aboutsummaryrefslogtreecommitdiff
path: root/drivers/parport
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parport')
-rw-r--r--drivers/parport/Kconfig29
-rw-r--r--drivers/parport/ieee1284.c2
-rw-r--r--drivers/parport/parport_amiga.c52
-rw-r--r--drivers/parport/parport_atari.c9
-rw-r--r--drivers/parport/parport_ax88796.c15
-rw-r--r--drivers/parport/parport_cs.c16
-rw-r--r--drivers/parport/parport_gsc.c32
-rw-r--r--drivers/parport/parport_gsc.h2
-rw-r--r--drivers/parport/parport_ip32.c7
-rw-r--r--drivers/parport/parport_mfc3.c39
-rw-r--r--drivers/parport/parport_pc.c452
-rw-r--r--drivers/parport/parport_serial.c294
-rw-r--r--drivers/parport/parport_sunbpp.c47
-rw-r--r--drivers/parport/procfs.c64
-rw-r--r--drivers/parport/share.c10
15 files changed, 406 insertions, 664 deletions
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 855f389eea4..44333bd8f90 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -5,6 +5,12 @@
# Parport configuration.
#
+config ARCH_MIGHT_HAVE_PC_PARPORT
+ bool
+ help
+ Select this config option from the architecture Kconfig if
+ the architecture might have PC parallel port hardware.
+
menuconfig PARPORT
tristate "Parallel port support"
depends on HAS_IOMEM
@@ -35,9 +41,8 @@ if PARPORT
config PARPORT_PC
tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
- (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
- ---help---
+ depends on ARCH_MIGHT_HAVE_PC_PARPORT
+ help
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
parallel ports. PA-RISC owners should only say Y here if they
@@ -57,8 +62,8 @@ config PARPORT_SERIAL
will be called parport_serial.
config PARPORT_PC_FIFO
- bool "Use FIFO/DMA if available (EXPERIMENTAL)"
- depends on PARPORT_PC && EXPERIMENTAL
+ bool "Use FIFO/DMA if available"
+ depends on PARPORT_PC
help
Many parallel port chipsets provide hardware that can speed up
printing. Say Y here if you want to take advantage of that.
@@ -70,8 +75,8 @@ config PARPORT_PC_FIFO
specify which IRQ/DMA to use.
config PARPORT_PC_SUPERIO
- bool "SuperIO chipset support (EXPERIMENTAL)"
- depends on PARPORT_PC && EXPERIMENTAL
+ bool "SuperIO chipset support"
+ depends on PARPORT_PC && !PARISC
help
Saying Y here enables some probes for Super-IO chipsets in order to
find out things like base addresses, IRQ lines and DMA channels. It
@@ -85,8 +90,8 @@ config PARPORT_PC_PCMCIA
ports. If unsure, say N.
config PARPORT_IP32
- tristate "SGI IP32 builtin port (EXPERIMENTAL)"
- depends on SGI_IP32 && EXPERIMENTAL
+ tristate "SGI IP32 builtin port"
+ depends on SGI_IP32
select PARPORT_NOT_PC
help
Say Y here if you need support for the parallel port on
@@ -126,8 +131,8 @@ config PARPORT_GSC
select PARPORT_NOT_PC
config PARPORT_SUNBPP
- tristate "Sparc hardware (EXPERIMENTAL)"
- depends on SBUS && EXPERIMENTAL
+ tristate "Sparc hardware"
+ depends on SBUS
select PARPORT_NOT_PC
help
This driver provides support for the bidirectional parallel port
@@ -142,7 +147,7 @@ config PARPORT_AX88796
the AX88796 network controller chip. This code is also available
as a module (say M), called parport_ax88796.
- The driver is not dependant on the AX88796 network driver, and
+ The driver is not dependent on the AX88796 network driver, and
should not interfere with the networking functions of the chip.
config PARPORT_1284
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 8901ecf6e03..f9fd4b33a54 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -355,7 +355,7 @@ int parport_negotiate (struct parport *port, int mode)
return 0;
}
- /* Go to compability forward idle mode */
+ /* Go to compatibility forward idle mode */
if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
parport_ieee1284_terminate (port);
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 8bef6d60f88..26ecdea84fb 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -48,23 +48,6 @@ static unsigned char amiga_read_data(struct parport *p)
return ciaa.prb;
}
-#if 0
-static unsigned char control_pc_to_amiga(unsigned char control)
-{
- unsigned char ret = 0;
-
- if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
- ;
- if (control & PARPORT_CONTROL_INIT) /* INITP */
- /* reset connected to cpu reset pin */;
- if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
- /* Not connected */;
- if (control & PARPORT_CONTROL_STROBE) /* Strobe */
- /* Handled only directly by hardware */;
- return ret;
-}
-#endif
-
static unsigned char control_amiga_to_pc(unsigned char control)
{
return PARPORT_CONTROL_SELECT |
@@ -95,25 +78,6 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask,
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_amiga(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- /* handled in hardware */;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- /* not connected */;
- return ret;
-}
-#endif
-
static unsigned char status_amiga_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
@@ -268,7 +232,6 @@ static int __exit amiga_parallel_remove(struct platform_device *pdev)
if (port->irq != PARPORT_IRQ_NONE)
free_irq(IRQ_AMIGA_CIAA_FLG, port);
parport_put_port(port);
- platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -280,20 +243,7 @@ static struct platform_driver amiga_parallel_driver = {
},
};
-static int __init amiga_parallel_init(void)
-{
- return platform_driver_probe(&amiga_parallel_driver,
- amiga_parallel_probe);
-}
-
-module_init(amiga_parallel_init);
-
-static void __exit amiga_parallel_exit(void)
-{
- platform_driver_unregister(&amiga_parallel_driver);
-}
-
-module_exit(amiga_parallel_exit);
+module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index 0b28fccec03..7ad59ac68cf 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -130,15 +130,6 @@ parport_atari_data_forward(struct parport *p)
static void
parport_atari_data_reverse(struct parport *p)
{
-#if 0 /* too dangerous, can kill sound chip */
- unsigned long flags;
-
- local_irq_save(flags);
- /* Soundchip port B as input. */
- sound_ym.rd_data_reg_sel = 7;
- sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
- local_irq_restore(flags);
-#endif
}
static struct parport_operations parport_atari_ops = {
diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
index 2c5ac2bf5c5..7c5d86696ee 100644
--- a/drivers/parport/parport_ax88796.c
+++ b/drivers/parport/parport_ax88796.c
@@ -293,7 +293,7 @@ static int parport_ax88796_probe(struct platform_device *pdev)
goto exit_mem;
}
- size = (res->end - res->start) + 1;
+ size = resource_size(res);
spacing = size / 3;
dd->io = request_mem_region(res->start, size, pdev->name);
@@ -420,18 +420,7 @@ static struct platform_driver axdrv = {
.resume = parport_ax88796_resume,
};
-static int __init parport_ax88796_init(void)
-{
- return platform_driver_register(&axdrv);
-}
-
-static void __exit parport_ax88796_exit(void)
-{
- platform_driver_unregister(&axdrv);
-}
-
-module_init(parport_ax88796_init)
-module_exit(parport_ax88796_exit)
+module_platform_driver(axdrv);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("AX88796 Parport parallel port driver");
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 787ebdeae31..e9b52e4a464 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -178,7 +178,7 @@ static void parport_cs_release(struct pcmcia_device *link)
} /* parport_cs_release */
-static struct pcmcia_device_id parport_ids[] = {
+static const struct pcmcia_device_id parport_ids[] = {
PCMCIA_DEVICE_FUNC_ID(3),
PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0003),
@@ -193,16 +193,4 @@ static struct pcmcia_driver parport_cs_driver = {
.remove = parport_detach,
.id_table = parport_ids,
};
-
-static int __init init_parport_cs(void)
-{
- return pcmcia_register_driver(&parport_cs_driver);
-}
-
-static void __exit exit_parport_cs(void)
-{
- pcmcia_unregister_driver(&parport_cs_driver);
-}
-
-module_init(init_parport_cs);
-module_exit(exit_parport_cs);
+module_pcmcia_driver(parport_cs_driver);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 5d6de380e42..6e3a60c7887 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -137,7 +137,7 @@ struct parport_operations parport_gsc_ops =
/*
* Checks for port existence, all ports support SPP MODE
*/
-static int __devinit parport_SPP_supported(struct parport *pb)
+static int parport_SPP_supported(struct parport *pb)
{
unsigned char r, w;
@@ -201,7 +201,7 @@ static int __devinit parport_SPP_supported(struct parport *pb)
* be misdetected here is rather academic.
