diff options
Diffstat (limited to 'drivers/pci/bus.c')
| -rw-r--r-- | drivers/pci/bus.c | 152 |
1 files changed, 108 insertions, 44 deletions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index fc1b7401374..73aef51a28f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -13,7 +13,6 @@ #include <linux/errno.h> #include <linux/ioport.h> #include <linux/proc_fs.h> -#include <linux/init.h> #include <linux/slab.h> #include "pci.h" @@ -98,40 +97,53 @@ void pci_bus_remove_resources(struct pci_bus *bus) } } -/** - * pci_bus_alloc_resource - allocate a resource from a parent bus - * @bus: PCI bus - * @res: resource to allocate - * @size: size of resource to allocate - * @align: alignment of resource to allocate - * @min: minimum /proc/iomem address to allocate - * @type_mask: IORESOURCE_* type flags - * @alignf: resource alignment function - * @alignf_data: data argument for resource alignment function - * - * Given the PCI bus a device resides on, the size, minimum address, - * alignment and type, try to find an acceptable resource allocation - * for a specific device resource. +static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL}; +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT +static struct pci_bus_region pci_64_bit = {0, + (dma_addr_t) 0xffffffffffffffffULL}; +static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL, + (dma_addr_t) 0xffffffffffffffffULL}; +#endif + +/* + * @res contains CPU addresses. Clip it so the corresponding bus addresses + * on @bus are entirely within @region. This is used to control the bus + * addresses of resources we allocate, e.g., we may need a resource that + * can be mapped by a 32-bit BAR. */ -int -pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, +static void pci_clip_resource_to_region(struct pci_bus *bus, + struct resource *res, + struct pci_bus_region *region) +{ + struct pci_bus_region r; + + pcibios_resource_to_bus(bus, &r, res); + if (r.start < region->start) + r.start = region->start; + if (r.end > region->end) + r.end = region->end; + + if (r.end < r.start) + res->end = res->start - 1; + else + pcibios_bus_to_resource(bus, res, &r); +} + +static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, - resource_size_t min, unsigned int type_mask, + resource_size_t min, unsigned long type_mask, resource_size_t (*alignf)(void *, const struct resource *, resource_size_t, resource_size_t), - void *alignf_data) + void *alignf_data, + struct pci_bus_region *region) { - int i, ret = -ENOMEM; - struct resource *r; - resource_size_t max = -1; - - type_mask |= IORESOURCE_IO | IORESOURCE_MEM; + int i, ret; + struct resource *r, avail; + resource_size_t max; - /* don't allocate too high if the pref mem doesn't support 64bit*/ - if (!(res->flags & IORESOURCE_MEM_64)) - max = PCIBIOS_MAX_MEM_32; + type_mask |= IORESOURCE_TYPE_BITS; pci_bus_for_each_resource(bus, r, i) { if (!r) @@ -147,16 +159,74 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, !(res->flags & IORESOURCE_PREFETCH)) continue; + avail = *r; + pci_clip_resource_to_region(bus, &avail, region); + + /* + * "min" is typically PCIBIOS_MIN_IO or PCIBIOS_MIN_MEM to + * protect badly documented motherboard resources, but if + * this is an already-configured bridge window, its start + * overrides "min". + */ + if (avail.start) + min = avail.start; + + max = avail.end; + /* Ok, try it out.. */ - ret = allocate_resource(r, res, size, - r->start ? : min, - max, align, - alignf, alignf_data); + ret = allocate_resource(r, res, size, min, max, + align, alignf, alignf_data); if (ret == 0) - break; + return 0; + } + return -ENOMEM; +} + +/** + * pci_bus_alloc_resource - allocate a resource from a parent bus + * @bus: PCI bus + * @res: resource to allocate + * @size: size of resource to allocate + * @align: alignment of resource to allocate + * @min: minimum /proc/iomem address to allocate + * @type_mask: IORESOURCE_* type flags + * @alignf: resource alignment function + * @alignf_data: data argument for resource alignment function + * + * Given the PCI bus a device resides on, the size, minimum address, + * alignment and type, try to find an acceptable resource allocation + * for a specific device resource. + */ +int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, + resource_size_t size, resource_size_t align, + resource_size_t min, unsigned long type_mask, + resource_size_t (*alignf)(void *, + const struct resource *, + resource_size_t, + resource_size_t), + void *alignf_data) +{ +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + int rc; + + if (res->flags & IORESOURCE_MEM_64) { + rc = pci_bus_alloc_from_region(bus, res, size, align, min, + type_mask, alignf, alignf_data, + &pci_high); + if (rc == 0) + return 0; + + return pci_bus_alloc_from_region(bus, res, size, align, min, + type_mask, alignf, alignf_data, + &pci_64_bit); } - return ret; +#endif + + return pci_bus_alloc_from_region(bus, res, size, align, min, + type_mask, alignf, alignf_data, + &pci_32_bit); } +EXPORT_SYMBOL(pci_bus_alloc_resource); void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { } @@ -166,7 +236,7 @@ void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { } * * This adds add sysfs entries and start device drivers */ -int pci_bus_add_device(struct pci_dev *dev) +void pci_bus_add_device(struct pci_dev *dev) { int retval; @@ -176,15 +246,15 @@ int pci_bus_add_device(struct pci_dev *dev) */ pci_fixup_device(pci_fixup_final, dev); pci_create_sysfs_dev_files(dev); + pci_proc_attach_device(dev); dev->match_driver = true; retval = device_attach(&dev->dev); WARN_ON(retval < 0); dev->is_added = 1; - - return 0; } +EXPORT_SYMBOL_GPL(pci_bus_add_device); /** * pci_bus_add_devices - start driver for PCI devices @@ -196,16 +266,12 @@ void pci_bus_add_devices(const struct pci_bus *bus) { struct pci_dev *dev; struct pci_bus *child; - int retval; list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip already-added devices */ if (dev->is_added) continue; - retval = pci_bus_add_device(dev); - if (retval) - dev_err(&dev->dev, "Error adding device (%d)\n", - retval); + pci_bus_add_device(dev); } list_for_each_entry(dev, &bus->devices, bus_list) { @@ -215,6 +281,7 @@ void pci_bus_add_devices(const struct pci_bus *bus) pci_bus_add_devices(child); } } +EXPORT_SYMBOL(pci_bus_add_devices); /** pci_walk_bus - walk devices on/under bus, calling callback. * @top bus whose devices should be walked @@ -280,6 +347,3 @@ void pci_bus_put(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_put); -EXPORT_SYMBOL(pci_bus_alloc_resource); -EXPORT_SYMBOL_GPL(pci_bus_add_device); -EXPORT_SYMBOL(pci_bus_add_devices); |
