1 files changed, 414 insertions, 0 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
new file mode 100644
index 00000000000..0042ccb46b9
--- /dev/null
+++ b/drivers/pinctrl/Kconfig
@@ -0,0 +1,414 @@
+#
+# PINCTRL infrastructure and drivers
+#
+
+config PINCTRL
+	bool
+
+if PINCTRL
+
+menu "Pin controllers"
+	depends on PINCTRL
+
+config PINMUX
+	bool "Support pin multiplexing controllers"
+
+config PINCONF
+	bool "Support pin configuration controllers"
+
+config GENERIC_PINCONF
+	bool
+	select PINCONF
+
+config DEBUG_PINCTRL
+	bool "Debug PINCTRL calls"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
+
+config PINCTRL_ABX500
+	bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions"
+	depends on AB8500_CORE
+	select GENERIC_PINCONF
+	help
+	  Select this to enable the ABx500 family IC GPIO driver
+
+config PINCTRL_AB8500
+	bool "AB8500 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8540
+	bool "AB8540 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB9540
+	bool "AB9540 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_AB8505
+	bool "AB8505 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
+config PINCTRL_ADI2
+	bool "ADI pin controller driver"
+	depends on BLACKFIN
+	select PINMUX
+	select IRQ_DOMAIN
+	help
+	  This is the pin controller and gpio driver for ADI BF54x, BF60x and
+	  future processors. This option is selected automatically when specific
+	  machine and arch are selected to build.
+
+config PINCTRL_AS3722
+	bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
+	depends on MFD_AS3722 && GPIOLIB
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  AS3722 device supports the configuration of GPIO pins for different
+	  functionality. This driver supports the pinmux, push-pull and
+	  open drain configuration for the GPIO pins of AS3722 devices. It also
+	  supports the GPIO functionality through gpiolib.
+
+config PINCTRL_BF54x
+	def_bool y if BF54x
+	select PINCTRL_ADI2
+
+config PINCTRL_BF60x
+	def_bool y if BF60x
+	select PINCTRL_ADI2
+
+config PINCTRL_AT91
+	bool "AT91 pinctrl driver"
+	depends on OF
+	depends on ARCH_AT91
+	select PINMUX
+	select PINCONF
+	select GPIOLIB
+	select OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to enable the at91 pinctrl driver
+
+config PINCTRL_BAYTRAIL
+	bool "Intel Baytrail GPIO pin control"
+	depends on GPIOLIB && ACPI && X86
+	select IRQ_DOMAIN
+	help
+	  driver for memory mapped GPIO functionality on Intel Baytrail
+	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
+	  Most pins are usually muxed to some other functionality by firmware,
+	  so only a small amount is available for gpio use.
+
+	  Requires ACPI device enumeration code to set up a platform device.
+
+config PINCTRL_BCM2835
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
+	depends on OF
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select REGMAP_MMIO
+	help
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
+	  framework.  GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_IMX
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_IMX1_CORE
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_IMX27
+	bool "IMX27 pinctrl driver"
+	depends on SOC_IMX27
+	select PINCTRL_IMX1_CORE
+	help
+	  Say Y here to enable the imx27 pinctrl driver
+
+
+config PINCTRL_IMX25
+        bool "IMX25 pinctrl driver"
+        depends on OF
+        depends on SOC_IMX25
+        select PINCTRL_IMX
+        help
+          Say Y here to enable the imx25 pinctrl driver
+
+config PINCTRL_IMX35
+	bool "IMX35 pinctrl driver"
+	depends on SOC_IMX35
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx35 pinctrl driver
+
+config PINCTRL_IMX50
+	bool "IMX50 pinctrl driver"
+	depends on SOC_IMX50
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx50 pinctrl driver
+
+config PINCTRL_IMX51
+	bool "IMX51 pinctrl driver"
+	depends on SOC_IMX51
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx51 pinctrl driver
+
+config PINCTRL_IMX53
+	bool "IMX53 pinctrl driver"
+	depends on SOC_IMX53
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx53 pinctrl driver
+
+config PINCTRL_IMX6Q
+	bool "IMX6Q/DL pinctrl driver"
+	depends on SOC_IMX6Q
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6q/dl pinctrl driver
+
+config PINCTRL_IMX6SL
+	bool "IMX6SL pinctrl driver"
+	depends on SOC_IMX6SL
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6sl pinctrl driver
+
+config PINCTRL_IMX6SX
+	bool "IMX6SX pinctrl driver"
+	depends on SOC_IMX6SX
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6sx pinctrl driver
+
+config PINCTRL_VF610
+	bool "Freescale Vybrid VF610 pinctrl driver"
+	depends on SOC_VF610
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
+
+config PINCTRL_LANTIQ
+	bool
+	depends on LANTIQ
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_FALCON
+	bool
+	depends on SOC_FALCON
+	depends on PINCTRL_LANTIQ
+
+config PINCTRL_MXS
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_IMX23
+	bool
+	select PINCTRL_MXS
+
+config PINCTRL_IMX28
+	bool
+	select PINCTRL_MXS
+
+config PINCTRL_MSM
+	bool
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_APQ8064
+	tristate "Qualcomm APQ8064 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm TLMM block found in the Qualcomm APQ8064 platform.