*/
-static int __devinit parport_PS2_supported(struct parport *pb)
+static int parport_PS2_supported(struct parport *pb)
{
int ok = 0;
@@ -232,10 +232,9 @@ static int __devinit parport_PS2_supported(struct parport *pb)
/* --- Initialisation code -------------------------------- */
-struct parport *__devinit parport_gsc_probe_port (unsigned long base,
- unsigned long base_hi,
- int irq, int dma,
- struct pci_dev *dev)
+struct parport *parport_gsc_probe_port(unsigned long base,
+ unsigned long base_hi, int irq,
+ int dma, struct parisc_device *padev)
{
struct parport_gsc_private *priv;
struct parport_operations *ops;
@@ -247,19 +246,18 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
return NULL;
}
- ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
+ ops = kmemdup(&parport_gsc_ops, sizeof(struct parport_operations),
+ GFP_KERNEL);
if (!ops) {
printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
base);
kfree (priv);
return NULL;
}
- memcpy (ops, &parport_gsc_ops, sizeof (struct parport_operations));
priv->ctr = 0xc;
priv->ctr_writable = 0xff;
priv->dma_buf = 0;
priv->dma_handle = 0;
- priv->dev = dev;
p->base = base;
p->base_hi = base_hi;
p->irq = irq;
@@ -271,6 +269,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
if (!parport_SPP_supported (p)) {
/* No port. */
kfree (priv);
+ kfree(ops);
return NULL;
}
parport_PS2_supported (p);
@@ -282,6 +281,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
return NULL;
}
+ p->dev = &padev->dev;
p->base_hi = base_hi;
p->modes = tmp.modes;
p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
@@ -344,9 +344,9 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
#define PARPORT_GSC_OFFSET 0x800
-static int __devinitdata parport_count;
+static int parport_count;
-static int __devinit parport_init_chip(struct parisc_device *dev)
+static int parport_init_chip(struct parisc_device *dev)
{
struct parport *p;
unsigned long port;
@@ -373,7 +373,7 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
}
p = parport_gsc_probe_port(port, 0, dev->irq,
- /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
+ /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev);
if (p)
parport_count++;
dev_set_drvdata(&dev->dev, p);
@@ -381,7 +381,7 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
return 0;
}
-static int __devexit parport_remove_chip(struct parisc_device *dev)
+static int parport_remove_chip(struct parisc_device *dev)
{
struct parport *p = dev_get_drvdata(&dev->dev);
if (p) {
@@ -414,15 +414,15 @@ static struct parisc_driver parport_driver = {
.name = "Parallel",
.id_table = parport_tbl,
.probe = parport_init_chip,
- .remove = __devexit_p(parport_remove_chip),
+ .remove = parport_remove_chip,
};
-int __devinit parport_gsc_init(void)
+int parport_gsc_init(void)
{
return register_parisc_driver(&parport_driver);
}
-static void __devexit parport_gsc_exit(void)
+static void parport_gsc_exit(void)
{
unregister_parisc_driver(&parport_driver);
}
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
index fc9c37c5402..812214768d2 100644
--- a/drivers/parport/parport_gsc.h
+++ b/drivers/parport/parport_gsc.h
@@ -217,6 +217,6 @@ extern void parport_gsc_dec_use_count(void);
extern struct parport *parport_gsc_probe_port(unsigned long base,
unsigned long base_hi,
int irq, int dma,
- struct pci_dev *dev);
+ struct parisc_device *padev);
#endif /* __DRIVERS_PARPORT_PARPORT_GSC_H */
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
index d3d7809af8b..c864f82bd37 100644
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@@ -135,7 +135,7 @@
#define PARPORT_IP32_ENABLE_EPP (1U << 3)
#define PARPORT_IP32_ENABLE_ECP (1U << 4)
static unsigned int features = ~0U;
-static int verbose_probing = DEFAULT_VERBOSE_PROBING;
+static bool verbose_probing = DEFAULT_VERBOSE_PROBING;
/* We do not support more than one port. */
static struct parport *this_port = NULL;
@@ -1331,7 +1331,7 @@ static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
break;
/* Initialize mutex used to take interrupts into account */
- INIT_COMPLETION(priv->irq_complete);
+ reinit_completion(&priv->irq_complete);
/* Enable serviceIntr */
parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
@@ -1446,7 +1446,7 @@ static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
priv->irq_mode = PARPORT_IP32_IRQ_HERE;
parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
- INIT_COMPLETION(priv->irq_complete);
+ reinit_completion(&priv->irq_complete);
parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);
nfault_timeout = min((unsigned long)physport->cad->timeout,
@@ -2203,7 +2203,6 @@ static __exit void parport_ip32_unregister_port(struct parport *p)
static int __init parport_ip32_init(void)
{
pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
- pr_debug1(PPIP32 "Compiled on %s, %s\n", __DATE__, __TIME__);
this_port = parport_ip32_probe_port();
return IS_ERR(this_port) ? PTR_ERR(this_port) : 0;
}
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 362db31d8ca..2f650f68af1 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -147,25 +147,6 @@ DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_mfc3(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- ret |= 8;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- ret |= 16;
- return ret;
-}
-#endif
-
static unsigned char status_mfc3_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY;
@@ -184,14 +165,6 @@ static unsigned char status_mfc3_to_pc(unsigned char status)
return ret;
}
-#if 0 /* currently unused */
-static void mfc3_write_status( struct parport *p, unsigned char status)
-{
-DPRINTK(KERN_DEBUG "write_status %02x\n",status);
- pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
-}
-#endif
-
static unsigned char mfc3_read_status(struct parport *p)
{
unsigned char status;
@@ -201,14 +174,6 @@ DPRINTK(KERN_DEBUG "read_status %02x\n", status);
return status;
}
-#if 0 /* currently unused */
-static void mfc3_change_mode( struct parport *p, int m)
-{
- /* XXX: This port only has one mode, and I am
- not sure about the corresponding PC-style mode*/
-}
-#endif
-
static int use_cnt = 0;
static irqreturn_t mfc3_interrupt(int irq, void *dev_id)
@@ -335,7 +300,7 @@ static int __init parport_mfc3_init(void)
if (!request_mem_region(piabase, sizeof(struct pia), "PIA"))
continue;
- pp = (struct pia *)ZTWO_VADDR(piabase);
+ pp = ZTWO_VADDR(piabase);
pp->crb = 0;
pp->pddrb = 255; /* all data pins output */
pp->crb = PIA_DDR|32|8;
@@ -397,7 +362,7 @@ static void __exit parport_mfc3_exit(void)
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port");
MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
MODULE_LICENSE("GPL");
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8d62fb76cd4..76ee7750bc5 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -197,54 +197,6 @@ static int change_mode(struct parport *p, int m)
ECR_WRITE(p, oecr);
return 0;
}
-
-#ifdef CONFIG_PARPORT_1284
-/* Find FIFO lossage; FIFO is reset */
-#if 0
-static int get_fifo_residue(struct parport *p)
-{
- int residue;
- int cnfga;
- const struct parport_pc_private *priv = p->physport->private_data;
-
- /* Adjust for the contents of the FIFO. */
- for (residue = priv->fifo_depth; ; residue--) {
- if (inb(ECONTROL(p)) & 0x2)
- /* Full up. */
- break;
-
- outb(0, FIFO(p));
- }
-
- printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
- residue);
-
