diff options
Diffstat (limited to 'drivers/pwm/Kconfig')
| -rw-r--r-- | drivers/pwm/Kconfig | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig new file mode 100644 index 00000000000..4ad7b89a4cb --- /dev/null +++ b/drivers/pwm/Kconfig @@ -0,0 +1,295 @@ +menuconfig PWM + bool "Pulse-Width Modulation (PWM) Support" + help + Generic Pulse-Width Modulation (PWM) support. + + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. + +if PWM + +config PWM_SYSFS + bool + default y if SYSFS + +config PWM_AB8500 + tristate "AB8500 PWM support" + depends on AB8500_CORE && ARCH_U8500 + help + Generic PWM framework driver for Analog Baseband AB8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-ab8500. + +config PWM_ATMEL + tristate "Atmel PWM support" + depends on ARCH_AT91 + help + Generic PWM framework driver for Atmel SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel. + +config PWM_ATMEL_TCB + tristate "Atmel TC Block PWM support" + depends on ATMEL_TCLIB && OF + help + Generic PWM framework driver for Atmel Timer Counter Block. + + A Timer Counter Block provides 6 PWM devices grouped by 2. + Devices in a given group must have the same period. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-tcb. + +config PWM_BCM_KONA + tristate "Kona PWM support" + depends on ARCH_BCM_MOBILE + help + Generic PWM framework driver for Broadcom Kona PWM block. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-kona. + +config PWM_BFIN + tristate "Blackfin PWM support" + depends on BFIN_GPTIMERS + help + Generic PWM framework driver for Blackfin. + + To compile this driver as a module, choose M here: the module + will be called pwm-bfin. + +config PWM_CLPS711X + tristate "CLPS711X PWM support" + depends on ARCH_CLPS711X || COMPILE_TEST + help + Generic PWM framework driver for Cirrus Logic CLPS711X. + + To compile this driver as a module, choose M here: the module + will be called pwm-clps711x. + +config PWM_EP93XX + tristate "Cirrus Logic EP93xx PWM support" + depends on ARCH_EP93XX + help + Generic PWM framework driver for Cirrus Logic EP93xx. + + To compile this driver as a module, choose M here: the module + will be called pwm-ep93xx. + +config PWM_FSL_FTM + tristate "Freescale FlexTimer Module (FTM) PWM support" + depends on OF + help + Generic FTM PWM framework driver for Freescale VF610 and + Layerscape LS-1 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-fsl-ftm. + +config PWM_IMX + tristate "i.MX PWM support" + depends on ARCH_MXC + help + Generic PWM framework driver for i.MX. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx. + +config PWM_JZ4740 + tristate "Ingenic JZ4740 PWM support" + depends on MACH_JZ4740 + help + Generic PWM framework driver for Ingenic JZ4740 based + machines. + + To compile this driver as a module, choose M here: the module + will be called pwm-jz4740. + +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + +config PWM_LPC32XX + tristate "LPC32XX PWM support" + depends on ARCH_LPC32XX + help + Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two + PWM controllers. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc32xx. + +config PWM_LPSS + tristate "Intel LPSS PWM support" + depends on ACPI + help + Generic PWM framework driver for Intel Low Power Subsystem PWM + controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss. + +config PWM_MXS + tristate "Freescale MXS PWM support" + depends on ARCH_MXS && OF + select STMP_DEVICE + help + Generic PWM framework driver for Freescale MXS. + + To compile this driver as a module, choose M here: the module + will be called pwm-mxs. + +config PWM_PCA9685 + tristate "NXP PCA9685 PWM driver" + depends on OF && I2C + select REGMAP_I2C + help + Generic PWM framework driver for NXP PCA9685 LED controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-pca9685. + +config PWM_PUV3 + tristate "PKUnity NetBook-0916 PWM support" + depends on ARCH_PUV3 + help + Generic PWM framework driver for PKUnity NetBook-0916. + + To compile this driver as a module, choose M here: the module + will be called pwm-puv3. + +config PWM_PXA + tristate "PXA PWM support" + depends on ARCH_PXA + help + Generic PWM framework driver for PXA. + + To compile this driver as a module, choose M here: the module + will be called pwm-pxa. + +config PWM_RENESAS_TPU + tristate "Renesas TPU PWM support" + depends on ARCH_SHMOBILE || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the Timer Pulse Unit (TPU) PWM controller found + in Renesas chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-renesas-tpu. + +config PWM_SAMSUNG + tristate "Samsung PWM support" + depends on PLAT_SAMSUNG + help + Generic PWM framework driver for Samsung. + + To compile this driver as a module, choose M here: the module + will be called pwm-samsung. + +config PWM_SPEAR + tristate "STMicroelectronics SPEAr PWM support" + depends on PLAT_SPEAR + depends on OF + help + Generic PWM framework driver for the PWM controller on ST + SPEAr SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-spear. + +config PWM_TEGRA + tristate "NVIDIA Tegra PWM support" + depends on ARCH_TEGRA + help + Generic PWM framework driver for the PWFM controller found on NVIDIA + Tegra SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-tegra. + +config PWM_TIECAP + tristate "ECAP PWM support" + depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + help + PWM driver support for the ECAP APWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiecap. + +config PWM_TIEHRPWM + tristate "EHRPWM PWM support" + depends on SOC_AM33XX || ARCH_DAVINCI_DA8XX + help + PWM driver support for the EHRPWM controller found on AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called pwm-tiehrpwm. + +config PWM_TIPWMSS + bool + default y if SOC_AM33XX && (PWM_TIECAP || PWM_TIEHRPWM) + help + PWM Subsystem driver support for AM33xx SOC. + + PWM submodules require PWM config space access from submodule + drivers and require common parent driver support. + +config PWM_TWL + tristate "TWL4030/6030 PWM support" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl. + +config PWM_TWL_LED + tristate "TWL4030/6030 PWM support for LED drivers" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030 LED terminals. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl-led. + +config PWM_VT8500 + tristate "vt8500 PWM support" + depends on ARCH_VT8500 + help + Generic PWM framework driver for vt8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-vt8500. + +endif |