diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 2429 |
1 files changed, 1885 insertions, 544 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b714d787bdd..1c8592b0e14 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -22,6 +22,8 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/pm_runtime.h> +#include <linux/pci_hotplug.h> +#include <asm-generic/pci-bridge.h> #include <asm/setup.h> #include "pci.h" @@ -77,15 +79,26 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; + /* * The default CLS is used if arch didn't set CLS explicitly and not * all pci devices agree on the same value. Arch can override either * the dfl or actual value as it sees fit. Don't forget this is * measured in 32-bit words, not bytes. */ -u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2; +u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2; u8 pci_cache_line_size; +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + +/* If set, the PCIe ARI capability will not be used. */ +static bool pcie_ari_disabled; + /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children * @bus: pointer to PCI bus structure to search @@ -93,15 +106,15 @@ u8 pci_cache_line_size; * Given a PCI bus, returns the highest PCI bus number present in the set * including the given PCI bus and its list of child PCI buses. */ -unsigned char pci_bus_max_busnr(struct pci_bus* bus) +unsigned char pci_bus_max_busnr(struct pci_bus *bus) { - struct list_head *tmp; + struct pci_bus *tmp; unsigned char max, n; - max = bus->subordinate; - list_for_each(tmp, &bus->children) { - n = pci_bus_max_busnr(pci_bus_b(tmp)); - if(n > max) + max = bus->busn_res.end; + list_for_each_entry(tmp, &bus->children, node) { + n = pci_bus_max_busnr(tmp); + if (n > max) max = n; } return max; @@ -124,30 +137,6 @@ void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar) EXPORT_SYMBOL_GPL(pci_ioremap_bar); #endif -#if 0 -/** - * pci_max_busnr - returns maximum PCI bus number - * - * Returns the highest PCI bus number present in the system global list of - * PCI buses. - */ -unsigned char __devinit -pci_max_busnr(void) -{ - struct pci_bus *bus = NULL; - unsigned char max, n; - - max = 0; - while ((bus = pci_find_next_bus(bus)) != NULL) { - n = pci_bus_max_busnr(bus); - if(n > max) - max = n; - } - return max; -} - -#endif /* 0 */ - #define PCI_FIND_CAP_TTL 48 static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn, @@ -209,7 +198,7 @@ static int __pci_bus_find_cap_start(struct pci_bus *bus, } /** - * pci_find_capability - query for devices' capabilities + * pci_find_capability - query for devices' capabilities * @dev: PCI device to query * @cap: capability code * @@ -218,12 +207,12 @@ static int __pci_bus_find_cap_start(struct pci_bus *bus, * device's PCI configuration space or 0 in case the device does not * support it. Possible values for @cap: * - * %PCI_CAP_ID_PM Power Management - * %PCI_CAP_ID_AGP Accelerated Graphics Port - * %PCI_CAP_ID_VPD Vital Product Data - * %PCI_CAP_ID_SLOTID Slot Identification + * %PCI_CAP_ID_PM Power Management + * %PCI_CAP_ID_AGP Accelerated Graphics Port + * %PCI_CAP_ID_VPD Vital Product Data + * %PCI_CAP_ID_SLOTID Slot Identification * %PCI_CAP_ID_MSI Message Signalled Interrupts - * %PCI_CAP_ID_CHSWP CompactPCI HotSwap + * %PCI_CAP_ID_CHSWP CompactPCI HotSwap * %PCI_CAP_ID_PCIX PCI-X * %PCI_CAP_ID_EXP PCI Express */ @@ -237,15 +226,16 @@ int pci_find_capability(struct pci_dev *dev, int cap) return pos; } +EXPORT_SYMBOL(pci_find_capability); /** - * pci_bus_find_capability - query for devices' capabilities + * pci_bus_find_capability - query for devices' capabilities * @bus: the PCI bus to query * @devfn: PCI device to query * @cap: capability code * * Like pci_find_capability() but works for pci devices that do not have a - * pci_dev structure set up yet. + * pci_dev structure set up yet. * * Returns the address of the requested capability structure within the * device's PCI configuration space or 0 in case the device does not @@ -264,22 +254,20 @@ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap) return pos; } +EXPORT_SYMBOL(pci_bus_find_capability); /** - * pci_find_ext_capability - Find an extended capability + * pci_find_next_ext_capability - Find an extended capability * @dev: PCI device to query + * @start: address at which to start looking (0 to start at beginning of list) * @cap: capability code * - * Returns the address of the requested extended capability structure + * Returns the address of the next matching extended capability structure * within the device's PCI configuration space or 0 if the device does - * not support it. Possible values for @cap: - * - * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting - * %PCI_EXT_CAP_ID_VC Virtual Channel - * %PCI_EXT_CAP_ID_DSN Device Serial Number - * %PCI_EXT_CAP_ID_PWR Power Budgeting + * not support it. Some capabilities can occur several times, e.g., the + * vendor-specific capability, and this provides a way to find them all. */ -int pci_find_ext_capability(struct pci_dev *dev, int cap) +int pci_find_next_ext_capability(struct pci_dev *dev, int start, int cap) { u32 header; int ttl; @@ -291,6 +279,9 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) if (dev->cfg_size <= PCI_CFG_SPACE_SIZE) return 0; + if (start) + pos = start; + if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL) return 0; @@ -302,7 +293,7 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) return 0; while (ttl-- > 0) { - if (PCI_EXT_CAP_ID(header) == cap) + if (PCI_EXT_CAP_ID(header) == cap && pos != start) return pos; pos = PCI_EXT_CAP_NEXT(header); @@ -315,50 +306,27 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) return 0; } -EXPORT_SYMBOL_GPL(pci_find_ext_capability); +EXPORT_SYMBOL_GPL(pci_find_next_ext_capability); /** - * pci_bus_find_ext_capability - find an extended capability - * @bus: the PCI bus to query - * @devfn: PCI device to query - * @cap: capability code + * pci_find_ext_capability - Find an extended capability + * @dev: PCI device to query + * @cap: capability code * - * Like pci_find_ext_capability() but works for pci devices that do not have a - * pci_dev structure set up yet. + * Returns the address of the requested extended capability structure + * within the device's PCI configuration space or 0 if the device does + * not support it. Possible values for @cap: * - * Returns the address of the requested capability structure within the - * device's PCI configuration space or 0 in case the device does not - * support it. + * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting + * %PCI_EXT_CAP_ID_VC Virtual Channel + * %PCI_EXT_CAP_ID_DSN Device Serial Number + * %PCI_EXT_CAP_ID_PWR Power Budgeting */ -int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, - int cap) +int pci_find_ext_capability(struct pci_dev *dev, int cap) { - u32 header; - int ttl; - int pos = PCI_CFG_SPACE_SIZE; - - /* minimum 8 bytes per capability */ - ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; - - if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) - return 0; - if (header == 0xffffffff || header == 0) - return 0; - - while (ttl-- > 0) { - if (PCI_EXT_CAP_ID(header) == cap) - return pos; - - pos = PCI_EXT_CAP_NEXT(header); - if (pos < PCI_CFG_SPACE_SIZE) - break; - - if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) - break; - } - - return 0; + return pci_find_next_ext_capability(dev, 0, cap); } +EXPORT_SYMBOL_GPL(pci_find_ext_capability); static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap) { @@ -435,33 +403,67 @@ EXPORT_SYMBOL_GPL(pci_find_ht_capability); * @res: child resource record for which parent is sought * * For given resource region of given device, return the resource - * region of parent bus the given region is contained in or where - * it should be allocated from. + * region of parent bus the given region is contained in. */ -struct resource * -pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) +struct resource *pci_find_parent_resource(const struct pci_dev *dev, + struct resource *res) { const struct pci_bus *bus = dev->bus; + struct resource *r; int i; - struct resource *best = NULL, *r; pci_bus_for_each_resource(bus, r, i) { if (!r) continue; - if (res->start && !(res->start >= r->start && res->end <= r->end)) - continue; /* Not contained */ - if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM)) - continue; /* Wrong type */ - if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) - return r; /* Exact match */ - /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ - if (r->flags & IORESOURCE_PREFETCH) - continue; - /* .. but we can put a prefetchable resource inside a non-prefetchable one */ - if (!best) - best = r; + if (res->start && resource_contains(r, res)) { + + /* + * If the window is prefetchable but the BAR is + * not, the allocator made a mistake. + */ + if (r->flags & IORESOURCE_PREFETCH && + !(res->flags & IORESOURCE_PREFETCH)) + return NULL; + + /* + * If we're below a transparent bridge, there may + * be both a positively-decoded aperture and a + * subtractively-decoded region that contain the BAR. + * We want the positively-decoded one, so this depends + * on pci_bus_for_each_resource() giving us those + * first. + */ + return r; + } } - return best; + return NULL; +} +EXPORT_SYMBOL(pci_find_parent_resource); + +/** + * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos + * @dev: the PCI device to operate on + * @pos: config space offset of status word + * @mask: mask of bit(s) to care about in status word + * + * Return 1 when mask bit(s) in status word clear, 0 otherwise. + */ +int pci_wait_for_pending(struct pci_dev *dev, int pos, u16 mask) +{ + int i; + + /* Wait for Transaction Pending bit clean */ + for (i = 0; i < 4; i++) { + u16 status; + if (i) + msleep((1 << (i - 1)) * 100); + + pci_read_config_word(dev, pos, &status); + if (!(status & mask)) + return 1; + } + + return 0; } /** @@ -471,8 +473,7 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res) * Restore the BAR values for a given device, so as to make it * accessible by its driver. */ -static void -pci_restore_bars(struct pci_dev *dev) +static void pci_restore_bars(struct pci_dev *dev) { int i; @@ -485,7 +486,7 @@ static struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(struct pci_platform_pm_ops *ops) { if (!ops->is_manageable || !ops->set_state || !ops->choose_state - || !ops->sleep_wake || !ops->can_wakeup) + || !ops->sleep_wake) return -EINVAL; pci_platform_pm = ops; return 0; @@ -497,7 +498,7 @@ static inline bool platform_pci_power_manageable(struct pci_dev *dev) } static inline int platform_pci_set_power_state(struct pci_dev *dev, - pci_power_t t) + pci_power_t t) { return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; } @@ -508,11 +509,6 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; } -static inline bool platform_pci_can_wakeup(struct pci_dev *dev) -{ - return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false; -} - static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) { return pci_platform_pm ? @@ -554,13 +550,13 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) return -EINVAL; /* Validate current state: - * Can enter D0 from any state, but if we can only go deeper + * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ if (state != PCI_D0 && dev->current_state <= PCI_D3cold && dev->current_state > state) { - dev_err(&dev->dev, "invalid power transition " - "(from state %d to %d)\n", dev->current_state, state); + dev_err(&dev->dev, "invalid power transition (from state %d to %d)\n", + dev->current_state, state); return -EINVAL; } @@ -607,10 +603,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); if (dev->current_state != state && printk_ratelimit()) - dev_info(&dev->dev, "Refused to change power state, " - "currently in D%d\n", dev->current_state); + dev_info(&dev->dev, "Refused to change power state, currently in D%d\n", + dev->current_state); - /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT + /* + * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning * from D3hot to D0 _may_ perform an internal reset, thereby * going to "D0 Uninitialized" rather than "D0 Initialized". @@ -642,6 +639,16 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) if (dev->pm_cap) { u16 pmcsr; + /* + * Configuration space is not accessible for device in + * D3cold, so just keep or set D3cold for safety + */ + if (dev->current_state == PCI_D3cold) + return; + if (state == PCI_D3cold) { + dev->current_state = PCI_D3cold; + return; + } pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); } else { @@ -650,6 +657,19 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) } /** + * pci_power_up - Put the given device into D0 forcibly + * @dev: PCI device to power up + */ +void pci_power_up(struct pci_dev *dev) +{ + if (platform_pci_power_manageable(dev)) + platform_pci_set_power_state(dev, PCI_D0); + + pci_raw_set_power_state(dev, PCI_D0); + pci_update_current_state(dev, PCI_D0); +} + +/** * pci_platform_power_transition - Use platform to change device power state * @dev: PCI device to handle. * @state: State to put the device into. @@ -662,25 +682,88 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); - } else { + } else error = -ENODEV; - /* Fall back to PCI_D0 if native PM is not supported */ - if (!dev->pm_cap) - dev->current_state = PCI_D0; - } + + if (error && !dev->pm_cap) /* Fall back to PCI_D0 */ + dev->current_state = PCI_D0; return error; } /** + * pci_wakeup - Wake up a PCI device + * @pci_dev: Device to handle. + * @ign: ignored parameter + */ +static int pci_wakeup(struct pci_dev *pci_dev, void *ign) +{ + pci_wakeup_event(pci_dev); + pm_request_resume(&pci_dev->dev); + return 0; +} + +/** + * pci_wakeup_bus - Walk given bus and wake up devices on it + * @bus: Top bus of the subtree to walk. + */ +static void pci_wakeup_bus(struct pci_bus *bus) +{ + if (bus) + pci_walk_bus(bus, pci_wakeup, NULL); +} + +/** * __pci_start_power_transition - Start power transition of a PCI device * @dev: PCI device to handle. * @state: State to put the device into. */ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) { - if (state == PCI_D0) + if (state == PCI_D0) { pci_platform_power_transition(dev, PCI_D0); + /* + * Mandatory power management transition delays, see + * PCI Express Base Specification Revision 2.0 Section + * 6.6.1: Conventional Reset. Do not delay for + * devices powered on/off by corresponding bridge, + * because have already delayed for the bridge. + */ + if (dev->runtime_d3cold) { + msleep(dev->d3cold_delay); + /* + * When powering on a bridge from D3cold, the + * whole hierarchy may be powered on into + * D0uninitialized state, resume them to give + * them a chance to suspend again + */ + pci_wakeup_bus(dev->subordinate); + } + } +} + +/** + * __pci_dev_set_current_state - Set current state of a PCI device + * @dev: Device to handle + * @data: pointer to state to be set + */ +static int __pci_dev_set_current_state(struct pci_dev *dev, void *data) +{ + pci_power_t state = *(pci_power_t *)data; + + dev->current_state = state; + return 0; +} + +/** + * __pci_bus_set_current_state - Walk given bus and set current state of devices + * @bus: Top bus of the subtree to walk. + * @state: state to be set + */ +static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) +{ + if (bus) + pci_walk_bus(bus, __pci_dev_set_current_state, &state); } /** @@ -692,8 +775,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) */ int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state) { - return state >= PCI_D0 ? - pci_platform_power_transition(dev, state) : -EINVAL; + int ret; + + if (state <= PCI_D0) + return -EINVAL; + ret = pci_platform_power_transition(dev, state); + /* Power off the bridge may power off the whole hierarchy */ + if (!ret && state == PCI_D3cold) + __pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + return ret; } EXPORT_SYMBOL_GPL(__pci_complete_power_transition); @@ -717,8 +807,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) int error; /* bound the state we're entering */ - if (state > PCI_D3hot) - state = PCI_D3hot; + if (state > PCI_D3cold) + state = PCI_D3cold; else if (state < PCI_D0) state = PCI_D0; else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) @@ -729,20 +819,36 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + __pci_start_power_transition(dev, state); /* This device is quirked not to be put into D3, so don't put it in D3 */ - if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) + if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state); + /* + * To put device in D3cold, we put device into D3hot in native + * way, then put device into D3cold with platform ops + */ + error = pci_raw_set_power_state(dev, state > PCI_D3hot ? + PCI_D3hot : state); if (!__pci_complete_power_transition(dev, state)) error = 0; + /* + * When aspm_policy is "powersave" this call ensures + * that ASPM is configured. + */ + if (!error && dev->bus->self) + pcie_aspm_powersave_config_link(dev->bus->self); return error; } +EXPORT_SYMBOL(pci_set_power_state); /** * pci_choose_state - Choose the power state of a PCI device @@ -758,7 +864,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) { pci_power_t ret; - if (!pci_find_capability(dev, PCI_CAP_ID_PM)) + if (!dev->pm_cap) return PCI_D0; ret = platform_pci_choose_state(dev); @@ -781,42 +887,39 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) } return PCI_D0; } - EXPORT_SYMBOL(pci_choose_state); #define PCI_EXP_SAVE_REGS 7 -#define pcie_cap_has_devctl(type, flags) 1 -#define pcie_cap_has_lnkctl(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ - (type == PCI_EXP_TYPE_ROOT_PORT || \ - type == PCI_EXP_TYPE_ENDPOINT || \ - type == PCI_EXP_TYPE_LEG_END)) -#define pcie_cap_has_sltctl(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ - ((type == PCI_EXP_TYPE_ROOT_PORT) || \ - (type == PCI_EXP_TYPE_DOWNSTREAM && \ - (flags & PCI_EXP_FLAGS_SLOT)))) -#define pcie_cap_has_rtctl(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1 || \ - (type == PCI_EXP_TYPE_ROOT_PORT || \ - type == PCI_EXP_TYPE_RC_EC)) -#define pcie_cap_has_devctl2(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1) -#define pcie_cap_has_lnkctl2(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1) -#define pcie_cap_has_sltctl2(type, flags) \ - ((flags & PCI_EXP_FLAGS_VERS) > 1) +static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev, + u16 cap, bool extended) +{ + struct pci_cap_saved_state *tmp; + + hlist_for_each_entry(tmp, &pci_dev->saved_cap_space, next) { + if (tmp->cap.cap_extended == extended && tmp->cap.cap_nr == cap) + return tmp; + } + return NULL; +} + +struct pci_cap_saved_state *pci_find_saved_cap(struct pci_dev *dev, char cap) +{ + return _pci_find_saved_cap(dev, cap, false); +} + +struct pci_cap_saved_state *pci_find_saved_ext_cap(struct pci_dev *dev, u16 cap) +{ + return _pci_find_saved_cap(dev, cap, true); +} static int pci_save_pcie_state(struct pci_dev *dev) { - int pos, i = 0; + int i = 0; struct pci_cap_saved_state *save_state; u16 *cap; - u16 flags; - pos = pci_pcie_cap(dev); - if (!pos) + if (!pci_is_pcie(dev)) return 0; save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); @@ -824,57 +927,37 @@ static int pci_save_pcie_state(struct pci_dev *dev) dev_err(&dev->dev, "buffer not found in %s\n", __func__); return -ENOMEM; } - cap = (u16 *)&save_state->data[0]; - - pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); - - if (pcie_cap_has_devctl(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]); - if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); - if (pcie_cap_has_sltctl(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); - if (pcie_cap_has_rtctl(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); - if (pcie_cap_has_devctl2(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]); - if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]); - if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) - pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]); + + cap = (u16 *)&save_state->cap.data[0]; + pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_RTCTL, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &cap[i++]); + pcie_capability_read_word(dev, PCI_EXP_SLTCTL2, &cap[i++]); return 0; } static void pci_restore_pcie_state(struct pci_dev *dev) { - int i = 0, pos; + int i = 0; struct pci_cap_saved_state *save_state; u16 *cap; - u16 flags; save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); - pos = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (!save_state || pos <= 0) + if (!save_state) return; - cap = (u16 *)&save_state->data[0]; - - pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags); - if (pcie_cap_has_devctl(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]); - if (pcie_cap_has_lnkctl(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); - if (pcie_cap_has_sltctl(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); - if (pcie_cap_has_rtctl(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); - if (pcie_cap_has_devctl2(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]); - if (pcie_cap_has_lnkctl2(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]); - if (pcie_cap_has_sltctl2(dev->pcie_type, flags)) - pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]); + cap = (u16 *)&save_state->cap.data[0]; + pcie_capability_write_word(dev, PCI_EXP_DEVCTL, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_SLTCTL, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_RTCTL, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, cap[i++]); + pcie_capability_write_word(dev, PCI_EXP_SLTCTL2, cap[i++]); } @@ -893,7 +976,8 @@ static int pci_save_pcix_state(struct pci_dev *dev) return -ENOMEM; } - pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data); + pci_read_config_word(dev, pos + PCI_X_CMD, + (u16 *)save_state->cap.data); return 0; } @@ -908,7 +992,7 @@ static void pci_restore_pcix_state(struct pci_dev *dev) pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!save_state || pos <= 0) return; - cap = (u16 *)&save_state->data[0]; + cap = (u16 *)&save_state->cap.data[0]; pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]); } @@ -918,8 +1002,7 @@ static void pci_restore_pcix_state(struct pci_dev *dev) * pci_save_state - save the PCI configuration space of a device before suspending * @dev: - PCI device that we're dealing with */ -int -pci_save_state(struct pci_dev *dev) +int pci_save_state(struct pci_dev *dev) { int i; /* XXX: 100% dword access ok here? */ @@ -930,48 +1013,190 @@ pci_save_state(struct pci_dev *dev) return i; if ((i = pci_save_pcix_state(dev)) != 0) return i; + if ((i = pci_save_vc_state(dev)) != 0) + return i; return 0; } +EXPORT_SYMBOL(pci_save_state); + +static void pci_restore_config_dword(struct pci_dev *pdev, int offset, + u32 saved_val, int retry) +{ + u32 val; + + pci_read_config_dword(pdev, offset, &val); + if (val == saved_val) + return; + + for (;;) { + dev_dbg(&pdev->dev, "restoring config space at offset %#x (was %#x, writing %#x)\n", + offset, val, saved_val); + pci_write_config_dword(pdev, offset, saved_val); + if (retry-- <= 0) + return; + + pci_read_config_dword(pdev, offset, &val); + if (val == saved_val) + return; + + mdelay(1); + } +} + +static void pci_restore_config_space_range(struct pci_dev *pdev, + int start, int end, int retry) +{ + int index; + + for (index = end; index >= start; index--) + pci_restore_config_dword(pdev, 4 * index, + pdev->saved_config_space[index], + retry); +} -/** +static void pci_restore_config_space(struct pci_dev *pdev) +{ + if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) { + pci_restore_config_space_range(pdev, 10, 15, 0); + /* Restore BARs before the command register. */ + pci_restore_config_space_range(pdev, 4, 9, 10); + pci_restore_config_space_range(pdev, 0, 3, 0); + } else { + pci_restore_config_space_range(pdev, 0, 15, 0); + } +} + +/** * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with */ void pci_restore_state(struct pci_dev *dev) { - int i; - u32 val; - if (!dev->state_saved) return; /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); + pci_restore_ats_state(dev); + pci_restore_vc_state(dev); + + pci_restore_config_space(dev); - /* - * The