diff options
Diffstat (limited to 'drivers/pinctrl/Kconfig')
| -rw-r--r-- | drivers/pinctrl/Kconfig | 328 |
1 files changed, 299 insertions, 29 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index c6e6ae0aa3b..0042ccb46b9 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,14 +26,142 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_ABX500 + bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" + depends on AB8500_CORE + select GENERIC_PINCONF + help + Select this to enable the ABx500 family IC GPIO driver + +config PINCTRL_AB8500 + bool "AB8500 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8540 + bool "AB8540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB9540 + bool "AB9540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8505 + bool "AB8505 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_ADI2 + bool "ADI pin controller driver" + depends on BLACKFIN + select PINMUX + select IRQ_DOMAIN + help + This is the pin controller and gpio driver for ADI BF54x, BF60x and + future processors. This option is selected automatically when specific + machine and arch are selected to build. + +config PINCTRL_AS3722 + bool "Pinctrl and GPIO driver for ams AS3722 PMIC" + depends on MFD_AS3722 && GPIOLIB + select PINMUX + select GENERIC_PINCONF + help + AS3722 device supports the configuration of GPIO pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the GPIO pins of AS3722 devices. It also + supports the GPIO functionality through gpiolib. + +config PINCTRL_BF54x + def_bool y if BF54x + select PINCTRL_ADI2 + +config PINCTRL_BF60x + def_bool y if BF60x + select PINCTRL_ADI2 + +config PINCTRL_AT91 + bool "AT91 pinctrl driver" + depends on OF + depends on ARCH_AT91 + select PINMUX + select PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP + help + Say Y here to enable the at91 pinctrl driver + +config PINCTRL_BAYTRAIL + bool "Intel Baytrail GPIO pin control" + depends on GPIOLIB && ACPI && X86 + select IRQ_DOMAIN + help + driver for memory mapped GPIO functionality on Intel Baytrail + platforms. Supports 3 banks with 102, 28 and 44 gpios. + Most pins are usually muxed to some other functionality by firmware, + so only a small amount is available for gpio use. + + Requires ACPI device enumeration code to set up a platform device. + +config PINCTRL_BCM2835 + bool + select PINMUX + select PINCONF + +config PINCTRL_BCM281XX + bool "Broadcom BCM281xx pinctrl driver" + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + select REGMAP_MMIO + help + Say Y here to support Broadcom BCM281xx pinctrl driver, which is used + for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, + BCM28145, and BCM28155 SoCs. This driver requires the pinctrl + framework. GPIO is provided by a separate GPIO driver. + config PINCTRL_IMX bool select PINMUX select PINCONF +config PINCTRL_IMX1_CORE + bool + select PINMUX + select PINCONF + +config PINCTRL_IMX27 + bool "IMX27 pinctrl driver" + depends on SOC_IMX27 + select PINCTRL_IMX1_CORE + help + Say Y here to enable the imx27 pinctrl driver + + +config PINCTRL_IMX25 + bool "IMX25 pinctrl driver" + depends on OF + depends on SOC_IMX25 + select PINCTRL_IMX + help + Say Y here to enable the imx25 pinctrl driver + +config PINCTRL_IMX35 + bool "IMX35 pinctrl driver" + depends on SOC_IMX35 + select PINCTRL_IMX + help + Say Y here to enable the imx35 pinctrl driver + +config PINCTRL_IMX50 + bool "IMX50 pinctrl driver" + depends on SOC_IMX50 + select PINCTRL_IMX + help + Say Y here to enable the imx50 pinctrl driver + config PINCTRL_IMX51 bool "IMX51 pinctrl driver" - depends on OF depends on SOC_IMX51 select PINCTRL_IMX help @@ -41,86 +169,176 @@ config PINCTRL_IMX51 config PINCTRL_IMX53 bool "IMX53 pinctrl driver" - depends on OF depends on SOC_IMX53 select PINCTRL_IMX help Say Y here to enable the imx53 pinctrl driver config PINCTRL_IMX6Q - bool "IMX6Q pinctrl driver" - depends on OF + bool "IMX6Q/DL pinctrl driver" depends on SOC_IMX6Q select PINCTRL_IMX help - Say Y here to enable the imx6q pinctrl driver + Say Y here to enable the imx6q/dl pinctrl driver + +config PINCTRL_IMX6SL + bool "IMX6SL pinctrl driver" + depends on SOC_IMX6SL + select PINCTRL_IMX + help + Say Y here to enable the imx6sl pinctrl driver + +config PINCTRL_IMX6SX + bool "IMX6SX pinctrl driver" + depends on SOC_IMX6SX + select PINCTRL_IMX + help + Say Y here to enable the imx6sx pinctrl driver + +config PINCTRL_VF610 + bool "Freescale Vybrid VF610 pinctrl driver" + depends on SOC_VF610 + select PINCTRL_IMX + help + Say Y here to enable the Freescale Vybrid VF610 pinctrl driver -config PINCTRL_PXA3xx +config PINCTRL_LANTIQ bool + depends on LANTIQ select PINMUX - -config PINCTRL_MMP2 - bool "MMP2 pin controller driver" - depends