diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_conf.h | 919 |
1 files changed, 0 insertions, 919 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h deleted file mode 100644 index 565373ede26..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ /dev/null @@ -1,919 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho <luciano.coelho@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_CONF_H__ -#define __WL1271_CONF_H__ - -enum { - CONF_HW_BIT_RATE_1MBPS = BIT(0), - CONF_HW_BIT_RATE_2MBPS = BIT(1), - CONF_HW_BIT_RATE_5_5MBPS = BIT(2), - CONF_HW_BIT_RATE_6MBPS = BIT(3), - CONF_HW_BIT_RATE_9MBPS = BIT(4), - CONF_HW_BIT_RATE_11MBPS = BIT(5), - CONF_HW_BIT_RATE_12MBPS = BIT(6), - CONF_HW_BIT_RATE_18MBPS = BIT(7), - CONF_HW_BIT_RATE_22MBPS = BIT(8), - CONF_HW_BIT_RATE_24MBPS = BIT(9), - CONF_HW_BIT_RATE_36MBPS = BIT(10), - CONF_HW_BIT_RATE_48MBPS = BIT(11), - CONF_HW_BIT_RATE_54MBPS = BIT(12), - CONF_HW_BIT_RATE_MCS_0 = BIT(13), - CONF_HW_BIT_RATE_MCS_1 = BIT(14), - CONF_HW_BIT_RATE_MCS_2 = BIT(15), - CONF_HW_BIT_RATE_MCS_3 = BIT(16), - CONF_HW_BIT_RATE_MCS_4 = BIT(17), - CONF_HW_BIT_RATE_MCS_5 = BIT(18), - CONF_HW_BIT_RATE_MCS_6 = BIT(19), - CONF_HW_BIT_RATE_MCS_7 = BIT(20) -}; - -enum { - CONF_HW_RATE_INDEX_1MBPS = 0, - CONF_HW_RATE_INDEX_2MBPS = 1, - CONF_HW_RATE_INDEX_5_5MBPS = 2, - CONF_HW_RATE_INDEX_6MBPS = 3, - CONF_HW_RATE_INDEX_9MBPS = 4, - CONF_HW_RATE_INDEX_11MBPS = 5, - CONF_HW_RATE_INDEX_12MBPS = 6, - CONF_HW_RATE_INDEX_18MBPS = 7, - CONF_HW_RATE_INDEX_22MBPS = 8, - CONF_HW_RATE_INDEX_24MBPS = 9, - CONF_HW_RATE_INDEX_36MBPS = 10, - CONF_HW_RATE_INDEX_48MBPS = 11, - CONF_HW_RATE_INDEX_54MBPS = 12, - CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, -}; - -struct conf_sg_settings { - /* - * Defines the PER threshold in PPM of the BT voice of which reaching - * this value will trigger raising the priority of the BT voice by - * the BT IP until next NFS sample interval time as defined in - * nfs_sample_interval. - * - * Unit: PER value in PPM (parts per million) - * #Error_packets / #Total_packets - - * Range: u32 - */ - u32 per_threshold; - - /* - * This value is an absolute time in micro-seconds to limit the - * maximum scan duration compensation while in SG - */ - u32 max_scan_compensation_time; - - /* Defines the PER threshold of the BT voice of which reaching this - * value will trigger raising the priority of the BT voice until next - * NFS sample interval time as defined in sample_interval. - * - * Unit: msec - * Range: 1-65000 - */ - u16 nfs_sample_interval; - - /* - * Defines the load ratio for the BT. - * The WLAN ratio is: 100 - load_ratio - * - * Unit: Percent - * Range: 0-100 - */ - u8 load_ratio; - - /* - * true - Co-ex is allowed to enter/exit P.S automatically and - * transparently to the host - * - * false - Co-ex is disallowed to enter/exit P.S and will trigger an - * event to the host to notify for the need to enter/exit P.S - * due to BT change state - * - */ - u8 auto_ps_mode; - - /* - * This parameter defines the compensation percentage of num of probe - * requests in case scan is initiated during BT voice/BT ACL - * guaranteed link. - * - * Unit: Percent - * Range: 0-255 (0 - No compensation) - */ - u8 probe_req_compensation; - - /* - * This parameter defines the compensation percentage of scan window - * size in case scan is initiated during BT voice/BT ACL Guaranteed - * link. - * - * Unit: Percent - * Range: 0-255 (0 - No compensation) - */ - u8 scan_window_compensation; - - /* - * Defines the antenna configuration. - * - * Range: 0 - Single Antenna; 1 - Dual Antenna - */ - u8 antenna_config; - - /* - * The percent out of the Max consecutive beacon miss roaming trigger - * which is the threshold for raising the priority of beacon - * reception. - * - * Range: 