aboutsummaryrefslogtreecommitdiff
path: root/drivers/parisc/superio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parisc/superio.c')
-rw-r--r--drivers/parisc/superio.c124
1 files changed, 50 insertions, 74 deletions
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index ba971fecd0d..a042d065a0c 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -12,6 +12,7 @@
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
+ * (C) Copyright 2006 Helge Deller <deller@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -72,6 +73,7 @@
#include <linux/termios.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
#include <linux/delay.h>
#include <asm/io.h>
@@ -93,7 +95,7 @@ static struct superio_device sio_dev;
#define PFX SUPERIO ": "
static irqreturn_t
-superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
+superio_interrupt(int parent_irq, void *devp)
{
u8 results;
u8 local_irq;
@@ -137,7 +139,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
}
/* Call the appropriate device's interrupt */
- __do_IRQ(local_irq, regs);
+ generic_handle_irq(local_irq);
/* set EOI - forces a new interrupt if a lower priority device
* still needs service.
@@ -153,12 +155,13 @@ superio_init(struct pci_dev *pcidev)
struct superio_device *sio = &sio_dev;
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
+ int ret;
- if (sio->suckyio_irq_enabled)
+ if (sio->suckyio_irq_enabled)
return;
- if (!pdev) BUG();
- if (!sio->usb_pdev) BUG();
+ BUG_ON(!pdev);
+ BUG_ON(!sio->usb_pdev);
/* use the IRQ iosapic found for USB INT D... */
pdev->irq = sio->usb_pdev->irq;
@@ -166,7 +169,7 @@ superio_init(struct pci_dev *pcidev)
/* ...then properly fixup the USB to point at suckyio PIC */
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
- printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n",
pci_name(pdev), pdev->irq);
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
@@ -193,12 +196,13 @@ superio_init(struct pci_dev *pcidev)
request_region (sio->acpi_base, 0x1f, "acpi");
/* Enable the legacy I/O function */
- pci_read_config_word (pdev, PCI_COMMAND, &word);
+ pci_read_config_word (pdev, PCI_COMMAND, &word);
word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
pci_write_config_word (pdev, PCI_COMMAND, word);
pci_set_master (pdev);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ BUG_ON(ret < 0); /* not too much we can do about this... */
/*
* Next project is programming the onboard interrupt controllers.
@@ -270,7 +274,7 @@ superio_init(struct pci_dev *pcidev)
else
printk(KERN_ERR PFX "USB regulator not initialized!\n");
- if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
+ if (request_irq(pdev->irq, superio_interrupt, 0,
SUPERIO, (void *)sio)) {
printk(KERN_ERR PFX "could not get irq\n");
@@ -282,8 +286,9 @@ superio_init(struct pci_dev *pcidev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
-static void superio_disable_irq(unsigned int irq)
+static void superio_mask_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
@@ -299,8 +304,9 @@ static void superio_disable_irq(unsigned int irq)
outb (r8,IC_PIC1+1);
}
-static void superio_enable_irq(unsigned int irq)
+static void superio_unmask_irq(struct irq_data *d)
{
+ unsigned int irq = d->irq;
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
@@ -315,20 +321,10 @@ static void superio_enable_irq(unsigned int irq)
outb (r8,IC_PIC1+1);
}
-static unsigned int superio_startup_irq(unsigned int irq)
-{
- superio_enable_irq(irq);
- return 0;
-}
-
-static struct hw_interrupt_type superio_interrupt_type = {
- .typename = SUPERIO,
- .startup = superio_startup_irq,
- .shutdown = superio_disable_irq,
- .enable = superio_enable_irq,
- .disable = superio_disable_irq,
- .ack = no_ack_irq,
- .end = no_end_irq,
+static struct irq_chip superio_interrupt_type = {
+ .name = SUPERIO,
+ .irq_unmask = superio_unmask_irq,
+ .irq_mask = superio_mask_irq,
};
#ifdef DEBUG_SUPERIO_INIT
@@ -352,14 +348,15 @@ int superio_fixup_irq(struct pci_dev *pcidev)
BUG();
return -1;
}
- printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %p\n",
+ printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %pf\n",
pci_name(pcidev),
pcidev->vendor, pcidev->device,
__builtin_return_address(0));
#endif
for (i = 0; i < 16; i++) {
- irq_desc[i].handler = &superio_interrupt_type;
+ irq_set_chip_and_handler(i, &superio_interrupt_type,
+ handle_simple_irq);
}
/*
@@ -388,57 +385,48 @@ int superio_fixup_irq(struct pci_dev *pcidev)
return local_irq;
}
-static struct uart_port serial[] = {
- {
- .iotype = UPIO_PORT,
- .line = 0,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- },
- {
- .iotype = UPIO_PORT,
- .line = 1,
- .type = PORT_16550A,
- .uartclk = 115200*16,
- .fifosize = 16,
- }
-};
-
-static void __devinit superio_serial_init(void)
+static void __init superio_serial_init(void)
{
#ifdef CONFIG_SERIAL_8250
int retval;
-
- serial[0].iobase = sio_dev.sp1_base;
- serial[0].irq = SP1_IRQ;
- spin_lock_init(&serial[0].lock);
-
- retval = early_serial_setup(&serial[0]);
+ struct uart_port serial_port;
+
+ memset(&serial_port, 0, sizeof(serial_port));
+ serial_port.iotype = UPIO_PORT;
+ serial_port.type = PORT_16550A;
+ serial_port.uartclk = 115200*16;
+ serial_port.fifosize = 16;
+
+ /* serial port #1 */
+ serial_port.iobase = sio_dev.sp1_base;
+ serial_port.irq = SP1_IRQ;
+ serial_port.line = 0;
+ retval = early_serial_setup(&serial_port);
if (retval < 0) {
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
- serial[1].iobase = sio_dev.sp2_base;
- serial[1].irq = SP2_IRQ;
- spin_lock_init(&serial[1].lock);
- retval = early_serial_setup(&serial[1]);
-
+ /* serial port #2 */
+ serial_port.iobase = sio_dev.sp2_base;
+ serial_port.irq = SP2_IRQ;
+ serial_port.line = 1;
+ retval = early_serial_setup(&serial_port);
if (retval < 0)
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
}
-static void __devinit superio_parport_init(void)
+static void __init superio_parport_init(void)
{
#ifdef CONFIG_PARPORT_PC
if (!parport_pc_probe_port(sio_dev.pp_base,
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */) )
+ NULL /*struct pci_dev* */,
+ 0 /* shared irq flags */))
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
@@ -458,7 +446,7 @@ static void superio_fixup_pci(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
-static int __devinit
+static int __init
superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct superio_device *sio = &sio_dev;
@@ -474,8 +462,7 @@ superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev->subsystem_vendor, dev->subsystem_device,
dev->class);
- if (!sio->suckyio_irq_enabled)
- BUG(); /* Enabled by PCI_FIXUP_FINAL */
+ BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
superio_parport_init();
@@ -494,7 +481,7 @@ superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
-static struct pci_device_id superio_tbl[] = {
+static const struct pci_device_id superio_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
@@ -507,15 +494,4 @@ static struct pci_driver superio_driver = {
.probe = superio_probe,
};
-static int __init superio_modinit(void)
-{
- return pci_register_driver(&superio_driver);
-}
-
-static void __exit superio_exit(void)
-{
- pci_unregister_driver(&superio_driver);
-}
-
-module_init(superio_modinit);
-module_exit(superio_exit);
+module_pci_driver(superio_driver);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-08 14:32:35 +0000