diff options
Diffstat (limited to 'drivers/pci/quirks.c')
| -rw-r--r-- | drivers/pci/quirks.c | 2719 |
1 files changed, 2285 insertions, 434 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e887aa45c9c..d0f69269eb6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -9,33 +9,49 @@ * * Init/reset quirks for USB host controllers should be in the * USB quirks file, where their drivers can access reuse it. - * - * The bridge optimization stuff has been removed. If you really - * have a silly BIOS which is unable to set your host bridge right, - * use the PowerTweak utility (see http://powertweak.sourceforge.net). */ #include <linux/types.h> #include <linux/kernel.h> +#include <linux/export.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/acpi.h> #include <linux/kallsyms.h> +#include <linux/dmi.h> +#include <linux/pci-aspm.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/ktime.h> +#include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" +/* + * Decoding should be disabled for a PCI device during BAR sizing to avoid + * conflict. But doing so may cause problems on host bridge and perhaps other + * key system devices. For devices that need to have mmio decoding always-on, + * we need to set the dev->mmio_always_on bit. + */ +static void quirk_mmio_always_on(struct pci_dev *dev) +{ + dev->mmio_always_on = 1; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); + /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. */ -static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) +static void quirk_mellanox_tavor(struct pci_dev *dev) { dev->broken_parity_status = 1; /* This device gives false positives */ } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); -/* Deal with broken BIOS'es that neglect to enable passive release, +/* Deal with broken BIOSes that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ static void quirk_passive_release(struct pci_dev *dev) { @@ -47,7 +63,7 @@ static void quirk_passive_release(struct pci_dev *dev) while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { pci_read_config_byte(d, 0x82, &dlc); if (!(dlc & 1<<1)) { - dev_err(&d->dev, "PIIX3: Enabling Passive Release\n"); + dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); dlc |= 1<<1; pci_write_config_byte(d, 0x82, dlc); } @@ -58,17 +74,15 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_p /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround but VIA don't answer queries. If you happen to have good contacts at VIA - ask them for me please -- Alan - - This appears to be BIOS not version dependent. So presumably there is a + ask them for me please -- Alan + + This appears to be BIOS not version dependent. So presumably there is a chipset level fix */ -int isa_dma_bridge_buggy; -EXPORT_SYMBOL(isa_dma_bridge_buggy); - -static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) + +static void quirk_isa_dma_hangs(struct pci_dev *dev) { if (!isa_dma_bridge_buggy) { - isa_dma_bridge_buggy=1; + isa_dma_bridge_buggy = 1; dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); } } @@ -79,20 +93,37 @@ static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); -int pci_pci_problems; -EXPORT_SYMBOL(pci_pci_problems); +/* + * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear + * for some HT machines to use C4 w/o hanging. + */ +static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) +{ + u32 pmbase; + u16 pm1a; + + pci_read_config_dword(dev, 0x40, &pmbase); + pmbase = pmbase & 0xff80; + pm1a = inw(pmbase); + + if (pm1a & 0x10) { + dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); + outw(0x10, pmbase); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); /* * Chipsets where PCI->PCI transfers vanish or hang */ -static void __devinit quirk_nopcipci(struct pci_dev *dev) +static void quirk_nopcipci(struct pci_dev *dev) { - if ((pci_pci_problems & PCIPCI_FAIL)==0) { + if ((pci_pci_problems & PCIPCI_FAIL) == 0) { dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_FAIL; } @@ -100,7 +131,7 @@ static void __devinit quirk_nopcipci(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); -static void __devinit quirk_nopciamd(struct pci_dev *dev) +static void quirk_nopciamd(struct pci_dev *dev) { u8 rev; pci_read_config_byte(dev, 0x08, &rev); @@ -115,27 +146,28 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopci /* * Triton requires workarounds to be used by the drivers */ -static void __devinit quirk_triton(struct pci_dev *dev) +static void quirk_triton(struct pci_dev *dev) { - if ((pci_pci_problems&PCIPCI_TRITON)==0) { + if ((pci_pci_problems&PCIPCI_TRITON) == 0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_TRITON; } } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); /* * VIA Apollo KT133 needs PCI latency patch * Made according to a windows driver based patch by George E. Breese * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm - * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for - * the info on which Mr Breese based his work. + * and http://www.georgebreese.com/net/software/#PCI + * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for + * the info on which Mr Breese based his work. * * Updated based on further information from the site and also on - * information provided by VIA + * information provided by VIA */ static void quirk_vialatency(struct pci_dev *dev) { @@ -143,37 +175,37 @@ static void quirk_vialatency(struct pci_dev *dev) u8 busarb; /* Ok we have a potential problem chipset here. Now see if we have a buggy southbridge */ - + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); - if (p!=NULL) { + if (p != NULL) { /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ /* Check for buggy part revisions */ if (p->revision < 0x40 || p->revision > 0x42) goto exit; } else { p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); - if (p==NULL) /* No problem parts */ + if (p == NULL) /* No problem parts */ goto exit; /* Check for buggy part revisions */ if (p->revision < 0x10 || p->revision > 0x12) goto exit; } - + /* - * Ok we have the problem. Now set the PCI master grant to + * Ok we have the problem. Now set the PCI master grant to * occur every master grant. The apparent bug is that under high * PCI load (quite common in Linux of course) you can get data * loss when the CPU is held off the bus for 3 bus master requests * This happens to include the IDE controllers.... * * VIA only apply this fix when an SB Live! is present but under - * both Linux and Windows this isnt enough, and we have seen + * both Linux and Windows this isn't enough, and we have seen * corruption without SB Live! but with things like 3 UDMA IDE * controllers. So we ignore that bit of the VIA recommendation.. */ pci_read_config_byte(dev, 0x76, &busarb); - /* Set bit 4 and bi 5 of byte 76 to 0x01 + /* Set bit 4 and bi 5 of byte 76 to 0x01 "Master priority rotation on every PCI master grant */ busarb &= ~(1<<5); busarb |= (1<<4); @@ -193,18 +225,18 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_viala /* * VIA Apollo VP3 needs ETBF on BT848/878 */ -static void __devinit quirk_viaetbf(struct pci_dev *dev) +static void quirk_viaetbf(struct pci_dev *dev) { - if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { + if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_VIAETBF; } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); -static void __devinit quirk_vsfx(struct pci_dev *dev) +static void quirk_vsfx(struct pci_dev *dev) { - if ((pci_pci_problems&PCIPCI_VSFX)==0) { + if ((pci_pci_problems&PCIPCI_VSFX) == 0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_VSFX; } @@ -216,40 +248,40 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx) * that DMA to AGP space. Latency must be set to 0xA and triton * workaround applied too * [Info kindly provided by ALi] - */ -static void __init quirk_alimagik(struct pci_dev *dev) + */ +static void quirk_alimagik(struct pci_dev *dev) { - if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { + if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; } } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); /* * Natoma has some interesting boundary conditions with Zoran stuff * at least */ -static void __devinit quirk_natoma(struct pci_dev *dev) +static void quirk_natoma(struct pci_dev *dev) { - if ((pci_pci_problems&PCIPCI_NATOMA)==0) { + if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); pci_pci_problems |= PCIPCI_NATOMA; } } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); /* * This chip can cause PCI parity errors if config register 0xA0 is read * while DMAs are occurring. */ -static void __devinit quirk_citrine(struct pci_dev *dev) +static void quirk_citrine(struct pci_dev *dev) { dev->cfg_size = 0xA0; } @@ -259,11 +291,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_cit * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. * If it's needed, re-allocate the region. */ -static void __devinit quirk_s3_64M(struct pci_dev *dev) +static void quirk_s3_64M(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { + r->flags |= IORESOURCE_UNSET; r->start = 0; r->end = 0x3ffffff; } @@ -271,34 +304,52 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); -static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, - unsigned size, int nr, const char *name) +/* + * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS + * ver. 1.33 20070103) don't set the correct ISA PCI region header info. + * BAR0 should be 8 bytes; instead, it may be set to something like 8k + * (which conflicts w/ BAR1's memory range). + */ +static void quirk_cs5536_vsa(struct pci_dev *dev) { - region &= ~(size-1); - if (region) { - struct pci_bus_region bus_region; - struct resource *res = dev->resource + nr; + if (pci_resource_len(dev, 0) != 8) { + struct resource *res = &dev->resource[0]; + res->end = res->start + 8 - 1; + dev_info(&dev->dev, "CS5536 ISA bridge bug detected (incorrect header); workaround applied\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); - res->name = pci_name(dev); - res->start = region; - res->end = region + size - 1; - res->flags = IORESOURCE_IO; +static void quirk_io_region(struct pci_dev *dev, int port, + unsigned size, int nr, const char *name) +{ + u16 region; + struct pci_bus_region bus_region; + struct resource *res = dev->resource + nr; - /* Convert from PCI bus to resource space. */ - bus_region.start = res->start; - bus_region.end = res->end; - pcibios_bus_to_resource(dev, res, &bus_region); + pci_read_config_word(dev, port, ®ion); + region &= ~(size - 1); - pci_claim_resource(dev, nr); - dev_info(&dev->dev, "quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name); - } -} + if (!region) + return; + + res->name = pci_name(dev); + res->flags = IORESOURCE_IO; + + /* Convert from PCI bus to resource space */ + bus_region.start = region; + bus_region.end = region + size - 1; + pcibios_bus_to_resource(dev->bus, res, &bus_region); + + if (!pci_claim_resource(dev, nr)) + dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); +} /* * ATI Northbridge setups MCE the processor if you even * read somewhere between 0x3b0->0x3bb or read 0x3d3 */ -static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) +static void quirk_ati_exploding_mce(struct pci_dev *dev) { dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ @@ -318,14 +369,10 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_ * 0xE0 (64 bytes of ACPI registers) * 0xE2 (32 bytes of SMB registers) */ -static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) +static void quirk_ali7101_acpi(struct