- /* Reset the FIFO. */
- frob_set_mode(p, ECR_PS2);
-
- /* Now change to config mode and clean up. FIXME */
- frob_set_mode(p, ECR_CNF);
- cnfga = inb(CONFIGA(p));
- printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
-
- if (!(cnfga & (1<<2))) {
- printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
- residue++;
- }
-
- /* Don't care about partial PWords until support is added for
- * PWord != 1 byte. */
-
- /* Back to PS2 mode. */
- frob_set_mode(p, ECR_PS2);
-
- DPRINTK(KERN_DEBUG
- "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
- inb(ECONTROL(p)));
- return residue;
-}
-#endif /* 0 */
-#endif /* IEEE 1284 support */
#endif /* FIFO support */
/*
@@ -940,234 +892,6 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
return written;
}
-
-#if 0
-static size_t parport_pc_ecp_read_block_pio(struct parport *port,
- void *buf, size_t length,
- int flags)
-{
- size_t left = length;
- size_t fifofull;
- int r;
- const int fifo = FIFO(port);
- const struct parport_pc_private *priv = port->physport->private_data;
- const int fifo_depth = priv->fifo_depth;
- char *bufp = buf;
-
- port = port->physport;
- DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
- dump_parport_state("enter fcn", port);
-
- /* Special case: a timeout of zero means we cannot call schedule().
- * Also if O_NONBLOCK is set then use the default implementation. */
- if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
- /* If the peripheral is allowed to send RLE compressed
- * data, it is possible for a byte to expand to 128
- * bytes in the FIFO. */
- fifofull = 128;
- } else {
- fifofull = fifo_depth;
- }
-
- /* If the caller wants less than a full FIFO's worth of data,
- * go through software emulation. Otherwise we may have to throw
- * away data. */
- if (length < fifofull)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
- /* change to reverse-idle phase (must be in forward-idle) */
-
- /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control(port,
- PARPORT_CONTROL_AUTOFD
- | PARPORT_CONTROL_STROBE,
- PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse(port); /* Must be in PS2 mode */
- udelay(5);
- /* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control(port,
- PARPORT_CONTROL_INIT,
- 0);
- /* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
- "in ecp_read_block_pio\n", port->name, r);
- return 0;
- }
- }
-
- /* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control(port,
- PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD); */
- r = change_mode(port, ECR_ECP); /* ECP FIFO */
- if (r)
- printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
- port->name);
-
- port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-
- /* the first byte must be collected manually */
- dump_parport_state("pre 43", port);
- /* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
- if (r) {
- /* timed out while reading -- no data */
- printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
- goto out_no_data;
- }
- /* read byte */
- *bufp++ = inb(DATA(port));
- left--;
- dump_parport_state("43-44", port);
- /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- 0);
- dump_parport_state("pre 45", port);
- /* Event 45: Wait for nAck to go high */
- /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
- PARPORT_STATUS_ACK); */
- dump_parport_state("post 45", port);
- r = 0;
- if (r) {
- /* timed out while waiting for peripheral to respond to ack */
- printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
-
- /* keep hold of the byte we've got already */
- goto out_no_data;
- }
- /* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
-
-
- dump_parport_state("rev idle", port);
- /* Do the transfer. */
- while (left > fifofull) {
- int ret;
- unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb(ECONTROL(port));
-
- if (need_resched() && time_before(jiffies, expire))
- /* Can't yield the port. */
- schedule();
-
- /* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
-
- if (ecrval & 0x01) {
- /* FIFO is empty. Wait for interrupt. */
- dump_parport_state("FIFO empty", port);
-
- /* Anyone else waiting for the port? */
- if (port->waithead) {
- printk(KERN_DEBUG "Somebody wants the port\n");
- break;
- }
-
- /* Clear serviceIntr */
- ECR_WRITE(port, ecrval & ~(1<<2));
-false_alarm:
- dump_parport_state("waiting", port);
- ret = parport_wait_event(port, HZ);
- DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
- ret);
- if (ret < 0)
- break;
- ret = 0;
- if (!time_before(jiffies, expire)) {
- /* Timed out. */
- dump_parport_state("timeout", port);
- printk(KERN_DEBUG "PIO read timed out\n");
- break;
- }
- ecrval = inb(ECONTROL(port));
- if (!(ecrval & (1<<2))) {
- if (need_resched() &&
- time_before(jiffies, expire)) {
- schedule();
- }
- goto false_alarm;
- }
-
- /* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
- continue;
- }
-
- if (ecrval & 0x02) {
- /* FIFO is full. */
- dump_parport_state("FIFO full", port);
- insb(fifo, bufp, fifo_depth);
- bufp += fifo_depth;
- left -= fifo_depth;
- continue;
- }
-
- DPRINTK(KERN_DEBUG
- "*** ecp_read_block_pio: reading one byte from the FIFO\n");
-
- /* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb(fifo);
- left--;
- }
-
- /* scoop up anything left in the FIFO */
- while (left && !(inb(ECONTROL(port) & 0x01))) {
- *bufp++ = inb(fifo);
- left--;
- }
-
- port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- dump_parport_state("rev idle2", port);
-
-out_no_data:
-
- /* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
-
- /* event 49: PError goes high */
- r = parport_wait_peripheral(port,
- PARPORT_STATUS_PAPEROUT,
- PARPORT_STATUS_PAPEROUT);
- if (r) {
- printk(KERN_DEBUG
- "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
- port->name, r);
- }
-
- port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-
- /* Finish up. */
- {
- int lost = get_fifo_residue(port);
- if (lost)
- /* Shouldn't happen with compliant peripherals. */
- printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
- port->name, lost);
- }
-
- dump_parport_state("fwd idle", port);
- return length - left;
-}
-#endif /* 0 */
#endif /* IEEE 1284 support */
#endif /* Allowed to use FIFO/DMA */
@@ -1229,7 +953,7 @@ static struct superio_struct *find_free_superio(void)
/* Super-IO chipset detection, Winbond, SMSC */
-static void __devinit show_parconfig_smsc37c669(int io, int key)
+static void show_parconfig_smsc37c669(int io, int key)
{
int cr1, cr4, cra, cr23, cr26, cr27;
struct superio_struct *s;
@@ -1314,7 +1038,7 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
}
-static void __devinit show_parconfig_winbond(int io, int key)
+static void show_parconfig_winbond(int io, int key)
{
int cr30, cr60, cr61, cr70, cr74, crf0;
struct superio_struct *s;
@@ -1382,8 +1106,7 @@ static void __devinit show_parconfig_winbond(int io, int key)
}
}
-static void __devinit decode_winbond(int efer, int key, int devid,
- int devrev, int oldid)
+static void decode_winbond(int efer, int key, int devid, int devrev, int oldid)
{
const char *type = "unknown";
int id, progif = 2;
@@ -1435,7 +1158,7 @@ static void __devinit decode_winbond(int efer, int key, int devid,
show_parconfig_winbond(efer, key);
}
-static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
+static void decode_smsc(int efer, int key, int devid, int devrev)
{
const char *type = "unknown";
