Only %d MSI-X vectors available, " - "not using MSI-X\n", err); - else - dev_err(&priv->pdev->dev, - "Failed to enable MSI-X (err=%d)\n", err); + dev_err(&priv->pdev->dev, + "Failed to enable MSI-X (err=%d)\n", err); return err; } @@ -2202,7 +2209,7 @@ static void tsi721_disable_ints(struct tsi721_device *priv) * * Configures Tsi721 as RapidIO master port. */ -static int __devinit tsi721_setup_mport(struct tsi721_device *priv) +static int tsi721_setup_mport(struct tsi721_device *priv) { struct pci_dev *pdev = priv->pdev; int err = 0; @@ -2244,6 +2251,7 @@ static int __devinit tsi721_setup_mport(struct tsi721_device *priv) mport->phy_type = RIO_PHY_SERIAL; mport->priv = (void *)priv; mport->phys_efptr = 0x100; + mport->dev.parent = &pdev->dev; priv->mport = mport; INIT_LIST_HEAD(&mport->dbells); @@ -2302,7 +2310,7 @@ err_exit: return err; } -static int __devinit tsi721_probe(struct pci_dev *pdev, +static int tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; @@ -2503,9 +2511,8 @@ static int __init tsi721_init(void) return pci_register_driver(&tsi721_driver); } -static void __exit tsi721_exit(void) -{ - pci_unregister_driver(&tsi721_driver); -} - device_initcall(tsi721_init); + +MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h index 7d5b13ba8d4..0305675270e 100644 --- a/drivers/rapidio/devices/tsi721.h +++ b/drivers/rapidio/devices/tsi721.h @@ -644,6 +644,9 @@ enum tsi721_smsg_int_flag { #ifdef CONFIG_RAPIDIO_DMA_ENGINE +#define TSI721_BDMA_BD_RING_SZ 128 +#define TSI721_BDMA_MAX_BCOUNT (TSI721_DMAD_BCOUNT1 + 1) + struct tsi721_tx_desc { struct dma_async_tx_descriptor txd; struct tsi721_dma_desc *hw_desc; @@ -652,6 +655,7 @@ struct tsi721_tx_desc { u64 rio_addr; /* upper 2-bits of 66-bit RIO address */ u8 rio_addr_u; + u32 bcount; bool interrupt; struct list_head desc_node; struct list_head tx_list; @@ -678,6 +682,7 @@ struct tsi721_bdma_chan { struct list_head free_list; dma_cookie_t completed_cookie; struct tasklet_struct tasklet; + bool active; }; #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ @@ -846,7 +851,7 @@ struct tsi721_device { #ifdef CONFIG_RAPIDIO_DMA_ENGINE extern void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan); -extern int __devinit tsi721_register_dma(struct tsi721_device *priv); +extern int tsi721_register_dma(struct tsi721_device *priv); #endif #endif diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c index 92e06a5c62e..44341dc5b14 100644 --- a/drivers/rapidio/devices/tsi721_dma.c +++ b/drivers/rapidio/devices/tsi721_dma.c @@ -206,8 +206,8 @@ void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan) { /* Disable BDMA channel interrupts */ iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE); - - tasklet_schedule(&bdma_chan->tasklet); + if (bdma_chan->active) + tasklet_schedule(&bdma_chan->tasklet); } #ifdef CONFIG_PCI_MSI @@ -287,6 +287,12 @@ struct tsi721_tx_desc *tsi721_desc_get(struct tsi721_bdma_chan *bdma_chan) "desc %p not ACKed\n", tx_desc); } + if (ret == NULL) { + dev_dbg(bdma_chan->dchan.device->dev, + "%s: unable to obtain tx descriptor\n", __func__); + goto err_out; + } + i = bdma_chan->wr_count_next % bdma_chan->bd_num; if (i == bdma_chan->bd_num - 1) { i = 0; @@ -297,42 +303,24 @@ struct tsi721_tx_desc *tsi721_desc_get(struct tsi721_bdma_chan *bdma_chan) tx_desc->txd.phys = bdma_chan->bd_phys + i * sizeof(struct tsi721_dma_desc); tx_desc->hw_desc = &((struct tsi721_dma_desc *)bdma_chan->bd_base)[i]; - +err_out: spin_unlock_bh(&bdma_chan->lock); return ret; } static int -tsi721_fill_desc(struct tsi721_bdma_chan *bdma_chan, - struct tsi721_tx_desc *desc, struct scatterlist *sg, +tsi721_desc_fill_init(struct tsi721_tx_desc *desc, struct scatterlist *sg, enum dma_rtype rtype, u32 sys_size) { struct tsi721_dma_desc *bd_ptr = desc->hw_desc; u64 rio_addr; - if (sg_dma_len(sg) > TSI721_DMAD_BCOUNT1 + 1) { - dev_err(bdma_chan->dchan.device->dev, - "SG element is too large\n"); - return -EINVAL; - } - - dev_dbg(bdma_chan->dchan.device->dev, - "desc: 0x%llx, addr: 0x%llx len: 0x%x\n", - (u64)desc->txd.phys, (unsigned long long)sg_dma_address(sg), - sg_dma_len(sg)); - - dev_dbg(bdma_chan->dchan.device->dev, - "bd_ptr = %p did=%d raddr=0x%llx\n", - bd_ptr, desc->destid, desc->rio_addr); - /* Initialize DMA descriptor */ bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) | (rtype << 19) | desc->destid); - if (desc->interrupt) - bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF); bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) | - (sys_size << 26) | sg_dma_len(sg)); + (sys_size << 26)); rio_addr = (desc->rio_addr >> 2) | ((u64)(desc->rio_addr_u & 0x3) << 62); bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff); @@ -346,6 +334,20 @@ tsi721_fill_desc(struct tsi721_bdma_chan *bdma_chan, return 0; } +static int +tsi721_desc_fill_end(struct tsi721_tx_desc *desc) +{ + struct tsi721_dma_desc *bd_ptr = desc->hw_desc; + + /* Update DMA descriptor */ + if (desc->interrupt) + bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF); + bd_ptr->bcount |= cpu_to_le32(desc->bcount & TSI721_DMAD_BCOUNT1); + + return 0; +} + + static void tsi721_dma_chain_complete(struct tsi721_bdma_chan *bdma_chan, struct tsi721_tx_desc *desc) { @@ -562,7 +564,7 @@ static int tsi721_alloc_chan_resources(struct dma_chan *dchan) } #endif /* CONFIG_PCI_MSI */ - tasklet_enable(&bdma_chan->tasklet); + bdma_chan->active = true; tsi721_bdma_interrupt_enable(bdma_chan, 1); return bdma_chan->bd_num - 1; @@ -576,9 +578,7 @@ err_out: static void tsi721_free_chan_resources(struct dma_chan *dchan) { struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan); -#ifdef CONFIG_PCI_MSI struct tsi721_device *priv = to_tsi721(dchan->device); -#endif LIST_HEAD(list); dev_dbg(dchan->device->dev, "%s: Entry\n", __func__); @@ -589,14 +589,25 @@ static void tsi721_free_chan_resources(struct dma_chan *dchan) BUG_ON(!list_empty(&bdma_chan->active_list)); BUG_ON(!list_empty(&bdma_chan->queue)); - tasklet_disable(&bdma_chan->tasklet); + tsi721_bdma_interrupt_enable(bdma_chan, 0); + bdma_chan->active = false; + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) { + synchronize_irq(priv->msix[TSI721_VECT_DMA0_DONE + + bdma_chan->id].vector); + synchronize_irq(priv->msix[TSI721_VECT_DMA0_INT + + bdma_chan->id].vector); + } else +#endif + synchronize_irq(priv->pdev->irq); + + tasklet_kill(&bdma_chan->tasklet); spin_lock_bh(&bdma_chan->lock); list_splice_init(&bdma_chan->free_list, &list); spin_unlock_bh(&bdma_chan->lock); - tsi721_bdma_interrupt_enable(bdma_chan, 0); - #ifdef CONFIG_PCI_MSI if (priv->flags & TSI721_USING_MSIX) { free_irq(priv->msix[TSI721_VECT_DMA0_DONE + @@ -665,6 +676,7 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan, unsigned int i; u32 sys_size = dma_to_mport(dchan->device)->sys_size; enum dma_rtype rtype; + dma_addr_t next_addr = -1; if (!sgl || !sg_len) { dev_err(dchan->device->dev, "%s: No SG list\n", __func__); @@ -695,36 +707,84 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan, for_each_sg(sgl, sg, sg_len, i) { int err; - dev_dbg(dchan->device->dev, "%s: sg #%d\n", __func__, i); + if (sg_dma_len(sg) > TSI721_BDMA_MAX_BCOUNT) { + dev_err(dchan->device->dev, + "%s: SG entry %d is too large\n", __func__, i); + goto err_desc_put; + } + + /* + * If this sg entry forms contiguous block with previous one, + * try to merge it into existing DMA descriptor + */ + if (desc) { + if (next_addr == sg_dma_address(sg) && + desc->bcount + sg_dma_len(sg) <= + TSI721_BDMA_MAX_BCOUNT) { + /* Adjust byte count of the descriptor */ + desc->bcount += sg_dma_len(sg); + goto entry_done; + } + + /* + * Finalize this descriptor using total + * byte count value. + */ + tsi721_desc_fill_end(desc); + dev_dbg(dchan->device->dev, "%s: desc final len: %d\n", + __func__, desc->bcount); + } + + /* + * Obtain and initialize a new descriptor + */ desc = tsi721_desc_get(bdma_chan); if (!desc) { dev_err(dchan->device->dev, - "Not enough descriptors available\n"); - goto err_desc_get; + "%s: Failed to get new descriptor for SG %d\n", + __func__, i); + goto err_desc_put; } - if (sg_is_last(sg)) - desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0; - else - desc->interrupt = false; - desc->destid = rext->destid; desc->rio_addr = rio_addr; desc->rio_addr_u = 0; + desc->bcount = sg_dma_len(sg); - err = tsi721_fill_desc(bdma_chan, desc, sg, rtype, sys_size); + dev_dbg(dchan->device->dev, + "sg%d desc: 0x%llx, addr: 0x%llx len: %d\n", + i, (u64)desc->txd.phys, + (unsigned long long)sg_dma_address(sg), + sg_dma_len(sg)); + + dev_dbg(dchan->device->dev, + "bd_ptr = %p did=%d raddr=0x%llx\n", + desc->hw_desc, desc->destid, desc->rio_addr); + + err = tsi721_desc_fill_init(desc, sg, rtype, sys_size); if (err) { dev_err(dchan->device->dev, "Failed to build desc: %d\n", err); - goto err_desc_get; + goto err_desc_put; } - rio_addr += sg_dma_len(sg); + next_addr = sg_dma_address(sg); if (!first) first = desc; else list_add_tail(&desc->desc_node, &first->tx_list); + +entry_done: + if (sg_is_last(sg)) { + desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0; + tsi721_desc_fill_end(desc); + dev_dbg(dchan->device->dev, "%s: desc final len: %d\n", + __func__, desc->bcount); + } else { + rio_addr += sg_dma_len(sg); + next_addr += sg_dma_len(sg); + } } first->txd.cookie = -EBUSY; @@ -732,7 +792,7 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan, return &first->txd; -err_desc_get: +err_desc_put: tsi721_desc_put(bdma_chan, first); return NULL; } @@ -765,7 +825,7 @@ static int tsi721_device_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd, return 0; } -int __devinit tsi721_register_dma(struct tsi721_device *priv) +int tsi721_register_dma(struct tsi721_device *priv) { int i; int nr_channels = TSI721_DMA_MAXCH; @@ -783,13 +843,14 @@ int __devinit tsi721_register_dma(struct tsi721_device *priv) if (i == TSI721_DMACH_MAINT) continue; - bdma_chan->bd_num = 64; + bdma_chan->bd_num = TSI721_BDMA_BD_RING_SZ; bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i); bdma_chan->dchan.device = &mport->dma; bdma_chan->dchan.cookie = 1; bdma_chan->dchan.chan_id = i; bdma_chan->id = i; + bdma_chan->active = false; spin_lock_init(&bdma_chan->lock); @@ -799,7 +860,6 @@ int __devinit tsi721_register_dma(struct tsi721_device *priv) tasklet_init(&bdma_chan->tasklet, tsi721_dma_tasklet, (unsigned long)bdma_chan); - tasklet_disable(&bdma_chan->tasklet); list_add_tail(&bdma_chan->dchan.device_node, &mport->dma.channels); } diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53bdaa3..f301f059bb8 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,12 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against @@ -192,29 +198,57 @@ static int rio_match_bus(struct device *dev, struct device_driver *drv) out:return 0; } -struct device rio_bus = { - .init_name = "rapidio", +static int rio_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct rio_dev *rdev; + + if (!dev) + return -ENODEV; + + rdev = to_rio_dev(dev); + if (!rdev) + return -ENODEV; + + if (add_uevent_var(env, "MODALIAS=rapidio:v%04Xd%04Xav%04Xad%04X", + rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did)) + return -ENOMEM; + return 0; +} + +struct class rio_mport_class = { + .name = "rapidio_port", + .owner = THIS_MODULE, + .dev_groups = rio_mport_groups, }; +EXPORT_SYMBOL_GPL(rio_mport_class); struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, - .dev_attrs = rio_dev_attrs, + .dev_groups = rio_dev_groups, + .bus_groups = rio_bus_groups, .probe = rio_device_probe, .remove = rio_device_remove, + .uevent = rio_uevent, }; /** * rio_bus_init - Register the RapidIO bus with the device model * - * Registers the RIO bus device and RIO bus type with the Linux + * Registers the RIO mport device class and RIO bus type with the Linux * device model. */ static int __init rio_bus_init(void) { - if (device_register(&rio_bus) < 0) - printk("RIO: failed to register RIO bus device\n"); - return bus_register(&rio_bus_type); + int ret; + + ret = class_register(&rio_mport_class); + if (!ret) { + ret = bus_register(&rio_bus_type); + if (ret) + class_unregister(&rio_mport_class); + } + return ret; } postcore_initcall(rio_bus_init); diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 07da58bb495..47a1b2ea76c 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev) } /** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int __devinit rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - -/** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network * @port: Master port to send transactions @@ -463,7 +338,7 @@ inline int rio_enable_rx_tx_port(struct rio_mport *port, * to a RIO device on success or NULL on failure. * */ -static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, +static struct rio_dev *rio_setup_device(struct rio_net *net, struct rio_mport *port, u16 destid, u8 hopcount, int do_enum) { @@ -531,6 +406,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, rio_mport_write_config_32(port, destid, hopcount, RIO_COMPONENT_TAG_CSR, next_comptag); rdev->comp_tag = next_comptag++; + rdev->do_enum = true; } else { rio_mport_read_config_32(port, destid, hopcount, RIO_COMPONENT_TAG_CSR, @@ -557,8 +433,8 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, /* If a PE has both switch and other functions, show it as a switch */ if (rio_is_switch(rdev)) { rswitch = rdev->rswitch; - rswitch->switchid = rdev->comp_tag & RIO_CTAG_UDEVID; rswitch->port_ok = 0; + spin_lock_init(&rswitch->lock); rswitch->route_table = kzalloc(sizeof(u8)* RIO_MAX_ROUTE_ENTRIES(port->sys_size), GFP_KERNEL); @@ -569,12 +445,10 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, rdid++) rswitch->route_table[rdid] = RIO_INVALID_ROUTE; dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id, - rswitch->switchid); - rio_switch_init(rdev, do_enum); + rdev->comp_tag & RIO_CTAG_UDEVID); - if (do_enum && rswitch->clr_table) - rswitch->clr_table(port, destid, hopcount, - RIO_GLOBAL_TABLE); + if (do_enum) + rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0); list_add_tail(&rswitch->node, &net->switches); @@ -584,11 +458,11 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, rio_enable_rx_tx_port(port, 0, destid, hopcount, 0); dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id, - rdev->destid); + rdev->comp_tag & RIO_CTAG_UDEVID); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rdev->dev.parent = &port->dev; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -659,156 +533,6 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport) } /** - * rio_lock_device - Acquires host device lock for specified device - * @port: Master port to send transaction - * @destid: Destination ID for device/switch - * @hopcount: Hopcount to reach switch - * @wait_ms: Max wait time in msec (0 = no timeout) - * - * Attepts to acquire host device lock for specified device - * Returns 0 if device lock acquired or EINVAL if timeout expires. - */ -static int -rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms) -{ - u32 result; - int tcnt = 0; - - /* Attempt to acquire device lock */ - rio_mport_write_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, port->host_deviceid); - rio_mport_read_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - - while (result != port->host_deviceid) { - if (wait_ms != 0 && tcnt == wait_ms) { - pr_debug("RIO: timeout when locking device %x:%x\n", - destid, hopcount); - return -EINVAL; - } - - /* Delay a bit */ - mdelay(1); - tcnt++; - /* Try to acquire device lock again */ - rio_mport_write_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, - port->host_deviceid); - rio_mport_read_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - } - - return 0; -} - -/** - * rio_unlock_device - Releases host device lock for specified device - * @port: Master port to send transaction - * @destid: Destination ID for device/switch - * @hopcount: Hopcount to reach switch - * - * Returns 0 if device lock released or EINVAL if fails. - */ -static int -rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount) -{ - u32 result; - - /* Release device lock */ - rio_mport_write_config_32(port, destid, - hopcount, - RIO_HOST_DID_LOCK_CSR, - port->host_deviceid); - rio_mport_read_config_32(port, destid, hopcount, - RIO_HOST_DID_LOCK_CSR, &result); - if ((result & 0xffff) != 0xffff) { - pr_debug("RIO: badness when releasing device lock %x:%x\n", - destid, hopcount); - return -EINVAL; - } - - return 0; -} - -/** - * rio_route_add_entry- Add a route entry to a switch routing table - * @rdev: RIO device - * @table: Routing table ID - * @route_destid: Destination ID to be routed - * @route_port: Port number to be routed - * @lock: lock switch device flag - * - * Calls the switch specific add_entry() method to add a route entry - * on a switch. The route table can be specified using the @table - * argument if a switch has per port routing tables or the normal - * use is to specific all tables (or the global table) by passing - * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL - * on failure. - */ -static int -rio_route_add_entry(struct rio_dev *rdev, - u16 table, u16 route_destid, u8 route_port, int lock) -{ - int rc; - - if (lock) { - rc = rio_lock_device(rdev->net->hport, rdev->destid, - rdev->hopcount, 1000); - if (rc) - return rc; - } - - rc = rdev->rswitch->add_entry(rdev->net->hport, rdev->destid, - rdev->hopcount, table, - route_destid, route_port); - if (lock) - rio_unlock_device(rdev->net->hport, rdev->destid, - rdev->hopcount); - - return rc; -} - -/** - * rio_route_get_entry- Read a route entry in a switch routing table - * @rdev: RIO device - * @table: Routing table ID - * @route_destid: Destination ID to be routed - * @route_port: Pointer to read port number into - * @lock: lock switch device flag - * - * Calls the switch specific get_entry() method to read a route entry - * in a switch. The route table can be specified using the @table - * argument if a switch has per port routing tables or the normal - * use is to specific all tables (or the global table) by passing - * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL - * on failure. - */ -static int -rio_route_get_entry(struct rio_dev *rdev, u16 table, - u16 route_destid, u8 *route_port, int lock) -{ - int rc; - - if (lock) { - rc = rio_lock_device(rdev->net->hport, rdev->destid, - rdev->hopcount, 1000); - if (rc) - return rc; - } - - rc = rdev->rswitch->get_entry(rdev->net->hport, rdev->destid, - rdev->hopcount, table, - route_destid, route_port); - if (lock) - rio_unlock_device(rdev->net->hport, rdev->destid, - rdev->hopcount); - - return rc; -} - -/** * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device * @port: Master port to send transaction * @hopcount: Number of hops to the device @@ -837,7 +561,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount) * Recursively enumerates a RIO network. Transactions are sent via the * master port passed in @port. */ -static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port, +static int rio_enum_peer(struct rio_net *net, struct rio_mport *port, u8 hopcount, struct rio_dev *prev, int prev_port) { struct rio_dev *rdev; @@ -1044,7 +768,7 @@ static int rio_enum_complete(struct rio_mport *port) * Recursively discovers a RIO network. Transactions are sent via the * master port passed in @port. */ -static int __devinit +static int rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid, u8 hopcount, struct rio_dev *prev, int prev_port) { @@ -1151,7 +875,7 @@ static int rio_mport_is_active(struct rio_mport *port) * network list of associated master ports. Returns a * RIO network pointer on success or %NULL on failure. */ -static struct rio_net __devinit *rio_alloc_net(struct rio_mport *port, +static struct rio_net *rio_alloc_net(struct rio_mport *port, int do_enum, u16 start) { struct rio_net *net; @@ -1220,12 +944,9 @@ static void rio_update_route_tables(struct rio_net *net) sport = RIO_GET_PORT_NUM(swrdev->swpinfo); - if (rswitch->add_entry) { - rio_route_add_entry(swrdev, - RIO_GLOBAL_TABLE, destid, - sport, 0); - rswitch->route_table[destid] = sport; - } + rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE, + destid, sport, 0); + rswitch->route_table[destid] = sport; } } } @@ -1241,8 +962,8 @@ static void rio_update_route_tables(struct rio_net *net) static void rio_init_em(struct rio_dev *rdev) { if (rio_is_switch(rdev) && (rdev->em_efptr) && - (rdev->rswitch->em_init)) { - rdev->rswitch->em_init(rdev); + rdev->rswitch->ops && rdev->rswitch->ops->em_init) { + rdev->rswitch->ops->em_init(rdev); } } @@ -1260,19 +981,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int __devinit rio_enum_mport(struct rio_mport *mport) +static int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1362,14 +1094,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int __devinit rio_disc_mport(struct rio_mport *mport) +static int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1379,6 +1113,11 @@ int __devinit rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; @@ -1421,3 +1160,42 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .owner = THIS_MODULE, + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360989b..cdb005c0094 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -27,6 +27,7 @@ field##_show(struct device *dev, struct device_attribute *attr, char *buf) \ \ return