pci_dev *dev) { - u16 region; - - pci_read_config_word(dev, 0xE0, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); - pci_read_config_word(dev, 0xE2, ®ion); - quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); + quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); + quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); @@ -349,10 +396,11 @@ static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int p /* * For now we only print it out. Eventually we'll want to * reserve it (at least if it's in the 0x1000+ range), but - * let's get enough confirmation reports first. + * let's get enough confirmation reports first. */ base &= -size; - dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); + dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, + base + size - 1); } static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) @@ -374,10 +422,11 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int } /* * For now we only print it out. Eventually we'll want to - * reserve it, but let's get enough confirmation reports first. + * reserve it, but let's get enough confirmation reports first. */ base &= -size; - dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); + dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, + base + size - 1); } /* @@ -386,14 +435,12 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int * 0x90 (16 bytes of SMB registers) * and a few strange programmable PIIX4 device resources. */ -static void __devinit quirk_piix4_acpi(struct pci_dev *dev) +static void quirk_piix4_acpi(struct pci_dev *dev) { - u32 region, res_a; + u32 res_a; - pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); - pci_read_config_dword(dev, 0x90, ®ion); - quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); + quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); + quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); /* Device resource A has enables for some of the other ones */ pci_read_config_dword(dev, 0x5c, &res_a); @@ -419,20 +466,43 @@ static void __devinit quirk_piix4_acpi(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); +#define ICH_PMBASE 0x40 +#define ICH_ACPI_CNTL 0x44 +#define ICH4_ACPI_EN 0x10 +#define ICH6_ACPI_EN 0x80 +#define ICH4_GPIOBASE 0x58 +#define ICH4_GPIO_CNTL 0x5c +#define ICH4_GPIO_EN 0x10 +#define ICH6_GPIOBASE 0x48 +#define ICH6_GPIO_CNTL 0x4c +#define ICH6_GPIO_EN 0x10 + /* * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at * 0x40 (128 bytes of ACPI, GPIO & TCO registers) * 0x58 (64 bytes of GPIO I/O space) */ -static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) +static void quirk_ich4_lpc_acpi(struct pci_dev *dev) { - u32 region; + u8 enable; - pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); - - pci_read_config_dword(dev, 0x58, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); + /* + * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict + * with low legacy (and fixed) ports. We don't know the decoding + * priority and can't tell whether the legacy device or the one created + * here is really at that address. This happens on boards with broken + * BIOSes. + */ + + pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); + if (enable & ICH4_ACPI_EN) + quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, + "ICH4 ACPI/GPIO/TCO"); + + pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); + if (enable & ICH4_GPIO_EN) + quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, + "ICH4 GPIO"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); @@ -445,44 +515,119 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); -static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) +static void ich6_lpc_acpi_gpio(struct pci_dev *dev) +{ + u8 enable; + + pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); + if (enable & ICH6_ACPI_EN) + quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, + "ICH6 ACPI/GPIO/TCO"); + + pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); + if (enable & ICH6_GPIO_EN) + quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, + "ICH6 GPIO"); +} + +static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) { - u32 region; + u32 val; + u32 size, base; - pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); + pci_read_config_dword(dev, reg, &val); - pci_read_config_dword(dev, 0x48, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); + /* Enabled? */ + if (!(val & 1)) + return; + base = val & 0xfffc; + if (dynsize) { + /* + * This is not correct. It is 16, 32 or 64 bytes depending on + * register D31:F0:ADh bits 5:4. + * + * But this gets us at least _part_ of it. + */ + size = 16; + } else { + size = 128; + } + base &= ~(size-1); + + /* Just print it out for now. We should reserve it after more debugging */ + dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich6_lpc_acpi); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich6_lpc_acpi); + +static void quirk_ich6_lpc(struct pci_dev *dev) +{ + /* Shared ACPI/GPIO decode with all ICH6+ */ + ich6_lpc_acpi_gpio(dev); + + /* ICH6-specific generic IO decode */ + ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); + ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); + +static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) +{ + u32 val; + u32 mask, base; + + pci_read_config_dword(dev, reg, &val); + + /* Enabled? */ + if (!(val & 1)) + return; + + /* + * IO base in bits 15:2, mask in bits 23:18, both + * are dword-based + */ + base = val & 0xfffc; + mask = (val >> 16) & 0xfc; + mask |= 3; + + /* Just print it out for now. We should reserve it after more debugging */ + dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); +} + +/* ICH7-10 has the same common LPC generic IO decode registers */ +static void quirk_ich7_lpc(struct pci_dev *dev) +{ + /* We share the common ACPI/GPIO decode with ICH6 */ + ich6_lpc_acpi_gpio(dev); + + /* And have 4 ICH7+ generic decodes */ + ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); + ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); + ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); + ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); /* * VIA ACPI: One IO region pointed to by longword at * 0x48 or 0x20 (256 bytes of ACPI registers) */ -static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) +static void quirk_vt82c586_acpi(struct pci_dev *dev) { - u32 region; - - if (dev->revision & 0x10) { - pci_read_config_dword(dev, 0x48, ®ion); - region &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); - } + if (dev->revision & 0x10) + quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, + "vt82c586 ACPI"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); @@ -492,20 +637,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt * 0x70 (128 bytes of hardware monitoring register) * 0x90 (16 bytes of SMB registers) */ -static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) +static void quirk_vt82c686_acpi(struct pci_dev *dev) { - u16 hm; - u32 smb; - quirk_vt82c586_acpi(dev); - pci_read_config_word(dev, 0x70, &hm); - hm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon"); + quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, + "vt82c686 HW-mon"); - pci_read_config_dword(dev, 0x90, &smb); - smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB"); + quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); @@ -514,22 +653,33 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt * 0x88 (128 bytes of power management registers) * 0xd0 (16 bytes of SMB registers) */ -static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) +static void quirk_vt8235_acpi(struct pci_dev *dev) { - u16 pm, smb; - - pci_read_config_word(dev, 0x88, &pm); - pm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); - - pci_read_config_word(dev, 0xd0, &smb); - smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); + quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); + quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); +/* + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: + * Disable fast back-to-back on the secondary bus segment + */ +static void quirk_xio2000a(struct pci_dev *dev) +{ + struct pci_dev *pdev; + u16 command; + + dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); + list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { + pci_read_config_word(pdev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_FAST_BACK) + pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, + quirk_xio2000a); -#ifdef CONFIG_X86_IO_APIC +#ifdef CONFIG_X86_IO_APIC #include <asm/io_apic.h> @@ -543,23 +693,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235 static void quirk_via_ioapic(struct pci_dev *dev) { u8 tmp; - + if (nr_ioapics < 1) tmp = 0; /* nothing routed to external APIC */ else tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ - + dev_info(&dev->dev, "%sbling VIA external APIC routing\n", tmp == 0 ? "Disa" : "Ena"); /* Offset 0x58: External APIC IRQ output control */ - pci_write_config_byte (dev, 0x58, tmp); + pci_write_config_byte(dev, 0x58, tmp); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); /* - * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit. + * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. * This leads to doubled level interrupt rates. * Set this bit to get rid of cycle wastage. * Otherwise uncritical. @@ -576,7 +726,7 @@ static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); /* * The AMD io apic can hang the box when an apic irq is masked. @@ -587,7 +737,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_v * noapic specified. For the moment we assume it's the erratum. We may be wrong * of course. However the advice is demonstrably good even if so.. */ -static void __devinit quirk_amd_ioapic(struct pci_dev *dev) +static void quirk_amd_ioapic(struct pci_dev *dev) { if (dev->revision >= 0x02) { dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); @@ -596,44 +746,23 @@ static void __devinit quirk_amd_ioapic(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); -static void __init quirk_ioapic_rmw(struct pci_dev *dev) +static void quirk_ioapic_rmw(struct pci_dev *dev) { if (dev->devfn == 0 && dev->bus->number == 0) sis_apic_bug = 1; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); - -#define AMD8131_revA0 0x01 -#define AMD8131_revB0 0x11 -#define AMD8131_MISC 0x40 -#define AMD8131_NIOAMODE_BIT 0 -static void quirk_amd_8131_ioapic(struct pci_dev *dev) -{ - unsigned char tmp; - - if (nr_ioapics == 0) - return; - - if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) { - dev_info(&dev->dev, "Fixing up AMD8131 IOAPIC mode\n"); - pci_read_config_byte( dev, AMD8131_MISC, &tmp); - tmp &= ~(1 << AMD8131_NIOAMODE_BIT); - pci_write_config_byte( dev, AMD8131_MISC, tmp); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); #endif /* CONFIG_X86_IO_APIC */ /* * Some settings of MMRBC can lead to data corruption so block changes. * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide */ -static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev) +static void quirk_amd_8131_mmrbc(struct pci_dev *dev) { if (dev->subordinate && dev->revision <= 0x12) { - dev_info(&dev->dev, "AMD8131 rev %x detected; " - "disabling PCI-X MMRBC\n", dev->revision); + dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", + dev->revision); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; } } @@ -647,7 +776,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_ * value of the ACPI SCI interrupt is only done for convenience. * -jgarzik */ -static void __devinit quirk_via_acpi(struct pci_dev *d) +static void quirk_via_acpi(struct pci_dev *d) { /* * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 @@ -754,7 +883,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); * We need to switch it off to be able to recognize the real * type of the chip. */ -static void __devinit quirk_vt82c598_id(struct pci_dev *dev) +static void quirk_vt82c598_id(struct pci_dev *dev) { pci_write_config_byte(dev, 0xfc, 0); pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); @@ -769,12 +898,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt */ static void quirk_cardbus_legacy(struct pci_dev *dev) { - if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class) - return; pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); -DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); +DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); /* * Following the PCI ordering rules is optional on the AMD762. I'm not @@ -787,17 +916,17 @@ static void quirk_amd_ordering(struct pci_dev *dev) { u32 pcic; pci_read_config_dword(dev, 0x4C, &pcic); - if ((pcic&6)!