aboutsummaryrefslogtreecommitdiff
path: root/drivers/parport/parport_pc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parport/parport_pc.c')
-rw-r--r--drivers/parport/parport_pc.c375
1 files changed, 44 insertions, 331 deletions
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 0cb64f50cec..76ee7750bc5 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -197,54 +197,6 @@ static int change_mode(struct parport *p, int m)
ECR_WRITE(p, oecr);
return 0;
}
-
-#ifdef CONFIG_PARPORT_1284
-/* Find FIFO lossage; FIFO is reset */
-#if 0
-static int get_fifo_residue(struct parport *p)
-{
- int residue;
- int cnfga;
- const struct parport_pc_private *priv = p->physport->private_data;
-
- /* Adjust for the contents of the FIFO. */
- for (residue = priv->fifo_depth; ; residue--) {
- if (inb(ECONTROL(p)) & 0x2)
- /* Full up. */
- break;
-
- outb(0, FIFO(p));
- }
-
- printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
- residue);
-
- /* Reset the FIFO. */
- frob_set_mode(p, ECR_PS2);
-
- /* Now change to config mode and clean up. FIXME */
- frob_set_mode(p, ECR_CNF);
- cnfga = inb(CONFIGA(p));
- printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
-
- if (!(cnfga & (1<<2))) {
- printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
- residue++;
- }
-
- /* Don't care about partial PWords until support is added for
- * PWord != 1 byte. */
-
- /* Back to PS2 mode. */
- frob_set_mode(p, ECR_PS2);
-
- DPRINTK(KERN_DEBUG
- "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
- inb(ECONTROL(p)));
- return residue;
-}
-#endif /* 0 */
-#endif /* IEEE 1284 support */
#endif /* FIFO support */
/*
@@ -940,234 +892,6 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
return written;
}
-
-#if 0
-static size_t parport_pc_ecp_read_block_pio(struct parport *port,
- void *buf, size_t length,
- int flags)
-{
- size_t left = length;
- size_t fifofull;
- int r;
- const int fifo = FIFO(port);
- const struct parport_pc_private *priv = port->physport->private_data;
- const int fifo_depth = priv->fifo_depth;
- char *bufp = buf;
-
- port = port->physport;
- DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
- dump_parport_state("enter fcn", port);
-
- /* Special case: a timeout of zero means we cannot call schedule().
- * Also if O_NONBLOCK is set then use the default implementation. */
- if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
- /* If the peripheral is allowed to send RLE compressed
- * data, it is possible for a byte to expand to 128
- * bytes in the FIFO. */
- fifofull = 128;
- } else {
- fifofull = fifo_depth;
- }
-
- /* If the caller wants less than a full FIFO's worth of data,
- * go through software emulation. Otherwise we may have to throw
- * away data. */
- if (length < fifofull)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
- /* change to reverse-idle phase (must be in forward-idle) */
-
- /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control(port,
- PARPORT_CONTROL_AUTOFD
- | PARPORT_CONTROL_STROBE,
- PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse(port); /* Must be in PS2 mode */
- udelay(5);
- /* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control(port,
- PARPORT_CONTROL_INIT,
- 0);
- /* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
- "in ecp_read_block_pio\n", port->name, r);
- return 0;
- }
- }
-
- /* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control(port,
- PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD); */
- r = change_mode(port, ECR_ECP); /* ECP FIFO */
- if (r)
- printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
- port->name);
-
- port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-
- /* the first byte must be collected manually */
- dump_parport_state("pre 43", port);
- /* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
- if (r) {
- /* timed out while reading -- no data */
- printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
- goto out_no_data;
- }
- /* read byte */
- *bufp++ = inb(DATA(port));
- left--;
- dump_parport_state("43-44", port);
- /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- 0);
- dump_parport_state("pre 45", port);
- /* Event 45: Wait for nAck to go high */
- /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
- PARPORT_STATUS_ACK); */
- dump_parport_state("post 45", port);
- r = 0;
- if (r) {