1-100 - * N = MaxConsecutiveBeaconMiss - * P = coexMaxConsecutiveBeaconMissPrecent - * Threshold = MIN( N-1, round(N * P / 100)) - */ - u8 beacon_miss_threshold; - - /* - * The RX rate threshold below which rate adaptation is assumed to be - * occurring at the AP which will raise priority for ACTIVE_RX and RX - * SP. - * - * Range: HW_BIT_RATE_* - */ - u32 rate_adaptation_threshold; - - /* - * The SNR above which the RX rate threshold indicating AP rate - * adaptation is valid - * - * Range: -128 - 127 - */ - s8 rate_adaptation_snr; -}; - -enum conf_rx_queue_type { - CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ - CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ -}; - -struct conf_rx_settings { - /* - * The maximum amount of time, in TU, before the - * firmware discards the MSDU. - * - * Range: 0 - 0xFFFFFFFF - */ - u32 rx_msdu_life_time; - - /* - * Packet detection threshold in the PHY. - * - * FIXME: details unknown. - */ - u32 packet_detection_threshold; - - /* - * The longest time the STA will wait to receive traffic from the AP - * after a PS-poll has been transmitted. - * - * Range: 0 - 200000 - */ - u16 ps_poll_timeout; - /* - * The longest time the STA will wait to receive traffic from the AP - * after a frame has been sent from an UPSD enabled queue. - * - * Range: 0 - 200000 - */ - u16 upsd_timeout; - - /* - * The number of octets in an MPDU, below which an RTS/CTS - * handshake is not performed. - * - * Range: 0 - 4096 - */ - u16 rts_threshold; - - /* - * The RX Clear Channel Assessment threshold in the PHY - * (the energy threshold). - * - * Range: ENABLE_ENERGY_D == 0x140A - * DISABLE_ENERGY_D == 0xFFEF - */ - u16 rx_cca_threshold; - - /* - * Occupied Rx mem-blocks number which requires interrupting the host - * (0 = no buffering, 0xffff = disabled). - * - * Range: u16 - */ - u16 irq_blk_threshold; - - /* - * Rx packets number which requires interrupting the host - * (0 = no buffering). - * - * Range: u16 - */ - u16 irq_pkt_threshold; - - /* - * Max time in msec the FW may delay RX-Complete interrupt. - * - * Range: 1 - 100 - */ - u16 irq_timeout; - - /* - * The RX queue type. - * - * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, - */ - u8 queue_type; -}; - -#define CONF_TX_MAX_RATE_CLASSES 8 - -#define CONF_TX_RATE_MASK_UNSPECIFIED 0 -#define CONF_TX_RATE_MASK_ALL 0x1eff -#define CONF_TX_RATE_RETRY_LIMIT 10 - -struct conf_tx_rate_class { - - /* - * The rates enabled for this rate class. - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 enabled_rates; - - /* - * The dot11 short retry limit used for TX retries. - * - * Range: u8 - */ - u8 short_retry_limit; - - /* - * The dot11 long retry limit used for TX retries. - * - * Range: u8 - */ - u8 long_retry_limit; - - /* - * Flags controlling the attributes of TX transmission. - * - * Range: bit 0: Truncate - when set, FW attempts to send a frame stop - * when the total valid per-rate attempts have - * been exhausted; otherwise transmissions - * will continue at the lowest available rate - * until the appropriate one of the - * short_retry_limit, long_retry_limit, - * dot11_max_transmit_msdu_life_time, or - * max_tx_life_time, is exhausted. - * 1: Preamble Override - indicates if the preamble type - * should be used in TX. - * 2: Preamble Type - the type of the preamble to be used by - * the policy (0 - long preamble, 1 - short preamble. - */ - u8 aflags; -}; - -#define CONF_TX_MAX_AC_COUNT 4 - -/* Slot number setting to start transmission at PIFS interval */ -#define CONF_TX_AIFS_PIFS 1 -/* Slot number setting to start transmission at DIFS interval normal - * DCF access */ -#define CONF_TX_AIFS_DIFS 2 - - -enum conf_tx_ac { - CONF_TX_AC_BE = 0, /* best effort / legacy */ - CONF_TX_AC_BK = 1, /* background */ - CONF_TX_AC_VI = 2, /* video */ - CONF_TX_AC_VO = 3, /* voice */ - CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ - CONF_TX_AC_ANY_TID = 0x1f -}; - -struct conf_tx_ac_category { - /* - * The AC class identifier. - * - * Range: enum conf_tx_ac - */ - u8 ac; - - /* - * The contention window minimum size (in slots) for the access - * class. - * - * Range: u8 - */ - u8 cw_min; - - /* - * The contention window maximum size (in slots) for the access - * class. - * - * Range: u8 - */ - u16 cw_max; - - /* - * The AIF value (in slots) for the access class. - * - * Range: u8 - */ - u8 aifsn; - - /* - * The TX Op Limit (in microseconds) for the access class. - * - * Range: u16 - */ - u16 tx_op_limit; -}; - -#define CONF_TX_MAX_TID_COUNT 7 - -enum { - CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ - CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ - CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ -}; - -enum { - CONF_PS_SCHEME_LEGACY = 0, - CONF_PS_SCHEME_UPSD_TRIGGER = 1, - CONF_PS_SCHEME_LEGACY_PSPOLL = 2, - CONF_PS_SCHEME_SAPSD = 3, -}; - -enum { - CONF_ACK_POLICY_LEGACY = 0, - CONF_ACK_POLICY_NO_ACK = 1, - CONF_ACK_POLICY_BLOCK = 2, -}; - - -struct conf_tx_tid { - u8 queue_id; - u8 channel_type; - u8 tsid; - u8 ps_scheme; - u8 ack_policy; - u32 apsd_conf[2]; -}; - -struct conf_tx_settings { - /* - * The TX ED value for TELEC Enable/Disable. - * - * Range: 0, 1 - */ - u8 tx_energy_detection; - - /* - * Configuration for rate classes for TX (currently only one - * rate class supported.) - */ - struct conf_tx_rate_class rc_conf; - - /* - * Configuration for access categories for TX rate control. - */ - u8 ac_conf_count; - struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; - - /* - * Configuration for TID parameters. - */ - u8 tid_conf_count; - struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; - - /* - * The TX fragmentation threshold. - * - * Range: u16 - */ - u16 frag_threshold; - - /* - * Max time in msec the FW may delay frame TX-Complete interrupt. - * - * Range: u16 - */ - u16 tx_compl_timeout; - - /* - * Completed TX packet count which requires to issue the TX-Complete - * interrupt. - * - * Range: u16 - */ - u16 tx_compl_threshold; - -}; - -enum { - CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ - CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ - CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ - CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ - CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F -}; - -#define CONF_MAX_BCN_FILT_IE_COUNT 32 - -#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) -#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) - -#define CONF_BCN_IE_OUI_LEN 3 -#define CONF_BCN_IE_VER_LEN 2 - -struct conf_bcn_filt_rule { - /* - * IE number to which to associate a rule. - * - * Range: u8 - */ - u8 ie; - - /* - * Rule to associate with the specific ie. - * - * Range: CONF_BCN_RULE_PASS_ON_* - */ - u8 rule; - - /* - * OUI for the vendor specifie IE (221) - */ - u8 oui[CONF_BCN_IE_OUI_LEN]; - - /* - * Type for the vendor specifie IE (221) - */ - u8 type; - - /* - * Version for the vendor specifie IE (221) - */ - u8 version[CONF_BCN_IE_VER_LEN]; -}; - -#define CONF_MAX_RSSI_SNR_TRIGGERS 8 - -enum { - CONF_TRIG_METRIC_RSSI_BEACON = 0, - CONF_TRIG_METRIC_RSSI_DATA, - CONF_TRIG_METRIC_SNR_BEACON, - CONF_TRIG_METRIC_SNR_DATA -}; - -enum { - CONF_TRIG_EVENT_TYPE_LEVEL = 0, - CONF_TRIG_EVENT_TYPE_EDGE -}; - -enum { - CONF_TRIG_EVENT_DIR_LOW = 0, - CONF_TRIG_EVENT_DIR_HIGH, - CONF_TRIG_EVENT_DIR_BIDIR -}; - - -struct conf_sig_trigger { - /* - * The RSSI / SNR threshold value. - * - * FIXME: what is the range? - */ - s16 threshold; - - /* - * Minimum delay between two trigger events for this trigger in ms. - * - * Range: 