=6) { + if ((pcic & 6) != 6) { pcic |= 6; dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); pci_write_config_dword(dev, 0x4C, pcic); pci_read_config_dword(dev, 0x84, &pcic); - pcic |= (1<<23); /* Required in this mode */ + pcic |= (1 << 23); /* Required in this mode */ pci_write_config_dword(dev, 0x84, pcic); } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); /* * DreamWorks provided workaround for Dunord I-3000 problem @@ -806,9 +935,11 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quir * assigned to it. We force a larger allocation to ensure that * nothing gets put too close to it. */ -static void __devinit quirk_dunord ( struct pci_dev * dev ) +static void quirk_dunord(struct pci_dev *dev) { - struct resource *r = &dev->resource [1]; + struct resource *r = &dev->resource[1]; + + r->flags |= IORESOURCE_UNSET; r->start = 0; r->end = 0xffffff; } @@ -820,7 +951,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 * instead of 0x01. */ -static void __devinit quirk_transparent_bridge(struct pci_dev *dev) +static void quirk_transparent_bridge(struct pci_dev *dev) { dev->transparent = 1; } @@ -830,17 +961,19 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) /* * Common misconfiguration of the MediaGX/Geode PCI master that will * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 - * datasheets found at http://www.national.com/ds/GX for info on what + * datasheets found at http://www.national.com/analog for info on what * these bits do. <christer@weinigel.se> */ static void quirk_mediagx_master(struct pci_dev *dev) { u8 reg; + pci_read_config_byte(dev, 0x41, ®); if (reg & 2) { reg &= ~2; - dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg); - pci_write_config_byte(dev, 0x41, reg); + dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", + reg); + pci_write_config_byte(dev, 0x41, reg); } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); @@ -854,7 +987,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, qu static void quirk_disable_pxb(struct pci_dev *pdev) { u16 config; - + if (pdev->revision != 0x04) /* Only C0 requires this */ return; pci_read_config_word(pdev, 0x40, &config); @@ -865,11 +998,11 @@ static void quirk_disable_pxb(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); -static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) +static void quirk_amd_ide_mode(struct pci_dev *pdev) { - /* set sb600/sb700/sb800 sata to ahci mode */ + /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ u8 tmp; pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); @@ -885,14 +1018,18 @@ static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); /* * Serverworks CSB5 IDE does not fully support native mode */ -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) +static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); @@ -908,7 +1045,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ -static void __init quirk_ide_samemode(struct pci_dev *pdev) +static void quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -923,10 +1060,31 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); +/* + * Some ATA devices break if put into D3 + */ + +static void quirk_no_ata_d3(struct pci_dev *pdev) +{ + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; +} +/* Quirk the legacy ATA devices only. The AHCI ones are ok */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +/* ALi loses some register settings that we cannot then restore */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); +/* VIA comes back fine but we need to keep it alive or ACPI GTM failures + occur when mode detecting */ +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); + /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. */ -static void __init quirk_eisa_bridge(struct pci_dev *dev) +static void quirk_eisa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_EISA << 8; } @@ -937,11 +1095,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge * is not activated. The myth is that Asus said that they do not want the * users to be irritated by just another PCI Device in the Win98 device - * manager. (see the file prog/hotplug/README.p4b in the lm_sensors + * manager. (see the file prog/hotplug/README.p4b in the lm_sensors * package 2.7.0 for details) * - * The SMBus PCI Device can be activated by setting a bit in the ICH LPC - * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it + * The SMBus PCI Device can be activated by setting a bit in the ICH LPC + * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it * becomes necessary to do this tweak in two steps -- the chosen trigger * is either the Host bridge (preferred) or on-board VGA controller. * @@ -960,11 +1118,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e */ static int asus_hides_smbus; -static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) +static void asus_hides_smbus_hostbridge(struct pci_dev *dev) { if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0x8025: /* P4B-LX */ case 0x8070: /* P4B */ case 0x8088: /* P4B533 */ @@ -972,14 +1130,14 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0x80b1: /* P4GE-V */ case 0x80b2: /* P4PE */ case 0x8093: /* P4B533-V */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0x8030: /* P4T533 */ asus_hides_smbus = 1; } @@ -997,6 +1155,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) switch (dev->subsystem_device) { case 0x1751: /* M2N notebook */ case 0x1821: /* M5N notebook */ + case 0x1897: /* A6L notebook */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) @@ -1018,7 +1177,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0x088C: /* HP Compaq nc8000 */ case 0x0890: /* HP Compaq nc6000 */ asus_hides_smbus = 1; @@ -1027,6 +1186,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) switch (dev->subsystem_device) { case 0x12bc: /* HP D330L */ case 0x12bd: /* HP D530 */ + case 0x006a: /* HP Compaq nx9500 */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) @@ -1034,26 +1194,46 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x12bf: /* HP xw4100 */ asus_hides_smbus = 1; } - } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { - if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) - switch(dev->subsystem_device) { - case 0xC00C: /* Samsung P35 notebook */ - asus_hides_smbus = 1; - } + } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { + if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) + switch (dev->subsystem_device) { + case 0xC00C: /* Samsung P35 notebook */ + asus_hides_smbus = 1; + } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0x0058: /* Compaq Evo N620c */ asus_hides_smbus = 1; } else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) - switch(dev->subsystem_device) { + switch (dev->subsystem_device) { case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ /* Motherboard doesn't have Host bridge * subvendor/subdevice IDs, therefore checking * its on-board VGA controller */ asus_hides_smbus = 1; } + else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) + switch (dev->subsystem_device) { + case 0x00b8: /* Compaq Evo D510 CMT */ + case 0x00b9: /* Compaq Evo D510 SFF */ + case 0x00ba: /* Compaq Evo D510 USDT */ + /* Motherboard doesn't have Host bridge + * subvendor/subdevice IDs and on-board VGA + * controller is disabled if an AGP card is + * inserted, therefore checking USB UHCI + * Controller #1 */ + asus_hides_smbus = 1; + } + else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) + switch (dev->subsystem_device) { + case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ + /* Motherboard doesn't have host bridge + * subvendor/subdevice IDs, therefore checking + * its on-board VGA controller */ + asus_hides_smbus = 1; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); @@ -1068,11 +1248,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); static void asus_hides_smbus_lpc(struct pci_dev *dev) { u16 val; - + if (likely(!asus_hides_smbus)) return; @@ -1081,7 +1263,8 @@ static void asus_hides_smbus_lpc(struct pci_dev *dev) pci_write_config_word(dev, 0xF2, val & (~0x8)); pci_read_config_word(dev, 0xF2, &val); if (val & 0x8) - dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val); + dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", + val); else dev_info(&dev->dev, "Enabled i801 SMBus device\n"); } @@ -1093,31 +1276,61 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); -static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +/* It appears we just have one such device. If not, we have a warning */ +static void __iomem *asus_rcba_base; +static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) { - u32 val, rcba; - void __iomem *base; + u32 rcba; if (likely(!asus_hides_smbus)) return; + WARN_ON(asus_rcba_base); + pci_read_config_dword(dev, 0xF0, &rcba); - base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */ - if (base == NULL) return; - val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */ - writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */ - iounmap(base); + /* use bits 31:14, 16 kB aligned */ + asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); + if (asus_rcba_base == NULL) + return; +} + +static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) +{ + u32 val; + + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + /* read the Function Disable register, dword mode only */ + val = readl(asus_rcba_base + 0x3418); + writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ +} + +static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) +{ + if (likely(!asus_hides_smbus || !asus_rcba_base)) + return; + iounmap(asus_rcba_base); + asus_rcba_base = NULL; dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); } + +static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +{ + asus_hides_smbus_lpc_ich6_suspend(dev); + asus_hides_smbus_lpc_ich6_resume_early(dev); + asus_hides_smbus_lpc_ich6_resume(dev); +} DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); /* * SiS 96x south bridge: BIOS typically hides SMBus device... @@ -1135,10 +1348,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); /* * ... This is further complicated by the fact that some SiS96x south @@ -1172,7 +1385,7 @@ static void quirk_sis_503(struct pci_dev *dev) quirk_sis_96x_smbus(dev); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); /* @@ -1199,13 +1412,14 @@ static void asus_hides_ac97_lpc(struct pci_dev *dev) pci_write_config_byte(dev, 