- /* timed out while waiting for peripheral to respond to ack */
- printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
-
- /* keep hold of the byte we've got already */
- goto out_no_data;
- }
- /* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
-
-
- dump_parport_state("rev idle", port);
- /* Do the transfer. */
- while (left > fifofull) {
- int ret;
- unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb(ECONTROL(port));
-
- if (need_resched() && time_before(jiffies, expire))
- /* Can't yield the port. */
- schedule();
-
- /* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
-
- if (ecrval & 0x01) {
- /* FIFO is empty. Wait for interrupt. */
- dump_parport_state("FIFO empty", port);
-
- /* Anyone else waiting for the port? */
- if (port->waithead) {
- printk(KERN_DEBUG "Somebody wants the port\n");
- break;
- }
-
- /* Clear serviceIntr */
- ECR_WRITE(port, ecrval & ~(1<<2));
-false_alarm:
- dump_parport_state("waiting", port);
- ret = parport_wait_event(port, HZ);
- DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
- ret);
- if (ret < 0)
- break;
- ret = 0;
- if (!time_before(jiffies, expire)) {
- /* Timed out. */
- dump_parport_state("timeout", port);
- printk(KERN_DEBUG "PIO read timed out\n");
- break;
- }
- ecrval = inb(ECONTROL(port));
- if (!(ecrval & (1<<2))) {
- if (need_resched() &&
- time_before(jiffies, expire)) {
- schedule();
- }
- goto false_alarm;
- }
-
- /* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
- continue;
- }
-
- if (ecrval & 0x02) {
- /* FIFO is full. */
- dump_parport_state("FIFO full", port);
- insb(fifo, bufp, fifo_depth);
- bufp += fifo_depth;
- left -= fifo_depth;
- continue;
- }
-
- DPRINTK(KERN_DEBUG
- "*** ecp_read_block_pio: reading one byte from the FIFO\n");
-
- /* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb(fifo);
- left--;
- }
-
- /* scoop up anything left in the FIFO */
- while (left && !(inb(ECONTROL(port) & 0x01))) {
- *bufp++ = inb(fifo);
- left--;
- }
-
- port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- dump_parport_state("rev idle2", port);
-
-out_no_data:
-
- /* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
-
- /* event 49: PError goes high */
- r = parport_wait_peripheral(port,
- PARPORT_STATUS_PAPEROUT,
- PARPORT_STATUS_PAPEROUT);
- if (r) {
- printk(KERN_DEBUG
- "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
- port->name, r);
- }
-
- port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-
- /* Finish up. */
- {
- int lost = get_fifo_residue(port);
- if (lost)
- /* Shouldn't happen with compliant peripherals. */
- printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
- port->name, lost);
- }
-
- dump_parport_state("fwd idle", port);
- return length - left;
-}
-#endif /* 0 */
#endif /* IEEE 1284 support */
#endif /* Allowed to use FIFO/DMA */
@@ -1229,7 +953,7 @@ static struct superio_struct *find_free_superio(void)
/* Super-IO chipset detection, Winbond, SMSC */
-static void __devinit show_parconfig_smsc37c669(int io, int key)
+static void show_parconfig_smsc37c669(int io, int key)
{
int cr1, cr4, cra, cr23, cr26, cr27;
struct superio_struct *s;
@@ -1314,7 +1038,7 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
}
-static void __devinit show_parconfig_winbond(int io, int key)
+static void show_parconfig_winbond(int io, int key)
{
int cr30, cr60, cr61, cr70, cr74, crf0;
struct superio_struct *s;
@@ -1382,8 +1106,7 @@ static void __devinit show_parconfig_winbond(int io, int key)
}
}
-static void __devinit decode_winbond(int efer, int key, int devid,
- int devrev, int oldid)
+static void decode_winbond(int efer, int key, int devid, int devrev, int oldid)
{
const char *type = "unknown";
int id, progif = 2;
@@ -1435,7 +1158,7 @@ static void __devinit decode_winbond(int efer, int key, int devid,
show_parconfig_winbond(efer, key);
}
-static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
+static void decode_smsc(int efer, int key, int devid, int devrev)
{
const char *type = "unknown";
void (*func)(int io, int key);
@@ -1469,7 +1192,7 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
}
-static void __devinit winbond_check(int io, int key)
+static void winbond_check(int io, int key)
{
int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
@@ -1507,7 +1230,7 @@ out:
release_region(io, 3);
}
-static void __devinit winbond_check2(int io, int key)