Base Address register should be programmed before the command - * register(s) - */ - for (i = 15; i >= 0; i--) { - pci_read_config_dword(dev, i * 4, &val); - if (val != dev->saved_config_space[i]) { - dev_printk(KERN_DEBUG, &dev->dev, "restoring config " - "space at offset %#x (was %#x, writing %#x)\n", - i, val, (int)dev->saved_config_space[i]); - pci_write_config_dword(dev,i * 4, - dev->saved_config_space[i]); - } - } pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_iov_state(dev); dev->state_saved = false; } +EXPORT_SYMBOL(pci_restore_state); + +struct pci_saved_state { + u32 config_space[16]; + struct pci_cap_saved_data cap[0]; +}; + +/** + * pci_store_saved_state - Allocate and return an opaque struct containing + * the device saved state. + * @dev: PCI device that we're dealing with + * + * Return NULL if no state or error. + */ +struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev) +{ + struct pci_saved_state *state; + struct pci_cap_saved_state *tmp; + struct pci_cap_saved_data *cap; + size_t size; + + if (!dev->state_saved) + return NULL; + + size = sizeof(*state) + sizeof(struct pci_cap_saved_data); + + hlist_for_each_entry(tmp, &dev->saved_cap_space, next) + size += sizeof(struct pci_cap_saved_data) + tmp->cap.size; + + state = kzalloc(size, GFP_KERNEL); + if (!state) + return NULL; + + memcpy(state->config_space, dev->saved_config_space, + sizeof(state->config_space)); + + cap = state->cap; + hlist_for_each_entry(tmp, &dev->saved_cap_space, next) { + size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size; + memcpy(cap, &tmp->cap, len); + cap = (struct pci_cap_saved_data *)((u8 *)cap + len); + } + /* Empty cap_save terminates list */ + + return state; +} +EXPORT_SYMBOL_GPL(pci_store_saved_state); + +/** + * pci_load_saved_state - Reload the provided save state into struct pci_dev. + * @dev: PCI device that we're dealing with + * @state: Saved state returned from pci_store_saved_state() + */ +static int pci_load_saved_state(struct pci_dev *dev, + struct pci_saved_state *state) +{ + struct pci_cap_saved_data *cap; + + dev->state_saved = false; + + if (!state) + return 0; + + memcpy(dev->saved_config_space, state->config_space, + sizeof(state->config_space)); + + cap = state->cap; + while (cap->size) { + struct pci_cap_saved_state *tmp; + + tmp = _pci_find_saved_cap(dev, cap->cap_nr, cap->cap_extended); + if (!tmp || tmp->cap.size != cap->size) + return -EINVAL; + + memcpy(tmp->cap.data, cap->data, tmp->cap.size); + cap = (struct pci_cap_saved_data *)((u8 *)cap + + sizeof(struct pci_cap_saved_data) + cap->size); + } + + dev->state_saved = true; + return 0; +} + +/** + * pci_load_and_free_saved_state - Reload the save state pointed to by state, + * and free the memory allocated for it. + * @dev: PCI device that we're dealing with + * @state: Pointer to saved state returned from pci_store_saved_state() + */ +int pci_load_and_free_saved_state(struct pci_dev *dev, + struct pci_saved_state **state) +{ + int ret = pci_load_saved_state(dev, *state); + kfree(*state); + *state = NULL; + return ret; +} +EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state); + +int __weak pcibios_enable_device(struct pci_dev *dev, int bars) +{ + return pci_enable_resources(dev, bars); +} static int do_pci_enable_device(struct pci_dev *dev, int bars) { int err; + u16 cmd; + u8 pin; err = pci_set_power_state(dev, PCI_D0); if (err < 0 && err != -EIO) @@ -981,6 +1206,17 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) return err; pci_fixup_device(pci_fixup_enable, dev); + if (dev->msi_enabled || dev->msix_enabled) + return 0; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_INTX_DISABLE) + pci_write_config_word(dev, PCI_COMMAND, + cmd & ~PCI_COMMAND_INTX_DISABLE); + } + return 0; } @@ -997,10 +1233,33 @@ int pci_reenable_device(struct pci_dev *dev) return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1); return 0; } +EXPORT_SYMBOL(pci_reenable_device); + +static void pci_enable_bridge(struct pci_dev *dev) +{ + struct pci_dev *bridge; + int retval; + + bridge = pci_upstream_bridge(dev); + if (bridge) + pci_enable_bridge(bridge); + + if (pci_is_enabled(dev)) { + if (!dev->is_busmaster) + pci_set_master(dev); + return; + } + + retval = pci_enable_device(dev); + if (retval) + dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n", + retval); + pci_set_master(dev); +} -static int __pci_enable_device_flags(struct pci_dev *dev, - resource_size_t flags) +static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags) { + struct pci_dev *bridge; int err; int i, bars = 0; @@ -1016,10 +1275,18 @@ static int __pci_enable_device_flags(struct pci_dev *dev, dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); } - if (atomic_add_return(1, &dev->enable_cnt) > 1) + if (atomic_inc_return(&dev->enable_cnt) > 1) return 0; /* already enabled */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) + bridge = pci_upstream_bridge(dev); + if (bridge) + pci_enable_bridge(bridge); + + /* only skip sriov related */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) + if (dev->resource[i].flags & flags) + bars |= (1 << i); + for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) if (dev->resource[i].flags & flags) bars |= (1 << i); @@ -1039,8 +1306,9 @@ static int __pci_enable_device_flags(struct pci_dev *dev, */ int pci_enable_device_io(struct pci_dev *dev) { - return __pci_enable_device_flags(dev, IORESOURCE_IO); + return pci_enable_device_flags(dev, IORESOURCE_IO); } +EXPORT_SYMBOL(pci_enable_device_io); /** * pci_enable_device_mem - Initialize a device for use with Memory space @@ -1052,8 +1320,9 @@ int pci_enable_device_io(struct pci_dev *dev) */ int pci_enable_device_mem(struct pci_dev *dev) { - return __pci_enable_device_flags(dev, IORESOURCE_MEM); + return pci_enable_device_flags(dev, IORESOURCE_MEM); } +EXPORT_SYMBOL(pci_enable_device_mem); /** * pci_enable_device - Initialize device before it's used by a driver. @@ -1068,8 +1337,9 @@ int pci_enable_device_mem(struct pci_dev *dev) */ int pci_enable_device(struct pci_dev *dev) { - return __pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO); + return pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO); } +EXPORT_SYMBOL(pci_enable_device); /* * Managed PCI resources. This manages device on/off, intx/msi/msix @@ -1107,7 +1377,7 @@ static void pcim_release(struct device *gendev, void *res) pci_disable_device(dev); } -static struct pci_devres * get_pci_dr(struct pci_dev *pdev) +static struct pci_devres *get_pci_dr(struct pci_dev *pdev) { struct pci_devres *dr, *new_dr; @@ -1121,7 +1391,7 @@ static struct pci_devres * get_pci_dr(struct pci_dev *pdev) return devres_get(&pdev->dev, new_dr, NULL, NULL); } -static struct pci_devres * find_pci_dr(struct pci_dev *pdev) +static struct pci_devres *find_pci_dr(struct pci_dev *pdev) { if (pci_is_managed(pdev)) return devres_find(&pdev->dev, pcim_release, NULL, NULL); @@ -1152,6 +1422,7 @@ int pcim_enable_device(struct pci_dev *pdev) } return rc; } +EXPORT_SYMBOL(pcim_enable_device); /** * pcim_pin_device - Pin managed PCI device @@ -1170,6 +1441,30 @@ void pcim_pin_device(struct pci_dev *pdev) if (dr) dr->pinned = 1; } +EXPORT_SYMBOL(pcim_pin_device); + +/* + * pcibios_add_device - provide arch specific hooks when adding device dev + * @dev: the PCI device being added + * + * Permits the platform to provide architecture specific functionality when + * devices are added. This is the default implementation. Architecture + * implementations can override this. + */ +int __weak pcibios_add_device(struct pci_dev *dev) +{ + return 0; +} + +/** + * pcibios_release_device - provide arch specific hooks when releasing device dev + * @dev: the PCI device being released + * + * Permits the platform to provide architecture specific functionality when + * devices are released. This is the default implementation. Architecture + * implementations can override this. + */ +void __weak pcibios_release_device(struct pci_dev *dev) {} /** * pcibios_disable_device - disable arch specific PCI resources for device dev @@ -1179,7 +1474,18 @@ void pcim_pin_device(struct pci_dev *pdev) * is the default implementation. Architecture implementations can * override this. */ -void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} +void __weak pcibios_disable_device (struct pci_dev *dev) {} + +/** + * pcibios_penalize_isa_irq - penalize an ISA IRQ + * @irq: ISA IRQ to penalize + * @active: IRQ active or not + * + * Permits the platform to provide architecture-specific functionality when + * penalizing ISA IRQs. This is the default implementation. Architecture + * implementations can override this. + */ +void __weak pcibios_penalize_isa_irq(int irq, int active) {} static void do_pci_disable_device(struct pci_dev *dev) { @@ -1217,8 +1523,7 @@ void pci_disable_enabled_device(struct pci_dev *dev) * Note we don't actually disable the device until all callers of * pci_enable_device() have called pci_disable_device(). */ -void -pci_disable_device(struct pci_dev *dev) +void pci_disable_device(struct pci_dev *dev) { struct pci_devres *dr; @@ -1226,13 +1531,17 @@ pci_disable_device(struct pci_dev *dev) if (dr) dr->enabled = 0; - if (atomic_sub_return(1, &dev->enable_cnt) != 0) + dev_WARN_ONCE(&dev->dev, atomic_read(&dev->enable_cnt) <= 0, + "disabling already-disabled device"); + + if (atomic_dec_return(&dev->enable_cnt) != 0) return; do_pci_disable_device(dev); dev->is_busmaster = 0; } +EXPORT_SYMBOL(pci_disable_device); /** * pcibios_set_pcie_reset_state - set reset state for device dev @@ -1243,8 +1552,8 @@ pci_disable_device(struct pci_dev *dev) * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ -int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, - enum pcie_reset_state state) +int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state) { return -EINVAL; } @@ -1261,6 +1570,7 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) { return pcibios_set_pcie_reset_state(dev, state); } +EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); /** * pci_check_pme_status - Check if given device has generated PME. @@ -1300,13 +1610,16 @@ bool pci_check_pme_status(struct pci_dev *dev) /** * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. * @dev: Device to handle. - * @ign: Ignored. + * @pme_poll_reset: Whether or not to reset the device's pme_poll flag. * * Check if @dev has generated PME and queue a resume request for it in that * case. */ -static int pci_pme_wakeup(struct pci_dev *dev, void *ign) +static int pci_pme_wakeup(struct pci_dev *dev, void *pme_poll_reset) { + if (pme_poll_reset && dev->pme_poll) + dev->pme_poll = false; + if (pci_check_pme_status(dev)) { pci_wakeup_event(dev); pm_request_resume(&dev->dev); @@ -1321,9 +1634,10 @@ static int pci_pme_wakeup(struct pci_dev *dev, void *ign) void pci_pme_wakeup_bus(struct pci_bus *bus) { if (bus) - pci_walk_bus(bus, pci_pme_wakeup, NULL); + pci_walk_bus(bus, pci_pme_wakeup, (void *)true); } + /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. @@ -1336,34 +1650,38 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state) return !!