0x50, val & (~0xc0)); pci_read_config_byte(dev, 0x50, &val); if (val & 0xc0) - dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val); + dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", + val); else dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) @@ -1230,7 +1444,9 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) conf5 &= ~(1 << 24); /* Clear bit 24 */ switch (pdev->device) { - case PCI_DEVICE_ID_JMICRON_JMB360: + case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ + case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ + case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ /* The controller should be in single function ahci mode */ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ break; @@ -1242,6 +1458,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) /* Fall through */ case PCI_DEVICE_ID_JMICRON_JMB361: case PCI_DEVICE_ID_JMICRON_JMB363: + case PCI_DEVICE_ID_JMICRON_JMB369: /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ /* Set the class codes correctly and then direct IDE 0 */ conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ @@ -1266,21 +1483,27 @@ static void quirk_jmicron_ata(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); #endif #ifdef CONFIG_X86_IO_APIC -static void __init quirk_alder_ioapic(struct pci_dev *pdev) +static void quirk_alder_ioapic(struct pci_dev *pdev) { int i; @@ -1295,20 +1518,16 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev) /* The next five BARs all seem to be rubbish, so just clean * them out */ - for (i=1; i < 6; i++) { + for (i = 1; i < 6; i++) memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); - } - } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); #endif -int pcie_mch_quirk; -EXPORT_SYMBOL(pcie_mch_quirk); - -static void __devinit quirk_pcie_mch(struct pci_dev *pdev) +static void quirk_pcie_mch(struct pci_dev *pdev) { - pcie_mch_quirk = 1; + pci_msi_off(pdev); + pdev->no_msi = 1; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); @@ -1319,7 +1538,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quir * It's possible for the MSI to get corrupted if shpc and acpi * are used together on certain PXH-based systems. */ -static void __devinit quirk_pcie_pxh(struct pci_dev *dev) +static void quirk_pcie_pxh(struct pci_dev *dev) { pci_msi_off(dev); dev->no_msi = 1; @@ -1335,7 +1554,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pci * Some Intel PCI Express chipsets have trouble with downstream * device power management. */ -static void quirk_intel_pcie_pm(struct pci_dev * dev) +static void quirk_intel_pcie_pm(struct pci_dev *dev) { pci_pm_d3_delay = 120; dev->no_d1d2 = 1; @@ -1363,16 +1582,170 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); +#ifdef CONFIG_X86_IO_APIC +/* + * Boot interrupts on some chipsets cannot be turned off. For these chipsets, + * remap the original interrupt in the linux kernel to the boot interrupt, so + * that a PCI device's interrupt handler is installed on the boot interrupt + * line instead. + */ +static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) +{ + if (noioapicquirk || noioapicreroute) + return; + + dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; + dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); + +/* + * On some chipsets we can disable the generation of legacy INTx boot + * interrupts. + */ + +/* + * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no + * 300641-004US, section 5.7.3. + */ +#define INTEL_6300_IOAPIC_ABAR 0x40 +#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) + +static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); + pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; + pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); + +/* + * disable boot interrupts on HT-1000 + */ +#define BC_HT1000_FEATURE_REG 0x64 +#define BC_HT1000_PIC_REGS_ENABLE (1<<0) +#define BC_HT1000_MAP_IDX 0xC00 +#define BC_HT1000_MAP_DATA 0xC01 + +static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + u8 irq; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | + BC_HT1000_PIC_REGS_ENABLE); + + for (irq = 0x10; irq < 0x10 + 32; irq++) { + outb(irq, BC_HT1000_MAP_IDX); + outb(0x00, BC_HT1000_MAP_DATA); + } + + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); + +/* + * disable boot interrupts on AMD and ATI chipsets + */ +/* + * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 + * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode + * (due to an erratum). + */ +#define AMD_813X_MISC 0x40 +#define AMD_813X_NOIOAMODE (1<<0) +#define AMD_813X_REV_B1 0x12 +#define AMD_813X_REV_B2 0x13 + +static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + + if (noioapicquirk) + return; + if ((dev->revision == AMD_813X_REV_B1) || + (dev->revision == AMD_813X_REV_B2)) + return; + + pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); + pci_config_dword &= ~AMD_813X_NOIOAMODE; + pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); + + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); + +#define AMD_8111_PCI_IRQ_ROUTING 0x56 + +static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); + if (!pci_config_word) { + dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", + dev->vendor, dev->device); + return; + } + pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); + dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +#endif /* CONFIG_X86_IO_APIC */ + /* * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. * Re-allocate the region if needed... */ -static void __init quirk_tc86c001_ide(struct pci_dev *dev) +static void quirk_tc86c001_ide(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; if (r->start & 0x8) { + r->flags |= IORESOURCE_UNSET; r->start = 0; r->end = 0xf; } @@ -1381,7 +1754,46 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, quirk_tc86c001_ide); -static void __devinit quirk_netmos(struct pci_dev *dev) +/* + * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the + * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) + * being read correctly if bit 7 of the base address is set. + * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). + * Re-allocate the regions to a 256-byte boundary if necessary. + */ +static void quirk_plx_pci9050(struct pci_dev *dev) +{ + unsigned int bar; + + /* Fixed in revision 2 (PCI 9052). */ + if (dev->revision >= 2) + return; + for (bar = 0; bar <= 1; bar++) + if (pci_resource_len(dev, bar) == 0x80 && + (pci_resource_start(dev, bar) & 0x80)) { + struct resource *r = &dev->resource[bar]; + dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", + bar); + r->flags |= IORESOURCE_UNSET; + r->start = 0; + r->end = 0xff; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + quirk_plx_pci9050); +/* + * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) + * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, + * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, + * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. + * + * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" + * driver. + */ +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); + +static void quirk_netmos(struct pci_dev *dev) { unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; unsigned int num_serial = dev->subsystem_device & 0xf; @@ -1397,30 +1809,31 @@ static void __devinit quirk_netmos(struct pci_dev *dev) * of parallel ports and <S> is the number of serial ports. */ switch (dev->device) { + case PCI_DEVICE_ID_NETMOS_9835: + /* Well, this rule doesn't hold for the following 9835 device */ + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return; case PCI_DEVICE_ID_NETMOS_9735: case PCI_DEVICE_ID_NETMOS_9745: - case PCI_DEVICE_ID_NETMOS_9835: case PCI_DEVICE_ID_NETMOS_9845: case PCI_DEVICE_ID_NETMOS_9855: - if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL && - num_parallel) { - dev_info(&dev->dev, "Netmos %04x (%u parallel, " - "%u serial); changing class SERIAL to OTHER " - "(use parport_serial)\n", + if (num_parallel) { + dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", dev->device, num_parallel, num_serial); dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | (dev->class & 0xff); } } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); -static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +static void quirk_e100_interrupt(struct pci_dev *dev) { u16 command, pmcsr; u8 __iomem *csr; u8 cmd_hi; - int pm; switch (dev->device) { /* PCI IDs taken from drivers/net/e100.c */ @@ -1458,9 +1871,8 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) * Check that the device is in the D0 power state. If it's not, * there is no point to look any further. */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (pm) { - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + if (dev->pm_cap) { + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) return; } @@ -1474,16 +1886,40 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) cmd_hi = readb(csr + 3); if (cmd_hi == 0) { - dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; " - "disabling\n"); + dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); writeb(1, csr + 3); } iounmap(csr); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); -static void __devinit fixup_rev1_53c810(struct pci_dev* dev) +/* + * The 82575 and 82598 may experience data corruption issues when transitioning + * out of L0S. To prevent this we need to disable L0S on the pci-e link + */ +static void quirk_disable_aspm_l0s(struct pci_dev *dev) +{ + dev_info(&dev->dev, "Disabling L0s\n"); + pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); + +static void fixup_rev1_53c810(struct pci_dev *dev) { /* rev 1 ncr53c810 chips don't set the class at all which means * they don't get their resources remapped. Fix that here. @@ -1496,123 +1932,20 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); -static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) -{ - while (f < end) { - if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) && - (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) { -#ifdef DEBUG - dev_dbg(&dev->dev, "calling quirk 0x%p", f->hook); - print_fn_descriptor_symbol(": %s()\n", - (unsigned long) f->hook); -#endif - f->hook(dev); - } - f++; - } -} - -extern struct pci_fixup __start_pci_fixups_early[]; -extern struct pci_fixup __end_pci_fixups_early[]; -extern struct pci_fixup __start_pci_fixups_header[]; -extern struct pci_fixup __end_pci_fixups_header[]; -extern struct pci_fixup __start_pci_fixups_final[]; -extern struct pci_fixup __end_pci_fixups_final[]; -extern struct pci_fixup __start_pci_fixups_enable[]; -extern struct pci_fixup __end_pci_fixups_enable[]; -extern struct pci_fixup __start_pci_fixups_resume[]; -extern struct pci_fixup __end_pci_fixups_resume[]; - - -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) -{ - struct pci_fixup *start, *end; - - switch(pass) { - case pci_fixup_early: - start = __start_pci_fixups_early; - end = __end_pci_fixups_early; - break; - - case pci_fixup_header: - start = __start_pci_fixups_header; - end = __end_pci_fixups_header; - break; - - case pci_fixup_final: - start = __start_pci_fixups_final; - end = __end_pci_fixups_final; - break; - - case pci_fixup_enable: - start = __start_pci_fixups_enable; - end = __end_pci_fixups_enable; - break; - - case pci_fixup_resume: - start = __start_pci_fixups_resume; - end = __end_pci_fixups_resume; - break; - - default: - /* stupid compiler warning, you would think with an enum... */ - return; - } - pci_do_fixups(dev, start, end); -} -EXPORT_SYMBOL(pci_fixup_device); - /* Enable 