0 - 60000 - */ - u16 pacing; - - /* - * The measurement data source for this trigger. - * - * Range: CONF_TRIG_METRIC_* - */ - u8 metric; - - /* - * The trigger type of this trigger. - * - * Range: CONF_TRIG_EVENT_TYPE_* - */ - u8 type; - - /* - * The direction of the trigger. - * - * Range: CONF_TRIG_EVENT_DIR_* - */ - u8 direction; - - /* - * Hysteresis range of the trigger around the threshold (in dB) - * - * Range: u8 - */ - u8 hysteresis; - - /* - * Index of the trigger rule. - * - * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1 - */ - u8 index; - - /* - * Enable / disable this rule (to use for clearing rules.) - * - * Range: 1 - Enabled, 2 - Not enabled - */ - u8 enable; -}; - -struct conf_sig_weights { - - /* - * RSSI from beacons average weight. - * - * Range: u8 - */ - u8 rssi_bcn_avg_weight; - - /* - * RSSI from data average weight. - * - * Range: u8 - */ - u8 rssi_pkt_avg_weight; - - /* - * SNR from beacons average weight. - * - * Range: u8 - */ - u8 snr_bcn_avg_weight; - - /* - * SNR from data average weight. - * - * Range: u8 - */ - u8 snr_pkt_avg_weight; -}; - -enum conf_bcn_filt_mode { - CONF_BCN_FILT_MODE_DISABLED = 0, - CONF_BCN_FILT_MODE_ENABLED = 1 -}; - -enum conf_bet_mode { - CONF_BET_MODE_DISABLE = 0, - CONF_BET_MODE_ENABLE = 1, -}; - -struct conf_conn_settings { - /* - * Firmware wakeup conditions configuration. The host may set only - * one bit. - * - * Range: CONF_WAKE_UP_EVENT_* - */ - u8 wake_up_event; - - /* - * Listen interval for beacons or Dtims. - * - * Range: 0 for beacon and Dtim wakeup - * 1-10 for x Dtims - * 1-255 for x beacons - */ - u8 listen_interval; - - /* - * Enable or disable the beacon filtering. - * - * Range: CONF_BCN_FILT_MODE_* - */ - enum conf_bcn_filt_mode bcn_filt_mode; - - /* - * Configure Beacon filter pass-thru rules. - */ - u8 bcn_filt_ie_count; - struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; - - /* - * The number of consequtive beacons to lose, before the firmware - * becomes out of synch. - * - * Range: u32 - */ - u32 synch_fail_thold; - - /* - * After out-of-synch, the number of TU's to wait without a further - * received beacon (or probe response) before issuing the BSS_EVENT_LOSE - * event. - * - * Range: u32 - */ - u32 bss_lose_timeout; - - /* - * Beacon receive timeout. - * - * Range: u32 - */ - u32 beacon_rx_timeout; - - /* - * Broadcast receive timeout. - * - * Range: u32 - */ - u32 broadcast_timeout; - - /* - * Enable/disable reception of broadcast packets in power save mode - * - * Range: 1 - enable, 0 - disable - */ - u8 rx_broadcast_in_ps; - - /* - * Consequtive PS Poll failures before sending event to driver - * - * Range: u8 - */ - u8 ps_poll_threshold; - - /* - * Configuration of signal (rssi/snr) triggers. - */ - u8 sig_trigger_count; - struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS]; - - /* - * Configuration of signal average weights. - */ - struct conf_sig_weights sig_weights; - - /* - * Specifies if beacon early termination procedure is enabled or - * disabled. - * - * Range: CONF_BET_MODE_* - */ - u8 bet_enable; - - /* - * Specifies the maximum number of consecutive beacons that may be - * early terminated. After this number is reached at least one full - * beacon must be correctly received in FW before beacon ET - * resumes. - * - * Range 0 - 255 - */ - u8 bet_max_consecutive; - - /* - * Specifies the maximum number of times to try PSM entry if it fails - * (if sending the appropriate null-func message fails.) - * - * Range 0 - 255 - */ - u8 psm_entry_retries; -}; - -#define CONF_SR_ERR_TBL_MAX_VALUES 14 - -struct conf_mart_reflex_err_table { - /* - * Length of the error table values table. - * - * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES - */ - u8 len; - - /* - * Smart