diff options
Diffstat (limited to 'drivers/parisc/iosapic.c')
| -rw-r--r-- | drivers/parisc/iosapic.c | 127 |
1 files changed, 104 insertions, 23 deletions
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 0327894bf23..9ee04b4b68b 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -140,14 +140,13 @@ #include <asm/pdc.h> #include <asm/pdcpat.h> #include <asm/page.h> -#include <asm/system.h> #include <asm/io.h> /* read/write functions */ #ifdef CONFIG_SUPERIO #include <asm/superio.h> #endif #include <asm/ropes.h> -#include "./iosapic_private.h" +#include "iosapic_private.h" #define MODULE_NAME "iosapic" @@ -533,7 +532,7 @@ iosapic_xlate_pin(struct iosapic_info *isi, struct pci_dev *pcidev) intr_slot = PCI_SLOT(pcidev->devfn); } DBG_IRT("iosapic_xlate_pin: bus %d slot %d pin %d\n", - pcidev->bus->secondary, intr_slot, intr_pin); + pcidev->bus->busn_res.start, intr_slot, intr_pin); return irt_find_irqline(isi, intr_slot, intr_pin); } @@ -615,10 +614,10 @@ iosapic_set_irt_data( struct vector_info *vi, u32 *dp0, u32 *dp1) } -static void iosapic_mask_irq(unsigned int irq) +static void iosapic_mask_irq(struct irq_data *d) { unsigned long flags; - struct vector_info *vi = get_irq_chip_data(irq); + struct vector_info *vi = irq_data_get_irq_chip_data(d); u32 d0, d1; spin_lock_irqsave(&iosapic_lock, flags); @@ -628,9 +627,9 @@ static void iosapic_mask_irq(unsigned int irq) spin_unlock_irqrestore(&iosapic_lock, flags); } -static void iosapic_unmask_irq(unsigned int irq) +static void iosapic_unmask_irq(struct irq_data *d) { - struct vector_info *vi = get_irq_chip_data(irq); + struct vector_info *vi = irq_data_get_irq_chip_data(d); u32 d0, d1; /* data is initialized by fixup_irq */ @@ -666,34 +665,34 @@ printk("\n"); * enables their IRQ. It can lead to "interesting" race conditions * in the driver initialization sequence. */ - DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq, + DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", d->irq, vi->eoi_addr, vi->eoi_data); iosapic_eoi(vi->eoi_addr, vi->eoi_data); } -static void iosapic_eoi_irq(unsigned int irq) +static void iosapic_eoi_irq(struct irq_data *d) { - struct vector_info *vi = get_irq_chip_data(irq); + struct vector_info *vi = irq_data_get_irq_chip_data(d); iosapic_eoi(vi->eoi_addr, vi->eoi_data); - cpu_eoi_irq(irq); + cpu_eoi_irq(d); } #ifdef CONFIG_SMP -static int iosapic_set_affinity_irq(unsigned int irq, - const struct cpumask *dest) +static int iosapic_set_affinity_irq(struct irq_data *d, + const struct cpumask *dest, bool force) { - struct vector_info *vi = get_irq_chip_data(irq); + struct vector_info *vi = irq_data_get_irq_chip_data(d); u32 d0, d1, dummy_d0; unsigned long flags; int dest_cpu; - dest_cpu = cpu_check_affinity(irq, dest); + dest_cpu = cpu_check_affinity(d, dest); if (dest_cpu < 0) return -1; - cpumask_copy(irq_desc[irq].affinity, cpumask_of(dest_cpu)); - vi->txn_addr = txn_affinity_addr(irq, dest_cpu); + cpumask_copy(d->affinity, cpumask_of(dest_cpu)); + vi->txn_addr = txn_affinity_addr(d->irq, dest_cpu); spin_lock_irqsave(&iosapic_lock, flags); /* d1 contains the destination CPU, so only want to set that @@ -708,13 +707,13 @@ static int iosapic_set_affinity_irq(unsigned int irq, #endif static struct irq_chip iosapic_interrupt_type = { - .name = "IO-SAPIC-level", - .unmask = iosapic_unmask_irq, - .mask = iosapic_mask_irq, - .ack = cpu_ack_irq, - .eoi = iosapic_eoi_irq, + .name = "IO-SAPIC-level", + .irq_unmask = iosapic_unmask_irq, + .irq_mask = iosapic_mask_irq, + .irq_ack = cpu_ack_irq, + .irq_eoi = iosapic_eoi_irq, #ifdef CONFIG_SMP - .set_affinity = iosapic_set_affinity_irq, + .irq_set_affinity = iosapic_set_affinity_irq, #endif }; @@ -812,6 +811,86 @@ int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) return pcidev->irq; } +static struct iosapic_info *iosapic_list; + +#ifdef CONFIG_64BIT +int iosapic_serial_irq(struct parisc_device *dev) +{ + struct iosapic_info *isi; + struct irt_entry *irte; + struct vector_info *vi; + int cnt; + int intin; + + intin = (dev->mod_info >> 24) & 15; + + /* lookup IRT entry for isi/slot/pin set */ + for (cnt = 0; cnt < irt_num_entry; cnt++) { + irte = &irt_cell[cnt]; + if (COMPARE_IRTE_ADDR(irte, dev->mod0) && + irte->dest_iosapic_intin == intin) + break; + } + if (cnt >= irt_num_entry) + return 0; /* no irq found, force polling */ + + DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n", + irte, + irte->entry_type, + irte->entry_length, + irte->polarity_trigger, + irte->src_bus_irq_devno, + irte->src_bus_id, + irte->src_seg_id, + irte->dest_iosapic_intin, + (u32) irte->dest_iosapic_addr); + + /* search for iosapic */ + for (isi = iosapic_list; isi; isi = isi->isi_next) + if (isi->isi_hpa == dev->mod0) + break; + if (!isi) + return 0; /* no iosapic found, force polling */ + + /* get vector info for this input line */ + vi = isi->isi_vector + intin; + DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", iosapic_intin, vi); + + /* If this IRQ line has already been setup, skip it */ + if (vi->irte) + goto out; + + vi->irte = irte; + + /* + * Allocate processor IRQ + * + * XXX/FIXME The txn_alloc_irq() code and related code should be + * moved to enable_irq(). That way we only allocate processor IRQ + * bits for devices that actually have drivers claiming them. + * Right now we assign an IRQ to every PCI device present, + * regardless of whether it's used or not. + */ + vi->txn_irq = txn_alloc_irq(8); + + if (vi->txn_irq < 0) + panic("I/O sapic: couldn't get TXN IRQ\n"); + + /* enable_irq() will use txn_* to program IRdT */ + vi->txn_addr = txn_alloc_addr(vi->txn_irq); + vi->txn_data = txn_alloc_data(vi->txn_irq); + + vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI; + vi->eoi_data = cpu_to_le32(vi->txn_data); + + cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi); + + out: + + return vi->txn_irq; +} +#endif + /* ** squirrel away the I/O Sapic Version @@ -878,6 +957,8 @@ void *iosapic_register(unsigned long hpa) vip->irqline = (unsigned char) cnt; vip->iosapic = isi; } + isi->isi_next = iosapic_list; + iosapic_list = isi; return isi; } |