(dev->pme_support & (1 << state)); } +EXPORT_SYMBOL(pci_pme_capable); static void pci_pme_list_scan(struct work_struct *work) { - struct pci_pme_device *pme_dev; + struct pci_pme_device *pme_dev, *n; mutex_lock(&pci_pme_list_mutex); - if (!list_empty(&pci_pme_list)) { - list_for_each_entry(pme_dev, &pci_pme_list, list) + list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) { + if (pme_dev->dev->pme_poll) { + struct pci_dev *bridge; + + bridge = pme_dev->dev->bus->self; + /* + * If bridge is in low power state, the + * configuration space of subordinate devices + * may be not accessible + */ + if (bridge && bridge->current_state != PCI_D0) + continue; pci_pme_wakeup(pme_dev->dev, NULL); - schedule_delayed_work(&pci_pme_work, msecs_to_jiffies(PME_TIMEOUT)); + } else { + list_del(&pme_dev->list); + kfree(pme_dev); + } } + if (!list_empty(&pci_pme_list)) + schedule_delayed_work(&pci_pme_work, + msecs_to_jiffies(PME_TIMEOUT)); mutex_unlock(&pci_pme_list_mutex); } /** - * pci_external_pme - is a device an external PCI PME source? - * @dev: PCI device to check - * - */ - -static bool pci_external_pme(struct pci_dev *dev) -{ - if (pci_is_pcie(dev) || dev->bus->number == 0) - return false; - return true; -} - -/** * pci_pme_active - enable or disable PCI device's PME# function * @dev: PCI device to handle. * @enable: 'true' to enable PME# generation; 'false' to disable it. @@ -1375,7 +1693,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable) { u16 pmcsr; - if (!dev->pm_cap) + if (!dev->pme_support) return; pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); @@ -1386,23 +1704,35 @@ void pci_pme_active(struct pci_dev *dev, bool enable) pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - /* PCI (as opposed to PCIe) PME requires that the device have - its PME# line hooked up correctly. Not all hardware vendors - do this, so the PME never gets delivered and the device - remains asleep. The easiest way around this is to - periodically walk the list of suspended devices and check - whether any have their PME flag set. The assumption is that - we'll wake up often enough anyway that this won't be a huge - hit, and the power savings from the devices will still be a - win. */ - - if (pci_external_pme(dev)) { + /* + * PCI (as opposed to PCIe) PME requires that the device have + * its PME# line hooked up correctly. Not all hardware vendors + * do this, so the PME never gets delivered and the device + * remains asleep. The easiest way around this is to + * periodically walk the list of suspended devices and check + * whether any have their PME flag set. The assumption is that + * we'll wake up often enough anyway that this won't be a huge + * hit, and the power savings from the devices will still be a + * win. + * + * Although PCIe uses in-band PME message instead of PME# line + * to report PME, PME does not work for some PCIe devices in + * reality. For example, there are devices that set their PME + * status bits, but don't really bother to send a PME message; + * there are PCI Express Root Ports that don't bother to + * trigger interrupts when they receive PME messages from the + * devices below. So PME poll is used for PCIe devices too. + */ + + if (dev->pme_poll) { struct pci_pme_device *pme_dev; if (enable) { pme_dev = kmalloc(sizeof(struct pci_pme_device), GFP_KERNEL); - if (!pme_dev) - goto out; + if (!pme_dev) { + dev_warn(&dev->dev, "can't enable PME#\n"); + return; + } pme_dev->dev = dev; mutex_lock(&pci_pme_list_mutex); list_add(&pme_dev->list, &pci_pme_list); @@ -1423,10 +1753,9 @@ void pci_pme_active(struct pci_dev *dev, bool enable) } } -out: - dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n", - enable ? "enabled" : "disabled"); + dev_dbg(&dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); } +EXPORT_SYMBOL(pci_pme_active); /** * __pci_enable_wake - enable PCI device as wakeup event source @@ -1512,6 +1841,7 @@ int pci_wake_from_d3(struct pci_dev *dev, bool enable) pci_enable_wake(dev, PCI_D3cold, enable) : pci_enable_wake(dev, PCI_D3hot, enable); } +EXPORT_SYMBOL(pci_wake_from_d3); /** * pci_target_state - find an appropriate low power state for a given PCI dev @@ -1521,7 +1851,7 @@ int pci_wake_from_d3(struct pci_dev *dev, bool enable) * If the platform can't manage @dev, return the deepest state from which it * can generate wake events, based on any available PME info. */ -pci_power_t pci_target_state(struct pci_dev *dev) +static pci_power_t pci_target_state(struct pci_dev *dev) { pci_power_t target_state = PCI_D3hot; @@ -1577,6 +1907,10 @@ int pci_prepare_to_sleep(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; + /* D3cold during system suspend/hibernate is not supported */ + if (target_state > PCI_D3hot) + target_state = PCI_D3hot; + pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); error = pci_set_power_state(dev, target_state); @@ -1586,6 +1920,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) return error; } +EXPORT_SYMBOL(pci_prepare_to_sleep); /** * pci_back_from_sleep - turn PCI device on during system-wide transition into working state @@ -1598,6 +1933,7 @@ int pci_back_from_sleep(struct pci_dev *dev) pci_enable_wake(dev, PCI_D0, false); return pci_set_power_state(dev, PCI_D0); } +EXPORT_SYMBOL(pci_back_from_sleep); /** * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend. @@ -1614,12 +1950,16 @@ int pci_finish_runtime_suspend(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; + dev->runtime_d3cold = target_state == PCI_D3cold; + __pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev)); error = pci_set_power_state(dev, target_state); - if (error) + if (error) { __pci_enable_wake(dev, target_state, true, false); + dev->runtime_d3cold = false; + } return error; } @@ -1628,7 +1968,7 @@ int pci_finish_runtime_suspend(struct pci_dev *dev) * pci_dev_run_wake - Check if device can generate run-time wake-up events. * @dev: Device to check. * - * Return true if the device itself is cabable of generating wake-up events + * Return true if the device itself is capable of generating wake-up events * (through the platform or using the native PCIe PME) or if the device supports * PME and one of its upstream bridges can generate wake-up events. */ @@ -1659,6 +1999,38 @@ bool pci_dev_run_wake(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_dev_run_wake); +void pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +void pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. @@ -1669,10 +2041,13 @@ void pci_pm_init(struct pci_dev *dev) u16 pmc; pm_runtime_forbid(&dev->dev); + pm_runtime_set_active(&dev->dev); + pm_runtime_enable(&dev->dev); device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; dev->pm_cap = 0; + dev->pme_support = 0; /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); @@ -1689,6 +2064,8 @@ void pci_pm_init(struct pci_dev *dev) dev->pm_cap = pm; dev->d3_delay = PCI_PM_D3_WAIT; + dev->d3cold_delay = PCI_PM_D3COLD_WAIT; + dev->d3cold_allowed = true; dev->d1_support = false; dev->d2_support = false; @@ -1714,6 +2091,7 @@ void pci_pm_init(struct pci_dev *dev) (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT; + dev->pme_poll = true; /* * Make device's PM flags reflect the wake-up capability, but * let the user space enable it to wake up the system as needed. @@ -1721,43 +2099,34 @@ void pci_pm_init(struct pci_dev *dev) device_set_wakeup_capable(&dev->dev, true); /* Disable the PME# generation functionality */ pci_pme_active(dev, false); - } else { - dev->pme_support = 0; } } -/** - * platform_pci_wakeup_init - init platform wakeup if present - * @dev: PCI device - * - * Some devices don't have PCI PM caps but can still generate wakeup - * events through platform methods (like ACPI events). If @dev supports - * platform wakeup events, set the device flag to indicate as much. This - * may be redundant if the device also supports PCI PM caps, but double - * initialization should be safe in that case. - */ -void platform_pci_wakeup_init(struct pci_dev *dev) +static void pci_add_saved_cap(struct pci_dev *pci_dev, + struct pci_cap_saved_state *new_cap) { - if (!platform_pci_can_wakeup(dev)) - return; - - device_set_wakeup_capable(&dev->dev, true); - platform_pci_sleep_wake(dev, false); + hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space); } /** - * pci_add_save_buffer - allocate buffer for saving given capability registers + * _pci_add_cap_save_buffer - allocate buffer for saving given + * capability registers * @dev: the PCI device * @cap: the capability to allocate the buffer for + * @extended: Standard or Extended capability ID * @size: requested size of the buffer */ -static int pci_add_cap_save_buffer( - struct pci_dev *dev, char cap, unsigned int size) +static int _pci_add_cap_save_buffer(struct pci_dev *dev, u16 cap, + bool extended, unsigned int size) { int pos; struct pci_cap_saved_state *save_state; - pos = pci_find_capability(dev, cap); + if (extended) + pos = pci_find_ext_capability(dev, cap); + else + pos = pci_find_capability(dev, cap); + if (pos <= 0) return 0; @@ -1765,12 +2134,24 @@ static int pci_add_cap_save_buffer( if (!save_state) return -ENOMEM; - save_state->cap_nr = cap; + save_state->cap.cap_nr = cap; + save_state->cap.cap_extended = extended; + save_state->cap.size = size; pci_add_saved_cap(dev, save_state); return 0; } +int pci_add_cap_save_buffer(struct pci_dev *dev, char cap, unsigned int size) +{ + return _pci_add_cap_save_buffer(dev, cap, false, size); +} + +int pci_add_ext_cap_save_buffer(struct pci_dev *dev, u16 cap, unsigned int size) +{ + return _pci_add_cap_save_buffer(dev, cap, true, size); +} + /** * pci_allocate_cap_save_buffers - allocate buffers for saving capabilities * @dev: the PCI device @@ -1789,43 +2170,51 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) if (error) dev_err(&dev->dev, "unable to preallocate PCI-X save buffer\n"); + + pci_allocate_vc_save_buffers(dev); +} + +void pci_free_cap_save_buffers(struct pci_dev *dev) +{ + struct pci_cap_saved_state *tmp; + struct hlist_node *n; + + hlist_for_each_entry_safe(tmp, n, &dev->saved_cap_space, next) + kfree(tmp); } /** - * pci_enable_ari - enable ARI forwarding if hardware support it + * pci_configure_ari - enable or disable ARI forwarding * @dev: the PCI device + * + * If @dev and its upstream bridge both support ARI, enable ARI in the + * bridge. Otherwise, disable ARI in the bridge. */ -void pci_enable_ari(struct pci_dev *dev) +void pci_configure_ari(struct pci_dev *dev) { - int pos; u32 cap; - u16 ctrl; struct pci_dev *bridge; - if (!pci_is_pcie(dev) || dev->devfn) - return; - - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); - if (!pos) + if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn) return; bridge = dev->bus->self; - if (!bridge || !pci_is_pcie(bridge)) + if (!bridge) return; - pos = pci_pcie_cap(bridge); - if (!pos) - return; - - pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap); + pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &cap); if (!(cap & PCI_EXP_DEVCAP2_ARI)) return; - pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl); - ctrl |= PCI_EXP_DEVCTL2_ARI; - pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl); - - bridge->ari_enabled = 1; + if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI)) { + pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2, + PCI_EXP_DEVCTL2_ARI); + bridge->ari_enabled = 1; + } else { + pcie_capability_clear_word(bridge, PCI_EXP_DEVCTL2, + PCI_EXP_DEVCTL2_ARI); + bridge->ari_enabled = 0; + } } static int pci_acs_enable; @@ -1839,24 +2228,18 @@ void pci_request_acs(void) } /** - * pci_enable_acs - enable ACS if hardware support it + * pci_std_enable_acs - enable ACS on devices using standard ACS capabilites * @dev: the PCI device */ -void pci_enable_acs(struct pci_dev *dev) +static int pci_std_enable_acs(struct pci_dev *dev) { int pos; u16 cap; u16 ctrl; - if (!pci_acs_enable) - return; - - if (!pci_is_pcie(dev)) - return; - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); if (!pos) - return; + return -ENODEV; pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap); pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl); @@ -1874,12 +2257,159 @@ void pci_enable_acs(struct pci_dev *dev) ctrl |= (cap & PCI_ACS_UF); pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl); + + return 0; +} + +/** + * pci_enable_acs - enable ACS if hardware support it + * @dev: the PCI device + */ +void pci_enable_acs(struct pci_dev *dev) +{ + if (!pci_acs_enable) + return; + + if (!pci_std_enable_acs(dev)) + return; + + pci_dev_specific_enable_acs(dev); +} + +static bool pci_acs_flags_enabled(struct pci_dev *pdev, u16 acs_flags) +{ + int pos; + u16 cap, ctrl; + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ACS); + if (!pos) + return false; + + /* + * Except for egress control, capabilities are either required + * or only required if controllable. Features missing from the + * capability field can therefore be assumed as hard-wired enabled. + */ + pci_read_config_word(pdev, pos + PCI_ACS_CAP, &cap); + acs_flags &= (cap | PCI_ACS_EC); + + pci_read_config_word(pdev, pos + PCI_ACS_CTRL, &ctrl); + return (ctrl & acs_flags) == acs_flags; +} + +/** + * pci_acs_enabled - test ACS against required flags for a given device + * @pdev: device to test + * @acs_flags: required PCI ACS flags + * + * Return true if the device supports the provided flags. Automatically + * filters out flags that are not implemented on multifunction devices. + * + * Note that this interface checks the effective ACS capabilities of the + * device rather than the actual capabilities. For instance, most single + * function endpoints are not required to support ACS because they have no + * opportunity for peer-to-peer access. We therefore return 'true' + * regardless of whether the device exposes an ACS capability. This makes + * it much easier for callers of this function to ignore the actual type + * or topology of the device when testing ACS support. + */ +bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags) +{ + int ret; + + ret = pci_dev_specific_acs_enabled(pdev, acs_flags); + if (ret >= 0) + return ret > 0; + + /* + * Conventional PCI and PCI-X devices never support ACS, either + * effectively or actually. The shared bus topology implies that + * any device on the bus can receive or snoop DMA. + */ + if (!pci_is_pcie(pdev)) + return false; + + switch (pci_pcie_type(pdev)) { + /* + * PCI/X-to-PCIe bridges are not specifically mentioned by the spec, + * but since their primary interface is PCI/X, we conservatively + * handle them as we would a non-PCIe device. + */ + case PCI_EXP_TYPE_PCIE_BRIDGE: + /* + * PCIe 3.0, 6.12.1 excludes ACS on these devices. "ACS is never + * applicable... must never implement an ACS Extended Capability...". + * This seems arbitrary, but we take a conservative interpretation + * of this statement. + */ + case PCI_EXP_TYPE_PCI_BRIDGE: + case PCI_EXP_TYPE_RC_EC: + return false; + /* + * PCIe 3.0, 6.12.1.1 specifies that downstream and root ports should + * implement ACS in order to indicate their peer-to-peer capabilities, + * regardless of whether they are single- or multi-function devices. + */ + case PCI_EXP_TYPE_DOWNSTREAM: + case PCI_EXP_TYPE_ROOT_PORT: + return pci_acs_flags_enabled(pdev, acs_flags); + /* + * PCIe 3.0, 6.12.1.2 specifies ACS capabilities that should be + * implemented by the remaining PCIe types to indicate peer-to-peer + * capabilities, but only when they are part of a multifunction + * device. The footnote for section 6.12 indicates the specific + * PCIe types included here. + */ + case PCI_EXP_TYPE_ENDPOINT: + case PCI_EXP_TYPE_UPSTREAM: + case PCI_EXP_TYPE_LEG_END: + case PCI_EXP_TYPE_RC_END: + if (!pdev->multifunction) + break; + + return pci_acs_flags_enabled(pdev, acs_flags); + } + + /* + * PCIe 3.0, 6.12.1.3 specifies no ACS capabilities are applicable + * to single function devices with the exception of downstream ports. + */ + return true; +} + +/** + * pci_acs_path_enable - test ACS flags from start to end in a hierarchy + * @start: starting downstream device + * @end: ending upstream device or NULL to search to the root bus + * @acs_flags: required flags + * + * Walk up a device tree from start to end testing PCI ACS support. If + * any step along the way does not support the required flags, return false. + */ +bool pci_acs_path_enabled(struct pci_dev *start, + struct pci_dev *end, u16 acs_flags) +{ + struct pci_dev *pdev, *parent = start; + + do { + pdev = parent; + + if (!pci_acs_enabled(pdev, acs_flags)) + return false; + + if (pci_is_root_bus(pdev->bus)) + return (end == NULL); + + parent = pdev->bus->self; + } while (pdev != end); + + return true; } /** * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge * @dev: the PCI device - * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD) + * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD) * * Perform INTx swizzling for a device behind one level of bridge. This is * required by section 9.1 of the PCI-to-PCI bridge specification for devices @@ -1887,7 +2417,7 @@ void pci_enable_acs(struct pci_dev *dev) * number is always 0 (see the Implementation Note in section 2.2.8.1 of * the PCI Express Base Specification, Revision 2.1) */ -u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) +u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin) { int slot; @@ -1899,8 +2429,7 @@ u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin) return (((pin - 1) + slot) % 4) + 1; } -int -pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge) +int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge) { u8 pin; @@ -1962,6 +2491,7 @@ void pci_release_region(struct pci_dev *pdev, int bar) if (dr) dr->region_mask &= ~(1 << bar); } +EXPORT_SYMBOL(pci_release_region); /** * __pci_request_region - Reserved PCI I/O and memory resource @@ -1977,25 +2507,24 @@ void pci_release_region(struct pci_dev *pdev, int bar) * * If @exclusive is set, then the region is marked so that userspace * is explicitly not allowed to map the resource via /dev/mem or - * sysfs MMIO access. + * sysfs MMIO access. * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ -static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name, - int exclusive) +static int __pci_request_region(struct pci_dev *pdev, int bar, + const char *res_name, int exclusive) { struct pci_devres *dr; if (pci_resource_len(pdev, bar) == 0) return 0; - + if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) { if (!request_region(pci_resource_start(pdev, bar), pci_resource_len(pdev, bar), res_name)) goto err_out; - } - else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) { + } else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) { if (!__request_mem_region(pci_resource_start(pdev, bar), pci_resource_len(pdev, bar), res_name, exclusive)) @@ -2032,6 +2561,7 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) { return __pci_request_region(pdev, bar, res_name, 0); } +EXPORT_SYMBOL(pci_request_region); /** * pci_request_region_exclusive - Reserved PCI I/O and memory resource @@ -2049,12 +2579,15 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name) * * The key difference that _exclusive makes it that userspace is * explicitly not allowed to map the resource via /dev/mem or - * sysfs. + * sysfs. */ -int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name) +int pci_request_region_exclusive(struct pci_dev *pdev, int bar, + const char *res_name) { return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE); } +EXPORT_SYMBOL(pci_request_region_exclusive); + /** * pci_release_selected_regions - Release selected PCI I/O and memory resources * @pdev: PCI device whose resources were previously reserved @@ -2071,9 +2604,10 @@ void pci_release_selected_regions(struct pci_dev *pdev, int bars) if (bars & (1 << i)) pci_release_region(pdev, i); } +EXPORT_SYMBOL(pci_release_selected_regions); -int __pci_request_selected_regions(struct pci_dev *pdev, int bars, - const char *res_name, int excl) +static int __pci_request_selected_regions(struct pci_dev *pdev, int bars, + const char *res_name, int excl) { int i; @@ -2084,7 +2618,7 @@ int __pci_request_selected_regions(struct pci_dev *pdev, int bars, return 0; err_out: - while(--i >= 0) + while (--i >= 0) if (bars & (1 << i)) pci_release_region(pdev, i); @@ -2103,13 +2637,15 @@ int pci_request_selected_regions(struct pci_dev *pdev, int bars, { return __pci_request_selected_regions(pdev, bars, res_name, 0); } +EXPORT_SYMBOL(pci_request_selected_regions); -int pci_request_selected_regions_exclusive(struct pci_dev *pdev, - int bars, const char *res_name) +int pci_request_selected_regions_exclusive(struct pci_dev *pdev, int bars, + const char *res_name) { return __pci_request_selected_regions(pdev, bars, res_name, IORESOURCE_EXCLUSIVE); } +EXPORT_SYMBOL(pci_request_selected_regions_exclusive); /** * pci_release_regions - Release reserved PCI I/O and memory resources @@ -2124,6 +2660,7 @@ void pci_release_regions(struct pci_dev *pdev) { pci_release_selected_regions(pdev, (1 << 6) - 1); } +EXPORT_SYMBOL(pci_release_regions); /** * pci_request_regions - Reserved PCI I/O and memory resources @@ -2142,6 +2679,7 @@ int pci_request_regions(struct pci_dev *pdev, const char *res_name) { return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name); } +EXPORT_SYMBOL(pci_request_regions); /** * pci_request_regions_exclusive - Reserved PCI I/O and memory resources @@ -2154,7 +2692,7 @@ int pci_request_regions(struct pci_dev *pdev, const char *res_name) * successfully. * * pci_request_regions_exclusive() will mark the region so that - * /dev/mem and the sysfs MMIO access will not be allowed. + * /dev/mem and the sysfs MMIO access will not be allowed. * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. @@ -2164,6 +2702,7 @@ int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name) return pci_request_selected_regions_exclusive(pdev, ((1 << 6) - 1), res_name); } +EXPORT_SYMBOL(pci_request_regions_exclusive); static void __pci_set_master(struct pci_dev *dev, bool enable) { @@ -2183,6 +2722,45 @@ static void __pci_set_master(struct pci_dev *dev, bool enable) } /** + * pcibios_setup - process "pci=" kernel boot arguments + * @str: string used to pass in "pci=" kernel boot arguments + * + * Process kernel boot arguments. This is the default implementation. + * Architecture specific implementations can override this as necessary. + */ +char * __weak __init pcibios_setup(char *str) +{ + return str; +} + +/** + * pcibios_set_master - enable PCI bus-mastering for device dev + * @dev: the PCI device to enable + * + * Enables PCI bus-mastering for the device. This is the default + * implementation. Architecture specific implementations can override + * this if necessary. + */ +void __weak pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + + /* The latency timer doesn't apply to PCIe (either Type 0 or Type 1) */ + if (pci_is_pcie(dev)) + return; + + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +/** * pci_set_master - enables bus-mastering for device dev * @dev: the PCI device to enable * @@ -2194,6 +2772,7 @@ void pci_set_master(struct pci_dev *dev) __pci_set_master(dev, true); pcibios_set_master(dev); } +EXPORT_SYMBOL(pci_set_master); /** * pci_clear_master - disables bus-mastering for device dev @@ -2203,6 +2782,7 @@ void pci_clear_master(struct pci_dev *dev) { __pci_set_master(dev, false); } +EXPORT_SYMBOL(pci_clear_master); /** * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed @@ -2235,30 +2815,13 @@ int pci_set_cacheline_size(struct pci_dev *dev) if (cacheline_size == pci_cache_line_size) return 0; - dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not " - "supported\n", pci_cache_line_size << 2); + dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not supported\n", + pci_cache_line_size << 2); return -EINVAL; } EXPORT_SYMBOL_GPL(pci_set_cacheline_size); -#ifdef PCI_DISABLE_MWI -int pci_set_mwi(struct pci_dev *dev) -{ - return 0; -} - -int pci_try_set_mwi(struct pci_dev *dev) -{ - return 0; -} - -void pci_clear_mwi(struct pci_dev *dev) -{ -} - -#else - /** * pci_set_mwi - enables memory-write-invalidate PCI transaction * @dev: the PCI device for which MWI is enabled @@ -2267,9 +2830,11 @@ void pci_clear_mwi(struct pci_dev *dev) * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ -int -pci_set_mwi(struct pci_dev *dev) +int pci_set_mwi(struct pci_dev *dev) { +#ifdef PCI_DISABLE_MWI + return 0; +#else int rc; u16 cmd; @@ -2278,14 +2843,15 @@ pci_set_mwi(struct pci_dev *dev) return rc; pci_read_config_word(dev, PCI_COMMAND, &cmd); - if (! (cmd & PCI_COMMAND_INVALIDATE)) { + if (!