void (*func)(int io, int key);
@@ -1469,7 +1192,7 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
}
-static void __devinit winbond_check(int io, int key)
+static void winbond_check(int io, int key)
{
int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
@@ -1488,7 +1211,7 @@ static void __devinit winbond_check(int io, int key)
outb(key, io);
outb(key, io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
+ function enable register */
outb(0x20, io); /* Write EFIR, extended function index register */
devid = inb(io + 1); /* Read EFDR, extended function data register */
outb(0x21, io);
@@ -1507,7 +1230,7 @@ out:
release_region(io, 3);
}
-static void __devinit winbond_check2(int io, int key)
+static void winbond_check2(int io, int key)
{
int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
@@ -1527,7 +1250,7 @@ static void __devinit winbond_check2(int io, int key)
x_oldid = inb(io + 2);
outb(key, io); /* Write Magic Byte to EFER, extended
- funtion enable register */
+ function enable register */
outb(0x20, io + 2); /* Write EFIR, extended function index register */
devid = inb(io + 2); /* Read EFDR, extended function data register */
outb(0x21, io + 1);
@@ -1548,7 +1271,7 @@ out:
release_region(io, 3);
}
-static void __devinit smsc_check(int io, int key)
+static void smsc_check(int io, int key)
{
int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
@@ -1569,7 +1292,7 @@ static void __devinit smsc_check(int io, int key)
outb(key, io);
outb(key, io); /* Write Magic Sequence to EFER, extended
- funtion enable register */
+ function enable register */
outb(0x0d, io); /* Write EFIR, extended function index register */
oldid = inb(io + 1); /* Read EFDR, extended function data register */
outb(0x0e, io);
@@ -1592,7 +1315,7 @@ out:
}
-static void __devinit detect_and_report_winbond(void)
+static void detect_and_report_winbond(void)
{
if (verbose_probing)
printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
@@ -1605,7 +1328,7 @@ static void __devinit detect_and_report_winbond(void)
winbond_check2(0x250, 0x89);
}
-static void __devinit detect_and_report_smsc(void)
+static void detect_and_report_smsc(void)
{
if (verbose_probing)
printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
@@ -1615,13 +1338,13 @@ static void __devinit detect_and_report_smsc(void)
smsc_check(0x370, 0x44);
}
-static void __devinit detect_and_report_it87(void)
+static void detect_and_report_it87(void)
{
u16 dev;
u8 origval, r;
if (verbose_probing)
printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
- if (!request_region(0x2e, 2, __func__))
+ if (!request_muxed_region(0x2e, 2, __func__))
return;
origval = inb(0x2e); /* Save original value */
outb(0x87, 0x2e);
@@ -2072,24 +1795,24 @@ static int parport_ECPEPP_supported(struct parport *pb)
#else /* No IEEE 1284 support */
/* Don't bother probing for modes we know we won't use. */
-static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
+static int parport_PS2_supported(struct parport *pb) { return 0; }
#ifdef CONFIG_PARPORT_PC_FIFO
static int parport_ECP_supported(struct parport *pb)
{
return 0;
}
#endif
-static int __devinit parport_EPP_supported(struct parport *pb)
+static int parport_EPP_supported(struct parport *pb)
{
return 0;
}
-static int __devinit parport_ECPEPP_supported(struct parport *pb)
+static int parport_ECPEPP_supported(struct parport *pb)
{
return 0;
}
-static int __devinit parport_ECPPS2_supported(struct parport *pb)
+static int parport_ECPPS2_supported(struct parport *pb)
{
return 0;
}
@@ -2281,6 +2004,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
struct resource *ECR_res = NULL;
struct resource *EPP_res = NULL;
struct platform_device *pdev = NULL;
+ int ret;
if (!dev) {
/* We need a physical device to attach to, but none was
@@ -2291,8 +2015,11 @@ struct parport *parport_pc_probe_port(unsigned long int base,
return NULL;
dev = &pdev->dev;
- dev->coherent_dma_mask = DMA_BIT_MASK(24);
- dev->dma_mask = &dev->coherent_dma_mask;
+ ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(24));
+ if (ret) {
+ dev_err(dev, "Unable to set coherent dma mask: disabling DMA\n");
+ dma = PARPORT_DMA_NONE;
+ }
}
ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
@@ -2351,7 +2078,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
if (p->base_hi && priv->ecr)
- printk(" (0x%lx)", p->base_hi);
+ printk(KERN_CONT " (0x%lx)", p->base_hi);
if (p->irq == PARPORT_IRQ_AUTO) {
p->irq = PARPORT_IRQ_NONE;
parport_irq_probe(p);
@@ -2362,7 +2089,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
p->irq = PARPORT_IRQ_NONE;
}
if (p->irq != PARPORT_IRQ_NONE) {
- printk(", irq %d", p->irq);
+ printk(KERN_CONT ", irq %d", p->irq);
priv->ctr_writable |= 0x10;
if (p->dma == PARPORT_DMA_AUTO) {
@@ -2386,21 +2113,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
#endif /* IEEE 1284 support */
if (p->dma != PARPORT_DMA_NONE) {
- printk(", dma %d", p->dma);
+ printk(KERN_CONT ", dma %d", p->dma);
p->modes |= PARPORT_MODE_DMA;
} else
- printk(", using FIFO");
+ printk(KERN_CONT ", using FIFO");
} else
/* We can't use the DMA channel after all. */
p->dma = PARPORT_DMA_NONE;
#endif /* Allowed to use FIFO/DMA */
- printk(" [");
+ printk(KERN_CONT " [");
#define printmode(x) \
{\
if (p->modes & PARPORT_MODE_##x) {\
- printk("%s%s", f ? "," : "", #x);\
+ printk(KERN_CONT "%s%s", f ? "," : "", #x);\
f++;\
} \
}
@@ -2416,9 +2143,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
}
#undef printmode
#ifndef CONFIG_PARPORT_1284
- printk("(,...)");
+ printk(KERN_CONT "(,...)");
#endif /* CONFIG_PARPORT_1284 */
- printk("]\n");
+ printk(KERN_CONT "]\n");
if (probedirq != PARPORT_IRQ_NONE)
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
@@ -2545,12 +2272,10 @@ EXPORT_SYMBOL(parport_pc_unregister_port);
#ifdef CONFIG_PCI
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
- int autodma,
- const struct parport_pc_via_data *via)
+static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
+ const struct parport_pc_via_data *via)
{
short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
- struct resource *base_res;
u32 ite8872set;
u32 ite8872_lpt, ite8872_lpthi;
u8 ite8872_irq, type;
@@ -2561,8 +2286,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
/* make sure which one chip */
for (i = 0; i < 5; i++) {
- base_res = request_region(inta_addr[i], 32, "it887x");
- if (base_res) {
+ if (request_region(inta_addr[i], 32, "it887x")) {
int test;
pci_write_config_dword(pdev, 0x60,
0xe5000000 | inta_addr[i]);
@@ -2571,7 +2295,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
test = inb(inta_addr[i]);
if (test != 0xff)
break;
- release_region(inta_addr[i], 0x8);
+ release_region(inta_addr[i], 32);
}
}
if (i >= 5) {
@@ -2597,14 +2321,17 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
break;
case 0x6:
printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ release_region(inta_addr[i], 32);
return 0;
case 0x8:
printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
+ release_region(inta_addr[i], 32);
return 0;
default:
printk(KERN_INFO "parport_pc: unknown ITE887x\n");
printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
"output to Rich.Liu@ite.com.tw\n");
+ release_region(inta_addr[i], 32);
return 0;
}
@@ -2635,7 +2362,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
/*
* Release the resource so that parport_pc_probe_port can get it.