on ARCH_MMP - select PINCTRL_PXA3xx select PINCONF -config PINCTRL_MXS +config PINCTRL_FALCON bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ -config PINCTRL_IMX23 +config PINCTRL_MXS bool select PINMUX select PINCONF + +config PINCTRL_IMX23 + bool select PINCTRL_MXS config PINCTRL_IMX28 bool + select PINCTRL_MXS + +config PINCTRL_MSM + bool select PINMUX select PINCONF - select PINCTRL_MXS + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + +config PINCTRL_APQ8064 + tristate "Qualcomm APQ8064 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm TLMM block found in the Qualcomm APQ8064 platform. + +config PINCTRL_IPQ8064 + tristate "Qualcomm IPQ8064 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm TLMM block found in the Qualcomm IPQ8064 platform. + +config PINCTRL_MSM8X74 + tristate "Qualcomm 8x74 pin controller driver" + depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST) + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm TLMM block found in the Qualcomm 8974 platform. config PINCTRL_NOMADIK bool "Nomadik pin controller driver" depends on ARCH_U8500 || ARCH_NOMADIK select PINMUX select PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP + +config PINCTRL_STN8815 + bool "STN8815 pin controller driver" + depends on PINCTRL_NOMADIK && ARCH_NOMADIK config PINCTRL_DB8500 bool "DB8500 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_U8500 -config PINCTRL_PXA168 - bool "PXA168 pin controller driver" - depends on ARCH_MMP - select PINCTRL_PXA3xx - select PINCONF +config PINCTRL_DB8540 + bool "DB8540 pin controller driver" + depends on PINCTRL_NOMADIK && ARCH_U8500 + +config PINCTRL_ROCKCHIP + bool + select PINMUX + select GENERIC_PINCONF + select GENERIC_IRQ_CHIP + select MFD_SYSCON -config PINCTRL_PXA910 - bool "PXA910 pin controller driver" - depends on ARCH_MMP - select PINCTRL_PXA3xx +config PINCTRL_SINGLE + tristate "One-register-per-pin type device tree based pinctrl driver" + depends on OF + select PINMUX select PINCONF + select GENERIC_PINCONF + help + This selects the device tree based generic pinctrl driver. config PINCTRL_SIRF - bool "CSR SiRFprimaII pin controller driver" - depends on ARCH_PRIMA2 + bool "CSR SiRFprimaII/SiRFmarco pin controller driver" + depends on ARCH_SIRF select PINMUX + select GPIOLIB_IRQCHIP -config PINCTRL_TEGRA +config PINCTRL_ST bool + depends on OF + select PINMUX + select PINCONF + select GPIOLIB_IRQCHIP -config PINCTRL_TEGRA20 +config PINCTRL_TEGRA bool select PINMUX select PINCONF + +config PINCTRL_TEGRA20 + bool select PINCTRL_TEGRA config PINCTRL_TEGRA30 bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA114 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA124 + bool + select PINCTRL_TEGRA + +config PINCTRL_TZ1090 + bool "Toumaz Xenif TZ1090 pin control driver" + depends on SOC_TZ1090 + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_TZ1090_PDC + bool "Toumaz Xenif TZ1090 PDC pin control driver" + depends on SOC_TZ1090 select PINMUX select PINCONF - select PINCTRL_TEGRA config PINCTRL_U300 bool "U300 pin controller driver" @@ -130,14 +348,66 @@ config PINCTRL_U300 config PINCTRL_COH901 bool "ST-Ericsson U300 COH 901 335/571 GPIO" - depends on GPIOLIB && ARCH_U300 && PINMUX_U300 + depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 + select GPIOLIB_IRQCHIP help Say yes here to support GPIO interface on ST-Ericsson U300. The names of the two IP block variants supported are COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 ports of 8 GPIO pins each. +config PINCTRL_SAMSUNG + bool + select PINMUX + select PINCONF + +config PINCTRL_EXYNOS + bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440" + depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210) + select PINCTRL_SAMSUNG + +config PINCTRL_EXYNOS5440 + bool "Samsung EXYNOS5440 SoC pinctrl driver" + depends on SOC_EXYNOS5440 + select PINMUX + select PINCONF + +config PINCTRL_PALMAS + bool "Pinctrl driver for the PALMAS Series MFD devices" + depends on OF && MFD_PALMAS + select PINMUX + select GENERIC_PINCONF + help + Palmas device supports the configuration of pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the Palmas series devices like + TPS65913, TPS80036 etc. + +config PINCTRL_S3C24XX + bool "Samsung S3C24XX SoC pinctrl driver" + depends on ARCH_S3C24XX + select PINCTRL_SAMSUNG + +config PINCTRL_S3C64XX + bool "Samsung S3C64XX SoC pinctrl driver" + depends on ARCH_S3C64XX + select PINCTRL_SAMSUNG + +source "drivers/pinctrl/berlin/Kconfig" +source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/sunxi/Kconfig" +source "drivers/pinctrl/vt8500/Kconfig" + +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + +config PINCTRL_TB10X + bool + depends on ARC_PLAT_TB10X endmenu |