diff options
Diffstat (limited to 'drivers/power/olpc_battery.c')
| -rw-r--r-- | drivers/power/olpc_battery.c | 138 |
1 files changed, 106 insertions, 32 deletions
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 0b0ff3a936a..1ec810ada5e 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -17,6 +17,7 @@ #include <linux/power_supply.h> #include <linux/jiffies.h> #include <linux/sched.h> +#include <linux/olpc-ec.h> #include <asm/olpc.h> @@ -231,11 +232,9 @@ static int olpc_bat_get_charge_full_design(union power_supply_propval *val) case POWER_SUPPLY_TECHNOLOGY_LiFe: switch (mfr) { - case 1: /* Gold Peak */ - val->intval = 2800000; - break; + case 1: /* Gold Peak, fall through */ case 2: /* BYD */ - val->intval = 3100000; + val->intval = 2800000; break; default: return -EIO; @@ -267,6 +266,55 @@ static int olpc_bat_get_charge_now(union power_supply_propval *val) return 0; } +static int olpc_bat_get_voltage_max_design(union power_supply_propval *val) +{ + uint8_t ec_byte; + union power_supply_propval tech; + int mfr; + int ret; + + ret = olpc_bat_get_tech(&tech); + if (ret) + return ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + mfr = ec_byte >> 4; + + switch (tech.intval) { + case POWER_SUPPLY_TECHNOLOGY_NiMH: + switch (mfr) { + case 1: /* Gold Peak */ + val->intval = 6000000; + break; + default: + return -EIO; + } + break; + + case POWER_SUPPLY_TECHNOLOGY_LiFe: + switch (mfr) { + case 1: /* Gold Peak */ + val->intval = 6400000; + break; + case 2: /* BYD */ + val->intval = 6500000; + break; + default: + return -EIO; + } + break; + + default: + return -EIO; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -401,6 +449,11 @@ static int olpc_bat_get_property(struct power_supply *psy, sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); val->strval = bat_serial; break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + ret = olpc_bat_get_voltage_max_design(val); + if (ret) + return ret; + break; default: ret = -EINVAL; break; @@ -428,6 +481,7 @@ static enum power_supply_property olpc_xo1_bat_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, }; /* XO-1.5 does not have ambient temperature property */ @@ -449,6 +503,7 @@ static enum power_supply_property olpc_xo15_bat_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, }; /* EEPROM reading goes completely around the power_supply API, sadly */ @@ -519,29 +574,35 @@ static struct device_attribute olpc_bat_error = { * Initialisation *********************************************************************/ -static struct platform_device *bat_pdev; - static struct power_supply olpc_bat = { + .name = "olpc-battery", .get_property = olpc_bat_get_property, .use_for_apm = 1, }; -void olpc_battery_trigger_uevent(unsigned long cause) +static int olpc_battery_suspend(struct platform_device *pdev, + pm_message_t state) { - if (cause & EC_SCI_SRC_ACPWR) - kobject_uevent(&olpc_ac.dev->kobj, KOBJ_CHANGE); - if (cause & (EC_SCI_SRC_BATERR|EC_SCI_SRC_BATSOC|EC_SCI_SRC_BATTERY)) - kobject_uevent(&olpc_bat.dev->kobj, KOBJ_CHANGE); + if (device_may_wakeup(olpc_ac.dev)) + olpc_ec_wakeup_set(EC_SCI_SRC_ACPWR); + else + olpc_ec_wakeup_clear(EC_SCI_SRC_ACPWR); + + if (device_may_wakeup(olpc_bat.dev)) + olpc_ec_wakeup_set(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC + | EC_SCI_SRC_BATERR); + else + olpc_ec_wakeup_clear(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC + | EC_SCI_SRC_BATERR); + + return 0; } -static int __init olpc_bat_init(void) +static int olpc_battery_probe(struct platform_device *pdev) { - int ret = 0; + int ret; uint8_t status; - if (!olpc_platform_info.ecver) - return -ENXIO; - /* * We've seen a number of EC protocol changes; this driver requires * the latest EC protocol, supported by 0x44 and above. @@ -558,15 +619,10 @@ static int __init olpc_bat_init(void) /* Ignore the status. It doesn't actually matter */ - bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0); - if (IS_ERR(bat_pdev)) - return PTR_ERR(bat_pdev); - - ret = power_supply_register(&bat_pdev->dev, &olpc_ac); + ret = power_supply_register(&pdev->dev, &olpc_ac); if (ret) - goto ac_failed; + return ret; - olpc_bat.name = bat_pdev->name; if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */ olpc_bat.properties = olpc_xo15_bat_props; olpc_bat.num_properties = ARRAY_SIZE(olpc_xo15_bat_props); @@ -575,7 +631,7 @@ static int __init olpc_bat_init(void) olpc_bat.num_properties = ARRAY_SIZE(olpc_xo1_bat_props); } - ret = power_supply_register(&bat_pdev->dev, &olpc_bat); + ret = power_supply_register(&pdev->dev, &olpc_bat); if (ret) goto battery_failed; @@ -587,7 +643,12 @@ static int __init olpc_bat_init(void) if (ret) goto error_failed; - goto success; + if (olpc_ec_wakeup_available()) { + device_set_wakeup_capable(olpc_ac.dev, true); + device_set_wakeup_capable(olpc_bat.dev, true); + } + + return 0; error_failed: device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); @@ -595,23 +656,36 @@ eeprom_failed: power_supply_unregister(&olpc_bat); battery_failed: power_supply_unregister(&olpc_ac); -ac_failed: - platform_device_unregister(bat_pdev); -success: return ret; } -static void __exit olpc_bat_exit(void) +static int olpc_battery_remove(struct platform_device *pdev) { device_remove_file(olpc_bat.dev, &olpc_bat_error); device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); - platform_device_unregister(bat_pdev); + return 0; } -module_init(olpc_bat_init); -module_exit(olpc_bat_exit); +static const struct of_device_id olpc_battery_ids[] = { + { .compatible = "olpc,xo1-battery" }, + {} +}; +MODULE_DEVICE_TABLE(of, olpc_battery_ids); + +static struct platform_driver olpc_battery_driver = { + .driver = { + .name = "olpc-battery", + .owner = THIS_MODULE, + .of_match_table = olpc_battery_ids, + }, + .probe = olpc_battery_probe, + .remove = olpc_battery_remove, + .suspend = olpc_battery_suspend, +}; + +module_platform_driver(olpc_battery_driver); MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); MODULE_LICENSE("GPL"); |