+static void winbond_check2(int io, int key)
{
int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
@@ -1548,7 +1271,7 @@ out:
release_region(io, 3);
}
-static void __devinit smsc_check(int io, int key)
+static void smsc_check(int io, int key)
{
int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
@@ -1592,7 +1315,7 @@ out:
}
-static void __devinit detect_and_report_winbond(void)
+static void detect_and_report_winbond(void)
{
if (verbose_probing)
printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
@@ -1605,7 +1328,7 @@ static void __devinit detect_and_report_winbond(void)
winbond_check2(0x250, 0x89);
}
-static void __devinit detect_and_report_smsc(void)
+static void detect_and_report_smsc(void)
{
if (verbose_probing)
printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
@@ -1615,7 +1338,7 @@ static void __devinit detect_and_report_smsc(void)
smsc_check(0x370, 0x44);
}
-static void __devinit detect_and_report_it87(void)
+static void detect_and_report_it87(void)
{
u16 dev;
u8 origval, r;
@@ -2072,24 +1795,24 @@ static int parport_ECPEPP_supported(struct parport *pb)
#else /* No IEEE 1284 support */
/* Don't bother probing for modes we know we won't use. */
-static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
+static int parport_PS2_supported(struct parport *pb) { return 0; }
#ifdef CONFIG_PARPORT_PC_FIFO
static int parport_ECP_supported(struct parport *pb)
{
return 0;
}
#endif
-static int __devinit parport_EPP_supported(struct parport *pb)
+static int parport_EPP_supported(struct parport *pb)
{
return 0;
}
-static int __devinit parport_ECPEPP_supported(struct parport *pb)
+static int parport_ECPEPP_supported(struct parport *pb)
{
return 0;
}
-static int __devinit parport_ECPPS2_supported(struct parport *pb)
+static int parport_ECPPS2_supported(struct parport *pb)
{
return 0;
}
@@ -2281,6 +2004,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
struct resource *ECR_res = NULL;
struct resource *EPP_res = NULL;
struct platform_device *pdev = NULL;
+ int ret;
if (!dev) {
/* We need a physical device to attach to, but none was
@@ -2291,8 +2015,11 @@ struct parport *parport_pc_probe_port(unsigned long int base,
return NULL;
dev = &pdev->dev;
- dev->coherent_dma_mask = DMA_BIT_MASK(24);
- dev->dma_mask = &dev->coherent_dma_mask;
+ ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(24));
+ if (ret) {
+ dev_err(dev, "Unable to set coherent dma mask: disabling DMA\n");
+ dma = PARPORT_DMA_NONE;
+ }
}
ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
@@ -2351,7 +2078,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
if (p->base_hi && priv->ecr)
- printk(" (0x%lx)", p->base_hi);
+ printk(KERN_CONT " (0x%lx)", p->base_hi);
if (p->irq == PARPORT_IRQ_AUTO) {
p->irq = PARPORT_IRQ_NONE;
parport_irq_probe(p);
@@ -2362,7 +2089,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
p->irq = PARPORT_IRQ_NONE;
}
if (p->irq != PARPORT_IRQ_NONE) {
- printk(", irq %d", p->irq);
+ printk(KERN_CONT ", irq %d", p->irq);
priv->ctr_writable |= 0x10;
if (p->dma == PARPORT_DMA_AUTO) {
@@ -2386,21 +2113,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
#endif /* IEEE 1284 support */
if (p->dma != PARPORT_DMA_NONE) {
- printk(", dma %d", p->dma);
+ printk(KERN_CONT ", dma %d", p->dma);
p->modes |= PARPORT_MODE_DMA;
} else
- printk(", using FIFO");
+ printk(KERN_CONT ", using FIFO");
} else
/* We can't use the DMA channel after all. */
p->dma = PARPORT_DMA_NONE;
#endif /* Allowed to use FIFO/DMA */
- printk(" [");
+ printk(KERN_CONT " [");
#define printmode(x) \
{\
if (p->modes & PARPORT_MODE_##x) {\
- printk("%s%s", f ? "," : "", #x);\
+ printk(KERN_CONT "%s%s", f ? "," : "", #x);\
f++;\
} \
}
@@ -2416,9 +2143,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
}
#undef printmode
#ifndef CONFIG_PARPORT_1284
- printk("(,...)");
+ printk(KERN_CONT "(,...)");
#endif /* CONFIG_PARPORT_1284 */
- printk("]\n");
+ printk(KERN_CONT "]\n");
if (probedirq != PARPORT_IRQ_NONE)
printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
@@ -2545,9 +2272,8 @@ EXPORT_SYMBOL(parport_pc_unregister_port);
#ifdef CONFIG_PCI
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
-static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
- int autodma,
- const struct parport_pc_via_data *via)
+static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
+ const struct parport_pc_via_data *via)