(cmd & PCI_COMMAND_INVALIDATE)) { dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n"); cmd |= PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); } - return 0; +#endif } +EXPORT_SYMBOL(pci_set_mwi); /** * pci_try_set_mwi - enables memory-write-invalidate PCI transaction @@ -2298,9 +2864,13 @@ pci_set_mwi(struct pci_dev *dev) */ int pci_try_set_mwi(struct pci_dev *dev) { - int rc = pci_set_mwi(dev); - return rc; +#ifdef PCI_DISABLE_MWI + return 0; +#else + return pci_set_mwi(dev); +#endif } +EXPORT_SYMBOL(pci_try_set_mwi); /** * pci_clear_mwi - disables Memory-Write-Invalidate for device dev @@ -2308,9 +2878,9 @@ int pci_try_set_mwi(struct pci_dev *dev) * * Disables PCI Memory-Write-Invalidate transaction on the device */ -void -pci_clear_mwi(struct pci_dev *dev) +void pci_clear_mwi(struct pci_dev *dev) { +#ifndef PCI_DISABLE_MWI u16 cmd; pci_read_config_word(dev, PCI_COMMAND, &cmd); @@ -2318,8 +2888,9 @@ pci_clear_mwi(struct pci_dev *dev) cmd &= ~PCI_COMMAND_INVALIDATE; pci_write_config_word(dev, PCI_COMMAND, cmd); } +#endif } -#endif /* ! PCI_DISABLE_MWI */ +EXPORT_SYMBOL(pci_clear_mwi); /** * pci_intx - enables/disables PCI INTx for device dev @@ -2328,18 +2899,16 @@ pci_clear_mwi(struct pci_dev *dev) * * Enables/disables PCI INTx for device dev */ -void -pci_intx(struct pci_dev *pdev, int enable) +void pci_intx(struct pci_dev *pdev, int enable) { u16 pci_command, new; pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - if (enable) { + if (enable) new = pci_command & ~PCI_COMMAND_INTX_DISABLE; - } else { + else new = pci_command | PCI_COMMAND_INTX_DISABLE; - } if (new != pci_command) { struct pci_devres *dr; @@ -2353,20 +2922,139 @@ pci_intx(struct pci_dev *pdev, int enable) } } } +EXPORT_SYMBOL_GPL(pci_intx); + +/** + * pci_intx_mask_supported - probe for INTx masking support + * @dev: the PCI device to operate on + * + * Check if the device dev support INTx masking via the config space + * command word. + */ +bool pci_intx_mask_supported(struct pci_dev *dev) +{ + bool mask_supported = false; + u16 orig, new; + + if (dev->broken_intx_masking) + return false; + + pci_cfg_access_lock(dev); + + pci_read_config_word(dev, PCI_COMMAND, &orig); + pci_write_config_word(dev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(dev, PCI_COMMAND, &new); + + /* + * There's no way to protect against hardware bugs or detect them + * reliably, but as long as we know what the value should be, let's + * go ahead and check it. + */ + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + dev_err(&dev->dev, "Command register changed from 0x%x to 0x%x: driver or hardware bug?\n", + orig, new); + } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) { + mask_supported = true; + pci_write_config_word(dev, PCI_COMMAND, orig); + } + + pci_cfg_access_unlock(dev); + return mask_supported; +} +EXPORT_SYMBOL_GPL(pci_intx_mask_supported); + +static bool pci_check_and_set_intx_mask(struct pci_dev *dev, bool mask) +{ + struct pci_bus *bus = dev->bus; + bool mask_updated = true; + u32 cmd_status_dword; + u16 origcmd, newcmd; + unsigned long flags; + bool irq_pending; + + /* + * We do a single dword read to retrieve both command and status. + * Document assumptions that make this possible. + */ + BUILD_BUG_ON(PCI_COMMAND % 4); + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS); + + raw_spin_lock_irqsave(&pci_lock, flags); + + bus->ops->read(bus, dev->devfn, PCI_COMMAND, 4, &cmd_status_dword); + + irq_pending = (cmd_status_dword >> 16) & PCI_STATUS_INTERRUPT; + + /* + * Check interrupt status register to see whether our device + * triggered the interrupt (when masking) or the next IRQ is + * already pending (when unmasking). + */ + if (mask != irq_pending) { + mask_updated = false; + goto done; + } + + origcmd = cmd_status_dword; + newcmd = origcmd & ~PCI_COMMAND_INTX_DISABLE; + if (mask) + newcmd |= PCI_COMMAND_INTX_DISABLE; + if (newcmd != origcmd) + bus->ops->write(bus, dev->devfn, PCI_COMMAND, 2, newcmd); + +done: + raw_spin_unlock_irqrestore(&pci_lock, flags); + + return mask_updated; +} /** - * pci_msi_off - disables any msi or msix capabilities + * pci_check_and_mask_intx - mask INTx on pending interrupt * @dev: the PCI device to operate on * - * If you want to use msi see pci_enable_msi and friends. - * This is a lower level primitive that allows us to disable - * msi operation at the device level. + * Check if the device dev has its INTx line asserted, mask it and + * return true in that case. False is returned if not interrupt was + * pending. + */ +bool pci_check_and_mask_intx(struct pci_dev *dev) +{ + return pci_check_and_set_intx_mask(dev, true); +} +EXPORT_SYMBOL_GPL(pci_check_and_mask_intx); + +/** + * pci_check_and_unmask_intx - unmask INTx if no interrupt is pending + * @dev: the PCI device to operate on + * + * Check if the device dev has its INTx line asserted, unmask it if not + * and return true. False is returned and the mask remains active if + * there was still an interrupt pending. + */ +bool pci_check_and_unmask_intx(struct pci_dev *dev) +{ + return pci_check_and_set_intx_mask(dev, false); +} +EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx); + +/** + * pci_msi_off - disables any MSI or MSI-X capabilities + * @dev: the PCI device to operate on + * + * If you want to use MSI, see pci_enable_msi() and friends. + * This is a lower-level primitive that allows us to disable + * MSI operation at the device level. */ void pci_msi_off(struct pci_dev *dev) { int pos; u16 control; + /* + * This looks like it could go in msi.c, but we need it even when + * CONFIG_PCI_MSI=n. For the same reason, we can't use + * dev->msi_cap or dev->msix_cap here. + */ pos = pci_find_capability(dev, PCI_CAP_ID_MSI); if (pos) { pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); @@ -2394,41 +3082,37 @@ int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask) } EXPORT_SYMBOL(pci_set_dma_seg_boundary); +/** + * pci_wait_for_pending_transaction - waits for pending transaction + * @dev: the PCI device to operate on + * + * Return 0 if transaction is pending 1 otherwise. + */ +int pci_wait_for_pending_transaction(struct pci_dev *dev) +{ + if (!pci_is_pcie(dev)) + return 1; + + return pci_wait_for_pending(dev, pci_pcie_cap(dev) + PCI_EXP_DEVSTA, + PCI_EXP_DEVSTA_TRPND); +} +EXPORT_SYMBOL(pci_wait_for_pending_transaction); + static int pcie_flr(struct pci_dev *dev, int probe) { - int i; - int pos; u32 cap; - u16 status, control; - - pos = pci_pcie_cap(dev); - if (!pos) - return -ENOTTY; - pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap); + pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap); if (!(cap & PCI_EXP_DEVCAP_FLR)) return -ENOTTY; if (probe) return 0; - /* Wait for Transaction Pending bit clean */ - for (i = 0; i < 4; i++) { - if (i) - msleep((1 << (i - 1)) * 100); - - pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status); - if (!(status & PCI_EXP_DEVSTA_TRPND)) - goto clear; - } + if (!pci_wait_for_pending_transaction(dev)) + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); - dev_err(&dev->dev, "transaction is not cleared; " - "proceeding with reset anyway\n"); - -clear: - pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control); - control |= PCI_EXP_DEVCTL_BCR_FLR; - pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control); + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); msleep(100); @@ -2437,10 +3121,8 @@ clear: static int pci_af_flr(struct pci_dev *dev, int probe) { - int i; int pos; u8 cap; - u8 status; pos = pci_find_capability(dev, PCI_CAP_ID_AF); if (!pos) @@ -2453,18 +3135,16 @@ static int pci_af_flr(struct pci_dev *dev, int probe) if (probe) return 0; - /* Wait for Transaction Pending bit clean */ - for (i = 0; i < 4; i++) { - if (i) - msleep((1 << (i - 1)) * 100); - - pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status); - if (!(status & PCI_AF_STATUS_TP)) - goto clear; - } + /* + * Wait for Transaction Pending bit to clear. A word-aligned test + * is used, so we use the conrol offset rather than status and shift + * the test bit to match. + */ + if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL, + PCI_AF_STATUS_TP << 8)) + goto clear; - dev_err(&dev->dev, "transaction is not cleared; " - "proceeding with reset anyway\n"); + dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); clear: pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); @@ -2473,6 +3153,21 @@ clear: return 0; } +/** + * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0. + * @dev: Device to reset. + * @probe: If set, only check if the device can be reset this way. + * + * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is + * unset, it will be reinitialized internally when going from PCI_D3hot to + * PCI_D0. If that's the case and the device is not in a low-power state + * already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset. + * + * NOTE: This causes the caller to sleep for twice the device power transition + * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms + * by default (i.e. unless the @dev's d3_delay field has a different value). + * Moreover, only devices in D0 can be reset by this function. + */ static int pci_pm_reset(struct pci_dev *dev, int probe) { u16 csr; @@ -2503,9 +3198,47 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return 0; } -static int pci_parent_bus_reset(struct pci_dev *dev, int probe) +void __weak pcibios_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; + + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + /* + * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms. Double + * this to 2ms to ensure that we meet the minimum requirement. + */ + msleep(2); + + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + + /* + * Trhfa for conventional PCI is 2^25 clock cycles. + * Assuming a minimum 33MHz clock this results in a 1s + * delay before we can consider subordinate devices to + * be re-initialized. PCIe has some ways to shorten this, + * but we don't make use of them yet. + */ + ssleep(1); +} + +/** + * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge. + * @dev: Bridge device + * + * Use the bridge control register to assert reset on the secondary bus. + * Devices on the secondary bus are left in power-on state. + */ +void pci_reset_bridge_secondary_bus(struct pci_dev *dev) +{ + pcibios_reset_secondary_bus(dev); +} +EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus); + +static int pci_parent_bus_reset(struct pci_dev *dev, int probe) +{ struct pci_dev *pdev; if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self) @@ -2518,30 +3251,46 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe) if (probe) return 0; - pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl); - ctrl |= PCI_BRIDGE_CTL_BUS_RESET; - pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); - msleep(100); - - ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; - pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl); - msleep(100); + pci_reset_bridge_secondary_bus(dev->bus->self); return 0; } -static int pci_dev_reset(struct pci_dev *dev, int probe) +static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe) +{ + int rc = -ENOTTY; + + if (!hotplug || !try_module_get(hotplug->ops->owner)) + return rc; + + if (hotplug->ops->reset_slot) + rc = hotplug->ops->reset_slot(hotplug, probe); + + module_put(hotplug->ops->owner); + + return rc; +} + +static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe) +{ + struct pci_dev *pdev; + + if (dev->subordinate || !dev->slot) + return -ENOTTY; + + list_for_each_entry(pdev, &dev->bus->devices, bus_list) + if (pdev != dev && pdev->slot == dev->slot) + return -ENOTTY; + + return pci_reset_hotplug_slot(dev->slot->hotplug, probe); +} + +static int __pci_dev_reset(struct pci_dev *dev, int probe) { int rc; might_sleep(); - if (!probe) { - pci_block_user_cfg_access(dev); - /* block PM suspend, driver probe, etc. */ - device_lock(&dev->dev); - } - rc = pci_dev_specific_reset(dev, probe); if (rc != -ENOTTY) goto done; @@ -2558,13 +3307,97 @@ static int pci_dev_reset(struct pci_dev *dev, int probe) if (rc != -ENOTTY) goto done; + rc = pci_dev_reset_slot_function(dev, probe); + if (rc != -ENOTTY) + goto done; + rc = pci_parent_bus_reset(dev, probe); done: - if (!probe) { - device_unlock(&dev->dev); - pci_unblock_user_cfg_access(dev); + return rc; +} + +static void pci_dev_lock(struct pci_dev *dev) +{ + pci_cfg_access_lock(dev); + /* block PM suspend, driver probe, etc. */ + device_lock(&dev->dev); +} + +/* Return 1 on successful lock, 0 on contention */ +static int pci_dev_trylock(struct pci_dev *dev) +{ + if (pci_cfg_access_trylock(dev)) { + if (device_trylock(&dev->dev)) + return 1; + pci_cfg_access_unlock(dev); } + return 0; +} + +static