1k I/O space granularity on the Intel P64H2 */ -static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) +static void quirk_p64h2_1k_io(struct pci_dev *dev) { u16 en1k; - u8 io_base_lo, io_limit_lo; - unsigned long base, limit; - struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; pci_read_config_word(dev, 0x40, &en1k); if (en1k & 0x200) { dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); - - pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); - pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); - base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; - limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8; - - if (base <= limit) { - res->start = base; - res->end = limit + 0x3ff; - } + dev->io_window_1k = 1; } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); -/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2 - * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge() - * in drivers/pci/setup-bus.c - */ -static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev) -{ - u16 en1k, iobl_adr, iobl_adr_1k; - struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES; - - pci_read_config_word(dev, 0x40, &en1k); - - if (en1k & 0x200) { - pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr); - - iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00); - - if (iobl_adr != iobl_adr_1k) { - dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n", - iobl_adr,iobl_adr_1k); - pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k); - } - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl); - /* Under some circumstances, AER is not linked with extended capabilities. * Force it to be linked by setting the corresponding control bit in the * config space. @@ -1623,51 +1956,178 @@ static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) if (pci_read_config_byte(dev, 0xf41, &b) == 0) { if (!(b & 0x20)) { pci_write_config_byte(dev, 0xf41, b | 0x20); - dev_info(&dev->dev, - "Linking AER extended capability\n"); + dev_info(&dev->dev, "Linking AER extended capability\n"); } } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); -DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); -static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) +static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) { /* * Disable PCI Bus Parking and PCI Master read caching on CX700 * which causes unspecified timing errors with a VT6212L on the PCI - * bus leading to USB2.0 packet loss. The defaults are that these - * features are turned off but some BIOSes turn them on. + * bus leading to USB2.0 packet loss. + * + * This quirk is only enabled if a second (on the external PCI bus) + * VT6212L is found -- the CX700 core itself also contains a USB + * host controller with the same PCI ID as the VT6212L. */ + /* Count VT6212L instances */ + struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8235_USB_2, NULL); uint8_t b; + + /* p should contain the first (internal) VT6212L -- see if we have + an external one by searching again */ + p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); + if (!p) + return; + pci_dev_put(p); + if (pci_read_config_byte(dev, 0x76, &b) == 0) { if (b & 0x40) { /* Turn off PCI Bus Parking */ pci_write_config_byte(dev, 0x76, b ^ 0x40); + dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); + } + } + + if (pci_read_config_byte(dev, 0x72, &b) == 0) { + if (b != 0) { /* Turn off PCI Master read caching */ pci_write_config_byte(dev, 0x72, 0x0); + + /* Set PCI Master Bus time-out to "1x16 PCLK" */ pci_write_config_byte(dev, 0x75, 0x1); + + /* Disable "Read FIFO Timer" */ pci_write_config_byte(dev, 0x77, 0x0); - dev_info(&dev->dev, - "Disabling VIA CX700 PCI parking/caching\n"); + dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); } } } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); + +/* + * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the + * VPD end tag will hang the device. This problem was initially + * observed when a vpd entry was created in sysfs + * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry + * will dump 32k of data. Reading a full 32k will cause an access + * beyond the VPD end tag causing the device to hang. Once the device + * is hung, the bnx2 driver will not be able to reset the device. + * We believe that it is legal to read beyond the end tag and + * therefore the solution is to limit the read/write length. + */ +static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +{ + /* + * Only disable the VPD capability for 5706, 5706S, 5708, + * 5708S and 5709 rev. A + */ + if ((dev->device == PCI_DEVICE_ID_NX2_5706) || + (dev->device == PCI_DEVICE_ID_NX2_5706S) || + (dev->device == PCI_DEVICE_ID_NX2_5708) || + (dev->device == PCI_DEVICE_ID_NX2_5708S) || + ((dev->device == PCI_DEVICE_ID_NX2_5709) && + (dev->revision & 0xf0) == 0x0)) { + if (dev->vpd) + dev->vpd->len = 0x80; + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); + +static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) +{ + u32 rev; + + pci_read_config_dword(dev, 0xf4, &rev); + + /* Only CAP the MRRS if the device is a 5719 A0 */ + if (rev == 0x05719000) { + int readrq = pcie_get_readrq(dev); + if (readrq > 2048) + pcie_set_readrq(dev, 2048); + } +} + +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_TIGON3_5719, + quirk_brcm_5719_limit_mrrs); + +/* Originally in EDAC sources for i82875P: + * Intel tells BIOS developers to hide device 6 which + * configures the overflow device access containing + * the DRBs - this is where we expose device 6. + * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm + */ +static void quirk_unhide_mch_dev6(struct pci_dev *dev) +{ + u8 reg; + + if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { + dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); + pci_write_config_byte(dev, 0xF4, reg | 0x02); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, + quirk_unhide_mch_dev6); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, + quirk_unhide_mch_dev6); + +#ifdef CONFIG_TILEPRO +/* + * The Tilera TILEmpower tilepro platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILEPRO */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually - * some other busses controlled by the chipset even if Linux is not - * aware of it. Instead of setting the flag on all busses in the + * some other buses controlled by the chipset even if Linux is not + * aware of it. Instead of setting the flag on all buses in the * machine, simply disable MSI globally. */ -static void __init quirk_disable_all_msi(struct pci_dev *dev) +static void quirk_disable_all_msi(struct pci_dev *dev) { pci_no_msi(); dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); @@ -1675,22 +2135,46 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ -static void __devinit quirk_disable_msi(struct pci_dev *dev) +static void quirk_disable_msi(struct pci_dev *dev) { if (dev->subordinate) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); + +/* + * The APC bridge device in AMD 780 family northbridges has some random + * OEM subsystem ID in its vendor ID register (erratum 18), so instead + * we use the possible vendor/device IDs of the host bridge for the + * declared quirk, and search for the APC bridge by slot number. + */ +static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) +{ + struct pci_dev *apc_bridge; + + apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); + if (apc_bridge) { + if (apc_bridge->device == 0x9602) + quirk_disable_msi(apc_bridge); + pci_dev_put(apc_bridge); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); /* Go through the list of Hypertransport capabilities and * return 1 if a HT MSI capability is found and enabled */ -static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) +static int msi_ht_cap_enabled(struct pci_dev *dev) { int pos, ttl = 48; @@ -1699,8 +2183,7 @@ static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) u8 flags; if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, - &flags) == 0) - { + &flags) == 0) { dev_info(&dev->dev, "Found %s HT MSI Mapping\n", flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled"); @@ -1714,22 +2197,20 @@ static int __devinit msi_ht_cap_enabled(struct pci_dev *dev) } /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ -static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) +static void quirk_msi_ht_cap(struct pci_dev *dev) { if (dev->subordinate && !msi_ht_cap_enabled(dev)) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, quirk_msi_ht_cap); - /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ -static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) +static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) { struct pci_dev *pdev; @@ -1743,8 +2224,7 @@ static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) if (!pdev) return; if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { - dev_warn(&dev->dev, "MSI quirk detected; " - "subordinate MSI disabled\n"); + dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; } pci_dev_put(pdev); @@ -1753,7 +2233,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_msi_ht_cap); /* Force enable MSI mapping capability on HT bridges */ -static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) +static void ht_enable_msi_mapping(struct pci_dev *dev) { int pos, ttl = 48; @@ -1776,51 +2256,278 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); -static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, + ht_enable_msi_mapping); + +/* The P5N32-SLI motherboards from Asus have a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void nvenet_msi_disable(struct pci_dev *dev) +{ + const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && + (strstr(board_name, "P5N32-SLI PREMIUM") || + strstr(board_name, "P5N32-E SLI"))) { + dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + +/* + * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing + * config register. This register controls the routing of legacy + * interrupts from devices that route through the MCP55. If this register + * is misprogrammed, interrupts are only sent to the BSP, unlike + * conventional systems where the IRQ is broadcast to all online CPUs. Not + * having this register set properly prevents kdump from booting up + * properly, so let's make sure that we have it set correctly. + * Note that this is an undocumented register. + */ +static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) +{ + u32 cfg; + + if (!pci_find_capability(dev, PCI_CAP_ID_HT)) + return; + + pci_read_config_dword(dev, 0x74, &cfg); + + if (cfg & ((1 << 2) | (1 << 15))) { + printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); + cfg &= ~((1 << 2) | (1 << 15)); + pci_write_config_dword(dev, 0x74, cfg); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, + nvbridge_check_legacy_irq_routing); + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, + nvbridge_check_legacy_irq_routing); + +static int ht_check_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + int found = 0; + + /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (found < 1) + found = 1; + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + if (flags & HT_MSI_FLAGS_ENABLE) { + if (found < 2) { + found = 2; + break; + } + } + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + + return found; +} + +static int host_bridge_with_leaf(struct pci_dev *host_bridge) +{ + struct pci_dev *dev; + int pos; + int i, dev_no; + int found = 0; + + dev_no = host_bridge->devfn >> 3; + for (i = dev_no + 1; i < 0x20; i++) { + dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); + if (!dev) + continue; + + /* found next host bridge ?