*/
- release_resource(base_res);
+ release_region(inta_addr[i], 32);
if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
printk(KERN_INFO
@@ -2652,10 +2379,10 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode;
+static int parport_init_mode;
/* Data for two known VIA chips */
-static struct parport_pc_via_data via_686a_data __devinitdata = {
+static struct parport_pc_via_data via_686a_data = {
0x51,
0x50,
0x85,
@@ -2664,7 +2391,7 @@ static struct parport_pc_via_data via_686a_data __devinitdata = {
0xF0,
0xE6
};
-static struct parport_pc_via_data via_8231_data __devinitdata = {
+static struct parport_pc_via_data via_8231_data = {
0x45,
0x44,
0x50,
@@ -2674,9 +2401,8 @@ static struct parport_pc_via_data via_8231_data __devinitdata = {
0xF6
};
-static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
- int autodma,
- const struct parport_pc_via_data *via)
+static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
+ const struct parport_pc_via_data *via)
{
u8 tmp, tmp2, siofunc;
u8 ppcontrol = 0;
@@ -2850,7 +2576,7 @@ static struct parport_pc_superio {
int (*probe) (struct pci_dev *pdev, int autoirq, int autodma,
const struct parport_pc_via_data *via);
const struct parport_pc_via_data *via;
-} parport_pc_superio_info[] __devinitdata = {
+} parport_pc_superio_info[] = {
{ sio_via_probe, &via_686a_data, },
{ sio_via_probe, &via_8231_data, },
{ sio_ite_8872_probe, NULL, },
@@ -2866,24 +2592,6 @@ enum parport_pc_pci_cards {
lava_parallel_dual_b,
boca_ioppar,
plx_9050,
- timedia_4078a,
- timedia_4079h,
- timedia_4085h,
- timedia_4088a,
- timedia_4089a,
- timedia_4095a,
- timedia_4096a,
- timedia_4078u,
- timedia_4079a,
- timedia_4085u,
- timedia_4079r,
- timedia_4079s,
- timedia_4079d,
- timedia_4079e,
- timedia_4079f,
- timedia_9079a,
- timedia_9079b,
- timedia_9079c,
timedia_4006a,
timedia_4014,
timedia_4008a,
@@ -2892,8 +2600,6 @@ enum parport_pc_pci_cards {
syba_2p_epp,
syba_1p_ecp,
titan_010l,
- titan_1284p1,
- titan_1284p2,
avlab_1p,
avlab_2p,
oxsemi_952,
@@ -2942,24 +2648,6 @@ static struct parport_pc_pci {
/* lava_parallel_dual_b */ { 1, { { 0, -1 }, } },
/* boca_ioppar */ { 1, { { 0, -1 }, } },
/* plx_9050 */ { 2, { { 4, -1 }, { 5, -1 }, } },
- /* timedia_4078a */ { 1, { { 2, -1 }, } },
- /* timedia_4079h */ { 1, { { 2, 3 }, } },
- /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
- /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
- /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
- /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
- /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
- /* timedia_4078u */ { 1, { { 2, -1 }, } },
- /* timedia_4079a */ { 1, { { 2, 3 }, } },
- /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
- /* timedia_4079r */ { 1, { { 2, 3 }, } },
- /* timedia_4079s */ { 1, { { 2, 3 }, } },
- /* timedia_4079d */ { 1, { { 2, 3 }, } },
- /* timedia_4079e */ { 1, { { 2, 3 }, } },
- /* timedia_4079f */ { 1, { { 2, 3 }, } },
- /* timedia_9079a */ { 1, { { 2, 3 }, } },
- /* timedia_9079b */ { 1, { { 2, 3 }, } },
- /* timedia_9079c */ { 1, { { 2, 3 }, } },
/* timedia_4006a */ { 1, { { 0, -1 }, } },
/* timedia_4014 */ { 2, { { 0, -1 }, { 2, -1 }, } },
/* timedia_4008a */ { 1, { { 0, 1 }, } },
@@ -2970,8 +2658,6 @@ static struct parport_pc_pci {
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
- /* titan_1284p1 */ { 1, { { 0, 1 }, } },
- /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* avlab_1p */ { 1, { { 0, 1}, } },
/* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2987,8 +2673,8 @@ static struct parport_pc_pci {
/* netmos_9705 */ { 1, { { 0, -1 }, } },
/* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
- /* netmos_9805 */ { 1, { { 0, -1 }, } },
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* netmos_9805 */ { 1, { { 0, 1 }, } },
+ /* netmos_9815 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* netmos_9901 */ { 1, { { 0, -1 }, } },
/* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
@@ -3021,24 +2707,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
- { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
- { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
- { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
- { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
- { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
- { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
- { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
- { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
- { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
- { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
- { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
- { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
- { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
- { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
- { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
- { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
- { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
- { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
{ 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a },
{ 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 },
{ 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
@@ -3050,8 +2718,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
- { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
- { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
/* AFAVLAB_TK9902 */
{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
@@ -3155,16 +2821,12 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
if (irq == IRQ_NONE) {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi);
+ id->vendor, id->device, io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi, irq);
+ id->vendor, id->device, io_lo, io_hi, irq);
}
data->ports[count] =
parport_pc_probe_port(io_lo, io_hi, irq,
@@ -3189,13 +2851,11 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
return -ENODEV;
}
-static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
+static void parport_pc_pci_remove(struct pci_dev *dev)
{
struct pci_parport_data *data = pci_get_drvdata(dev);
int i;
- pci_set_drvdata(dev, NULL);
-
if (data) {
for (i = data->num - 1; i >= 0; i--)
parport_pc_unregister_port(data->ports[i]);
@@ -3208,7 +2868,7 @@ static struct pci_driver parport_pc_pci_driver = {
.name = "parport_pc",
.id_table = parport_pc_pci_tbl,
.probe = parport_pc_pci_probe,
- .remove = __devexit_p(parport_pc_pci_remove),
+ .remove = parport_pc_pci_remove,
};
static int __init parport_pc_init_superio(int autoirq, int autodma)
@@ -3312,7 +2972,7 @@ static struct pnp_driver parport_pc_pnp_driver = {
static struct pnp_driver parport_pc_pnp_driver;
#endif /* CONFIG_PNP */
-static int __devinit parport_pc_platform_probe(struct platform_device *pdev)
+static int parport_pc_platform_probe(struct platform_device *pdev)
{
/* Always succeed, the actual probing is done in