void pci_dev_unlock(struct pci_dev *dev) +{ + device_unlock(&dev->dev); + pci_cfg_access_unlock(dev); +} + +/** + * pci_reset_notify - notify device driver of reset + * @dev: device to be notified of reset + * @prepare: 'true' if device is about to be reset; 'false' if reset attempt + * completed + * + * Must be called prior to device access being disabled and after device + * access is restored. + */ +static void pci_reset_notify(struct pci_dev *dev, bool prepare) +{ + const struct pci_error_handlers *err_handler = + dev->driver ? dev->driver->err_handler : NULL; + if (err_handler && err_handler->reset_notify) + err_handler->reset_notify(dev, prepare); +} + +static void pci_dev_save_and_disable(struct pci_dev *dev) +{ + pci_reset_notify(dev, true); + + /* + * Wake-up device prior to save. PM registers default to D0 after + * reset and a simple register restore doesn't reliably return + * to a non-D0 state anyway. + */ + pci_set_power_state(dev, PCI_D0); + + pci_save_state(dev); + /* + * Disable the device by clearing the Command register, except for + * INTx-disable which is set. This not only disables MMIO and I/O port + * BARs, but also prevents the device from being Bus Master, preventing + * DMA from the device including MSI/MSI-X interrupts. For PCI 2.3 + * compliant devices, INTx-disable prevents legacy interrupts. + */ + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); +} + +static void pci_dev_restore(struct pci_dev *dev) +{ + pci_restore_state(dev); + pci_reset_notify(dev, false); +} + +static int pci_dev_reset(struct pci_dev *dev, int probe) +{ + int rc; + + if (!probe) + pci_dev_lock(dev); + + rc = __pci_dev_reset(dev, probe); + + if (!probe) + pci_dev_unlock(dev); + return rc; } @@ -2592,6 +3425,31 @@ int __pci_reset_function(struct pci_dev *dev) EXPORT_SYMBOL_GPL(__pci_reset_function); /** + * __pci_reset_function_locked - reset a PCI device function while holding + * the @dev mutex lock. + * @dev: PCI device to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * The device function is presumed to be unused and the caller is holding + * the device mutex lock when this function is called. + * Resetting the device will make the contents of PCI configuration space + * random, so any caller of this must be prepared to reinitialise the + * device including MSI, bus mastering, BARs, decoding IO and memory spaces, + * etc. + * + * Returns 0 if the device function was successfully reset or negative if the + * device doesn't support resetting a single function. + */ +int __pci_reset_function_locked(struct pci_dev *dev) +{ + return __pci_dev_reset(dev, 0); +} +EXPORT_SYMBOL_GPL(__pci_reset_function_locked); + +/** * pci_probe_reset_function - check whether the device can be safely reset * @dev: PCI device to reset * @@ -2631,23 +3489,393 @@ int pci_reset_function(struct pci_dev *dev) if (rc) return rc; - pci_save_state(dev); - - /* - * both INTx and MSI are disabled after the Interrupt Disable bit - * is set and the Bus Master bit is cleared. - */ - pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); + pci_dev_save_and_disable(dev); rc = pci_dev_reset(dev, 0); - pci_restore_state(dev); + pci_dev_restore(dev); return rc; } EXPORT_SYMBOL_GPL(pci_reset_function); /** + * pci_try_reset_function - quiesce and reset a PCI device function + * @dev: PCI device to reset + * + * Same as above, except return -EAGAIN if unable to lock device. + */ +int pci_try_reset_function(struct pci_dev *dev) +{ + int rc; + + rc = pci_dev_reset(dev, 1); + if (rc) + return rc; + + pci_dev_save_and_disable(dev); + + if (pci_dev_trylock(dev)) { + rc = __pci_dev_reset(dev, 0); + pci_dev_unlock(dev); + } else + rc = -EAGAIN; + + pci_dev_restore(dev); + + return rc; +} +EXPORT_SYMBOL_GPL(pci_try_reset_function); + +/* Lock devices from the top of the tree down */ +static void pci_bus_lock(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_lock(dev); + if (dev->subordinate) + pci_bus_lock(dev->subordinate); + } +} + +/* Unlock devices from the bottom of the tree up */ +static void pci_bus_unlock(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->subordinate) + pci_bus_unlock(dev->subordinate); + pci_dev_unlock(dev); + } +} + +/* Return 1 on successful lock, 0 on contention */ +static int pci_bus_trylock(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + if (!pci_dev_trylock(dev)) + goto unlock; + if (dev->subordinate) { + if (!pci_bus_trylock(dev->subordinate)) { + pci_dev_unlock(dev); + goto unlock; + } + } + } + return 1; + +unlock: + list_for_each_entry_continue_reverse(dev, &bus->devices, bus_list) { + if (dev->subordinate) + pci_bus_unlock(dev->subordinate); + pci_dev_unlock(dev); + } + return 0; +} + +/* Lock devices from the top of the tree down */ +static void pci_slot_lock(struct pci_slot *slot) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + pci_dev_lock(dev); + if (dev->subordinate) + pci_bus_lock(dev->subordinate); + } +} + +/* Unlock devices from the bottom of the tree up */ +static void pci_slot_unlock(struct pci_slot *slot) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + if (dev->subordinate) + pci_bus_unlock(dev->subordinate); + pci_dev_unlock(dev); + } +} + +/* Return 1 on successful lock, 0 on contention */ +static int pci_slot_trylock(struct pci_slot *slot) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + if (!pci_dev_trylock(dev)) + goto unlock; + if (dev->subordinate) { + if (!pci_bus_trylock(dev->subordinate)) { + pci_dev_unlock(dev); + goto unlock; + } + } + } + return 1; + +unlock: + list_for_each_entry_continue_reverse(dev, + &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + if (dev->subordinate) + pci_bus_unlock(dev->subordinate); + pci_dev_unlock(dev); + } + return 0; +} + +/* Save and disable devices from the top of the tree down */ +static void pci_bus_save_and_disable(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_save_and_disable(dev); + if (dev->subordinate) + pci_bus_save_and_disable(dev->subordinate); + } +} + +/* + * Restore devices from top of the tree down - parent bridges need to be + * restored before we can get to subordinate devices. + */ +static void pci_bus_restore(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_restore(dev); + if (dev->subordinate) + pci_bus_restore(dev->subordinate); + } +} + +/* Save and disable devices from the top of the tree down */ +static void pci_slot_save_and_disable(struct pci_slot *slot) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + pci_dev_save_and_disable(dev); + if (dev->subordinate) + pci_bus_save_and_disable(dev->subordinate); + } +} + +/* + * Restore devices from top of the tree down - parent bridges need to be + * restored before we can get to subordinate devices. + */ +static void pci_slot_restore(struct pci_slot *slot) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &slot->bus->devices, bus_list) { + if (!dev->slot || dev->slot != slot) + continue; + pci_dev_restore(dev); + if (dev->subordinate) + pci_bus_restore(dev->subordinate); + } +} + +static int pci_slot_reset(struct pci_slot *slot, int probe) +{ + int rc; + + if (!slot) + return -ENOTTY; + + if (!probe) + pci_slot_lock(slot); + + might_sleep(); + + rc = pci_reset_hotplug_slot(slot->hotplug, probe); + + if (!probe) + pci_slot_unlock(slot); + + return rc; +} + +/** + * pci_probe_reset_slot - probe whether a PCI slot can be reset + * @slot: PCI slot to probe + * + * Return 0 if slot can be reset, negative if a slot reset is not supported. + */ +int pci_probe_reset_slot(struct pci_slot *slot) +{ + return pci_slot_reset(slot, 1); +} +EXPORT_SYMBOL_GPL(pci_probe_reset_slot); + +/** + * pci_reset_slot - reset a PCI slot + * @slot: PCI slot to reset + * + * A PCI bus may host multiple slots, each slot may support a reset mechanism + * independent of other slots. For instance, some slots may support slot power + * control. In the case of a 1:1 bus to slot architecture, this function may + * wrap the bus reset to avoid spurious slot related events such as hotplug. + * Generally a slot reset should be attempted before a bus reset. All of the + * function of the slot and any subordinate buses behind the slot are reset + * through this function. PCI config space of all devices in the slot and + * behind the slot is saved before and restored after reset. + * + * Return 0 on success, non-zero on error. + */ +int pci_reset_slot(struct pci_slot *slot) +{ + int rc; + + rc = pci_slot_reset(slot, 1); + if (rc) + return rc; + + pci_slot_save_and_disable(slot); + + rc = pci_slot_reset(slot, 0); + + pci_slot_restore(slot); + + return rc; +} +EXPORT_SYMBOL_GPL(pci_reset_slot); + +/** + * pci_try_reset_slot - Try to reset a PCI slot + * @slot: PCI slot to reset + * + * Same as above except return -EAGAIN if the slot cannot be locked + */ +int pci_try_reset_slot(struct pci_slot *slot) +{ + int rc; + + rc = pci_slot_reset(slot, 1); + if (rc) + return rc; + + pci_slot_save_and_disable(slot); + + if (pci_slot_trylock(slot)) { + might_sleep(); + rc = pci_reset_hotplug_slot(slot->hotplug, 0); + pci_slot_unlock(slot); + } else + rc = -EAGAIN; + + pci_slot_restore(slot); + + return rc; +} +EXPORT_SYMBOL_GPL(pci_try_reset_slot); + +static int pci_bus_reset(struct pci_bus *bus, int probe) +{ + if (!bus->self) + return -ENOTTY; + + if (probe) + return 0; + + pci_bus_lock(bus); + + might_sleep(); + + pci_reset_bridge_secondary_bus(bus->self); + + pci_bus_unlock(bus); + + return 0; +} + +/** + * pci_probe_reset_bus - probe whether a PCI bus can be reset + * @bus: PCI bus to probe + * + * Return 0 if bus can be reset, negative if a bus reset is not supported. + */ +int pci_probe_reset_bus(struct pci_bus *bus) +{ + return pci_bus_reset(bus, 1); +} +EXPORT_SYMBOL_GPL(pci_probe_reset_bus); + +/** + * pci_reset_bus - reset a PCI bus + * @bus: top level PCI bus to reset + * + * Do a bus reset on the given bus and any subordinate buses, saving + * and restoring state of all devices. + * + * Return 0 on success, non-zero on error. + */ +int pci_reset_bus(struct pci_bus *bus) +{ + int rc; + + rc = pci_bus_reset(bus, 1); + if (rc) + return rc; + + pci_bus_save_and_disable(bus); + + rc = pci_bus_reset(bus, 0); + + pci_bus_restore(bus); + + return rc; +} +EXPORT_SYMBOL_GPL(pci_reset_bus); + +/** + * pci_try_reset_bus - Try to reset a PCI bus + * @bus: top level PCI bus to reset + * + * Same as above except return -EAGAIN if the bus cannot be locked + */ +int pci_try_reset_bus(struct pci_bus *bus) +{ + int rc; + + rc = pci_bus_reset(bus, 1); + if (rc) + return rc; + + pci_bus_save_and_disable(bus); + + if (pci_bus_trylock(bus)) { + might_sleep(); + pci_reset_bridge_secondary_bus(bus->self); + pci_bus_unlock(bus); + } else + rc = -EAGAIN; + + pci_bus_restore(bus); + + return rc; +} +EXPORT_SYMBOL_GPL(pci_try_reset_bus); + +/** * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count * @dev: PCI device to query * @@ -2728,8 +3956,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) o = (cmd & PCI_X_CMD_MAX_READ) >> 2; if (o != v) { - if (v > o && dev->bus && - (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC)) + if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC)) return -EIO; cmd &= ~PCI_X_CMD_MAX_READ; @@ -2750,18 +3977,11 @@ EXPORT_SYMBOL(pcix_set_mmrbc); */ int pcie_get_readrq(struct pci_dev *dev) { - int ret, cap; u16 ctl; - cap = pci_pcie_cap(dev); - if (!cap) - return -EINVAL; + pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl); - ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); - if (!ret) - ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12); - - return ret; + return 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12); } EXPORT_SYMBOL(pcie_get_readrq); @@ -2771,36 +3991,118 @@ EXPORT_SYMBOL(pcie_get_readrq); * @rq: maximum memory read count in bytes * valid values are 128, 256, 512, 1024, 2048, 4096 * - * If possible sets maximum read byte count + * If possible sets maximum memory read request in bytes */ int pcie_set_readrq(struct pci_dev *dev, int rq) { - int cap, err = -EINVAL; - u16 ctl, v; + u16 v; if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) - goto out; + return -EINVAL; + + /* + * If