*/ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); + if (pos != 0) { + pci_dev_put(dev); + break; + } + + if (ht_check_msi_mapping(dev)) { + found = 1; + pci_dev_put(dev); + break; + } + pci_dev_put(dev); + } + + return found; +} + +#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ +#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ + +static int is_end_of_ht_chain(struct pci_dev *dev) +{ + int pos, ctrl_off; + int end = 0; + u16 flags, ctrl; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); + + if (!pos) + goto out; + + pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); + + ctrl_off = ((flags >> 10) & 1) ? + PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; + pci_read_config_word(dev, pos + ctrl_off, &ctrl); + + if (ctrl & (1 << 6)) + end = 1; + +out: + return end; +} + +static void nv_ht_enable_msi_mapping(struct pci_dev *dev) { struct pci_dev *host_bridge; + int pos; + int i, dev_no; + int found = 0; + + dev_no = dev->devfn >> 3; + for (i = dev_no; i >= 0; i--) { + host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); + if (!host_bridge) + continue; + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + found = 1; + break; + } + pci_dev_put(host_bridge); + } + + if (!found) + return; + + /* don't enable end_device/host_bridge with leaf directly here */ + if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && + host_bridge_with_leaf(host_bridge)) + goto out; + + /* root did that ! */ + if (msi_ht_cap_enabled(host_bridge)) + goto out; + + ht_enable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void ht_disable_msi_mapping(struct pci_dev *dev) +{ int pos, ttl = 48; + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) +{ + struct pci_dev *host_bridge; + int pos; + int found; + + if (!pci_msi_enabled()) + return; + + /* check if there is HT MSI cap or enabled on this device */ + found = ht_check_msi_mapping(dev); + + /* no HT MSI CAP */ + if (found == 0) + return; + /* * HT MSI mapping should be disabled on devices that are below * a non-Hypertransport host bridge. Locate the host bridge... */ host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); if (host_bridge == NULL) { - dev_warn(&dev->dev, - "nv_msi_ht_cap_quirk didn't locate host bridge\n"); + dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); return; } pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); if (pos != 0) { /* Host bridge is to HT */ - ht_enable_msi_mapping(dev); - return; + if (found == 1) { + /* it is not enabled, try to enable it */ + if (all) + ht_enable_msi_mapping(dev); + else + nv_ht_enable_msi_mapping(dev); + } + goto out; } + /* HT MSI is not enabled */ + if (found == 1) + goto out; + /* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); - while (pos && ttl--) { - u8 flags; + ht_disable_msi_mapping(dev); - if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, - &flags) == 0) { - dev_info(&dev->dev, "Disabling HT MSI mapping"); - pci_write_config_byte(dev, pos + HT_MSI_FLAGS, - flags & ~HT_MSI_FLAGS_ENABLE); - } - pos = pci_find_next_ht_capability(dev, pos, - HT_CAPTYPE_MSI_MAPPING); - } +out: + pci_dev_put(host_bridge); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); -static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) +static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) +{ + return __nv_msi_ht_cap_quirk(dev, 1); +} + +static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) +{ + return __nv_msi_ht_cap_quirk(dev, 0); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); + +static void quirk_msi_intx_disable_bug(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; } -static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) +static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) { struct pci_dev *p; @@ -1837,6 +2544,14 @@ static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; pci_dev_put(p); } +static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) +{ + /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ + if (dev->revision < 0x18) { + dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); + dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; + } +} DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780, quirk_msi_intx_disable_bug); @@ -1874,4 +2589,1140 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, + quirk_msi_intx_disable_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, + quirk_msi_intx_disable_qca_bug); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, + quirk_msi_intx_disable_qca_bug); #endif /* CONFIG_PCI_MSI */ + +/* Allow manual resource allocation for PCI hotplug bridges + * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For + * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), + * kernel fails to allocate resources when hotplug device is + * inserted and PCI bus is rescanned. + */ +static void quirk_hotplug_bridge(struct pci_dev *dev) +{ + dev->is_hotplug_bridge = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); + +/* + * This is a quirk for the Ricoh MMC controller found as a part of + * some mulifunction chips. + + * This is very similar and based on the ricoh_mmc driver written by + * Philip Langdale. Thank you for these magic sequences. + * + * These chips implement the four main memory card controllers (SD, MMC, MS, xD) + * and one or both of cardbus or firewire. + * + * It happens that they implement SD and MMC + * support as separate controllers (and PCI functions). The linux SDHCI + * driver supports MMC cards but the chip detects MMC cards in hardware + * and directs them to the MMC controller - so the SDHCI driver never sees + * them. + * + * To get around this, we must disable the useless MMC controller. + * At that point, the SDHCI controller will start seeing them + * It seems to be the case that the relevant PCI registers to deactivate the + * MMC controller live on PCI function 0, which might be the cardbus controller + * or the firewire controller, depending on the particular chip in question + * + * This has to be done early, because as soon as we disable the MMC controller + * other pci functions shift up one level, e.g. function #2 becomes function + * #1, and this will confuse the pci core. + */ + +#ifdef CONFIG_MMC_RICOH_MMC +static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) +{ + /* disable via cardbus interface */ + u8 write_enable; + u8 write_target; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + + pci_read_config_byte(dev, 0xB7, &disable); + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0x8E, &write_enable); + pci_write_config_byte(dev, 0x8E, 0xAA); + pci_read_config_byte(dev, 0x8D, &write_target); + pci_write_config_byte(dev, 0x8D, 0xB7); + pci_write_config_byte(dev, 0xB7, disable | 0x02); + pci_write_config_byte(dev, 0x8E, write_enable); + pci_write_config_byte(dev, 0x8D, write_target); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); + +static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) +{ + /* disable via firewire interface */ + u8 write_enable; + u8 disable; + + /* disable must be done via function #0 */ + if (PCI_FUNC(dev->devfn)) + return; + /* + * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize + * certain types of SD/MMC cards. Lowering the SD base + * clock frequency from 200Mhz to 50Mhz fixes this issue. + * + * 0x150 - SD2.0 mode enable for changing base clock + * frequency to 50Mhz + * 0xe1 - Base clock frequency + * 0x32 - 50Mhz new clock frequency + * 0xf9 - Key register for 0x150 + * 0xfc - key register for 0xe1 + */ + if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || + dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { + pci_write_config_byte(dev, 0xf9, 0xfc); + pci_write_config_byte(dev, 0x150, 0x10); + pci_write_config_byte(dev, 0xf9, 0x00); + pci_write_config_byte(dev, 0xfc, 0x01); + pci_write_config_byte(dev, 0xe1, 0x32); + pci_write_config_byte(dev, 0xfc, 0x00); + + dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); + } + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); + +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +#endif /*CONFIG_MMC_RICOH_MMC*/ + +#ifdef CONFIG_DMAR_TABLE +#define VTUNCERRMSK_REG 0x1ac +#define VTD_MSK_SPEC_ERRORS (1 << 31) +/* + * This is a quirk for masking vt-d spec defined errors to platform error + * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based + * on the RAS config settings of the platform) when a vt-d fault happens. + * The resulting SMI caused the system to hang. + * + * VT-d spec related errors are already handled by the VT-d OS code, so no + * need to report the same error through other channels. + */ +static void vtd_mask_spec_errors(struct pci_dev *dev) +{ + u32 word; + + pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); + pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); +#endif + +static void fixup_ti816x_class(struct pci_dev *dev) +{ + /* TI 816x devices do not have class code set when in PCIe boot mode */ + dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n"); + dev->class = PCI_CLASS_MULTIMEDIA_VIDEO; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, + PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class); + +/* Some PCIe devices do not work reliably with the claimed maximum + * payload size supported. + */ +static void fixup_mpss_256(struct pci_dev *dev) +{ + dev->pcie_mpss = 1; /* 256 bytes */ +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, + PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); + +/* Intel 5000 and 5100 Memory controllers have an errata with read completion + * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. + * Since there is no way of knowing what the PCIE MPS on each fabric will be + * until all of the devices are discovered and buses walked, read completion + * coalescing must be disabled. Unfortunately, it cannot be re-enabled because + * it is possible to hotplug a device with MPS of 256B. + */ +static void quirk_intel_mc_errata(struct pci_dev *dev) +{ + int err; + u16 rcc; + + if (pcie_bus_config == PCIE_BUS_TUNE_OFF) + return; + + /* Intel errata specifies bits to change but does not say what they are. + * Keeping them magical until such time as the registers and values can + * be explained. + */ + err = pci_read_config_word(dev, 0x48, &rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); + return; + } + + if (!