* parport_pc_probe_port(). */
@@ -3328,7 +2988,7 @@ static struct platform_driver parport_pc_platform_driver = {
};
/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
-static int __devinit __attribute__((unused))
+static int __attribute__((unused))
parport_pc_find_isa_ports(int autoirq, int autodma)
{
int count = 0;
@@ -3457,8 +3117,8 @@ static int __init parport_init_mode_setup(char *str)
#endif
#ifdef MODULE
-static const char *irq[PARPORT_PC_MAX_PORTS];
-static const char *dma[PARPORT_PC_MAX_PORTS];
+static char *irq[PARPORT_PC_MAX_PORTS];
+static char *dma[PARPORT_PC_MAX_PORTS];
MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
module_param_array(io, int, NULL, 0);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index f01e26440f1..ee932004724 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -33,6 +33,9 @@ enum parport_pc_pci_cards {
netmos_9xx5_combo,
netmos_9855,
netmos_9855_2p,
+ netmos_9900,
+ netmos_9900_2p,
+ netmos_99xx_1p,
avlab_1s1p,
avlab_1s2p,
avlab_2s1p,
@@ -41,6 +44,27 @@ enum parport_pc_pci_cards {
siig_2p1s_20x,
siig_1s1p_20x,
siig_2s1p_20x,
+ timedia_4078a,
+ timedia_4079h,
+ timedia_4085h,
+ timedia_4088a,
+ timedia_4089a,
+ timedia_4095a,
+ timedia_4096a,
+ timedia_4078u,
+ timedia_4079a,
+ timedia_4085u,
+ timedia_4079r,
+ timedia_4079s,
+ timedia_4079d,
+ timedia_4079e,
+ timedia_4079f,
+ timedia_9079a,
+ timedia_9079b,
+ timedia_9079c,
+ wch_ch353_1s1p,
+ wch_ch353_2s1p,
+ sunix_2s1p,
};
/* each element directly indexed from enum list, above */
@@ -65,38 +89,40 @@ struct parport_pc_pci {
struct parport_pc_pci *card, int failed);
};
-static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
+static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par,
+ int autoirq, int autodma)
{
/* the rule described below doesn't hold for this device */
if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return -ENODEV;
- /*
- * Netmos uses the subdevice ID to indicate the number of parallel
- * and serial ports. The form is 0x00PS, where <P> is the number of
- * parallel ports and <S> is the number of serial ports.
- */
- par->numports = (dev->subsystem_device & 0xf0) >> 4;
- if (par->numports > ARRAY_SIZE(par->addr))
- par->numports = ARRAY_SIZE(par->addr);
- /*
- * This function is currently only called for cards with up to
- * one parallel port.
- * Parallel port BAR is either before or after serial ports BARS;
- * hence, lo should be either 0 or equal to the number of serial ports.
- */
- if (par->addr[0].lo != 0)
- par->addr[0].lo = dev->subsystem_device & 0xf;
+
+ if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
+ par->numports = 1;
+ } else {
+ /*
+ * Netmos uses the subdevice ID to indicate the number of parallel
+ * and serial ports. The form is 0x00PS, where <P> is the number of
+ * parallel ports and <S> is the number of serial ports.
+ */
+ par->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (par->numports > ARRAY_SIZE(par->addr))
+ par->numports = ARRAY_SIZE(par->addr);
+ }
+
return 0;
}
-static struct parport_pc_pci cards[] __devinitdata = {
+static struct parport_pc_pci cards[] = {
/* titan_110l */ { 1, { { 3, -1 }, } },
/* titan_210l */ { 1, { { 3, -1 }, } },
/* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
/* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
/* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* netmos_9900 */ {1, { { 3, 4 }, }, netmos_parallel_init },
+ /* netmos_9900_2p */ {2, { { 0, 1 }, { 3, 4 }, } },
+ /* netmos_99xx_1p */ {1, { { 0, 1 }, } },
/* avlab_1s1p */ { 1, { { 1, 2}, } },
/* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
/* avlab_2s1p */ { 1, { { 2, 3}, } },
@@ -105,8 +131,32 @@ static struct parport_pc_pci cards[] __devinitdata = {
/* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
/* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
/* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
+ /* timedia_4078a */ { 1, { { 2, -1 }, } },
+ /* timedia_4079h */ { 1, { { 2, 3 }, } },
+ /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
+ /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
+ /* timedia_4078u */ { 1, { { 2, -1 }, } },
+ /* timedia_4079a */ { 1, { { 2, 3 }, } },
+ /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
+ /* timedia_4079r */ { 1, { { 2, 3 }, } },
+ /* timedia_4079s */ { 1, { { 2, 3 }, } },
+ /* timedia_4079d */ { 1, { { 2, 3 }, } },
+ /* timedia_4079e */ { 1, { { 2, 3 }, } },
+ /* timedia_4079f */ { 1, { { 2, 3 }, } },
+ /* timedia_9079a */ { 1, { { 2, 3 }, } },
+ /* timedia_9079b */ { 1, { { 2, 3 }, } },
+ /* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
+ /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
+ /* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
+#define PCI_VENDOR_ID_SUNIX 0x1fd4
+#define PCI_DEVICE_ID_SUNIX_1999 0x1999
+
static struct pci_device_id parport_serial_pci_tbl[] = {
/* PCI cards */
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
@@ -127,6 +177,14 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
0x1000, 0x0022, 0, 0, netmos_9855_2p },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3011, 0, 0, netmos_9900 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3012, 0, 0, netmos_9900 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3020, 0, 0, netmos_9900_2p },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+ 0xA000, 0x2000, 0, 0, netmos_99xx_1p },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
@@ -176,6 +234,37 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+ /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
+ { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
+ { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
+ { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
+ { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
+ { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
+ { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
+ { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
+ { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
+ { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
+ { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
+ { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
+ { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
+ { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
+ { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
+ { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
+ { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
+ { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
+ { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
+
+ /* WCH CARDS */
+ { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
+ { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
+
+ /*
+ * More SUNIX variations. At least one of these has part number
+ * '5079A but subdevice 0x102. That board reports 0x0708 as
+ * its PCI Class.