Reflex error table upper limit. - * - * Range: s8 - */ - s8 upper_limit; - - /* - * Smart Reflex error table values. - * - * Range: s8 - */ - s8 values[CONF_SR_ERR_TBL_MAX_VALUES]; -}; - -enum { - CONF_REF_CLK_19_2_E, - CONF_REF_CLK_26_E, - CONF_REF_CLK_38_4_E, - CONF_REF_CLK_52_E -}; - -enum single_dual_band_enum { - CONF_SINGLE_BAND, - CONF_DUAL_BAND -}; - -struct conf_general_parms { - /* - * RF Reference Clock type / speed - * - * Range: CONF_REF_CLK_* - */ - u8 ref_clk; - - /* - * Settling time of the reference clock after boot. - * - * Range: u8 - */ - u8 settling_time; - - /* - * Flag defining whether clock is valid on wakeup. - * - * Range: 0 - not valid on wakeup, 1 - valid on wakeup - */ - u8 clk_valid_on_wakeup; - - /* - * DC-to-DC mode. - * - * Range: Unknown - */ - u8 dc2dcmode; - - /* - * Flag defining whether used as single or dual-band. - * - * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND - */ - u8 single_dual_band; - - /* - * TX bip fem autodetect flag. - * - * Range: Unknown - */ - u8 tx_bip_fem_autodetect; - - /* - * TX bip gem manufacturer. - * - * Range: Unknown - */ - u8 tx_bip_fem_manufacturer; - - /* - * Settings flags. - * - * Range: Unknown - */ - u8 settings; -}; - -#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 -#define CONF_NUMBER_OF_SUB_BANDS_5 7 -#define CONF_NUMBER_OF_RATE_GROUPS 6 -#define CONF_NUMBER_OF_CHANNELS_2_4 14 -#define CONF_NUMBER_OF_CHANNELS_5 35 - -struct conf_radio_parms { - /* - * Static radio parameters for 2.4GHz - * - * Range: unknown - */ - u8 rx_trace_loss; - u8 tx_trace_loss; - s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; - - /* - * Static radio parameters for 5GHz - * - * Range: unknown - */ - u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; - u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; - s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; - - /* - * Dynamic radio parameters for 2.4GHz - * - * Range: unknown - */ - s16 tx_ref_pd_voltage; - s8 tx_ref_power; - s8 tx_offset_db; - - s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS]; - s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS]; - - s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4]; - s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4]; - s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS]; - - u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS]; - u8 rx_fem_insertion_loss; - - /* - * Dynamic radio parameters for 5GHz - * - * Range: unknown - */ - s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5]; - s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5]; - s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5]; - - s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS]; - s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS]; - - s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5]; - s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS]; - - /* FIXME: this is inconsistent with the types for 2.4GHz */ - s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS]; - s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; -}; - -#define CONF_SR_ERR_TBL_COUNT 3 - -struct conf_init_settings { - /* - * Configure Smart Reflex error table values. - */ - struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT]; - - /* - * Smart Reflex enable flag. - * - * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled - */ - u8 sr_enable; - - /* - * Configure general parameters. - */ - struct conf_general_parms genparam; - - /* - * Configure radio parameters. - */ - struct conf_radio_parms radioparam; - -}; - -struct conf_drv_settings { - struct conf_sg_settings sg; - struct conf_rx_settings rx; - struct conf_tx_settings tx; - struct conf_conn_settings conn; - struct conf_init_settings init; -}; - -#endif |