(rcc & (1 << 10))) + return; + + rcc &= ~(1 << 10); + + err = pci_write_config_word(dev, 0x48, rcc); + if (err) { + dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); + return; + } + + pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); +} +/* Intel 5000 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); +/* Intel 5100 series memory controllers and ports 2-7 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); + + +/* + * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To + * work around this, query the size it should be configured to by the device and + * modify the resource end to correspond to this new size. + */ +static void quirk_intel_ntb(struct pci_dev *dev) +{ + int rc; + u8 val; + + rc = pci_read_config_byte(dev, 0x00D0, &val); + if (rc) + return; + + dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; + + rc = pci_read_config_byte(dev, 0x00D1, &val); + if (rc) + return; + + dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); + +static ktime_t fixup_debug_start(struct pci_dev *dev, + void (*fn)(struct pci_dev *dev)) +{ + ktime_t calltime = ktime_set(0, 0); + + dev_dbg(&dev->dev, "calling %pF\n", fn); + if (initcall_debug) { + pr_debug("calling %pF @ %i for %s\n", + fn, task_pid_nr(current), dev_name(&dev->dev)); + calltime = ktime_get(); + } + + return calltime; +} + +static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, + void (*fn)(struct pci_dev *dev)) +{ + ktime_t delta, rettime; + unsigned long long duration; + + if (initcall_debug) { + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + pr_debug("pci fixup %pF returned after %lld usecs for %s\n", + fn, duration, dev_name(&dev->dev)); + } +} + +/* + * Some BIOS implementations leave the Intel GPU interrupts enabled, + * even though no one is handling them (f.e. i915 driver is never loaded). + * Additionally the interrupt destination is not set up properly + * and the interrupt ends up -somewhere-. + * + * These spurious interrupts are "sticky" and the kernel disables + * the (shared) interrupt line after 100.000+ generated interrupts. + * + * Fix it by disabling the still enabled interrupts. + * This resolves crashes often seen on monitor unplug. + */ +#define I915_DEIER_REG 0x4400c +static void disable_igfx_irq(struct pci_dev *dev) +{ + void __iomem *regs = pci_iomap(dev, 0, 0); + if (regs == NULL) { + dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); + return; + } + + /* Check if any interrupt line is still enabled */ + if (readl(regs + I915_DEIER_REG) != 0) { + dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); + + writel(0, regs + I915_DEIER_REG); + } + + pci_iounmap(dev, regs); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); + +/* + * PCI devices which are on Intel chips can skip the 10ms delay + * before entering D3 mode. + */ +static void quirk_remove_d3_delay(struct pci_dev *dev) +{ + dev->d3_delay = 0; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); + +/* + * Some devices may pass our check in pci_intx_mask_supported if + * PCI_COMMAND_INTX_DISABLE works though they actually do not properly + * support this feature. + */ +static void quirk_broken_intx_masking(struct pci_dev *dev) +{ + dev->broken_intx_masking = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030, + quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ + quirk_broken_intx_masking); +/* + * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) + * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC + * + * RTL8110SC - Fails under PCI device assignment using DisINTx masking. + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169, + quirk_broken_intx_masking); + +static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, + struct pci_fixup *end) +{ + ktime_t calltime; + + for (; f < end; f++) + if ((f->class == (u32) (dev->class >> f->class_shift) || + f->class == (u32) PCI_ANY_ID) && + (f->vendor == dev->vendor || + f->vendor == (u16) PCI_ANY_ID) && + (f->device == dev->device || + f->device == (u16) PCI_ANY_ID)) { + calltime = fixup_debug_start(dev, f->hook); + f->hook(dev); + fixup_debug_report(dev, calltime, f->hook); + } +} + +extern struct pci_fixup __start_pci_fixups_early[]; +extern struct pci_fixup __end_pci_fixups_early[]; +extern struct pci_fixup __start_pci_fixups_header[]; +extern struct pci_fixup __end_pci_fixups_header[]; +extern struct pci_fixup __start_pci_fixups_final[]; +extern struct pci_fixup __end_pci_fixups_final[]; +extern struct pci_fixup __start_pci_fixups_enable[]; +extern struct pci_fixup __end_pci_fixups_enable[]; +extern struct pci_fixup __start_pci_fixups_resume[]; +extern struct pci_fixup __end_pci_fixups_resume[]; +extern struct pci_fixup __start_pci_fixups_resume_early[]; +extern struct pci_fixup __end_pci_fixups_resume_early[]; +extern struct pci_fixup __start_pci_fixups_suspend[]; +extern struct pci_fixup __end_pci_fixups_suspend[]; + +static bool pci_apply_fixup_final_quirks; + +void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) +{ + struct pci_fixup *start, *end; + + switch (pass) { + case pci_fixup_early: + start = __start_pci_fixups_early; + end = __end_pci_fixups_early; + break; + + case pci_fixup_header: + start = __start_pci_fixups_header; + end = __end_pci_fixups_header; + break; + + case pci_fixup_final: + if (!pci_apply_fixup_final_quirks) + return; + start = __start_pci_fixups_final; + end = __end_pci_fixups_final; + break; + + case pci_fixup_enable: + start = __start_pci_fixups_enable; + end = __end_pci_fixups_enable; + break; + + case pci_fixup_resume: + start = __start_pci_fixups_resume; + end = __end_pci_fixups_resume; + break; + + case pci_fixup_resume_early: + start = __start_pci_fixups_resume_early; + end = __end_pci_fixups_resume_early; + break; + + case pci_fixup_suspend: + start = __start_pci_fixups_suspend; + end = __end_pci_fixups_suspend; + break; + + default: + /* stupid compiler warning, you would think with an enum... */ + return; + } + pci_do_fixups(dev, start, end); +} +EXPORT_SYMBOL(pci_fixup_device); + + +static int __init pci_apply_final_quirks(void) +{ + struct pci_dev *dev = NULL; + u8 cls = 0; + u8 tmp; + + if (pci_cache_line_size) + printk(KERN_DEBUG "PCI: CLS %u bytes\n", + pci_cache_line_size << 2); + + pci_apply_fixup_final_quirks = true; + for_each_pci_dev(dev) { + pci_fixup_device(pci_fixup_final, dev); + /* + * If arch hasn't set it explicitly yet, use the CLS + * value shared by all PCI devices. If there's a + * mismatch, fall back to the default value. + */ + if (!pci_cache_line_size) { + pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); + if (!cls) + cls = tmp; + if (!tmp || cls == tmp) + continue; + + printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", + cls << 2, tmp << 2, + pci_dfl_cache_line_size << 2); + pci_cache_line_size = pci_dfl_cache_line_size; + } + } + + if (!pci_cache_line_size) { + printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", + cls << 2, pci_dfl_cache_line_size << 2); + pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; + } + + return 0; +} + +fs_initcall_sync(pci_apply_final_quirks); + +/* + * Followings are device-specific reset methods which can be used to + * reset a single function if other methods (e.g. FLR, PM D0->D3) are + * not available. + */ +static int reset_intel_generic_dev(struct pci_dev *dev, int probe) +{ + int pos; + + /* only implement PCI_CLASS_SERIAL_USB at present */ + if (dev->class == PCI_CLASS_SERIAL_USB) { + pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); + if (!pos) + return -ENOTTY; + + if (probe) + return 0; + + pci_write_config_byte(dev, pos + 0x4, 1); + msleep(100); + + return 0; + } else { + return -ENOTTY; + } +} + +static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) +{ + /* + * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf + * + * The 82599 supports FLR on VFs, but FLR support is reported only + * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). + * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. + */ + + if (probe) + return 0; + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); + + msleep(100); + + return 0; +} + +#include "../gpu/drm/i915/i915_reg.h" +#define MSG_CTL 0x45010 +#define NSDE_PWR_STATE 0xd0100 +#define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ + +static int reset_ivb_igd(struct pci_dev *dev, int probe) +{ + void __iomem *mmio_base; + unsigned long timeout; + u32 val; + + if (probe) + return 0; + + mmio_base = pci_iomap(dev, 0, 0); + if (!mmio_base) + return -ENOMEM; + + iowrite32(0x00000002, mmio_base + MSG_CTL); + + /* + * Clobbering SOUTH_CHICKEN2 register is fine only if the next + * driver loaded sets the right bits. However, this's a reset and + * the bits have been set by i915 previously, so we clobber + * SOUTH_CHICKEN2 register directly here. + */ + iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); + + val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; + iowrite32(val, mmio_base + PCH_PP_CONTROL); + + timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); + do { + val = ioread32(mmio_base + PCH_PP_STATUS); + if ((val & 0xb0000000) == 0) + goto reset_complete; + msleep(10); + } while (time_before(jiffies, timeout)); + dev_warn(&dev->dev, "timeout during reset\n"); + +reset_complete: + iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); + + pci_iounmap(dev, mmio_base); + return 0; +} + +/* + * Device-specific reset method for Chelsio T4-based adapters. + */ +static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) +{ + u16 old_command; + u16 msix_flags; + + /* + * If this isn't a Chelsio T4-based device, return -ENOTTY indicating + * that we have no device-specific reset method. + */ + if ((dev->device & 0xf000) != 0x4000) + return -ENOTTY; + + /* + * If this is the "probe" phase, return 0 indicating that we can + * reset this device. + */ + if (probe) + return 0; + + /* + * T4 can wedge if there are DMAs in flight within the chip and Bus + * Master has been disabled. We need to have it on till the Function + * Level Reset completes. (BUS_MASTER is disabled in + * pci_reset_function()). + */ + pci_read_config_word(dev, PCI_COMMAND, &old_command); + pci_write_config_word(dev, PCI_COMMAND, + old_command | PCI_COMMAND_MASTER); + + /* + * Perform the actual device function reset, saving and restoring + * configuration information around the reset. + */ + pci_save_state(dev); + + /* + * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts + * are disabled when an MSI-X interrupt message needs to be delivered. + * So we briefly re-enable MSI-X interrupts for the duration of the + * FLR. The pci_restore_state() below will restore the original + * MSI-X state. + */ + pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); + if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) + pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, + msix_flags | + PCI_MSIX_FLAGS_ENABLE | + PCI_MSIX_FLAGS_MASKALL); + + /* + * Start of pcie_flr() code sequence. This reset code is a copy of + * the guts of pcie_flr() because that's not an exported function. + */ + + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); + + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); + msleep(100); + + /* + * End of pcie_flr() code sequence. + */ + + /* + * Restore the configuration information (BAR values, etc.) including + * the original PCI Configuration Space Command word, and return + * success. + */ + pci_restore_state(dev); + pci_write_config_word(dev, PCI_COMMAND, old_command); + return 0; +} + +#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed +#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 +#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 + +static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, + reset_intel_82599_sfp_virtfn }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, + reset_ivb_igd }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, + reset_ivb_igd }, + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + reset_intel_generic_dev }, + { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, + reset_chelsio_generic_dev }, + { 0 } +}; + +/* + * These device-specific reset methods are here rather than in a driver + * because when a host assigns a device to a guest VM, the host may need + * to reset the device but probably doesn't have a driver for it. + */ +int pci_dev_specific_reset(struct pci_dev *dev, int probe) +{ + const struct pci_dev_reset_methods *i; + + for (i = pci_dev_reset_methods; i->reset; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->reset(dev, probe); + } + + return -ENOTTY; +} + +static void quirk_dma_func0_alias(struct pci_dev *dev) +{ + if (PCI_FUNC(dev->devfn) != 0) { + dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + } +} + +/* + * https://bugzilla.redhat.com/show_bug.cgi?id=605888 + * + * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); + +static void quirk_dma_func1_alias(struct pci_dev *dev) +{ + if (PCI_FUNC(dev->devfn) != 1) { + dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1); + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; + } +} + +/* + * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some + * SKUs function 1 is present and is a legacy IDE controller, in other + * SKUs this function is not present, making this a ghost requester. + * https://bugzilla.kernel.org/show_bug.cgi?id=42679 + */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, + quirk_dma_func1_alias); +/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, + quirk_dma_func1_alias); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, + quirk_dma_func1_alias); +/* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, + PCI_DEVICE_ID_JMICRON_JMB388_ESD, + quirk_dma_func1_alias); + +/* + * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in + * using the wrong DMA alias for the device. Some of these devices can be + * used as either forward or reverse bridges, so we need to test whether the + * device is operating in the correct mode. We could probably apply this + * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test + * is for a non-root, non-PCIe bridge where the upstream device is PCIe and + * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. + */ +static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) +{ + if (!pci_is_root_bus(pdev->bus) && + pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && + pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) + pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; +} +/* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, + quirk_use_pcie_bridge_dma_alias); +/* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ +DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); +/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ +DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); + +static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev) +{ + if (!PCI_FUNC(dev->devfn)) + return pci_dev_get(dev); + + return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); +} + +static const struct pci_dev_dma_source { + u16 vendor; + u16 device; + struct pci_dev *(*dma_source)(struct pci_dev *dev); +} pci_dev_dma_source[] = { + /* + * https://bugzilla.redhat.com/show_bug.cgi?id=605888 + * + * Some Ricoh devices use the function 0 source ID for DMA on + * other functions of a multifunction device. The DMA devices + * is therefore function 0, which will have implications of the + * iommu grouping of these devices. + */ + { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source }, + { 0 } +}; + +/* + * IOMMUs with isolation capabilities need to be programmed with the + * correct source ID of a device. In most cases, the source ID matches + * the device doing the DMA, but sometimes hardware is broken and will + * tag the DMA as being sourced from a different device. This function + * allows that translation. Note that the reference count of the + * returned device is incremented on all paths. + */ +struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + const struct pci_dev_dma_source *i; + + for (i = pci_dev_dma_source; i->dma_source; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->dma_source(dev); + } + + return pci_dev_get(dev); +} + +/* + * AMD has indicated that the devices below do not support peer-to-peer + * in any system where they are found in the southbridge with an AMD + * IOMMU in the system. Multifunction devices that do not support + * peer-to-peer between functions can claim to support a subset of ACS. + * Such devices effectively enable request redirect (RR) and completion + * redirect (CR) since all transactions are redirected to the upstream + * root complex. + * + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 + * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 + * + * 1002:4385 SBx00 SMBus Controller + * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller + * 1002:4383 SBx00 Azalia (Intel HDA) + * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller + * 1002:4384 SBx00 PCI to PCI Bridge + * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller + */ +static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) +{ +#ifdef CONFIG_ACPI + struct acpi_table_header *header = NULL; + acpi_status status; + + /* Targeting multifunction devices on the SB (appears on root bus) */ + if (!dev->multifunction || !pci_is_root_bus(dev->bus)) + return -ENODEV; + + /* The IVRS table describes the AMD IOMMU */ + status = acpi_get_table("IVRS", 0, &header); + if (ACPI_FAILURE(status)) + return -ENODEV; + + /* Filter out flags not applicable to multifunction */ + acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); + + return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; +#else + return -ENODEV; +#endif +} + +/* + * Many Intel PCH root ports do provide ACS-like features to disable peer + * transactions and validate bus numbers in requests, but do not provide an + * actual PCIe ACS capability. This is the list of device IDs known to fall + * into that category as provided by Intel in Red Hat bugzilla 1037684. + */ +static const u16 pci_quirk_intel_pch_acs_ids[] = { + /* Ibexpeak PCH */ + 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, + 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, + /* Cougarpoint PCH */ + 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, + 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, + /* Pantherpoint PCH */ + 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, + 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, + /* Lynxpoint-H PCH */ + 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, + 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, + /* Lynxpoint-LP PCH */ + 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, + 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, + /* Wildcat PCH */ + 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, + 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, + /* Patsburg (X79) PCH */ + 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, +}; + +static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) +{ + int i; + + /* Filter out a few obvious non-matches first */ + if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) + return false; + + for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) + if (pci_quirk_intel_pch_acs_ids[i] == dev->device) + return true; + + return false; +} + +#define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) + +static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) +{ + u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? + INTEL_PCH_ACS_FLAGS : 0; + + if (!pci_quirk_intel_pch_acs_match(dev)) + return -ENOTTY; + + return acs_flags & ~flags ? 0 : 1; +} + +static const struct pci_dev_acs_enabled { + u16 vendor; + u16 device; + int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); +} pci_dev_acs_enabled[] = { + { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, + { 0 } +}; + +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) +{ + const struct pci_dev_acs_enabled *i; + int ret; + + /* + * Allow devices that do not expose standard PCIe ACS capabilities + * or control to indicate their support here. Multi-function express + * devices which do not allow internal peer-to-peer between functions, + * but do not implement PCIe ACS may wish to return true here. + */ + for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->acs_enabled(dev, acs_flags); + if (ret >= 0) + return ret; + } + } + + return -ENOTTY; +} + +/* Config space offset of Root Complex Base Address register */ +#define INTEL_LPC_RCBA_REG 0xf0 +/* 31:14 RCBA address */ +#define INTEL_LPC_RCBA_MASK 0xffffc000 +/* RCBA Enable */ +#define INTEL_LPC_RCBA_ENABLE (1 << 0) + +/* Backbone Scratch Pad Register */ +#define INTEL_BSPR_REG 0x1104 +/* Backbone Peer Non-Posted Disable */ +#define INTEL_BSPR_REG_BPNPD (1 << 8) +/* Backbone Peer Posted Disable */ +#define INTEL_BSPR_REG_BPPD (1 << 9) + +/* Upstream Peer Decode Configuration Register */ +#define INTEL_UPDCR_REG 0x1114 +/* 5:0 Peer Decode Enable bits */ +#define INTEL_UPDCR_REG_MASK 0x3f + +static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) +{ + u32 rcba, bspr, updcr; + void __iomem *rcba_mem; + + /* + * Read the RCBA register from the LPC (D31:F0). PCH root ports + * are D28:F* and therefore get probed before LPC, thus we can't + * use pci_get_slot/pci_read_config_dword here. + */ + pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), + INTEL_LPC_RCBA_REG, &rcba); + if (!(rcba & INTEL_LPC_RCBA_ENABLE)) + return -EINVAL; + + rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, + PAGE_ALIGN(INTEL_UPDCR_REG)); + if (!rcba_mem) + return -ENOMEM; + + /* + * The BSPR can disallow peer cycles, but it's set by soft strap and + * therefore read-only. If both posted and non-posted peer cycles are + * disallowed, we're ok. If either are allowed, then we need to use + * the UPDCR to disable peer decodes for each port. This provides the + * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF + */ + bspr = readl(rcba_mem + INTEL_BSPR_REG); + bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; + if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { + updcr = readl(rcba_mem + INTEL_UPDCR_REG); + if (updcr & INTEL_UPDCR_REG_MASK) { + dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); + updcr &= ~INTEL_UPDCR_REG_MASK; + writel(updcr, rcba_mem + INTEL_UPDCR_REG); + } + } + + iounmap(rcba_mem); + return 0; +} + +/* Miscellaneous Port Configuration register */ +#define INTEL_MPC_REG 0xd8 +/* MPC: Invalid Receive Bus Number Check Enable */ +#define INTEL_MPC_REG_IRBNCE (1 << 26) + +static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) +{ + u32 mpc; + + /* + * When enabled, the IRBNCE bit of the MPC register enables the + * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which + * ensures that requester IDs fall within the bus number range + * of the bridge. Enable if not already. + */ + pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); + if (!(mpc & INTEL_MPC_REG_IRBNCE)) { + dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); + mpc |= INTEL_MPC_REG_IRBNCE; + pci_write_config_word(dev, INTEL_MPC_REG, mpc); + } +} + +static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) +{ + if (!pci_quirk_intel_pch_acs_match(dev)) + return -ENOTTY; + + if (pci_quirk_enable_intel_lpc_acs(dev)) { + dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); + return 0; + } + + pci_quirk_enable_intel_rp_mpc_acs(dev); + + dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; + + dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); + + return 0; +} + +static const struct pci_dev_enable_acs { + u16 vendor; + u16 device; + int (*enable_acs)(struct pci_dev *dev); +} pci_dev_enable_acs[] = { + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, + { 0 } +}; + +void pci_dev_specific_enable_acs(struct pci_dev *dev) +{ + const struct pci_dev_enable_acs *i; + int ret; + + for (i = pci_dev_enable_acs; i->enable_acs; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->enable_acs(dev); + if (ret >= 0) + return; + } + } +} |