+
+config PINCTRL_IPQ8064
+	tristate "Qualcomm IPQ8064 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
+
+config PINCTRL_MSM8X74
+	tristate "Qualcomm 8x74 pin controller driver"
+	depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST)
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm TLMM block found in the Qualcomm 8974 platform.
+
+config PINCTRL_NOMADIK
+	bool "Nomadik pin controller driver"
+	depends on ARCH_U8500 || ARCH_NOMADIK
+	select PINMUX
+	select PINCONF
+	select GPIOLIB
+	select OF_GPIO
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_STN8815
+	bool "STN8815 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_NOMADIK
+
+config PINCTRL_DB8500
+	bool "DB8500 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
+config PINCTRL_DB8540
+	bool "DB8540 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
+config PINCTRL_ROCKCHIP
+	bool
+	select PINMUX
+	select GENERIC_PINCONF
+	select GENERIC_IRQ_CHIP
+	select MFD_SYSCON
+
+config PINCTRL_SINGLE
+	tristate "One-register-per-pin type device tree based pinctrl driver"
+	depends on OF
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	help
+	  This selects the device tree based generic pinctrl driver.
+
+config PINCTRL_SIRF
+	bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
+	depends on ARCH_SIRF
+	select PINMUX
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_ST
+	bool
+	depends on OF
+	select PINMUX
+	select PINCONF
+	select GPIOLIB_IRQCHIP
+
+config PINCTRL_TEGRA
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_TEGRA20
+	bool
+	select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA30
+	bool
+	select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA114
+	bool
+	select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA124
+	bool
+	select PINCTRL_TEGRA
+
+config PINCTRL_TZ1090
+	bool "Toumaz Xenif TZ1090 pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select GENERIC_PINCONF
+
+config PINCTRL_TZ1090_PDC
+	bool "Toumaz Xenif TZ1090 PDC pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_U300
+	bool "U300 pin controller driver"
+	depends on ARCH_U300
+	select PINMUX
+	select GENERIC_PINCONF
+
+config PINCTRL_COH901
+	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support GPIO interface on ST-Ericsson U300.
+	  The names of the two IP block variants supported are
+	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+	  ports of 8 GPIO pins each.
+
+config PINCTRL_SAMSUNG
+	bool
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_EXYNOS
+	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
+	depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
+	select PINCTRL_SAMSUNG
+
+config PINCTRL_EXYNOS5440
+	bool "Samsung EXYNOS5440 SoC pinctrl driver"
+	depends on SOC_EXYNOS5440
+	select PINMUX
+	select PINCONF
+
+config PINCTRL_PALMAS
+	bool "Pinctrl driver for the PALMAS Series MFD devices"
+	depends on OF && MFD_PALMAS
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  Palmas device supports the configuration of pins for different
+	  functionality. This driver supports the pinmux, push-pull and
+	  open drain configuration for the Palmas series devices like
+	  TPS65913, TPS80036 etc.
+
+config PINCTRL_S3C24XX
+	bool "Samsung S3C24XX SoC pinctrl driver"
+	depends on ARCH_S3C24XX
+	select PINCTRL_SAMSUNG
+
+config PINCTRL_S3C64XX
+	bool "Samsung S3C64XX SoC pinctrl driver"
+	depends on ARCH_S3C64XX
+	select PINCTRL_SAMSUNG
+
+source "drivers/pinctrl/berlin/Kconfig"
+source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/sh-pfc/Kconfig"
+source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/sunxi/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
+
+config PINCTRL_XWAY
+	bool
+	depends on SOC_TYPE_XWAY
+	depends on PINCTRL_LANTIQ
+
+config PINCTRL_TB10X
+	bool
+	depends on ARC_PLAT_TB10X
+
+endmenu
+
+endif