sprintf(buf, format_string, rdev->field); \ } \ +static DEVICE_ATTR_RO(field); rio_config_attr(did, "0x%04x\n"); rio_config_attr(vid, "0x%04x\n"); @@ -54,6 +55,7 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch return (str - buf); } +static DEVICE_ATTR_RO(routes); static ssize_t lprev_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -63,6 +65,7 @@ static ssize_t lprev_show(struct device *dev, return sprintf(buf, "%s\n", (rdev->prev) ? rio_name(rdev->prev) : "root"); } +static DEVICE_ATTR_RO(lprev); static ssize_t lnext_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -83,22 +86,39 @@ static ssize_t lnext_show(struct device *dev, return str - buf; } +static DEVICE_ATTR_RO(lnext); -struct device_attribute rio_dev_attrs[] = { - __ATTR_RO(did), - __ATTR_RO(vid), - __ATTR_RO(device_rev), - __ATTR_RO(asm_did), - __ATTR_RO(asm_vid), - __ATTR_RO(asm_rev), - __ATTR_RO(lprev), - __ATTR_RO(destid), - __ATTR_NULL, +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rio_dev *rdev = to_rio_dev(dev); + + return sprintf(buf, "rapidio:v%04Xd%04Xav%04Xad%04X\n", + rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *rio_dev_attrs[] = { + &dev_attr_did.attr, + &dev_attr_vid.attr, + &dev_attr_device_rev.attr, + &dev_attr_asm_did.attr, + &dev_attr_asm_vid.attr, + &dev_attr_asm_rev.attr, + &dev_attr_lprev.attr, + &dev_attr_destid.attr, + &dev_attr_modalias.attr, + NULL, +}; + +static const struct attribute_group rio_dev_group = { + .attrs = rio_dev_attrs, }; -static DEVICE_ATTR(routes, S_IRUGO, routes_show, NULL); -static DEVICE_ATTR(lnext, S_IRUGO, lnext_show, NULL); -static DEVICE_ATTR(hopcount, S_IRUGO, hopcount_show, NULL); +const struct attribute_group *rio_dev_groups[] = { + &rio_dev_group, + NULL, +}; static ssize_t rio_read_config(struct file *filp, struct kobject *kobj, @@ -257,8 +277,6 @@ int rio_create_sysfs_dev_files(struct rio_dev *rdev) err |= device_create_file(&rdev->dev, &dev_attr_routes); err |= device_create_file(&rdev->dev, &dev_attr_lnext); err |= device_create_file(&rdev->dev, &dev_attr_hopcount); - if (!err && rdev->rswitch->sw_sysfs) - err = rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_CREATE); } if (err) @@ -281,7 +299,85 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) device_remove_file(&rdev->dev, &dev_attr_routes); device_remove_file(&rdev->dev, &dev_attr_lnext); device_remove_file(&rdev->dev, &dev_attr_hopcount); - if (rdev->rswitch->sw_sysfs) - rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + rc = rio_mport_scan((int)val); +exit: + if (!rc) + rc = count; + + return rc; +} +static BUS_ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store); + +static struct attribute *rio_bus_attrs[] = { + &bus_attr_scan.attr, + NULL, +}; + +static const struct attribute_group rio_bus_group = { + .attrs = rio_bus_attrs, +}; + +const struct attribute_group *rio_bus_groups[] = { + &rio_bus_group, + NULL, +}; + +static ssize_t +port_destid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct rio_mport *mport = to_rio_mport(dev); + + if (mport) + return sprintf(buf, "0x%04x\n", mport->host_deviceid); + else + return -ENODEV; +} +static DEVICE_ATTR_RO(port_destid); + +static ssize_t sys_size_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct rio_mport *mport = to_rio_mport(dev); + + if (mport) + return sprintf(buf, "%u\n", mport->sys_size); + else + return -ENODEV; +} +static DEVICE_ATTR_RO(sys_size); + +static struct attribute *rio_mport_attrs[] = { + &dev_attr_port_destid.attr, + &dev_attr_sys_size.attr, + NULL, +}; + +static const struct attribute_group rio_mport_group = { + .attrs = rio_mport_attrs, +}; + +const struct attribute_group *rio_mport_groups[] = { + &rio_mport_group, + NULL, +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index c17ae22567e..a54ba0494dd 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -5,9 +5,8 @@ * Copyright 2005 MontaVista Software, Inc. * Matt Porter <mporter@kernel.crashing.org> * - * Copyright 2009 Integrated Device Technology, Inc. + * Copyright 2009 - 2013 Integrated Device Technology, Inc. * Alex Bounine <alexandre.bounine@idt.com> - * - Added Port-Write/Error Management initialization and handling * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -31,7 +30,23 @@ #include "rio.h" +MODULE_DESCRIPTION("RapidIO Subsystem Core"); +MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>"); +MODULE_AUTHOR("Alexandre Bounine <alexandre.bounine@idt.com>"); +MODULE_LICENSE("GPL"); + +static int hdid[RIO_MAX_MPORTS]; +static int ids_num; +module_param_array(hdid, int, &ids_num, 0); +MODULE_PARM_DESC(hdid, + "Destination ID assignment to local RapidIO controllers"); + +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static LIST_HEAD(rio_scans); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -53,6 +68,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) } /** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + +/** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource * @dev_id: Device specific pointer to pass on event @@ -401,7 +442,7 @@ EXPORT_SYMBOL_GPL(rio_release_inb_pwrite); /** * rio_map_inb_region -- Map inbound memory region. * @mport: Master port. - * @lstart: physical address of memory region to be mapped + * @local: physical address of memory region to be mapped * @rbase: RIO base address assigned to this window * @size: Size of the memory region * @rflags: Flags for mapping. @@ -489,6 +530,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +563,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +588,69 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +716,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -836,8 +943,8 @@ int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg) /* * Process the port-write notification from switch */ - if (rdev->rswitch->em_handle) - rdev->rswitch->em_handle(rdev, portnum); + if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle) + rdev->rswitch->ops->em_handle(rdev, portnum); rio_read_config_32(rdev, rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum), @@ -941,6 +1048,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1105,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1071,8 +1180,9 @@ struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) * @route_destid: destID entry in the RT * @route_port: destination port for specified destID */ -int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table, u16 route_destid, u8 route_port) +static int +rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port) { if (table == RIO_GLOBAL_TABLE) { rio_mport_write_config_32(mport, destid, hopcount, @@ -1098,8 +1208,9 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, * @route_destid: destID entry in the RT * @route_port: returned destination port for specified destID */ -int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table, u16 route_destid, u8 *route_port) +static int +rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port) { u32 result; @@ -1123,8 +1234,9 @@ int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, * @hopcount: Number of switch hops to the device * @table: routing table