+ */
+ { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
+ 0x0102, 0, 0, sunix_2s1p },
{ 0, } /* terminate list */
};
@@ -188,7 +277,7 @@ MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
* Cards not tested are marked n/t
* If you have one of these cards and it works for you, please tell me..
*/
-static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
+static struct pciserial_board pci_parport_serial_boards[] = {
[titan_110l] = {
.flags = FL_BASE1 | FL_BASE_BARS,
.num_ports = 1,
@@ -219,6 +308,24 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
.base_baud = 115200,
.uart_offset = 8,
},
+ [netmos_9900] = { /* n/t */
+ .flags = FL_BASE0 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [netmos_9900_2p] = { /* parallel only */ /* n/t */
+ .flags = FL_BASE0,
+ .num_ports = 0,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [netmos_99xx_1p] = { /* parallel only */ /* n/t */
+ .flags = FL_BASE0,
+ .num_ports = 0,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[avlab_1s1p] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
@@ -267,6 +374,132 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [timedia_4078a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079h] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4085h] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4088a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4089a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4095a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4096a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4078u] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4085u] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079r] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079s] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079d] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079e] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_4079f] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_9079a] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_9079b] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [timedia_9079c] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [wch_ch353_1s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [wch_ch353_2s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [sunix_2s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
};
struct parport_serial_private {
@@ -277,14 +510,17 @@ struct parport_serial_private {
};
/* Register the serial port(s) of a PCI card. */
-static int __devinit serial_register (struct pci_dev *dev,
- const struct pci_device_id *id)
+static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
{
struct parport_serial_private *priv = pci_get_drvdata (dev);
struct pciserial_board *board;
struct serial_private *serial;
board = &pci_parport_serial_boards[id->driver_data];
+
+ if (board->num_ports == 0)
+ return 0;
+
serial = pciserial_init_ports(dev, board);
if (IS_ERR(serial))
@@ -295,8 +531,7 @@ static int __devinit serial_register (struct pci_dev *dev,
}
/* Register the parallel port(s) of a PCI card. */
-static int __devinit parport_register (struct pci_dev *dev,
- const struct pci_device_id *id)
+static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
{
struct parport_pc_pci *card;
struct parport_serial_private *priv = pci_get_drvdata (dev);
@@ -357,8 +592,8 @@ static int __devinit parport_register (struct pci_dev *dev,
return 0;
}
-static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
- const struct pci_device_id *id)
+static int parport_serial_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct parport_serial_private *priv;
int err;
@@ -370,13 +605,11 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
err = pci_enable_device (dev);
if (err) {
- pci_set_drvdata (dev, NULL);
kfree (priv);
return err;
}
if (parport_register (dev, id)) {
- pci_set_drvdata (dev, NULL);
kfree (priv);
return -ENODEV;
}
@@ -385,7 +618,6 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
int i;
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
- pci_set_drvdata (dev, NULL);
kfree (priv);
return -ENODEV;
}
@@ -393,13 +625,11 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
return 0;
}
-static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
+static void parport_serial_pci_remove(struct pci_dev *dev)
{
struct parport_serial_private *priv = pci_get_drvdata (dev);
int i;
- pci_set_drvdata(dev, NULL);
-
// Serial ports
if (priv->serial)
pciserial_remove_ports(priv->serial);
@@ -458,7 +688,7 @@ static struct pci_driver parport_serial_pci_driver = {
.name = "parport_serial",
.id_table = parport_serial_pci_tbl,
.probe = parport_serial_pci_probe,
- .remove = __devexit_p(parport_serial_pci_remove),
+ .remove = parport_serial_pci_remove,
#ifdef CONFIG_PM
.suspend = parport_serial_pci_suspend,
.resume = parport_serial_pci_resume,
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 55ba118f1cf..dffd6d0bd15 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -82,27 +82,6 @@ static unsigned char parport_sunbpp_read_data(struct parport *p)
return sbus_readb(&regs->p_dr);
}
-#if 0
-static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
-{
- struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
- unsigned char value_tcr = sbus_readb(&regs->p_tcr);
- unsigned char value_or = sbus_readb(&regs->p_or);
-
- if (status & PARPORT_CONTROL_STROBE)
- value_tcr |= P_TCR_DS;
- if (status & PARPORT_CONTROL_AUTOFD)
- value_or |= P_OR_AFXN;
- if (status & PARPORT_CONTROL_INIT)
- value_or |= P_OR_INIT;
- if (status & PARPORT_CONTROL_SELECT)
- value_or |= P_OR_SLCT_IN;
-
- sbus_writeb(value_or, &regs->p_or);
- sbus_writeb(value_tcr, &regs->p_tcr);
-}
-#endif
-
static unsigned char status_sunbpp_to_pc(struct parport *p)
{
struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
@@ -286,7 +265,7 @@ static struct parport_operations parport_sunbpp_ops =
.owner = THIS_MODULE,
};
-static int __devinit bpp_probe(struct platform_device *op, const struct of_device_id *match)
+static int bpp_probe(struct platform_device *op)
{
struct parport_operations *ops;
struct bpp_regs __iomem *regs;
@@ -305,12 +284,11 @@ static int __devinit bpp_probe(struct platform_device *op, const struct of_devic
size = resource_size(&op->resource[0]);
dma = PARPORT_DMA_NONE;
- ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+ ops = kmemdup(&parport_sunbpp_ops, sizeof(struct parport_operations),
+ GFP_KERNEL);
if (!ops)
goto out_unmap;
- memcpy (ops, &parport_sunbpp_ops, sizeof(struct parport_operations));
-
dprintk(("register_port\n"));
if (!(p = parport_register_port((unsigned long)base, irq, dma, ops)))
goto out_free_ops;
@@ -351,7 +329,7 @@ out_unmap:
return err;
}
-static int __devexit bpp_remove(struct platform_device *op)
+static int bpp_remove(struct platform_device *op)
{
struct parport *p = dev_get_drvdata(&op->dev);
struct parport_operations *ops = p->ops;
@@ -381,31 +359,20 @@ static const struct of_device_id bpp_match[] = {
