diff options
Diffstat (limited to 'drivers/pci/probe.c')
| -rw-r--r-- | drivers/pci/probe.c | 53 |
1 files changed, 33 insertions, 20 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2a943090a3b..882bd8d29fe 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -174,14 +174,19 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); + if (!sz) + goto fail; /* BAR not implemented */ + /* * All bits set in sz means the device isn't working properly. - * If the BAR isn't implemented, all bits must be 0. If it's a - * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit - * 1 must be clear. + * If it's a memory BAR or a ROM, bit 0 must be clear; if it's + * an io BAR, bit 1 must be clear. */ - if (!sz || sz == 0xffffffff) + if (sz == 0xffffffff) { + dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n", + pos, sz); goto fail; + } /* * I don't know how l can have all bits set. Copied from old code. @@ -244,13 +249,17 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, pos, res); } } else { - sz = pci_size(l, sz, mask); + u32 size = pci_size(l, sz, mask); - if (!sz) + if (!size) { + dev_err(&dev->dev, "reg %x: invalid size " + "(l %#x sz %#x mask %#x); broken device?", + pos, l, sz, mask); goto fail; + } res->start = l; - res->end = l + sz; + res->end = l + size; dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); } @@ -312,7 +321,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [io %04lx - %04lx] reg reading\n", + " bridge window [io %#06lx-%#06lx] (disabled)\n", base, limit); } } @@ -336,7 +345,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n", + " bridge window [mem %#010lx-%#010lx] (disabled)\n", base, limit + 0xfffff); } } @@ -387,7 +396,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } else { dev_printk(KERN_DEBUG, &dev->dev, - " bridge window [mem 0x%08lx - %08lx pref] reg reading\n", + " bridge window [mem %#010lx-%#010lx pref] (disabled)\n", base, limit + 0xfffff); } } @@ -673,16 +682,20 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); u32 buses, i, j = 0; u16 bctl; + u8 primary, secondary, subordinate; int broken = 0; pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); + primary = buses & 0xFF; + secondary = (buses >> 8) & 0xFF; + subordinate = (buses >> 16) & 0xFF; - dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n", - buses & 0xffffff, pass); + dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", + secondary, subordinate, pass); /* Check if setup is sensible at all */ if (!pass && - ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) { + (primary != bus->number || secondary <= bus->number)) { dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n"); broken = 1; } @@ -693,15 +706,15 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); - if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { - unsigned int cmax, busnr; + if ((secondary || subordinate) && !pcibios_assign_all_busses() && + !is_cardbus && !broken) { + unsigned int cmax; /* * Bus already configured by firmware, process it in the first * pass and just note the configuration. */ if (pass) goto out; - busnr = (buses >> 8) & 0xFF; /* * If we already got to this bus through a different bridge, @@ -710,13 +723,13 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, * However, we continue to descend down the hierarchy and * scan remaining child buses. */ - child = pci_find_bus(pci_domain_nr(bus), busnr); + child = pci_find_bus(pci_domain_nr(bus), secondary); if (!child) { - child = pci_add_new_bus(bus, dev, busnr); + child = pci_add_new_bus(bus, dev, secondary); if (!child) goto out; - child->primary = buses & 0xFF; - child->subordinate = (buses >> 16) & 0xFF; + child->primary = primary; + child->subordinate = subordinate; child->bridge_ctl = bctl; } |