ID (global or port-specific) */ -int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, - u16 table) +static int +rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table) { u32 max_destid = 0xff; u32 i, pef, id_inc = 1, ext_cfg = 0; @@ -1165,6 +1277,234 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, return 0; } +/** + * rio_lock_device - Acquires host device lock for specified device + * @port: Master port to send transaction + * @destid: Destination ID for device/switch + * @hopcount: Hopcount to reach switch + * @wait_ms: Max wait time in msec (0 = no timeout) + * + * Attepts to acquire host device lock for specified device + * Returns 0 if device lock acquired or EINVAL if timeout expires. + */ +int rio_lock_device(struct rio_mport *port, u16 destid, + u8 hopcount, int wait_ms) +{ + u32 result; + int tcnt = 0; + + /* Attempt to acquire device lock */ + rio_mport_write_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, port->host_deviceid); + rio_mport_read_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + + while (result != port->host_deviceid) { + if (wait_ms != 0 && tcnt == wait_ms) { + pr_debug("RIO: timeout when locking device %x:%x\n", + destid, hopcount); + return -EINVAL; + } + + /* Delay a bit */ + mdelay(1); + tcnt++; + /* Try to acquire device lock again */ + rio_mport_write_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, + port->host_deviceid); + rio_mport_read_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + } + + return 0; +} +EXPORT_SYMBOL_GPL(rio_lock_device); + +/** + * rio_unlock_device - Releases host device lock for specified device + * @port: Master port to send transaction + * @destid: Destination ID for device/switch + * @hopcount: Hopcount to reach switch + * + * Returns 0 if device lock released or EINVAL if fails. + */ +int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount) +{ + u32 result; + + /* Release device lock */ + rio_mport_write_config_32(port, destid, + hopcount, + RIO_HOST_DID_LOCK_CSR, + port->host_deviceid); + rio_mport_read_config_32(port, destid, hopcount, + RIO_HOST_DID_LOCK_CSR, &result); + if ((result & 0xffff) != 0xffff) { + pr_debug("RIO: badness when releasing device lock %x:%x\n", + destid, hopcount); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unlock_device); + +/** + * rio_route_add_entry- Add a route entry to a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @route_destid: Destination ID to be routed + * @route_port: Port number to be routed + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific add_entry() method to add a route + * entry into a switch routing table. Otherwise uses standard RT update method + * as defined by RapidIO specification. A specific routing table can be selected + * using the @table argument if a switch has per port routing tables or + * the standard (or global) table may be used by passing + * %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_add_entry(struct rio_dev *rdev, + u16 table, u16 route_destid, u8 route_port, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->add_entry == NULL) { + rc = rio_std_route_add_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, + route_destid, route_port); + } else if (try_module_get(ops->owner)) { + rc = ops->add_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, route_destid, + route_port); + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_add_entry); + +/** + * rio_route_get_entry- Read an entry from a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @route_destid: Destination ID to be routed + * @route_port: Pointer to read port number into + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific get_entry() method to fetch a route + * entry from a switch routing table. Otherwise uses standard RT read method + * as defined by RapidIO specification. A specific routing table can be selected + * using the @table argument if a switch has per port routing tables or + * the standard (or global) table may be used by passing + * %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_get_entry(struct rio_dev *rdev, u16 table, + u16 route_destid, u8 *route_port, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->get_entry == NULL) { + rc = rio_std_route_get_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, + route_destid, route_port); + } else if (try_module_get(ops->owner)) { + rc = ops->get_entry(rdev->net->hport, rdev->destid, + rdev->hopcount, table, route_destid, + route_port); + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_get_entry); + +/** + * rio_route_clr_table - Clear a switch routing table + * @rdev: RIO device + * @table: Routing table ID + * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock) + * + * If available calls the switch specific clr_table() method to clear a switch + * routing table. Otherwise uses standard RT write method as defined by RapidIO + * specification. A specific routing table can be selected using the @table + * argument if a switch has per port routing tables or the standard (or global) + * table may be used by passing %RIO_GLOBAL_TABLE in @table. + * + * Returns %0 on success or %-EINVAL on failure. + */ +int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock) +{ + int rc = -EINVAL; + struct rio_switch_ops *ops = rdev->rswitch->ops; + + if (lock) { + rc = rio_lock_device(rdev->net->hport, rdev->destid, + rdev->hopcount, 1000); + if (rc) + return rc; + } + + spin_lock(&rdev->rswitch->lock); + + if (ops == NULL || ops->clr_table == NULL) { + rc = rio_std_route_clr_table(rdev->net->hport, rdev->destid, + rdev->hopcount, table); + } else if (try_module_get(ops->owner)) { + rc = ops->clr_table(rdev->net->hport, rdev->destid, + rdev->hopcount, table); + + module_put(ops->owner); + } + + spin_unlock(&rdev->rswitch->lock); + + if (lock) + rio_unlock_device(rdev->net->hport, rdev->destid, + rdev->hopcount); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_route_clr_table); + #ifdef CONFIG_RAPIDIO_DMA_ENGINE static bool rio_chan_filter(struct dma_chan *chan, void *arg) @@ -1246,11 +1586,192 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery operations structure + * + * Registers enumeration/discovery operations with RapidIO subsystem and + * attaches it to the specified mport device (or all available mports + * if RIO_MPORT_ANY is specified). + * + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY skips mports with valid scan routines (no error). + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + struct rio_scan_node *scan; + int rc = 0; + + pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id); + + if ((mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS) || + !scan_ops) + return -EINVAL; + + mutex_lock(&rio_mport_list_lock); + + /* + * Check if there is another enumerator already registered for + * the same mport ID (including RIO_MPORT_ANY). Multiple enumerators + * for the same mport ID are not supported. + */ + list_for_each_entry(scan, &rio_scans, node) { + if (scan->mport_id == mport_id) { + rc = -EBUSY; + goto err_out; + } + } + + /* + * Allocate and initialize new scan registration