using the "performance" PCIe config, we clamp the + * read rq size to the max packet size to prevent the + * host bridge generating requests larger than we can + * cope with + */ + if (pcie_bus_config == PCIE_BUS_PERFORMANCE) { + int mps = pcie_get_mps(dev); + + if (mps < rq) + rq = mps; + } v = (ffs(rq) - 8) << 12; - cap = pci_pcie_cap(dev); - if (!cap) - goto out; + return pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_READRQ, v); +} +EXPORT_SYMBOL(pcie_set_readrq); + +/** + * pcie_get_mps - get PCI Express maximum payload size + * @dev: PCI device to query + * + * Returns maximum payload size in bytes + */ +int pcie_get_mps(struct pci_dev *dev) +{ + u16 ctl; - err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); - if (err) - goto out; + pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl); - if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) { - ctl &= ~PCI_EXP_DEVCTL_READRQ; - ctl |= v; - err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl); + return 128 << ((ctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); +} +EXPORT_SYMBOL(pcie_get_mps); + +/** + * pcie_set_mps - set PCI Express maximum payload size + * @dev: PCI device to query + * @mps: maximum payload size in bytes + * valid values are 128, 256, 512, 1024, 2048, 4096 + * + * If possible sets maximum payload size + */ +int pcie_set_mps(struct pci_dev *dev, int mps) +{ + u16 v; + + if (mps < 128 || mps > 4096 || !is_power_of_2(mps)) + return -EINVAL; + + v = ffs(mps) - 8; + if (v > dev->pcie_mpss) + return -EINVAL; + v <<= 5; + + return pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_PAYLOAD, v); +} +EXPORT_SYMBOL(pcie_set_mps); + +/** + * pcie_get_minimum_link - determine minimum link settings of a PCI device + * @dev: PCI device to query + * @speed: storage for minimum speed + * @width: storage for minimum width + * + * This function will walk up the PCI device chain and determine the minimum + * link width and speed of the device. + */ +int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed, + enum pcie_link_width *width) +{ + int ret; + + *speed = PCI_SPEED_UNKNOWN; + *width = PCIE_LNK_WIDTH_UNKNOWN; + + while (dev) { + u16 lnksta; + enum pci_bus_speed next_speed; + enum pcie_link_width next_width; + + ret = pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); + if (ret) + return ret; + + next_speed = pcie_link_speed[lnksta & PCI_EXP_LNKSTA_CLS]; + next_width = (lnksta & PCI_EXP_LNKSTA_NLW) >> + PCI_EXP_LNKSTA_NLW_SHIFT; + + if (next_speed < *speed) + *speed = next_speed; + + if (next_width < *width) + *width = next_width; + + dev = dev->bus->self; } -out: - return err; + return 0; } -EXPORT_SYMBOL(pcie_set_readrq); +EXPORT_SYMBOL(pcie_get_minimum_link); /** * pci_select_bars - Make BAR mask from the type of resource @@ -2817,6 +4119,7 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags) bars |= (1 << i); return bars; } +EXPORT_SYMBOL(pci_select_bars); /** * pci_resource_bar - get position of the BAR associated with a resource @@ -2856,11 +4159,11 @@ void __init pci_register_set_vga_state(arch_set_vga_state_t func) } static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, - unsigned int command_bits, bool change_bridge) + unsigned int command_bits, u32 flags) { if (arch_set_vga_state) return arch_set_vga_state(dev, decode, command_bits, - change_bridge); + flags); return 0; } @@ -2869,31 +4172,34 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, * @dev: the PCI device * @decode: true = enable decoding, false = disable decoding * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge: traverse ancestors and change bridges + * @flags: traverse ancestors and change bridges + * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE */ int pci_set_vga_state(struct pci_dev *dev, bool decode, - unsigned int command_bits, bool change_bridge) + unsigned int command_bits, u32 flags) { struct pci_bus *bus; struct pci_dev *bridge; u16 cmd; int rc; - WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)); + WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) && (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY))); /* ARCH specific VGA enables */ - rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge); + rc = pci_set_vga_state_arch(dev, decode, command_bits, flags); if (rc) return rc; - pci_read_config_word(dev, PCI_COMMAND, &cmd); - if (decode == true) - cmd |= command_bits; - else - cmd &= ~command_bits; - pci_write_config_word(dev, PCI_COMMAND, cmd); + if (flags & PCI_VGA_STATE_CHANGE_DECODES) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (decode == true) + cmd |= command_bits; + else + cmd &= ~command_bits; + pci_write_config_word(dev, PCI_COMMAND, cmd); + } - if (change_bridge == false) + if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE)) return 0; bus = dev->bus; @@ -2914,6 +4220,14 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, return 0; } +bool pci_device_is_present(struct pci_dev *pdev) +{ + u32 v; + + return pci_bus_read_dev_vendor_id(pdev->bus, pdev->devfn, &v, 0); +} +EXPORT_SYMBOL_GPL(pci_device_is_present); + #define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0}; static DEFINE_SPINLOCK(resource_alignment_lock); @@ -2925,7 +4239,7 @@ static DEFINE_SPINLOCK(resource_alignment_lock); * RETURNS: Resource alignment if it is specified. * Zero if it is not specified. */ -resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) +static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) { int seg, bus, slot, func, align_order, count; resource_size_t align = 0; @@ -2957,11 +4271,10 @@ resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) bus == dev->bus->number && slot == PCI_SLOT(dev->devfn) && func == PCI_FUNC(dev->devfn)) { - if (align_order == -1) { + if (align_order == -1) align = PAGE_SIZE; - } else { + else align = 1 << align_order; - } /* Found */ break; } @@ -2975,19 +4288,72 @@ resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) return align; } -/** - * pci_is_reassigndev - check if specified PCI is target device to reassign - * @dev: the PCI device to check - * - * RETURNS: non-zero for PCI device is a target device to reassign, - * or zero is not. +/* + * This function disables memory decoding and releases memory resources + * of the device specified by kernel's boot parameter 'pci=resource_alignment='. + * It also rounds up size to specified alignment. + * Later on, the kernel will assign page-aligned memory resource back + * to the device. */ -int pci_is_reassigndev(struct pci_dev *dev) +void pci_reassigndev_resource_alignment(struct pci_dev *dev) { - return (pci_specified_resource_alignment(dev) != 0); + int i; + struct resource *r; + resource_size_t align, size; + u16 command; + + /* check if specified PCI is target device to reassign */ + align = pci_specified_resource_alignment(dev); + if (!align) + return; + + if (dev->hdr_type == PCI_HEADER_TYPE_NORMAL && + (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { + dev_warn(&dev->dev, + "Can't reassign resources to host bridge.\n"); + return; + } + + dev_info(&dev->dev, + "Disabling memory decoding and releasing memory resources.\n"); + pci_read_config_word(dev, PCI_COMMAND, &command); + command &= ~PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, command); + + for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { + r = &dev->resource[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + size = resource_size(r); + if (size < align) { + size = align; + dev_info(&dev->dev, + "Rounding up size of resource #%d to %#llx.\n", + i, (unsigned long long)size); + } + r->flags |= IORESOURCE_UNSET; + r->end = size - 1; + r->start = 0; + } + /* Need to disable bridge's resource window, + * to enable the kernel to reassign new resource + * window later on. + */ + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { + r = &dev->resource[i]; + if (!(r->flags & IORESOURCE_MEM)) + continue; + r->flags |= IORESOURCE_UNSET; + r->end = resource_size(r) - 1; + r->start = 0; + } + pci_disable_bridge_window(dev); + } } -ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) +static ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) { if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1) count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1; @@ -2998,7 +4364,7 @@ ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) return count; } -ssize_t pci_get_resource_alignment_param(char *buf, size_t size) +static ssize_t pci_get_resource_alignment_param(char *buf, size_t size) { size_t count; spin_lock(&resource_alignment_lock); @@ -3026,10 +4392,9 @@ static int __init pci_resource_alignment_sysfs_init(void) return bus_create_file(&pci_bus_type, &bus_attr_resource_alignment); } - late_initcall(pci_resource_alignment_sysfs_init); -static void __devinit pci_no_domains(void) +static void pci_no_domains(void) { #ifdef CONFIG_PCI_DOMAINS pci_domains_supported = 0; @@ -3037,14 +4402,13 @@ static void __devinit pci_no_domains(void) } /** - * pci_ext_cfg_enabled - can we access extended PCI config space? - * @dev: The PCI device of the root bridge. + * pci_ext_cfg_avail - can we access extended PCI config space? * * Returns 1 if we can access PCI extended config space (offsets * greater than 0xff). This is the default implementation. Architecture * implementations can override this. */ -int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) +int __weak pci_ext_cfg_avail(void) { return 1; } @@ -3065,8 +4429,14 @@ static int __init pci_setup(char *str) pci_no_msi(); } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strncmp(str, "realloc=", 8)) { + pci_realloc_get_opt(str + 8); + } else if (!strncmp(str, "realloc", 7)) { + pci_realloc_get_opt("on"); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); + } else if (!strncmp(str, "noari", 5)) { + pcie_ari_disabled = true; } else if (!strncmp(str, "cbiosize=", 9)) { pci_cardbus_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "cbmemsize=", 10)) { @@ -3080,6 +4450,16 @@ static int __init pci_setup(char *str) pci_hotplug_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "hpmemsize=", 10)) { pci_hotplug_mem_size = memparse(str + 10, &str); + } else if (!strncmp(str, "pcie_bus_tune_off", 17)) { + pcie_bus_config = PCIE_BUS_TUNE_OFF; + } else if (!strncmp(str, "pcie_bus_safe", 13)) { + pcie_bus_config = PCIE_BUS_SAFE; + } else if (!strncmp(str, "pcie_bus_perf", 13)) { + pcie_bus_config = PCIE_BUS_PERFORMANCE; + } else if (!strncmp(str, "pcie_bus_peer2peer", 18)) { + pcie_bus_config = PCIE_BUS_PEER2PEER; + } else if (!strncmp(str, "pcie_scan_all", 13)) { + pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); @@ -3090,42 +4470,3 @@ static int __init pci_setup(char *str) return 0; } early_param("pci", pci_setup); - -EXPORT_SYMBOL(pci_reenable_device); -EXPORT_SYMBOL(pci_enable_device_io); -EXPORT_SYMBOL(pci_enable_device_mem); -EXPORT_SYMBOL(pci_enable_device); -EXPORT_SYMBOL(pcim_enable_device); -EXPORT_SYMBOL(pcim_pin_device); -EXPORT_SYMBOL(pci_disable_device); -EXPORT_SYMBOL(pci_find_capability); -EXPORT_SYMBOL(pci_bus_find_capability); -EXPORT_SYMBOL(pci_release_regions); -EXPORT_SYMBOL(pci_request_regions); -EXPORT_SYMBOL(pci_request_regions_exclusive); -EXPORT_SYMBOL(pci_release_region); -EXPORT_SYMBOL(pci_request_region); -EXPORT_SYMBOL(pci_request_region_exclusive); -EXPORT_SYMBOL(pci_release_selected_regions); -EXPORT_SYMBOL(pci_request_selected_regions); -EXPORT_SYMBOL(pci_request_selected_regions_exclusive); -EXPORT_SYMBOL(pci_set_master); -EXPORT_SYMBOL(pci_clear_master); -EXPORT_SYMBOL(pci_set_mwi); -EXPORT_SYMBOL(pci_try_set_mwi); -EXPORT_SYMBOL(pci_clear_mwi); -EXPORT_SYMBOL_GPL(pci_intx); -EXPORT_SYMBOL(pci_assign_resource); -EXPORT_SYMBOL(pci_find_parent_resource); -EXPORT_SYMBOL(pci_select_bars); - -EXPORT_SYMBOL(pci_set_power_state); -EXPORT_SYMBOL(pci_save_state); -EXPORT_SYMBOL(pci_restore_state); -EXPORT_SYMBOL(pci_pme_capable); -EXPORT_SYMBOL(pci_pme_active); -EXPORT_SYMBOL(pci_wake_from_d3); -EXPORT_SYMBOL(pci_target_state); -EXPORT_SYMBOL(pci_prepare_to_sleep); -EXPORT_SYMBOL(pci_back_from_sleep); -EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); |