MODULE_DEVICE_TABLE(of, bpp_match);
-static struct of_platform_driver bpp_sbus_driver = {
+static struct platform_driver bpp_sbus_driver = {
.driver = {
.name = "bpp",
.owner = THIS_MODULE,
.of_match_table = bpp_match,
},
.probe = bpp_probe,
- .remove = __devexit_p(bpp_remove),
+ .remove = bpp_remove,
};
-static int __init parport_sunbpp_init(void)
-{
- return of_register_platform_driver(&bpp_sbus_driver);
-}
-
-static void __exit parport_sunbpp_exit(void)
-{
- of_unregister_platform_driver(&bpp_sbus_driver);
-}
+module_platform_driver(bpp_sbus_driver);
MODULE_AUTHOR("Derrick J Brashear");
MODULE_DESCRIPTION("Parport Driver for Sparc bidirectional Port");
MODULE_SUPPORTED_DEVICE("Sparc Bidirectional Parallel Port");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");
-
-module_init(parport_sunbpp_init)
-module_exit(parport_sunbpp_exit)
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index 3f56bc086cb..3b470801a04 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -31,7 +31,7 @@
#define PARPORT_MIN_SPINTIME_VALUE 1
#define PARPORT_MAX_SPINTIME_VALUE 1000
-static int do_active_device(ctl_table *table, int write,
+static int do_active_device(struct ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
@@ -68,7 +68,7 @@ static int do_active_device(ctl_table *table, int write,
}
#ifdef CONFIG_PARPORT_1284
-static int do_autoprobe(ctl_table *table, int write,
+static int do_autoprobe(struct ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport_device_info *info = table->extra2;
@@ -110,9 +110,9 @@ static int do_autoprobe(ctl_table *table, int write,
}
#endif /* IEEE1284.3 support. */
-static int do_hardware_base_addr (ctl_table *table, int write,
- void __user *result,
- size_t *lenp, loff_t *ppos)
+static int do_hardware_base_addr(struct ctl_table *table, int write,
+ void __user *result,
+ size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
char buffer[20];
@@ -138,9 +138,9 @@ static int do_hardware_base_addr (ctl_table *table, int write,
return copy_to_user(result, buffer, len) ? -EFAULT : 0;
}
-static int do_hardware_irq (ctl_table *table, int write,
- void __user *result,
- size_t *lenp, loff_t *ppos)
+static int do_hardware_irq(struct ctl_table *table, int write,
+ void __user *result,
+ size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
char buffer[20];
@@ -166,9 +166,9 @@ static int do_hardware_irq (ctl_table *table, int write,
return copy_to_user(result, buffer, len) ? -EFAULT : 0;
}
-static int do_hardware_dma (ctl_table *table, int write,
- void __user *result,
- size_t *lenp, loff_t *ppos)
+static int do_hardware_dma(struct ctl_table *table, int write,
+ void __user *result,
+ size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
char buffer[20];
@@ -194,9 +194,9 @@ static int do_hardware_dma (ctl_table *table, int write,
return copy_to_user(result, buffer, len) ? -EFAULT : 0;
}
-static int do_hardware_modes (ctl_table *table, int write,
- void __user *result,
- size_t *lenp, loff_t *ppos)
+static int do_hardware_modes(struct ctl_table *table, int write,
+ void __user *result,
+ size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
char buffer[40];
@@ -255,11 +255,11 @@ PARPORT_MAX_SPINTIME_VALUE;
struct parport_sysctl_table {
struct ctl_table_header *sysctl_header;
- ctl_table vars[12];
- ctl_table device_dir[2];
- ctl_table port_dir[2];
- ctl_table parport_dir[2];
- ctl_table dev_dir[2];
+ struct ctl_table vars[12];
+ struct ctl_table device_dir[2];
+ struct ctl_table port_dir[2];
+ struct ctl_table parport_dir[2];
+ struct ctl_table dev_dir[2];
};
static const struct parport_sysctl_table parport_sysctl_template = {
@@ -369,12 +369,12 @@ static const struct parport_sysctl_table parport_sysctl_template = {
struct parport_device_sysctl_table
{
struct ctl_table_header *sysctl_header;
- ctl_table vars[2];
- ctl_table device_dir[2];
- ctl_table devices_root_dir[2];
- ctl_table port_dir[2];
- ctl_table parport_dir[2];
- ctl_table dev_dir[2];
+ struct ctl_table vars[2];
+ struct ctl_table device_dir[2];
+ struct ctl_table devices_root_dir[2];
+ struct ctl_table port_dir[2];
+ struct ctl_table parport_dir[2];
+ struct ctl_table dev_dir[2];
};
static const struct parport_device_sysctl_table
@@ -422,10 +422,10 @@ parport_device_sysctl_template = {
struct parport_default_sysctl_table
{
struct ctl_table_header *sysctl_header;
- ctl_table vars[3];
- ctl_table default_dir[2];
- ctl_table parport_dir[2];
- ctl_table dev_dir[2];
+ struct ctl_table vars[3];
+ struct ctl_table default_dir[2];
+ struct ctl_table parport_dir[2];
+ struct ctl_table dev_dir[2];
};
static struct parport_default_sysctl_table
@@ -476,10 +476,9 @@ int parport_proc_register(struct parport *port)
struct parport_sysctl_table *t;
int i;
- t = kmalloc(sizeof(*t), GFP_KERNEL);
+ t = kmemdup(&parport_sysctl_template, sizeof(*t), GFP_KERNEL);
if (t == NULL)
return -ENOMEM;
- memcpy(t, &parport_sysctl_template, sizeof(*t));
t->device_dir[0].extra1 = port;
@@ -523,10 +522,9 @@ int parport_device_proc_register(struct pardevice *device)
struct parport_device_sysctl_table *t;
struct parport * port = device->port;
- t = kmalloc(sizeof(*t), GFP_KERNEL);
+ t = kmemdup(&parport_device_sysctl_template, sizeof(*t), GFP_KERNEL);
if (t == NULL)
return -ENOMEM;
- memcpy(t, &parport_device_sysctl_template, sizeof(*t));
t->dev_dir[0].child = t->parport_dir;
t->parport_dir[0].child = t->port_dir;
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index a2d9d1e5926..3fa66244ce3 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -282,14 +282,13 @@ struct parport *parport_register_port(unsigned long base, int irq, int dma,
int device;
char *name;
- tmp = kmalloc(sizeof(struct parport), GFP_KERNEL);
+ tmp = kzalloc(sizeof(struct parport), GFP_KERNEL);
if (!tmp) {
printk(KERN_WARNING "parport: memory squeeze\n");
return NULL;
}
/* Init our structure */
- memset(tmp, 0, sizeof(struct parport));
tmp->base = base;
tmp->irq = irq;
tmp->dma = dma;
@@ -678,7 +677,7 @@ void parport_unregister_device(struct pardevice *dev)
/* Make sure we haven't left any pointers around in the wait
* list. */
- spin_lock (&port->waitlist_lock);
+ spin_lock_irq(&port->waitlist_lock);
if (dev->waitprev || dev->waitnext || port->waithead == dev) {
if (dev->waitprev)
dev->waitprev->waitnext = dev->waitnext;
@@ -689,7 +688,7 @@ void parport_unregister_device(struct pardevice *dev)
else
port->waittail = dev->waitprev;
}
- spin_unlock (&port->waitlist_lock);
+ spin_unlock_irq(&port->waitlist_lock);
kfree(dev->state);
kfree(dev);
@@ -906,7 +905,8 @@ int parport_claim_or_block(struct pardevice *dev)
/* If dev->waiting is clear now, an interrupt
gave us the port and we would deadlock if we slept. */
if (dev->waiting) {
- interruptible_sleep_on (&dev->wait_q);
+ wait_event_interruptible(dev->wait_q,
+ !dev->waiting);
if (signal_pending (current)) {
return -EINTR;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 20:18:35 +0000