node. + */ + scan = kzalloc(sizeof(*scan), GFP_KERNEL); + if (!scan) { + rc = -ENOMEM; + goto err_out; + } + + scan->mport_id = mport_id; + scan->ops = scan_ops; + + /* + * Traverse the list of registered mports to attach this new scan. + * + * The new scan with matching mport ID overrides any previously attached + * scan assuming that old scan (if any) is the default one (based on the + * enumerator registration check above). + * If the new scan is the global one, it will be attached only to mports + * that do not have their own individual operations already attached. + */ + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) { + port->nscan = scan_ops; + break; + } else if (mport_id == RIO_MPORT_ANY && !port->nscan) + port->nscan = scan_ops; + } + + list_add_tail(&scan->node, &rio_scans); + +err_out: + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = apply to all mports that use + * the specified scan_ops) + * @scan_ops: enumeration/discovery operations structure + * + * Removes enumeration or discovery method assigned to the specified mport + * device. If RIO_MPORT_ANY is specified, removes the specified operations from + * all mports that have them attached. + */ +int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + struct rio_scan_node *scan; + + pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id); + + if (mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS) + return -EINVAL; + + mutex_lock(&rio_mport_list_lock); + + list_for_each_entry(port, &rio_mports, node) + if (port->id == mport_id || + (mport_id == RIO_MPORT_ANY && port->nscan == scan_ops)) + port->nscan = NULL; + + list_for_each_entry(scan, &rio_scans, node) { + if (scan->mport_id == mport_id) { + list_del(&scan->node); + kfree(scan); + break; + } + } + + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + +/** + * rio_mport_scan - execute enumeration/discovery on the specified mport + * @mport_id: number (ID) of mport device + */ +int rio_mport_scan(int mport_id) +{ + struct rio_mport *port = NULL; + int rc; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + mutex_unlock(&rio_mport_list_lock); + return -ENODEV; +found: + if (!port->nscan) { + mutex_unlock(&rio_mport_list_lock); + return -EINVAL; + } + + if (!try_module_get(port->nscan->owner)) { + mutex_unlock(&rio_mport_list_lock); + return -ENODEV; + } + + mutex_unlock(&rio_mport_list_lock); + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); + + module_put(port->nscan->owner); + return rc; +} + static void rio_fixup_device(struct rio_dev *dev) { } -static int __devinit rio_init(void) +static int rio_init(void) { struct rio_dev *dev = NULL; @@ -1267,17 +1788,20 @@ struct rio_disc_work { struct rio_mport *mport; }; -static void __devinit disc_work_handler(struct work_struct *_work) +static void disc_work_handler(struct work_struct *_work) { struct rio_disc_work *work; work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + if (try_module_get(work->mport->nscan->owner)) { + work->mport->nscan->discover(work->mport, 0); + module_put(work->mport->nscan->owner); + } } -int __devinit rio_init_mports(void) +int rio_init_mports(void) { struct rio_mport *port; struct rio_disc_work *work; @@ -1290,12 +1814,17 @@ int __devinit rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan && try_module_get(port->nscan->owner)) { + port->nscan->enumerate(port, 0); + module_put(port->nscan->owner); + } + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1305,7 +1834,7 @@ int __devinit rio_init_mports(void) * for each of them. If the code below fails to allocate needed * resources, exit without error to keep results of enumeration * process (if any). - * TODO: Implement restart of dicovery process for all or + * TODO: Implement restart of discovery process for all or * individual discovering mports. */ rio_wq = alloc_workqueue("riodisc", 0, 0); @@ -1322,8 +1851,9 @@ int __devinit rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); @@ -1332,6 +1862,7 @@ int __devinit rio_init_mports(void) } flush_workqueue(rio_wq); + mutex_unlock(&rio_mport_list_lock); pr_debug("RIO: destroy discovery workqueue\n"); destroy_workqueue(rio_wq); kfree(work); @@ -1342,28 +1873,19 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - -static int hdids[RIO_MAX_MPORTS + 1]; - static int rio_get_hdid(int index) { - if (!hdids[0] || hdids[0] <= index || index >= RIO_MAX_MPORTS) + if (ids_num == 0 || ids_num <= index || index >= RIO_MAX_MPORTS) return -1; - return hdids[index + 1]; -} - -static int rio_hdid_setup(char *str) -{ - (void)get_options(str, ARRAY_SIZE(hdids), hdids); - return 1; + return hdid[index]; } -__setup("riohdid=", rio_hdid_setup); - int rio_register_mport(struct rio_mport *port) { + struct rio_scan_node *scan = NULL; + int res = 0; + if (next_portid >= RIO_MAX_MPORTS) { pr_err("RIO: reached specified max number of mports\n"); return 1; @@ -1371,9 +1893,39 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + + dev_set_name(&port->dev, "rapidio%d", port->id); + port->dev.class = &rio_mport_class; + + res = device_register(&port->dev); + if (res) + dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n", + port->id, res); + else + dev_dbg(&port->dev, "RIO: mport%d registered\n", port->id); + + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + + /* + * Check if there are any registered enumeration/discovery operations + * that have to be attached to the added mport. + */ + list_for_each_entry(scan, &rio_scans, node) { + if (port->id == scan->mport_id || + scan->mport_id == RIO_MPORT_ANY) { + port->nscan = scan->ops; + if (port->id == scan->mport_id) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + pr_debug("RIO: %s %s id=%d\n", __func__, port->name, port->id); return 0; } +EXPORT_SYMBOL_GPL(rio_register_mport); EXPORT_SYMBOL_GPL(rio_local_get_device_id); EXPORT_SYMBOL_GPL(rio_get_device); @@ -1386,3 +1938,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414f15e..2d0550e08ea 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include <linux/rio.h> #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,46 +28,29 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); -extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 route_port); -extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 *route_port); -extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table); +extern int rio_lock_device(struct rio_mport *port, u16 destid, + u8 hopcount, int wait_ms); +extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount); +extern int rio_route_add_entry(struct rio_dev *rdev, + u16 table, u16 route_destid, u8 route_port, int lock); +extern int rio_route_get_entry(struct rio_dev *rdev, u16 table, + u16 route_destid, u8 *route_port, int lock); +extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops); +extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); +extern int rio_mport_scan(int mport_id); /* Structures internal to the RIO core code */ -extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; - -extern struct rio_switch_ops __start_rio_switch_ops[]; -extern struct rio_switch_ops __end_rio_switch_ops[]; - -/* Helpers internal to the RIO core code */ -#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \ - static const struct rio_switch_ops __rio_switch_##name __used \ - __section(section) = { vid, did, init_hook }; - -/** - * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine - * @vid: RIO vendor ID - * @did: RIO device ID - * @init_hook: Callback that performs switch-specific initialization - * - * Manipulating switch route tables and error management in RIO - * is switch specific. This registers a switch by vendor and device ID with - * initialization callback for setting up switch operations and (if required) - * hardware initialization. A &struct rio_switch_ops is initialized with - * pointer to the init routine and placed into a RIO-specific kernel section. - */ -#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook) \ - DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \ - vid, did, init_hook) +extern const struct attribute_group *rio_dev_groups[]; +extern const struct attribute_group *rio_bus_groups[]; +extern const struct attribute_group *rio_mport_groups[]; #define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16)) #define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16)) diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig index f47fee5d456..345841562f9 100644 --- a/drivers/rapidio/switches/Kconfig +++ b/drivers/rapidio/switches/Kconfig @@ -2,34 +2,23 @@ # RapidIO switches configuration # config RAPIDIO_TSI57X - bool "IDT Tsi57x SRIO switches support" - depends on RAPIDIO + tristate "IDT Tsi57x SRIO switches support" ---help--- Includes support for IDT Tsi57x family of serial RapidIO switches. config RAPIDIO_CPS_XX - bool "IDT CPS-xx SRIO switches support" - depends on RAPIDIO + tristate "IDT CPS-xx SRIO switches support" ---help--- Includes support for IDT CPS-16/12/10/8 serial RapidIO switches. config RAPIDIO_TSI568 - bool "Tsi568 SRIO switch support" - depends on RAPIDIO + tristate "Tsi568 SRIO switch support" default n ---help--- Includes support for IDT Tsi568 serial RapidIO switch. config RAPIDIO_CPS_GEN2 - bool "IDT CPS Gen.2 SRIO switch support" - depends on RAPIDIO + tristate "IDT CPS Gen.2 SRIO switch support" default n ---help--- Includes support for ITD CPS Gen.2 serial RapidIO switches. - -config RAPIDIO_TSI500 - bool "Tsi500 Parallel RapidIO switch support" - depends on RAPIDIO - default n - ---help--- - Includes support for IDT Tsi500 parallel RapidIO switch. diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile index c4d3acc3c71..051cc6b3818 100644 --- a/drivers/rapidio/switches/Makefile +++ b/drivers/rapidio/switches/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o -obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c index 809b7a3336b..9f7fe21580b 100644 --- a/drivers/rapidio/switches/idt_gen2.c +++ b/drivers/rapidio/switches/idt_gen2.c @@ -11,10 +11,13 @@ */ #include <linux/stat.h> +#include <linux/module.h> #include <linux/rio.h> #include <linux/rio_drv.h> #include <linux/rio_ids.h> #include <linux/delay.h> + +#include <asm/page.h> #include "../rio.h" #define LOCAL_RTE_CONF_DESTID_SEL 0x010070 @@ -387,12 +390,12 @@ idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL); -static int idtg2_sysfs(struct rio_dev *rdev, int create) +static int idtg2_sysfs(struct rio_dev *rdev, bool create) { struct device *dev = &rdev->dev; int err = 0; - if (create == RIO_SW_SYSFS_CREATE) { + if (create) { /* Initialize sysfs entries */ err = device_create_file(dev, &dev_attr_errlog); if (err) @@ -403,29 +406,90 @@ static int idtg2_sysfs(struct rio_dev *rdev, int create) return err; } -static int idtg2_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops idtg2_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtg2_route_add_entry, + .get_entry = idtg2_route_get_entry, + .clr_table = idtg2_route_clr_table, + .set_domain = idtg2_set_domain, + .get_domain = idtg2_get_domain, + .em_init = idtg2_em_init, + .em_handle = idtg2_em_handler, +}; + +static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = idtg2_route_add_entry; - rdev->rswitch->get_entry = idtg2_route_get_entry; - rdev->rswitch->clr_table = idtg2_route_clr_table; - rdev->rswitch->set_domain = idtg2_set_domain; - rdev->rswitch->get_domain = idtg2_get_domain; - rdev->rswitch->em_init = idtg2_em_init; - rdev->rswitch->em_handle = idtg2_em_handler; - rdev->rswitch->sw_sysfs = idtg2_sysfs; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtg2_switch_ops; + + if (rdev->do_enum) { /* Ensure that default routing is disabled on startup */ rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE); } + /* Create device-specific sysfs attributes */ + idtg2_sysfs(rdev, true); + + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1432, idtg2_switch_init); +static void idtg2_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &idtg2_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + + /* Remove device-specific sysfs attributes */ + idtg2_sysfs(rdev, false); + + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id idtg2_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtg2_driver = { + .name = "idt_gen2", + .id_table = idtg2_id_table, + .probe = idtg2_probe, + .remove = idtg2_remove, +}; + +static int __init idtg2_init(void) +{ + return rio_register_driver(&idtg2_driver); +} + +static void __exit idtg2_exit(void) +{ + pr_debug("RIO: %s\n", __func__); + rio_unregister_driver(&idtg2_driver); + pr_debug("RIO: %s done\n", __func__); +} + +device_initcall(idtg2_init); +module_exit(idtg2_exit); + +MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c index d06ee2d44b4..7fbb60d3179 100644 --- a/drivers/rapidio/switches/idtcps.c +++ b/drivers/rapidio/switches/idtcps.c @@ -13,6 +13,7 @@ #include <linux/rio.h> #include <linux/rio_drv.h> #include <linux/rio_ids.h> +#include <linux/module.h> #include "../rio.h" #define CPS_DEFAULT_ROUTE 0xde @@ -118,18 +119,31 @@ idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, return 0; } -static int idtcps_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops idtcps_switch_ops = { + .owner = THIS_MODULE, + .add_entry = idtcps_route_add_entry, + .get_entry = idtcps_route_get_entry, + .clr_table = idtcps_route_clr_table, + .set_domain = idtcps_set_domain, + .get_domain = idtcps_get_domain, + .em_init = NULL, + .em_handle = NULL, +}; + +static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = idtcps_route_add_entry; - rdev->rswitch->get_entry = idtcps_route_get_entry; - rdev->rswitch->clr_table = idtcps_route_clr_table; - rdev->rswitch->set_domain = idtcps_set_domain; - rdev->rswitch->get_domain = idtcps_get_domain; - rdev->rswitch->em_init = NULL; - rdev->rswitch->em_handle = NULL; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &idtcps_switch_ops; + + if (rdev->do_enum) { /* set TVAL = ~50us */ rio_write_config_32(rdev, rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8); @@ -138,12 +152,52 @@ static int idtcps_switch_init(struct rio_dev *rdev, int do_enum) RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE); } + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init); +static void idtcps_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &idtcps_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id idtcps_id_table[] = { + {RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)}, + {RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver idtcps_driver = { + .name = "idtcps", + .id_table = idtcps_id_table, + .probe = idtcps_probe, + .remove = idtcps_remove, +}; + +static int __init idtcps_init(void) +{ + return rio_register_driver(&idtcps_driver); +} + +static void __exit idtcps_exit(void) +{ + rio_unregister_driver(&idtcps_driver); +} + +device_initcall(idtcps_init); +module_exit(idtcps_exit); + +MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c deleted file mode 100644 index 914eddd5aa4..00000000000 --- a/drivers/rapidio/switches/tsi500.