{
short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
u32 ite8872set;
@@ -2653,10 +2379,10 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
-static int __devinitdata parport_init_mode;
+static int parport_init_mode;
/* Data for two known VIA chips */
-static struct parport_pc_via_data via_686a_data __devinitdata = {
+static struct parport_pc_via_data via_686a_data = {
0x51,
0x50,
0x85,
@@ -2665,7 +2391,7 @@ static struct parport_pc_via_data via_686a_data __devinitdata = {
0xF0,
0xE6
};
-static struct parport_pc_via_data via_8231_data __devinitdata = {
+static struct parport_pc_via_data via_8231_data = {
0x45,
0x44,
0x50,
@@ -2675,9 +2401,8 @@ static struct parport_pc_via_data via_8231_data __devinitdata = {
0xF6
};
-static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
- int autodma,
- const struct parport_pc_via_data *via)
+static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
+ const struct parport_pc_via_data *via)
{
u8 tmp, tmp2, siofunc;
u8 ppcontrol = 0;
@@ -2851,7 +2576,7 @@ static struct parport_pc_superio {
int (*probe) (struct pci_dev *pdev, int autoirq, int autodma,
const struct parport_pc_via_data *via);
const struct parport_pc_via_data *via;
-} parport_pc_superio_info[] __devinitdata = {
+} parport_pc_superio_info[] = {
{ sio_via_probe, &via_686a_data, },
{ sio_via_probe, &via_8231_data, },
{ sio_ite_8872_probe, NULL, },
@@ -2875,8 +2600,6 @@ enum parport_pc_pci_cards {
syba_2p_epp,
syba_1p_ecp,
titan_010l,
- titan_1284p1,
- titan_1284p2,
avlab_1p,
avlab_2p,
oxsemi_952,
@@ -2935,8 +2658,6 @@ static struct parport_pc_pci {
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
- /* titan_1284p1 */ { 1, { { 0, 1 }, } },
- /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* avlab_1p */ { 1, { { 0, 1}, } },
/* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2952,8 +2673,8 @@ static struct parport_pc_pci {
/* netmos_9705 */ { 1, { { 0, -1 }, } },
/* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
- /* netmos_9805 */ { 1, { { 0, -1 }, } },
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* netmos_9805 */ { 1, { { 0, 1 }, } },
+ /* netmos_9815 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* netmos_9901 */ { 1, { { 0, -1 }, } },
/* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
@@ -2997,8 +2718,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
- { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
- { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
/* AFAVLAB_TK9902 */
{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
@@ -3102,16 +2821,12 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
if (irq == IRQ_NONE) {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi);
+ id->vendor, id->device, io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi, irq);
+ id->vendor, id->device, io_lo, io_hi, irq);
}
data->ports[count] =
parport_pc_probe_port(io_lo, io_hi, irq,
@@ -3136,13 +2851,11 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
return -ENODEV;
}
-static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
+static void parport_pc_pci_remove(struct pci_dev *dev)
{
struct pci_parport_data *data = pci_get_drvdata(dev);
int i;
- pci_set_drvdata(dev, NULL);
-
if (data) {
for (i = data->num - 1; i >= 0; i--)
parport_pc_unregister_port(data->ports[i]);
@@ -3155,7 +2868,7 @@ static struct pci_driver parport_pc_pci_driver = {
.name = "parport_pc",
.id_table = parport_pc_pci_tbl,
.probe = parport_pc_pci_probe,
- .remove = __devexit_p(parport_pc_pci_remove),
+ .remove = parport_pc_pci_remove,
};
static int __init parport_pc_init_superio(int autoirq, int autodma)
@@ -3259,7 +2972,7 @@ static struct pnp_driver parport_pc_pnp_driver = {
static struct pnp_driver parport_pc_pnp_driver;
#endif /* CONFIG_PNP */
-static int __devinit parport_pc_platform_probe(struct platform_device *pdev)
+static int parport_pc_platform_probe(struct platform_device *pdev)
{
/* Always succeed, the actual probing is done in
* parport_pc_probe_port(). */
@@ -3275,7 +2988,7 @@ static struct platform_driver parport_pc_platform_driver = {
};
/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
-static int __devinit __attribute__((unused))
+static int __attribute__((unused))
parport_pc_find_isa_ports(int autoirq, int autodma)
{
int count = 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 15:31:46 +0000