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * RapidIO Tsi500 switch support - * - * Copyright 2009-2010 Integrated Device Technology, Inc. - * Alexandre Bounine <alexandre.bounine@idt.com> - * - Modified switch operations initialization. - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/rio.h> -#include <linux/rio_drv.h> -#include <linux/rio_ids.h> -#include "../rio.h" - -static int -tsi500_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port) -{ - int i; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) { - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - for (i=0;i<4;i++) - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*i), result | (route_port << (4*(route_destid & 0x7)))); - } - else { - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - result &= ~(0xf << (4*(route_destid & 0x7))); - rio_mport_write_config_32(mport, destid, hopcount, offset + (0x20000*table), result | (route_port << (4*(route_destid & 0x7)))); - } - - return 0; -} - -static int -tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port) -{ - int ret = 0; - u32 offset = 0x10000 + 0xa00 + ((route_destid / 2)&~0x3); - u32 result; - - if (table == 0xff) - rio_mport_read_config_32(mport, destid, hopcount, offset, &result); - else - rio_mport_read_config_32(mport, destid, hopcount, offset + (0x20000*table), &result); - - result &= 0xf << (4*(route_destid & 0x7)); - *route_port = result >> (4*(route_destid & 0x7)); - if (*route_port > 3) - ret = -1; - - return ret; -} - -static int tsi500_switch_init(struct rio_dev *rdev, int do_enum) -{ - pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi500_route_add_entry; - rdev->rswitch->get_entry = tsi500_route_get_entry; - rdev->rswitch->clr_table = NULL; - rdev->rswitch->set_domain = NULL; - rdev->rswitch->get_domain = NULL; - rdev->rswitch->em_init = NULL; - rdev->rswitch->em_handle = NULL; - - return 0; -} - -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init); diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c index 3994c00aa01..8a43561b9d1 100644 --- a/drivers/rapidio/switches/tsi568.c +++ b/drivers/rapidio/switches/tsi568.c @@ -19,6 +19,7 @@ #include <linux/rio_drv.h> #include <linux/rio_ids.h> #include <linux/delay.h> +#include <linux/module.h> #include "../rio.h" /* Global (broadcast) route registers */ @@ -129,18 +130,70 @@ tsi568_em_init(struct rio_dev *rdev) return 0; } -static int tsi568_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops tsi568_switch_ops = { + .owner = THIS_MODULE, + .add_entry = tsi568_route_add_entry, + .get_entry = tsi568_route_get_entry, + .clr_table = tsi568_route_clr_table, + .set_domain = NULL, + .get_domain = NULL, + .em_init = tsi568_em_init, + .em_handle = NULL, +}; + +static int tsi568_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi568_route_add_entry; - rdev->rswitch->get_entry = tsi568_route_get_entry; - rdev->rswitch->clr_table = tsi568_route_clr_table; - rdev->rswitch->set_domain = NULL; - rdev->rswitch->get_domain = NULL; - rdev->rswitch->em_init = tsi568_em_init; - rdev->rswitch->em_handle = NULL; + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + + rdev->rswitch->ops = &tsi568_switch_ops; + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init); +static void tsi568_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &tsi568_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id tsi568_id_table[] = { + {RIO_DEVICE(RIO_DID_TSI568, RIO_VID_TUNDRA)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver tsi568_driver = { + .name = "tsi568", + .id_table = tsi568_id_table, + .probe = tsi568_probe, + .remove = tsi568_remove, +}; + +static int __init tsi568_init(void) +{ + return rio_register_driver(&tsi568_driver); +} + +static void __exit tsi568_exit(void) +{ + rio_unregister_driver(&tsi568_driver); +} + +device_initcall(tsi568_init); +module_exit(tsi568_exit); + +MODULE_DESCRIPTION("IDT Tsi568 Serial RapidIO switch driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c index db8b8028988..42c8b014fe1 100644 --- a/drivers/rapidio/switches/tsi57x.c +++ b/drivers/rapidio/switches/tsi57x.c @@ -19,6 +19,7 @@ #include <linux/rio_drv.h> #include <linux/rio_ids.h> #include <linux/delay.h> +#include <linux/module.h> #include "../rio.h" /* Global (broadcast) route registers */ @@ -292,27 +293,79 @@ exit_es: return 0; } -static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum) +static struct rio_switch_ops tsi57x_switch_ops = { + .owner = THIS_MODULE, + .add_entry = tsi57x_route_add_entry, + .get_entry = tsi57x_route_get_entry, + .clr_table = tsi57x_route_clr_table, + .set_domain = tsi57x_set_domain, + .get_domain = tsi57x_get_domain, + .em_init = tsi57x_em_init, + .em_handle = tsi57x_em_handler, +}; + +static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id) { pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); - rdev->rswitch->add_entry = tsi57x_route_add_entry; - rdev->rswitch->get_entry = tsi57x_route_get_entry; - rdev->rswitch->clr_table = tsi57x_route_clr_table; - rdev->rswitch->set_domain = tsi57x_set_domain; - rdev->rswitch->get_domain = tsi57x_get_domain; - rdev->rswitch->em_init = tsi57x_em_init; - rdev->rswitch->em_handle = tsi57x_em_handler; - - if (do_enum) { + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + rdev->rswitch->ops = &tsi57x_switch_ops; + + if (rdev->do_enum) { /* Ensure that default routing is disabled on startup */ rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, RIO_INVALID_ROUTE); } + spin_unlock(&rdev->rswitch->lock); return 0; } -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init); -DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init); +static void tsi57x_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &tsi57x_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static struct rio_device_id tsi57x_id_table[] = { + {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver tsi57x_driver = { + .name = "tsi57x", + .id_table = tsi57x_id_table, + .probe = tsi57x_probe, + .remove = tsi57x_remove, +}; + +static int __init tsi57x_init(void) +{ + return rio_register_driver(&tsi57x_driver); +} + +static void __exit tsi57x_exit(void) +{ + rio_unregister_driver(&tsi57x_driver); +} + +device_initcall(tsi57x_init); +module_exit(tsi57x_exit); + +MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); |